Professional Documents
Culture Documents
Bab 11 Eng PDF
Bab 11 Eng PDF
C H A P T E R E L E V E N
The family sedan segment of the U.S. auto market—especially the Honda Accord and Toyota
Camry—experiences an intense level of competition. The competition between these two cars
illustrates an important cost management issue—striking a balance between product features
and price. The two cars do not differ greatly in price, but most analysts argue that the cost and
price reductions in the 1997 remake of the Camry brought it to the top of U.S. car sales.
Toyota and Honda know that a number of strategic issues are involved in developing a
competitive car, including fuel economy, safety features, low-cost manufacturing methods,
and a competitive price. In this chapter we will discuss how to conduct relevant cost analysis
and strategic analysis of decisions about product pricing, selecting cost-effective manufactur-
ing methods, and deciding when to keep or drop a product, among others.
The decision maker has both short-term and long-term objectives for each type of deci-
sion. A decision with a short-term objective is one whose effects are expected to occur within
about a year from the time of the decision. A decision with a long-term objective is expected
to affect costs and revenues for a period longer than a year. Both types of decisions should
reflect the firm’s overall strategy, but it is often said that the decision maker has a long-term
strategy if the focus is primarily on the decision’s long-term objectives and a short-term strat-
egy if the focus is on the short term.
Decision makers should consider both short-term and long-term effects in making the
best decision. Although the art and science of decision making has many elements, includ-
ing leadership, vision, execution, and other characteristics, cost management provides two
important resources to improve decisions: relevant cost analysis and strategic analysis.
Relevant cost analysis has a short-term focus; strategic analysis has a long-term focus.
Relevant cost analysis and strategic analysis are important parts of the manager’s decision
process.
Fifth: Evaluate
Performance
answering the right question. Strategic thinking is important to avoid decisions that might be
best only in the short term. For example, a plant manager might incorrectly view the choice as
whether to make or to buy a part for a manufactured product when the correct decision might
be to determine whether the product should be redesigned so the part is not needed.
The manager’s second step is to specify the criteria by which the decision is to be made and to
identify the alternative actions. Most often the manager’s principal objective is an easily quanti-
fied, short-term, achievable goal, such as to reduce cost, improve profit, or maximize return on
investment. Other interested parties (e.g., owners or shareholders) have their own criteria for
these decisions. Therefore, a manager most often is forced to think of multiple objectives, both
the quantifiable short-term goals, and the more strategic, difficult-to-quantify goals.
In the third step, a manager performs an analysis in which the relevant information is
developed and analyzed, using relevant cost analysis and strategic analysis. This step involves
three sequential activities. The manager (1) identifies and collects relevant information about
the decision, (2) makes predictions about the relevant information, and (3) considers the stra-
tegic issues involved in the decision.
Fourth, based on the relevant cost analysis and strategic analysis, the manager selects the
best alternative and implements it. In the fifth and final step, the manager evaluates the per-
formance of the implemented decision as a basis for feedback to a possible reconsideration
of this decision as it relates to future decisions. The decision process is thus a feedback-based
system in which the manager continually evaluates the results of prior analyses and decisions
to discover any opportunities for improvement in decision making.
regardless of the car you select. Suppose further that you have narrowed your choice to two
vehicles, and the dealer for one is located some distance away, while the other dealer is nearby.
The costs of travel to the different dealers are irrelevant; they are “sunk” at the time the deci-
sion is made to travel to both dealers (see Exhibit 11.2).
LEARNING OBJECTIVE 1 A relevant cost can be either variable or fixed. Generally, variable costs are relevant for
Define the decision-making decision making because they differ for each option and have not been committed. In contrast,
process and identify the types fixed costs often are irrelevant, since typically they do not differ for the options. Overall,
of cost information relevant for variable costs often are relevant but fixed costs are not. So the use of the concept of relevant
decision making.
cost follows naturally from the development of the methods we used in cost estimation, cost-
volume-profit analysis, and master budgeting in prior chapters.
Occasionally, some variable costs are not relevant. For example, assume that a manager is
considering whether to replace or repair an old machine. If the electrical power requirements
of the new and old machines are the same, the variable cost of power is not relevant. Some
fixed costs can be relevant. For example, if the new machine requires significant modifica-
tions to the plant building, the cost of the modifications (which are fixed costs) are relevant
because they are not yet committed.
To illustrate, assume a machine was purchased for $4,200 a year ago, it is depreciated over
two years at $2,100 per year, and it has no trade-in or disposal value. At the end of the first
year, the machine has a net book value of $2,100 ($4,200 $2,100) but the machine needs
to be repaired or replaced. Assume that the purchase price of a new machine is $7,000 and it
is expected to last for one year with little or no expected trade-in or disposal value. The repair
of the old machine would cost $3,500 and would be sufficient for another year of productive
use. The power for either machine is expected to cost $2.50 per hour. The new machine is
semiautomated, requiring a less-skilled operator and resulting in a reduction of average labor
costs from $10.00 to $9.50 per hour for the new machine. If the firm is expected to operate
at a 2,000-hour level of output for the next year, the total variable costs for power will be
$2,000 $2.50 $5,000 for either machine, and labor costs will be $19,000 ($9.50 2,000)
and $20,000 ($10 2,000) for the new and old machines respectively.
Old machine
Level of output 2,000 hours/year
Current net book value $2,100
Useful life (if repaired) 1 year
Operating cost (labor) $10 per hour
Repair cost $3,500
New machine
Level of output 2,000 hours/year
Purchase price $7,000
Useful life 1 year
Operating cost (labor) $9.50 per hour
The summary of relevant costs for this decision is in Exhibit 11.3, showing a $2,500 advan-
tage for repairing the old machine. The $1,000 decrease in labor costs for the new machine is
less than the $3,500 difference of replacement cost over repair cost ($7,000 $3,500). Note
that the power costs and the depreciation on the old machine are omitted because they are not
relevant; they do not differ between the options.
To show that the analysis based on total costs provides the same answer, Exhibit 11.4
shows the analysis for total costs that includes the power costs and the depreciation of the old
machine; neither cost is relevant. The left portion of Exhibit 11.4 is the same as Exhibit 11.3.
Note that both analyses lead to the same conclusion. The relevant cost approach in Exhibit 11.3
is always preferred, however, because it is simpler and, therefore less prone to error; it also
provides better focus for the decision maker.
Setup Costs for New Machine Setup Costs for Old Machine
$9.50 per hour for labor $10 per hour for labor
120 setups per year 120 setups per year
1 hour per setup 4 hours per setup
$1,140 $4,800
The new machine saves $3,660 ($4,800 $1,140) in setup labor as well as $1,000 in direct
labor. The labor savings total is $4,660 ($3,660 $1,000). This more than offsets the excess of
the cost of the new machine over the cost of repair, $3,500 ($7,000 $3,500), for a $1,160
($4,660 $3,500) net benefit of replacing the machine. See the revised analysis in Exhibit 11.5.
Strategic Analysis
The task of management is not to apply a formula but to decide issues on a case-by-case
basis. No fixed, inflexible rule can ever be substituted for the exercise of sound business
judgment in the decision-making process.
Alfred P. Sloan, early president and CEO of General Motors
Alfred Sloan had an important role in developing many of the financial management tools
we use today, including relevant cost analysis and strategic analysis. Sloan knew that an inflex-
ible “run the numbers” approach would not lead to good decision making. Instead, he used a
consideration of the business and competitive context of the decision, together with the use
of relevant costs, which we call strategic cost analysis. A consideration of the business and
competitive context of the decision, together with an understanding of the firm’s strategy and
the relevant costs ensures that each decision will advance the firm’s strategy, performance,
and success.
To illustrate, a strategic decision to design the manufacturing process for high efficiency to
produce large batches of product reduces overall production costs. At the same time, it might
reduce the firm’s flexibility to manufacture a variety of products and thus could increase the
cost to produce small, specialized orders. The decision regarding cost efficiency cannot be
separated from the determination of marketing strategy, that is, deciding what types and sizes
of orders can be accepted.
For another example, the decision to buy rather than to make a part for the firm’s prod-
uct might make sense on the basis of relevant cost but might be a poor strategic move
if the firm’s competitive position depends on product reliability that can be maintained
only by manufacturing the part in-house. A good indication of a manager’s failing to take
a strategic approach is that the analysis will have a product cost focus, while a strategic
cost analysis also addresses broad and difficult-to-measure strategic issues. The strategic
analysis directly focuses on adding value to the customer, going beyond only cost issues.
(See Exhibit 11.6.)
We now consider the application of the relevant cost analysis and strategic cost analysis
to four types of decisions that management accountants often face. For each decision, we
develop the cost information that should be used. In the decision to make the best use of
capacity, this cost information includes both relevant cost analysis and strategic cost analysis
as discussed earlier. The four decisions are as follows: (1) the special order decision; (2) the
make, lease, or buy decision; (3) the decision to sell before or after additional processing; and
(4) profitability analysis.
TTS’s master budget of manufacturing costs for the current year is given in Exhibit 11.7.
The budget is based on expected production of 200,000 T-shirts from an available capacity
of 250,000. The 200,000 units are expected to be produced in 200 different batches of 1,000
units each. The three groups of cost elements are as follows:
1. Unit-level costs vary with each shirt printed and include the cost of the shirt ($3.25 each),
ink ($0.95 each), and labor ($0.85), for a total of $5.05.
2. Batch-level costs vary, in part, with the number of batches produced. The batch-level costs
include machine setup, inspection, and materials handling. These costs are partly variable
(change with the number of batches) and partly fixed. For example, setup costs are $130
per setup ($26,000 for 200 setups) plus $29,000 fixed costs that do not change with the
number of setups (e.g., setup tools or software). Setup costs for 200 batches total $55,000
($26,000 $29,000). Similarly, inspection costs are $30 per batch plus $9,000 fixed
costs—$15,000 total [($30 200) $9,000]. Materials-handling costs are $40 per batch
plus $7,000 fixed costs—$15,000 total [($40 200) $7,000]
3. Plant-level costs are fixed and do not vary with the number of either units produced or
batches. These costs include depreciation and insurance on machinery ($315,000) and
other fixed costs ($90,000), for a total of $405,000. Total fixed cost is the sum of fixed
batch-level costs ($45,000) and fixed facilities-level costs ($405,000), or $450,000. And
the total cost estimation equation for TTS is
Exhibit 11.8 presents TTS’s analysis of the relevant costs. The ABG order requires the
same unprinted T-shirt, ink, and labor time as other shirts, for a total of $5.05 per unit. In addi-
tion, TTS uses $200 of batch-level costs for each order.
The correct analysis for this decision is to determine the relevant costs of $5.25, and then
to compare the relevant costs to the special order price of $6.50. The irrelevant costs are not
considered because they remain the same whether or not TTS accepts the ABG order. There is
a $1.25 ($6.50 5.25) contribution to income for each shirt sold to Alpha Beta Gamma, or a
total contribution of $1,250.
Strategic Analysis
The relevant cost analysis developed for TTS provides useful information regarding the order’s
profitability. However, for a full decision analysis, TTS also should consider the strategic fac-
tors of capacity utilization and short-term versus long-term pricing.
Exhibit 11.9 shows the effect of accepting the Alpha Beta Gamma order at full capacity; under
full capacity, the Alpha Beta Gamma order would reduce total profits by $2,500 due to lost sales.
