General Catalog 2016

WOM proudly celebrates 35 years of providing the oil & gas industry with meticulously
designed, well-engineered pressure and flow control equipment. WOM looks forward
to continuing to make a positive impact on the process of safely extracting one of the
world’s most precious resources. We are honored to work with the businesses that have
trusted our commitment to excellence and appreciate each member of our group that
has contributed to our success.
Table of Contents
Introduction..................................................................................................................................................................................... 4
Worldwide Service Support............................................................................................................................................................ 5
Vision and Mission....................................................................................................................................................................... 6-7
HSE and Quality .......................................................................................................................................................................... 8-9
Magnum Gate Valve...................................................................................................................................................................... 10
Advantages of the Magnum Design....................................................................................................................................... 11
Gate Valve Standard Trim Chart.................................................................................................................................................... 12
Research and Development............................................................................................................................................................ 14
Model 200M Gate Valve................................................................................................................................................................ 15
Model WV 200 Gate Valve............................................................................................................................................................ 15
WOM Subsea................................................................................................................................................................................. 16
WOM Asia Pacific......................................................................................................................................................................... 17
Subsea Gate Valve....................................................................................................................................................................... 18-19
Actuator....................................................................................................................................................................................... 20-21
Fail Safe Pneumatic and Hydraulic Actuator......................................................................................................................... 20
Magnum Subsea Actuator...................................................................................................................................................... 21
Slurry Service Gate Valve.............................................................................................................................................................. 22
Model 600 Mud Valve................................................................................................................................................................... 22
Line Pressure Operated SSV.......................................................................................................................................................... 23
Dual-Seal Ball Valve...................................................................................................................................................................... 24
Dual-Seal Ball Valve Trim Chart................................................................................................................................................... 26
Diverter System Valves.................................................................................................................................................................. 27
Wellhead and Christmas Tree Systems.......................................................................................................................................... 28
Wellhead Products............................................................................................................................................................... 29-31
Single Piece Wellhead System....................................................................................................................................................... 32
Multi-Completion Wellhead System.............................................................................................................................................. 33
Manifold Systems.......................................................................................................................................................................... 34
Choke Manifolds.................................................................................................................................................................... 34
Cement Manifolds.................................................................................................................................................................. 35
Standpipe Manifolds ............................................................................................................................................................. 35
Blow Out Preventers...................................................................................................................................................................... 36
Ram Type WU BOP............................................................................................................................................................... 37
WGK Annular BOP............................................................................................................................................................... 38
Subsea Intervention System........................................................................................................................................................... 40
Subsea Intervention Deployment Summary Chart........................................................................................................................ 42
Subsea Intervention Package......................................................................................................................................................... 44
Subsea Trees.................................................................................................................................................................................. 46
Subsea Manifolds........................................................................................................................................................................... 47
Subsea Connection System............................................................................................................................................................ 48
Well Containment System ............................................................................................................................................................. 48
Slimbore Drilling Package............................................................................................................................................................. 49
Subsea Shut off Device.................................................................................................................................................................. 49
Pump Saver.................................................................................................................................................................................... 50
Check Valves.................................................................................................................................................................................. 50
Chokes........................................................................................................................................................................................... 51
Controls and Instrumentation...................................................................................................................................................... 52-53
MTC-Well Test Equipment............................................................................................................................................................ 52
Well Test Valves ........................................................................................................................................................................... 54
Flowheads...................................................................................................................................................................................... 55
Custom Design and Manufacture................................................................................................................................................... 56
Global Service and Support........................................................................................................................................................... 57
Repair and Retrofit................................................................................................................................................................. 57
Magnum Forge and Machine Works.............................................................................................................................................. 58
Conversion Chart ........................................................................................................................................................................... 59
Worldwide Location and Service Center....................................................................................................................................... 60
Terms and Conditions.................................................................................................................................................................... 63
Introduction
Worldwide Oilfield Machine, Inc. (WOM) is a multinational manufacturer of pressure and flow control
equipment with worldwide headquarters in Houston, Texas, and manufacturing, sales and service facilities
strategically located throughout the world. Since the company’s founding, WOM has applied innovative
concepts and engineering excellence to consistently improve reliability and reduce maintenance of process
pressure and flow control equipment. In 1985, WOM introduced the breakthrough Magnum Dual-Seal design
for high pressure gate valves used in the oil and gas industry. After thorough and rigorous testing at WOM
and independent test facilities, the Magnum Gate Valve design proved its superiority and became the
gold standard in the industry for high-reliability, low maintenance valve technology. WOM continues to
expand its product portfolio, manufacturing capabilities and customer service/support centers to offer customers
a single source for world-class pressure and flow control package solutions.
An aggressive product development program has lead to oil and gas, petrochemical and power companies
worldwide depending on WOM equipment to support their operations while protecting their employees and the
environment. All WOM products meet ISO and API performance and are engineered to surpass quality
requirements. Complete vertical integration, combined with a well-managed supply chain, ensures that customers
receive orders according to their schedule.
Houston, Usa ▪ Aberdeen, Uk ▪ Pune, India ▪ Dubai, Uae ▪ Singapore
4
Worldwide Service and Support
Satisfying customer needs is top priority at WOM. Whether there is a technical/operational question, custom
design requirement or call to service equipment in the field, WOM Engineering and Service Centers are strategically
located worldwide to support your operations. With one of the largest inventories of replacement parts available,
spares can be rapidly shipped to where they may be needed. Factory-trained technicians, deployed from WOM
Service Centers, also perform comprehensive site assessments, reconditioning and upgrading of existing
equipment. Recognizing the mission-critical nature of our customers’ operations, world-class WOM service
facilities and highly trained, experienced service technicians are available 24/7 to support WOM equipment
and systems in the field. The WOM comprehensive service program reduces the risk of downtime while
increasing safety.
SERVING THE OIL AND GAS INDUSTRY FOR OVER YEARS!
Ashgabat, Turkmenistan ▪ Jakarta, Indonesia ▪ seoul, south Korea
This catalog is an overview of the WOM product line, while more details on each product and product family highlighted herein are available within
individual product descriptions. Please visit the WOM at www.womusa.com to download a file copy of any product or system
Your local WOM representative is also available to assist in selecting the right piece of equipment to meet the reliability and operating requirements
of the application, and ensure the success of your project.
5
VISION
To make a difference in the communities in which the WOM group of companies operates by
providing a world-class organization that develops a way of existence and sets the pinnacle of
standards in all walks of life, whether at work or in society, to ensure future generations healthy,
stable, and fruitful lives.
6
MISSION
To service the oil & gas industry by providing relentless reliability in
our products and fulfilling our customer’s “wish lists” by continuously
designing and developing innovative features that will reduce the end
users’ maintenance and increase overall safety and production.
7
HSE
The policy of Worldwide Oilfield Machine (WOM) is to maintain a Health, Safety, and
Environmental Program by conforming to regulatory standards and best practices while
providing a safe, healthy, and sustainable environment for its employees and customers.
8
Quality
The Quality Policy of Worldwide Oilfield Machine is to meet
and exceed the quality standards expected by our customers by
providing the finest quality products and services as we become the
premier supplier of Well Control Systems and Products.
WOM is committed to comply with the requirements of

industry-regulated bodies (API Q1, ISO 9001:2000) by showing
continual improvements to the effectiveness of the Quality
Management System.
The Quality Policy, Business Mission and Company Objectives are

understood, implemented and maintained at all appropriate levels of
the WOM organization. The Quality Assurance Manual sets forth
the requirements for establishing and maintaining a Quality Man-
agement System at WOM.
9
PATENTED
Magnum Gate Valve
The Magnum Gate Valve incorporates a design which has

become the cornerstone of the WOM product line and is
synonymous in the oil & gas industry for unmatched quality
and unsurpassed service life.
Available in a wide range of material selections and suitable for harsh environments
such as C02 and H2S applications, the Magnum Gate Valve has proven its versatility
in the North Sea, the Gulf Coast, the Middle East, South America, North America,
Africa, Singapore, China and drillships and platforms across the globe and is trusted
by the biggest names in the industry.
Features and Benefits

• Available in sizes 1-13/16” - 9”
• Working pressure ratings of 2,000 to
20,000 psi.
• Full Bore, Through-Conduit Seal
• Bi-Directional Sealing
• Primary (Upstream) Seal
• Secondary (Downstream) Seal
• Lower Torque
• Floating Gate with T-Slot
• Centralized stem threads
• Superior finish on gates and seats
• Balanced forces on gate and seats
• Longer Life of Gate and Seals
• Minimal exposure to contaminants
• Minimal lubricant loss
• Elastomer Assist Metal-to-Metal Seal
or Non-Elastomeric Seals
• Differential Avoids Pressure Lock
• Extended Service Life with Minimum
Maintenance Requirements
WOM Magnum Gate Valve
Can be equipped with pneumatic or hydraulic actuators and is ideally suited for
Manifold and Christmas Tree applications.
10
Advantages of the Magnum Design
T-SLOT GATE
A T-Slot Gate paired with an independent

stem nut allows the gate to float, maintaining
contact with the seats without binding on the
stem and requiring less torque to cycle the
valve during operation.
Compatible with Elastomeric

&
Non-Elastomeric Seals
Gate in the CLOSED Position Gate in the CLOSED Position Gate in the OPEN Position
Primary Upstream Seal presses against If the Primary Upstream Seal fails, the Primary Upstream & Downstream Seals
the gate to provide a seal and avoid Secondary Downstream Seal takes over press against the gate to provide a seal
intrusion into the body cavity. to avoid intrusion into the thru-bore. and avoid intrusion into the body cavity
and thru-bore.
Zero Leak
The heart of this bidirectional valve is the MAGNUM “Sure Seal”. This simple gate/
seat assembly eliminates gate guides, seat skirts and springs. Instead, line pressure
expands the seat assembly against the floating gate forming a true upstream seal.
Gate Valve Standard Trim Chart
Sizes: 1-13/16” through 9” (larger sizes available upon request)

