Professional Documents
Culture Documents
Small Unit Tactics Hanbook Ver 3
Small Unit Tactics Hanbook Ver 3
com
e
pl
m
Sa
SUTS3
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
thelightningpress.com
SMARTBOOK
Third Edition
(SUTS3)
e
pl
m
Sa
Small Unit
TACTICS
Planning & Conducting Tactical Operations
Third Edition (SUTS3)
Notice of Liability
Sa
The information in this SMARTbook and quick reference guide is distributed on an “As Is”
basis, without warranty. While every precaution has been taken to ensure the reliability
and accuracy of all data and contents, neither the author nor The Lightning Press shall
have any liability to any person or entity with respect to liability, loss, or damage caused
directly or indirectly by the contents of this book. If there is a discrepancy, refer to the
source document. This SMARTbook does not contain classified or sensitive information
restricted from public release. “The views presented in this publication are those of the
author and do not necessarily represent the views of the Department of Defense or its
components.”
SMARTbook is a trademark of The Lightning Press.
About our cover photo: U.S. Soldiers with the 2nd Battalion, 503rd Infantry Regiment,
173rd Infantry Brigade Combat Team (Airborne) engage opposing forces in a simulated
exercise during Saber Junction 18 at Hohenfels Training Area, Germany, Sept. 26, 2018.
(U.S. Army photo by Cpl. Gabrielle Weaver)
Credits: Photos courtesy of HJ Images; photos by Jeong, Hae-jung. All other photos cour-
tesy Dept. of the Army and/or Dept. of Defense and credited individually where applicable.
Printed and bound in the United States of America.
www.TheLightningPress.com
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
(SUTS3)
Notes to Reader
Planning & Conducting Tactical Operations
Tactics is the employment and ordered arrangement of forces in relation to each
other. Through tactics, commanders use combat power to accomplish missions.
The tactical-level commander uses combat power in battles, engagements, and
small-unit actions.
The nature of close combat in land operations is unique. Combatants routinely
come face-to-face with one another in large numbers in a wide variety of operational
environments comprising all types of terrain. When other means fail to drive enemy
forces from their positions, forces close with and destroy or capture them.
An offensive operation is an operation to defeat or destroy enemy forces and gain
control of terrain, resources, and population centers. Offensive operations impose
the commander’s will on an enemy. The offense is the most direct means of seizing,
retaining, and exploiting the initiative to gain a physical and psychological advantage.
The four types of offensive operations are movement to contact, attack, exploitation,
and pursuit.
e
A defensive operation is an operation to defeat an enemy attack, gain time, econo-
mize forces, and develop conditions favorable for offensive or stability operations.
pl
Defensive operations are a counter to an enemy offensive action, and they seek
to destroy as much of the attacking enemy forces as possible. Friendly forces use
three types of defensive operations to deny enemy forces advantages: area defense,
mobile defense, and retrograde.
m
The Small Unit Tactics SMARTbook translates and bridges operational-level
doctrine into tactical application -- in the form of tactics, techniques and procedures --
and provides the “how to” at the small-unit level as a ready reference at the battalion,
company, platoon, squad and fire team level.
Sa
SUTS3 is the third revised edition of The Small Unit Tactics SMARTbook, completely
updated for 2019 to include ADP 3-90 Offense and Defense (Jul ‘19); FM 3-0 Operations
w/Chg 1 (Dec ‘17), FMs 3-90-1 & -2 (May ‘13), ATP 3-21.8 Infantry Platoon and Squad
(Apr ‘16), ATP 3-21.10 Infantry Rifle Company (May ‘18), TC 3-21-76 The Ranger
Handbook (Apr ‘17), and the latest versions of more than 20 additional references.
Introduction-1
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
FM 3-90-1
OFFENSE AND DEFENSE
VOLUME 1
MARCH 2013
DISTRIBUTION RESTRICTION:
Approved for public release; distribution is unlimited.
HEADQUARTERS, DEPARTMENT OF THE ARMY
e
pl
m
ATP 3-21.10 ATP 3-21.8 TC 3-21.76 plus 20+ more!
SUTS3 chapters and topics include tactical fundamentals, the offense; the defense; train,
advise, and assist (stability, peace, and counterinsurgency operations); enabling opera-
Sa
2-Introduction
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
ing attack. The commander’s intent and the mission variables determine which of these
forms of attack to employ. Commanders conduct each of these forms of attack, except for
a raid, as either a hasty or a deliberate operation.
Chap 7: Urban & Regional Environments
Army doctrine addresses five regional environments: desert, cold, temperate, mountain,
and jungle. Another area of special consideration involves urban area. The continued
trend worldwide of urban growth and the shift of populations from rural to urban areas
continues to affect Army operations. The urban environment, consisting of complex
terrain, dense populations, and integrated infrastructures, is the predominant operational
environment in which Army forces currently operate.
Chap 8: Patrols & Patrolling
The two categories of patrols are combat and reconnaissance. Patrols that depart the
main body with the clear intent to make direct contact with the enemy are called combat
patrols. The three types of combat patrols are raid patrols, ambush patrols (both of which
are sent out to conduct special purpose attacks), and security patrols. Patrols that depart
the main body with the intention of avoiding direct combat with the enemy while seeing
out information or confirming the accuracy of previously-gathered information are called
reconnaissance patrols. The most common types reconnaissance patrols are area,
route, zone, and point. Leaders also dispatch reconnaissance patrols to track the enemy,
and to establish contact with other friendly forces.
Introduction-3
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
(SUTS3)
References
The following references were used in part to compile The Small Unit Tactics SMARTbook.
Additionally listed are related resources useful to the reader. All references are available to
the general public and designated as “approved for public release; distribution is unlimited.”
The Small Unit Tactics SMARTbook does not contain classified or sensitive information
restricted from public release.
4-References
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
(SUTS3)
Table of Contents
Tactical
Chap 1
Fundamentals
I. The Art & Science of Tactics........................................................1-1
I. Tactics...............................................................................................................1-1
Tactics, Techniques, and Procedures (TTPs).................................................1-1
II. The Tactical Level of Warfare..........................................................................1-1
III. The Art and Science of Tactics.......................................................................1-2
Close Combat................................................................................................1-3
Common Tactical Concepts............................................................................1-6
IV. Solving Tactical Problems...............................................................................1-8
e
V. Hasty vs. Deliberate Operations......................................................................1-9
VI. Risk..............................................................................................................1-10
Risk Management Process..........................................................................1-12
pl
II. The Army’s Operational Concept..............................................1-13
I. Unified Land Operations.................................................................................1-13
II. Decisive Action..............................................................................................1-13
Operations (Unified Logic Chart)..................................................................1-15
m
Elements of Decisive Action.........................................................................1-16
III. Unified Action................................................................................................1-18
A. Joint Operations.......................................................................................1-18
B. Multinational Operations..........................................................................1-19
Sa
Table of Contents-1
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
e
III. Techniques for Issuing Orders......................................................................1-56
VIII. Preparation and Pre-Combat Inspection (PCI).....................1-57
pl
I. Preparation.....................................................................................................1-57
II. The Pre-Combat Inspection (PCI).................................................................1-57
IX. Rehearsals.................................................................................1-63
I. Rehearsal Techniques....................................................................................1-64
m
II. Rehearsal Types............................................................................................1-66
X. The After Action Review (AAR).................................................1-67
I. Types of After Action Reviews........................................................................1-68
Sa
The
Chap 2
Offense
The Offense.......................................................................................2-1
I. Types of Offensive Operations.........................................................................2-2
II. Purposes of the Offense..................................................................................2-3
III. Forms of Maneuver........................................................................................2-4
IV. Common Offensive Control Measures...........................................................2-6
V. Transition.........................................................................................................2-8
VI. Characteristics of Offensive Operations.......................................................2-10
I. Movement to Contact..................................................................2-11
Meeting Engagement........................................................................................ 2-11
I. Organization...................................................................................................2-12
II. Planning & Preparation..................................................................................2-13
III. Conducting the MTC - A Small Unit Perspective..........................................2-14
2-Table of Contents
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
II. Attack...........................................................................................2-17
Hasty vs. Deliberate Attacks..............................................................................2-17
I. Organization...................................................................................................2-18
II. Planning & Preparation..................................................................................2-19
III. Conducting the Attack - A Small Unit Perspective........................................2-20
III. Exploitation................................................................................2-23
Conducting the Exploitation - A Small Unit Perspective....................................2-23
I. Organization...................................................................................................2-23
II. Planning & Preparation..................................................................................2-23
III. Execution......................................................................................................2-23
IV. Pursuit........................................................................................2-27
I. Organization...................................................................................................2-28
A. Frontal Pursuit.........................................................................................2-28
B. Combination Pursuit................................................................................2-29
II. Planning & Preparation..................................................................................2-30
III. Conducting the Pursuit - A Small Unit Perspective.......................................2-30
V. Small Unit Offensive Tactical Tasks.........................................2-33
I. Breach............................................................................................................2-34
II. Defeat............................................................................................................2-34
III. Destroy.........................................................................................................2-34
IV. Seize.............................................................................................................2-34
e
V. Suppress.......................................................................................................2-35
VI. Support by Fire.............................................................................................2-35
VII. Clear............................................................................................................2-36
pl
VIII. Attack by Fire.............................................................................................2-38
VI. Actions on Contact...................................................................2-39
m
The
Chap 3
Defense
Sa
The Defense......................................................................................3-1
I. Purposes of the Defense..................................................................................3-2
II. Types of Defensive Operations........................................................................3-2
III. Characteristics of the Defense.......................................................................3-3
IV. Common Defensive Control Measures...........................................................3-4
V. Transition.........................................................................................................3-6
I. Area Defense..................................................................................3-7
I. Organization.....................................................................................................3-8
II. Forms of Defensive Maneuver........................................................................3-9
Defense In-Depth...........................................................................................3-9
Forward Defense............................................................................................3-9
II. Planning & Preparation..................................................................................3-10
III. Conducting the Area Defense - A Small Unit Perspective............................3-12
IV. Priorities of Work in the Defense..................................................................3-14
II. Mobile Defense...........................................................................3-15
I. Organization...................................................................................................3-16
A. The Fixing Force......................................................................................3-16
B. The Striking Force....................................................................................3-17
Table of Contents-3
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Train, Advise
Chap 4
& Assist e
Train, Advise & Assist......................................................................4-1
pl
Security Force Assistance (SFA).........................................................................4-2
I. Military Engagement, Security Cooperation & Deterrence.......4-5
II. Stability in Operations (Actions/Tasks/Efforts).........................4-7
m
I. Stability in Operations.......................................................................................4-7
Stability Operations (Army Definition)............................................................4-7
Stability Actions (Joint Definition).................................................................4-10
Stabilization Efforts.......................................................................................4-10
Sa
Chap 5
Enabling
Operations
I. Reconnaissance............................................................................5-1
Reconnaissance Objective..................................................................................5-1
I. Reconnaissance Fundamentals.......................................................................5-2
II. Organization....................................................................................................5-3
III. Planning & Preparation...................................................................................5-3
IV. Forms of the Reconnaissance........................................................................5-3
A. The Area Reconnaissance.........................................................................5-4
Single-Team Method.................................................................................5-4
Double-Team Method................................................................................5-5
Dissemination of Information.....................................................................5-5
B. The Route Reconnaissance.......................................................................5-6
Recon Push...............................................................................................5-7
Recon Pull.................................................................................................5-7
C. The Zone Reconnaissance........................................................................5-9
D. Reconnaissance in Force (RIF)...............................................................5-10
e
E. Special Reconnaissance.........................................................................5-10
II. Security Operations...................................................................5-11
pl
I. Security Operations Tasks.............................................................................. 5-11
Security Fundamentals................................................................................5-12
A. Screen..................................................................................................... 5-11
B. Guard.......................................................................................................5-14
C. Cover.......................................................................................................5-15
m
D. Area Security...........................................................................................5-17
* Local Security............................................................................................5-17
* Combat Outposts.......................................................................................5-17
II. Fundamentals of Security Operations...........................................................5-13
Sa
Table of Contents-5
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Chap 6
Special Purpose
Attacks
Special Purpose Attacks..................................................................6-1
I. Ambush..........................................................................................6-3
Near Ambush.................................................................................................6-4
Far Ambush....................................................................................................6-4
I. Organization.....................................................................................................6-5
A. Near Ambush.............................................................................................6-6
B. Far Ambush...............................................................................................6-8
II. Planning & Preparation....................................................................................6-9
A. Near Ambush...........................................................................................6-10
B. Far Ambush.............................................................................................6-10
III. Conducting the Ambush - A Small Unit Perspective..................................... 6-11
A. Near Ambush...........................................................................................6-12
B. Far Ambush.............................................................................................6-14
IV. Ambush Categories......................................................................................6-16
Deliberate.....................................................................................................6-16
e
Hasty............................................................................................................6-16
Area Ambush................................................................................................6-16
Point Ambush...............................................................................................6-16
pl
II. Raid..............................................................................................6-17
I. Organization...................................................................................................6-18
A. Security Team..........................................................................................6-18
m
B. Support Team...........................................................................................6-18
C. Assault Team...........................................................................................6-18
II. Planning & Preparation..................................................................................6-19
III. Conducting the Raid - A Small Unit Perspective...........................................6-20
Sa
6-Table of Contents
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Chap 7
Urban & Regional
Environments
Urban & Regional Environments (Overview).................................7-1
I. Urban Operations..........................................................................7-3
- Urban Operations (UO).....................................................................................7-4
- Understanding the Urban Environment.............................................................7-6
- Threat................................................................................................................7-8
I. Find...................................................................................................................7-3
II. Isolate the Building..........................................................................................7-3
Cordon.........................................................................................................7-10
III. Assault a Building.........................................................................................7-10
A. Entering a Building................................................................................... 7-11
B. Clearing Rooms.......................................................................................7-13
C. Moving in the Building.............................................................................7-14
IV. Follow Through.............................................................................................7-16
II. Fortified Areas............................................................................7-17
Characteristics...................................................................................................7-17
e
I. Find.................................................................................................................7-18
II. Fix..................................................................................................................7-18
III. Finish (Fighting Enemies in Fortifications)....................................................7-18
pl
A. Securing the Near and Far Side--Breaching Protective Obstacles..........7-18
B. Knocking out Bunkers..............................................................................7-19
C. Assaulting Trench Systems.....................................................................7-20
IV. Follow Through.............................................................................................7-22
m
III. Desert Operations.....................................................................7-23
I. Desert Environments......................................................................................7-23
II. Desert Effects on Personnel..........................................................................7-25
Sa
Table of Contents-7
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Chap 8
Patrols &
Patrolling
Patrols and Patrolling......................................................................8-1
Combat Patrols....................................................................................................8-1
Reconnaissance Patrols......................................................................................8-1
I. Organization of Patrols.....................................................................................8-2
II. Planning & Conducting a Patrol.......................................................................8-4
III. Elements of a Combat Patrol..........................................................................8-6
A. Assault Element.........................................................................................8-6
B. Support Element........................................................................................8-6
C. Security Element.......................................................................................8-6
I. Movement Techniques..................................................................8-7
I. Traveling...........................................................................................................8-8
II. Traveling Overwatch........................................................................................8-8
III. Bounding Overwatch......................................................................................8-9
II. Combat Formations....................................................................8-11
Fire Team Formations........................................................................................ 8-11
e
Primary Formations...........................................................................................8-12
I. The Line..........................................................................................................8-15
pl
II. The File..........................................................................................................8-16
III. The Wedge...................................................................................................8-18
III. Crossing a Danger Area............................................................8-21
I. Patch-to-the-Road Method.............................................................................8-22
m
II. Heart-Shaped Method...................................................................................8-24
III. Bypass Method.............................................................................................8-26
IV. Box Method..................................................................................................8-27
V. Crossing Large Open Areas..........................................................................8-27
Sa
8-Table of Contents
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Fundamentals
Tactical
Chap 1
I. The Art & Science
of Tactics
Ref: ADP 3-90, Offense & Defense (Jul ‘19), chap. 1.