Short-term pricing for special orders uses relevant cost information. assessed lower than their credit scores. Analytical pricing is based
For long-term pricing, the firm considers competitive issues as well on computer and statistical models of consumer-based information.
as cost information. The two following examples illustrate this. Hotels and retailers use “dynamic pricing” (also based on analytics)
Some firms take a “value” approach to pricing. In what is com- to adjust the price for the expected demand, inventory level, competi-
monly known as value-based pricing, many firms set prices based on tor behavior, and customer history.
the overall value the firm can deliver to the customer, including cus- In the textile industry, increased global price competition has
tomer service, assistance with installation and training for the prod- forced many producers to find special markets. Some of these firms,
uct or service, and finding ways for the product or service to save the such as Blumenthal Print Works, cater to special order customers
customer money. by providing in-house dyeing and finishing and a proprietary chenille
In another example, Dell Computer Corp. continues its domi- product to attract the small order special customers. Blumenthal
nance in the PC market by using a computer-based pricing system does not try to compete with the low-cost, high-volume producers,
that allows the firm to adjust prices throughout the day for different who face the greatest competition from abroad.
customers in different industries with different order quantities and
delivery dates. One key ingredient of the pricing system is accurate, Sources: Thomas H. Davenport and Jeanne G. Harris, Competing on
Analytics, Harvard Business School Press, 2007, p. 91; “The Power of Smart
up-to-date cost information, and precise forecasts of materials costs Pricing,” Business Week, April 10, 2000, pp. 160–164; Gary McWilliams, “Dell
and availability for the next six months. The system helps Dell main- Fine-Tunes Its PC Pricing to Gain an Edge in a Slow Market,” The Wall Street
tain its position as the low-cost, low-price source for PCs. Journal, June 8, 2001; Gina Donlin, “Looking for Niches,” Upholstery Design &
Also, some firms such as Capital One and Progressive Insurance Management, February 2004, p. 8.
use analytical pricing methods to attract customers whose risk is
their excessive relevant cost pricing because a strategy of continually focusing on the short-
term can deny a company a successful long-term. Special order pricing decisions should not
become the centerpiece of a firm’s strategy.
The relevant cost information for the make-or-buy decision is developed in a manner simi-
lar to that of the special order decision. The relevant cost information for making the compo-
nent consists of the short-term costs to manufacture it, ordinarily the variable manufacturing
costs, which would be saved if the part is purchased. These costs are compared to the purchase
price for the part or component to determine the appropriate decision. Costs that will not
change whether the firm makes the part or not are ignored. For example, consider Blue Tone
Manufacturing, maker of clarinets and other reed-based musical instruments. Suppose that
Blue Tone is currently manufacturing the mouthpiece for its clarinet but has the option to
buy it from a supplier. The mouthpiece is plastic, while the remainder of the clarinet is made
from wood. The following cost information assumes that fixed overhead costs will not change
whether Blue Tone chooses to make or buy the mouthpiece:
In this example, the relevant cost to make is $21.50. Since the decision will not affect fixed
overhead, the total $27.50 cost is irrelevant. The relevant cost to make is $2.50 less than the
purchase cost. The next step is for Blue Tone to complete a strategic analysis that considers,
for example, the quality of the part, the reliability of the supplier, and the potential alternative
uses of Blue Tone’s plant capacity. With the combined cost and strategic analysis, Blue Tone
is prepared to make the decision.
A similar situation arises when a firm must choose between leasing or purchasing a piece
of equipment. Such decisions are becoming ever more frequent as the cost and terms of leas-
ing arrangements continue to become more favorable.
To illustrate the lease or buy decision, we use the example of Quick Copy, Inc., a firm that
provides printing and duplicating services and other related business services. Quick Copy
uses one large copy machine to complete most big jobs. It leases the machine from the manu-
facturer on an annual basis that includes general servicing. The annual lease includes both a
fixed fee of $40,000 and a per copy charge of $0.02.
The copier manufacturer has suggested that Quick Copy upgrade to the latest model
copier that is not available for lease but must be purchased for $160,000. Quick Copy would
use the purchased copier for one year, after which it could sell it back to the manufacturer
for one-fourth the purchase price ($40,000). In addition, the new machine has a required
annual service contract of $20,000 which includes all repair, service, and replacement of ink
cartridges. Quick Copy’s options for the coming year are to renew the lease for the current
copier or to purchase the new copier. The relevant information is outlined in Exhibit 11.10.
Although the make-or-buy decision is commonly thought to affect For example, one human resource manager participating in the
parts and components of products, it can also apply to services, study said that his company keeps the employee relations function
including human resource management, internal auditing, security, within the firm but outsources other HR functions. When an employee
maintenance and repair, and other service activities performed within relations problem arises, he explained, we need “someone from the
the firm. Many firms have chosen to outsource these functions, based company who can do something about the problem, and we can’t out-
in part on the concepts of relevant and strategic cost analysis. For source the mechanism that communicates to employees that we care
example, to maintain a human resource (HR) function within a firm about them.”
requires certain fixed and variable costs related to the number of Make or buy analysis is also commonly used in determining
employees. Alternatively, to outsource the function, the firm incurs a whether to outsource public services. Writing in Governmental
fixed fee or a fee that combines fixed and variable elements. The firm Finance Review, R. Gregory Michel illustrates a case study in which
can determine the short-term cost of either approach as a basis for a five-year analysis is used to compare the cost of retaining the serv-
deciding between them. The firm also must consider the longer term ice, lawn and grounds maintenance, or to outsource the service. The
strategic factors in the decision, as noted in the results of a recent analysis used the time value of money, and accordingly discounted
study of the HR policies at 25 large companies. The survey showed the future cost figures, because of the five-year time horizon.
that these human resource management functions should not be Source: Charles R. Greer and Stuart A. Youngblood, “Human Resource
outsourced: Management Outsourcing: The Make or Buy Decision,” The Academy of
Management Executive, August 1999, pp. 85–96;. R. Gregory Michel, “Make or
• Labor/union relations Buy? Using Cost Analysis to Decide Whether to Outsource Public Services,”
• Employee relations Government Finance Review, August 2004, pp. 13–21.
• Performance measurement
The lease-or-buy decision will not affect the cost of paper, electrical power, and employee
wages, so these costs are irrelevant and are excluded from the analysis. For simplicity, we
also ignore potential tax effects of the decision and the time value of money.
The initial step in the analysis is to determine which machine produces lowest total cost.
The answer depends on the expected annual number of copies. Using cost-volume-profit anal-
ysis (Chapter 9 and Exhibit 11.11), Quick Copy’s manager determines the indifference point,
the number of copies at which both machines cost the same. The calculations are as follows,
where Q is the number of copies:
Lease cost Purchase cost
Annual fee + Per copy charge Net purchase cost Service contract
$40,000 ($0.02 Q ) ($160,000 $40,000) $20,000
Q $100,000/$0.02
5,000,000 copies per year
EXHIBIT 11.11
The Lease or Buy Example
40,000
Q 5,000,000
Number of Copies per Year
440
The indifference point, 5,000,000 copies, is lower than the expected annual machine usage
of 6,000,000 copies. This indicates that Quick Copy will have lower costs by purchasing the
new machine. Costs will be lower by $20,000:
Cost of lease Cost of purchase
[$40,000 ($0.02 6,000,000)] ($160,000 $40,000 $20,000)
$160,000 $140,000
$20,000 in favor of purcchase
In addition to the relevant cost analysis, Quick Copy should consider strategic factors such
as the quality of the copy, the reliability of the machine, the benefits and features of the ser-
vice contracts, and any other factors associated with the use of the machine that might prop-
erly influence the decision.
Strategic Analysis
The make, lease, or buy decision often raises strategic issues. For example, a firm using
value-chain analysis could find that certain of its activities in the value chain can be more
profitably performed by other firms. The practice of choosing to have an outside firm provide
a basic service function is called outsourcing. Make, lease, or buy analysis has a key role in
the decision to outsource by providing an analysis of the relevant costs. Many firms recently
have considered outsourcing manufacturing and data processing, janitorial, or security serv-
ices to improve profitability. Thomas Friedman, in his recent book, The World Is Flat: A Brief
History of the Twenty-First Century, explains the breadth of outsourcing practices in the world
today.1 Even such simple activities as taking hamburger orders at the drive-thru of a fast food
restaurant are being outsourced around the world.
Because of the important strategic implications of a choice to make, lease, or buy, these
decisions are often made on a two- to five-year basis, using projections of expected relevant
costs and taking into account the time value of money (Chapter 12) where appropriate.
1
Thomas L. Friedman, The World Is Flat: A Brief History of the Twenty-First Century (New York: Farrar, Straus, and Giroux, 2005).
See also, Thomas L. Friedman, Hot, Flat, and Crowded, Farrar, Straus, and Giroux, New York, 2008.
A recent study of 328 U.S. manufacturing firms revealed that the pur- purchasing managers also tend to prefer to use a number of suppli-
chasing managers at most of these firms prefer to purchase parts ers in order to develop multiple sourcing relationships. For example,
from outside suppliers rather than to assign the work to an internal in recent years General Motors (in its U.S. operations) had approxi-
manufacturing unit. Factors given as favoring outsourcing include mately 3,500 suppliers, while Toyota in Japan had only about 200.
the quality and speed of delivery for the external suppliers, while How does Toyota keep such a relatively small number of suppliers?
factors favoring insourcing include concerns for capacity utilization, (Refer to Comments on Cost Management in Action at end of Chapter.)
overhead absorption, employee loyalty, and union contracts. The
the ink, supplies, and labor, totaling $1.80 per shirt, plus the setup, inspection, and materials-
handling costs for a batch of product. See the relevant cost analysis in Exhibit 11.12. Note that
the cost of the unprinted T-shirt is the same for both options and is therefore irrelevant.
The analysis shows there is an $880 advantage to reprinting the shirts rather than selling
the defective shirts to discount stores.
Strategic Analysis
Strategic concerns arise when considering selling to discount stores. Will this affect the sale
of T-shirts in retail stores? Will the cost of packing, delivery, and sales commissions differ for
these two types of sales? TTS management must carefully consider these strategic issues in
addition to the information provided in the relevant cost analysis in Exhibit 11.12.
Profitability Analysis
The analysis of Gale should begin with the important observation that the $3.54 fixed
cost per unit is irrelevant for the analysis of the current profitability of the three products.
Because the $168,000 total fixed costs are unchangeable in the short run, they are irrelevant
for this analysis. That is, no changes in product mix, including the deletion of Gale, will affect
total fixed costs in the coming year. The fact that the fixed costs are irrelevant is illustrated
by comparing the contribution income statements in Exhibit 11.14, which assumes that Gale
is dropped, and Exhibit 11.15, which assumes that Gale is kept. The only changes caused by
dropping Gale are the loss of its revenues and the elimination of variable costs. We assume
there is no effect on the sales or costs of the other two products. Thus, dropping Gale causes
a reduction in total contribution margin of $4 per unit times 3,750 units of Gale sold, or
$15,000, and a corresponding loss in operating profit ($15,000 $147,000 $132,000).
Assume that further analysis shows that $60,000 of the $168,000 fixed costs are advertising
costs to be spent directly on each of the three products: $25,000 for Calm, $15,000 for Windy,
and $20,000 for Gale. The remainder of the fixed costs, $108,000 ($168,000 $60,000), are
not traceable to any of the three products and are therefore allocated to each product as before.
Because advertising costs are directly traceable to the individual products, and assuming that
the advertising plans for Gale can be canceled without additional cost, the $20,000 of adver-
tising costs for Gale should be considered a relevant cost in the decision to delete Gale. This
cost will differ in the future.
Exhibit 11.16 shows that the total contribution margin for Gale is now a net loss of $5,000,
providing a potential $5,000 gain by dropping Gale because of the expected $20,000 savings
in avoidable advertising costs. Alternatively, management may choose to forgo the advertising
for Gale and assess whether sales will fall with the loss of advertising; Gale could be profitable
without advertising. We can interpret the contribution figures for Calm and Windy in the same
way. The loss in deleting Calm or Windy would be $125,000 and $135,000, respectively.
Strategic Analysis
In addition to the relevant cost analysis, the decision to keep or drop a product line should
include relevant long-term strategic factors, such as the potential effect of the loss of one
product line on the sales of another. For example, some florists price cards, vases, and other
related items at or below cost to better serve and attract customers to the most profitable prod-
uct, the flower arrangements.