Working Pressures: 2,000 psi through 20,000 psi
Notes:
1. Materials shown are for reference purposes only and are subject to change.
2. Special trims and materials are available, such as duplex stainless steel for bodies and bonnets, Inconel HF for gates and seats,
and Inconel for stems.
3. Abbreviations: SS-Stainless Steel; QPQ-Quench Polish Quench; HF-Stellite/ Colmonoy, W/HF-Hard Facing.
4. -75°F (-59°C) available upon request.
5. Wire-line and fire safe valves available upon request.
6. High temperature (450°F) (232°C) valves available upon request.
7. All QPQ Gate and Seats have an option of Colmonoy Hard-Facing.
8. Alternate material for Stems-Inconel 725
9. Alternate material for HH Trims-Duplex SS
12
13
Research and Development
WOM’s state-of-the-art Research and Development facility allows for in-house testing, which greatly speeds up the
new product development and qualification testing. This lab includes environmental chambers for extreme temperature
testing and testing booths for room temperature testing. The temperature chambers are some of the most advanced
in the world, capable of reaching temperatures from -100°F to 600°F. WOM has successfully completed HPHT API
6A PR2 testing with a temperature range of -20°F to 450°F for 3-1/16”- 20,000 PSI Magnum Gate Valve and 3-1/16”-
15,000 PSI Model 200M Gate Valve.
The lab also includes an advanced control room from where the testing can be monitored remotely, providing a
safe environment away from the actual product testing.
After - 20oF to 450oF Testing
Before - 20oF to 450oF Testing
14
Model 200M Gate Valve
• Available in sizes 1-13/16” - 7-1/16”
• Working pressure ratings from 2,000 psi-15,000 psi
• Forged body and bonnet for the highest mechanical integrity
• Bi-directional flow design offers versatility and increased

service life
• Grease injection fitting located in bonnet, eliminating body

penetration
• Bearing cap grease fitting allows positive bearing lubrication
• Available in standard flange ends, butt weld ends and block body
configurations
• Can be equipped with pneumatic or hydraulic actuators
• The 200M Gate Valve has been API 6A fire tested to 450ºF and
can be fitted for HPHT service
Model 200M Gate Valve
Model WV 200 Gate Valve

• Available is sizes 2-1/16” - 3-1/8”
• Available in working pressure rating of 5,000 psi
• Single piece, floating slab gate reduces deflection and binding at

high pressure
• Material construction forged body and bonnet
• Bi-directional sealing
• Metal-to-metal sealing gate/seat, seat/body and body/bonnet

interfaces
• Low torque requirements to reduce operator fatigue
• Cost efficient gate valve that provides reliable downstream

sealing capability
Model WV200 Gate Valve
15
WOM Subsea
WOM Subsea is a specialized division of Worldwide Oilfield Machine
which is focused on providing custom-engineered subsea solutions to WOM
clients around the globe. Located in Houston, Texas, WOM Subsea is rapidly
growing division of WOM and has recently expanded its operations to a
10,000 sq ft highbay which allows for up to 3 Subsea Intervention Systems
to be worked on simultaneously. WOM Subsea’s operations are closely
integrated with the established infrastructure which WOM has built over the
past 35 years. This gives WOM Subsea easy and rapid access to facilities and
personnel needed to support its operations while remaining focused on
innovation in the subsea space as well as providing its customers with
maintenance, modification, installation, repair and refurbishment and storage
capabilities.
16
WOM Asia Pacific
TM WOM Asia Pacific (WOM AP) formerly known as Magnum Subsea
Systems (MSS), is focused on designing and delivering reliable
subsea systems which meet our client’s technical requirements WOM AP
has combined with WOM SEA (referred to solely as WOM AP) to
provide its customers with Front End Engineering Design (FEED) study,
project Management Services, Field Support Services along with
refurbishment, redesign and recertification Services, all from one point
of contact.
17
18 WOM Magnum Dual Block used for capping on Macondo Well (Gulf of Mexico)
Subsea
Drilling Gate Valve
and Production Applications
• Designed, built and tested to API 6A and 17D
• Tested to a water depth of 13,200 feet
• Anti-explosive decompression seals and energized non-elastomeric lip seals
• Metal-to-metal seal (seat to gate)
• Magnum “Dual-Seal” seat design seals upstream and downstream
• With Magnum “Dual-Seal” seat design seals “thru-conduit”, bonnet can be removed and replaced while
the valve is in working condition. This will minimize the maintenance time and inventory cost for
customers
• Gate and seat faces are hard faced with Colmonoy 4, 5 & 75 and polished to 1-2 RMS. This is for wear
resistance and low operating torque. Tungsten Carbide, Stellite and other
HF material are also available
• Cladding of “all wetted parts” is available
• “T” Slot stem and gate connection

allows the gate to “Float” between seats
without misaligning the stem under
pressure
Magnum Subsea Dual-Block 19

Actuators
Fail Safe Pneumatic and
Hydraulic Actuator
• WOM’s pneumatic and hydraulic actuators are manufactured and tested

to API 6A
• Single forged unitized top cap and cylinder for simple in-line maintenance
• Quick disconnect mechanism allows for fast removal without disturbing the
body/bonnet connection and provides immediate access to stem packing
• Anti-explosive decompression seals and energized non-elastomeric

lip seals are available
• Factory preset drift eliminates the need for field adjustments
Hydraulic Fail Safe Actuator
Pneumatic Fail Safe Actuator
20
Features and Benefits Magnum Subsea Actuator
• Magnum Subsea Actuators are designed, built and WOM’s Magnum Subsea Actuator design boasts a “Truly Fail
tested to API 6A and 17D Safe”capability- no line pressure or hydraulic control pressure
is required to assist in closing the valve. A unique feature of
• Magnum Subsea Actuators are designed and tested the Magnum Subsea Actuator is its “Double-Safe” design
to a water depth of 13,200 feet which incorporates a single acting fail-safe hydraulic actuator
with a spring return. In addition to an ROV mechanical override,
• Equipped with anti-explosive decompression seals
the Magnum Subsea Actuator offers an additional port to
and energized non-elastomeric lip seals
accommodate ROV hydraulic override.
• Pressure equalization system maintains 0 psi
differential pressure
• Factory pre-set drift eliminates the need for field

drift adjustments.
Single forged unitized top cap and cylinder for simple in-line
maintenance
Actuator body completely contains compressed spring
Quick disconnect mechanism allows fast removal without disturbing

body/bonnet connection. Provides immediate access to stem packing
Factory preset drift eliminates need for field adjustment
“T” slot stem and gate connection allow gate to “float” between seats
without misaligning the stem
Gate and seat faces are hard-faced and polished for wear resistance and
low operating torque
Full bore through-conduit flow in full open position
Magnum “Sure-Seal” mechanism is pressure-energized for

upstream/downstream sealing, equalizing line pressure on
both sides of the gate
Magnum Subsea Gate Valve with
Fail Safe Actuator 21
Slurry Service Gate Valve
Designed for mud, cement, fracturing and water service to handle high and fluctuating
pressure and abrasives.
• Available in sizes 1-13/16” - 5”
• Available in working pressure ratings from 3,000 psi-10,000 psi
• Features WOM’s patented Magnum Dual Seal™ system
• Thru-Conduit seal eliminates the turbulence experienced in

paddle gate mud valves
• Skirted seat assembly prevents contaminants from entering the

valve body cavity
• Body cavity is exposed to line pressure only during valve

opening and closing
• Better lubricant retention, less exposure to line contaminants and

longer service life than comparable valves
Magnum Mud Gate Valve
• Can be easily serviced in-line and all internal components can be
Skirted DUAL-SEAL TM
inspected and replaced
Seat Assembly
(Magnum Gate Valve) • All mud valves meet or exceed the requirements for API 6A
Model 600 Mud Valve

The Model 600 Mud Valve was designed for corrosive CO2
injection and waterflood applications in the enhanced oil
recovery market. It is commonly used for applications such as
high pressure mixing lines, standpipe manifolds, wellheads,
production manifolds and production gathering systems.

• Available in sizes 1 13/16” - 5 1/18”
• Available in working pressures from 5,000 psi and 7,500 psi
• Floating slab gate design
• Heavy duty roller bearings
• Seat assembly engineered with “lock shell” ensures accurate seat alignment
• Available with threaded, welded and flanged end connections

Model 600 Mud Valve
• Rising stem design with visual position indicator lens
22 • Replaceable stem packing

Line Pressure Operated SSV
• Available in sizes ranging from 1-13/16” - 7-1/16”
• Available in working pressures from 2,000 psi to 20,000 psi
• Ideal for single point protection where control pressure is not

available, installed as a secondary master on a tree, on flow lines,
header valves, gathering lines, pipelines and transmission lines
• Self-operating system which uses line pressure as control pressure

to activate the actuator
• High and low pressure pilots sense line pressure continuously.