I. Tactics
Tactics is the employment, ordered arrangement, and directed actions of forces
in relation to each other. ADP 3-90 is the primary publication for the offense and
defense at the tactical level. It is authoritative and provides guidance in the form of
combat-tested concepts and ideas modified to take advantage of Army and joint
capabilities. It focuses on the tactics used to employ current capabilities to prevail in
combat. Tactics are not prescriptive. Tacticians use creativity to develop solutions for
which enemy forces are neither prepared nor able to cope.
e
pl
m
Sa
Tactics, techniques, and procedures (TTP) provide commanders and staffs with the
fundamentals to develop solutions to tactical problems. (Dept. of Army photo by CPL
Gabrielle Weaver).
Tactics, Techniques, and Procedures (TTP)
Tactics always require judgment and adaptation to a situation’s unique circum-
stances. On the other hand, techniques and procedures are established patterns
or processes that can be applied repeatedly with little or no judgment to a variety of
circumstances. Tactics, techniques, and procedures (TTP) provide commanders and
staffs with the fundamentals to develop solutions to tactical problems. The solution
to any specific problem is a unique combination of these fundamentals, current TTP,
and the creation of new TTP based on an evaluation of the situation. Commanders
determine acceptable solutions by mastering doctrine and current TTP. They gain
this mastery through experiences in education, training, and operations.
ment, movement, and maneuver of combat elements in relation to each other and to
enemy forces to achieve assigned objectives. The strategic and operational levels of
warfare provide the context for tactical operations, and they are discussed in JP 3-0
and ADRP 3-0. Without this context, tactical operations may be reduced to a series
of disconnected actions.
Engagements
An engagement is a tactical conflict, usually between opposing, lower echelon
maneuver forces (JP 3-0). Brigades and lower echelon units generally conduct en-
gagements. Engagements result from deliberate closure with or chance encounters
between two opponents.
Battles
A battle consists of a set of related engagements that lasts longer and involves
larger forces than an engagement. Battles affect the course of a campaign or major
operation, as they determine the outcome of a division or corps echelon achieving
one or more significant objectives. Battles are usually operationally significant, if not
operationally decisive.
The outcomes of battles determine strategic and operational success and contribute
to the overall operation or campaign achieving a strategic purpose. The outcomes of
engagements determine tactical success and contribute to friendly forces winning a
battle.
Levels of Warfare
e
Echelons of command, sizes of units, types of equipment, or components do not
define the strategic, operational, or tactical levels of warfare. Instead, the level of
pl
warfare is determined by what level objective is achieved by the action. National
assets, including space-based and cyberspace capabilities previously considered
principally strategic, provide important support to tactical operations.
The levels of warfare help commanders visualize a logical nesting of operations,
m
allocate resources, and assign tasks to the appropriate echelon of command.
Advances in technology and a complex information environment compress time and
space relationships. This reality blurs the boundaries between the levels of warfare.
In a world of constant and immediate communication, a single event may affect all
Sa
Fundamentals
Tactical
Close Combat
Ref: ADP 3-0, Operations (Jul ‘19), p. 1-11.
The nature of close combat in land operations is unique. Combatants routinely come
face-to-face with one another in large numbers in a wide variety of operational environ-
ments comprising all types of terrain. When other means fail to drive enemy forces
from their positions, Army forces close with and destroy or capture them. The outcome
of battles and engagements depends on the ability of Army forces to close with enemy
forces and prevail in close combat. Close combat is warfare carried out on land in a
direct-fire fight, supported by direct and indirect fires and other assets. Units involved in
close combat employ direct fire weapons supported by indirect fire, air-delivered fires,
and nonlethal engagement means. Units in close combat defeat or destroy enemy forces
and seize and retain ground. Close combat at lower echelons contains many more inter-
actions between friendly and enemy forces than any other form of combat.
e
pl
m
Sa
Fundamentals
Tactical
Decisive Engagement. A decisive engagement is an engagement in which a unit is con-
sidered fully committed and cannot maneuver or extricate itself. In the absence of outside
assistance, the action must be fought to a conclusion with the forces at hand.
Defeat in Detail. Defeat in detail is achieved by concentrating overwhelming combat
power against separate parts of a force rather than defeating the entire force at once. A
smaller force can use this technique to achieve success against a larger enemy.
Economy of Force. Economy of force is the judicious employment and distribution of forces
to expend the minimum essential combat power on secondary efforts in order to allocate
the maximum possible combat power on primary efforts (JP 3-0). It is a principle of war.
Flanks. A flank is the right or left limit of a unit. For a stationary unit, flanks are desig-
nated in terms of an enemy’s actual or expected location. For a moving unit, the direction
of movement defines the flanks.
Mutual Support. Mutual support is that support which units render each other against an
enemy, because of their assigned tasks, their position relative to each other and to the
enemy, and their inherent capabilities (JP 3-31).
Operational Framework. An operational framework is a cognitive tool used to assist
commanders and staffs in clearly visualizing and describing the application of combat
power in time, space, purpose, and resources in the concept of operations (ADP 1-01).
Piecemeal Commitment. Piecemeal commitment is the immediate employment of units
in combat as they become available instead of waiting for larger aggregations of units to
ensure mass, or the unsynchronized employment of available forces so that their combat
e
power is not employed effectively. Piecemeal commitment subjects the smaller committed
forces to defeat in detail and prevents the massing and synchronizing of combat power
with following maneuver and sustainment elements. However, piecemeal commitment
pl
may be advantageous to maintain momentum and to retain or exploit the initiative.
Reconstitution. Reconstitution involves actions that commanders plan and implement
to restore units to a desired level of combat effectiveness commensurate with mission
requirements and available resources (ATP 3-21.20).
m
Reserve. While joint doctrine has three definitions for reserve, this definition applies to Army
tactical operations: A reserve is that portion of a body of troops that is withheld from ac-
tion at the beginning of an engagement, in order to be available for a decisive movement.
Sa
Rules Of Engagement (ROE). Rules of engagement are directives issued by competent mili-
tary authority that delineate the circumstances and limitations under which United States forces
will initiate and/or continue combat engagement with other forces encountered (JP 1-04).
Supporting Distance. Supporting distance is the distance between two units that can
be traveled in time for one to come to the aid of the other and prevent its defeat by an
enemy or ensure it regains control of a civil situation (ADP 3-0).
Supporting Range. Supporting range is the distance one unit may be geographically
separated from a second unit yet remain within the maximum range of the second unit’s
weapons systems (ADP 3-0).
Tactical Mobility. Tactical mobility is the ability of friendly forces to move and maneuver
freely on the battlefield relative to the enemy. Tactical mobility is a function of the relation-
ship between cross-country mobility, firepower, and protection. The terrain, soil condi-
tions, and weather affect cross country mobility.
Uncommitted Forces. An uncommitted force is a force that is not in contact with an en-
emy and is not already deployed on a specific mission or course of action. Commanders
use uncommitted forces to exploit success or avoid failure.
Weighting the Decisive Operation or Main Effort . The decisive operation is the opera-
tion that directly accomplishes the mission (ADP 3-0). Weighting the decisive operation or
the main effort is a basic tactical concept closely associated with the mass and maneuver
principles of war. The purpose for weighting the decisive operation or main effort is to
concentrate the effects of combat power at the most advantageous place and time.
Fundamentals
Tactical
Chap 1
II. The Army’s
Operational Concept
Ref: ADRP 3-0, Operations (Oct ‘17), chap. 1 and 3.
ADP 3-0 describes how the Army conducts operations as a unified action partner us-
ing the Army’s operational concept—a fundamental statement that frames how Army
forces, operating as part of a joint force, conduct operations (ADP 1-01). The Army’s
operational concept is unified land operations. ADP 3-0 discusses the foundations,
tenets, and doctrine of unified land operations, which serves as a common reference
for solving military problems in multiple domains and the framework for the range of
military operations across the competition continuum. It is the core of Army doctrine,
and it guides how Army forces contribute to unified action.
e
to conduct a fluid mix of offensive, defensive, and stability operations or DSCA simul-
taneously. Unified land operations acknowledges that strategic success requires fully
integrating U.S. military operations with the efforts of interagency and multinational
pl
partners. Army forces, as part of the joint force, contribute to joint operations through
the conduct of unified land operations. Unified land operations is the simultane-
ous execution of offense, defense, stability, and defense support of civil authorities
across multiple domains to shape operational environments, prevent conflict, prevail
m
in large-scale ground combat, and consolidate gains as part of unified action.
The goal of unified land operations is to establish conditions that achieve the JFC’s
end state by applying landpower as part of a unified action to defeat the enemy.
Unified land operations is how the Army applies combat power through 1) simultane-
Sa
ous offensive, defensive, and stability, or DSCA, to 2) seize, retain, and exploit the
initiative, and 3) consolidate gains. Military forces seek to prevent or deter threats
through unified action, and, when necessary, defeat aggression.
Decisive action begins with the commander’s intent and concept of operations.
Decisive action provides direction for an entire operation. Commanders and staffs
refine the concept of operations during planning and determine the proper allocation
of resources and tasks. Throughout an operation, they may adjust the allocation of
resources and tasks as conditions change.
Simultaneity
The simultaneity of decisive action varies by echelon and span of control. Higher
echelons generally have a broader focus than lower echelons when assigning re-
sponsibilities to subordinates. The higher the echelon, the greater the possibility that
all elements of decisive action occur simultaneously within its area of operations. At
lower echelons, an assigned task may require all the echelons’ combat power to ex-
ecute a specific task. For example, in some form a higher echelon, such as a corps,
always performs offensive, defensive, and stability or defense support of civil author-
ity operations simultaneously. Subordinate brigades perform some combination of
offensive, defensive, and stability operations, but they generally are more focused
by their immediate priorities on a specific element, particularly during large-scale
ground combat operations.
Unified land operations addresses combat with armed opponents amid populations.
This requires Army forces to shape civil conditions. Winning battles and engagements
is important, but it is not always the most significant task in a strategic context. Shaping
civil conditions with unified action partners is generally important to the success of all
campaigns, and thus it is a critical component of all operations.
e
Unified land operations span the entire competition continuum. They are conducted to
support all four Army strategic roles. The relative emphasis on the various elements of
pl
decisive action vary with the purpose and context of the operations being conducted.
m
Sa
The mission determines the relative weight of effort among the elements.
Ref: ADP 3-0, Operations (Jul ‘19), fig. 3-1. Decisive action.
Fundamentals
Tactical
Operations (Unified Logic Chart)
Ref: ADP 3-0, Operations (Jul ‘19), Introductory figure. ADP 3-0 unified logic chart.
e
pl
m
Sa
1. Offensive Operations
An offensive operation is an operation to defeat or destroy enemy forces and gain control
of terrain, resources, and population centers. Offensive operations impose the com-
mander’s will on an enemy.
The offense is the most direct
means of seizing, retaining, Offense
and exploiting the initiative to Types of Offensive Operations
gain a physical and psycho- • Movement to contact
logical advantage. In the of- • Attack
fense, the decisive operation • Exploitation
is a sudden action directed
toward enemy weaknesses • Pursuit
and capitalizing on speed, Purposes
surprise, and shock. If that • Dislocate, isolate, disrupt and destroy enemy
operation fails to destroy an forces
enemy, operations continue • Seize key terrain
until enemy forces are de- • Deprive the enemy of resources
feated. The offense compels
an enemy to react, creating
new or larger weaknesses the
e
• Refine intelligence
• Deceive and divert the enemy
pl
attacking force can exploit. • Provide a secure environment for stability
See pp. 4-2 to 4-3 and operations
SUTS2: The Small Unit Tactics
SMARTbook, 2nd Ed (ADP 3-90)
m
2. Defensive
Operations Defense
Types of Defensive Operations
A defensive operation is an
Sa
Fundamentals
Tactical
3. Stability Operations
A stability operation is an operation conducted outside the United States in coordination
with other instruments of national power to establish or maintain a secure environment
and provide essential governmental services, emergency infrastructure reconstruction,
and humanitarian relief. These operations support governance by a host nation, an
interim government, or a military government. Stability involves coercive and construc-
tive action. Stability helps in building relationships among unified action partners and
promoting U.S. security interests. It can help establish political, legal, social, and eco-
nomic institutions in an area while supporting transition of responsibility to a legitimate
authority. Commanders are
legally required to perform
Stability minimum-essential stabil-
Stability Operations Tasks ity operations tasks when
• Establish civil security controlling populated areas
• Establish civil control of operations. These include
• Restore essential services security, food, water, shelter,
and medical treatment.
• Support to governance
See pp. 4-4 to 4-5 and TAA2:
• Support to economic and infrastructure development
The Military Engagement,
• Conduct security cooperation
Security Cooperation &
Purposes
Stability SMARTbook, 2nd
• Provide a secure environment
Ed. (ADP 3-07)
• Secure land areas
• Meet the critical needs of the populace
• Gain support for host-nation government e 4. Defense
Support of Civil
pl
• Shape the environment for interagency and
host-nation success Authority
• Promote security, build partner capacity, and provide Defense support of civil au-
access thorities is support provided
m
• Refine intelligence by U.S. Federal military
forces, DOD civilians, DOD
contract personnel, DOD
Defense Support of Civil Authorities Component assets, and
Defense Support of Civil Authorities Tasks National Guard forces (when
Sa
• Mobility.
• Cross-domain fires.
• Tempo and convergence of effects.
• Protection.
• Sustainment.
• Information operations.
Army forces may be required to conduct operations across multiple domains to gain
freedom of action for other members of the joint force. Examples of these operations
include neutralizing enemy integrated air defenses or long-range surface-to-surface
fires systems, denying enemy access to an AO, disrupting enemy C2, protecting
friendly networks, conducting tactical deception, or disrupting an enemy’s ability to
conduct information warfare.
Fundamentals
Tactical
V. Operational Framework
An operational framework is a cognitive tool used to assist commanders and staffs
in clearly visualizing and describing the application of combat power in time, space,
purpose, and resources in the concept of operations (ADP 1-01). The operational
framework provides an organizing construct for visualizing and describing operations
by echelon in time and space within the context of an AO, area of influence, and
area of interest. It provides a logical architecture for determining the responsibilities,
permissions, and restrictions for subordinate echelons, and by doing so enables
freedom of action and unity of effort. When used in conjunction with effective opera-
tional graphics, it provides commanders the ability to provide intent, develop shared
visualization, and ultimately create the shared understanding necessary for the
exercise of initiative at every echelon.
