Professional Documents
Culture Documents
Cost Accounting
Cost Accounting
Cost Accounting
Notes
1
INDEX
Sr. Name of the Chapter Page
No. No.
1 Cost Sheet 03 - 10
1 Reconciliation of Cost and Financial Accounts 11 – 12
2 Material Cost 13 – 15
3 Labour Cost 16 – 17
4 Overheads 18 – 19
5 Process Costing 20 – 26
6 Contract Costing 27 – 35
7 Marginal Costing 36 – 40
8 Standard Costing 41 – 44
9 Cost Control Accounts 45 – 53
(Non-Integrated Accounting System)
2
COST SHEET
Q.1. From the books of accounts of M/s. Avinash Enterprises, the following details have been
extracted for the Quarter ending 31-03-2014.
Particulars Rs.
1. The manager‟s time is shared between the factory and the office in the ratio of
20:80.
2. Carriage outwards include Rs.7500 being carriage inwards on plant &
machinery.
3. Selling price is 120% of the cost price
From the above details prepare detailed cost sheet for the quarter ending 31-03-
2014 and ascertained the sales.
Q.2. The following particulars have been extracted from the books of Shri Gautam
Industries Ltd. for the year 2017.
Particulars Rs.
Q.4. From the following information, prepared detailed cost statement for the year
ended 31-3-2014.
Particulars Rs.
Other Information:
1. Closing stock of finished goods to be valued at cost of production.
2. Profit desired on sales is 20%.
3. Number of units sold during the year was 25000.
Prepare Cost Sheet showing the various elements of cost both in total and per unit
and also find out the total profit and per unit profit for the year ended 31st March,
2014.
Q.6. The State Government grained licence to Sweet Sugar Ltd. To manufacture and sell
sugar with a stipulation that 40% of the output should be sold to the State
Government at a controlled price of Rs.3,000 per ton and the balance Output can be
sold in the open market at any price. Following are the details of Sweet Sugar Ltd.
for the year ended 31st March, 2014. During the year 3,600 tons Sugarcane was
consumed @ Rs.1,000 per ton. Direct labour amounted to Rs.825 per ton of sugar
produced. The details of other expenditure are as follows:-
Particulars Rs.
6
Factory Rent and Insurance 3,54,760
Machinery purchased 4,25,560 98,847
Machinery repairs 3,37,650
Commission on Sales 2,19,588
Factory Salaries 1,54,090
Carriage Outward 1,94,450
Packing Expenses 1,65,895
Bank Interest 2,61,880
Factory Electricity 1,06,850
Delivery Van Expenses 3,80,125
Coal Consumed 2,49,600
Depreciation on Machinery 2,04,180
Depreciation on Computer 1,57,360
Depreciation on Delivery Van 1,89,325
Office Salaries 1,13,000
Printing and Stationery
During the year 2,400 tons of sugar was produced. The Company‟s Profit target for
the year, for fixing the open market selling price on the basis of cost sheet, is 10%
of its average paid-up Capital of Rs.1, 42, 56,000. Prepare cost sheet and find
various components of total cost and per unit cost and suggest the Selling Price for
Open-Market.
Q.7. Prepare a cost sheet showing the total and per tonne cost of paper manufactured by
Times Paper Mills Ltd. for the month of March, 2014. There were 26 working days in
the month. Also find the profit earned by the company. The details are as under:-
Direct Raw Materials: Paper pulp : 6,000 tons @ Rs.900 tonne.
Direct Labour:-
280 Skilled workmen : Rs.250 per day
300 Semiskilled workmen : Rs.150 per day
470 Unskilled workmen : Rs.100 per day
Direct Expenses:-
Special equipments hire charges : Rs.12, 000 per day
Special dyes : Rs.250 per tonne of total raw material input
Work overheads : Variable : @ 50% of direct wages
: Fixed : Rs.2, 70,000 p.m.
Administration overheads : @ 12% of works cost
Selling and distribution overheads : Rs.80 per tonne sold.
Opening stock of paper : 500 tonnes valued @ Rs.2,501.60 per ton
Closing stock of paper : 300 tonnes valued at cost of production.
The paper is sold @ Rs.3, 000 per tonne.
Q.8. Sagar manufacturing company gives you the following particulars for the year 2012.
Production and sales during the year was 20,000 units.
Particulars Rs. Particulars Rs.
The company has worked to its maximum capacity of 20,000 units during the year
2012. The management has decided to increase production capacity to 30,000 units
for the year 2013 and it is estimated that:
1. There will be all round rise in all variable expenditure by 10%.
2. There will be increase of 20% in all fixed overheads.
3. There will be no need to change the selling price for the year 2013. Prepare
Cost Sheet for the year 2012 with cost per unit column and also prepare
estimated Cost Sheet for the year 2013 with cost per unit column.
Q.9. Super Vision Company furnishes you with the following information about its 1000
TV sets manufactured and sold during the year:
Particulars Rs. Particulars Rs.
9
8. Selling price per unit for sharada Pen was Rs.250 and Viveka Pen was Rs.125
respectively.
You are required to prepare a statement showing cost and profit in total as well
as per unit for Sharada Pen and Viveka Pen.
Q.14. From the following information, prepare a cost sheet for the month of December,
2014.
Particulars Rs.
10
RECONCILIATION OF COST AND FINANCIAL
ACCOUNTS
Q.1. From the following particulars, prepare Reconciliation Statement and Ascertain Costing
Profit/Loss. Net Profit as per financial P & L A/c. Rs.50,000, Opening Stock was overvalued
by Rs.2,000 in Cost Accounts as compared to financial accounts. Administrative overheads
charged in Financial Books Rs.20,000 but recovered in Cost Rs.40,000.
Income Tax Provision Rs.1,200.
Notional Salary of Proprietor in Cost Rs.20,000.
Interest Received Rs.12,000.
Closing Stock as per financial books Rs.16,200.
Whereas in Cost books it was Rs.19,000.
Q.2. From the following, prepare Reconciliation Statement of M/s. XYZ and Company as on 30-6-
2014:
(1) Net Profit as per Financial Accounts Rs.40,340.
(2) Income Tax Provision made Rs.30,000.
(3) Materials Purchased of 5,000 units were recorded in cost at standard cost Rs.24 per unit
whereas in Financial it was recorded at actual cost Rs.22 per unit.
(4) Old debts recorded Rs.20,500.
(5) Loss on sale of furniture was Rs.4,120.
Q.3. From the following information you are required to prepare a statement reconciling the
results of Cost Books:
Particulars Rs.
Net Profit as per Financial Books 51,052
Works overheads under recovery in cost book 1,001
Depreciation charged in Financial Books 13,000
Depreciation charged in Cost Book 14,326
Obsolescence loss charged in Financial Books Only 2,021
Income-tax provided in Financial Books only 2,626
Interest received but not recorded in Cost Book 3,031
Bank interest debited in Financial Books only 292
Q.4. Following is the summarized Profit and Loss Account of XYZ Industries for the year ended
31-03-2014.
Profit and Loss Account for the year ended 31st March 2014
Particulars Rs. Particulars Rs.
To Materials consumed 2,00,000 By Sales (12,000 units) 4,80,000
To Wages 75,400 By Closing Stock (Finished
To Factory Expenses 52,400 54,600 Goods 3000 units) 66,000
Add: Outstanding 2,200 52,500 By Interest on Securities 17,000
To Administrative Overheads By Profit on Sale of Assets 1,20,000
To Selling and Distribution
Overheads 96,000
To Interest on Loans 14,000
To Income Tax 7,500
To Net Profit 1,83,000
6,83,000 6,83,000
The cost accounting record for the above period showed the following:
(a) Material consumed @ Rs.10 per unit produced.
11
(b) Direct Wages @ Rs.6 per unit produced.
(c) Factory overheads were absorbed @ 25% of Prime Cost.
(d) Administrative overheads were absorbed @ Rs.5 per unit produced.
(e) Selling and Distribution overheads were absorbed @ Rs.7 per unit sold.
You are required to prepare the detailed Cost Sheet for the year ended 31-03-2014 and a
Statement of Reconciliation.
Q.5. RST Ltd. has furnished the following information from the financial books for the ended 31 st
March, 2012.
Dr. Trading and Profit and Loss A/c Cr.
Particulars Rs. Particulars Rs.
To Opening Stock 2,50,000 By Sales (47,500 units) 59,85,000
(Finished goods 2500 units) By Closing Stock 5,00,000
To Raw Materials 20,80,000 (Finished Goods 5000 units)
To Direct Wages 15,15,000 By Commission Received 35,000
To Factory Expenses 10,18,000 By Bad Debts Recovered 12,000
To Office and Administrative By Net Loss 36,000
Expenses 8,45,000
To Selling and Distribution
Expenses 7,00,000
To Goodwill w/off 60,000
To Loss on Sale of Investments 1,00,000
65,68,000 65,68,000
The following information is revealed form the cost records for year ended 31st March, 2012:
(a) Raw material consumption is Rs.40 per unit of Production.
(b) Direct wages are 70% of Direct Materials.
(c) Factory overheads are recovered @ 50% of Direct Materials.
(d) Administrative overheads are taken @ 20% of Works cost.
(e) Selling and Distribution overheads are recovered Rs.15 per unit.
(f) Opening stock of Finished goods is valued at Rs.101.80 per unit.
(g) Closing stock of Finished goods is to be valued at cost of Production.
(h) Selling price is recorded at Rs.125 per unit.
Prepare:
(i) Detailed Cost Statement showing total cost, per unit cost and profit.
(ii) Statement of Reconciliation.
12
MATERIAL COST
Q.1. Keep stock record on FIFO, and Weighted Average basis from the following transactions:
Date Units Rate Per Date Units Rate Per
Unit (Rs.) Unit (Rs.)
Purchases: March 2014 Sales: March 2014
01 500 18 02 200 22
04 700 20 07 500 25
09 900 18 11 400 21
15 300 25 18 800 28
25 200 20 27 500 25
31 500 25
Find out cost of goods sold and the profit.
Q.2. M/s Desai & Co. a trade of Plastic Toys had 12,000 toys valued at Rs.3 per toy. His purchases
and sales during first six months ending 31st December, 2013 were as under:
On 22nd July, 2013 Sales 5,000 Toys @ Rs.20 each
rd
On 23 July, 2013 Purchased (Carriage Inward Rs.1,000) 10,000 Toys @ Rs.15 each
On 25th October 2013 Sales 8,000 Toys @ Rs.24 each
On 26th October 2013 Purchased (Carriage Inward Rs.1,200) 12,000 Toys @ Rs.18 each
On 31st December 2013 Sales 13,000 Toys @ Rs.29 each
You are required to ascertain:
Cost of stock on hand as on 31st Dec.2013 under each of the following methods:
(1) FIFO, (2) Weighted Average
Q.3. The following is a summary of the receipts and issue of materials in a factory during January.
January
1 Opening balances 500 units @ Rs.25 per unit
3 Issue 70 units
4 Issue 100 units
8 Issue 80 units
13 Received from supplier 200 units @ Rs.24.50 per unit
14 Returned to store 15 units @ 24 per unit
16 Issue 180 units
Work out on the basis of First-in-First-out. On the 15th there was a shortage of five units.