Abnormal pressure changes cause the pilots to exhaust control
pressure from the safety valve, closing the valve
• Centralized stem threads and T-nut combined with T-slot gate

reduce the overall torque needed to cycle the valve
• Colmonoy 4, 5 & 75, Tungsten Carbide, Stellite and other HF

materials are available
• Compatible with elastomer-assist metal-to-metal seals or

non-elastomeric seals
WOM’s Line Pressure Operated Surface
Safety Gate Valve
23
PATENTED
Dual-Seal Ball Valve

WOM’s Dual Seal Ball Valve is the only ball valve in the oil & gas, pipeline, petrochemical and process industries
that boasts two independent seals on both the upstream and downstream sides of the valve. If the Primary Seal
becomes damaged during operation, the Secondary seal will automatically engage. The integrity of the Primary Seal
can be checked while the valve is still in-line. This translates into minimal downtime for the operator, as replacement
valves can be brought out to the field before the valve even fails. WOM’s
Dual Seal Ball Valve can also be configured to have a third seal
on the downstream side of the valve, providing reliability and
protection unmatched by any other ball valve in the industry.
Secondary Seal
Dual-Seal provides an extra

Primary Seal level of sealing protection
from leaks
TWO VALVE MODELS, both having the patented Dual-Seal seat technology:
• Model 30 – bolted on External upper and lower trunnions
• Model 40 – patented Internal split trunnion blocks - allows the stem to be installed before the valve is
assembled. Available in sizes ranging from 2” to 36”, Available in ASME Pressure classes 150-1500,
with working pressures ranging from 285 psi to 3,705 psi
1 2 3
Body Body Body
Ball Ball Ball
1 Optional metal-to-metal 2 Optional Corrosive Resistant 3 Third Seal: O-Ring moved to

24 Primary Seal with Tungsten Alloy (CRA) Welded Inlay in inside diameter of Secondary
Carbide Hardfacing available Seat Pockets or other Sealing Seal changes it to a Third Seal
Areas.
Features and Benefits for Model 30 & 40
• Primary Seal acts as a wiper ring to clean off the ball and protect the Secondary Seal
• All valves are Double Block and Bleed (DBB)
• Engineered to prevent pressure build-up in the body eliminating the need for thermal relief
• All Dual Seal Ball Valves are ISO Fugitive Emissions Certified
• Available in working pressures from 2,000 PSI to 5,000 PSI
• All valves are Fugitive Emissions certified per ISO 15484-1: 2006
• Fire-Safe per ISO, API 6FA, or API 607
• Integral stop ensures precise 90 degrees of rotation
• Patented Split-Block in the Model 40 features the Valve stem inserted from body interior, making the stem
positively blowout proof
• In Liquids service there is no need for external pressure relief from thermal expansion. Valve self-relieves
internally
• Optional Third Seal for additional protection, and to control which end of the valve the thermal relief will
bleed to
• Optional Metal to Metal Primary seat for severe service conditions
• Designed to replace through-conduit gate valves in mainline service

25
Dual-Seal Ball Valve Trim Chart
WOM Dual Seal ™ Ball Valve Material Selection
Component Trim A Trim B Trim C Trim D Trim E Trim F Trim G
General Service- Oil, Low Temperature Highly Corrosive Oil and Highly Corrosive
Severe or Sour Brine Severe Sour Service- Oil
Natural Gas, Reﬁned Service -Oil and Gas Mild Brine Service- Gas H2S/CO2 Sour hydrocarbon and
Service - and Gas NACE S.S. Trim
Products Service Temp Range: -29C to Service- NACE Full S.S. chemicals NACE Full S.S
Temp Range: -29C to Temp Range: -29C to
Temp Range: -29 to Temp Range: -45C to +121C, -20F to +200F Temp Range: -29C to Temp Range: -29C to
+121C, -20F to +200F +121C, +20F to +200F
+121C, -20F to +200F +121C, -50C to +200F +121C, -20F to +200F +121C, -20F to +200F
Alloy Steel controlled

Alloy Steel, Q&T Alloy Steel Seat Pockets
Body, End hardness, RC-22 max. Alloy Steel controlled
Alloy Steel controlled hardness RC- overlayed with 316 S.S. CF8M Cast Stainless Steel Duplex Stainless Steel
Connections (1) Seat pockets overlayed hardness A216 WCB
22 max A216 WCB A216 WCB
with 316 S.S A216 WCB
4130 Alloy Steel

Stem 4130 Alloy w/ENP w/ENP Controlled 4130 Alloy w/ .003" ENP 17-4 PH S.S Inconel 718 Inconel 718 Duplex Stainless Steel
Hardness
Carbon Steel/ Carbon Steel/ Carbon Steel w/.003"

Seat Assembly 17-4 PH S.S 17-4 PH S.S 17-4 PH S.S Duplex Stainless Steel
Electoless Nickle Plate Electoless Nickle Plate Electoless Nickle Plate
Carbon Steel/ Carbon Steel/ Carbon Steel w/.003"

Ball 17-4 PH S.S 17-4 PH S.S 17-4 PH S.S Duplex Stainless Steel
Electoless Nickle Plate Electoless Nickle Plate Electoless Nickle Plate
Seat Insert PTFE/Nylon PTFE/Nylon PTFE/Nylon PTFE/Nylon PTFE/Nylon PTFE/Nylon PTFE/Nylon
Stem Seal (2) Viton Viton Viton Viton Viton Viton Viton
Springs 17-7 S.S Inconel X-750 17-7 S.S Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
O-Rings (3) Viton Low Temp O-Ring Viton Viton Viton Viton Viton
A193-B7 Fluropolymer
Bolting A193-B7 A193-L7M A193-B7 A193-B7M A193-B7M A193-B7M
coated
Body Fittings Carbon Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Notes:
1. C.R.A (Corrosion Resistant Alloys) inlay in seat pockets can be added to any valve
2. Upper stem seals are self-energized Viton seals with additional Viton back up O-rings
3. Various O-ring materials can be used depending on temperature range and service conditions
4. Fluorocarbon coating on bolting is optional
26
Diverter System Valves
• Rugged construction
• Dual-Seal™ technology offering Primary and Secondary Seals
Annular BOP
• Optional Flush ports to wash contaminants from body
• Repairable on the rig or reverse the valve for a new set of seals
• Integral stop for accurate positioning of open/closed
• Hydraulic automation available
Dual-Seal Ball Valve
NO FUGITIVE EMISSIONS
ISO Spec 15848-1: 2006 (E), valve cannot exceed 50ppm of fugitive emissions after1500 full pressure openings at 2220 psi.
The Dual-Seal Ball Valve passed this test with standard stem seals.
27
Wellhead and Christmas Tree Systems
The Patented Magnum Gate Valve, the key component of any WOM
wellhead system, provides the most reliable long-term seal and
lowest lifecycle costs. WOM designs, manufactures and supplies Wellhead
and Christmas Tree Systems of all sizes, working pressures, and trims.
The WC-22 wellhead system is the standard for outstanding service -
onshore and offshore. The WC-22 wellhead system can be built to meet
specific requirements for pressures from 2,000 psi through 20,000 psi, with
metal-to-metal seal technology being standard on high-pressure Typical WOM XMAS Tree
applications.
Wellhead Products
Casing Heads
WOM’s vast offering of Casing Head designs guarantee that our equipment is
compatible with any industry-standard system. Casing Heads are compatible with
WC-21, WC-22 and WC-29 casing hangers and Mandrel casing hangers.
WOM’s Casing Heads can be used in onshore and offshore environments, for
general and sour service and in conventional or specialty wellhead systems.
WC-22 BTS BP Casing Head
• Manufactured to API 6A and available in nominal flange sizes from 11” to

21-1/4” in pressure ratings to 10,000 psi
• Outlet options available are threaded, studded, and flanged
• Available with two lockscrews/full sets of lockscrews or without lockscrews
• Optional bottom preparation including slip-on weld (SOW), Threaded bottom, WC-29 SOW-BP Casing Head
or Slip Lock bottom preparation
• PSL-1 to 3 certified
• PR-1 certified
• Available trims in DD-NL, EE-NL, FF-NL, and HH-NL
• Optional Landing Base Plate assembly available for 20” to 30” conductor pipe
WC-29 SL MS ET Casing Head
Casing Head Spools

WOM Casing Head Spools are designed to accept WC-21, WC-22 and WC-29 casing
slip hangers as well as Mandrel casing hangers. WOM’s Casing Heads can be used in
onshore and offshore environments, for general and sour service and in conventional or
specialty wellhead systems.
• Available in nominal flange sizes from 11” to 13-5/8” and pressures

WC-29 MS ET Casing Head Spool
ratings to 15,000 psi
• Manufactured to API 6A specification or customize to meet customer

requirements.
• Outlet options available to meet customer requirements
• Available with two lockscrews/full sets of lockscrews or without lockscrews
• Optional integral double FS-Seal, P-Seal, and metal-to-metal seal bottom

preparation for high temperature and high pressure (HTHP) application 29
WC-22 FS BP Casing Head Spool
Wellhead Products Con’t.
Tubing Head Spools
WOM’s Tubing Head Spools feature a straight bore design for single and
multiple completions. This design accepts all WTC series tubing hangers and
easily converts from a single completion to multiple completions
• Available in nominal flange sizes from 7-1/16” to 11” and pressure

ratings to 20,000 psi
WTC-MS1-ET Tubing Head Spool
• Outlet options available to meet customer requirements
• Designed to accept WC-21, WC22, and WC29 casing slip hanger and
Tubing hangers
• Available with full sets of lockscrews
• Optional integral single or double Down Hole Control Line (DHCL)

preparation
• Optional integral double FS-Seal, P-Seal and interchangeable metal-to-

WTC-FS-ET Tubing Head Spool
metal seal bottom preparation for HTHP application
Tubing Hangers
WOM Tubing Hangers allow for nippling up/down the Christmas tree without
blowout preventer (BOP) protection. WOM Tubing Hangers feature an annulus
compression elastomer seal pack off or an optional annulus metal-to-metal seal
energized by a compression ring.
• Available in nominal sizes from 7-1/16” to 11” and pressure ratings to

20,000 psi
• Manufactured to API-6A specifications with stainless or Inconel body

material and can be customized
• Extended Neck with multiple elastomer type seals or optional metal-

to-metal seals are available for high temperature and high pressure
(HTHP) application
• Annulus compression elastomer seal pack off or optional annulus metal-

to-metal seal are energizing by compression ring
• Available with internal or external running and retrieving thread
• Standard type “H” Back Pressure Valve (BPV) preparation
• Available with API or Premium bottom internal thread

WOM WTC Series Tubing Hangers
• Available with or without continuous and non-continuous Down Hole

30 Control Line (DHCL) preparation
Tubing Head Adapters
WOM Tubing Head Adapters are suitable for
conventional and specialty wellhead systems, onshore
and offshore and general and sour service applications.
Designed for containing pressure and fluids within the
tubing bore. WOM Tubing Head Adapters are fully
customizable for the project at hand. Options include
continuous or non-continuous Down Hole Control Line
inlet preparation and integral manual or actuated Lower
Master Valve. WOM Tubing Head Adapters
• Available in studded or flange bottom sizes from 7-1/16” to 11” and studded or flange top sizes from 2-1/16” to 4-1/16”,
with pressure ratings for both to 20,000 psi
• PSL-1 to 3G certified
• PR-1 certified
• Available trims: DD-NL, EE-NL, FF-NL and HH-NL
• Available with S-Seal or metal-to-metal seal bottom preparation
• Available with or without continuous and non-continuous Down Hole Control Line (DHCL) inlet preparation
• Available with integral manual or actuated Lower Master Valve
31
Single Piece (SPTM) Wellhead System
WOM’s SPTM Compact Wellhead is a single-piece, compact wellhead system developed to accommodate different
requirements of working pressure and casing programs. The SPTM Wellhead uses a minimum number of components all
which are interchangeable within the system resulting in reduced installation time, possible leak paths and overall costs.