The operational framework has four components. First, commanders are assigned
an AO for the conduct of operations, from which, in turn, they assign AOs to subor-
dinate units based on their visualization of the operation. Units should be assigned
AOs commensurate with their ability to influence what happens within them. Second,
within their assigned AO, commanders designate deep, close, support, and con-
solidation areas to describe the physical arrangement of forces in time, space, and
purpose. Third, commanders establish decisive, shaping, and sustaining operations
to further articulate an operation in terms of purpose. Finally, commanders desig-
nate the main and supporting efforts to designate the shifting and prioritization of
resources.
e
Within an AO, commanders use control measures to assign responsibilities, coordi-
nate fires and maneuver, and organize operations. To facilitate this integration and
pl
synchronization, commanders designate targeting priority, effects, and timing within
their AOs. Commanders assign subordinates responsibility for particular areas in
order to create freedom of action, generate rapid tempo, and best use available
combat power. Some capabilities, like cyberspace and information operations, can
potentially generate effects far outside assigned AOs for tactical units. When assign-
m
ing AOs, each headquarters ensures its subordinate headquarters’ capabilities align
with their span of control and missions. The way in which headquarters graphically
portray the operational framework and allocate resources to accomplish missions in
time and space drives the pace of operations. Higher echelon headquarters create
Sa
Fundamentals
Tactical
Chap 1
IV. Tactical Mission Tasks/
Taxonomy of Army Tactics
Ref: ADP 1-02, Terms and Military Symbols (Aug ‘18), chap. 1 and 9.
A tactical mission task is a specific activity performed by a unit while executing
a form of tactical operation or form of maneuver. A tactical mission task may be
expressed as either an action by a friendly force or effect on an enemy force.
The tactical mission tasks describe the results or effects the commander wants to
achieve. See following pages (pp. 1-30 to 1-31) for tactical mission tasks.
Not all tactical mission tasks have symbols. Some tactical mission task symbols will
include unit symbols, and the tactical mission task “delay until a specified time” will
use an amplifier. However, no modifiers are used with tactical mission task symbols.
Tactical mission task symbols are used in course of action sketches, synchronization
matrixes, and maneuver sketches. They do not replace any part of the operation order.
A. Mission Symbols
Counterattack A form of attack by part or all of a defending force
against an enemy attacking force, with the general
(dashed axis) objective of denying the enemy his goal in attacking
Area
Reconnaissance in force Troop Movement Staggered
Route Administrative movement Other Enabling Opera-
Special Approach march tions (Examples)
Zone Road march Information Operations
Security Encirclement (FM 3-13)
Screen Operations Mobility Operations
Guard (ATP 3-90.4)
Cover Countermobility Operations
Area (ATP 3-90.8)
Describe
Ref: ADP 5-0, The Operations Process (Jul ‘19), pp. 1-9 to 1-10.
A. Commander’s Intent
The commander’s intent is a clear and concise expression of the purpose of the operation
and the desired military end state that supports mission command, provides focus to the
staff, and helps subordinate and supporting commanders act to achieve the commander’s
e
desired results without further orders, even when the operation does not unfold as
planned (JP 3-0). During planning, the initial commander’s intent guides COA develop-
pl
ment. In execution, the commander’s intent guides initiative as subordinates make deci-
sions and take action when unforeseen opportunities arise or when countering threats.
Commanders develop their intent statement personally. It must be easy to remember and
clearly understood by commanders and staffs two echelons lower in the chain of com-
m
mand. The more concise the commander’s intent, the easier it is to understand and recall.
Fundamentals
Tactical
Always promulgated by a plan or order, commanders limit the number of CCIRs to focus
their staff and subordinate unit information collection and assessment efforts. The fewer
the CCIRs, the easier it is for staffs to remember, recognize, and act on each one. As
such, the rapid reporting of CCIRs to the commander is essential to adjusting operations.
CCIR falls into one of two categories: priority intelligence requirements (known as PIRs)
and friendly force information requirements (known as FFIRs).
e
mander considers most important. In coordination with the staff, the operations
officer manages friendly force information requirements for the commander.
pl
D. Essential Elements of Friendly
Information (EEFI)
m
failure, or limit success of the operation and therefore should be protected from en-
emy detection (ADP 6-0). Although essential elements of friendly information (known
as EEFIs) are not CCIRs, they have the same priority. Essential elements of friendly
information establish elements of information to protect rather than elements to collect.
Their identification is the first step in the operations security process and central to the
protection of information.
Fundamentals
VI. Troop Leading
Tactical
Chap 1
Procedures (TLP)
Ref: ATP 3-21.8, Infantry Platoon and Squad (Apr ‘16), app. A; ATP 3-21.10, Infantry
Rifle Company (May ‘18), app. B; and FM 6-0 (C2), Commander and Staff Organization
and Operations (Apr ‘16), chap. 10;
Troop leading procedures extend the MDMP to the small-unit level. The MDMP and
TLP are similar but not identical. They are both linked by the basic Army problem
solving methodology explained. Commanders with a coordinating staff use the
MDMP as their primary planning process. Company-level and smaller units lack for-
mal staffs and use TLP to plan and prepare for operations. This places the responsibil-
ity for planning primarily on the commander or small-unit leader.
e
pl
m
Sa
Leaders project their presence and guidance through troop leading procedures. TLP
is the process a leader goes through to prepare the unit to accomplish a tactical
mission. It begins when the mission is received. (Dept. of Army photo by 1LT Ryan
DeBooy).
Troop leading procedures are a dynamic process used by small-unit leaders to
analyze a mission, develop a plan, and prepare for an operation (ADP 5-0). These
procedures enable leaders to maximize available planning time while developing
effective plans and preparing their units for an operation. TLP consist of eight steps.
The sequence of the steps of TLP is not rigid. Leaders modify the sequence to meet
the mission, situation, and available time. Leaders perform some steps concurrently,
while other steps may be performed continuously throughout the operation.
Leaders use TLP when working alone or with a small group to solve tactical prob-
lems. For example, a company commander may use the executive officer, first
sergeant, fire support officer, supply sergeant, and communications sergeant to
assist during TLP.
e
pl
m
Sa
Ref: ATP 3-21.8, Infantry Platoon and Squad (Apr ‘16), fig. A-2.
Army leaders begin TLP when they receive the initial WARNO or perceive a new
mission. As each subsequent order arrives, leaders modify their assessments,
update tentative plans, and continue to supervise and assess preparations. In some
situations, the higher headquarters may not issue the full sequence of WARNOs;
security considerations or tempo may make it impractical. In other cases, Army lead-
ers may initiate TLP before receiving a WARNO based on existing plans and orders
(contingency plans or be-prepared missions), and an understanding of the situation.
Refer to BSS5: The Battle Staff SMARTbook, 5th Ed. for further
discussion. BSS5 covers the operations process (ADRP 5-0);
commander’s activities (Understand, Visualize, Describe, Direct,
Lead, Assess); the military decisionmaking process and troop leading
procedures (FM 6-0: MDMP/TLP); integrating processes and continuing
activities (IPB, targeting, risk management); plans and orders
(WARNOs/FRAGOs/OPORDs); mission command, command posts,
liaison; rehearsals & after action reviews; and operational terms & symbols.
Fundamentals
Tactical
1. Receive the Mission
In Step 1 of TLP, leaders determine their units’ missions and assess the time avail-
able to accomplish them. They can conduct an initial (light) analysis of the order
using METT-TC. They conduct detailed METT-TC analyses only after they issue the
first WARNORD (Step 2). Rarely will they receive their missions until after higher
command issues the third WARNORDs or the OPORDs themselves. However, in
the course of parallel planning, small-unit leaders already will have deduced their
tentative missions.
Leaders can receive their missions in several ways. They can get them in the form
of WARNORDs or, if higher chooses to wait for more information, an actual OPORD.
Sometimes higher chooses not to send WARNORDs, opting instead to wait and send
a full OPORD. Worst case, leaders receive new missions due to situational changes
occurring during the execution of a prior mission. In addition to receiving (or deduc-
ing) their missions during this step, the leaders must also—
• Assess the time available to prepare for and execute the mission.
• Prepare an initial timeline for planning and executing the mission.
• Conduct an initial planning-time analysis.
• Determine the total amount of time to plan and prepare.
• As planning continues, use the initial planning-time analysis to conduct a de-
tailed time analysis.
e
• Analyze the time his unit has available.
• Prepare an initial timeline.
pl
The most important element of the leader’s WARNORD is the initial timeline for plan-
ning. They also may convey other instructions or information they think will help their
subordinates prepare for the upcoming mission.
preparing, and executing the mission, they immediately issue WARNORDs to their
subordinates. By issuing the initial WARNORDs as quickly as possible, they enable
subordinates to begin their own planning and preparation (parallel planning) while
they begin to develop the OPORDs. When they obtain more information, they issue
updated WARNORDs, giving subordinates as much as they know.
Leaders can issue WARNORDs to their subordinates right after they receive higher
command’s initial WARNORDs. In their own initial WARNORDs, they include the
same elements given in their higher headquarters’ initial WARNORDs. If practical,
leaders brief their subordinate leaders face-to-face, on the ground. Otherwise, they
use a terrain model, sketch, or map.
See p. 1-54 for a sample Warning Order (WARNO) format.
The WARNORD follows the five-paragraph OPORD format and includes the follow-
ing items, at a minimum:
• Type of operation.
• General location of operation.
• Initial operational timeline.
• Reconnaissance to initiate.
• Movement to initiate.
• Planning and preparation instructions (to include planning timeline).
• Information requirements.
• Commander’s critical information
(Tactical Fundamentals) VI. Troop Leading Procedures 1-43
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Fundamentals
Tactical
A. Mission Analysis
The platoon leader begins mission analysis when receiving the mission. During mis-
sion analysis, the platoon leader—
• Restates the mission.
• Conducts an initial risk assessment.
• Identifies a tentative decisive point.
• Defines his own intent.
He conducts mission analysis to help him start developing his vision, and to confirm
what he must do to accomplish his mission. At the lower levels, leaders conduct their
mission analyses by evaluating METT-TC. He makes significant deductions about
the terrain, enemy, and own forces affecting operations. These significant deductions
drive the planning process and execution of operations. A leader must convey to his
subordinates the importance of these deductions, and effect they will have on the
e
units operations. In the end, the usefulness of mission analysis lies in recognizing
and capitalizing on opportunities. The answers to the following questions become
pl
inputs into developing a COA. Mission analysis has no time standard. A leader may
take as much time as needed, while still adhering to the one-third/two-thirds rule.
Mission analysis answers the four questions of the leader’s visualization:
• What is my mission?
m
• What is the current situation?
• How do we accomplish the mission?
• What are the risks?
Sa
METT-TC
Analyzing METT-TC is a continuous process. Leaders constantly receive informa-
tion, from the time they begin planning through execution. During execution,
their continuous analyses enable them to issue well-developed FRAGORDs.
They must assess if the new information affects their missions and plans. If so,
then they must decide how to adjust their plans to meet these new situations.
They need not analyze METT-TC in a particular order. How and when they do
so depends on when they receive information as well as on their experience and
preferences. One technique is to parallel the TLP based on the products received
from higher. Using this technique, they would, but need not, analyze mission first;
followed by terrain and weather; enemy; troops and support available; time avail-
able; and finally civil considerations.
See facing page for an overview and discussion of METT-TC.
Analysis of Mission
A mission is task and purpose clearly indicating the action to be taken and reason
for the action. In common usage, especially when applied to lower military units, a
mission is a duty or task assigned to an individual or unit. The mission is always the
first factor leaders consider and most basic question: What have I been told to do,
and why?
Fundamentals
Tactical
Chap 1 Tactical Fundamentals
e
pl
m
Sa
Refer to BSS5: The Battle Staff SMARTbook, 5th Ed. for further
discussion. BSS5 covers the operations process (ADRP 5-0);
commander’s activities (Understand, Visualize, Describe, Direct,
Lead, Assess); the military decisionmaking process and troop leading
procedures (FM 6-0: MDMP/TLP); integrating processes and continuing
activities (IPB, targeting, risk management); plans and orders
(WARNOs/FRAGOs/OPORDs); mission command, command posts,
liaison; rehearsals & after action reviews; and operational terms & symbols.
WARNORD/OPORD -
A Small Unit Perspective
Ref: ATP 3-21.8, Infantry Platoon and Squad (Apr ‘16), app. A.
e
pl
m
Sa
Ref: ATP 3-21.10, Infantry Rifle Company (May ‘18), fig. B-4. Company example
provided as it is more comprehensive than example provided in ATP 3-21.8.
The WARNORD follows the five-paragraph OPORD format and includes the following
items, at a minimum:
• Type of operation
• General location of operation
• Initial operational timeline
• Reconnaissance to initiate
e
The PCI is best achieved with a checklist. This keeps us from missing important key
equipment and situational awareness.
pl
Soldiers are inspected for what to bring and what not to bring. This will differ greatly de-
pending on their role in the patrol. Every military unit must be able to shoot, move, and
communicate. Those are the three basic Soldier skills. The PCI makes sure that each
Soldier can do this.
m
B. Communication Devices
• Check that extra batteries, antenna, mic, and basic radio kit are present
• Check that the radio is set to the proper channel and/or frequency
• Check the SOI/CEOI and ensure that each troop knows the call signs and code
• Check that all field phones are serviceable, clean, and in watertight containers
• Check for whistles, flares, color panels, and other communication devices
Fundamentals
Tactical
C. Weapon Systems
• Check that each weapon system is assigned to the appropriate troop
• Check that each weapon is serviceable, clean, and zeroed.
• Check that ammunition is serviceable and plentiful for each weapon
• Check that lubrication is present, as well as field cleaning kits
• Check optical devices (day and night) are serviceable
• Check that extra batteries are carried for optical devices
D. Specialty Equipment
• Check for first aid kits
• Check for protective gear—body armor, eye wear, kneepads, etc
• Check for screening smoke canisters
• Check for wire breaching/marking equipment if appropriate
• Check for mines/explosives if appropriate
• Check for anti-armor weapons if appropriate
• Check for rappelling/climbing/crossing gear if appropriate
e
• Check for pioneering tools if appropriate
E. Mission Knowledge
pl
Small unit leaders should conduct a confirmation brief after issuing the oral OPORD to
ensure subordinates know the mission, the commander’s intent, the concept of the opera-
tion, and their assigned tasks. Confirmation briefs can be conducted face-to-face or by
m
radio, depending on the situation. Face-to face-is the desired method, because all section
and squad leaders are together to resolve questions, and it ensures that each leader
knows what the adjacent squad is doing.
Sa
1. Commander’s Intent
• Check that each troop understands the mission purpose
• Check that each troop understands the key tasks we must achieve
• Check that each troop understands the end state of success
2. Mission Tasks
• Check that each troop understands the mission statement
• Check that each troop understands their assigned task(s)
• Check that each troop knows how to identify the enemy
• Check that each troop knows the expected light, weather, and terrain conditions
• Check that each troop knows where other friendly troops are located
• Check that each troop knows his leader, and SOI/CEOI information
e
plans with each other. A maneuver unit headquarters normally executes a combined
arms rehearsal after subordinate units issue their operation order. This rehearsal type
pl
helps ensure that subordinate commanders’ plans achieve the higher commander’s
intent.