Q.4. Prepare a Stores Ledger Account from the following information adopting FIFO method of
pricing of issues of materials.
March 2012 1 Opening Balance 500 tonnes @ Rs.200
3 Issue 70 tonnes
4 Issue 100 tonnes
5 Issue 80 tonnes
13 Received from suppliers 200 tonnes @ Rs.190
14 Returned from Department A 15 tonnes
16 Issued 180 tonnes
20 Received from suppliers 240 tonnes @ Rs.195
24 Issue 300 tonnes
25 Received from suppliers 320 tonnes @ Rs.200
26 Issue 115 tonnes
27 Returned from Department B 35 tonnes
28 Received from suppliers 100 tonnes @ Rs.200
13
Q.5. From the following particulars find out the Economic Order Quantity:
(i) Annual Demand 12,000 units
(ii) Ordering cost Rs.90 per order
(iii) Inventory carrying cost per annum Rs.15
Q.7. The Purchase Manager of an organization has collected the following data for one of the A
class items.
Interest of the locked up capital 20%
Order processing cost (Rs.) for each order Rs.100
Inspection cost per lot Rs.50
Follow up cost for each order Rs.80
Pilferage while holding inventory 5%
Other holding cost 15%
Other procurement cost for each order Rs.170
Annual Demand 1,000 units
Cost per item Rs.10
What should be the EOQ?
Q.8. A company manufactures a product from a raw material, which is purchased at Rs.60 per kg.
The company incurs a handling cost of Rs.360 plus freight of Rs.390 per order. The
incremental carrying cost of inventory of raw material is Rs.0.50 per kg per month. In
additional, the cost of working capital finance on the investment in inventory of raw material
is Rs.9 per kg per annum. The annual production of the product is 1,00,000 units and 2.5
units are obtained from one kg of raw material.
Calculate the economic order quantity of raw materials.
Q.10. X Ltd. manufactures a special product „ZED‟ and provides the following information:
Demand of ZED is 1,000 units per month.
Semi-annual carrying cost – 6%
Raw material required per unit to finished product – 2 kg
Ordering cost per order – Rs.90
Purchase price of input unit – Rs.25 per kg
Required: Calculate (a) Economic order quantity and (b) Total Annual Carrying and
Ordering Cost at that quantity.
Q.11. ABC Co. buys a lot of 125 boxes which is a three month supply. The cost per box Rs.125 and
ordering cost is Rs.250 per order. The inventory carrying cost is estimated at 20% of unit
value per annum.
14
You are required to ascertain:
(i) The total annual cost of existing inventory policy.
(ii) How much money would be saved by employing economic order quantity?
Q.12. KL Limited produces product „M‟ which has a quarterly demand of 8,000 units. The product
requires 3 kgs quantity of material „X‟ for every finished unit of product. The other
information are follows:
Cost of material „X‟: Rs.20 per kg
Cost of placing an order: Rs.1,000 per order
Carrying cost: 15% per annum of average inventory
Required:
(i) Calculate the Economic Order Quantity for material „X‟.
(ii) Should the company accept an offer of 2 percent discount by the supplier, if he wants to
supply the annual requirement of material „X‟ in 4 equal quarterly installments?
Q.13. The purchase Department of your organization has received an offer of quantity discounts on
its order of materials as under:
Price per tonne (Rs.) Tonnes
1,400 less than 500
1,380 500 and less than 1,000
1,360 1,000 and less than 2,000
1,340 2,000 and less than 3,000
1,320 3.000 and above
The annual requirement of the material is 5,000 tonnes. The delivery cost per order is
Rs.1,200 and the annual stock holding cost is estimated at 20 percent of the average
inventory.
The purchase Department wants you to consider the following purchase options and advise
which among them will be the most economical ordering quantity, presenting the relevant
information in a tabular form.
The purchase quantity options to be considered are 400 tonnes, 500 tonnes, 1000 tonnes,
2000 tonnes and 3,000 tonnes.
Q.14. The following data are available in respect of material X for the year ended 31st March, 2015:
Opening Stock Rs. 90,000
Purchases during the year Rs.2,70,000
Closing Stock Rs.1,10,000
Calculate:
(1) The Inventory Ratio
(2) The number of days for which the average inventory is held.
Q.16. From the following data for the year ended 31st December, 2014, calculate the inventory
turnover ratio of two items and put forward your comments on them:
Particulars Material X (Rs.) Material Y (Rs.)
Opening Stock (1st January, 2014) 20,000 18,000
Purchases during the year 1,04,000 54,000
Closing Stock (31st December, 2014) 12,000 22,000
15
LABOUR COST
Q.1. Standard production @ 20 units per hour, general wage rate Rs.2.00 per hour, wages rate if
work executed below standard: 80% of general rate on execution of work equal to standard
120% of, general rate; production in 8 hrs of one day by Mr. A:150 units and by Mr. B:200
units. Compute total remuneration payable to Mr. A and Mr. B under the Taylor plan.
Q.2. Calculate the earnings of workers A and B under Straight Piece Rate system and Taylor‟s
Differential Piece Rate system from the following particulars:-
Normal rate per hour – Rs.1.80
Standard time per unit – 20 seconds
Differential to be applied are:
80% of the piece rate below the standard;
120% of the piece rate above standard.
A produced 1,300 units per day of 8 hours; and B 1,500 units per day of 8 hours.
Q.6. Calculate bonus payable under Rowan plan where time allowed is 24 hours, time taken is 18
hours and time rate is Rs.20 per hr.
Q.7. A worker produced 200 units in a week‟s time. The guaranteed weekly wage payment for 45
hours is Rs.81. The expected time to produce one unit is 15 minutes which is raised further
by 20% under the incentive scheme. What will be the earnings per hour of that worker
under Halsey (50% sharing) and Rowan bonus schemes?
Q.8. Calculate the earnings of a worker under (i) Rowan Plan (ii) Halsey Plan from the following
particulars:
(1) Hourly rate of wages guaranteed 0.50 pause per hour.
(2) Standard time for producing dozen articles – 3 hours.
(3) Actual time taken by the worker to produce 20 dozen articles – 48 hours.
16
Q.9. A worker takes 6 hours to complete a job under a scheme of payment by results. The
standard time allowed for the job is 9 hours. His wage rate is Rs.1.50 per hours. Material cost
of the job is Rs.16 and the overheads are recovered at 150% of the total direct wages.
Calculate the factory cost of job under (a) Rowan and (b) Halsey systems of Incentive.
Q.10. Calculate normal overtime and total wages payable to a worker from the particulars given
below:
Days Hours Worked
Monday 10
Tuesday 9
Wednesday 8
Thursday 12
Friday 9
Saturday 4
Normal working hours = 8 per day
Normal rate = Rs.50 per day
Overtime rate = up to 9 hours per day-single rate; beyond 9 hours a day-double rate.
Q.11. From the following data prepare a statement showing the cost per day of 8 hours of
engaging a particular type of labour:
(a) Monthly salary (basic + dearness allowance) – Rs.200
(b) Leave salary payable to the workman – 5% of salary
(c) Employer‟s contribution to P.F. – 8% of salary [item (a) and (b)]
(d) Employer‟s contribution to State Insurance – 2½% of salary (item a + b)
(e) Expenditure on amenities – Rs.17.95 per head per month
(f) No. of working hours in a month – 200
Q.12. „A‟, an employee of XYZ Co. gets the following emoluments and benefits:
(a) Salary Rs.2,500 per month
(b) Dearness Allowance Rs.5,250 per month
(c) Employers‟ contribution to Provident Fund 8% of Salary and D.A.
E.S.I. 4% of Salary and D.A.
(d) Bonus 20% of Salary and D.A.
(e) Other allowances Rs.27,250 per annum
A works for 2,400 hours per annum, out of which 400 hours are non-productive but treated as
normal idle time. You are requested to find out the Effective hourly cost of „A‟.
17
OVERHEADS
Q.1. A factory has 3 production departments (P1, P2, P3) and 2 service departments (S1 & S2).
The following overheads and other information are extracted from the books for the month
of January 2014.
Expense Amount (Rs.) Expense Amount (Rs.)
Rent 6,000 Supervision 9,000
Repair 3,600 Fire Insurance for Stock 3,000
Depreciation 2,700 ESI contribution 900
Lighting 600 Power 5,400
Particulars P1 P2 P3 S1 S2
Area sq. ft. 400 300 270 150 80
No. of workers 54 48 36 24 18
Wages 18,000 15,000 12,000 9,000 -
Value of plant 72,000 54,000 48,000 6,000 6,000
Stock Value 45,000 27,000 18,000 - -
Horse power of plant 600 400 300 150 50
Allocate or apportion the overheads among the various departments on suitable basis.
Q.2. The Modern Company is divided into departments: A, B, and C are production departments
and D is service department. The actual costs for a period are as follows:
Particulars Rs. Particulars Rs.
Rent 10,000 Fire insurance (Stock) 5,000
Repairs to plant 6,000 Power 9,000
Depreciation of plant 4,500 Light 1,000
Supervision 15,000 Employer‟s Insurance Liability 1,500
The following information are available in respect of the four departments:
Particulars Departments
A B C D
Area (sq. mtr.) 1,500 1,100 900 500
Number of employees 20 15 10 15
Horsepower of machines 800 500 200 -
Total wages (Rs.) 60,000 40,000 30,000 20,000
Value of plant (Rs.) 2,40,000 1,80,000 1,20,000 60,000
Value of Stock (Rs.) 1,50,000 90,000 60,000 -
Light points (Nos.) 40 30 20 10
Apportion the costs of the various departments by the most equitable method.
Q.3. The following cost information for a period is available for a small engineering unit:
(a) Allocated expenditure
Total Allocated
(Rs.) Production Departments Service Departments
Machine Assembly General Stores
Shop Service
Indirect Wages 29,300 8,000 6,000 4,000 11,300
Stores consumed 6,700 2,200 1,700 1,100 1,700
Supervisory Salaries 14,000 - - 14,000 -
Other Salaries 10,000 - - 10,000 -
(b) Expenditure to be apportioned
Power and Fuel 15,000
Rent 15,000
18
Insurance 3,000
Depreciation 1,00,000
(c) Additional Information available
Floor Area H.P. No. of Investment
(Sq. ft.) Hrs. Employees (Rs.)
Machine Shop 2,000 3,500 30 6,40,000
Assembly 1,000 500 15 2,00,000
General Plant 500 - 5 10,000
Stores 1,500 1,000 10 1,50,000
You are required to prepare an overhead primary distribution statement in detail.
Q.4. In an engineering factory particulars have been extracted for the year ended 31-12-2013:
Particulars Production Dept. Service Dept.
A B C X Y
Direct Wages (Rs.) 30,000 45,000 60,000 15,000 30,000
Direct Material (Rs.) 15,000 30,000 30,000 22,500 22,500
Staff number 1,500 2,250 2,250 750 750
Electricity 6,000 4,500 3,000 1,500 1,500
Asset Value (Rs.) 60,000 40,000 30,000 10,000 10,000
Light Points 10 16 4 6 4
Area (Square meters) 150 250 50 50 50
The expenses for the period were as follows:
Particulars Rs. Particulars Rs.