• Compact design saves space and permits the use of smaller
platforms at a reduced cost
• Nominal size 9”, 11”, 13-5/8” or 18-3/4” and pressure rating

of 5,000 psi or 10,000 psi
• Available in 2 or 3 stage hanger systems
• “WQ” Quick Connector on housing top connection
• Casing programs offer flexibility and can be easily changed

on site
• Fluted mandrel-type hangers for effective cementing flow-by
• Mandrel-type hangers offer complete BOP control, eliminating

work under BOP stack and enhancing safety
• Internal lockdown for hangers
• Same pack-off for all sizes of mandrel hangers
• Elastomeric and metal seal assemblies are interchangeable
• Design based on field-proven and fully tested technology
• Enhanced safety with minimum through-wall penetrations WOM Design SP 3 Stage Wellhead System
• Cold cut option is available for emergency purposes
• Designed to meet API 6A, latest edition to PSL 1-4,

Temperature Rating 0-350° F and Material Classification
AA-HH meet NACE requirements
Multi-Completion (WMCTM)
Wellhead System
WOM WMCTM Wellhead System combines two or more wellhead systems,
providing the ability to reach multiple pay zones, from a single conductor.
• WMCTM Wellhead System is WOM’s field-proven SPTM

Wellhead, that offers a compact, safe and reliable solution to
multiple completion projects
• Fewer connections in the system results in significant rig time

reduction
• Reduced envelope dimension allows for smaller platform

requirement
• Various casing separation methods are available to meet

specific drilling requirement
• Full metal to metal (MTM) seal completion is available
• Available in 2-in-1 and 3-in-1 configurations
• Individual wellheads can be configured to have a 9”, 11”, or

13-5/8” nominal size, up to a 10,000 psi pressure rating and a
Multi-Completion (WMCTM) W
ellhead System temperature range of -75oF to 250oF
• Manufacturing meets API Spec. 6A standards, and can be

specified to meet at the material class, temperature class, and
PSL level requirements of this specification
33
Manifold Systems
WOM specializes in the manufacture of manifolds for a complete range of onshore and offshore applications. WOM Manifold
Systems may incorporate WOM Magnum Gate Valves, Check Valves, Chokes and WOM Actuators depending upon the
application. WOM manifold designs meet virtually any industry requirement, including H2S environments up to 20,000 psi.
Skid mounted and fully automated packages are available complete with control panels and instrumentation.
Choke Manifolds
WOM’s Choke Manifolds incorporate Magnum Gate Valves which have set the industry standard for reliability. All Manifold
Systems are tested for function and pressure rating prior to delivery. WOM offers Choke Manifolds in five valve rectangular and
four valve diamond patterns for limited space on offshore rigs.
34
Cement Manifolds
WOM’s Cement Manifolds are available in working pressures up to 20,000 psi. Each system incorporates Magnum Gate Valves or
Model 700 and is designed for heavy slurry and high pressure. WOM can designs and manufactures Cement manifold to meet any
custom requirements.
Standpipe Manifolds
WOM’s Standpipe Manifolds incorporate Magnum Mud Gate Valves or Model 600 Mud Gate Valves and are rated for pressures up
to 10,000 psi. Welded, flanged, hubbed, high-pressure fittings and hammer union constructions are built to meet customer preference.
All systems are designed, manufactured and certified in accordance to recognized oilfield standards. 35
Blow Out Preventers
Typical WOM WGK Annular and
WU Ram Type BOP Assembly
For onshore and offshore operations, WOM manufactures popular Annular and Ram BOP designs.
WOM is certified to ISO 9001

Designed to NACE MR-01-75 materials standard for resistance to sulfide stress cracking.
Ram Type WU BOP
The WU BOP’s simple and compact design makes it well suited for operations offshore and onshore. WOM’s WU
BOP’s parts are fully interchangeable with U-Type BOPs in the market. The operation system of WU BOPs are
designed to provide a fast and reliable closure around pipe or casing in the well bore. The sealing is energized by the
pressure and is maintained even with loss of closing pressure. WOM’s WU BOPs are operating in various places all
over the world such as USA, Algeria, Kuwait, UAE, India, Indonesia, China and Oman.
WU Ram BOP
• Available in sizes ranging from 7”-5K to 26”-3K
• Ram packing is generous and self-feeding. It cannot be dislodged by fluid flow
• Operating pressure is moderate, due to the large area of the piston
• Changing the ram is quick and easy
• Hydraulically operated locking mechanisms to hold the Rams closed without actuation pressure
• Seals and a vent hole prevent well pressure from bleeding into operating cylinder
• All operating parts, as well as rams and seals, can be replaced on location, thus providing
a completely reconditioned preventer
37
WGK Annular BOP
The WGK Annular BOP has proven reliability with an
easy to operate design. The piston and packing unit are
the only moving parts, ensuring minimal wear. The WGK
Annular BOP is safer and more efficient, requiring less
maintenance and downtime. WOM offers both WGK
Screw type and WGK latch type Annular BOPs.
• Available in sizes ranging from 7”-5K through 21” - 3K
• Conical bowl design of the piston provides a simple and

efficient method of closing the packing unit
• Design enhances the ability of the packing unit to reopen

WOM WGK BOP (Latched Type)
to full bore position
• Remaining packing unit life is measurable without

disassembly and ensures the longest and safest use of the
packing unit
• Pipe can rotate and tool joints stripped without breaking

the seal during engagement
• Optional packing unit rubber compounds permits more

flexible applications
WOM WGK BOP (Screw Type) 39

Subsea Intervention System
The Subsea Intervention System is fitted with an Emergency Shut Down (ESD) control system. The system will carry out
a controlled closure of the Flowhead, EDP (Emergecy Disconnect Package), and LRP (Lower Riser Package)
valves in emergency situations. The Intervention System Components, Flowhead, EDP, LRP and Choke Manifolds
will isolate and secure the well. Additional components of the Subsea Intervention System are the HPU (Hydraulic
Power Unit) and the Umbilical Reeler.
• Compact, lightweight modular system design
• Significant weight and space advantages
• Can be run guideline or guideline less
• Safely work over wells from much smaller, less expensive vessels
• Offers two levels of redundancy for safety
• Ability to isolate wellbore pressure when changing out tools
• Ability to cut 2-7/8” coil tubing to shut in the well
• The WOM “Sure-Seal” has proven to successfully seal the well after
cutting, in low pressure gas testing
• Will interface with both Horizontal or Vertical trees
• Quickly adapts to Tree Running Tool’s (TRT) and or wellhead connectors

offshore
• The system can be outfitted for Riser or open water wireline operations
• Full metal-to-metal thru bore sealing on all well control valves

WOM's Subsea Intervention System
being deployed on Cal Dive's (Helix) Q-4000 • Capable of shearing coil tubing and wireline/slickline
• All pressure containing valves and components rated to full working

pressure (thru bore and annulus)
• Can be deployed on dedicated intervention vessels or, vessels of

opportunity (VOO) - MODU’s
• On board hydraulic equipment (SPM’s, regulators, subsea accumulation)

allow for direct hydraulic or MUX control system interface
• IWOCS control lineswith pass thru capabilitiy eliminates the need for
Guillotines or running of IWOCS unbilical over the side.
40
Intervention Riser System
41
Subsea Intervention
Deployment Summary Chart
42
The WOM Intervention Riser System (IRS) as operated from
2003 to 2015 have performed nearly all aspects of intervention
operations. The systems have operated in real time well pressures
of up to 9000 PSI and water depths exceeding 9000 feet. The chart
shows some of the major operators and water depths that the WOM’s
IRS systems have completed intervention projects in.
43
Subsea Intervention Package
Emergency disconnect package Features
The Emergency Disconnect Package (EDP) forms the upper section of the Intervention System when connected to the Lower
Riser Package (LRP). The EDP serves as the disconnect package and also adds another pressure barrier for the wellbore
and annulus when in normal riser based operations. The interface to the riser is completed at the top of the RTV (Retainer
Valve) block valve on this portion of the package. The EDP assembly consists of the EDP connector and the RTV valve
block and EDP annulus valves. This equipment is assembled and secured in a suitable frame complete with control system,
pressure compensation system, umbilical termination and annulus termination, accumulation, regulators and ancillary
equipment.
SLIM SUBSEA INTERVENTION
BORE DRILLING SYSTEM
The unit consists of: Emergency Disconnect Package
PACKAGE
• 7-3/8” 10k Retainer valve block
• Hydraulic Collet Connecter
• 2” bore annulus female receiver
• 2-1/16” 10k Manual Annulus valves
• ROV intervention panels SURFACE
• Subsea Accumulators BOP STACK
• Hydraulic coupler moving stab plate assembly
• IWOCS pass thru capability
• EH/MUX equipment
• Controls and ancillary equipment
• Frame
Lower riser package