Other important strategic factors include the potential effect on overall employee morale
and organizational effectiveness if a product line is dropped. Moreover, managers should con-
sider the sales growth potential of each product. Will a product considered to be dropped
place the firm in a strong competitive position sometime in the future? A particularly impor-
tant consideration is the extent of available production capacity. If production capacity and
production resources (such as labor and machine time) are limited, consider the relative prof-
itability of the products and the extent to which they require different amounts of these pro-
duction resources.
An example of a user of the contribution income statement is STIHL, Incorporated, a
manufacturer of leaf blowers, chain saws, trimmers, edgers, and many other landscaping
products. STIHL uses the contribution income statement to assess the profitability of both
product lines and customer groups.2
$30,000 from the city council. The analysis for the child-care service’s first year of operation
is shown in Exhibit 11.17, which assumes that 20 children, the maximum number, will use
the service.
The TWC analysis shows that the child-care service will have a deficit of approximately
$9,400 in the first year. Now TWC can decide whether it can make up the deficit from current
funds or by raising additional funds. Relevant cost analysis provides TWC a useful method to
determine the resource needs for the new program.
possibilities can be shown graphically; all sales mix possibilities are represented by all pos-
sible points on the line in Exhibit 11.19. The line in Exhibit 11.19 can be determined as
follows:
Slope 36,000/24,000 3/2
Intercept 36,000
The line in Exhibit 11.19 is thus given by
Units of Gale 36,000 ( 3/2 Units of Windy )
Now that we know the production possibilities, we can determine the best product mix.
Note from Exhibit 11.18 that Windy has the higher overall contribution margin, $160 per hour
(20 jackets per hour $8 per jacket). Because 1,200 machine-hours are available per month,
the maximum total contribution from the production possibilities is to produce only Windy
and achieve the total contribution of 1,200 $160 $192,000 (or $8 per unit 24,000 units
$192,000) per month. If Windbreakers were to produce and sell only Gale, the maximum
total contribution margin would be $144,000 per month (1,200 hours $120 per hour), a
$48,000 reduction over the contribution from selling only Windy. Thus, when there is only one
production constraint and excess demand, it is generally best to focus production and sales on
the product with the highest contribution per unit of scarce resource. Of course, it is unlikely
in a practical situation that a firm would be able to adopt the extreme position of deleting one
EXHIBIT 11.19
Windbreakers Production and Given the limited resource, the sewing machine, the
maximum production of Windy and Gale can be found
Sales Possibilities 36,000 at any point on the line shown.
One Production Constraint—The
Units of Sales for Gale
24,000
Units of Sales for Windy
product and focusing entirely on the other. However, the previous results show the value of
considering a strong focus on the more profitable product based on the contribution per unit
of a scarce resource.
EXHIBIT 11.21
Windbreakers Production 67,200
and Sales Possibilities
Two Production Constraints— Production constraint for inspection and packaging
Units of Sales for Gale
24,000
22,400
Units of Sales for Windy
both Gale and Windy. Note that it is not possible to produce more than the 22,400 units of
Windy because all 40 workers inspecting and packing full time would not be able to handle
more than that number, even though the sewing machine is capable of producing 24,000 units.
Similarly, although Windbreakers could pack and ship 67,200 units of Gale by having all 40
packers work full-time on that jacket, the firm could manufacture only 36,000 units of Gale
because of limited capacity on the sewing machines.
The production planner can determine the best production mix by examining all of the pos-
sible production possibilities in the darker shaded area, from 36,000 on the Gale axis to point
A where the constraints intersect, and then to the point 22,400 on the Windy axis. The sales
mix with the highest contribution must be one of these three points: 36,000 of Gale, point A,
or 22,400 units of Windy. The solution, called the corner point analysis, is obtained by find-
ing the total contribution at each point and then choosing the point with the highest contribu-
tion. The solution achieved in this manner is for production at point A, 20,800 units of Windy
and 4,800 units of Gale.3
The analysis of sales mix and production constraints is a useful way for managers to
understand both how a difference in sales mix affects income and how production limita-
tions and capacities can significantly affect the proper determination of the most profitable
sales mix.
Linear programming, a mathematical method, permits the solution of much larger problems involving many products and
production activities. A linear program technique to solve the Windy and Gale case is shown in appendix A. This technique uses
the Solver function of Microsoft Excel.
A recent article in The McKinsey Quarterly (based in part on the 4. Misaligned risk aversion: real or perceived high risk causes man-
research of Kahneman and Tversky cited in footnote 6) presents a agers to avoid potentially very good projects and look for low-risk
useful summary of some of the ways that strategic decisions can go projects instead.
wrong because of human shortcomings: 5. Misaligned time horizon: causes managers to look to a short-term
1. Overconfidence: results in underestimating costs and technical time horizon relevant to their own participation in the business
challenges for the company and in the competitive environment. unit and not the long-term considerations of the firm as a whole.
2. Loss aversion: leads to inaction and failure to take appropriate Source: Dan P. Lovallo and Olivier Sibony, “Distortions and Deceptions in
Strategic Decisions,” The McKinsey Quarterly, number 1, 2006.
risks.
3. Champion bias: provides unvetted support for projects that are
proposed by superiors, thereby adding to the risk of a poor deci-
sion; absence of appropriate critique and dissent.
has stood the test of time, because all 37 predatory pricing cases since its 1993 decision
have been found in favor of the defendant. In spite of this, some economists and lawyers
in 1999–2000 believed that economic theories of competition had changed since 1993.
On the basis of these new theories, they took issue with the aggressive pricing practices
of American Airlines, especially at the Dallas–Fort Worth airport, where a number of
competing carriers had been driven to financial distress. In 2001 their suit against Amer-
ican was thrown out by a federal judge, causing some to argue this is the end of suits
regarding predatory pricing. Another example of the failure of a predatory pricing suit is
the case of a small chain of convenience stores, in which activity-based costing assisted
the defendant to support its position that it was not selling gasoline below cost.4
A variation on the issue of predatory pricing is the recent increase in the number of coun-
tries levying fines against global firms for “dumping” their products at anticompetitive prices.
A recent World Trade Organization report shows the number of cases per year increased by
100 percent from 1995 to 2000 and then decreased by 30% from 2000 to 2005. The U.S. anti-
dumping laws were enacted more than 90 years ago to protect against predatory pricing by
global firms exporting to the United States. The laws state that the import price cannot be lower
than the cost of production or the price in the home market. Unfortunately the laws often have
been used to protect uncompetitive industries in the home country. Facing increasing global
pressure on the issue, U.S. congressional leaders are debating the need to reform the U.S. law.5
margin increases. Management’s proper goal is to maximize contribution margin and to mini-
mize fixed operating costs at the same time. Managers should use relevant cost analysis as a tool
to maximize contribution and must also develop methods to manage fixed costs.
Summary Relevant cost analysis uses future costs that differ for the decision maker’s options. The prin-
ciple of relevant cost analysis can be applied in a number of specific decisions involving man-
ufacturing, service, and not-for-profit organizations. The decisions considered in the chapter
include
• The special order decision for which the relevant costs are the direct manufacturing costs
and any incremental fixed costs.
• The make, lease, or buy decision for which the relevant costs are the direct manufacturing
costs and any avoidable fixed costs.
• The decision to sell a product before or after additional processing for which the relevant
costs are the additional processing costs.
• The decision to keep or drop a product line or service for which the relevant costs are the
direct costs and any fixed costs that change if the product or service is dropped.
• The decision of a not-for-profit organization to offer a service.
Strategic analysis complements relevant cost analysis by having the decision maker con-
sider the strategic issues involved in the situation.
When two or more products or services are involved, another type of decision must be
made: to determine the correct product mix. The solution depends on the number of produc-
tion activities that are at full capacity. With one production constraint, the answer is to pro-
duce and sell as much as possible of the product that has the highest contribution margin per
unit of time on the constrained activity. With two or more constrained activities, the analysis
uses graphical and quantitative methods to determine the correct product mix.
A number of key behavioral, implementation, and legal issues must be considered in using
relevant cost analysis. Many who use the approach fail to give sufficient attention to the firm’s
long-term, strategic objectives. Too strong a focus on relevant costs can cause the manager
to overlook important opportunity costs and strategic considerations. Other issues include
the tendency to replace variable costs with fixed costs when relevant cost analysis is used in
performance evaluation and the pervasive tendency of people not to correctly view fixed costs
as sunk but to view them as somehow controllable and relevant.
6
For a comprehensive coverage of decision-making biases, see John S. Hammond, Ralph L. Keeney, and Howard Raiffa, “The
Hidden Traps in Decision Making,” Harvard Business Review, September–October 1998, pp. 47–58; also D. L. Heerema and R. L.
Rogers, “Is Your Cost Accounting System Benching Your Team Players?” Management Accounting, September 1991, pp. 35–40,
gives useful illustrations of the improper use of relevant cost analysis in the automobile industry, the military, and elsewhere.
Prospect theory suggests that people underweigh alternatives that are uncertain in comparison to alternatives known to be
certain. The theory has been offered as a potential explanation of the tendency people have to include sunk costs in decision
making. See D. Kahneman and A. Tversky, “Prospect Theory: An Analysis of Decision under Risk,” Econometrica, March 1979,
pp. 263–92; and Glen Whyte, “Escalating Commitment to a Course of Action: A Reinterpretation,” Academy of Management
Review, 1986, pp. 311–21.
Appendix
Linear Programming and the Product Mix Decision
Linear programming This appendix explains how linear programming can be used to solve product mix decisions such
is a mathematical technique that as the Windbreakers case illustrated in the chapter. Linear programming is particularly useful
can be used to solve for the best when the product mix decision involves three or more constraints since these larger problems are
product mix. difficult to solve graphically or with the simple corner point analysis explained in the chapter. A
Solver number of linear programming tools are available; we use the Solver function of Microsoft Excel
is a an analytical tool available because of its wide availability. To access this tool, you simply install it when installing Excel;
on the Data tab in Excel that Solver will appear as an option on Excel’s Data tab. If Solver is not installed for your Excel, go
can be used to solve linear to the Office button at the top left of the Excel spreadsheet and then choose Excel Options. In the
programming problems.
next screen choose Add-ins on the left of the screen and then choose Solver Add-in.
The first step in using Solver is to enter the data for the problem into an Excel spreadsheet,
in the form shown in Exhibit 11A.1.
Column A: Shows the product names.
Column B: Solver requires an initial guess at what might be an appropriate solution; for
this purpose, we chose the point 10,000 units of Windy and 2,000 units of Gale; the point
should be any of the possible points within the feasible region shown as the darker shaded
area in Exhibit 11.21 on page 447.
Columns C, D, and E: These contain data entered from the problem information.
Columns F, G, and H: These contain formulas based on the data in columns, C, D, and E;
for example, cell F5 contains B5 C5; cell G5 contains B5 D5, and so on.
EXHIBIT 11A.1 Enter Data and Solver Parameters: Solution for the Windy and Gale Problem
EXHIBIT 11A.2 Solver Solution for the Windy and Gale Problem
The second step in using Solver is to enter the parameters as shown in the dialog box
in Exhibit 11A.1. The dialog box appears by selecting Solver from the Data tab. Note that
the target cell is total contribution, located in cell F7, which currently shows the total con-
tribution for sales of 10,000 units of Windy and 2,000 units of Gale. The “By Changing
Cells” section includes those cells representing the total sales of Windy and Gale, now set
at an initial value of 10,000 and 2,000 units, respectively. Then the constraints for sew-
ing time and inspect and pack time are entered in the “Subject to the Constraints” section
as shown. Finally, select Solve in the dialog box, and the solution appears, as shown in
Exhibit 11A.2.
Notice that cells B5 and B6 in Exhibit 11A.2 now show the solution values for the two
products, and the cells in columns F, G, and H show the total contribution and total use of the
two constraints. At this time, it is possible to see any of three possible additional reports, the
Answer, Sensitivity, and Limit reports as shown in the dialog box. We have selected only the
Answer report for illustration at this time, which is shown in Exhibit 11A.3. This report sum-
marizes the initial and final values for the problem data.