C. Support Rehearsal
The support rehearsal helps synchronize each war fighting function with the overall
m
operation. This rehearsal supports the operation so units can accomplish their mis-
sions. Throughout preparation, units conduct support rehearsals within the framework
of a single or limited number of war fighting functions. These rehearsals typically
involve coordination and procedure drills for aviation, fires, engineer support, or
Sa
Fundamentals
Tactical
Chap 1
X. The After Action
Review (AAR)
Ref: FM 6-0 (C2), Commander and Staff Organization and Operations (Apr ‘16), chap.
16 and A Leader’s Guide to After Action Reviews (Aug ‘12).
e
pl
m
Sa
AARs are a key part of the training process, but they are not cure-alls for unit-
training problems. Leaders must still make on-the-spot corrections and take
responsibility for training soldiers and units. (Dept. of Army photo by Paolo Bovo).
Refer to BSS5: The Battle Staff SMARTbook, 5th Ed. for further
discussion. BSS5 covers the operations process (ADRP 5-0);
commander’s activities (Understand, Visualize, Describe, Direct,
Lead, Assess); the military decisionmaking process and troop leading
procedures (FM 6-0: MDMP/TLP); integrating processes and continuing
activities (IPB, targeting, risk management); plans and orders
(WARNOs/FRAGOs/OPORDs); mission command, command posts,
liaison; rehearsals & after action reviews; and operational terms & symbols.
Leaders must avoid creating the environment of a critique during AARs. Because
Soldiers and leaders participating in an AAR actively self-discover what happened
and why, they learn and remember more than they would from a critique alone.
A critique only gives one viewpoint and frequently provides little opportunity for
discussion of events by participants. Leaders make on-the-spot corrections and take
responsibility for training Soldiers and units.
A. Formal
m
Leaders plan formal after action reviews when they complete an operation or other-
wise realize they have the need, time, and resources available. Formal after action
reviews require more planning and preparation than informal after action reviews.
Formal after action reviews require site reconnaissance and selection; coordination
Sa
for aids (such as terrain models and large-scale maps); and selection, setup, mainte-
nance, and security of the after action review site. During formal after action reviews,
the after action review facilitator (unit leader or other facilitator) provides an overview
of the operation and focuses the discussion on topics the after action review plan
identifies. At the conclusion, the facilitator reviews identified and discussed key
points and issues, and summarizes strengths and weaknesses.
B. Informal
Leaders use informal after action reviews as on-the-spot coaching tools while re-
viewing Soldier and unit performance during or immediately after execution. Informal
after action reviews involve all Soldiers. These after action reviews provide immedi-
ate feedback to Soldiers, leaders, and units after execution. Ideas and solutions
leaders gathered during informal after action reviews can be applied immediately as
the unit continues operations. Successful solutions can be identified and transferred
as lessons learned.
Chap 2
The
Offense
Ref: ADP 3-90, Offense and Defense (Jul ‘19), chap. 3 and FM 3-90-1, Offense and
Offense
Defense, Vol. 1 (Mar ‘13), part one.
The
An offensive operation is an operation to defeat or destroy enemy forces and gain
control of terrain, resources, and population centers. Offensive operations impose
the commander’s will on an enemy. The offense is the most direct means of seizing,
retaining, and exploiting the initiative to gain a physical and psychological advan-
tage. In the offense, the decisive operation is a sudden action directed toward
enemy weaknesses and capitalizing on speed, surprise, and shock. If that operation
fails to destroy an enemy, operations continue until enemy forces are defeated. The
offense compels an enemy to react, creating new or larger weaknesses the attacking
force can exploit. (ADP 3-0)
e
pl
m
Sa
The offense is the ultimate means commanders have of imposing their will on enemy
forces. Commanders may also perform offensive tasks to deceive or divert an
enemy force, develop intelligence, or hold an enemy force in position. (USMC photo
by Pfc Rachel Porter).
An attacking force’s principal advantage is the initiative. Having the initiative allows
commanders to select the time, place, and methods used by attacking forces. An
attacking commander has the opportunity to develop a plan and concentrate the
capabilities of subordinate forces in a specific manner, location, and time that is
most disadvantageous to an enemy force. Commanders focus on attacking the
right combination of targets to accomplish the mission at the least cost. They create
exploitable opportunities through rapid, violently executed, and unpredictable attacks
that minimize an enemy force’s ability to respond.
A. Movement to Contact
Movement to contact is a type of offensive operation designed to develop the situa-
tion and to establish or regain contact. The goal of a movement to contact is to make
initial contact with a small element while retaining enough combat power to develop
Offense
The
the situation and mitigate the associated risk. A movement to contact creates favor-
able conditions for subsequent tactical actions. Commanders conduct a movement
to contact when an enemy situation is vague or not specific enough to conduct
an attack. A movement to contact may result in a meeting engagement. Meeting
engagements are combat actions that occur when an incompletely deployed force
engages an enemy at an unexpected time and place. Once an enemy force makes
contact, the commander has five options: attack, defend, bypass, delay, or withdraw.
Subordinate variations of a movement to contact include search and attack and
cordon and search operations.
See pp. 2-11 to 2-16.
B. Attack
An attack is a type of offensive operation that destroys or defeats enemy forces,
seizes and secures terrain, or both. Attacks incorporate coordinated movement sup-
e
ported by fires. They may be part of either decisive or shaping operations. A com-
mander may describe an attack as hasty or deliberate, depending on the time avail-
able for assessing the situation, planning, and preparing. A commander may decide
pl
to conduct an attack using only fires, based on an analysis of the mission variables.
An attack differs from a movement to contact because in an attack commanders
know at least part of an enemy’s dispositions. This knowledge enables commanders
to better synchronize and employ combat power.
m
See pp. 2-17 to 2-22.
spoiling attack. The commander’s intent and the mission variables guide which of
these variations of attack to employ. Commanders conduct each of these variations,
except for a raid, as either a hasty or a deliberate operation.
See pp. 6-1 to 6-30.
C. Exploitation
An exploitation is a type of offensive operation that usually follows a successful
attack and is designed to disorganize the enemy in depth. Exploitations seek to dis-
integrate enemy forces to the point where they have no alternative but to surrender
or retreat. Exploitations take advantage of tactical opportunities. Division and higher
echelon headquarters normally plan exploitations as branches or sequels.
See pp. 2-23 to 2-26.
D. Pursuit
A pursuit is a type of offensive operation designed to catch or cut off a hostile force
attempting to escape, with the aim of destroying it. There are two variations of the
pursuit: frontal and combination. A pursuit normally follows a successful exploita-
tion. However, if enemy resistance breaks down and enemy forces begin fleeing the
battlefield, any type of offensive operation can transition into a pursuit. Pursuits entail
rapid movement and decentralized control. Bold action and calculated initiative are
required in the conduct of a pursuit.
See pp. 2-27 to 2-32.
2-2 The Offense
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
The offense is the decisive form of war. The offense is the ultimate means command-
ers have of imposing their will on enemy forces. Commanders may also perform offen-
sive tasks to deceive or divert an enemy force, develop intelligence, or hold an enemy
Offense
force in position. Commanders seize, retain, and exploit the initiative when performing
The
offensive tasks. Specific operations may orient on an enemy force or terrain objective
to achieve a position of relative advantage. Taking the initiative from an enemy force
requires the performance of offensive tasks, even in the defense.
The main purpose of the offense is to defeat, destroy, or neutralize an enemy
force. Additionally, commanders perform offensive tasks to—
• Secure decisive terrain.
• Deprive the enemy of resources.
• Gain information.
• Deceive and divert an enemy force.
• Fix an enemy force in position.
• Disrupt an enemy force’s attack.
• Set the conditions for successful future operations.
e
The offense supports friendly operations in the air, maritime, space, and cyberspace
domains, and in the information environment. These operations destroy, dislocate,
pl
disintegrate, or isolate an enemy force.
Each battle or engagement has unique characteristics, such as the types of weapons,
degree of tactical mobility, and the influence of various capabilities across multiple
domains. The commanders most likely to enjoy tactical success are those able to
m
visualize the battlefield, understand the implications of existing friendly and enemy
dispositions, and take effective action first. Commanders maintain this momentum by
following up attacks quickly to deny enemy forces any opportunity to adjust or adapt
to the new situation. The tempo of friendly operations must be fast enough to prevent
Sa
the maneuvering force and the enemy. able to isolate it by controlling all ground
The commander generally chooses one lines of communications. An offensive
form on which he builds a course of action encirclement is typically an extension of
(COA). The higher commander rarely either a pursuit or envelopment. A direct
specifies the specific form of offensive ma- pressure force maintains contact with the
neuver. However, his guidance and intent, enemy, preventing his disengagement and
along with the mission that includes im- reconstitution. Meanwhile, an encircling
plied tasks, may impose constraints such force maneuvers to envelop the enemy,
as time, security, and direction of attack. cutting his escape routes and setting inner
and outer rings. The outer ring defeats
A. Envelopment enemy attempts to break through to his
The envelopment is a form of maneuver encircled force. The inner ring contains
in which an attacking force seeks to avoid the encircled force. All available means,
the principal enemy defenses by seizing including obstacles, should be used to
objectives to the enemy rear to destroy
the enemy in his current positions. At
the tactical level, envelopments focus on
e
contain the enemy. Then friendly forces
use all available fires to destroy him.
Encirclements often occur in nonlinear
pl
seizing terrain, destroying specific enemy offensive operations.
forces, and interdicting enemy withdrawal
routes. Envelopments avoid the enemy B. Turning Movement
front, where he is protected and can eas- A turning movement is a form of maneuver
m
ily concentrate fires. Single envelopments in which the attacking force seeks to avoid
maneuver against one enemy flank; the enemy’s principal defensive posi-
double envelopments maneuver against tions by seizing objectives to the rear and
both. Either variant can develop into an causing the enemy to move out of current
Sa
ENY
ENY
ENY
II. Attack
Ref: FM 3-90-1, Offense & Defense, Vol. 1 (Mar ‘13), chap 3; ATP 3-21.8, Infantry
Offense
The
Platoon and Squad (Aug ‘16), pp. 2-83 to 2-96; and ATP 3-21.10, Infantry Rifle
Company (May ‘18), pp. 2-114 to 2-186.
An attack is a type of offensive operation that destroys or defeats enemy forces,
seizes and secures terrain, or both. Attacks incorporate coordinated movement sup-
ported by fires. They may be part of either decisive or shaping operations. A com-
mander may describe an attack as hasty or deliberate, depending on the time avail-
able for assessing the situation, planning, and preparing. A commander may decide
to conduct an attack using only fires, based on an analysis of the mission variables.
An attack differs from a movement to contact because in an attack commanders
know at least part of an enemy’s dispositions. This knowledge enables commanders
to better synchronize and employ combat power. (ADP 3-90)
e
pl
m
Sa
The support team masses combat power to suppress enemy defenses while the
assault team moves forward. (Dept. of Army photo by SGT Allyson Manners).
Variations of the attack are ambush, counterattack, demonstration, feint, raid, and
spoiling attack. The commander’s intent and the mission variables guide which of
these variations of attack to employ. Commanders conduct each of these variations,
except for a raid, as either a hasty or a deliberate operation.
See chap. 6 for special purpose attacks (with emphasis on ambushes and raids).
I. Attack - Organization
The attack force breaks into two teams, the support team and the assault team. If the
enemy is specifically known to have prior warning to our attack and is known to have
the available resources to conduct spoiling attacks, the combat leader may also form
a security team for protecting the flanks from an enemy spoiling attack. Otherwise, the
attack uses just the support and assault teams.
Offense
The
e
pl
m
The assault team includes a breach team. The breach team has the job of moving
forward to neutralize the enemy’s obstacles. They use defilades and smoke to
Sa
A. Assault Team
The assault team includes an internal breach team that is tasked with the responsibility
of cutting a path through the enemy’s forward obstacles. This team typically consists of
a 2-man security team and a 2-man engineer team. The breach team carries special-
ized equipment for cutting through wire, neutralizing land mines, and marking the
path once they have created the breach in the enemy’s obstacles. In most cases, the
breach team will require ample amounts of smoke canisters to mask their activity.
B. Support Team
The support team employs mass casualty producing weapons and may also have an
internal sub-team to conduct a feign attack. The feign attack is coordinated to advance
at the same time as the breach team advances. The feign attack serves to pull atten-
tion away from the breach team to confuse the enemy as to the true location of the
main assault force.
Like the breach team, the feign attack team employs smoke canisters and high rates of
fire to make their attack look convincing—though the feign attack team does not attempt
to pass through enemy obstacles. Instead, the feign attack remains just outside the
enemy’s obstacles and conducts an attack by fire to augment the support team fires.
In the attack, the a small unit maneuvers along lines of least resistance using the terrain
for cover and concealment. This indirect approach affords the best chance to achieve
surprise on the enemy force. In the attack, the unit maneuvers along lines of least resis-
tance using the terrain for cover and concealment. This indirect approach affords the best
chance to achieve surprise on the enemy force.
e
march. This is the start of the attack. The attack will bypass any obstacles that have not
been specifically assigned—unless they present a threat. The attack force passes through
pl
danger areas maintaining attack formation. Only as large a force as necessary is exposed
to achieve each task. This conceals the size and intent of attack force.
5. Breach Obstacles
Using a defilade or similar cover, the assault’s breach team moves forward. If the support
team is not firing, the breach team uses stealth in approaching its objective. If suppres-
sive fires are already underway, the breach team employs smoke to mask their move-
ment. Simultaneously, the support team’s feign attack employs a smoke screen at another
point along the enemy’s defensive line and attacks by fire. This will confuse the enemy as
to the location of the breach team. The breach team uses visual tape during the day, or
lights at night, to mark the breach of the enemy’s obstacles.
Offense
The
e
Once the breach team opens a path through the enemy obstacles, the rest of the assault
pl
team moves forward to destroy key enemy positions. The support team coordinates
suppressive fires during this time. (Dept. of Army photo.)
the OPFOR suppressed and unable to form a counterattack. When the assault team
clears enough of the enemy positions, the assault leader signals for the support team
to move through the breach and join the assault team. Now the attack force assaults
assigned targets, such as the OPFOR CP and communications nodes, or the attack may
continue against the enemy’s exposed flanks.
IV. Pursuit
Ref: FM 3-90-1, Offense & Defense, Vol. 1 (Mar ‘13), chap 5 and ATP 3-21.10,
Offense
Infantry Rifle Company (May ‘18), p. 2-188.
The
A pursuit is a type of offensive operation designed to catch or cut off a hostile force
attempting to escape, with the aim of destroying it. There are two variations of the
pursuit: frontal and combination. A pursuit normally follows a successful exploita-
tion. However, if enemy resistance breaks down and enemy forces begin fleeing the
battlefield, any type of offensive operation can transition into a pursuit. Pursuits entail
rapid movement and decentralized control. Bold action and calculated initiative are
required in the conduct of a pursuit. (ADP 3-90)
e
pl
m
Sa
The pursuit seeks to find, fix, and finish a fleeing enemy force. To do this, an
enveloping force moves quickly forward along a parallel route of the escaping enemy
and suppresses the enemy in their escape routes. (Dept. of Army photo by SGT
William Begley).