Power 1,100 Depreciation 30,000
Lighting 200 Repairs 6,000
Stores Overheads 800 General overheads 12,000
Welfare to Staff 3,000 Rent and Taxes 550
Apportion the expenses of service department Y according to direct wages and those of
service department X in the ratio 5 : 3 : 2 to the production departments.
You are required to prepare an Overheads Distribution Summary.
Q.5. Radha Enterprises has three production departments A, B and C and one service
department S.
The following figures are available for one month of 25 working days of 8 hours each day.
All departments worked all these days with full attendance.
Expenses Total Service Production Department
(Rs.) Dept. (Rs.) A (Rs.) B (Rs.) C (Rs.)
Power and Lighting 1,100 300 200 250 350
Supervisor‟s Salary 1,500 - - - -
Rent 600 - - - -
Canteen Expenses 500 - - - -
Others 1,100 140 210 470 280
4,800
The following additional information is available:
Particulars Service Production Department
Dept. A B C
Supervisor‟s Salary 20% 20% 30% 30%
Floor Area in sq. feet 800 700 900 600
Number of workers 20 30 30 20
Service rendered by service department to
production department 20% 30% 50%
You are required to calculate the labour hour rate of each of the department A, B and C.
19
PROCESS COSTING
Q.1. A product passes through 3 distinct processes to completion. During December 2013, 500
units were produced. The cost books show the following information:
Particulars Process A Process B Process C
Materials 3,000 1,500 1,000
Labour 2,500 2,000 1,500
Direct Expenses 500 2,160 905
The indirect expenses for the period were Rs. 1,400 to be apportioned on the basis of
Labour Cost. The residue of Process B was sold for Rs. 145. Residue of Process C was sold for
Rs. 166. Prepare the Process Accounts showing the cost of each process and the cost of
production of the finished product per unit.
Q.2. Varun Motors Ltd., manufactures a component of a motor car which passes through three
processes. The normal waste for process 1 is 20% of the units introduced. The wastage
(normal and abnormal) is sold at Rs. 50 per unit. 2,000 units were introduced in this process
at Rs. 100 per unit. The additional expenditure incurred was Rs.60,000.
Prepare Accounts showing the cost of production per unit under the following conditions:
(a) If the production is 1,600 units. (b) If the production is 1,500 units. (c) If the production is
1,800 units.
Show your calculations relating to the cost of production separately.
Q.3. The product of a company passes through three distinct processes to completion. These
processes are known as X, Y and Z. From the past experience, it is ascertained that wastage
is incurred in each process as under: Process X- 2%, Process Y – 4%, Process Z - 10%.
The wastage at each process processes scrap value. The wastage of processes X and Y is
sold at Rs. 2.50 per unit, and that of process Z at Rs. 5.00 per unit. The output of each process
passes immediately to the next process and finished units are transferred from Process Z
into stock. The following information is obtained.
Particulars X (Rs.) Y (Rs.) Z (Rs.)
Material 2,70,000 2,60,000 1,20,000
Wages 4,30,000 2,40,000 1,30,000
Direct Expenses 1,37,500 1,45,000 1,80,000
50,000 units were put in process X at a cost of Rs. 10 per unit. The output of each process is
as follows:
Process X – 48,750 units, Process Y – 47,000 units, Process Z – 42,000 units.
There is no stock of work in progress in any process. Prepare the process accounts,
abnormal gain account and abnormal loss account.
Q.4. A product passes through three processes. The following cost data have been extracted
from the books of a manufacturing company.
Particulars Total (Rs.) Process I Process II Process III
Materials 1,50,840 52,000 39,600 59,240
Direct Wages 1,80,000 40,000 60,000 80,000
Production Overhead 1,80,000 - - -
10,000 units at Rs. 6/- each were introduced into Process I. There was no stock of material or
work-in-progress at the beginning or at the end. The output of each process passes directly
to the next process and finally to the finished stock. Production overhead is recovered at
100% of Direct wages.
The following additional data are obtained:
Process Output Unit Percentage of Normal Loss to Input Value of scrap per unit
I 9,500 5% 4
20
II 8,400 10% 8
III 7,500 15% 10
Prepare Process Accounts and Abnormal Loss Account / Gain Account and Normal Loss
Account.
Q.6. Product A is manufactured after it passes through three distinct processes. The following
information is obtained from the records of a company for the year ended 31st December,
2013.
Particulars Process I (Rs.) Process II (Rs.) Process III (Rs.)
Direct Materials 2,500 2,000 3,000
Direct Wages 2,000 3,000 4,000
Product overheads are Rs. 9,000, 10,000 units at Rs. 5 each were introduced to Process I.
There was no stock of materials or work in progress at the beginning and at the end of the
year. The output of each process passes direct to the next process and finally to the finished
stock A/c. Production overheads are recovered on 100% of direct wages. The following
additional data is available:
Particulars Output during Percentage of normal Value of scrap per
the week loss to input unit (Rs.)
Process I 950 5% 3
Process II 840 10% 5
Process III 750 15% 5
Prepare Process Cost Abnormal Gain or Loss Accounts for the year ended 31 st December,
2013.
21
There is no stock or work-in-progress in any process. You are required to prepare process
Account.
Q.8. A product of a manufacturing concern passes two processes viz. A and B and then to finished
stock. The following figures have been taken from it‟s books for the year ended 31 st March,
2013.
Particulars Process A Product B
Raw Materials introduced in Process (Units) 10,000 700
Cost of Raw Materials introduced (per unit) (Rs.) 125 200
Wage (Rs.) 2,80,000 1,00,000
Machine Expenses (Rs.) 20,000 10,000
Direct Expenses (Rs.) 10,000 10,000
Other Factory Expenses (Rs.) 45,000 22,500
Indirect Materials (Rs.) 5,000 10,000
Normal Loss in weight (% on total units introduced in each
process) 5% 5%
Normal Scrap (% on total units introduced in each process) 10% 10%
Realisable value of scrap (per 10 units) (Rs.) 800 2,000
Output (units) 8,300 7,800
Prepare Process Accounts, Abnormal Loss Account and Abnormal Gain Account.
Q.9. M/s. XYZ and company manufacture a chemical which passes through three processes. The
following particulars gathered for the month of January, 2014:
Particulars Process I Process II Process III
Materials (litre) 400 208 168
Materials Cost Rs.38,400 Rs.18,800 Rs.6,000
Wages Rs.7,680 Rs7,600 Rs.2,200
Normal Loss (% of input) 4% 5% 5%
Scrap Sale Value - Rs.3 per Litre -
Output transferred to next process 50% 40% -
Output transferred to Warehouse 50% 60% 100%
Overheads are charged @ 50% of Direct Wages. You are required to Prepare Process
Accounts.
Q.10. Abad Chemicals Co. Ltd. produced three types of chemicals during the month of March,
2014 by three consecutive processes. In each Process 2% of the total weight put in is lost
and 10% is scrap. Scrap of Process I and Process II realize Rs. 100 a ton and that of Process
III Rs. 20 a ton. The products of the processes are dealt with as follows:
Particulars I II III
Passed on the next process 75% 50% -
Sent to warehouse for sale 25% 50% 100%
Details of Cost:
Raw Materials used: Tonnes 1,000 140 1,348
Rs. 1,20,000 28,000 1,07,840
Direct Wages 20,500 18,520 25,000
General Expenses 10,300 7,240 4,320
Prepare Process Cost Accounts showing cost per ton of each process.
Q.11. The following details for the year ending 31 st December, 2013 are available from the books
of a trader having three workshops and a wholesale warehouse.
Particulars Workshop A Workshop B Workshop C
Raw Materials Used (Tonnes) 250 152 145
Cost per Tonne Rs. 600 400 250
22
Direct Wages Rs. 4,29,000 1,01,250 52,800
Direct Expenses Rs. 69,000 88,350 13,450
Loss of Tonne due to Processing 4% 5% 2.5%
Proportion of Production transferred
To Workshop B at Cost 20%
To Workshop C at Cost 50%
Proportion of Production transferred
To Wholesale Warehouse 80% 50% 100%
Wholesale Warehouse:
Stock on 01-01-2013 12,500 10,000 20,000
Stock on 31-12-2013 in tonne 10 20 -
Sale were Rs.20,00,000, Salaries Rs.2,00,000 and Administrative Expenses Rs.1,00,000.
Prepare the respective Workshop Accounts showing the cost per tonne each workshop and
an account showing the net profit of the firm for the year 2013. Closing Stock in Warehouse
to be valued at the cost per ton in each workshop.
Q.12. The Product of a company passes through three direct processes, called respectively A, B
and C. from the past experience it is ascertained that wastage incurred in each process is as
under:
Process A 2%; process B 5%; Process C 20%.
The percentage of wastage is computed on the number of units entering the process
concerned.
The wastage of each process possesses a scrap value.
The wastages of processes A and B is sold at Rs.50 per 100 units and that of process C at
Rs.0.75 per unit.
Following information was obtained for the month of March, 2014:
20,000 units of crude materials were introduced in Process „A‟ at the cost of Rs.8,000.
Particulars Process A Process B Process C
Materials Consumed 4,000 1,500 1,000
Direct Labour 6,000 4,000 3,000
Manufacturing Expenses 1,800 3,500 1,000
Output in Units 19,500 21,000 15,900
Finished Product Stock:
1st March, 2014 2,000 3,000 5,000
31st March, 2014 1,500 4,000 ?
Stock valuation on 1st March 2014: per unit Re.1, Rs.1.50, Rs.2.00 respectively in Process A, B
and C.
Stocks on 31st March are to be valued as per valuation as on 1st March, 2014. Draw process
accounts A, B and C and process stock accounts of Process A, B and C.
Q.13. Satyug Times Ltd. submits the following information in respect of its product which passes
through three consecutive processes viz. Ingestion Process, Digestion Process and
Assimilation Process, for the month ended 31st January, 2014.
Particulars Ingestion Digestion Assimilation
Process Process Process
Quantitative Information (Kgs.)
Basic Raw Material @ Rs. 40 per Kg. 80,000 - -
Normal yield 80% 60% 50%
Output during the month 62,000 36,000 21,000
Stock of Process Output:
31-12-2013 8,000 8,000 5,000
31-01-2014 10,000 4,000 4,000
Other Additional Information:
Process Material Rs. 3,45,000 Rs. 8,26,000 Rs. 6,17,000
23
Labour Man Days 2,400 1,500 1,000
Labour Rate per Man Day Rs. 80 Rs. 100 Rs. 150
Machine Overheads 60% of Wages 50% of Process Rs. 2,34,000
Material
Other Manufacturing Overheads Rs. 2,75,000 Rs. 1,63,000 Rs. 1,27,000
Value of Opening Stock per Kg. Rs. 60 Rs. 140 Rs. 300
Scrap Value per Kg. Rs. 10 Rs. 15 Rs. 20
Finished stock of assimilation process was sold at Rs. 350 per Kg.
Prepare the Process Accounts, Process Stock Account, Normal Loss Account and the
Abnormal Gain/ Loss Account.