EXHIBIT 11A.3 Solver Solution for the Windy and Gale Problem: Answer Report
Key Terms linear programming, 451 relevant costs, 431 sunk cost, 431
opportunity cost, 434 solver, 451 value stream, 438
predatory pricing, 448
Boeing of $960. Similarly, American Airlines manufactures air filters for its Boeing 777 fleet for $33, in
contrast to the Boeing price of $132. For the air carriers, it is definitely cheaper to make than to buy.
Other trends include a move by some firms to return some manufacturing back to domestic factories, as
the cost of shipping product from China and other countries has increased dramatically with the increase in
fuel prices; the cost of shipping a 40-foot, 5,000-pound container from China to the west coast has increased
from $2,000 in 2000 to $5,000 in 2008.
In another reversal of outsourcing, the financial services industry, suffering through historic losses in
2008, has cut back in 2008 by one-half the amount of 2007 outsourcing in which computer services, cus-
tomer services, and other banking activities are “off-shored.”
Source: “Machete Time,” BusinessWeek, April 9, 2001, pp. 42–43; Melanie Trottman, “To Cut Costs: Airlines Make More of Their
Own Parts; Jettisoning a $719 Toilet Seat,” The Wall Street Journal, Tuesday May 3, 2005, p. B1; Timothy Aeppel, “Stung by Soaring
Transport Costs, Factories Bring Jobs Home Again,” The Wall Street Journal, June 13, 2008, p. 1. “In a Pinch,” The Economist,
October 11, 2008, p. 86.
3. Profitability Analysis
Consider again the Windbreakers firm described in the text. Suppose that Windbreakers determines that drop-
ping the Gale product line will release production capacity so that it can manufacture additional units of
Windy. Assume that, as described in the text, the two production constraints are the automated sewing machine
and the inspection and packing operation. The automated sewing machine can make 20 Windys or 30 Gales per
hour. As before, the inspection operation requires 15 minutes for a Windy (4 per hour) and 5 minutes for a Gale
(12 per hour). Currently, 3,750 Gales and 18,750 Windys are being manufactured and sold. Sales projections
show that sales of Windy could be increased to 30,000 units if additional capacity were available.
Required
1. If Windbreakers deletes Gale entirely, how many units of Windy can it manufacture with the released
capacity?
2. What is the dollar effect on net income if Windbreakers drops the production and sale of Gale and uses
the released capacity for Windy?
3. What other factors should Windbreakers consider in its decision to drop Gale and use the released
capacity to produce additional units of Windy?
Questions 11-1 What are relevant costs? Provide several examples for the decision to repair or replace a piece of
equipment.
11-2 Define outsourcing and explain how the relevant cost analysis model is used in the outsourcing
decision.
11-3 List at least four different decisions for which the relevant cost analysis model can be used
effectively.
11-4 How does the relevant cost analysis model differ for manufacturing and service firms?
11-5 What is the relevant cost when determining whether or not to process a product further?
11-6 List four to six strategic factors that are often important in the make-or-buy decision.
11-7 Explain what not relevant cost means and provide two examples of it.
11-8 Why are variable costs usually more relevant than fixed costs in short-term decision making?
11-9 Give an example of how a firm can decrease variable costs by increasing fixed costs.
11-10 Give an example of how a firm can decrease fixed costs by increasing variable costs.
11-11 How do short-term evaluations affect a manager’s incentives and performance?
11-12 List four or five important limitations of relevant cost analysis.
11-13 How do strategic factors affect the proper use of relevant cost analysis?
11-14 List some of the behavioral, implementation, and legal problems to be anticipated in the use of rel-
evant cost analysis.
11-15 How does the presence of one production constraint affect the relevant cost analysis model? Two or
more production constraints?
11-16 What is the relationship, if any, between the relevant cost analysis method and cost-volume-profit
analysis?
11-17 Explain why depreciation is a nonrelevant cost.
Brief Exercises 11-18 Purchase price is $35 for a part that can be manufactured for $33; the $33 manufacturing costs
include $5 per unit fixed cost. What is the savings to make rather than to buy?
11-19 Products X and Y are produced in a joint process that costs a total of $300,000. At the end of this
process, X can be sold for $20 per unit and Y for $40 per unit. X can be processed further for an
additional $2 per unit and sold for $25. Also, product Y can be processed further for $4 per unit and
sold for $50 per unit. Which product should be processed further, and why?
11-20 Adams Furniture receives a special order for 10 sofas for a special price of $3,000. The materials
and direct labor for each sofa are $100. In addition, the setup, supervision, and other overhead costs
are $150 per sofa. Should Adams accept the special order? Why or why not? Would it make a differ-
ence to your answer if Adams is at full capacity and its current line of sofas sell for $500 each?
11-21 Wings Diner has a box lunch that it sells on football game days at the local university. Each box
lunch sells for $6, which includes $2.50 variable costs and $2.50 fixed cost plus a $1 markup. What
is the lowest price Wings can sell its box lunch so that Wings will still make a profit?
11-22 Williams Auto has a machine that installs tires. The machine now is in need of repair. The machine
originally cost $10,000 and the repair will cost $1,000, but the machine will then last two years. The
variable (labor) cost of operating the machine is $0.50 per tire. Instead of repairing the old machine,
Williams could buy a new machine at a cost of $5,000 that would also last two years; the labor cost
per tire would be reduced to $0.25 per tire. Should Williams repair or replace the machine if it is
installing 10,000 tires in the next two years?
11-23 Ford Manufacturing has received an order from Roy Inc. for 500 sport shirts. Ford could produce the
shirts or Ford could buy the shirts from another supplier to fill the Roy order, at $20 per shirt. The pro-
duction at Ford is $10 per shirt plus $1,000 cost per batch. Which option will be preferable to Ford?
11-24 Jamison Health Care is trying to decide if it should eliminate its orthopedic care division. In the last
year, the orthopedic division had a contribution margin of $100,000 and allocated overhead costs of
$200,000, of which $90,000 could be eliminated if the division is dropped. Should Jamison keep the
division?
11-25 Guthridge Soap Corporation is evaluating a new soap cutting machine that could eliminate some
direct labor costs. The machine would cost $900,000 per year and would cost $0.10 per bar to cut
the soap. Currently, Guthridge uses direct labor to cut the soap into bars, which costs $1 per bar. The
company currently produces 500,000 bars of soap per year. Should it buy the machine?
11-26 ElecPlus Batteries has two different products, AAA and AA batteries. The AA batteries have a con-
tribution margin of $1 per package, and the AAA batteries have a contribution margin of $2 per
package. ElecPlus has a capacity for 1 million batteries per month, and both batteries require the
same amount of processing time. If a special order for 10,000 AAA exceeds the monthly capacity,
should ElecPlus accept the special order?
11-27 Jackson Inc. disposes of other companies’ toxic waste. Currently Jackson loads the waste by hand into
the truck, which requires labor of $20 per load. Jackson is considering a machine that would reduce
the amount of time needed to load the waste. The machine would cost $200,000, but would reduce
labor cost to $5 per load. Should Jackson buy the machine if it averages 10,000 loads per year?
11-28 Durant Co. manufactures glass bottles for dairy products. The contribution margin is $0.10 per bot-
tle. Durant just received notification that one of their orders for 100,000 bottles contained misprinted
labels, and thus had to recall and reprint the bottle labels. If it will cost $0.05 per bottle to reprint the
labels and $1,000 to reship the bottles, what will the net contribution margin be after the recall?
11-29 Wings Airlines targets budget travelers with its low-cost fares. Assume Wings provides no in-flight
service except for meals and beverages that the passengers must pay for. The baggage handling and
gate services are fixed costs. What is the lowest price Wings should charge for a ticket?
11-30 Lance’s Diner has a hot lunch special each weekday and Sunday afternoon. Food and other variable
costs for the lunch are $3.50, and the daily fixed costs are $1,000. Lance has an average of 500 cus-
tomers per day. What is the lowest price Lance should charge for a special group of 200 that wants to
come on Saturday for a family reunion? What should be the lowest price Lance charges on a normal
weekly basis?
11-31 Sweet Dream Hotel has labor costs that are mostly fixed, including registration desk, maintenance,
and general repairs and cleaning. The housekeeping staff is hired in sufficient numbers to clean the
rooms that need cleaning, so that housekeeping is a variable cost for the number of occupied rooms.
Which of these costs is relevant for determining the price of a room?
Exercises 11-32 Special Order Marshall Company recently approached Johnson Corporation regarding manufac-
turing a special order of 4,000 units of product CRB2B. Marshall would reimburse Johnson for all
variable manufacturing costs plus 35 percent. The per-unit data follow:
Johnson would have a retooling cost of $12,000 for the special order. Johnson has no alternative use
of capacity.
11-33 Special Order Alton Inc. is working at full production capacity producing 20,000 units of a unique
product. Manufacturing costs per unit for the product are
Direct materials $ 9
Direct labor 8
Manufacturing overhead 10
Total manufacturing cost $27
The unit manufacturing overhead cost is based on a $4 variable cost per unit and $120,000 fixed
costs. The nonmanufacturing costs, all variable, are $8 per unit, and the sales price is $45 per unit.
Sports Headquarters Company (SHC) has asked Alton to produce 5,000 units of a modifica-
tion of the new product. This modification would require the same manufacturing processes. SHC
has offered to share the nonmanufacturing costs equally with Alton. Alton would sell the modified
product to SHC for $35 per unit.
Required
1. Should Alton produce the special order for SHC? Why or why not?
2. Suppose that Alton Inc. had been working at less than full capacity to produce 16,000 units of the prod-
uct when SHC made the offer. What is the minimum price that Alton should accept for the modified
product under these conditions?
11-34 Make or Buy; Continuation of Problem 9-28 (Chapter 9) Calista Company manufactures electronic
equipment In 2009, it purchased the special switches used in each of its products from an outside
supplier. The supplier charged Calista $2 per switch. Calista’s CEO considered purchasing either
machine X or machine Y so the company could manufacture its own switches. The CEO decided at
the beginning of 2010 to purchase Machine X, based on the following data:
Machine X Machine Y
Annual fixed cost $135,000 $204,000
Variable cost per switch 0.65 0.30
Required
1. For machine X, what is the indifference point between purchasing the machine and purchasing from the
outside vendor?
2. At what volume level should Calista consider purchasing Machine Y?
11-35 Special Order Grant Industries, a manufacturer of electronic parts, has recently received an invita-
tion to bid on a special order for 20,000 units of one of its most popular products. Grant currently man-
ufactures 40,000 units of this product in its Loveland, Ohio, plant. The plant is operating at 50 percent
capacity. There will be no marketing costs on the special order. The sales manager of Grant wants to set
the bid at $9 because she is sure that Grant will get the business at that price. Others on the executive
committee of the firm object, saying that Grant would lose money on the special order at that price.
Required
1. Why does the unit cost decline from $11 to $10 when production level rises from 40,000 to 60,000 units?
2. Is the sales manager correct? What do you think the bid price should be?
3. List some additional factors Grant should consider in deciding how much to bid on this special order.
11-36 Profitability Analysis Barbour Corporation, located in Buffalo, New York, is a retailer of high-
tech products known for its excellent quality and innovation. Recently the firm conducted a relevant
cost analysis of one of its product lines that has only two products, T-1 and T-2. The sales for T-2 are
decreasing and the purchase costs are increasing. The firm might drop T-2 and sell only T-1.
Barbour allocates fixed costs to products on the basis of sales revenue. When the president of
Barbour saw the income statement, he agreed that T-2 should be dropped. If this is done, sales of T-1
are expected to increase by 10 percent next year; the firm’s cost structure will remain the same.