The Lower Riser Package (LRP) Emergency
forms the indpendent well
control barrier immediately aboveDisconnect
the ProductionPackage
Tree or Wellhead.
The LRP interfaces with the EDP package by means of a hub end
reentry mandrel. The LRP package SUBSEA encompasses the dual valve
block assembly that facilitates the well bore sealing mechanism.
SHUT-OFF DEVICE
The Lower cutting valve (LCV) is capable or cutting tubing while
the Upper Cutting Valve (UCV) is capable or cutting slickline/
wireline. The annulus valve arrangement on the LRP completes the
capabilities to access all areas of the well with redundant barriers.
This equipment is assembled and secured in a suitable frame
complete with control system, pressure compensation system,
umbilical termination and annulus termination, accumulation, Lower Riser Package
regulators and ancillary equipment.
The unit consists of:

• Hydraulic Connector • 7-3/8” 10K Dual Valve Block
• Annulus Crossover valve arrangement • 13-5/8” 10K hub end Re-entry Mandrel
• Hydraulic Control Coupler Plate • Subsea Accumulator bank
• Support and protection Frame • ROV Intervention panels
• IWOCS pass thru capability • Controls and ancillary equipment
• Frame
Riser-Less Light Well Intervention System
With WOM’s modular design concept, the basic building blocks of the system allows many of the same pieces to be
used both in the riser based and riser-less intervention systems. Many of the same features of the riser based system are
incorporated into the riserless system, i.e. controls options, dual barrier on the LRP package, full cutting capability for wire
and e-line, IWOCS pass thru, etc.
WOM’s Riser-less Light Well Intervention (RLWI) system is designed to perform all types of wireline jobs using braided wire
or slick line. It enables operations of tool strings with variable length, and is can be designed with or without the capability of
circulating well fluids to the intervention vessel. The system is flexible and can perform operations on all Subsea Tree
configurations for production and injection wells.
45
Subsea Trees
WOM offers Production & Injection Subsea Trees
for both shallow water and deep water applications,
rated up to 15,000 psi and designed to API 17D
specifications.
Vertical Tree Systems

• Available in mono-bore and dual-bore configurations
• Mono-bore configuration built with WOM

Patented Magnum Gate Valve blocks available with
nominal bore sizes up to 5”
• Dual-bore configuration incorporates annulus

access valve to monitor annulus pressure
• Dual-bore configuration available with production bore

up to 5” and annulus bore up to 2”
Horizontal Tree Systems

• Horizontally positioned primary valves give easy access WOM’s Mono-bore
for tubing retrieval and workover intervention without the need for Vertical Subsea Tree
removing the tree
• Available with production bores up to 5” and annulus bores up to 2”
• Tubing hanger features metal-to-metal seal
• Guide funnel allows for running without guide wires
• Optional protective structure is available
Mudline Suspension Tree

• Paired with WOM’s MLS Wellhead, the diver-assisted mudline suspension
tree is a cost-effective solution for shallow water completions
• Available with production bores up to 5” and annulus bores up to 2”
• Utilizes WOM’s dual-seal hydraulic and manual gate valves
• Tubing hanger has required tubing preparation and downhole control functions
• WOM’s WQ Mechanical Connector reduces make-up/ break-up time
• Optional protective structure available

46 WOM’s Mudline Suspension Tree
Subsea Manifolds
One of our major areas of expertise includes the design and construction of Subsea Manifolds, PLETs
and PLEMs. We provide detail engineering and project management to our clients to ensure successful
completion of these structures. The reliable Magnum Subsea Gate Valves and Actuators have been
incorporated in several applications of subsea manifolds and Pipeline End Terminations including the East
Sterling manifold installed in the North Sea and the Chevron PLETs installed offshore Angola.
• WOM provides custom engineered subsea manifolds along with the project management support to ensure successful
completion of these projects
• Subsea manifolds can be configured with provisions for multi-well tiebacks, flowmeters, chokes, check valves, control
systems and inlet and oulet flowline connection systems
• Optional insulation system
• Cathodic protection system
47
Subsea Connection Systems
WOM’s subsea connections use hydraulically
actuated Collet segments or a lock ring to
connect to the hub and generate preload. A
self-locking taper on the Cam ring enables
the connector to maintain preload without the
need for an external locking pressure
• Wellhead/XT Connector
• Riser adaptor/EDP/LRP Connector
• Flowline/Jumper Connector
WOM’s 7-5K Flowline Connector WOM’s 18 ¾-10K Connector

Subjected to Bending Load Test
Well Containment System

Well Containment Device (WellCap) is used in the
event of an uncontrolled flow from an existing subsea
tree or wellhead during well intervention and light
completion and work over’s.
The Wellcap can be deployed from any Semi, Drillship

or mono hull type vessel that meets the weight and
loading requirements. This allows the system to be
situated over a flowing well with the thru bore open and
unobstructed to allow the well fluids to pass thru the
WellCap.
• Dual ram assemblies
• Lightweight assembly capable of being deployed on

cable, drill pipe or riser
• ROV-operated controls and on-board accumulators

eliminate the need of an external power supply to
secure the well.
• Accumulators can be recharged thru a conduit line

from the surface or a SAM
• Two dual block valves act as fail-safes and provide

48 venting and circulation underneath the rams
Slimbore Drilling Package
WOM’s Slimbore Drilling Package is a 13-5/8” full-bore, modular
well control package designed for offshore drilling, completion
and work over (intervention) applications particularly where rig/
moonpool space is limited.
• Maximum working pressure of 10,000 psi at a depth of 10,000 ft
• Modular uncomplicated design facilitates assembly,

deployment and routine maintenance
• Redundant hydraulic, acoustic and mechanical controls with

positive feedback ensure reliability and safety.
• Standardized components for ease of operation and

maintenance as well as simplified logistics and spare parts
inventory
Subsea Shut-Off
Device
Provides emergency backup well control in the event of
BOP and control unit malfunctions
• Able to cut and seal both wireline and coil tubing
• Optional wellhead connector & mandrel profile designs

available
• Can be configured for guideline or guideline-less appli

cations with required coating and cathodic protection
• Controls are isolated form standard BOP control sys

tems and have backup ROV intervention interfaces for
increased redundancy and safety
49
Pump Saver
WOM’s Magnum Pump Saver uses easy-to-install rupture disks which require no
special tools to remove and replace. Pump Savers from WOM are available up to
10,000 psi and are more accurate than standard industry pop/relief valves. WOM’s
Pump Saver offers a consistent +/- 5% repeatability up to 3,500 psi and a remarkably
precise +/- 3% repeatability over 3,500 psi.
• 4 times more accurate than pop/relief valves
• Quick Make-up Cap Assembly
• Manufactured from quality high pressure forged materials
• Available in a wide choice of end connections
• Trimmed to handle H2S and salt water contents
• New rupture discs can be easily and quickly replaced

WOM Pump Saver with high pressure
• WOM’s Pump Saver is completely interchangeable with existing flanged end connections
pop or relief valves.
Check Valves
WOM offers a lift type check valve for the prevention of back flow in high pressure and/or high temperature mud lines,
choke & kill manifolds and Christmas tree injection and kill lines. Available in sizes 1-13/16” through 4-1/16” (larger
sizes available upon request) and pressure ratings of 3,000 psi through 20,000 psi, WOM Check Valves can be configured
with flanged, butt weld, hub type, or a combination of end connections to suit customer’s specifications.
Standard Type “R” Check Valve Lock-Open Type Check Valve

Chokes
WOM manufacturers a wide range of
low maintenance chokes. All chokes are
manufactured to API 6A with a choice
of trims, temperature ratings, and end
connections to meet a variety of services.
• Positive and Adjustable Chokes

available in pressure ratings from
5,000 psi to 20,000 psi
• Positive and Adjustable Chokes

available with inlet and outlet
flanges from 2-1/16″ to 5-1/8″
WOM Positive Choke WOM Manual Adjustable Choke
WOM’s Choke Manifold 51

Controls and Instrumentation
Standard Control Panel
WOM’s Standard Control Panels come in stand-alone, b lind HPU and remote
wall mount configurations.
■ API 16C Drilling Conformance
● Nitrogen Connection
● Rig Air Connection
● Casing Pressure
● Drill Pipe Pressure
● Choke Position
● PSC
● Primary and Back Up Pump
● Emergency Hand Pump
● Accumulator
■ Lid for Protection Against the Elements
■ Choke Speed Control
■ Stainless Steel Cabinets Type 316SS
■ Suitable for Zone 1
Custom Control System - Deepwater

WOM’s Choke and Kill and Buffer Manifold (MPD) Control Systems can be
configured with the following features:
■ Local Control Panel
● Manifold Pressure Monitoring
● Hydraulic Gate Valve Control via Touchscreen HMI
● Valve Position Feedback via HMI
● Local/Remote Control
● Standard Hydraulic Internals
● Choke Speed Control
● Suitable for Zone 1
■ Remote Control Panel

● PLC/ 15” HMIs
● Data Logging
● Gate Valve Control via HMI
● Position Feedback on HMI
● Choke Speed Control
● Interface/Communication with Driller’s Control System
● Suitable for Zone 2
■ Stainless Steel Cabinet Type 316SS
■ System Integration with Drillers Panel
■ PLC/HMI
● 15”/19“ HMI
▪ Widescreen-TFT-Display
▪ 16 million Colors
▪ Profinet Interface, MPI/profibus DP Interface
▪ Panel Mount Design
● Dual Power Supplies with Redundancy Module
● DP/DP Coupler
● Integrated Display on PLC Faceplate for Controller Status
■ Software
● PLC and HMI Software written based on Graphics
● Integrated System Diagnostics
● Fast Error Localization and Error Analysis
● Configuration of the Diagnostics is Integrated in the PLC/HMI
System in a User-Friendly Way
● Identical Visualization of Error Messages in the
Software Portal, on HMI, on the Web Server and on the PLC
CPU in Plain Text Format
■ ATEX Third Party (Notified Body) Certified for Hazardous