Q.14. M.U. Industries Ltd. is manufacturing a product which passes through three consecutive
processes, F-Yarn Process, S-Yarn Process and T- Yarn Process. The following figures have
been taken from their books for the year 31st March, 2014:
Particulars F- Yarn S- Yarn T- Yarn
Process Process Process
Quantitative Details
Basic Input @ Rs. 300 per unit 9,000 - -
Output during the year 8,000 6,000 5,000
% of Normal waste 10% 25% 15%
Process Stock – Opening 300 500 100
Process Stock – Closing 500 300 400
Monetary Information Rs. Rs. Rs.
Process Materials 4,20,000 6,60,000 8,73,000
Wages 2,67,000 3,73,500 3,11,100
Manufacturing Overheads 2,40,000 2,53,500 2,41,000
Value of Opening Stock per unit 420 680 900
Scrap Value per Unit 250 300 400
Closing Stock is to be valued at respective cost of each process (as per the respective
process accounts for the year ended 31st March, 2014).
You are required to prepare – (a) Process Accounts, (b) Process Stock Accounts, (c)
Abnormal Loss Account and (d) Abnormal Gain Account.
Q.15. Reliable Yarn Ltd. manufactures a yarn product. The product passes through three
consecutive processes. F.Y., S.Y. and T.Y. Relevant details for the month, 2014 are as under:
Particulars F.Y.Process S.Y.Process T.Y.Process
Quantitative information in Kilograms:
Basic Input Kilograms @ Rs. 10 per
Kilogram 2,000 - -
Output during the month 1,950 1,925 1,679
Stock of Process
- On 1st March, 2014 200 300 100
- On 31st March, 2014 150 400 59
Percentage of Normal Loss to Input in
Process 2% 5% 8%
Monetary Information: Rs. Rs. Rs.
Process Material 9,000 2,100 2,716
Wages 9,064 1,860 4,000
Value of Opening Stock 3,880 6,720 2,800
Scrap Value per Kilogram Re. 1 Rs. 2 Rs. 4
Closing Stock is to be valued at the respective cost of each process.
Prepare Process Accounts, Process Stock Accounts, Abnormal Loss and Abnormal Gain
Account. Find out the costing profit, when the sales out of T.Y. process stock are made at
Rs.40 per kilogram.
24
Q.16. Mr. Kale manufactures a product in two grades, Grade I and Grade II from common raw
material. Raw Material is introduced in „Basic Process‟ the produce of which is dealt with as
follows:
25% Sold in open market.
25% transferred to Grade I process and the balance 50% transferred to Grade II process.
The details of processes are as follows:
Particulars Basic Process Grade I Grade II
Process Process
Raw materials 1000 units - -
Cost per unit Rs. 200 - -
Other materials Rs. 25,000 Rs. 50,000 Rs. 30,000
Labour Rs. 60,000 Rs. 50,000 Rs. 50,000
Manufacturing O. Hs Rs. 70,000 Rs. 60,000 Rs. 60,000
Sale price per unit Rs. 400 Rs. 1,400 Rs. 900
Prepare process accounts and determine total profit earned by Mr. Kale assuming that there
is no stock in any process.
Q.17. Tea Estate Ltd. manufactures flavoured Tea which passes through three processes. The
following particulars are available for the year ended 30-06-2014:
Particulars Process
I II III
Raw Materials (Kg.) 10,000 4,600 1,500
Cost of Raw materials (Per Kg Rs.) 5 6 8
Direct Wages (Rs.) 24,000 18,000 12,250
Direct Expenses (Rs.) 15,200 10,736 8,590
Factory Expenses (Rs.) 20,960 6,000 4,255
Normal Loss (1%) 4% 8% 5%
Weight Loss (%) 6% 2% NIL
Scrap Value per Kg. (Rs.) 1.80 2.50 4
Output Transferred to next Process 60% 50% NIL
Output Sold 40% 50% 80%
Selling Price to Output Per Kg. 14 16 17
Transferred to Finished Stock NIL NIL 20%
% of Normal Loss and % of Weight Loss are based on total input in the process.
Prepare Process Account and Profit and Loss Account.
Q.18. M/s. Sagar Enterprises Ltd. Provides you the following data for the month of January, 2014,
about processes D, C and H:
Particulars Process D Process C Process H
Basic Raw Materials Introduced (Units) 18,000 3,1556 3,450
Cost of basic raw materials per unit (Rs.) 5.00 6.00 7.00
Labour Charges (Rs.) 52,000 36,000 30,000
Factory Overhead (Rs.) 30,440 14,874 15,660
Normal Loss (% on Total number of units input)
Scrap Value per unit (Rs.) 6% 5% 4%
Output sold at the end of process (%) 3.00 4.00 5.00
Output Transferred to next process (%) 30% 40% 100%
Selling price per unit of the output sold at the 70% 60% -
end of Process (Rs.) 13.50 17.50 18.50
Other common expenses not chargeable to process Accounts:
Office and Administrative overheads Rs. 36,000
Selling and Distribution overheads Rs. 23,636
You are required to prepare process D, C and H Accounts indicating clearly profit or loss in
each process and Costing Profit and Loss Account.
25
Q.19. Jai Ltd. provides you the following information about their processes for the year ended 31st
March, 2014.
Particulars Process – A Process – B Process – C
No. of Units introduced 15,000 4,600 4,000
Rate per Unit of Units introduced (Rs.) 40 48 55
Output during the year (Units) 14,000 12,000 8,800
Output transferred to next process (%) 60% 50% -
Output sold at End of the process (%) 40% 50% 80%
Output transferred to Finished Stock (%) - - 20%
Normal Loss (% of units introduced in 5% 8% 10%
each process)
Scrap Value per unit (Rs.) 15 35 55
Direct Wages (Rs.) 3,60,000 3,20,000 2,87,000
Direct Expenses 40% of Direct Rs. 1,28,720 50% of Direct
Wages Wages
Factory Overheads Rs. 1,18,500 35% of Direct Rs. 94,500
Wages
Selling Price per units of output sold (Rs.) 92 120 165
Prepare Process Account.
26
CONTRACT COSTING
Q.1. On 31st October, 2013, A undertook a Contract No. 786 for Rs.2,00,000. The following
information is available in respect of this contract for the accounting year ended 31 st
December 2013.
Particulars Rs.
Work Certified 40,000
Wages Paid 15,000
Materials Supplied 20,000
Other Expenses 3,000
Plant Supplied on 1-10-2013 20,000
Uncertified work 1,000
Materials unused lying at site 800
Wages due but not paid 600
Provide 10% depreciation on plant.
Prepare Contract Account in the books of A.
Q.2. The following is the summary of the entries in a contract Ledger as on 31st December, 2013
in respect of Contract No. 51:
Particulars Rs.
Materials (Direct) 60,000
Material (from stores) 13,000
Wages 34,600
Direct Expenses 13,400
Establishment charges 16,000
Plant 68,400
Sale of Scrap 3,640
Sub- contract Cost 14,400
You are given the following information:
(1) Accruals on 31-12-2013 are: Wages Rs.1,600 and Direct Expenses Rs.2,200.
(2) Depreciation on plant upto 31-12-2013 is Rs.17,100.
(3) Included in the above summary of abstract are wages Rs.2,000 and other Expenses
Rs.3,000 since certification. The value of the material used since certification is Rs.4,160.
(4) Materials on site on 31-12-2013 cost Rs.20,000
(5) Work certified was Rs.1,25,000.
Prepare Contract Account No. 51 and show that profit or loss should be taken into account
for the year ended 31st December 2013.
Q.3. The Jai Hind Construction Company undertook the construction of a building at a contract
price of Rs.2,00,00,000.
The date of commencement of contract was 1st May 2013.
The following cost information is given for the period ended 31st March 2014:
1. Direct Materials sent to the site – 5,000 tons @ Rs.1.50 per Kg.
2. Indirect Materials Rs.6,50,000
3. Direct Labour – 12,000 Mondays @ Rs.180 per manday.
4. Indirect Labour Charged at 7.5% of Direct labour.
5. Sub contract charges charged at 15% of indirect Materials.
6. Direct Materials Returned to stores 20 tons.
7. Direct Material Lost in an accident 5 tons.
8. Supervision charges paid Rs.8,000 per month.
9. Administrative overheads incurred Rs.12,000 per month.
10. Architect Fees charged at 2% of Work Certified.
27
11. Plant and Machinery installed at site on the date of commencement of contract at a cost
of Rs.15,00,000. Which is to be depreciated @ 12% p.a. under original cost method.
12. Cash received from contractee Rs.1,26,00,000 which is equal to 90% of Work Certified.
13. Direct Material at site as on 31st March 2014 – 15 tons.
14. Cost of work done but not certified was Rs.2,04,500 on 31st March 2014.
You are required to prepare a Contract Account for the period ended 31st March, 2014 in the
books of Jai Hind Construction Company and show what profit or loss should be taken into
account for the period ended 31st March, 2014.
Q.5. Mohan Construction Pvt. Ltd. obtained two contracts viz Angel and Paradise. Contract Angel
commenced on 1st October, 2010 and Contract Paradise started on 1st December, 2010.
Following information was extracted from their books for the period ended 31 st March, 2011.
Particulars Contract Angel Contract Paradise
Rs. Rs.
Contract Price 70,00,000 60,00,000
Cash Received 14,00,000 7,65,000
Plant issued at commencement 22,50,000 12,00,000
Work Certified 17,50,000 9,00,000
Work Uncertified 52,000 28,000
Direct Wages 2,95,000 1,77,500
Direct Expenses 1,36,500 88,700
Supervision Charges 27,500 22,500
Administrative Overheads 2,72,500 1,47,500
Sub-Contract Charges 63,700 44,200
Electricity Charges 48,800 26,600
Architect Fees 52,000 27,000
Indirect Materials 1,47,000 89,800
Direct Materials 3,58,000 1,97,200
Direct Material Returned to stores 14,000 12,000
Direct Materials at site at the end of period 73,000 42,000
Other Information:
(1) On 15th December, 2010 Direct Material costing Rs. 22,000 have been transferred to
contract Paradise from Contract Angel.
28
(2) On 21st February, 2011 Indirect Material Costing Rs. 15,000 have been transferred from
contract Paradise to contract Angel.
(3) Provide depreciation @ 20% p.a. on the original cost of plant.
You are required to prepare Contract Angel A/c and Contract Paradise A/c. for the period
ended 31-3-2011.
Q.6. M/s. Jadhav Constructions undertook contract for Rs. 5,00,00,000. On 1 st August,2008. The
contract was completed on 31st March, 2010. The Contractor closes his accounts on 31st
March. The details of the contract are as follows:
Particulars For the period ended For the year ended
31-03-2009 (Rs.) 31-03-2010 (Rs.)
Material Issued 95,48,500 1,17,65,000
Direct Labour 31,37,800 45,40,000
Subcontract charges 7,88,900 28,13,000
Administrative Overheads 15,85,400 31,42,000
Supervision Charges 3,45,600 8,05,500
Material Returned to Stores 1,32,400 2,44,300
Work Uncertified 5,23,200 -
Work Certified (cumulative) 2,00,00,000 5,00,00,000
Material at site 1,00,600 -
Cash Received 1,80,00,000 3,20,00,000
Architect Fees 4% of Work Certified 4% of Work Certified
The Plant and Machinery purchased on 01/08/2008 for the contract was Rs.84,25,000 and the
estimated scrap value of the Plant and Machinery at the end of the contract was Rs.4,25,000.
