Technical data sheet PRCA-S2-T

Rotary actuator for butterfly valves

• Nominal torque 160 Nm
• Nominal voltage AC 24...240 V /
DC 24...125 V
• Control Open-close, 3-point
• with 2 integrated auxiliary switches

Technical data
Electrical data Nominal voltage AC 24...240 V / DC 24...125 V
Nominal voltage frequency 50/60 Hz
Nominal voltage range AC 19.2...264 V / DC 19.2...137.5 V
Power consumption in operation 20 W
Power consumption in rest position 6 W
Power consumption for wire sizing with 24 V 20 VA / with 230 V 52 VA
Auxiliary switch 2 x SPDT, 1 x 10° / 1 x 0...90° (ex works 85°)
Switching capacity auxiliary switch 1 mA...3 (0.5 inductive) A, AC 250 V
Connection supply / control Terminals 2.5 mm²
Connection auxiliary switch Terminals 2.5 mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor 160 Nm
Manual override with hand crank, can be fixed in any position
Running time motor 35 s / 90°
Motor running time variable 30...120 s
Sound power level motor 68 dB(A)
Position indication Mechanically (integrated)
Safety Protection class IEC/EN II reinforced insulation
Protection class UL II reinforced insulation
Protection class auxiliary switch IEC/EN II reinforced insulation
Degree of protection IEC/EN IP66 + IP67
EMC CE according to 2014/30/EU
Low voltage directive CE according to 2014/35/EU
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Certification UL cULus according to UL 60730-1A, UL 60730-2-
14 and CAN/CSA E60730-1:02
Mode of operation Type 1
Rated impulse voltage supply 4 kV
Rated impulse voltage auxiliary switch 2.5 kV
Control pollution degree 3
Ambient temperature -30...50 °C
Non-operating temperature -40...80 °C
Ambient humidity 95% r.h., non-condensing
Maintenance Maintenance-free
Mechanical data Connection flange F07
Weight Weight 5.8 kg

Safety notes
• This device has been designed for use in stationary heating, ventilation and air

! conditioning systems and must not be used outside the specified field of application,
especially in aircraft or in any other airborne means of transport.
• Caution: Power supply voltage!
• Only authorised specialists may carry out installation. All applicable legal or
institutional installation regulations must be complied during installation.
• Apart from the connection box, the device may only be opened at the manufacturer’s
site. It does not contain any parts that can be replaced or repaired by the user.

www.belimo.eu PRCA-S2-T • en-gb • 2016-10-06 • subject to changes 1

 Rotary actuator, Open-close, 3-point, AC 24...240 V /
PRCA-S2-T DC 24...125 V, 160 Nm, Running time motor 35 s

Safety notes
• The device contains electrical and electronic components and must not be disposed
of as household refuse. All locally valid regulations and requirements must be
observed.

Product features
Fields of application The actuator is particularly suitable for utilisation in outdoor applications and is
protected against the following weather conditions:
- UV radiation
- dirt / dust
- rain / snow
- Humidity
Parameterisable actuators The factory settings cover the most common applications. Single parameters can be
modified with the ZTH EU or the Belimo Assistant App.
The Belimo Assistant App simplifies commissioning and parameterisation via Near
Field Communication (NFC). Moreover, it provides a variety of diagnostic options.
Simple direct mounting Simple direct mounting on the butterfly valve. The mounting orientation in relation to
the butterfly valve can be selected in 90° (angle) increments.
Manual override The valve can be manually operated using a hand crank. Unlocking is carried out
manually by removing the hand crank.
Internal heating An internal heater prevents condensation buildup.
Thanks to the integrated temperature and humidity sensor the built-in heater
automatically switches on.
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops
when the end stop is reached.
Combination valve/actuator For valves with the following mechanical specifications in accordance with ISO 5211
F07:
- Square stem head SW = 17 mm for form-fit coupling of the rotary actuator.
- Hole circle d = 70 mm
Flexible signalization The actuator has one auxiliary switch with a fixed setting (10°) and one adjustable
auxiliary switch (0...90°).