T-1 T-2
Sales $200,000 $260,000
Variable cost of goods sold 70,000 130,000
Contribution margin $130,000 $130,000
Expenses
Fixed corporate costs 60,000 75,000
Variable selling and administration 20,000 50,000
Fixed selling and administration 12,000 21,000
Total expenses $ 92,000 $146,000
Operating income $ 38,000 $ (16,000)
Required
1. Find the expected change in annual operating income by dropping T-2 and selling only T-1.
2. What strategic factors should be considered?
Required Should Terry Inc. accept the offer from the subcontractor? Why or why not?
b. Disposal of Assets A company has an inventory of 2,000 different parts for a line of cars that has
been discontinued. The net book value of inventory in the accounting records is $50,000. The parts
can be either remachined at a total additional cost of $25,000 and then sold for $30,000 or sold as is
for $2,500. What should it do?
c. Replacement of Asset An uninsured boat costing $90,000 was wrecked the first day it was used. It can
be either sold as is for $9,000 cash and replaced with a similar boat costing $92,000 or rebuilt for $75,000
and be brand new as far as operating characteristics and looks are concerned. What should be done?
d. Profit from Processing Further Deaton Corporation manufactures products A, B, and C from a
joint process. Joint costs are allocated on the basis of relative sales value at the end of the joint proc-
ess. Additional information for Deaton Corporation follows:
A B C Total
Units produced 12,000 8,000 4,000 24,000
Joint costs $144,000 $ 60,000 $36,000 $240,000
Sales value before additional
processing 240,000 100,000 60,000 400,000
Additional costs for further
processing 28,000 20,000 12,000 60,000
Sales value if processed further 280,000 120,000 70,000 470,000
Required Which, if any, of products A, B, and C should be processed further and then sold?
e. Make or Buy Eggers Company needs 20,000 units of a part to use in producing one of its products.
If Eggers buys the part from McMillan Company for $90 instead of making it, Eggers could not use
the released facilities in another manufacturing activity. Fifty percent of the fixed overhead will con-
tinue irrespective of CEO Donald Mickey’s decision. The cost data are
Required Determine which alternative is more attractive to Eggers and by what amount.
f. Selection of the Most Profitable Product DVD Production Company produces two basic types of
video games, Flash and Clash. Pertinent data for DVD Production Company follows:
Flash Clash
Sales price $250 $140
Costs
Direct materials 50 25
Direct labor ($25/Hr) 100 50
Variable factory overhead* 50 25
Fixed factory overhead* 20 10
Marketing costs (all fixed) 10 10
Total costs $230 $120
Operating profit $ 20 $ 20
* Based on labor-hours.
The DVD game craze is at its height so that either Flash or Clash alone can be sold to keep the plant
operating at full capacity. However, labor capacity in the plant is insufficient to meet the combined
demand for both games. Flash and Clash are processed through the same production departments.
seat 700 diners in the average lunch period, and his cooking and wait staff can easily handle the addi-
tional load. The tour operator generally pays for the entire group on a single check to save the wait
staff and cashier the additional time. Due to competitive conditions in the tour business, the operator
is now asking Barry to lower the price to $3.50 per meal for each of the 50 bus tour members.
Required Should Barry accept the $3.50 price? Why or why not? What if the tour company were willing
to guarantee 200 patrons (or four bus loads) at least once a month for $3.00 per meal?
11-38 Special Order Earth Baby Inc. (EBI) recently celebrated its tenth anniversary. The company pro-
duces organic baby products for health-conscious parents. These products include food, clothing,
and toys. Earth Baby has recently introduced a new line of premium organic baby foods. Extensive
research and scientific testing indicate that babies raised on the new line of foods will have substan-
tial health benefits. EBI is able to sell its products at prices higher than competitors’ because of its
excellent reputation for superior products. EBI distributes its products through high-end grocery
stores, pharmacies, and specialty retail baby stores.
Joan Alvarez, the founder and CEO of EBI recently received a proposal from an old business
school classmate, Robert Bradley, the vice president of Great Deal Inc (GDI), a large discount
retailer. Mr. Bradley proposes a joint venture between his company and EBI, citing the growing
demand for organic products and the superior distribution channels of his organization. Under
this venture EBI would make some minor modifications to the manufacturing process of some
of its best-selling baby foods and the foods would then be packaged and sold by GDI. Under the
agreement EBI would receive $3.10 per jar of baby food and would provide GDI a limited right to
advertise the product as manufactured for Great Deal by EBI. Joan Alvarez set up a meeting with
Fred Stanley, Earth Baby’s CFO, to discuss the profitability of the venture. Mr. Stanley made some
initial calculations and determined that the direct materials, direct labor, and other variable costs
needed for the GDI order would be about $2 per unit as compared to the full cost of $3 (materials,
labor, and overhead) for the equivalent EBI product.
Required Should Earth Baby Inc. accept the proposed venture from GDI? Why or why not?
11-39 Special Order; Strategy, International Williams Company, located in southern Wisconsin, manu-
factures a variety of industrial valves and pipe fittings that are sold to customers in nearby states.
Currently, the company is operating at about 70 percent capacity and is earning a satisfactory return
on investment.
Glasgow Industries Ltd. of Scotland has approached management with an offer to buy
120,000 units of a pressure valve. Glasgow Industries manufactures a valve that is almost identi-
cal to Williams’ pressure valve; however, a fire in Glasgow Industries’ valve plant has shut down
its manufacturing operations. Glasgow needs the 120,000 valves over the next four months to meet
commitments to its regular customers; the company is prepared to pay $21 each for the valves.
Williams’ product cost for the pressure valve, based on current attainable standards, is
Direct materials $ 6
Direct labor (0.5 hr per valve) 8
Manufacturing overhead (1/3 variable) 9
Total manufacturing cost $23
Additional costs incurred in connection with sales of the pressure valve are sales commissions of
5 percent and freight expense of $1 per unit. However, the company does not pay sales commissions
on special orders that come directly to management. Freight expense will be paid by Glasgow.
In determining selling prices, Williams adds a 40 percent markup to product cost. This provides
a $32 suggested selling price for the pressure valve. The marketing department, however, has set the
current selling price at $30 to maintain market share.
Production management believes that it can handle the Glasgow Industries order without dis-
rupting its scheduled production. The order would, however, require additional fixed factory over-
head of $12,000 per month in the form of supervision and clerical costs.
If management accepts the order, Williams will manufacture and ship 30,000 pressure valves to
Glasgow Industries each month for the next four months. Shipments will be made in weekly con-
signments, FOB shipping point.
Required
1. Determine how many additional direct labor-hours will be required each month to fill the Glasgow order.
2. Prepare an analysis showing the impact on profit before tax of accepting the Glasgow order.
3. Calculate the minimum unit price that Williams’ management could accept for the Glasgow order with-
out reducing net income.
4. Identify the strategic factors that Williams should consider before accepting the Glasgow order.
5. Identify the factors related to international business that Williams should consider before accepting the
Glasgow order.
(CMA Adapted)
11-40 Opening a New Restaurant; Use of Relevant Cost Analysis Brad and Judy Bailey both enjoy pre-
paring food and creating new recipes. So they are taking their passion to the workplace and plan to
open a new restaurant called Baileys’. They have a two-year, renewable lease on a property that was
previously used as a fast food restaurant. You are a good friend of the couple. They know of your
expertise in cost management, so they have asked for your advice.
Required Give an example (no numbers necessary) of how the Baileys could use the following cost man-
agement methods in planning and operating their new restaurant.
1. Special order analysis.
2. The make-or-buy decision.
3. Sell now or process further.
4. Profitability analysis for current and/or new products.
11-41 Special Order; Use of Opportunity Cost Information Sharman Athletic Gear Inc (SAG) is consid-
ering a special order for 15,000 baseball caps with the logo of East Texas University (ETU) to be
purchased by the ETU alumni association. The ETU alumni association is planning to use the caps
as gifts and to sell some of the caps at alumni events in celebration of the university’s recent national
championship by its baseball team. Sharman’s cost per hat is $3.50 which includes $1.50 fixed cost
related to plant capacity and equipment. ETU has made a firm offer of $35,000 for the hats, and
Sharman, considering the price to be far below production costs, decides to decline the offer.
Required
1. Did Sharman make the wrong decision? Why or why not?
2. Consider the management decision-making approach at Sharman that resulted in this decision. How
was opportunity cost included or not included in the decision? What decision biases are apparent in this
decision?
11-42 When Does Buying a Gas Guzzler Make Sense? Gasoline prices increased and also fluctuated
widely during 2007 and 2008, and car purchases fell, even for fuel-efficient cars. Many new cars
were selling for a discount and/or special promotions including reduced interest rates on car loans.
These discounts and promotions were especially prominent for SUVs and larger cars, those with the
lowest gas mileage. The discounts and promotions were also prominent for used cars; in the used car
market it was hard to find a fuel efficient vehicle, but SUVs and larger cars were in abundance.
Required You are shopping for a car for your youngest son who has just received his driver’s license. By clear
agreement with your son, and because of local legal restrictions on new drivers such as those limiting the time
of day they can drive, you do not expect the car to be driven many miles in the average month. Your son will be
the only one allowed to use the car and he by agreement must purchase the gasoline for it. You will pay for insur-
ance and for any mechanical repairs. Your criteria for the purchase of the car are first safety and then reliability
and the cost of insurance. What type of car would you consider—a small fuel-efficient car or a large car?
Problems 11-43 Special Order Award Plus Co. manufactures medals for winners of athletic events and other
contests. Its manufacturing plant has the capacity to produce 10,000 medals each month; current
monthly production is 7,500 medals. The company normally charges $175 per medal. Variable costs
and fixed costs for the current activity level of 75 percent follow:
Award Plus has just received a special one-time order for 2,500 medals at $100 per medal. For this
particular order, no variable marketing costs will be incurred. Cathy Senna, a management account-
ant with Award Plus, has been assigned the task of analyzing this order and recommending whether
the company should accept or reject it. After examining the costs, Senna suggested to her supervi-
sor, Gerard LePenn who is the controller, that they request competitive bids from vendors for the
raw materials since the current quote seems high. LePenn insisted that the prices are in line with
other vendors and told her that she was not to discuss her observations with anyone else. Senna later
discovered that LePenn is a brother-in-law of the owner of the current raw materials supply vendor.
Required
1. Determine if Award Plus Co. should accept the special order and why.
2. Discuss at least three other considerations that Cathy Senna should include in her analysis of the special
order.
3. Explain how Cathy Senna should try to resolve the ethical conflict arising out of the controller’s insist-
ence that the company avoid competitive bidding.
(CMA Adapted)
11-44 Special Order Duvernoy Industries produces high-quality automobile seat covers. Its success in the
industry is due to its quality, although all of its customers, the automakers, are very cost conscious and
negotiate for price cuts on all large orders. Noting that the auto supply business is becoming increas-
ingly competitive, Duvernoy is looking for a way to meet the challenge. It is negotiating with Chen,
Inc., a large mail-order auto parts and accessories retailer, to purchase a large order of seat covers.
Much of Duvernoy’s business is seasonal and cyclical, fluctuating with the varying demands of the
large automakers. Duvernoy would like to keep its plants busy throughout the year by reducing these
seasonal and cyclical fluctuations. Keeping the flow of product moving through the plants at a steady
level is helpful in keeping costs down; extra overtime and machine setup and repair costs are incurred
when production levels fluctuate. Chen has agreed to a large order but only at a price of $30 per set. The
special order can be produced in one batch with available capacity. Duvernoy prepared these data:
No variable marketing costs are associated with this order, but Marc Jones, the firm’s president, has
spent $6,000 during the past three months trying to get Chen to purchase the special order.
Required
1. How much will the special order change Duvernoy Industries’ total operating income?
2. How might the special order fit into Duvernoy’s competitive situation?
11-45 Special Order: ABC Costing (Continuation of Problem 11-44) Assume the same information as for
Problem 11-44, except that the $40 fixed manufacturing overhead consists of $15 per unit batch
related costs and $25 per unit facilities level fixed costs. Also, assume that each new batch causes
increased costs of $15,000 per batch; the remainder of the fixed costs do not vary with the number
of units produced or the number of batches.
Required
1. Calculate the relevant unit and total cost of the special order, including the new information about batch
related costs.