It realized on completion of contract at its estimated scrap value.
You are required to prepare:
(a) Contract A/c for the period ended 31-3-2009 and
(b) Contract A/c the year ended 31-3-2010.
Q.7. Rohan Construction Pvt. Ltd. obtained two contracts viz., Contract „X‟ and Contract „Y‟.
Contract „X‟ commenced on 1st April, 2013 and Contract „Y‟ started on 1st June, 2013,
following information extracted from their books for the year ended 31st March, 2014.
Particulars Contract ‘X’ Contract ‘Y’
(Rs.) (Rs.)
Materials Issued 4,45,000 4,95,000
Direct Wages 2,74,000 3,23,500
Direct Expenses 1,23,300 94,750
Sub. Contract Charges 73,350 45,750
Architect Fees 24,000 35,000
Administrative Overheads 3,24,750 3,74,800
Electric Services and Fittings 15,270 18,380
Plant Issued at Commencement 5,00,000 6,00,000
Contract Price 25,00,000 30,00,000
Work Certified 13,00,000 18,00,000
Work Uncertified 30,000 75,000
Cash Received 10,40,000 16,20,000
Accrued wages as on 31st March, 2009 15,000 18,000
Materials at site 40,000 70,000
Materials returned to store 3,000 10,000
On 20th October, 2013, Materials costing Rs.5,330 have been transferred to Contract „X‟ from
Contract „Y‟. Provide Depreciation @ 25% p.a. on original cost of plant.
You are required to prepare both Contract Accounts for the year ended 31st March, 2014.
29
Q.8. Raj Construction company has undertaken three contracts during the year and the following
particulars are available as on 31-12-2014.
Particulars Contract M Contract N Contract O
Rs. Rs. Rs.
Contract Price 10,00,000 25,00,000 7,50,000
Material issued to contract 1,65,000 2,24,000 1,89,000
Labour 1,02,800 1,26,500 1,75,000
Sub – contract charges 72,800 65,900 28,500
Supervision charges 12,000 18,000 15,000
Architect fees 10,000 15,000 25,000
Insurance charges 3,000 6,100 7,400
Work Certified 4,00,000 5,00,000 5,00,000
Work Uncertified 35,000 40,000 25,000
Amount received from contractee 3,20,000 4,50,000 3,75,000
Closing Stock of Material 9,000 10,000 20,000
All contracts were commenced during the current year. Total Depreciation on plants
amounted to Rs.11,200 and allocate the same to all contracts in the ratio of work certified.
Prepare Contract Accounts. Show the calculation of Profit transferred to Profit and Loss
Account.
Q.9. Navnirman Ltd. has undertaken three contracts. It furnishes the following information for the
year ended 31st March, 2014:
Particulars Mumbai Pune Nashik
Contract (Rs.) Contract (Rs.) Contract (Rs.)
1. Balances on 1st April, 2013
Material at site 100 2,000 -
Uncertified work 2,500 4,000 -
Plant at site 2,200 3,100 -
Work Certified 19,500 1,400 -
Provision for Contingencies 1,000 600
2. Transactions during the year
Material issued - 6,200 8,000
Subcontract charges 600 11,800 9,000
st
3. Balances on 31 March, 2014
Material at site - 1,000 800
Uncertified work - 1,000 3,850
Plant at site - 2,000 950
Work Certified 25,000 30,000 12,000
4. Contract price 25,000 40,000 50,000
5. Amount Received 25,000 27,000 10,800
6. Value of Plant transferred from Mumbai contract to Nashik contract Rs.1,550.
The company consistently adopts to policy of taking credit for the contract profit considering
the proportion of amounts received to the contract price.
You are required to:
a. Prepare the respective contract accounts for the year ended 31st March, 2014.
b. Find the net profit as per Profit and Loss Account.
Q.10. Amit Ltd. obtained two contracts viz. Nagpur and Aurangabad. Contract Nagpur
commenced on 1st October 2014 and Contract Aurangabad started on 1st December 2014.
Following information was extracted from their books for the year ended 31st March 2015.
Particulars Contract Contract
Nagpur (Rs.) Aurangabad (Rs.)
Contract Price 70,00,000 15,00,000
Cash Received 11,20,000 7,65,000
30
Plant issued at commencement 22,50,000 12,00,000
Work Certified 14,00,000 9,00,000
Work Uncertified 52,000 28,000
Direct Wages 2,95,000 1,75,500
Direct Expenses 1,36,500 30,700
Supervision Charges 27,500 22,500
Administrative Overheads 2,72,500 1,47,500
Sub-Contract Charges 63,700 -
Electricity Charges 48,800 -
Architect‟s Fees 52,000 27,000
Indirect Materials 1,47,000 1,62,000
Direct Materials 3,58,000 1,99,200
Direct Materials returned to Stores 14,000 -
Direct Materials at the site at the end of the period 73,000 54,000
Provide depreciation @ 20% p.a. on the original cost of Plant.
Prepare Contract A and Contract B Account for the period ended 31 st March 2015.
Q.11. Mahendra contractors undertook a contract for Rs. 15,00,000 on 1st July, 2012. The contract
was completed on 31st March, 2014. The contractor prepares his accounts on 31st March. The
details of the contract are:
Particulars Period From Period From
1-7-12 to 31-3-13 (Rs.) 1-4-13 to 31-3-14 (Rs.)
Material issued 1,52,000 3,30,000
Direct Wages 1,25,000 4,65,000
Direct Expenses 30,000 45,000
Materials returned to stores 22,000 15,000
Materials at site 20,000 8,000
Uncertified work 48,000 -
Office overheads 23,000 66,000
Material lost by fire - 5,000
Work certified 3,00,000 15,00,000
Plant issued 3,00,000 1,50,000
Provide depreciation @ 20% p.a. on plant. Prepare Contract Accounts for the years ended
31-3-2013 and 31-3-2014.
Q.12. Skyline Flyover Construction Ltd., has received a contract for construction of a flyover for a
contract price of Rs.820 lacs. The contractee has agreed to pay 90% of the Work Certified.
The Company has decided not to book any Profit to the P & L Account until 25% of the total
work is completed and thereafter in that ratio which the amount received bears to the total
contract price. The entire amount was received by 31-3-2014.
Skyline Flyover Constructions Ltd. has commenced their project work on 1st August, 2012
and completed the work by 31st January, 2014. The value of plant and Machinery bought for
the contract was Rs.57 lacs and the estimated scrap value of the machinery at the end of the
contract was Rs.12 lacs. The accounts are maintained on financial year ending 31 st March
and the details are as under:
Particulars 2012-2013 (Rs.) 2013-2014 (Rs.)
Materials 2,28,00,400 26,01,000
Wages 1,09,27,800 38,10,000
Direct Expenses 92,85,400 19,44,000
Indirect Expenses 87,88,400 11,05,000
Supervision Charges (monthly) 40,000 (p.m.) 30,000 (p.m.)
Administration Overheads (monthly) 82,500 (p.m.) 40,000 (p.m.)
Architect Fees 5% of work certified 5% of work certified
31
RCC Consultant Fees 3% of work certified 3% of work certified
Work uncertified at the year end 11,35,000 -
Materials at site at the year end 3,37,000 -
Amount received during the year 5,90,40,000 2,29,60,000
You are required to prepare Contract Accounts for the years ended 31st March, 2013 and 31st
March, 2014 and compute Profit/Loss from the contract.
Q.13. Bharat Construction Ltd., obtained the contract to construct a Residential Complex for Rs.300
lakh. The Contractee agrees to pay 90% of the work certified immediately upon the receipt
of the certificate from the Architect and the balance amount would be paid on the
completion of the contract.
The work was commenced on 1st August, 2010 and completed on 31st March, 2012. A
machine costing Rs.30,00,000 was specially bought for use on contract and it would fetch
Rs.3,00,000 as scrap value on completion of the contract. The accounts are closed on 31st
March, very year. Further details are as follows:
Particulars 31-03-2011 31-03-2012
Rs. Rs.
Monetary Information:
Wages 10,50,000 19,80,000
Indirect Materials 18,30,000 31,40,000
Direct Materials 3,95,000 6,80,000
Office Expenses 5,79,000 8,64,000
Price per ton of steel 42,000 44,000
Price per Brick 8 9
Scrapped Value of Bricks - 32,000
Work Certified (Cumulative) 1,20,00,000 3,00,00,000
Work Uncertified 5,00,000 -
Quantitative Information:
Steel: Purchased (Ton) 105 120
Returned (Ton) 4 3
Loss in Accident (Ton) - 5
Sold (Ton) - 3
Bricks: Purchased (Nos.) 1,20,000 1,50,000
Returned (Nos.) 3,000 2,000
Lost in Accident (Nos.) 1,500 -
Prepare Contract Accounts for the year ended 31-03-2011 and 31-03-2012.
Q.14. The following information relates to a contract for Rs.2,00,00,000 and for which 80% of the
value in progress as certified by the architect was paid by the contractee.
Particulars Ist Year IInd Year IIIrd Year
Rs. Rs. Rs.
Materials Issued 9,20,000 18,80,000 29,00,000
Direct Wages 14,00,000 27,00,000 19,00,000
Direct Expenses 1,00,000 1,90,000 2,20,000
Indirect Expenses 20,000 40,000 50,000
Work Certified (Cumulative) 45,00,000 1,50,00,000 2,00,00,000
Uncertified Work 1,00,000 1,00,000 -
Plant Issued 1,50,000 - -
Material on site at year end 50,000 70,000 1,00,000
Architect‟s Fees 4% of work 4% of work 4% of work
certified certified certified
32
The value of Plant at the end of Ist Year, IInd Year and IIIrd Year was Rs.1,20,000, Rs.90,000 and
Rs.75,000 respectively. Prepare contract Accounts for these three years and show the
calculation of profit transferred of Profit and Loss Account.
Q.15. Prepare the Contract Accounts and Contractee‟s Accounts from the following information
relating to a contract for Rs.60,00,000, the contractee paying 80% of the value of work done
as certified by the architect and the balance on completion.
Particulars 2014 – 15 2015 – 16 2016 – 17
Rs. Rs. Rs.
Material issued 7,20,000 8,80,000 5,04,000
Direct wages 6,24,000 7,95,200 6,20,800
Direct expenses 28,000 1,00,000 36,000
Indirect expenses 12,000 16,000 Nil
Work certified (Cumulative) 14,00,000 45,20,000 60,00,000
Architect fees 4% of work 4% of work 4% of work
certified certified certified
Work done but yet to be certified Nil 80,000 Nil
Plant at commencement (Rs.) 80,000 Nil Nil
Plant at the end of the year (Rs. 64,000 40,000 16,000
Q.16. Following details are related to Contract „P‟ for the year ended 31st March, 2014.
Particulars Rs.
Material Issued 8,00,000
Material at Site 50,000
Plant Issued 4,50,000
Depreciation on Plant 90,000
Work Certified ?