Accessories

Description Type
Mechanical accessories Position indicator and tappet shaft PR - F07, square, SW 17 ZPR01
Tappet shaft PR - F07, square, SW 17 ZPR02
Position indicator and tappet shaft PR - F05, square, SW 14 ZPR03
Retrofit tappet shaft PR - F07, flat head, SW 17 ZPR05
Retrofit tappet shaft PR - F07, square, SW 14 ZPR06
Retrofit tappet shaft PR - F07, square, SW 17 ZPR08
Retrofit tappet shaft PR - F07, flat head, SW 14 ZPR09
Retrofit tappet shaft PR - F05, square, SW 14 ZPR10
Retrofit tappet shaft PR - F07, square, SW 18 ZPR11
Retrofit tappet shaft PR - F07, square, SW 16 ZPR12
Description Type
Service Tools Service tool for parametrisable and communicative Belimo actuators / ZTH EU
VAV controller and HVAC performance devices
Smartphone Service Tool for easy commissioning, parameterising and Belimo Assistant
maintenance App

2 PRCA-S2-T • en-gb • 2016-10-06 • subject to changes www.belimo.eu

 Rotary actuator, Open-close, 3-point, AC 24...240 V /
PRCA-S2-T DC 24...125 V, 160 Nm, Running time motor 35 s

Electrical installation

Notes • Caution: Power supply voltage!

! • Parallel connection of other actuators possible. Observe the performance data.
• The main power supply for the actuator and for the auxiliary switches shall be
from the same phase.

Wiring diagrams

AC 24...240 V / DC 24...125 V, Open-close, Auxiliary switches

230 V + 230 V N
T L
~ 230 V + 230 V N
T L
~
24 V + 24 V – + 24 V + 24 V – +
230 V + 24 V 230 V + 24 V
24 V + 230 V 24 V + 230 V

S1 S2 S3 S4 S5 S6 N L Y1 Y2 N S1 S2 S3 S4 S5 S6 N L Y1 Y2 N

A 10% B 0 ... 100% Y1 Y2 A 10% B 0 ... 100% Y1 Y2

AC 24...240 V / DC 24...125 V, 3-point, Auxiliary switches

230 V + 230 V N
T L
~
24 V + 24 V – +
230 V + 24 V
24 V + 230 V 0

S1 S2 S3 S4 S5 S6 N L Y1 Y2 N

A 10% B 0 ... 100% Y1 Y2

Operating controls and indicators

Auxiliary switch settings
S2 S3

! Note Perform settings on the actuator only in deenergised state.

S5 S6 S5 S6

A 10° S1 S4 S4
S2 S3
3
S5 S6 S5 S6

S4 S4

o
1 Gear disengagement
pe

Opening the manual override cover and adjusting the hand crank.
Manual override is possible.
2 Manual override control
2
o Turn the hand crank until the desired switching position A is indicated and then remove the
pe

n
crank.
1
3 Auxiliary Switch
Opening the auxiliary switch adjustment cover and adjusting the hand crank.
Turn the crank until the arrow points to the vertical line
4 Terminals
S1 S2 S3 S4 S5 S6
Connect continuity tester to S4 + S5 or to S4 + S6.
4 If the auxiliary switch should switch in the opposite direction, rotate the hand crank by 180°.

www.belimo.eu PRCA-S2-T • en-gb • 2016-10-06 • subject to changes 3

 Rotary actuator, Open-close, 3-point, AC 24...240 V /
PRCA-S2-T DC 24...125 V, 160 Nm, Running time motor 35 s

Dimensions [mm]
Dimensional drawings

>100
137
223
60 259

pe
o
n

202
pe
o
n

319

Further documentation
• Overview Valve-actuator combinations
• Data sheets for butterfly valves
• Installation instructions for actuators and/or butterfly valves
• General notes for project planning

4 PRCA-S2-T • en-gb • 2016-10-06 • subject to changes www.belimo.eu