Area Operation
■ DNV & ABS Certification
Industry Standards
■ API 16C ■ DNV-OS-E101
■ ABS CDS ■ ATEX
■ IECEx ■ CSA
■ Norsok
ESD System
WOM’s ESD system provides functional safety shutdown in the e vent of a
hydrocarbon escape or other dangerous event. WOM provides:
■ Control Console ■ Shut Down Stations
■ Hydraulic Hoses ■ ESD Valve
Gauge Calibration Service

WOM Controls offers “Annual Rig Gauge Calibration Services” to drilling
contractors around the world. We will visit the rig with a calibrated test
pump/ gauge. This will be used to verify that all gauges on the rig
(digital and hydraulic) are within calibration. If found outside of the
parameters, we will install a replacement gauge based on rig spares
availability. The faulty gauge would be returned for repair. We will put
a sticker on each gauge successfully calibrated showing annual calibration
date. A report showing all gauges will be submitted to the rig.
Digital Gauges
WOM’s Controls also manufactures Digital Gauges for the control systems,
such as: pressure gauges, PSC (pump stroke counter) gauge, CPI (choke
position indicator) gauge. Datasheets are available upon request. 53
Well Test Equipment
Magnum Technology Center (MTC) designs and manufactures complete
equipment packages for well testing & production and managed pressure
drilling services and offers an extensive catalog of onshore and offshore
well test equipment that has been specifically designed to be as compact
and easily deployable as possible. As part of the WOM Group, MTC
has full access to the resources and engineering capacity of WOM and
A WOM Group Company makes liberal use of Magnum valves in all of its well test equipment.
Fully certified to industry and governmental standards and backed up by
extensive operational experience and customer support, MTC delivers
well test equipment that is suitable for virtually any well test application.
Well Test Valves
WOM’s Well Test Valves take full advantage of the
Magnum design providing a bi-directional, thru-
conduit, upstream and downstream seal. WOM’s Surface
Safety Valves (SSV) and Wireline Cutting Gate Valves
are enclosed in a protective frame to protect the valve
during use. WOM’s SSV’s and Wireline Cutting Gate
Valves are trusted by oilfield operators throughout the
industry to reliably close and cut under any condition.
Both the SSV and the Wireline Cutting Gate Valve meet
API standards and can be provided with a variety of
connections including hammer lug unions, Graylocks, API
16A hubs or API 6A flanges.
SSV’s can be configured with a manually operating

hydraulic pump or a hydraulic control unit with
Emergency Shut Down system.
The Wireline Cutting Gate Valve is capable of cutting

braided line or slick line up to 7/32″ in diameter and
provides a single point cut to ensure a reliable seal after a
cutting
Flowheads
• WOM’s Modular Flowhead uses a tubing swivel to allow for string
rotation without the need for rotation of the flowhead itself
• WOM’s Solid Block Flowhead Systems are designed with the

choke and kill line outlets at a downward angle in order to satisfy
minimum space requirements
• Flowheads can be supplied with any connection type and are

manufactured, assembled and tested as a complete field unit
• WOM offers both Modular Flowheads and Solid Block Flowhead

Systems
• Removable crash frame included to provide protection for valves

and actuators
• All valves are single-piece slab gate valves with hard faced surfaces
55
Custom Design and Manufacture
Customer requirements for controlling
unique pressure situations may not always
be successfully achieved by off-the-shelf
components. To address these potential
situations, WOM provides custom designed
systems for onshore, offshore and subsea
applications. All of WOM’s custom
designed production equipment utilizes
Magnum technology wherever possible to
provide the highest level of reliability in
every package. WOM’s custom designed
packages are made to meet and surpass
the guidelines of both the client and
industry regulatory agencies. All custom
packages are manufactured using the API
and ISO approved facilities and methods
with which WOM’s standard products are
manufactured.
The basic building block of these systems is the Magnum Gate Valve. The versatility, adaptability and reliability of
this valve design ensures ease of incorporation with other components to provide greater safety, longer service life
and minimized maintenance.
56
Global Service and Support
As a manufacturer of quality products, WOM provides factory authorized service on all of its products through
strategically located service centers throughout the world. Particular emphasis has been placed on serving regions that
are especially active in drilling, completion and production such as North America, Europe, Far East, Middle East and
Southeast Asia.
With WOM you get superior systems, engineering, manufacturing and worldwide service and support. All WOM
products meet ISO and API standards and quality requirements. WOM offers prompt delivery and dependable after-
the-sale service.
Along with manufacturing and refurbish-

ment, WOM provides in-the-field service
support for its complete catalog of
equipment. WOM’s team of highly trained
technicians have decades of experience
installing, maintaining and repairing WOM
equipment and have the capability to be
deployed wherever in the world they are
needed. Service work can cause hours of
downtime and there is no better solution for
minimizing this cost than utilizing WOM’s
in-house service department to quickly and
effectively diagnose and repair any piece of
At our subsea facility, WOM employee testing a repaired Flowhead before it

WOM-manufactured equipment.
goes back to the customer
Repair and Retrofit

To help lower the total cost of ownership of used valves,
WOM provides a comprehensive remanufacturing process
for all major brands of gate valves. “Magnumize” your
existing valve inventory with Magnum Dual-Seal™
components.
This service can provide customers with advanced

Magnum sealing technology:
zero leak, lower torque, longer life of critical
components, upstream and downstream thru-conduit
sealing.
All gate valves that undergo the WOM remanufacturing

process are tested to OEM specifications and delivered
with a full two-year limited warranty.
Magnum Forge and Machine Works
Magnum Forge produces forgings in a variety of configurations to meet
virtually any customer requirement. Magnum Forge maintains strict quality
control procedures that conform to standards set by the industry in which the
product will be used. The plant has the capacity to ensure quick delivery with
MAGNUM FORGE AND MACHINE WORKS competitive pricing.
FORGED PRODUCTS
High Pressure Fittings
• Heat Treatment & 4,700 Gallon (18,000 liter) Quenching Tank Gate Valve Parts
• CNC Machines/Die Sinking Machines • Central Lathe Ball Valve Balls
• Ultrasonic Testing • Magnetic Particle Testing Ram BOP Parts
• Chapry Impact Testing • Chemical Laboratory Annular BOP Parts
• Physical & Metallurgical Laboratory • Open and Closed Dye Forging Wellhead Forgings
• 16 Ton Pneumatic Closed Die Hammer • Bogie & Bofco Furnaces XMas Tree and Choke Forgings
• Heat Treatment Furnaces • Machine Shop Well Testing Forgings
• Cutting Shop • Low & Medium Carbon Steel Bodies for High and Low Pressure
• Alloy Steel • Stainless Steel Valves up to 20,000psi
• Inconel • 17-4PH Power Transmission Parts
• Duplex & Super Duplex (Hubs & Sleeves)
Open Die Forgings
58
Conversion Table
FROM
59
worldwide locations
Worldwide Oilfield Machine, Inc. Worldwide Oilfield Machine Ltd. - UK
Headquarters/ U.S.A 7 St Machar Road Aberdeen
11809 Canemont Street AB24 2UU Scotland, UK
Houston, Texas 77035 USA Phone: +44 (01224) 484400
Phone: +1 (713) 729-9200 Fax: +44 (01224) 489740
Fax: +1 (713) 729-7321
Worldwide Oilfield Machine Pvt. Ltd - India

Worldwide Oilfield Machine, Inc. Gat No. 778, at Post Velu
5800 Cunningham Pune Satara Rd.
Houston, Texas 77041 USA Tal. Bhor, Dist. Pune 412 205. India
Phone: +1 (713) 937-0795 Phone 1: +91-8308210300
Fax: +1 (713) 937-8574 Phone 2: +91-8308215300
Worldwide Oilfield Machine, Inc.

11625 Fairmont St. Worldwide Oilfield Machine, Inc.- Turkmenistan
Houston, Texas 77035 USA Yimpash Business Centre
Phone: +1 (713) 721-5200 Turkmenbashy Shayoly 54
Fax: +1 (713) 721-5205 Office #308 3rd Floor
Ashgabat –Turkmenistan 744000
Phone 1: +99-365 820130
Worldwide Oilfield Machine - Subsea Phone 2: +99-365 309757
11400 Tanner Rd.
Houston, TX 77041
Phone: +1 (713) 937-8323
Fax: +1 (713) 937-8574
60
www.womusa.com
Worldwide Oilfield Machine, M.E. - U.A.E Worldwide Oilfield Machine Asia Pacific Pte. Ltd. - Singapore
Jebel Ali Free Zone (JAFZA) South, 17 Gul Way
Plot# S61302, Near Gate#12, P.O. Box: 32478 Singapore 629194
Dubai (UAE) Phone: +65 6690 1700
Phone: +971-4 81 63 600 Fax: +65 6560 3859
Fax: +971-4 81 63 601 +65 6558 7562
Worldwide Oilfield Machine - Korea