Work Uncertified 30,000
Reserves 1,40,000
Cash Received (80% of the Work Certified) 14,40,000
Outstanding Expenses 16,000
Direct Wages Paid 2,30,000
You are required to show the relevant items in the Balance Sheet in respect of above
contract as on 31st March, 2014.
33
Work Uncertified at the end of the year 13,80,000 -
Work Certified during the year 3,50,00,000 3,30,00,000
The value of Plant and Machinery sent to site was Rs. 60 lacs, whereas the scrap value of the
plant and Machinery at the end of the project was estimated to be Rs.3 lacs.
It was decided that the profit to be taken credit for should be that proportion of the
estimated net profit to be realized on completion of the project which the certified value of
work as 31-3-2014 bears to the total contract price. You are required to prepare Contract
Account for the period ended 31st March, 2014 along with the working of profit to be taken
credit for.
Q.18. M/s. Narendra Constructions obtained a contract to build a Fly-over Bridge at a contract
price of Rs.150 lacs. The Contractee agrees to pay 90% of value of the work done as certified
by the architect immediately on receipt of the certificate and to pay the balance on
completion of the contract. The Contactor commenced the work on 1 st May 2013 and it is
estimated to be completed by 31st December, 2014. The actual expenditure upto 31st March,
2014 and subsequent estimated expenditure upto 31st December, 2014 is furnished below.
Particulars Actual Expenditure Estimated Expenditure
Upto 31-03-2014 from 1-4-2014 to 31-12-2014
Rs. Rs.
Direct Materials 33,50,000 28,00,000
Indirect Materials 5,60,000 7,00,000
Direct Wages 8,42,000 7,95,000
Sub-Contract Charges 98,000 52,000
Architect Fees 1,84,000 2,84,000
Administrative Overheads 6,50,000 4,50,000
Special Equipment Charges 4,86,000 2,54,000
Supervision Charges 10,000 p.m. 12,000 p.m.
Establishment Charges 8,000 p.m. 9,000 p.m.
Other details: Actual (Rs.) Estimated (Rs.)
Cash Received 67,50,000 82,50,000
Closing Materials at site 4,10,000 -
Uncertified work 1,80,000 -
Certified Work (Cumulative) 75,00,000 1,50,00,000
A special Machinery Costing Rs.13,40,000 was bought for the contract and the estimated
scrap value of the machinery at the end of the contract would be Rs.1,40,000. It is decided
that the profit to be taken credit for should be that proportion of the estimated net profit to
be realized on completion of the contract which the certified values of work as on 31 st March,
2014 bears to the total contract price. Maintain 2% provision for contingencies on total cost
of contract (excluding such provision for contingencies).
You are required to prepare the Contract Account for the period ending 31 st March, 2014
and show your calculation of the Profit to be credited to the Profit and Loss Account for the
period ended 31st March, 2014.
Q.19. Marvel Infrastructures Ltd. commenced a contract on 1st April, 2009. The Total Contract Price
was for Rs.17,50,000 and it is likely to be completed on 31st December, 2010. The Actual
Expenditure upto 31st March, 2010 and subsequent estimated expenditure upto 31st
December, 2010 are given below:
Particulars Actual Expenditure Estimated Expenditure
upto 31-3-2010 from 1-4-2010 to 31-12-
(Rs.) 2010 (Rs.)
Material Issued 4,80,000 3,14,500
Direct Labour 2,20,000 1,60,000
Sub-Contract Charges 10,000 15,000
34
Chargeable Expenses 60,000 85,000
Plant Purchased 1,50,000 -
Plant Returned to stores at the end of
the period (Original Cost) 50,000 1,00,000
Architect fees 20,000 34,000
Material at Site 20,000 -
Work Certified (Cumulative) 10,00,000 17,50,000
Work Uncertified 25,000 -
Cash Received 8,00,000 9,50,000
The Plant is subject to annual depreciation @ 20% p.a. on Original Cost. That the Rs.9,000
would be sufficient to meet contingencies.
It was decided that the profit to be taken credit for should be that portion of the estimated
net profit to be realized on completion of the contract which the certified values of work as
on 31st March, 2014, bears to the Total Contract Price.
You are required to prepare Contract Account for the year ended 31st March, 2014 and show
your calculation of the Profit to be credited to the Profit and Loss Account for the year ended
31st March, 2014.
35
MARGINAL COSTING
Q.1. Calculate break-even point in units and in value when variable cost per unit Rs.2 total fixed
costs are Rs.40,000 and selling price per unit is Rs.3.
Q.2. From the following data, compute break-even sales and margin of safety:
Rs.
Sales 10,00,000
Fixed Cost 3,00,000
Profit 2,00,000
Q.4. A company has fixed expenses of Rs.90,000 with sales at Rs.3,00,000 and profit of Rs.60,000.
Calculate the Profit Volume Ratio, if, in the next period, the company suffered a loss of
Rs.30,000, Calculate the Sales Volume.
Q.6. (i) Find out contribution and BEP sales if Budgeted Output is 80,000 units. Fixed Cost
is Rs. 4,00,000. Selling Price per unit is Rs. 20. Variable Cost per unit is Rs. 10.
(ii) Find out Margin of safety, if profit is Rs. 20,000 and PV Ratio is 40%.
Q.8. Sales Rs.1,00,000, Profit Rs.10,000, Variable Cost 70%. Find out (a) PV ratio (b) Fixed Cost
and (c) Sales to earn a profit of Rs.40,000.
Q.9. ABC Ltd. furnishes you the following information relating to the half year ending 30 th Nov.
2014.
Particulars Rs.
Fixed expenses 50,000
Sales value 2,00,000
Profit 50,000
During the second half of the same year the company, has projected a loss of Rs.10,000.
Calculate-
36
(i) The P/V Ratio, break-even point and margin of safety for six months ending 30th Nov.,
2014.
(ii) Expected sales volume for second half of the year assuming that selling price and fixed
expenses remain unchanged in the second half year also.
(iii) The break-even point and margin of safety for the whole year 2014-2015.
Q.10. A company sells its product at Rs.15 per unit. In a period if it produces and sells 8,000 units,
it incurs a loss of Rs.5 per unit. If the volume is raised to 20,000 units it earns a profit of Rs.4
per unit. Calculate break-even point both in terms of rupees as well as in units.
Q.12. The following data have been extracted from the books of ABC Ltd.
Particulars Sales (Rs.) Profit (Rs.)
2012 5,00,000 50,000
2013 7,50,000 1,00,000
Q.13. The sales turnover and profit of M/s Arpit Ltd. during the two year 2011 and 2012 were as
follows:
Year Sales Profit
2010 9,00,000 1,20,000
2011 10,20,000 1,50,000
You are required to calculate (i) P.V. Ratio, (ii) BEP Sales, (iii) Sales required to earn a profit
of Rs.2,40,000, (iv) The profit made when sales are Rs.15,00,000
37
Q.16. Following figures have been extracted from the books of M/s. EFG Private Limited.
Financial Year Sales (Rs.) Profit/Loss (Rs.)
2011 – 12 4,00,000 15,000 (Loss)
2012 – 13 5,00,000 15,000 (Profit)
You are required to calculate:
1. Profit Volume Ratio
2. Fixed Costs
3. Break Even Point
4. Sales required to earn a profit of Rs.45,000
5. Margin of Safety in financial year 2012 – 13.
Q.17. The following information is available from records of a company as at 31 st March, 2010 and
2011.
Particulars 2010 (Rs. in lakhs) 2011 (Rs. in lakhs)
Sales 1,500 2,000
Profit 300 500
Calculate:
(i) P/V Ratio
(ii) Fixed Cost
(iii) Break Even Sales in Rs.
(iv) Sales required to earn profit of Rs.1,000 lakhs
(v) Profit for Sales of Rs.2,000 lakhs
(vi) Margin of Safety when Sales is Rs.1,000 lakhs
Q.19. SD and Co. has prepared the following budget estimates for the year 2000-2001: Sales
15,000units, Sales Value Rs.1,50,000, Fixed Expenses Rs.34,000, Variable Cost per unit Rs.6.
You are required to find:
(i) P.V. Ratio, (ii) Break Even point, (iii) Margin of Safety.
Also calculate revised profit volume ratio, Break-even point and margin of safety, if selling
price per unit is reduced by 10%
38
Q.21. You are given the following information for the next year
Particulars Rs.
Sales (10,000 units) 1,20,000
Variable Cost 48,000
Fixed Cost 60,000
(1) Find out the P. V. Ratio, Break-even point and the margin of safety.
(2) Evaluate the effect of following on P.V. Ratio, Break-even Point and the margin of safety.
(a) 10% increase in Variable Cost
(b) 10% decrease in Variable Cost
(c) 10% increase in Fixed Cost
(d) 10% decrease in Fixed Cost
(e) 10% increase in Physical Sales Volume
(f) 10% decrease in Physical Sales Volume
(g) 5% increase in Selling Price
(h) 5% decrease in Selling Price
(i) 10% increase in Selling Price and 10% decrease in Physical Sales Volume.
(j) 5% decrease in Selling Price and 10% increase in Physical Sales Volume
Q.22. Q Ltd. produces and sales a single article at Rs. 10 each. The marginal cost of production is
Rs. 6 each and fixed cost is Rs. 400 per annum.
Calculate:
(i) P.V. Ratio, (ii) The break even sales (in Rs. and No.), (iii) The sales to earn a profit of
Rs.500, (iv) Profit at sales of Rs.3,000, (v) New breakeven point if sales price is reduced by
10%, (vi) Margin of safety at sales of Rs.1,500 and (vii) Selling price per unit if the
breakeven point is reduced to 80 units.
Q.23. The following is the cost structure of a product. Selling price is Rs.100 per unit.
Variable Cost:
Material Rs.38
Labour Rs.14
Direct Expenses Rs.8
Fixed Overheards for the year:
Factory Overheads Rs.2,80,000
Office overheads Rs.2,20,000
No. of units produced and sold Rs.40,000
Calculate:
(i) P.V. Ratio, (ii) Breakeven point in units, (iii) Margin of safety amount, (iv) Breakeven
point if fixed overheads increased by 20%, (v) Revised P.V. Ratio when selling price
increased by 20%.
Q.24. A company produces and sells 1,500 units of a commodity at Rs.20 each. The variable cost of
production is Rs.12 per unit and fixed cost Rs.8,000 per annum.
Calculate:
(i) P.V. Ratio, (ii) Sales at breakeven point, (iii) Additional sales required to earn the same
amount of profit if selling price is reduced by 10%.
Q.25. Margin of safety is Rs.4,20,000 which is 30% of total sales and Profit Volume Ratio is 25%.
From the above calculate:
(i) Total Sales, (ii) Profit on Present Sales, (iii) Fixed Cost, (iv) Sales to earn profit
Rs.1,40,000.
Q.26. Margin of safety is Rs.8,00,000 which is 40% of total sales and Profit Volume Ratio is 30%.
From the above calculate:
(i) Total Sales, (ii) Profit on Present Sales, (iii) Sales to earn profit Rs.3,00,000,(iv) Fixed Cost.
39
Q.27. The following figures relate to Sonali Ltd.