A pursuit differs from the exploitation in that its primary function is to complete the
destruction of the targeted enemy force. Army doctrine regards a pursuit as an
offensive task. Pursuit operations begin when an enemy force attempts to conduct
retrograde operations. At that point, it becomes most vulnerable to the loss of internal
cohesion and complete destruction. An aggressively executed pursuit leaves the
enemy trapped, unprepared, and unable to defend, faced with the options of surren-
dering or complete destruction. Pursuits include the rapid shifting of units, continuous
day and night movements, hasty attacks, containment of bypassed enemy forces,
large numbers of prisoners, and a willingness to forego some synchronization to
maintain contact with and pressure on a fleeing enemy. Pursuits require swift maneu-
ver and attacks by forces to strike the enemy’s most vulnerable areas. A successful
pursuit requires flexible forces, initiative by commanders at all echelons, and a high
tempo during execution.
Unlike an exploitation, which may focus on seizing key or decisive terrain instead of
the enemy force, the pursuit always focuses on completing the destruction of fleeing
enemy forces by destroying their ability and will to resist. This is seldom accom-
plished by directly pushing back the hostile forces on their lines of communication
(LOCs). The commander in a pursuit tries to combine direct pressure against the
retreating forces with an enveloping or encircling maneuver to place friendly troops
across the enemy’s lines of retreat. This fixes the enemy in positions where the
enemy force can be defeated in detail. If it becomes apparent that enemy resistance
Offense
has broken down entirely and the enemy is fleeing the battlefield, any other offensive
The
I. Organization
Normally, the commander does not organize specifically for pursuit operations
ahead of time, although the unit staff may plan for a pursuit mission as a branch
e
or sequel to the current order. Therefore, the commander must be flexible to react
when the situation presents itself. Subordinate elements are made as self-sufficient
as resources will permit. The commander’s maneuver and sustainment forces
pl
continue their ongoing activities, while the commander readjusts priorities to better
support the pursuit. The commander requests and acquires additional support from
higher headquarters in accordance with the mission variables of METT-TC. For
most pursuits, the commander assigns subordinate forces security, direct-pressure,
m
encircling, follow and support, and reserve missions. The commander can assign
available airborne or air assault units the encircling mission because of their ability to
conduct vertical envelopments. Given sufficient resources, there can be more than
one force assigned the encirclement mission. The subordinate unit assigned the fol-
Sa
low and support mission polices the battlefield to prevent the dissipation of the com-
bat power of the unit assigned the direct-pressure mission. Appendix B addresses
the duties of a follow and support force. The reserve allows the commander to take
advantage of unforeseen opportunities or respond to enemy counterattacks.
There are two options in conducting a pursuit; each involves assigning a subordinate
the mission of maintaining direct-pressure on the rearward moving enemy force. The
first is a frontal pursuit that employs only direct-pressure. The second is a combina-
tion that uses one subordinate element to maintain direct-pressure and one or more
other subordinate forces to encircling the retrograding enemy. The combination
pursuit is generally more effective. Either the subordinate applying direct-pressure or
the subordinate conducting the encirclement can be conducting the decisive opera-
tion in a combination pursuit.
A. Frontal Pursuit
In a frontal pursuit, the commander employs only a single force to maintain direct-
pressure on the retrograding enemy by conducting operations along the same
retrograde routes used by that enemy. The commander chooses this option in two
situations. The first is when a subordinate force with a sufficient mobility advantage
to get behind a retrograding enemy force cannot be created. The second is when the
commander cannot provide enough resources to the force conducting the encircle-
ment to allow that force to survive and sustain itself until linkup with the direct-pres-
Chap 2
V. Small Unit Offensive
Tactical Mission Tasks
Ref: Adapted from ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), pp. 2-12 to
Offense
2-14 and FM 3-90-1, Offense and Defense, Vol. 1 (Mar ‘13), app. B.
The
Tactical mission tasks describe the results or effects the commander wants to achieve—
the what and why of a mission statement. The “what” is an effect that is normally mea-
surable. The “why” of a mission statement provides the mission’s purpose.This section
provides discussion and examples of some common actions and tasks the platoon
may perform during a movement to contact, a hasty attack, or a deliberate attack.
The following paragraphs are select tactical mission tasks that a platoon may receive
that are typically associated with offensive tasks. The situations used in this section
are examples only. For the complete list, refer to FM 3-90-1. They are not applicable
in every tactical operation, nor intended to prescribe specific method for achieving
the purpose of the operation.
Tactical mission tasks describe the results or effects the commander wants to
achieve - the what and why of a mission statement. For a more complete listing of
tactical mission tasks, see pp. 1-29 to 1-32.
I. Breach
A platoon may conduct a breach during an attack to break through or secure a pas-
sage through an enemy defense, obstacle, minefield, or fortification. A platoon can
participate in a hasty breach or participate as part of a larger unit during the conduct
of a deliberate breach. A deliberate breach requires a synchronized combined arms
operation.
II. Defeat
Offense
The
A platoon defeats an enemy force when the enemy force has temporarily or per-
manently lost the physical means or the will to fight. During a defeat, the defeated
force’s leader is unwilling or unable to pursue his adopted course of action, thereby
yielding to the friendly commander’s will. Also, he can no longer interfere with the
actions of friendly forces to a significant degree.
III. Destroy
A platoon destroys an enemy force when it physically renders an enemy force
combat-ineffective until it is reconstituted. A platoon can destroy an enemy force by—
• Executing an ambush where the entire enemy element is in the kill zone.
• Using surprise direct and indirect fire into an engagement area.
• Coordinating direct and indirect fires onto an objective.
• Massing indirect fires onto an unprepared enemy.
IV. Seize e
pl
A platoon has seized an objective when it physically occupies it and the enemy can
no longer place direct fire on it. A platoon may seize during either offensive or defen-
sive tasks. Examples include:
• A platoon seizes the far side of an obstacle as part of a company breach or
m
seizes a building to establish a foothold in an urban environment
• A platoon seizes a portion of an enemy defense as part of a company deliberate
attack
• A platoon seizes key terrain to prevent its use by the enemy
Sa
There are many inherent dangers in seizing an objective. They include the require-
ment to execute an assault, prepared enemy fires, a rapidly changing tactical
environment, and the possibility of fratricide when friendly elements converge. These
factors require the platoon leader and subordinate leaders to understand the follow-
ing planning considerations.
Developing a clear and current picture of the enemy situation is very important. The
platoon may seize an objective in a variety of situations, and the platoon leader will
often face unique challenges in collecting and disseminating information on the situ-
ation. For example, if the platoon is the seizing element during a company deliber-
ate attack, the platoon leader should be able to develop an accurate picture of the
enemy situation during the planning and preparation for the operation. He must be
prepared to issue modifications to the platoon as new intelligence comes in or as
problems are identified in rehearsals.
In another scenario, the platoon leader may have to develop his picture of the enemy
situation during execution. He must rely more heavily on reports from units in contact
with the enemy and on his own development of the situation. In this type of situa-
tion, such as when the platoon is seizing an enemy combat security outpost during
a movement to contact, the platoon leader must plan on relaying information as it
develops. He uses clear, concise FRAGOs to explain the enemy situation, and gives
clear directives to subordinates.
V. Suppress
A platoon or squad has suppressed an enemy when the enemy cannot prevent our
forces from accomplishing their mission. It is a temporary measure. The platoon can
use direct fire or call in indirect and obscuring fires. Units in support and attack by
fire positions often use suppressive fires to accomplish their mission. It is often used
by the platoon during an attack to—
• Allow further movement of friendly forces.
Offense
• Isolate an objective by suppressing enemy units in mutually supporting positions.
The
• Cover the dismounted assault element from the line of departure (LD) to the
objective.
During planning and preparation, the platoon leader should consider—
• Conducting a line-of-sight analysis during his terrain analysis to identify the
most advantageous positions from which to suppress the enemy
• Planning and integrating direct and indirect fires
• Determining control measures (triggers) for lifting, shifting, or ceasing direct
fires
• Determining control measures for shifting or ceasing indirect fires
• Planning and rehearsing actions on contact
• Planning for large Class V expenditures. (The company commander and the
platoon leader must consider a number of factors in assessing Class V require-
e
ments including the desired effects of the platoon direct fires; the composition,
disposition, and strength of the enemy force; and the time required to suppress
pl
the enemy.)
• Determining when and how the platoon will reload ammunition during the fight
while still maintaining suppression for the assaulting element
To accomplish this task, the platoon must maintain orientation both on the enemy
force and on the friendly maneuver element it is supporting. The platoon leader
should plan and prepare by—
• Conducting line-of-sight analysis to identify the most advantageous support-by-
fire positions
• Conducting planning and integration for direct and indirect fires
• Determining triggers for lifting, shifting, or ceasing direct and indirect fires
• Planning and rehearsing actions on contact
• Planning for large Class V expenditures, especially for the weapons squad
and support elements, because they must calculate rounds per minute. (The
platoon leader and weapons squad leader must consider a number of factors in
assessing Class V requirements, including the desired effects of platoon fires;
the time required for suppressing the enemy; and the composition, disposition,
and strength of the enemy force.)
A comprehensive understanding of the battlefield and enemy and friendly disposi-
tion is a crucial factor in all support-by-fire operations. The platoon leader uses all
available intelligence and information resources to stay abreast of events on the
battlefield. Additional considerations may apply. The platoon may have to execute
an attack to secure the terrain from where it will conduct the support by fire. The
initial support-by-fire position may not afford adequate security or may not allow the
platoon to achieve its intended purpose. This could force the platoon to reposition to
Chap 2
Offense
The
Actions on contact are a series of combat actions, often conducted simultaneously,
taken upon contact with the enemy to develop the situation. Leaders analyze the
enemy throughout TLP to identify all likely contact situations that may occur during
an operation. This process should not be confused with battle drills such as Battle
Drill “React to Contact.” Battle drills are the actions of individual Soldiers and small
units when they meet the enemy. Through planning and rehearsals conducted during
TLP, leaders and Soldiers develop and refine COA to deal with the probable enemy
actions. The COA becomes the foundation schemes of maneuver.
Actions on Contact e
pl
A Deploy and Report
B Evaluate and Develop the Situation
m
This five-step process is not intended to generate a rigid, lockstep response to the
enemy. Rather, the goal is to provide an orderly framework enabling the company
and its platoons and squads to survive the initial contact, and apply sound deci-
sionmaking and timely actions to complete the operation. Ideally, the unit sees the
enemy (visual contact) before being seen by the enemy; it then can initiate direct
contact on its own terms by executing the designated COA.
Once the lead elements of a force conducting movement to contact encounter the
enemy, they conduct actions on contact. The unit treats obstacles like enemy con-
tact, assuming the obstacles are covered by fire. The unit’s security force gains tacti-
cal advantage over an enemy by using tempo and initiative to conduct these actions,
allowing it to gain and maintain contact without becoming decisively engaged. How
quickly the unit develops the situation is directly related to its security, and the tempo
is directly related to the unit’s use of well-rehearsed SOP and drills.
Leaders understand properly executed actions on contact require time at the squad
and platoon levels. To develop the situation, a platoon or company may have to
(The Offense) VI. Actions on Contact 2-39
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Chap 3
The
Defense
Ref: ADP 3-90, Offense and Defense (Jul ‘19), chap. 4 and FM 3-90-1, Offense and
Defense, Vol. 1 (Mar ‘13), part two.
A defensive operation is an operation to defeat an enemy attack, gain time, econo-
mize forces, and develop conditions favorable for offensive or stability operations.
Normally the defense cannot achieve a decisive victory. However, it sets conditions
for a counteroffensive or a counterattack that enables forces to regain the initia-
tive. Defensive operations are a counter to an enemy offensive action, and they
seek to destroy as much of the attacking enemy forces as possible. They preserve
Defense
control over land, resources, and populations, and retain key terrain, protect lines of
The
communications, and protect critical capabilities against attack. Commanders can
conduct defensive operations in one area to free forces for offensive operations else-
where. (ADP 3-0)
e
pl
m
Sa
While the offensive element of combat operations is more decisive, the defense
is usually the stronger element. However, the performance of defensive tasks
alone normally cannot achieve a decision. (Dept. of Army photo by SSG Todd
Christopherson.)
A defending force does not wait passively to be attacked. A defending force aggres-
sively seeks ways of attriting and weakening enemy forces before close combat
begins. A defending force maneuvers to place enemy forces in a position of disad-
vantage and attacks those enemy forces at every opportunity. The static and mobile
elements of a defense combine to deprive enemy forces of the initiative. A defend-
ing force contains enemy forces while seeking every opportunity to transition to the
offense.
A defending force does not wait passively to be attacked. A defending force aggressive-
The
ly seeks ways of attriting and weakening enemy forces before close combat begins. A
defending force maneuvers to place enemy forces in a position of disadvantage and
attacks those enemy forces at every opportunity. The static and mobile elements of a
defense combine to deprive enemy forces of the initiative. A defending force contains
enemy forces while seeking every opportunity to transition to the offense.
See facing page for discussion of characteristics of the defense.
A. Area Defense
The area defense is a type of defensive operation that concentrates on denying en-
emy forces access to designated terrain for a specific time rather than destroying the
Sa
enemy outright. The focus of an area defense is on retaining terrain where the bulk
of a defending force positions itself in mutually supporting, prepared positions. Units
maintain their positions and control the terrain between the position of enemy forces
and the terrain they desire.
See pp. 3-7 to 3-14.
B. Mobile Defense
The mobile defense is a type of defensive operation that concentrates on the destruc-
tion or defeat of the enemy through a decisive attack by a striking force. The mobile
defense focuses on defeating or destroying enemy forces by allowing them to advance
to a point where they are exposed to a decisive counterattack by a striking force.
See pp. 3-15 to 3-20.
C. Retrograde
The retrograde is a type of defensive operation that involves organized movement
away from the enemy. An enemy force may compel these operations, or a com-
mander may perform them voluntarily. The higher echelon commander of a force ex-
ecuting a retrograde must approve the retrograde before its initiation. A retrograde is
not conducted in isolation. It is always part of a larger scheme of maneuver designed
to regain the initiative and defeat the enemy.
See pp. 3-21 to 3-24.
Defense
and concentrate effects.
regain the initiative from the attacking
E. Operations in Depth
The
enemy. The defending commander uses
the characteristics of the defense to help Operations in depth is the simultaneous
accomplish that task. (Dept. of Army application of combat power throughout
photo by 1LT Ryan DeBooy.) an area of operations. Commanders plan
their operations in depth. They create
A. Disruption conditions by disrupting enemy long-range
Defending forces seek to disrupt attacks fires, sustainment, and command and
by employing actions that desynchronize
an enemy force’s preparations. Disruption econtrol. These disruptions weaken enemy
forces and prevent any early enemy suc-
pl
actions include deceiving or destroying cesses. Operations in depth prevent en-
enemy reconnaissance forces, break- emy forces from maintaining their tempo.
ing up combat formations, separating In the defense, commanders establish
echelons, and impeding an enemy force’s a security area and the main battle area
(MBA) with its associated FEBA.
m
ability to synchronize its combined arms.