2. If accepted, how would the special order affect Duvernoy’s operating income?
3. Suppose that Chen notifies Duvernoy it must reduce its order to 1,000 units because of changes in orders
it has received. How would this change affect your answer in Parts 1 and 2?
11-46 Make or Buy Martens, Inc., manufactures a variety of electronic products. It specializes in com-
mercial and residential products with moderate to large electric motors such as pumps and fans.
Martens is now looking closely at its production of attic fans, which included 10,000 units in the
prior year and had the following costs. These costs included $100,000 of allocated fixed manufac-
turing overhead. Martens has capacity to manufacture 15,000 attic fans per year.
Martens believes demand in the coming year will be 20,000 attic fans. The company has looked
into the possibility of purchasing the attic fans from another manufacturer to help it meet this
demand. Harris Products, a steady supplier of quality products, would be able to provide up to 9,000
attic fans per year at a price of $46 per fan delivered to Martens’s facility.
For each unit of product that Martens sells, regardless of whether the product has been purchased
from Harris or is manufactured by Martens, there is an additional selling and administrative cost
of $20, which includes an allocated $6 fixed overhead cost per unit. The following is based on the
production of 10,000 units in the prior year.
Required
1. Assuming Martens plans to meet the expected demand for 20,000 attic fans, how many should it manufac-
ture and how many should it purchase from Harris Products? Explain your reasoning with calculations.
2. Independent of Part 1 above, assume that Beth Johnson, Martens’s product manager, has suggested that
the company could make better use of its fan department capacity by manufacturing marine pumps
instead of fans. Johnson believes that Martens could expect to use the production capacity to produce
and sell 25,000 pumps annually at a price of $60 per pump. Johnson’s estimate of the costs to manufac-
ture the pumps is presented below. If Johnson’s suggestion is not accepted, Martens would sell 20,000
attic fans instead. Should Martens manufacture pumps or attic fans? Information on the sales price and
costs for the marine pumps follows.
3. What are some of the long-term considerations in Martens’s decisions in Parts 1 and 2 above?
11-47 Special Order BallCards Inc. sells baseball cards in packs of 15 in drugstores throughout the
country. It is the third leading firm in the industry. BallCards has been approached by Pennock
Cereal Inc., which would like to order a special edition of cards to use as a promotion with its cereal.
BallCards would be solely responsible for designing and producing the cards. Pennock wants to
order 25,000 sets and has offered $23,750 for the total order. Each set will consist of 33 cards. Ball-
Cards currently produces cards in sheets of 132.
BallCards would incur no marketing costs for the special order. It has the capacity to accept this
order without interrupting regular production.
Required
1. Should Ballcards accept the special order? Support your answer with appropriate computations.
2. What are the important strategic issues in the decision?
11-48 Special Order Green Grow Inc. (GGI) manufactures lawn fertilizer and because of its very high
quality often receives special orders from agricultural research groups. For each type of fertilizer
sold, each bag is carefully filled to have the precise mix of components advertised for that type of
fertilizer. GGI’s operating capacity is 22,000 one-hundred-pound bags per month, and it currently
is selling 20,000 bags manufactured in 20 batches of 1,000 bags each. The firm just received a
request for a special order of 5,000 one-hundred-pound bags of fertilizer for $125,000 from APAC,
a research organization. The production costs would be the same, although delivery and other pack-
aging and distribution services would cause a one-time $2,000 cost for GGI. The special order
would be processed in two batches of 2,500 bags each. The following information is provided about
GGI’s current operations:
Sales and production cost data for 20,000 bags, per bag
Sales price $38
Variable manufacturing costs 15
Variable marketing costs 2
Fixed manufacturing costs 12
Fixed marketing costs 2
No marketing costs would be associated with the special order. Since the order would be used in
research and consistency is critical, APAC requires that GGI fill the entire order of 5,000 bags.
Required
1. Should GGI accept the special order? Explain why or why not.
2. What would be the change in operating income if the special order is accepted?
3. Suppose that after GGI accepts the special order, it finds that unexpected production delays will not
allow it to supply all 5,000 units from its own plants and meet the promised delivery date. It can provide
the same materials by purchasing them in bulk from a competing firm. The materials would then be
packaged in GGI bags to complete the order. GGI knows the competitor’s materials are very good qual-
ity, but it cannot be sure that the quality meets its own exacting standards. There is not enough time to
carefully test the competitor’s product to determine its quality. What should GGI do?
11-49 Special Order; ABC Costing (Continuation of Problem 11-48) Assume the same information as for
Problem 11-48, except that the $12 fixed manufacturing overhead consists of $8 per unit batch
related costs and $4 per unit facilities level fixed costs. Also, assume that each new batch causes
increased costs of $5,000 per batch; the remainder of the batch level costs consists of tools and
supervision labor that do not vary with the number of batches. The remainder of fixed costs do not
vary with the number of units produced or the number of batches.
Required
1. Calculate the relevant unit and total cost of the special order, including the new information about batch
related costs.
2. If accepted, how would the special order affect GGI’s operating income?
11-50 Profitability Analysis, Scarce Resources Santana Company has met all production requirements
for the current month and has an opportunity to produce additional units of product with its excess
capacity. Unit selling prices and costs for three models of one of its product lines are as follows:
Variable overhead is charged to products on the basis of direct labor dollars; fixed overhead is
charged to products on the basis of machine-hours.
Required
1. If Santana Company has excess machine capacity and can add more labor as needed (neither machine
capacity nor labor is a constraint), the excess production capacity should be devoted to producing which
product or products?
2. If Santana Company has excess machine capacity but a limited amount of labor time, the production
capacity should be devoted to producing which product or products?
11-51 Profitability Analysis “I’m not looking forward to breaking the news,” groaned Charlie Wettle, the
controller of Meyer Paint Company. He and Don Smith, state liaison for the firm, were returning
from a meeting with representatives of the Virginia General Services Administration (GSA), the
agency that administers bidding on state contracts. Charlie and Don had expected to get the specifi-
cations to bid on the traffic paint contract, soon to be renewed. Instead of picking up the bid sheets
and renewing old friendships at the GSA, however, they were stunned to learn that Meyer’s paint
samples had performed poorly on the road test and the firm was not eligible to bid on the contract.
Meyer’s two main product lines are traffic paint, used for painting yellow and white lines on high-
ways, and commercial paints, sold through local retail outlets. The paint production process is fairly
simple. Raw materials are kept in the storage area that occupies approximately half of the plant space.
Large tanks that resemble silos are used to store the latex that is the main ingredient in their paint.
These tanks are located on the loading dock just outside the plant so that when a shipment of latex
arrives, it can be pumped directly from the tank truck into these storage tanks. Latex is extremely sensi-
tive to cold. It cannot be stored outside or even shipped in the winter without heated trucks, which are
very expensive for a small firm such as Meyer.
Currently, Meyer has the traffic paint contracts for the states of Pennsylvania, North Carolina,
Delaware, and Virginia. Of last year’s total production of 380,000 gallons, 90 percent was traffic
paint. Of this amount, 88,000 gallons were for the Virginia contract. Each state has unique specifica-
tions for color, thickness, texture, drying time, and other characteristics of the paint. For example,
paint sold to Pennsylvania must withstand heavy use of salt on roads during the winter. Paint for
North Carolina highways must tolerate extended periods of intense heat during summer months.
Due to the high cost of shipping paint, most paint producers can be competitive on price only in
locations fairly close to their production facilities. Accordingly, Meyer has enjoyed an advantage in
bidding on contracts in the eastern states close to Virginia. However, one of their biggest competitors,
Heron Paint Company of Houston, Texas, is building a new plant in North Carolina. With lower costs
due to their efficient new facility and their proximity, Heron will become a major competitive threat.
Meyer’s commercial paint line includes interior and exterior house paints in a wide range of
colors formulated to approximate authentic colonial colors. Because of the historical association,
the line has been well received in Virginia. Most of these paints are sold through paint and hardware
stores as the stores’ second or third line of paint. The large national firms such as Benjamin Moore
or Sherwin Williams provide extensive services to paint retailers such as computerized color match-
ing equipment. Partly because they lack the resources to provide such amenities and partly because
they have always considered the commercial paint a sideline, Meyer has never tried to market the
commercial line aggressively. Meyer sells 38,000 gallons of commercial paint per year.
Charlie is worried about the future of the company. The firm’s strategic goal is to provide a
quality product at the lowest possible cost and in a timely fashion. After absorbing the shock of
losing the Virginia contract, Charlie wondered whether the firm should consider increasing pro-
duction of commercial paints to lessen the company’s dependence on traffic paint contracts. Carl
Bunch, who manages the day-to-day operation of the firm, believes the company can double its
sales of commercial paint if it undertakes a promotional campaign estimated to cost $60,000. The
average price of traffic paint sold last year was $10 per gallon. For commercial paint, the average
price was $12.
Charlie Wettle has assembled the following data to evaluate the financial performance of the two
lines of paint. The primary raw material used in paint production is latex. The list price for latex is
$16 per pound; 450 pounds of latex are needed to produce 1,000 gallons of traffic paint. Commercial
paint requires 325 pounds of latex per 1,000 gallons of paint. In addition to the cost of the latex, other
variable costs are as shown below.
Traffic Commercial
Raw materials cost per gallon of paint:
Camelcarb (limestone) 0.38 0.54
Silica 0.37 0.52
Pigment 0.12 0.38
Other ingredients 0.06 0.03
Direct labor cost per gallon 0.46 0.85
Freight cost per gallon 0.78 0.43
Last year, fixed overhead costs attributable to the traffic paint totaled $85,000, including an esti-
mated $25,000 of costs directly associated with the Virginia contract; the $25,000 can be eliminated
in approximately two years. Fixed overhead costs attributable to the commercial paint are $13,000.
Other manufacturing overhead costs total $110,000. Charlie estimates that $40,000 of this amount
is inventory handling costs that will be avoided due to the loss of the Virginia contract. Both the
remaining manufacturing overhead and the general and administrative costs of $140,000 are allo-
cated equally to all gallons of paint produced.
Required
1. Calculate the contribution margin for each type of paint and total firmwide contribution under each of
the following scenarios:
Scenario A Current production, including the Virginia contract
Scenario B Without either the Virginia contract or the promotion to expand sales of commercial paint
Scenario C Without the Virginia contract but with the promotion to expand sales of the commercial
paint
2. Determine whether scenario B or C (per Part 1 above) should be chosen by Meyer and explain why,
including a consideration of the strategic context.
11-52 Special Order New Life, Inc., manufactures skin creams, soaps, and other products primarily for
people with dry and sensitive skin. It has just introduced a new line of product that removes the spot-
ting and wrinkling in skin associated with aging. It sells these products in pharmacies and depart-
ment stores at prices somewhat higher than those of other brands because of New Life’s excellent
reputation for quality and effectiveness.
New Life currently has very low utilization of plant capacity. Two years ago, in anticipation of
rapid growth, the company opened a large new manufacturing plant, which has yet to be utilized
more than 50 percent. Partly for this reason, New Life has sought new partners and was able, with
the help of financial analysts, to locate suitable business partners. The first potential partner identi-
fied in this search was a large supermarket chain, SuperValue, which is interested in the partnership
because it wants New Life to manufacture an age cream to sell in its stores. The product would
be essentially the same as the New Life product but packaged with the SuperValue brand name.
The agreement would pay New Life $2.00 per unit and would allow SuperValue a limited right
to advertise the product as manufactured for SuperValue by New Life. New Life’s CFO has made
some calculations and has determined that the direct materials, direct labor, and other variable costs
needed for the SuperValue order would be about $1.00 per unit as compared to the full cost of $2.50
(materials, labor, and overhead) for the equivalent New Life product.
Required Should New Life accept the proposal from SuperValue? Why or why not?
11-53 Project-Analysis, Sales Promotions Hillside Furniture Company makes outdoor furniture from
recycled products, including plastics and wood by-products. Its three furniture products are gliders,
chairs with footstools, and tables. The products appeal primarily to cost-conscious consumers and
those who value the recycling of materials. The company wholesales its products to retailers and
various mass merchandisers. Because of the seasonal nature of the products, most orders are manu-
factured during the winter months for delivery in the early spring. Michael Cain, founder and owner,
is dismayed that sales for two of the products are tracking below budget. The following chart shows
pertinent year-to-date data regarding the company’s products.