Selling price per unit Rs. 40
Direct material per unit Rs. 12
Direct Labour per unit Rs. 9
Other Variable Overheads per unit Rs. 7
Fixed Factory Overheads Rs. 3,20,000
Fixed Office Overheads Rs. 4,30,000
Calculate: (i) P.V. Ratio, (ii) Breakeven sales in units and Rs., (iii) Sales to earn profit of
Rs.4,50,000, (iv) New breakeven point in Rs. and unit if fixed overheads are increased by
15%.
Q.29. A firm sells 25,000 units at a selling price of Rs.5 per unit. Its fixed cost is Rs.40,000 and
variable expenses Rs.50,000. Find out the Break-even point for the firm. Also, find out BEP
when:
1. The selling price is increased by 30%.
2. The fixed cost is increased by 15%.
3. The fixed cost is decreased by 25%.
4. The selling price is decreased by 20%.
Q.30. A company annually manufactures and sells 20,000 units of a product, the selling price of
which is Rs.50 and profit earned is Rs.10 per unit.
The analysis of cost of 20,000 units is
Material Cost Rs.3,00,000
Labour Cost Rs.1,00,000
Overheads (50% variable) Rs.4,00,000
You are required to compute:
(i) Contribution per unit, (ii) PV Ratio, (iii) Breakeven sales in Rs., (iv) Break even sales in
units, (v) Sales required to earn a profit of Rs.4,00,000, (vi) Profit when sales is 18,000 units,
(vii) Margin of safety when actual sales is Rs.7,00,000.
40
STANDARD COSTING
Q.1. From the following particulars calculate:
(i) Material Cost Variance
(ii) Material Price Variance
(iii) Material Usage Variance
Standard Actual
Material 1,000 kg 900 kg
Price Rs.12 per kg Rs.16 per kg
Q.4. A manufacturing concerns which has adopted standard costing furnishes the following
information:
1. Standard Material for 70 kg, finished products, 100 kg.
2. Standard price of material Re. 1 per Kg.
3. Actual output 2,10,000 kg.
4. Actual material used 2,80,000 kg.
5. Cost of material Rs.2,52,000.
Calculate:
(1) Material Usage Variance. (2) Material Price Variance. (3) Material Cost variance.
Q.6. G Chemical Industries provide the following from their records. For making 10 Kgs.,
standard materials requirement is:
41
Material Quantity (Kg) Rate per Kg (Rs.)
A 8 6.00
B 4 4.00
During April 2002, 1,000 Kgs were produced. The actual consumption of materials is as
under:
Materials Quantity (Kg) Rate per Kg (Rs.)
A 750 7.00
B 500 5.00
Calculate: All Material Variances.
Q.10. The following details are available from the records of ABC Ltd. engaged in manufacturing
Article „A‟ for the week ended 28th September.
The standard labour hours and rates of payment per article „A‟ were as follows:
Hours Per hour (Rs.) Total (Rs.)
Skilled Labour 10 3.00 30
Semi-skilled Labour 8 1.50 12
Unskilled Labour 16 1.00 16
58
The actual production was 1,000 articles „A‟ for which the actual hours worked and rates are
given below:
Hours Per hour (Rs.) Total (Rs.)
Skilled Labour 9,000 4.00 36,000
Semi-skilled Labour 8,400 1.50 12,600
Unskilled Labour 20,000 0.90 18,000
37,400 66,600
From the above set of data you are asked to calculate:
(a) Labour Cost Variance
(b) Labour Rate Variance
42
(c) Labour Efficiency Variance
(d) Labour Mix Variance
(e) Labour Yield Variance
Q.11. Calculate material and labour variance from the following data:
For 5 units of Product A, the Standard Data are:
Material 40 kg @ Rs. 25.00 per kg
Labour 100 hours @ Rs. 2.50 per hour.
Actual data are:
Actual Production- 1000 Units.
Material 7,840 kg. @ Rs. 27.00 per kg
Labour 19,800 hours @ Rs. 2.60 per hour.
Q.14. The following details relating to a product are made available to you:
Standard cost per unit:
Material 50 kg. @ Rs. 40 per Kg.
Labour 400 hours @ Rs. 1 per hour.
Actual Cost : (For an output of 10 units)
Material 590 Kg. @ Rs. 42 per Kg.
Labour 3,960 hours @ 1.10 per hour
Calculate following variances:
1. Material Cost Variance 4. Labour Cost Variance
2. Material Usage Variance 5. Labour Efficiency Variance
3. Material Price Variance 6. Labour Rate Variance
44
COST CONTROL ACCOUNTS
(NON-INTEGRATED ACCOUNTING SYSTEM)
Q.1. The following transactions took place during October in X Co., Ltd. Enter the transactions in
the Financial and Cost Books. Rs.
(1) Materials purchased:
Credit purchases 40,000
Cash purchases 38,000
Credit purchases for Job No. 20 11,000
(2) Returned to suppliers 1,500
(3) Direct material issued to jobs 54,000
(4) Indirect material issued to jobs 1,400
(5) Material returned from job to stores 1,200
(6) Material transferred from Job No. 18 to Job No. 42 2,300
Q.2. Rockman Ltd. maintains separate set of books for financial accounts and cost accounts. The
following information is furnished for the year 2011.
Particulars Rs.
Stores Ledger Control A/c 60,000
Work-in-progress Ledger Control A/c 90,000
Finished Goods Ledger Control A/c 1,40,000
General Ledger Adjustment A/c 2,90,000
Transactions for the year are:
Materials purchased 6,60,000
Materials issued as:
- - Direct materials 4,50,000
- - Indirect materials 1,20,000
Wages paid allocated as:
- - Direct cost 2,70,000
- - Indirect cost 90,000
Production expenses 2,40,000
Value of finished goods produced 10,80,000
Closing stock of finished goods produced 1,20,000
Administration expense 2,40,000
Selling expenses 1,80,000
Sales 18,00,000
Pass Journal Entries & prepare the necessary control accounts in books of costing records.
Q.3. Outland Engineering Co‟s cost ledger indicates the following opening balance as on 1-1-
2014: Rs. Rs.
General ledger adjustment account - 15,200
Stores ledger control account 8,700 -
Work-in-progress ledger control account 4,300 -
Finished goods ledger control account 2,200 -
15,200 15,200
At the year end, the following information is obtained:
Purchase for stores 57,600
Purchase for special jobs 1,700
Direct wages 38,600 -
Indirect factory wages 9,500 -
Administration salaries 9,700 -
Selling and distribution salaries 4,300 62,100
45
Production expenses 12,400
Administration expenses 8,500
Selling and distribution expenses 5,400
Stores issued to production 54,700
Stores issued to maintenance 2,500
Return to supplier 200
Production overheads absorbed by production 24,500
Administration overheads absorbed by finished goods 15,200
Selling and distribution overheads recovered on sales 9,600
Products finished during the year 1,17,700
Finished goods sold at cost 1,32,300
Sales 1,50,000
You are required to record the entries in the cost ledger for the year and prepare a Trial
Balance.
Q.4. From the following data in respect of a company, prepare the Journal and the ledger:
Particulars Dr. Rs. Cr. Rs.
a. Closing balance at the end of accounting period:
Stores Control Account 2,000 -
Work-In-Progress Account 6,000 -
Finished Goods Control Account 8,000 -
Cost Ledger Control Account - 16,000
b. Financial transactions during the accounting period: Rs.
c. Stores purchase
- For Stock 38,000
- For Special Jobs 2,000
Wages Analysis
- Factory 40,000
- Office 4,000
- Sales office 6,000
Goods sold (Sales) 2,00,000
Other expenses 80,000
d. Cost transactions and cost analysis during the period: Rs. Rs.
Materials issued analysis
- Direct materials 20,000
- Indirect materials(Factory) 10,000
Wages Analysis
- Direct Wages 30,000
- Indirect Wages (Factory) 10,000
Overhead Incurred and recovered Incurred Recovered
Manufacturing 50,000 65,000
Administration 10,000 13,500
Selling and Distribution 20,000 27,000
Goods Finished at Cost 1,20,000 -
Cost of Goods Sold 1,38,000 -
Q.5. ABC Ltd. follows non-integrated system of Accounting. Following is the Trial Balance as on
01-01-2012:
Particulars Dr. Rs. Cr. Rs.
Stores Ledger Control A/c 2,50,000 -
Work-In-Progress Control A/c 2,00,000 -
Finished Goods Control A/c 3,50,000 -
Financial Ledger Control A/c - 8,00,000
Total 8,00,000 8,00,000
46
Following were the transactions during the month of March: Rs.
Materials Purchased 7,50,000
Materials issued to:
- Production 3,00,000
- Factory 40,000
- Office 10,000
Total Wages Paid 3,00,000
Direct Wages charged to Production 2,50,000
Indirect Wages 50,000
Office overheads Paid 30,000
Office overheads applied to Finished goods 38,000
Selling and Distribution Overheads incurred 30,000
Selling and distribution Overheads applied to Cost of Sales 31,000
Factory overheads charged to production @ 35% of Direct wages
Finished goods Produced 8,00,000
Cost of finished goods sold 10,00,000
Sales 12,00,000
Prepare Journal & post them into Ledger:
(a) Stores Ledger Control A/c
(b) Work-In-progress control A/c
(c) Finished goods Ledger control A/c
(d) Financial Ledger Control A/c
(e) Factory Overhead Control A/c
(f) Office Overhead Control A/c
(g) Selling and Distribution Overhead Control A/c
(h) Profit and Loss A/c
Q.6. On 31st March 2015, the following balances were extracted from the books of East and West
company.
Particular Dr. Rs. Cr. Rs
Stores ledger control A/c 3,50,000 -
Work-in-Progress Control 3,80,000 -
Finished Goods control A/c 2,50,000 -
Cost ledger Control A/c - 9,80,000
Total 9,80,000 9,80,000
The following transactions took place in March, 2015:
Particulars Rs.
Raw Materials:
- Purchased 9,50,000
- Return to suppliers 30,000
- Issued to production 9,80,000
- Returned to stores 30,000
Productive Wages 4,00,000
Indirect Labour 2,50,000
Factory overheads 5,00,000
Selling and Distribution Overheads 4,00,000
Cost of finished goods transferred to warehouse 21,30,000
Cost of Goods sold 21,00,000
Sales 30,00,000
Factory overheads are applied to production at 150% of Direct wages, any under/over
absorbed overhead being carried forward for adjustment in the subsequent months. All
selling and distribution overheads are treated as period costs and charged off to the Profit
and Loss Account of the month in which they are incurred.
Show the necessary Control Accounts, Costing Profit and Loss Account and the Trial Balance.
47
Q.7. As on 31st March, 2011, the following balances were extracted from the books of the Deluxe
Manufacturing Company, which follows Non-Integrated System of Cost Accounting:
Particular Dr. Rs. Cr. Rs.
Stores Ledger Control A/c 56,000 -
Work-in-Progress Control A/c 60,800 -
Finished Goods Control A/c 40,000 -
General Ledger Control A/c - 1,56,800
1,56,800 1,56,800
The following transactions took place in April 2011:
Particulars Rs. Particulars Rs.