Defending forces conduct spoiling attacks
to deny an enemy force’s ability to focus
F. Preparation
Defending units prepare their AOs before
combat power. They counterattack to
attacking enemy forces arrive, or they
deny an enemy force the ability to exploit.
Sa
I. Area Defense
Ref: FM 3-90-1, Offense & Defense, Vol. 1 (Mar ‘13), chap 7; ATP 3-21.8, Infantry
Platoon and Squad (Aug ‘16), pp. 3-26 to 3-71; and ATP 3-21.10, Infantry Rifle
Company (May ‘18), chap. 3.
The area defense is a type of defensive operation that concentrates on denying en-
emy forces access to designated terrain for a specific time rather than destroying the
enemy outright. The focus of an area defense is on retaining terrain where the bulk
of a defending force positions itself in mutually supporting, prepared positions. Units
Defense
maintain their positions and control the terrain between the position of enemy forces
and the terrain they desire. The decisive operation focuses fires into engagement
The
areas, possibly supplemented by a counterattack. (ADP 3-90)
e
pl
m
Sa
The leader organizes the defending force to accomplish information collection, reconnais-
sance operations; security; main battle area; reserve; and sustainment missions. The lead-
er has the option of defending forward or defending in-depth. When the leader defends
forward within an area of operation, the force is organized so most of available combat
power is committed early in the defensive effort. To accomplish this, the leader may deploy
forces forward or plan counterattacks well forward in the main battle area or even beyond
the main battle area. If the leader has the option of conducting a defense indepth, security
forces and forward main battle area elements are used to identify, define, and control the
depth of the enemy’s main effort while holding off secondary thrusts. This allows the leader
to conserve combat power, strengthen the reserve, and better resource the counterattack.
Defense
The
e
pl
m
Sa
The defense makes use of obstacles to expose and/or slow the enemy advance in our
prepared engagement areas. Troops use of wire obstacles and mines in defilades that
cannot be covered by fire. (Dept. of Army photo by SGT Michael MacLeod.)
Security
The leader balances the need to create a strong security force to shape the battle with the
resulting diversion of combat power from the main body’s decisive operation The leader
usually allocates security forces to provide early warning and protect those forces, systems,
and locations necessary to conduct the decisive operation from unexpected enemy contact.
Reserve
The reserve is not a committed force. The leader can assign it a wide variety of tasks on
its commitment, and it must be prepared to perform other missions. In certain situations,
it may become necessary to commit the reserve to restore the integrity of the defense by
blocking an enemy penetration or reinforcing fires into an engagement area.
Defense In-Depth
Defense in-depth reduces the risk of the attacking enemy quickly penetrating the de-
fense. The enemy is unable to exploit a penetration because of additional defensive posi-
tions employed in-depth. The in-depth defense provides more space and time to defeat
Defense
the enemy attack.
The
The Infantry platoon uses a defense in-depth when—
• The mission allows the Infantry platoon to fight throughout the depth of the areas of
operations.
• The terrain does not favor a defense well forward, and better defensible terrain is
available deeper in the areas of operations.
• Sufficient depth is available in the areas operations.
e
• Cover and concealment forward in the areas of operations is limited.
• Weapons of mass destruction may be used.
pl
Forward Defense
The intent of a forward defense is to prevent enemy penetration of the defense. Due
to lack of depth, a forward defense is least preferred. The Infantry platoon deploys the
m
majority of its combat power into forward defensive positions near the forward edge of
the battle area. While the Infantry company may lack depth, the platoon and squads must
build depth into the defense at their levels. The leader fights to retain the forward posi-
tion, and may conduct counterattacks against enemy penetrations, or to destroy enemy
Sa
forces in forward engagement area. Often, counterattacks are planned forward of the
forward edge of the battle area to defeat the enemy.
The Infantry platoon uses a forward defense when—
• Terrain forward in the areas of operations favors the defense.
• Strong existing natural or man-made obstacles, such as river or a rail lines, are
located forward in areas of operations.
• The assigned area of operations lacks depth due to location of the area or facility to
be protected.
• Cover and concealment in rear portions of the areas of operations is limited.
• Directed by higher headquarters to retain or initially control forward terrain.
Defense
constituted with the bulk of available combat power. A fixing force is a force desig-
The
nated to supplement the striking force by preventing the enemy from moving from a
specific area for a specific time.A fixing force supplements a striking force by holding
attacking enemy forces in position, by canalizing attacking enemy forces into ambush
areas, and by retaining areas from which to launch the striking force. (ADP 3-90)
e
pl
m
Sa
A mobile defense focuses on destroying the attacking force by permitting the enemy
to advance into a position that exposes the enemy to counterattack and envelopment.
The commander retains the majority of available combat power in a striking force for
the decisive operation, a major counterattack. (Dept. of Army photo by Paolo Bovo.)
A division is the smallest unit that can conduct, versus participate in, a mo-
bile defense. Small units do not normally conduct a mobile defense because of
their inability to fight multiple engagements throughout the AO, while simultane-
ously resourcing striking, fixing, and reserve forces. Typically, the striking force in
a mobile defense may consist of one-half to two-thirds of the defender’s combat
power. Smaller units generally conduct an area defense or a delay as part of the
fixing force as the commander shapes the enemy’s penetration or they attack as
part of the striking force. Alternatively, they can constitute a portion of the reserve.
Chap 3
IV. Small Unit
Forms of the Defense
Ref: ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), pp. 3-41 to 3-51 and FM
3-90-1, Offense and Defense, Vol. 1 (Mar ‘13), pp. 6-21 to 6-29.
Though the outcome of decisive combat derives from offensive actions, leaders
often find it is necessary, even advisable, to defend. The general task and purpose
of all defensive operations is to defeat an enemy attack and gain the initiative for
offensive operations. It is important to set conditions of the defense so friendly forces
can destroy or fix the enemy while preparing to seize the initiative and return to the
Defense
offense. The platoon may conduct the defense to gain time, retain key terrain, facili-
The
tate other operations, preoccupy the enemy in one area while friendly forces attack
him in another, or erode enemy forces. A well coordinated defense can also set the
conditions for follow-on forces and follow-on operations.
II Perimeter Defense
Sa
The Infantry platoon usually defends using one of three forms of defense: defense
of a linear obstacle, perimeter defense, and reverse slope. The platoon also can de-
fend using a combination of these forms. (Refer to FM 3-90-1 for more information.)
Order of Events
Ref: ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), pp. 3-14 to 3-17.
Usually, as part of a larger element, the Infantry platoon conducts the defense perform-
ing several integrated and overlapping activities. The following paragraphs focus on the
tactical considerations and procedures involved in each activity. This discussion shows
an attacking enemy that uses depth in its operations, but there will be situations where
a platoon must defend against an enemy that does not have a doctrinal operational
foundation. The platoon must be prepared to defend against such threats. This uncon-
ventional (insurgent or terrorist force) enemy situation requires a more flexible plan
that allows for more responsive and decentralized control of combat power rather than
spreading it evenly throughout the platoon’s area of operation. The platoon also may
conduct ‘base-camp’ or perimeter defense along with offense and patrolling against ter-
rorist and insurgent forces.
Defense
The
As the platoon leader plans his defense, he generally follows this order of events:
• Reconnaissance and surveillance (R&S) operations and enemy preparatory fires.
• Occupation and preparation.
• Approach of the enemy main attack.
• Enemy assault.
• Counterattack.
• Consolidation and reorganization. e
pl
Reconnaissance and Security Operations and Enemy
Preparatory Fires
Security forces must protect friendly main battle area forces in order to allow them to
prepare their defense. These security forces work in conjunction with and complement
m
company and battalion security operations. The enemy will try to discover the defensive
scheme of maneuver using reconnaissance elements and attacks by forward detach-
ments and disruption elements. It also tries to breach the platoon’s tactical obstacles.
Sa
The security force’s goals normally include providing early warning, destroying enemy
reconnaissance units, and impeding and harassing enemy assault elements. The
security force continues its mission until directed to displace. The commander also may
use security forces in his deception effort to give the illusion of strength in one area while
establishing the main defense in another. While conducting this type of security opera-
tion, the Infantry platoon may simultaneously have to prepare battle positions, creating a
challenging time-management problem for the commander and his subordinate leaders.
During this activity, the Infantry platoon might be required to provide guides to pass the
security force and might be tasked to close the passage lanes. The platoon also may play a
role in shaping the battlefield. The platoon leader may position the platoon to deny likely en-
emy attack corridors to enhance flexibility and force enemy elements into friendly engage-
ment area. When it is not conducting security or preparation tasks, the platoon normally
occupies hide positions to avoid possible CBRN strikes or enemy artillery preparation.
detection and maintains combat power for the actual defense. Soldiers, at all levels of the
platoon, must thoroughly understand their duties and responsibilities related to the oc-
cupation; they must be able to execute the occupation quickly and efficiently to maximize
the time available for planning and preparation of the defense.
Enemy Assault
Defense
During an assault, the enemy deploys to achieve mass at a designated point, normally
The
employing assault and support forces. This may leave him vulnerable to the combined
effects of indirect and direct fires and integrated obstacles. The enemy may employ ad-
ditional forces to fix friendly elements and prevent their repositioning. Friendly counter-
attack forces might be committed against the enemy flank or rear, while other friendly
forces may displace to alternate, supplementary, or subsequent positions in support of the
commander’s scheme of maneuver. All friendly forces should be prepared for the enemy
to maximize employment of combat multipliers to create vulnerabilities. The enemy also is
e
likely to use artillery, CAS, and CBRN weapons to set the conditions for the assault.
The platoon engages the enemy. Squad leaders and team leaders control their Soldiers’
pl
direct fires. Destroyed vital positions are reoccupied. Soldiers move to alternate positions
if the primary positions become untenable. Casualties are evacuated. Mines, indirect fires
to include mortars are fired. Javelins and other direct fire weapons target the enemy’s
support positions.
m
Under limited visibility, selected mortars and field artillery units initially may fire infrared
illumination if the enemy has not identified the defenders’ positions. Once the platoon
engages the enemy from its primary positions, regular illumination is used. If the platoon
has overhead cover and the enemy penetrates the tactical wire, fires may include variable
Sa
Counterattack
As the enemy’s momentum slows or stops, friendly forces may conduct a counterattack.
The counterattack might be for offensive purposes to seize the initiative from the enemy.
In some cases, the purpose of the counterattack is mainly defensive such as reestablish-
ing a position or restoring control of the sector. The Infantry platoon may participate in the
counterattack as a base-of-fire elementʊproviding support by fire for the counterattack
forceʊor as the actual counterattack force.
Chap 4
Train, Advise
& Assist
Ref: ADP 3-07, Stability (Jul ‘19), chap. 3 and JP 3-20, Security Cooperation (May
‘17).
Train, Advise
and nongovernmental organizations, multinational partners, the private sector, and
the host nation.
& Assist
e
The recent announcement of “Advisory Brigades” by Army Chief of Staff Gen. Mark
A. Milley focuses on the need for specialized units to train and advise foreign forces.
pl
Called train, advise and assist brigades, the units would deploy to different combat-
ant command areas to help train allies and partners, similar to what units have been
doing in Iraq and Afghanistan. “I look at it as if you get a two-for,” Milley said. “You
get a day-to-day engagement that the combatant commanders want in order to train,
m
advise and assist. And then in time of national emergency, you have at least four or
five brigades with standing chains of command that can marry Soldiers up like the
old COHORT units.
Military engagement, security cooperation, and stability missions, tasks, and actions
encompass a wide range of actions where the military instrument of national power
is tasked to support OGAs and cooperate with IGOs (e.g., UN, NATO) and other
countries to protect and enhance national security interests, deter conflict, and set
conditions for future contingency operations. Use of joint capabilities in these and
related activities such as Security Force Assistance and Foreign Internal Defense
helps shape the operational environment and keep the day-to-day tensions between
nations or groups below the threshold of armed conflict while maintaining US global
influence.
See pp. 4-5 to 4-6 for discussion of military engagement, security cooperation and
deterrence. See pp. 4-7 to 4-14 discussion of stablity operations.
A Organize
Train, Advise
& Assist
B Train e
pl
C Equip
m
Foreign
Ref: FM security forces are
3-07.1, Security forces,
Force including pp.
Assistance, but 2-2
not limited
to 2-8. to, military, paramilitary,
police, and intelligence forces; border police, coast guard, and customs officials; and
prison guards and correctional personnel, that provide security for a host nation and its
relevant population or support a regional security organization’s mission. Security force
assistance activities are conducted primarily to assist host nations build the capacity to
defend against internal, external, and transnational threats to stability. However, DOD
may also conduct security force assistance to assist host nations to defend against exter-
nal threats; contribute to multinational operations; or organize, train, equip, and advise a
nation’s security forces or supporting institutions.
It is DOD policy that security force assistance is a subset of DOD overall security
cooperation initiatives and that security force assistance activities directly increase the
capacity or capability of FSF or their supporting institutions. Other forms of security force
assistance—specifically, advising in a hostile environment and other activities geared
toward assisting a partner nation engaged in conflict—are performed by U.S. forces
using resources and authorities specially provided to DOD for employment in support of
combat operations.
Security
Major Combat Deter/defeat
Cooperation Operations external threat
Title 22, USC –
Foreign Relations Foreign Internal Deter/defeat
Defense internal threat
FMS
IMET
FMF Counterinsurgency Defeat
Train, Advise
SFA insurgency
Title 10, USC – Activities
& Assist
Armed Forces
PEP
JCET Organize
e Counterterrorism Disrupt/defeat
terrorists
pl
PfP Unconventional Defeat enemy/
Warfare illegitimate
Train
authority
Other
Equip
Section 1206 Stability Operations Provide security
Section 1208
m
Rebuild/ and essential
Section 1033
services
Build
Federal Law
Enforcement Peace Operations Separate the
opponents
Title 28, USC
(DOJ, FBI) Maritime Security Provide security
Title 14, USC Operations in the maritime
(USCG) domain
Observation Posts
The observation post, the primary means of maintaining surveillance of an assigned
avenue or named areas of interest, is a position from where units observe the enemy
and direct and adjust indirect fires against him. From the observation post, platoons or
squads send SALUTE reports to their controlling headquarters when observing enemy
activity.
Observation posts can be executed either mounted or dismounted. As they are comple-
mentary, if possible they should be used in combination.
The main advantage of a dismounted observation post is it provides maximum stealth
hopefully preventing the enemy from detecting it. The two main disadvantages are it has
limited flexibility, taking time to displace and limited firepower to protect itself if detected.