Certain that the shortfall was caused by a lack of effort by the sales force, Michael has suggested
to Lisa Boyle, the sales manager, that the company announce two contests to correct this situation
before it deteriorates. The first contest is a trip to Hawaii awarded to the top salesperson if incre-
mental glider sales are attained to close the budget shortfall. The second contest is a golf weekend,
complete with a new set of golf clubs, awarded to the top salesperson if incremental sales of chairs
with footstools are attained to close the budget shortfall. The Hawaiian vacation would cost $16,500
and the golf trip would cost $12,500.
Required
1. Explain whether either contest is desirable or not.
2. Explain the strategic issues guiding your choice about these contests.
(CMA Adapted)
11-54 Make or Buy GianAuto Corporation manufactures parts and components for manufacturers and
suppliers of parts for automobiles, vans, and trucks. Sales have increased each year based in part
on the company’s excellent record of customer service and reliability. The industry as a whole
has also grown as auto manufacturers continue to outsource more of their production, especially
to cost-efficient manufacturers such as GianAuto. To take advantage of lower wage rates and
favorable business environments around the world, Gian has located its plants in six different
countries.
Among the various GianAuto plants is the Denver Cover Plant, one of Gian Auto’s earliest plants.
The Denver Cover Plant prepares and sews coverings made primarily of leather and upholstery fab-
ric and ships them to other GianAuto plants where they are used to cover seats, headboards, door
panels, and other GianAuto products.
Ted Vosilo is the plant manager for the Denver Cover Plant, which was the first GianAuto plant
in the region. As other area plants were opened, Ted was given the responsibility for managing them
in recognition of his management ability. He functions as a regional manager although the budget
for him and his staff is charged to the Denver Cover Plant.
Ted has just received a report indicating that GianAuto could purchase the entire annual output
of Denver Cover from suppliers in other countries for $60 million. He was astonished at the low out-
side price because the budget for Denver Cover Plant’s operating costs for the coming year was set
at $82 million. He believes that GianAuto will have to close operations at Denver Cover to realize
the $22 million in annual cost savings.
Denver Cover’s budget for operating costs for the coming year follows:
Materials $ 32,000
Labor
Direct $ 23,000
Supervision 3,000
Indirect plant 4,000 30,000
Overhead
Depreciation—equipment $ 5,000
Depreciation—building 3,000
Pension expense 4,000
Plant manager and staff 2,000
Corporate allocation 6,000 20,000
Total budgeted costs $ 82,000
• Some employees would probably elect early retirement because GianAuto has an excellent plan.
In fact, $3 million of the 2010 pension expense would continue whether Denver Cover is open
or not.
• Ted and his staff would not be affected by closing Denver Cover. They would still be responsible
for managing three other area plants.
• Denver Cover considers equipment depreciation to be a variable cost and uses the units-of-
production method to depreciate its equipment and the customary straight-line method to depre-
ciate its building.
Required
1. Explain GianAuto’s competitive strategy and how this strategy should be considered with regard
to the Denver Plant decision. Identify the key strategic factors that should be considered in the
decision.
2. GianAuto Corporation plans to prepare a strategic analysis to use in deciding whether to close the
Denver Cover Plant. In your analysis, use the above information, and include consideration of global
competition and GianAuto’s competitive strategy.
(CMA Adapted)
11-55 Make or Buy Bernard’s Specialty Manufacturing (BSM) produces custom vehicles—limousines,
buses, conversion vans, and small trucks—for special order customers. It customizes each vehicle
to the customer’s specifications. BSM has been growing at a steady rate in recent years in part
because of the increased demand for specialty luxury vehicles. The increased demand has also
caused new competitors to enter the market for these types of vehicles. BSM management con-
siders its competitive advantage to be the high quality of its manufacturing. Much of the work is
handmade, and the company uses only the best parts and materials. Many parts are made in-house
to control for highest quality. Because of the increased competition, price competition is begin-
ning to become a factor for the industry, and BSM is becoming more concerned about cost con-
trols and cost reduction. It has controlled them by purchasing materials and parts in bulk, paying
careful attention to efficiency in scheduling and working different jobs, and improving employee
productivity.
The increased competition has also caused BSM to reconsider its strategy. Upon review with the
help of a consultant, BSM management has decided that it competes most effectively as a differ-
entiator based on quality of product and service. To reinforce the differentiation strategy, BSM has
implemented a variety of quality inspection and reporting systems. Quality reports are viewed at all
levels of management, including top management.
To decrease costs and improve quality, BSM has begun to look for new outside suppliers for cer-
tain parts. For example, BSM can purchase a critical suspension part, now manufactured in-house,
from Performance Equipment Inc. for a price of $105. Buying the part would save BSM 10 percent
of the labor and variable overhead costs and $68 of materials costs. The current manufacturing costs
for the suspension assembly are as follows:
Materials $192
Labor 75
Variable overhead 150
Fixed overhead 150
Total cost for suspension assembly $567
Required
1. How would total costs be affected if BSM chose to purchase the part rather than to continue to manufac-
ture it?
2. Should BSM purchase or manufacture the part? Include strategic considerations in your answer.
11-56 Make or Buy, Review of Learning Curves Henderson Equipment Company has produced a pilot
run of 50 units of a recently developed cylinder used in its finished products. The cylinder has
a one-year life, and the company expects to produce and sell 1,650 units annually. The pilot run
required 14.25 direct labor-hours for the 50 cylinders, averaging 0.285 direct labor-hours per cyl-
inder. Henderson has experienced an 80 percent learning curve on the direct labor-hours needed to
produce new cylinders. Past experience indicates that learning tends to cease by the time 800 parts
are produced.
Henderson has received a quote of $7.50 per unit from Lytel Machine Company for the addi-
tional 1,600 cylinders needed. Henderson frequently subcontracts this type of work and has always
been satisfied with the quality of the units produced by Lytel.
Required
1. If Henderson manufactures the cylinders, determine
a. The average direct labor-hours per unit for the first 800 cylinders (including the pilot run) produced.
Round calculations to three decimal places.
b. The total direct labor-hours for the first 800 cylinders (including the pilot run) produced.
2. After completing the pilot run, Henderson must manufacture an additional 1,600 units to fulfill the
annual requirement of 1,650 units. Without regard to your answer in requirement 1, assume that
• The first 800 cylinders produced (including the pilot run) required 100 direct labor-hours.
• The 800th unit produced (including the pilot run) required 0.079 hour.
Calculate the total manufacturing costs for Henderson to produce the additional 1,600 cylinders
required.
3. Determine whether Henderson should manufacture the additional 1,600 cylinders or purchase them
from Lytel. Support your answer with appropriate calculations.
(CMA Adapted)
11-57 Profitability Analysis; Review of Master Budget RayLok Incorporated has invented a secret proc-
ess to improve light intensity and manufactures a variety of products related to this process. Each
product is independent of the others and is treated as a separate profit/loss division. Product (divi-
sion) managers have a great deal of freedom to manage their divisions as they think best. Failure to
produce target division income is dealt with severely; however, rewards for exceeding one’s profit
objective are, as one division manager described them, lavish.
The DimLok Division sells an add-on automotive accessory that automatically dims a vehicle’s
headlights by sensing a certain intensity of light coming from a specific direction. DimLok has had a
new manager in each of the three previous years because each manager failed to reach RayLok’s target
profit. Donna Barnes has just been promoted to manager and is studying ways to meet the current
target profit for DimLok.
DimLok’s two profit targets for the coming year are $800,000 (20 percent return on the invest-
ment in the annual fixed costs of the division) plus an additional profit of $20 for each DimLok unit
sold. Other constraints on division operations are
• Production cannot exceed sales because RayLok’s corporate advertising program stresses com-
pletely new product models each year, although the models might have only cosmetic changes.
• DimLok’s selling price cannot vary above the current selling price of $200 per unit but may vary
as much as 10 percent below $200.
• A division manager can elect to expand fixed production or selling facilities; however, the target
objective related to fixed costs is increased by 20 percent of the cost of such expansion. Further-
more, a manager cannot expand fixed facilities by more than 30 percent of existing fixed cost
levels without approval from the board of directors.
Donna is now examining data gathered by her staff to determine whether DimLok can
achieve its target profits of $800,000 and $20 per unit. A summary of these reports shows the
following:
• Last year’s sales were 30,000 units at $200 per unit.
• DimLok’s current manufacturing facility capacity is 40,000 units per year but can be increased to
80,000 units per year with an increase of $1,000,000 in annual fixed costs.
• Present variable costs amount to $80 per unit, but DimLok’s vendors are willing to offer raw
materials discounts amounting to $20 per unit, beginning with unit number 60,001.
• Sales can be increased up to 100,000 units per year by committing large blocks of product to
institutional buyers at a discounted unit price of $180. However, this discount applies only to
sales in excess of 40,000 units per year.
Donna believes that these projections are reliable and is now trying to determine what DimLok
must do to meet the profit objectives that RayLok’s board of directors assigned to it.
Required
1. Determine the dollar amount of DimLok’s present annual fixed costs.
2. Determine the number of units that DimLok must sell to achieve both profit objectives. Be sure to con-
sider all constraints in determining your answer.
3. Without regard to your answer in Part 2, assume that Donna decides to sell 40,000 units at $200 per
unit and 24,000 units at $180 per unit. Prepare a master budget income statement for DimLok showing
whether her decision will achieve DimLok’s profit objectives.
4. Assess DimLok’s competitive strategy.
5. Identify the strategic factors that DimLok should consider.
(CMA Adapted)
11-58 Profitability Analysis; Pricing HomeSuites Inn is a national chain of high-quality hotels, which
is popular with business travelers. Many of HomeSuites’ best customers will stay for a week or
longer during their business trip. Top management of the hotel chain made a strategic move in the
prior year to raise profitability by raising room rates an average of 10 percent, from an average of
$80 to $88. HomeSuites’ main competitors (the total market for hotels that compete with Home-
Suites is about 50,000,000 daily room occupancy per year) responded by keeping their rates low,
and as a result, HomeSuites’ sales fell from 5,000,000 annual room occupancy to 4,000,000 rooms,
a 20 percent fall in room sales, and a new low in occupancy rate for the firm. The fall in room sales
was greater than expected, so HomeSuites consulted a marketing expert who explained that custom-
ers in this market are very sensitive to price changes, and furthermore, that while a reduction in
price increases volume and an increase in price reduces volume, the effect is not proportional; price
decreases improve sales at a faster rate than price increases reduce sales. HomeSuites is now consid-
ering a reduction in price to $76, with the expectation of increasing sales by as much as 50 percent
over the current level of 4,000,000 rooms. The consultant assures HomeSuites that if it returned to
the $80 price, sales would return to the 5,000,000 level. The table below shows the room costs per
occupied rooms at various annual occupancy levels.
Required What do you think is the best strategy for HomeSuites regarding room pricing? Develop a
spreadsheet analysis that shows what would be the effect on contribution of the different pricing policies
HomeSuites has used or is considering.
11-59 Make or Buy The Midwest Division of the Paibec Corporation manufactures subassemblies used
in Paibec’s final products. Lynn Hardt of Midwest’s profit planning department has been assigned
the task of determining whether Midwest should continue to manufacture a subassembly compo-
nent, MTR-2000, or purchase it from Marley Company, an outside supplier. Marley has submitted
a bid to manufacture and supply the 32,000 units of MTR-2000 that Paibec will need for 2010 at a
unit price of $17.30. Marley has assured Paibec that the units will be delivered according to Paibec’s
production specifications and needs. The contract price of $17.30 is applicable only in 2010, but
Marley is interested in entering into a long-term arrangement beyond 2010.
Lynn has submitted the following information regarding Midwest’s cost to manufacture 30,000
units of MTR-2000 in 2009.