Raw Materials: Factory overheads expenses
Purchased 1,52,000 incurred 80,000
Returned to suppliers 4,800 Selling & Administrative expenses 64,000
Issued to production 1,56,800 Cost of finished goods transferred
Returned to stores 4,800 to warehouse 3,40,800
Productive wages 64,000 Cost of Goods sold 3,36,000
Indirect Labour 40,000 Sales 4,80,000
Factory overheads are applied to production at 150% of direct wages, any under/over-
absorbed overheads being carried forward for adjustment in the subsequent months. All
administrative and selling expenses are treated as period costs and charged off to the Profit
and Loss Account of the month in which they are incurred:
Show the following accounts in the Company‟s books:
(a) General Ledger Control A/c (b) Stores Ledger Control A/c
(c) Work-In-Progress Control A/c (d) Finished Goods Stock Control A/c
(e) Factory overheads Control A/c (f) Costing Profit and Loss A/c
(g) Trial Balance as at 30th April, 2011.
Q.8. Orange Limited opens the costing record with the balances as on 1 st January, 2013. From the
following information, you are required to record the entries in the Cost Ledger for the year
ended 31st December 2013 and prepare Trial Balance.
Particulars Dr. (Rs.) Cr. (Rs.)
Material Control A/c 1,21,000
Work-in-Progress Control A/c 59,000
Finished Stock Control A/c 1,20,000
Production Overhead Control A/c 5,000
Administration Overhead Control A/c 9,000
Selling and Distribution Overhead Control A/c 4,000
General Ledger Adjustment A/c 3,00,000
3,09,000 3,09,000
st
Transactions during the year ended 31 December 2013:
Particulars Rs.
Material Purchased 4,77,000
Material issued to jobs 4,74,000
Material to work maintenance 38,000
Material to administration office 1,000
Material to selling department 4,000
Wages – Direct 1,44,000
Wages – Indirect 62,000
Transport for incoming material 5,000
Production overhead 2,48,000
Production overhead absorbed 3,55,000
Administration overhead 67,000
Administration overhead allocated to production 49,000
48
Administration overhead allocated to sales 12,000
Selling and Distribution overhead 61,000
Selling and Distribution overhead absorbed 79,000
Finished goods produced 9,55,000
Finished goods sold 9,73,000
Sales 12,00,000
Q.9. As on 31st March, 2013, the following balances existed in Ashish Co. Ltd‟s Cost ledger.
Particulars Dr. Rs. Cr. Rs.
Stores Ledger Control Account 6,02,870 -
Work in progress Control Account 2,44,730 -
Finished Stock Ledger Control Account 5,03,890 -
Manufacturing Overhead Control Account - 21,050
Cost ledger Control Account - 13,30,440
Total 13,51,490 13,51,490
During the next three months the following items arose:
Particulars Rs.
Finished product (at cost) 4,21,670
Manufacturing Overhead Incurred 1,83,020
Raw materials purchased 2,46,000
Factory Wages 1,01,060
Indirect Labour 43,330
Cost of sales 3,71,780
Materials issued to production 2,54,630
Sales return at cost 10,760
Materials returned to suppliers 5,800
Manufacturing overhead charged to production 1,54,400
You are required to write up:
(i) Cost ledger Control account
(ii) Stores ledger Control account
(iii) Manufacturing Overhead Control account
(iv) Work in progress Control account
(v) Finished Stock Ledger Control Account
(vi) Trial Balance(indicating, in brief, what each balance represents)
(vii) Cost of Sales A/c
Q.10. As of 31st March, 2014 the following balances existed in a firm‟s cost ledger, which is
maintained separately on a double entry basis:
Particulars Dr. Rs Cr. Rs
Stores Ledger Control A/c 3,00,000 -
WIP Control A/c 1,50,000 -
Finished Goods Control A/c 2,50,000 -
Manufacturing Overheads Control A/c - 15,000
Cost Ledger Control A/c - 6,85,000
7,00,000 7,00,000
During the next quarter, the following items arose: Rs.
Finished Product (at cost) 2,25,000
Manufacturing overhead incurred 85,000
Raw materials purchased 1,25,000
Factory wages 40,000
Indirect labour 20,000
Cost of sales 1,75,000
Materials issued to production 1,35,000
Sales returned (at cost) 9,000
49
Materials returned to suppliers 13,000
Manufacturing overhead charged to production 85,000
You are required to prepare the Cost Ledger Control A/c, Stores Ledger Control A/c, WIP
Control A/c, Finished Stock Ledger Control A/c, Manufacturing Overhead Control A/c,
Wages Control A/c, Cost of Sales A/c, and the Trial Balance at the end of the quarter.
Q.11. Following are the balances in Cost Ledger of a Manufacturing Company on 1st April, 2015.
Particulars Debit (Rs.) Credit (Rs.)
Finished Stock Ledger Control A/c 4,580 -
Factory Overhead Control A/c 1,020 -
Work-in-Progress Control A/c 2,465 -
Stores Ledger Control A/c 4,420 -
Cost Ledger Control A/c - 12,485
Following are the transactions for the month ending on 30th April, 2015:
Particulars Rs.
Raw material purchases 64,500
Materials issued to production 51,520
Factory wages 12,840
Factory overhead incurred 8,120
Indirect labour 2,460
Factory overhead charged to production 11,600
Cost of sales 57,850
Sales return at cost 1,000
Finished product at cost 67,500
Sales 60,000
Prepare the following cost controls accounts:
(i) Cost ledger Control Account
(ii) Work in progress Ledger Control Account
(iii) Finished stock Ledger Control Account
(iv) Stores Ledger Control Accounts
(v) Cost of Sales Account
(vi) Works Overheads Control Account
(vii) Costing P & L Account
Q.12. Following are the balances in Cost ledger of a Manufacturing Company on 1st April, 2014.
Debit (Rs.) Credit (Rs.)
Stores ledger Control Account 17,000 -
Work-In-Progress Ledger Control Account 22,800 -
Finished Stock ledger Control Account 12,000 -
Cost Ledger Control Account - 51,800
You are the given the following information for the year ending 31st March, 2015.
Particulars Rs.
Purchase of materials 50,000
Direct Factory Wages 70,000
Manufacturing Expenses 44,600
Selling and Distribution Expenses 15,400
Material issued to production 47,200
Manufacturing Expenses Recovered 44,440
Selling and Distribution Expenses Recovered 15,320
Sales 1,60,000
Stock of Materials at end 19,800
Stock of Finished Goods at end 14,700
Work-In-Progress at end 24,700
Prepare related Cost Control Accounts.
50
Q.13. Cost Ledger of a company shows the following balances as on 1st April, 2016.
Particulars Debit(Rs.) Credit(Rs.)
Finished Stock Ledger Control A/c 6,840 -
Work-in-Progress Ledger Control A/c 27,400 -
Stores Ledger Control A/c 10,500 -
Cost Ledger Control A/c - 44,740
44,740 44,740
Transactions for the year 2016-17 are as below:
Direct Wages 88,400
Works overheads allocated to production 29,500
Stores issued to production 87,500
Goods finished during the year 2,30,000
Finished goods sold (No stock left at the year-end) 2,75,000
Stores Purchased 97,500
Stores issued to factory repairs only 1,500
Carriage inwards on stores issued for production 600
Work expenses 4,500
Office and Administration expenses 6,500
You are required to prepare:
(i) Cost ledger control account (ii) Cost of sales account
(iii) Works overheads control account (iv) Stores ledger control account
(v) WIP ledger control account (vi) Finished stock ledger control account
Q.14. Pass the journal entries in the cost books of (non-integrated system) for the following
transactions:
(i) Materials worth Rs.25,000 returned to the stores from job.
(ii) Gross total wages paid Rs.48,000. Employer contribution to P.F and state Insurance
amounts to Rs.2,000. Wages analysis book detailed Rs.20,000 towards direct labour,
Rs.12,000 towards indirect factory labour, Rs.10,000 towards salaries, etc. to office staff
and Rs.8,000 for salaries etc. to selling and distribution staff.
Q.15. Pass the journal entries for the following transactions in a double entry cost accounting
system: Rs.
(a) Issue of materials:
Direct 5,50,000
Indirect 1,50,000
(b) Allocation of wages and salaries:
Direct 2,00,000
Indirect 40,000
(c) Overheads absorbed in jobs:
Factory 1,50,000
Administration 50,000
Selling 30,000
(d) Under/over absorbed overheads:
Factory (over) 20,000
Administration (under) 10,000
Q.16. From the following figures ascertained from Costing records and financial Books of a
factory, you are required to pass necessary entries in the cost journal (assume that a system
of maintain control accounts prevails in the organization.)
Particulars Rs.
Purchases 3,90,000
Carriage inward 5,850
51
Stores issued 3,58,800
Productive Wages 3,46,320
Unproductive Labour 1,21,680
Works On – Cost 3,48,400
Materials used in repairs 3,120
Cost of Completed jobs 12,80,630
Q.17. The following balances have been extracted from the books of M/s Siddharth Ltd., as at
1-1-2014:
Particulars Dr. Rs. Cr. Rs.
General ledger Adjustment A/c - 81,228
Stores ledger Control A/c 40,852 -
Work-in-progress Ledger Control A/c 9,690 -
Finished Goods ledger Control A/c 30,686 -
81,228 81,228
The summary of transactions during the year 2014 is as under:
Particulars Rs.
Stores purchased for stock 2,51,846
Purchases against specific jobs 28,402
Stores issued: Direct materials 1,80,642
Indirect materials 65,813
Stores returned to suppliers 22,187
Wages to Direct workers 1,42,682
Wages to indirect workers 41,841
Salaries to Sales Office Staff 31,832
Warehouse Salaries 26,419
Head office Salaries 8,100
Works overhead Expenses 1,28,832
Sales office and Showroom Expense 61,432
Warehouse and Delivery Expense 48,919
Head Office Expenses 28,602
Overhead absorbed in costs: Work 2,22,690
Selling 90,742
Overhead absorbed in costs: Distribution 79,108
Office 35,819
Costs of goods produced during the year 5,78,412
Value of finished goods sold (at cost) 6,13,826
(at selling price) 8,45,400
Q.18. The cost ledger of a company showed the following balances as at 1st January, 2013.
Particulars Dr. Rs. Cr. Rs.
Stores Ledger Control A/c 1,05,000
Work-in-Progress Control A/c 78,400
Finished Goods Control A/c 55,800
Works Overhead Control A/c 1,000
Administration Control A/c 600
Cost Ledger Control A/c or general Ledger Adjustment A/c 2,38,800
2,39,800 2,39,800
st
Further balances resulting from the operations for the year ended 31 December 2013 were:
Particulars Rs.
Stores Purchases 3,66,000
Stores issued to production Order 3,93,000
Stores issued to Works and Repair Order 15,000
52
Wages 6,15,000
Production Labor 5,90,000
Unproductive Labor 25,000
Works Overheads allocated to Production Order 1,79,000
Works Expenses 1,40,000
Administration Expenses 18,000
Administration Overheads allocation to Production Order 18,400
Goods Finished during the year 11,72,000
Finished Goods Sold(Cost) 12,00,000
Sales Expenses 13,400
Pass Journal Entries.
53