Checkpoints
Train, Advise
As defined by ADRP 1-02 it is a predetermined point on the ground used to control move-
ment, tactical maneuver, and orientation. Checkpoints are primarily a military police task;
& Assist
e
however, while conducting area security, platoons or squads are frequently employed to
establish and operate checkpoints.
pl
Although similar, the checkpoint should not to be confused with a roadblock or block-
ing position. Roadblocks are designed to prevent all access to a certain area by both
wheeled and pedestrian traffic for a variety of purposes. The checkpoint also should not
be confused with an observation post which is established to collect information.
m
When conducting checkpoint operations, Soldiers need the following support:
• Linguists familiar with the local language and understand English.
• Host-nation police or a civil affairs officer.
Sa
• Wire/sandbags.
• Signs to reduce misunderstandings and confusion on the part of the local populace
• Lighting.
• Communications equipment.
• Handheld translation devices.
A checkpoint should consist of four areas:
• Canalization Zone. The canalization zone uses natural obstacles or artificial ob-
stacles to canalize the vehicles into the checkpoint.
• Turning Or Deceleration Zone. The search element establishes obstacles and
an overwatch force to control each road or traffic lane being blocked. The turning
or deceleration zone forces vehicles into making a rapid decision. The vehicle can
decelerate, make slow hard turns, or maintain speed and crash into a series of ob-
stacles. The road or traffic lanes should be blocked at either end of the checkpoint.
• Search Zone. The search zone is a relatively secure area where personnel and
vehicles are positively identified and searched. A decision is made to confiscate
weapons and contraband, detain a vehicle, or allow it to pass. The area is set up
with a blocking obstacle denying entry/exit without loss of life or equipment.
• Safe Zone. The safe zone is the assembly area for the checkpoint, which allows
personnel to eat, sleep, and recover in relative security.
Task Organization
The basic organization of a checkpoint includes a security element, a search ele-
ment, an assault element, and a mission command element. The actual strength and
composition of the force is determined by the nature of the threat, road layout, type of
checkpoint required, and anticipated number of vehicles to be processed.
Train, Advise
• Deny the enemy contact with the local inhabitants.
& Assist
e
• Dominate the area around the checkpoint. (This includes maintaining law and order
by local patrolling to prevent damage to property or injury to persons.)
pl
• Collect information.
Hasty Checkpoint
A hasty checkpoint differs from a deliberate checkpoint in it is not, in most cases, pre-
planned. A hasty checkpoint usually will be activated as part of a larger tactical plan or
m
in reaction to hostile activities such as a bomb, mine incident, or sniper attack, and can
be lifted on the command of the controlling headquarters. A hasty checkpoint always will
have a specific task and purpose. Most often used to avoid predictability and targeting
by the enemy. It should be set up to last from five minutes to up to two hours using an
Sa
ambush mentality. The short duration reduces the risk of the enemy organizing an attack
against the checkpoint. The maximum time suggested of the checkpoint to remain in
place would be about eight hours, as this may be considered to be the limit of endurance
of the units conducting the checkpoint and may invite the checkpoint to enemy attacks.
Characteristics of a hasty checkpoint include:
• Located along likely enemy avenues of approach.
• Achieve surprise.
• Temporary.
• Unit is able to carry and erect construction materiels without additional assistance.
• Uses vehicles as an obstacle between the vehicles and personnel, and reinforces
them with concertina wire.
• Soldiers are positioned at each end of the checkpoint.
• Soldiers are covered by mounted or dismounted automatic weapons.
• Assault force/response force is concealed nearby to attack or assault in case the
site is attacked.
The hasty checkpoint’s success is brought about by swift and decisive operations. In
many cases, there may be no clear orders before the checkpoint is set up. Leaders must
rely on common sense and instinct to determine which vehicles or pedestrians to stop for
questioning or searching. They are moved quickly into position, thoroughly conducted,
and just as swiftly withdrawn when lifted or once the threat has passed.
PO includes the five types of operations. Note: The US adopted the term peace opera-
tions while others such as the North Atlantic Treaty Organization (NATO) adopted the
term peace-support operations.
1. Peacekeeping Operations (PKO)
PKO consist of military support to diplomatic, informational, and economic efforts to
establish or maintain peace in areas of potential or actual conflict. PKO take place
following diplomatic negotiation and agreement among the parties to a dispute, the
sponsoring organization, and potential force-contributing nations. Before PKO begin, a
credible truce or cease fire is in effect, and the parties to the dispute must consent to
the operation. A main function of the PKO force is to establish a presence that inhibits
hostile actions by the disputing parties and bolsters confidence in the peace process.
Agreements often specify which nations’ forces are acceptable, as well as the size and
type of forces each will contribute.
2. Peace Enforcement Operations (PEO)
Peace enforcement operations (PEO) enforce the provisions of a mandate designed to
maintain or restore peace and order. PEO may include the enforcement of sanctions and
Train, Advise
exclusion zones, protection of personnel providing FHA, restoration of order, and forcible
& Assist
e
separation of belligerent parties. PEO may be conducted pursuant to a lawful mandate
or in accordance with international law and do not require the consent of the HN or the
parties to the conflict, although broad based consent is preferred. Forces conducting
pl
PEO use force or the threat of force to coerce or compel compliance with resolutions
or sanctions. Forces conducting PEO generally have full combat capabilities, although
there may be some restrictions on weapons and targeting.
3. Peace Building (PB)
m
PB consists of actions that support political, economic, social, and security aspects
of society. Although the major responsibility for PB is with the civil sector, early in PO,
when critical and immediate tasks normally carried out by civilian organizations tempo-
rarily exceed their capabilities, PO forces should assist and cooperate with the HN civil
Sa
sector, nongovernmental organizations (NGOs), and IGOs, to ensure that those tasks
are accomplished.
4. Peacemaking (PM)
Peacemaking is the process of diplomacy, mediation, negotiation, or other forms of
peaceful settlement that arranges an end to a dispute and resolves the issues that led
to the conflict. Military support to the peacemaking process includes military-to-military
relations, security assistance, or other activities, which influence disputing parties to
seek a diplomatic settlement. An example of military support to peacemaking was
the involvement of the Supreme Allied Commander Europe and the Joint Staff plans
directorate during the development of the Dayton Accords by the presidents of Bosnia,
Croatia, and Serbia outlining a General Framework Agreement for Peace in Bosnia
and Herzegovina.
5. Conflict Prevention
Conflict prevention employs complementary diplomatic, civil, and military means to
monitor and identify the causes of a conflict, and takes timely action to prevent the
occurrence, escalation, or resumption of hostilities. Chapter VI of the United Nations
(UN) Charter covers activities aimed at conflict prevention. Conflict prevention includes
fact-finding missions, consultations, warnings, inspections, and monitoring.
Refer to TAA2: Military Engagement, Security Cooperation & Stability SMARTbook
(Foreign Train, Advise, & Assist) chap. 4 for further discussion.
Chap 4
IV. Countering
Insurgencies (COIN)
Ref: JP 3-24, Counterinsurgency (Apr ‘18), chap. 1 and FM 3-24, Insurgencies and
Countering Insurgencies (May ‘14), chap. 1.
I. Insurgency
Insurgency is the organized use of subversion and violence to seize, nullify, or chal-
lenge political control of a region. An insurgency is a form of intrastate conflict, and
counterinsurgency (COIN) is used to counter it. The term insurgency can also refer to
the group itself. Insurgents can combine the use of terrorism; subversion; sabotage;
other political, economic, and psychological activities; and armed conflict to achieve
its aims. It is an organization political-military struggle by a predominantly indig-
enous group or movement designed to weaken, subvert, or displace the control of an
established government for a particular region. Each insurgency has its own unique
characteristics, but they typically include the following common elements: a strategy,
an ideology, an organization, a support structure, the ability to manage information,
Train, Advise
and a supportive environment.
& Assist
e
pl
m
Sa
Insurgencies will continue to challenge security and stability around the globe in the
21st century. While the possibility of large scale warfare remains, few nations are
likely to engage the US, allies, and partner nations. (Dept. of Army photo.)
I. Reconnaissance
Ref: ADP 3-90, Offense and Defense (Jul ‘19), pp. 5-1 to 5-2, and FM 3-90-2S,
Reconnaissance, Security, and Tactical Enabling Tasks, Vol. 2 (Mar ‘13), chap. 2.
e
pl
Operations
m
Enabling
Sa
Reconnaissance Objective
Commanders orient their reconnaissance assets by identifying a reconnais-
sance objective within an area of operations (AO). The reconnaissance objective
is a terrain feature, geographic area, enemy force, adversary, or other mission
or operational variable about which the commander wants to obtain additional
information. Every reconnaissance mission specifies a reconnaissance objective
that clarifies the intent of the effort, and prioritizes those efforts, by specifying
the most important information to obtain. Commanders assign reconnaissance
objectives based on priority information requirements resulting from the IPB
process and the reconnaissance asset’s capabilities and limitations. A reconnais-
sance objective can be information about a specific geographical location, such
as the cross country trafficability of a specific area, to confirm or deny a specific
activity of a threat, or to specify a specific location of a threat.
I. Reconnaissance Fundamentals
At this point the PL should know the specific recon mission and have received and
developed the maneuver control measures. Before delving into the execution of each
type of reconnaissance, it’s important to delineate the fundamentals of recon patrols.
There are seven rules to remember.
m
Enabling
exaggeration) and exactly what they do not see. A common mistake in reconnaissance
is the failure to report when no enemy force or presence is detected. Failing to report
does nothing for the commander. A report of negative activity gives the commander a
better understanding of where the enemy isn’t located, at least.
Sa
e
pl
Operations
m
Enabling
Sa
Depending on the length of route to be reconnoitered, the route recon may be conducted
with great stealth, or it may be conducted with great mobility. The effort is to gather
intelligence on the route and its conditions. (Dept. of Army photo by SGT Austan Owen).
e
pl
Operations
m
Enabling
Sa
A. Screen
Screen is a type of security operation that primarily provides early warning to the
protected force. (ADP 3-90) A unit performing a screen observes, identifies, and
reports enemy actions. Generally, a screening force engages and destroys enemy
reconnaissance elements in its capabilities— augmented by indirect fires—but
otherwise fights only in self-defense. The screen has the minimum combat power
necessary to provide the desired early warning, which allows the commander to re-
tain the bulk of the main body’s combat power for commitment at the decisive place
and time. A screen provides the least amount of protection of any security mission; it
does not have the combat power to develop the situation.
e
the factors of METT-TC. The security force that operates farthest from the main body
and offers more resistance provides more time and space to the main body. It attempts
to hinder the enemy’s advance by acting within its capabilities and mission constraints.
pl
3. Orient on the Force or Facility to Be Secured
The security force focuses all its actions on protecting and providing early warning to
the secured force or facility. It operates between the main body and known or sus-
Operations
m
pected enemy units. The security force must move as the main body moves and orient
Enabling
on its movement. The security force commander must know the main body’s scheme of
maneuver to maneuver his force to remain between the main body and the enemy. The
value of terrain occupied by the security force hinges on the protection it provides to the
main body commander.
Sa
e
air screen on the flank
m
gain time while preventing enemy ground observation of and direct fire against the
Enabling
main body. Units performing a guard cannot operate independently. They rely upon
fires, functional support, and multifunctional support assets of the main body. (ADP
3-90)
Sa
A guard differs from a screen in that a guard force contains sufficient combat power
to defeat, cause the withdrawal of, or fix the lead elements of an enemy ground force
before it can engage the main body with direct fire. A guard force routinely engages
enemy forces with direct and indirect fires. A screening force, however, primarily
uses indirect fires or close air support to destroy enemy reconnaissance elements
and slow the movement of other enemy forces. A guard force uses all means at its
disposal, including decisive engagement, to prevent the enemy from penetrating to
a position were it could observe and engage the main body. It operates within the
range of the main body’s fire support weapons, deploying over a narrower front than
a comparable-size screening force to permit concentrating combat power.
Operations
m
Enabling
Sa
Chap 6
Special Purpose
Attacks
Ref: ADP 3-90, Offense and Defense (Jul ‘19), p. 3-3 and FM 3-90-1, Offense and
Defense, Vol. 1 (Mar ‘13), pp. 3-23 to 3-31.
D Counterattack
E Demonstration
VI Feint
I. Ambush
An ambush is an attack by fire or other destructive means from concealed positions
on a moving or temporarily halted enemy. An ambush stops, denies, or destroys en-
emy forces by maximizing the element of surprise. Ambushes can employ direct fire
systems as well as other destructive means, such as command-detonated mines,
indirect fires, and supporting nonlethal effects.
See pp. 6-3 to 6-16 for further discussion of the ambush.
II. Raid
A raid is an operation to temporarily seize an area in order to secure information,
confuse an adversary, capture personnel or equipment, or to destroy a capabil-
ity culminating in a planned withdrawal (JP 3-0). Raids are usually small, involving
battalion-sized or smaller forces.
See pp. 6-17 to 6-22 for further discussion of the raid.
III. Counterattack
A counterattack is an attack by part or all of a defending force against an enemy
attacking force, for such specific purposes as regaining ground lost or cutting off or
destroying enemy advance units, and with the general objective of denying to the
enemy the attainment of the enemy’s purpose in attacking. In sustained defensive
actions, it is undertaken to restore the battle position and is directed at limited objec-
tives. The commander directs a counterattack—normally conducted from a defen-
sive posture—to defeat or destroy enemy forces, exploit an enemy weakness, such
as an exposed flank, or to regain control of terrain and facilities after an enemy suc-
cess. A unit conducts a counterattack to seize the initiative from the enemy through
offensive action.
See pp. 6-23 to 6-26 for further discussion of the counterattack.
e
while the enemy is in the process of forming or assembling for an attack. The objec-
tive of a spoiling attack is to disrupt the enemy’s offensive capabilities and timelines
while destroying targeted enemy personnel and equipment, not to seize terrain and
pl
other physical objectives. A commander conducts a spoiling attack whenever pos-
sible during the conduct of friendly defensive tasks to strike an enemy force while it
is in assembly areas or attack positions preparing for its own offensive operation or
is temporarily stopped. A spoiling attack usually employs armored, attack helicopter,
m
or fire support elements to attack enemy assembly positions in front of the friendly
commander’s main line of resistance or battle positions.
See pp. 6-27 to 6-28 for further discussion of the spoiling attack.
V. Demonstration
Sa
See pp. 6-29 to 6-30 for further discussion of demonstrations and feints.
Special
VI. Feint
A feint in military deception is an offensive action involving contact with the adver-
sary conducted for the purpose of deceiving the adversary as to the location and/or
time of the actual main offensive action (JP 3-13.4). A commander uses demonstra-
tions and feints in conjunction with other military deception activities. They generally
attempt to deceive the enemy and induce the enemy commander to move reserves
and shift fire support assets to locations where they cannot immediately impact the
friendly decisive operation or take other actions not conducive to the enemy’s best
interests during the defense. Both forms are always shaping operations. The com-
mander must synchronize the conduct of these forms of attack with higher and lower
echelon plans and operations to prevent inadvertently placing another unit at risk.
The principal difference between these forms of attack is that in a feint the com-
mander assigns the force an objective limited in size, scope, or some other measure.
Forces conducting a feint make direct fire contact with the enemy but avoid decisive
engagement. Forces conducting a demonstration do not seek contact with the enemy.
See pp. 6-29 to 6-30 for further discussion of demonstrations and feints.