(CMA Adapted)
11-60 Profitability Analysis High Point Furniture Company (HPF) manufactures very high-quality fur-
niture for sale directly to exclusive hotels, interior designers, and select retail outlets throughout the
world. HPF’s products include upholstered furniture, dining tables, bedroom furniture, and a variety
of other products, including end tables. Through attention to quality and design innovation, and by
careful attention to changing consumer tastes, HPF has become one of the most successful furni-
ture manufacturers worldwide. Hal Blin, the chief operating officer of HPF, is reviewing the most
recent sales and profits report for the three best-selling end tables in HPFs product line—the Parker,
Virginian, and Weldon end tables. Hal is concerned about the relatively poor performance of the
Weldon line. He discusses the prospects for the line with HPF’s marketing and sales vice-president,
Joan Hunt. Joan notes that there has been no significant trend up or down in any of the end table
lines, though the direction of consumer tastes would probably favor the Virginian and Parker lines.
Hal and Joan agree that this may be the time for further analysis to determine whether the Weldon
line should be discontinued.
Required
1. Using Excel or an equivalent spreadsheet, develop an analysis that can help Hal decide about the future
of the Weldon line. Should the Weldon line be dropped? Why or why not?
2. Using the spreadsheet you developed in Part 1, determine whether your answer would change if sales of
Weldon are expected to fall by 80 percent.
3. Again using the spreadsheet in Part 1, determine whether the Weldon line should be discontinued if
the resources devoted to Weldon could be used to increase sales by 10 percent in each of the other two
lines.
4. Again using the spreadsheet in Part 1 and using Goal Seek in Excel or an equivalent, determine the sales
increase (or decrease) in the sales of the Parker line that would be necessary if the Weldon line were
discontinued to maintain the firm’s overall profit in Part 1. For an illustration of Goal Seek, seek Exhibit
9.5 in Chapter 9.
5. Given your answers to Parts 1 through 4 above, consider the overall competitive environment fac-
ing HPF and make your recommendations regarding the firm’s strategic position and direction at this
time.
11-61 Profitability Analysis; Linear Programming (Appendix) Home Service Company offers monthly
service plans to provide prepared meals that are delivered to customers’ homes and need only be
heated in a microwave or conventional oven. Home Service offers two monthly plans, premier cui-
sine and haute cuisine. The premier cuisine plan provides frozen meals that are delivered twice each
month; the premier generates a contribution of $150 for each monthly service plan sold. The haute
cuisine plan provides freshly prepared meals delivered on a daily basis and generates a contribution
of $100 for each monthly plan sold. Home Service’s strong reputation enables it to sell all meals that
it can prepare.
Each meal goes through food preparation and cooking steps in the company’s kitchens. After
these steps, the premier cuisine meals are flash frozen. The time requirements per monthly meal
plan and hours available per month follow:
For planning purposes, Home Service uses linear programming to determine the most profitable
number of premier and haute cuisine meals to produce.
Required
1. Using the Solver function of Microsoft Excel, determine the most profitable product mix for Home
Service given the existing constraints and contribution margins.
2. Using the Solver function of Microsoft Excel, determine the most profitable product mix for Home Serv-
ice given the existing contribution margins and all constraints except the preparation time constraint.
(CMA Adapted)
11-62 Bid Pricing; Review of CVP Analysis Deaton Fibers Inc. specializes in the manufacture of syn-
thetic fibers that the company uses in many products such as blankets, coats, and uniforms for
police and firefighters. Deaton has been in business since 1975 and has been profitable each year
since 1983.
Deaton recently received a request to bid on the manufacture of 800,000 blankets scheduled for
delivery to several military bases. The bid must be stated at full cost per unit plus a return on full
cost of no more than 12 percent after income taxes. Full cost has been defined as all variable costs
of manufacturing the product, a reasonable amount of fixed overhead, and a reasonable incremental
administrative cost associated with the manufacture and sale of the product. The contractor has indi-
cated that bids in excess of $30 per blanket are not likely to be considered.
To prepare the bid for the 800,000 blankets, John Taylor, cost management analyst, has gathered
the following information concerning the costs associated with the production of the blankets. The
fixed overhead costs represent an allocation of the cost of currently used facilities. No new fixed
costs are needed for the order.
Required
1. What is the breakeven price per blanket using Deaton’s full cost system?
2. Calculate the minimum price per blanket that Deaton could bid without reducing the company’s net
income.
3. Using the full cost criteria and the maximum allowable return specified, calculate the bid price per blan-
ket for Deaton Fibers.
4. Without prejudice to your answer to requirement 3, assume that the price per blanket that Deaton calcu-
lated using the cost-plus criteria specified is higher than the maximum allowed bid of $30 per blanket.
Discuss the strategic factors that the company should consider before deciding whether to submit a bid
at the maximum acceptable price of $30 per blanket.
(CMA Adapted)
11-63 Outsourcing Call Centers Merchants’ Bank (MB) is a large regional bank operating in 634 loca-
tions in the Southeast U.S. MB has grown steadily over the last 20 years, because of the region’s
growth and the bank’s prudent and conservative business practices. The bank has been able to acquire
less successful competitors in recent years, further enhancing its growth. Until 2005, the bank oper-
ated a call center for customer inquiries out of a single location in Atlanta, GA. MB understood the
importance of the call center for overall customer satisfaction and made sure that the center was
managed effectively. However, in early 2004, it became clear that the cost of running the center was
increasing very rapidly, along with the firm’s growth, and that some issues were arising about the
quality of the service. To improve the quality and dramatically reduce the cost of the service, MB
moved its call center to Bangalore, India, where it is now run by an experienced outsourcing firm,
Naftel, which offers similar services to other banks like MB.
The Naftel contract was for five years, and now in late 2008 it is time to consider whether to
renew the contract, change to another call center service provider (in India or elsewhere), or bring
the call center back to Atlanta.
Some important factors to consider in the decision:
• The value of the dollar has been increasing relative to most other currencies at the time of the
decision in late 2008.
• The financial crisis of 2008 continues to affect the banking business, and the outlook for growth
for MB is not as rosy as it has been for the last few years. Top management and economic advi-
sors for the bank have basically no idea what is the right forecast for the coming five years.
• The employment rate in Atlanta has fallen in the last several months and there is a good supply
of talented employees who might be recruited into the call center if it were relocated back to
Atlanta.
• The bank has just completed a new headquarters building in Atlanta and has a good bit of space
in the building that MB has yet to lease. The outlook for the Atlanta economy is such that MB
does not expect to lease much of this space for at least the next three years. If the call center were
returned to Atlanta, it would occupy a space that would be rented for $100,000 per month, if
there were a company that wanted to lease the space.
• If renewed, the Naftel contract would cost $4,200,000 per year for the next five years.
• The cost of salaries to staff the call center in Atlanta are expected to be $2,300,000 per year, the
equipment would be leased for $850,000 per year, telecommunication services are expected to
cost $500,000 per year, administrative costs for the call center are expected to be $600,000 per
year, and the call center’s share of corporate overhead is expected to be $400,000 per year.
Required
1. Should MB return the call center to Atlanta or renew the contract with Naftel? Develop your answer for
both a one-year and a five-year time horizon. Consider the strategic context of the decision as an integral
part of your answer. (Hint: using discounted cash flow is not required but would improve your answer;
MB uses a discount rate of 6%.)
2. What are the global issues that should be considered in the decision?
3. What ethical issues, if any, should be considered in the decision?
11-64 Opportunity Cost; Lost Sales Wood Flooring Inc. (WFI) is an industry leader in wood flooring
installed in new homes and sold in home improvement stores such as Wal-Mart and Lowes. The
company has recently suffered a significant loss in sales because one of its suppliers, Lucas Prod-
ucts Inc, due to its own production problems was unable (though contractually required) to provide
in a timely manner the coating that WFI uses in the manufacture of its product. WFI makes its
product to order so that each customer chooses the particular stain, coating, and other features of the
product before it is manufactured by WFI. There is no production for inventory. All orders require
a deposit from the customer and the remainder is paid upon delivery; sometimes the deposit is held
by the vendor, and in other cases it is forwarded to WFI. Thus, the failure to receive the coating from
Lucas meant that WFI lost a number of sales orders and had to return some deposits.
In retrospect, WFI understands the mistake of relying on a single source of supply for a critical
element of their manufacturing process and has now developed a set of suppliers, each of which
can be relied upon to provide the needed coating. WFI has estimated lost sales of $ 3.5 million as a
result of the failure of Lucas Products, a portion of which ($2.9 million) is due to orders canceled
by customers because of the delay in receiving their orders. The remaining orders were canceled by
WFI in order to give these customers an opportunity to buy the product from another company, and
thereby to maintain some degree of goodwill with these customers. In all, WFI lost about one-third
of a month’s sales.
WFI is now pursuing legal action against Lucas to recover at least a portion of the lost profits on
these sales. Jeff Jones, the management accountant, has been asked to determine the amount of the
lost profit which the court would consider recoverable.
The relevant facts, that Jeff has obtained are:
• The company spent $18,000 for additional, temporary administrative support personnel to han-
dle the cancellation of the orders and return of deposits.
• WFI approximates its distribution costs at 12 percent of sales price; these costs include the cost
of delivery to the customer, an allowance for returned items, and fees paid to vendors, such
as Wal-Mart. The estimate of 12 percent is based on average results for the prior three years
for WFI.
• WFI approximates its total variable manufacturing costs at 45 percent of sales; fixed manufac-
turing costs are allocated to the product based on labor hours and are approximately 25 percent
of sales, based on averages of application rates used over the prior three years.
• WFI did receive and paid for $30,000 of coating that was used to complete some customers
orders, but the orders were not ready for shipment when the customer canceled the order. The
company sold these completed orders to building contractors at a salvage price that Jones says is
approximately equal to manufacturing cost. There was also $45,000 of coating from Lucas that
was received and paid for by WFI but has not been used.
Required Develop the estimate of recoverable opportunity cost and other costs that Jeff Jones should
present to top management and WFI’s attorneys. In providing the estimate, be sure to include a discussion
of which portions of the estimate are more subjective and therefore more easily denied by the defendant
were the matter to go to trial.
3. Profitability Analysis
1. To determine the number of Windys that can be manufactured if the 3,750 units of Gale are no longer
produced, we consider the capacity released for each of the two constraints.
For the automated sewing machine: The machine produces 20 Windys per hour or 30 Gales per
hour, so that the number of Windys that could be produced from the released capacity of Gale is
For the inspection and packing operation: The operation requires 15 minutes for Windy (4 per
hour) and 5 minutes for Gale (12 per hour), so the number of Windys that could be inspected and packed
in the released time is
In this case, the inspection and packing is the effective limitation, so that if Gale is deleted, the firm can
produce 1,250 Windys with the released capacity.
2. If 3,750 units of Gale are replaced with 1,250 units of Windy, the proper relevant cost analysis should
consider the contribution margin of each product:
Windy Gale
Unit contribution margin $ 8 $ 4
Units sold (giving up 3,750 units Gale
gives 1,250 of Windy, per part 1) 1,250 3,750
Total contribution margin $10,000 $15,000
Thus, the deletion of Gale and replacement with Windy would reduce the total contribution margin by
$5,000 ($15,000 $10,000).
3. Since the effect on total contribution is significant (as shown in Part 2), Windbreakers should continue
to make Gale. Other factors to consider follow:
a. At existing sales levels of 18,750 of Windy and 3,750 of Gale, Windbreakers is operating at full
capacity; if there are additional sales opportunities for Windy, the firm should consider adding to
available capacity so that the current sales of Gale can be made plus the additional sales of Windy.
The analysis of the cost benefit of additional capacity is best addressed through the techniques of
capital budgeting as described in Chapter 12.
b. The effect of the loss of Gale on the firm’s image and therefore the potential long-term effects on the
sales of Windy.
c. The long-term sales potential for Gale. Will its sales likely exceed the current 3,750 level in future
years?