Magnum Technology Center #1012, 481-10, Byucksan Digital Vally-II,
Plot # S61301, Jebel Ali Free zone (South) Gasandong, GumchonGu,
Dubai (UAE) Seoul, Korea 153-803
Phone: +971-4 88 06 911 Phone: +82 2 854 6806
Fax: +971-4 81 63 601
worldwide service Centers
PT Worldwide Oilfield Machine - Indonesia CANADA EGYPT
#11-08 One Pacific Place MEXICO OMAN
Sudirman Central Business District BRAZIL KUWAIT
Jl. Jenderal Sudirman Kav. 52-53, Jakarta 12190
Phone: +65 6690 1792 ARGENTINA MYANMAR
TRINIDAD AND TOBAGO CHINA
NORWAY JAPAN
FRANCE KUALA LUMPUR
ALGERIA AUSTRALIA
61
Terms and Conditions
WORLDWIDE OILFIELD MACHINE INC., USA THIS ORDER IS SUBJECT TO ALL OF THE TERMS AND or accident, or 2.) has been altered or tampered with, or on 3.) which corrective work has been done without WOM’s
CONDITIONS PRINTED HEREOF, WHICH INCLUDE PROVISIONS DISCLAIMING AND EXCLUDING specific written consent. WOM’s sole obligation and Buyer’s exclusive remedy in connection with the Equipment and/
LAIBILITY FOR CONSEQUENTIAL DAMAGES, EACH OF WHICH BUYER AGREES TO BY ACCEPTANCE OF or Services shall be limited, at WOM’s option, to either replacement of Equipment and/or Services conforming to
THIS ORDER. ONLY SUCH TERMS AND CONDITIONS SHALL CONSTITUTE THE AGREEMENT BETWEEN this warranty or credit to Buyer’s account in the invoiced amount of the non-conforming Equipment and/or Services.
THE PARTIES. WOM MAKES NO OTHER WARRANTIES CONCERNING THE EQUIPMENT AND/OR SERVICES. NO OTHER
1. CONTROL OF AGREEMENT: Buyer agrees that this Agreement, and the terms and conditions contained WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY, SUCH AS WARRANTIES OF
herein, shall control the sale of any Equipment and Services from Worldwide Oilfield Machine, Inc (“WOM”). MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. WOM does not recommend
Any additional or different terms which may be contained in Buyer’s purchase order or any other documents and will not assume any responsibility for rebuilding, repairing special plating, coating, welding, or heat-treating done
furnished by Buyer, including outside WOM’s plant by or at the request of Buyer. Products not of WOM’s manufacture and included in WOM’s
but not limited to, inquiries, specifications, purchase orders, acceptances or acknowledgements, shall not control proposal, and special plating, coatings, or heat treatment applied to WOM’s products are not warranted in any way
the sale of Equipment and Services unless accepted in writing by WOM’s Management Committee. by WOM but carry ONLY the manufacturer’s warranty, if any. Any recommendation or suggestion relating to the use
2. PAYMENT: Factory Invoices are issued as of the date of delivery covering deliveries from our stocks and as of of the Equipment and/or Services made by WOM wether in its technical literature or in response to specific inquiry,
the date of shipment covering direct shipments. Buyer will pay without deduction or set-off the fees summarized or otherwise, is based on data believed to be reliable; however, the Equipment and/or Services and information are
on the invoice for the Equipment and Services purchased by Buyer. All invoices are net and due and payable 30 intended for use by Buyers having the requisite skill and know-how in the industry, and therefore it is for Buyer to
days from date of shipment in the lawful currency of the United States of America unless otherwise specifically satisfy itself of the suitability of the Equipment and/or Services for its own particular use and it shall be deemed that
agreed in writing. Past due amounts bear interest at the rate of 1.5% per month (or the highest rate allowed by Buyer has done so, at its sole discretion and risk. Variations in environment or changes in procedures or use may
law, whichever is less) cause unsatisfactory results.
Beginning from the date first due until paid in full. If any time a Buyer (i) fails to take delivery, (ii)exceeds its 10. LIMITATION OF LIABILITY: WOM’s liability on any claim of any kind, including claims based upon WOM’s
credit limit with WOM, (iii) is overdue with payment, (iv) suspends payments, (v) makes arrangements with its negligence, or strict liability for any loss or damage arising out of, connected with, or resulting from the use of the
creditors or otherwise in WOM’s opinion appears to be in financial difficulties or (vi) ceases to trade, then WOM Equipment and/or Services, shall in no case exceed the purchase price allocable to the Equipment and/or Services
may without liability or prejudice to its other rights stop Equipment and Services in transit and defer or cancel or part thereof which gives rise to the claim.
further Equipment and Services under contract with Buyer or require advance payment or satisfactory security UNDER NO CIRCUMSTANCES WILL WOM BE LIABLE FOR CONSEQUENTIAL, INDIRECT, SPECIAL, PUNITIVE,
for payment of such services and no forbearance, course of dealings or prior payment shall affect the rights of OR INCIDENTAL DAMAGES OR LOST PROFITS, WHETHER FORESEEABLE OR UNFORESEEABLE, BASED ON
WOM. The acceptance of any order or specification and terms of payment on all sales and orders is subject to CLAIMS OF BUYER OR ANY OTHER PARTY ARISING OUT OF BREACH OR FAILURE OF EXPRESS OR IMPLIED
approval of WOM’s Credit Department and WOM may at any time decline to make any shipment or delivery or WARRANTY, BREACH OF CONTRACT, MISREPRESENTATION, NEGLIGENCE, STRICT LIABILITY IN TORT,
perform any work except upon receipt of payment or security or upon terms and conditions satisfactory to WOM’s FAILURE OF ANY REMEDY TO ACHIEVE ITS ESSENTIAL PURPOSE, OR OTHERWISE NOT WITHSTANDING
Credit Department. THE FORM (e.g., CONTRACT, TORT, OR OTHERWISE) IN WHICH ANY LEGAL OR EQUITABLE ACTION MAY
3. PRICES. The prices stated herein are based on the prices in effect as of the date hereof. Upon expiration BE BROUGHT. 5 11. INDEMNIFICATION: BUYER RELEASES AND WILL DEFEND, INDEMNIFY AND HOLD WOM
of validity date of quotation, prices are subject to change without notice, in accordance with the prices in effect (AND ITS OFFICERS, DIRECTORS, AGENTS AND EMPLOYEES) (COLLECTIVELY “INDEMNITEES”) HARMLESS
as of the date of shipment. The 2 prices herein apply only to the Order Acknowledgement as stated herein and FROM ANY AND ALL LOSSES, LIABILITIES, SUITS, DAMAGES, CLAIMS, DEMANDS, AND EXPENSES
not to any further orders being placed. If substitute or additional equipment , or repair parts are purchased by (INCLUDING, WITHOUT LIMITATION, REASONABLE ATTORNEYS’ FEES) (“CLAIMS”), WHETHER BASED
Buyer from WOM, the terms and conditions of the contract created upon acceptance of this offer to sell shall be ON CONTRACT OR TORT (INCLUDING STRICT LIABILITY), RESULTING FROM A CLAIM BY A THIRD PARTY
applicable thereto, the same as if such substitute or additional equipment or repair parts had been originally (INCLUDING ANY EMPLOYEE OF BUYER OR GOVERNMENTAL AGENCY) BASED ON ACTIONS BY WOM
purchased hereunder. Any Tax now or herein after imposed by Federal, state, municipal, or other governmental UNDERTAKEN UPON THE INSTRUCTIONS OF BUYER, OR ARISING OUT OF ITS PROVISION OF PRODUCTS
agency thereof and /or any foreign taxing entity, based on or measured by the sale or use of the material, OR SERVICES. THIS INDEMNITY WILL NOT COVER ANY LOSS, LIABILITY, CLAIM AND EXPENSE ARISING
merchandise of services covered here or by the gross receipts from this transaction or any allocated portion OUT OF WOM’S OWN GROSS NEGLIGENCE OR WILLFUL MISCONDUCT. EXPRESS NEGLIGENCE: THE
thereof, or by this gross value of the material, merchandise or services covered hereby, or any similar tax in any INDEMNIFICATION, RELEASE AND ASSUMPTION PROVISIONS PROVIDED FOR IN THIS AGREEMENT SHALL
State where WOM does business, all sales, use excise, and similar taxes which WOM may be required to pay or BE APPLICABLE WHETHER OR NOT THE LOSSES, COSTS, EXPENSES AND DAMAGES IN QUESTION AROSE
collect with respect to goods covered by this Order shall be the account and the responsibility of Buyer, except as SOLELY OR IN PART FROM THE ACTIVE, PASSIVE OR CONCURRENT NEGLIGENCE, STRICT LIABILITY OR
otherwise provided by law. WOM shall not be responsible for freight, transportation, insurance, shipping, demurrage OTHER FAULT OF ANY INDEMNI- FIED PARTY. BUYER AND WOM ACKNOWLEDGE THAT THIS STATEMENT
or similar charges unless agreed upon in writing that is signed by both Buyer and WOM’s authorized representative COMPLIES WITH THE EXPRESS NEGLIGENCE RULE AND IS CONSPICUOUS.
at time of quotation. Any fees related to importing or exporting of components, parts and products shall be paid 12. RECOMMENDATION: No statement or recommendation made or assistance given by WOM or its representatives
for by Buyer, including but not limited to consular fees for legalizing invoices, stamping bills of lading, or other to Buyer or its representatives in connection with the use of any Equipment and/or Services by Buyer shall constitute
documents required by the laws of any country or destination, and any other such fees associated therewith are a waiver by WOM of any of the provisions herein or affect WOM’s liability, as herein defined, or be deemed to provide
not included in quotations or selling prices. warranties additional to those set forth herein.
4. FORCE MAJEURE: WOM shall not be liable for non-performance and/or delay in performance resulting from 13. WAIVER: Waiver by WOM of any breach of any provision herein shall not be considered a waiver of any other or
any governmental law or regulation, now or hereafter in effect, or for delays caused by WOM’s suppliers, or future breach of the same provision or of other provisions.
caused by acts of God, fire, flood, wind, sabotage, strikes or other labor troubles, accidents, necessary repairs to 14. ASSIGNMENT: Buyer may assign this Agreement only pursuant to a merger, acquisition, sale of all or substantially
machinery, adverse weather conditions or other causes beyond WOM’s control, including customs, duties, and/ all assets, corporate reorganization or other similar transaction, provided that the scope of use of any Equipment
or changes in currency exchange rates. In the event of any of the foregoing, WOM shall have the right to allocate and/or Services provided hereunder will not be expanded beyond the business of Buyer and its majority owned
and reschedule production, delivery and/or cancellation of Equipment and/or Services to Buyer as WOM, in its subsidiaries and assignee assumes, and is capable of assuming, all obligations (including financial) of Buyer
sole discretion shall deem fair and practical without liability for any failure of performance, or consequential or hereunder. WOM may assign this Agreement to any successor to WOM’s interests in the subject matter. WOM may
incidental damages which may result. assign its right to payment hereunder or grant a security interesting this Agreement or such payment right to any third
5. DELIVERY: Sales are F.O.B. point of shipment and risk of loss shall pass to Buyer upon delivery of material party. WOM may perform any obligation pursuant to this Agreement using agents and subcontractors.
to carrier unless otherwise expressly stated and agreed to in writing signed by both Buyer and WOM. Within 15. ENGINEERING AND SERVICE. Upon request, WOM will provide engineering and/or technical information
thirty (30) days after receipt of Equipment and/or Services, Buyer shall notify WOM in writing of any claims for regarding its products and their uses. If confidential and/or 6 proprietary materials and/or information is furnished and/
nonconformity, shortages, errors in shipment or errors in charges. Failure to so notify WOM shall constitute or requested, the Buyer will be asked to sign a non-disclosure agreement, before such material and/or information
conclusive evidence that WOM has satisfactorily performed and that Buyer has accepted the Equipment and/or is furnished. Should
Services and waived any right to reject the Equipment and/or Services. Equipment may be returned only upon Buyer refuse to sign the provided non-disclosure agreement, then WOM will provide more general engineering and/
WOM’s prior written 3 authorization. WOM’s liability is limited to replacing non-conforming Equipment or Services or technical information and/or such information that does not contain confidential and/or proprietary information.
or to allow credit to the extent of invoice value of such Equipment and/or Services, at WOM’s option. All material Further, any such information, service or assistance so provided, whether with or without charge, shall be advisory
accepted for credit is subject to WOM’s normal restocking charge. No material will be accepted to credit after one only. In this regard, neither WOM nor Buyer assumes any liability for the acts or omissions of the other party or of
year from date of shipment. Any delivery dates specified by WOM are approximate only and are based on normal third parties. Please note that WOM offers equipment operation manuals in English. However, WOM can offer same
plant operation. WOM shall not be liable for any loss, damage, or expense of any kind, whether arising from operational manuals in other languages for a fee upon request.
delay, transportation, or any other cause whatsoever. WOM shall be given reasonable opportunity and access to 16. MISCELLANEOUS: (a) WOM and Buyer are independent parties. Nothing in this Agreement will be construed to
investigate the merits of any claim made under this Paragraph. make either party an agent, employee, franchisee, joint venturer, or legal representative of the other party. (b) This
6. CANCELLATION: Orders placed by Buyer may not be cancelled except upon WOM’s prior written consent. In Agreement will be governed by and interpreted in accordance with Texas law, excluding its conflict of law principles
the event of cancellation, WOM shall be entitled to recover any and all damages suffered by it by virtue thereof as and both parties consent to the jurisdiction of the federal and state courts of Harris County, Texas, waiving any
allowed by law, including but not limited to, WOM’s costs and other commitments incurred to date of cancellation, objection to forum non conveniens. (c) WOM will be entitled to its reasonable attorneys’ fees in addition to any
WOM’s incidental damages, and the profit WOM would receive from full performance of this contract. other damages and amounts awarded to it in any action to collect unpaid fees owed pursuant to this Agreement. (d)
7. DEFAULT: If Buyer fails to make any payment when due, hereunder or under any other agreement between This Agreement constitutes the complete and entire statement of all terms, conditions, and representations of the
Buyer and WOM, or if the financial responsibility of the Buyer becomes impaired or unsatisfactory in WOM’s agreement between WOM and Buyer with respect to its subject matter and supersedes all prior writings or
judgment, WOM may, without prior notice or demand and without breach of contract, defer shipments, cancel understandings. (e) If any provision of this Agreement is held unenforceable, in whole or in part, such holding will not
the unshipped balance of order, suspend performance of any obligation (including without limitation, repair, affect the validity of the other provisions of this Agreement. Paragraphs 2, 7, 9, 10, 11, 13 and 14 of this Agreement
replacement or investigation obligations under Paragraph 8 herein) and/or take immediate possession of will survive any expiration or termination of this Agreement. (f) No waiver, amendment, or other modification of this
Equipment delivered until the full purchase price of Equipment and/or Services shall be paid by Buyer or, at Agreement will be effective unless in writing and signed by the party against whom enforcement is sought.
WOM’s discretion, until security satisfactory to WOM shall be given by Buyer. Any costs incurred by WOM as
a result of suspending performance or repossession or collection shall be payable by Buyer. WOM may
sell repossessed Equipment with proceeds to be applied to unpaid balance and expenses incurred in sale,
repossession and collection. Buyer shall pay any remaining deficiency. WOM shall have the right at any time to
examine and take possession of Equipment without restrictive action by Buyer.
8. SECURITY INTEREST: WOM hereby reserves a security interest in all of the Equipment until full payment
of the purchase price of the same. Buyer shall execute and deliver such financing statements and other
documents as may be requested by WOM from time to time for the purpose of evidencing the interest of WOM
in the Equipment.
9. WARRANTY: WOM warrants its Equipment and/or Service to be free from defects in material and workmanship,
provided such products are used in the service and within the pressure range for which they were manufactured.
Any claim under this Warranty must be made by Buyer to WOM in writing within thirty (30) days of Buyer’s
discovery of the claimed defect but in no event later than twenty-four (24) months from the date of delivery.
Buyer’s failure to notify WOM of such non-conformance as required herein shall bar Buyer from recovery under
this Warranty This warranty shall not apply to any equipment, which has been 4 1.) subjected to misuse, neglect,
TM
TM
www.womusa.com
Disclaimer. This catalog is published for informational purposes only. All previous catalogs are not valid and should not be used as a reference in any form.
64 Revised 2016

