Hypercool: Air & Water-Cooled Aftercoolers
Hypercool: Air & Water-Cooled Aftercoolers
Hypercool: Air & Water-Cooled Aftercoolers
BENEFITS
heavy duty
construction
withstands the rigors
of industry extensive
range of Hiross
condensate drains
WATER-COOLED Models up to 200 m3/min. (higher air flows
on request) are offered in the following
RANGE configurations:
• WFN / WRN (steel shell, copper
tubes): for standard applications.
• WFC / WRC (completely in cupronickel):
for sea water.
• WFS / WRS (steel shell, stainless steel
tubes): for aggressive air.
• WFA / WRA (completely in stainless steel):
for aggressive air and/or water.
ribbed tubing
counterflanges kit
pneumatic version
water-cooled models
Hot compressed air passes through the Aftercooler tubes. Cooling water passes around
the tubes in counterflow, the internal baffles forcing it to make several passes for
increased efficiency. The air is cooled to a temperature which can be as little as 5°C
above the cooling water inlet temperature. As the compressed air cools, so liquid
condensate is created; this is efficiently removed by a centrifugal separator installed
at the Aftercooler outlet.
air-cooled models
Hot compressed air passes through the Aftercooler tubes. Ambient cooling air is forced
across these tubes by the fan, with fins on the tubes increasing the cooling efficiency.
The air is cooled to a temperature which can be as little as 5°C above the ambient
temperature. As the compressed air cools, so liquid condensate is created; this is
efficiently removed by a centrifugal separator installed at the Aftercooler outlet.
SELECT YOUR TAILOR MADE AFTERCOOLER
ANS000 0,6 21 3/4" 16 360 794 216 457 522 476 7,5 ANT 018-036
ANS001 1,2 42 3/4" 16 430 895 277 545 522 476 11 D
C A
ANS/T003 2,5 88 1 1/2" 16 550 1140 403 715 657 567 22
ANS/T004 3,5 124 1 1/2" 16 550 1140 403 715 657 567 28
B
ANT006 6 212 1 1/2" 16 610 1336 453 775 753 663 30 E F
ANT009 9 318 2" 16 702 1361 445 908 751 694 41
ANT014 14 494 2" 16 890 1523 500 1075 815 756 75
ANT 040-075
ANT018 18 636 DN 80 12 1114 1857 560 1516 892 892 85 D
ANT028 28 989 DN 100 12 1418 1807 560 1820 892 892 134 C A
ANT036 36 1271 DN 100 12 1518 2075 580 1980 960 960 190
*
ANT040 40 1412 DN 150 9 1424 1983 1013 1980 1780 1080 323 B E E
ANT048 48 1695 DN 150 9 2550 1983 1013 3102 1730 1130 478 F
ANT064 64 2260 DN 200 9 2550 1983 1040 3122 1730 1130 494
ANT075 75 2649 DN 200 9 2550 1983 1040 3122 1730 1130 514
* For 040: Air inlet is on opposite side to air outlet.
For 048-075: Air inlet and outlet are both on the
Separator side.
Performances refer to models with standard materials operating with clean Cooler conditions with air at FAD 20°C/1 bar A, and at the following working conditions:
air suction 25°C/60%RH, 7 bar g working pressure, 120°C compressed air inlet temperature, temperature approach between air outlet and water (water-cooled
models) or cooling air (air-cooled models) inlet of ca. 10°C. Performance for models with non-standard materials may differ from those above. Power supply for air-
cooled models: ANS are single-phase, ANT are 3-phase. For models with matching separator, air outlet may differ from above.
The Quality and Environment Management Systems of domnick hunter hiross S.p.A.
have been approved by Lloyd's Register Quality Assurance to the following Quality
and Environment Management System standards: ISO9001:2000 (Certificate
LRC160001) and ISO14001:1996 (Certificate LRC160001/14).
Data contained in this publication is to be considered as indicative only.
The manufacturer reserves the right to modify data without prior notice.
The Hiross product range: Aftercoolers, Separators, Filters, Refrigeration Dryers, Adsorption
Dryers, Condensate Drains, Oil/Water Separators, Water Chillers, Dry Coolers.
domnick hunter hiross S.p.A. - S.Angelo di Piove- Padova - Italy - Tel. +39-0499712201 - Fax +39-0499712236 - www.dh-hiross.com