General Catalog 2016

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

General Catalog 2016

Uploaded by

Copyright:

Available Formats

WOM proudly celebrates 35 years of providing the oil & gas industry with meticulously

Houston, Usa ▪ Aberdeen, Uk ▪ Pune, India ▪ Dubai, Uae ▪ Singapore

SERVING THE OIL AND GAS INDUSTRY FOR OVER YEARS!

Ashgabat, Turkmenistan ▪ Jakarta, Indonesia ▪ seoul, south Korea

WOM is committed to comply with the requirements of

The Quality Policy, Business Mission and Company Objectives are

The Magnum Gate Valve incorporates a design which has

Features and Benefits

A T-Slot Gate paired with an independent

Compatible with Elastomeric

Sizes: 1-13/16” through 9” (larger sizes available upon request)

• Working pressure ratings from 2,000 psi-15,000 psi

• Forged body and bonnet for the highest mechanical integrity

• Bi-directional flow design offers versatility and increased

• Grease injection fitting located in bonnet, eliminating body

• Bearing cap grease fitting allows positive bearing lubrication

• Can be equipped with pneumatic or hydraulic actuators

Model WV 200 Gate Valve

• Available is sizes 2-1/16” - 3-1/8”

• Available in working pressure rating of 5,000 psi

• Single piece, floating slab gate reduces deflection and binding at

• Material construction forged body and bonnet

• Metal-to-metal sealing gate/seat, seat/body and body/bonnet

• Low torque requirements to reduce operator fatigue

• Cost efficient gate valve that provides reliable downstream

• Designed, built and tested to API 6A and 17D

• Tested to a water depth of 13,200 feet

• Anti-explosive decompression seals and energized non-elastomeric lip seals

• Metal-to-metal seal (seat to gate)

• Magnum “Dual-Seal” seat design seals upstream and downstream

• Cladding of “all wetted parts” is available

• “T” Slot stem and gate connection

Magnum Subsea Dual-Block 19

• WOM’s pneumatic and hydraulic actuators are manufactured and tested

• Anti-explosive decompression seals and energized non-elastomeric

• Factory preset drift eliminates the need for field adjustments

Hydraulic Fail Safe Actuator

Pneumatic Fail Safe Actuator

• Factory pre-set drift eliminates the need for field

Actuator body completely contains compressed spring

Quick disconnect mechanism allows fast removal without disturbing

Factory preset drift eliminates need for field adjustment

Full bore through-conduit flow in full open position

Magnum “Sure-Seal” mechanism is pressure-energized for

• Available in working pressure ratings from 3,000 psi-10,000 psi

• Features WOM’s patented Magnum Dual Seal™ system

• Thru-Conduit seal eliminates the turbulence experienced in

• Skirted seat assembly prevents contaminants from entering the

• Body cavity is exposed to line pressure only during valve

• Better lubricant retention, less exposure to line contaminants and

Model 600 Mud Valve

Features and Benefits

• Available in working pressures from 5,000 psi and 7,500 psi

• Floating slab gate design

• Heavy duty roller bearings

• Available with threaded, welded and flanged end connections

22 • Replaceable stem packing

• Available in sizes ranging from 1-13/16” - 7-1/16”

• Available in working pressures from 2,000 psi to 20,000 psi

• Ideal for single point protection where control pressure is not

• Self-operating system which uses line pressure as control pressure

• High and low pressure pilots sense line pressure continuously.

• Centralized stem threads and T-nut combined with T-slot gate

• Colmonoy 4, 5 & 75, Tungsten Carbide, Stellite and other HF