I. Ambush
Ref: FM 3-90-1, Offense & Defense, Vol. 1 (Mar ‘13), pp. 5-23 to 5-27; TC 3.21-76,
Ranger Handbook (Apr ‘17), pp. 7-9 to 7-15; and ATP 3-21.8, Infantry Platoon and
Squad (Aug ‘16), p. 2-95.
An ambush is an attack by fire or other destructive means from concealed positions
on a moving or temporarily halted enemy (FM 3-90-1). An ambush stops, denies,
or destroys enemy forces by maximizing the element of surprise. Ambushes can
employ direct fire systems as well as other destructive means, such as command-
detonated mines, indirect fires, and supporting nonlethal effects. They may include
an assault to close with and destroy enemy forces. In an ambush, ground objectives
do not have to be seized and held.
e
pl
m
Sa
Purpose Atks
Special
Area ambushes trap the enemy in a network of attacks from multiple concealed
positions. These ambushes are carefully oriented to avoid “friendly fire” and yet
maximize combat power against the enemy. (Ref: FM 7-8, chap 3, fig. 3-15).
From a small unit perspective, how that is achieved and to what extent determines
the difference in employing either a near ambush or a far ambush.
Near Ambush
The near ambush has the expressed purpose of destroying the target. This often
requires an assaulting force to literally overrun the target after the initial volley of fire
has inflicted tremendous damage. Again, the intent is to destroy everything.
Since the patrol will overwhelm the target, the patrol will get as close as possible to
the enemy. This close proximity also means that friendly forces MUST outnumber
the enemy target.
e
pl
The near ambush has the express intent of overwhelming and destroying the enemy
m
force. The near ambush masses close to the kill zone and requires careful fire
coordination. The linear method offers the greatest simplicity. (Ref: FM 7-85, chap
6, fig. 6-1).
Sa
Far Ambush
The far ambush has only the purpose of injuring and/or delaying the target. This
rarely ever calls for an assaulting force—since the patrol doesn’t seek the complete
Purpose Atks
destruction of the enemy force there is no need to risk the loss of friendly troops. The
Special
I. Organization
A typical ambush is organized into three elements: assault, support, and security.
An ambush patrol will be broken into multiple teams, each with a very specific set of
responsibilities. The Infantry platoon is normally task-organized into assault, support,
and security elements for execution of the ambush.
Each team must be assigned a leader. The ambush will require special equipment
for each assigned team. This equipment should be made available for the rehearsal
as well, to ensure everything functions according to the execution plan. Each team
has a specific set of duties.
6-4 (Special Purpose Attacks) I. Ambush
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
to view it from the far right, far left, and his place as the leader of either the support
from the middle of the ambush formation. or the assault team, as determined in the
If the terrain is not suitable for a near operation order (OPORD). The PL will con-
Purpose Atks
II. Raid
Ref: FM 3-90-1, Offense & Defense, Vol. 1 (Mar ‘13), pp. 5-29 to 5-30; TC 3.21-76,
Ranger Handbook (Apr ‘17), pp. 7-16s to 7-17; and ATP 3-21.8, Infantry Platoon and
Squad (Aug ‘16), p. 2-96.
e
pl
m
Sa
Purpose Atks
Special
The raid has the same basic teams as the ambush—security, support, and assault.
The principle difference is that the raid is conducted on established, stationary
targets, whereas the ambush is used on moving or temporarily halted targets.
Raids are normally conducted in five phases. In the first phase the raiding force
inserts or infiltrates into the objective area. In the second phase the objective area is
then sealed off from outside support or reinforcement, to include enemy air assets.
In phase three any enemy forces at or near the objective are overcome in a violently
executed surprise attack using all available firepower for shock effect. In phase four
the force seizes the objective and accomplishes its assigned task quickly before any
surviving enemy in the objective area can recover or be reinforced. Lastly in phase
five the raiding force withdraws from the objective area and is extracted usually using
a different route than what was used for movement to the objective.
I. Organization
In a very similar manner as the ambush force, the raiding force breaks down into
three main elements: the security team, the support team, and the assault team.
1. Security Team
The security team is most commonly deployed to the left, right and sometimes rear
of the raiding formation as it is deployed around the objective. They carry rifles, light
machineguns, anti-personnel mines and possibly some anti-armor capabilities. Their
main purpose is to isolate the target, prevent any enemy reinforcements, and to seal
the escape of any enemy running from the objective.
2. Support Team
The support team is commonly deployed center of the raiding formation in such
a manner that they have a clear view of the objective. They carry heavier mass-
casualty producing weapons, such as machineguns, grenade launchers, or missiles.
This team is primarily responsible for the shock effect, as well as inflicting as many
casualties upon the enemy as possible to ensure the success of the assaulting team.
3. Assault Team
The assault team is deployed as closely to the objective as stealth and coordinated
e
fire support allow. They are lightly armed with rifles and carbines but may have spe-
cial equipment. This team is responsible for the destruction, capture, or liberation of
the target. Upon assaulting across the objective, they are also the most exposed—
pl
and least armed element of the raid.
m
Sa
Purpose Atks
Special
After the leader’s recon, the patrol leader leaves a 2-man security team overlooking
the objective from a concealed position. This position later becomes the release
point for the raid. The PL returns to the ORP to finalize plans. (Photo by Jeong,
Hae-jung).
Chap 7
Urban & Regional
Environments
Army doctrine addresses five regional environments: desert, cold, temperate, moun-
tain, and jungle. Another area of special consideration involves urban areas*.
Desert Operations
Arid regions make up about one-third of the earth’s land surface, a higher percent-
age than that of any other climate. Desert operations demand adaptation to the
environment and to the limitations imposed by terrain and climate. Success depends
on the an appreciation of the effects of the arid conditions on Soldiers, on equipment
and facilities, and on combat and support operations. FM 90-3/FMFM 7-27, Desert
Operations (Aug ‘93), is the Army and Marine Corps’ manual for desert opera-
Regional
Urban &
tions. It is the key reference for commanders and staff regarding how desert affects
personnel, equipment, and operations. It will assist them in planning and conducting
combat operations in desert environments.
See pp. 7-23 to 7-30.
Mountain Warfare and Cold Weather Operations (Apr ‘16), is the Army’s doctrinal
publication for operations in the cold region environment. This manual will enable
leaders, Soldiers, and Marines to accurately describe cold region environments, their
effects on military equipment, impacts these environments have on personnel, and
most importantly, how to employ the elements of combat power in cold region envi-
ronments. It provides the conceptual framework for conventional forces to conduct
cold region operations at operational and tactical levels.
See pp. 7-31 to 7-38.
Mountain Operations
With approximately 38 percent of the world’s landmass classified as mountains,
the Army must be prepared to deter conflict, resist coercion, and defeat aggres-
sion in mountains as in other areas. Throughout the course of history, armies have
been significantly affected by the requirement to fight in mountains. ATP 3-90.97,
Mountain Warfare and Cold Weather Operations (Apr ‘16), describes the tactics,
techniques, and procedures that the U.S. Army uses to fight in mountainous regions.
It provides key information and considerations for commanders and staffs regard-
ing how mountains affect personnel, equipment, and operations. It also assists
them in planning, preparing, and executing operations, battles, and engagements
in a mountainous environment. Army units do not routinely train for operations in a
mountainous environment. The jungle environment includes densely forested areas,
grasslands, cultivated areas, and swamps. Jungles are classified as primary or
secondary jungles based on the terrain and vegetation.
See pp. 7-39 to 7-46.
Jungle Operations
e
pl
Jungles, in their various forms, are common in tropical areas of the world—mainly
Southeast Asia, Africa, and Latin America. The climate in jungles varies with location.
Close to the equator, all seasons are nearly alike, with rains throughout the year;
m
farther from the equator, especially in India and Southeast Asia, jungles have distinct
wet (monsoon) and dry seasons. Both zones have high temperatures (averag-
ing 78 to 95+ degrees Fahrenheit), heavy rainfall (as much as 1,000 centimeters
[400+ inches] annually), and high humidity (90 percent) throughout the year. Severe
Sa
weather also has an impact on tactical operations in the jungle. FM 90-5, Jungle
Operations (Aug ‘93), is the Army’s field manual on jungle operations.
See pp. 7-47 to 7-54.
jungle operations.
In the associated graph (previous page), the “unit of control” is the higher command
element tasked to an operational objective. The “unit of action” refers to the unit
tasked to decisive engagement to achieve the operational objective. And the “unit of
maneuver” includes the units responsible for shaping operational success.
Chap 7
I. Urban
Operations
Ref: ATTP 3-06.11, Combined Arms Operations in Urban Terrain (Jun ‘11) and
TC 3.21-76, Ranger Handbook (Apr ‘17), chap. 11.
Infantry platoons conduct operations in urban areas using the same principles
applicable to other offensive operations. This section explains the general tactics,
techniques, and procedures used for a limited attack in an urban area.
e
pl
m
Sa
I. Find
The compartmentalized nature of urban terrain, limited observation and fields of
fire, and the vast amounts of potential cover and concealment mean that defenders
can disperse and remain undetected. The origin of enemy gunfire can be difficult to
Regional
Urban &
detect, because distance and direction become distorted by structures. The nature of
urban conflicts makes it more difficult for leaders to exercise command and control
verbally, and for Soldiers to pass and receive information. Situational understanding
is normally limited to the platoon’s immediate area.
The five essential components of the urban operational construct are described below.
Understand
Understanding requires the continuous assessment of the current situation and opera-
tional progress. Commanders use visualization, staffs use running estimates, and both
use the IPB process to assess and understand the urban environment. Commanders and
staffs observe and continually learn about the urban environment (terrain, society, and
infrastructure) and other mission variables. They use reconnaissance and security forces;
information systems; and reports from other headquarters, services, organizations, and
agencies. They orient themselves and achieve situational understanding based on a
common operational picture and continuously updated CCIR. The commander’s ability to
rapidly and accurately achieve an understanding of the urban environment contributes to
Regional
Urban &
Shape
Reconnaissance, security, and inform and influence activities are essential to successful
UO. These shaping operations set the conditions for decisive operations at the tactical
level in the urban area. Isolation, decisive action, minimum friendly casualties, and ac-
ceptable collateral damage distinguish success when the AO is properly shaped. Failure
to adequately shape the urban AO creates unacceptable risk. Urban shaping operations
may include actions taken to achieve or prevent isolation, understand the environment,
maintain freedom of action, protect the force, and develop cooperative relationships with
the urban population. Some shaping operations may take months to successfully shape
the AO.
Engage
In UO, the BCT engages by appropriately applying the full range of capabilities against
decisive points leading to centers of gravity. Successful engagements take advantage of
the BCT’s training; leadership; and, within the constraints of the environment, equip-
ment and technology. Engagement can be active or passive and has many components,
but it is characterized by maintaining contact with the threat and population to develop
the situation. Successful engagements also require the establishment of necessary
levels of control and influence over all or portions of the AO until responsibilities can be
transferred to other legitimate military or civilian control. Engagements may range from
the overwhelming and precise application of combat power in order to defeat an enemy
to large-scale humanitarian operations to HN security force assistance characterized by
information and influencing activities.
Consolidate
Forces consolidate to protect and strengthen initial gains and ensure retention of the
initiative. Consolidation includes actions taken to eliminate or neutralize isolated or
bypassed enemy forces (including the processing of prisoners and civilian detainees)
to increase security and protect lines of communications. It includes the sustainment
operations, rapid repositioning, and reorganization of maneuver forces and reconnais-
e
sance and security forces. Consolidation may also include activities in support of the
civilian population, such as the relocation of displaced civilians, reestablishment of law
and order, humanitarian assistance and relief operations, and restoration of key urban
pl
infrastructure.
Transition
When planning UO, commanders ensure that they plan, prepare for, and manage transi-
m
tions. Transitions are movements from one phase of an operation to another and may
involve changes in the type of operation, concept of the operation, mission, situation, task
organization, forces, resource allocation, support arrangements, or mission command.
Transitions occur in all operations. However, in UO, they occur with greater frequency
Sa
and intensity, are more complex, and often involve agencies other than U.S. military
organizations. All operations often include a transition of responsibility for some aspect of
the urban environment to (or back to) a legitimate civilian authority. Unless planned and
executed effectively, transitions can reduce the tempo of UO, slow its momentum, and
cede the initiative to the enemy.
include—
Urban &
• Time
• Distances
• Density
• Combat power
• Levels of war
• Decision making
Commanders and their staffs should carefully review ATTP 3-06.11 for techniques that
support tactical urban operations.
B. Clearing Rooms
Ref: TC 3.21-76, Ranger Handbook (Apr ‘17), pp. 8-18 to 8-21.
Although rooms come in all shapes and sizes, there are some general principles that
apply to most room clearing tasks. For clearing large open buildings such as hangars
or warehouses, it may be necessary to use subordinate units using a line formation
while employing traveling or bounding overwatch. These methods can effectively clear
the entire structure while ensuring security.
Room clearing techniques differ based on METT-TC, ROE, and probability of non-
combatants inside the building. If there are known or suspected enemy forces, but no
noncombatants inside the building, the platoon may conduct high intensity room clear-
ings. If there are known or suspected noncombatants within the building, the platoon
may conduct precision room clearings. High intensity room clearing may consist of
fragmentation grenade employment and an immediate and high volume of small arms
fire placed into the room, precision room clearing will not.
e
pl
m
Sa
• #1 Man. The #1 man enters the room from the entry point, and takes a position
and eliminates any immediate threat. that dominates his sector.
He can move left or right, moving along • #4 Man. The #4 man moves in the op-
the path of least resistance to a point of posite direction of the #3 man, clears the
domination—one of the two corners and doorway by at least 1 meter, and moves to
Regional
Urban &
continues down the room to gain depth. a position that dominates his sector.
• #2 Man. The #2 man enters almost Once the room is cleared, the team leader
simultaneously with the first and moves in may order some team members to move
the opposite direction, following the wall. deeper into the room overwatched by the
The #2 man must clear the entry point, other team members. The team leader
clear the immediate threat area, and must control this action. In addition to
move to his point of domination. dominating the room, all team members
• #3 Man. The #3 man simply moves are responsible for identifying possible
in the opposite direction of the #2 man loopholes and mouseholes. Cleared
inside the room, moves at least 1 meter rooms should be marked IAW unit SOP.
Chap 7
III. Desert
Operations
Ref: FM 90-3 (FMFM 7-27), Desert Operations (Aug ‘93).
I. Desert Environments
By definition, a desert region receives less than 10 inches (25cm) of rainfall annually.
There are 22 deserts covering 30 percent of the earths’ landmass. The largest non-
polar desert is the Sahara that covers the northern half of the African continent, an
area larger than the entire contiguous 48 states of America. The word desert comes
from Latin desertum meaning “an abandoned place.” Though admittedly sparse,
both large and small cities are distributed across the deserts of the world. Human
population in the desert centers on fresh water sources, oil reserves, and seaports.
e
pl
m
Sa
During the rainy season it is not uncommon to see temperature lows at or near
freezing, 32oF (0oC) during the night. Daily highs during the rainy season may not
get much above 50oF (10oC).
However, rainy seasons are the exception in the desert. Most of the year the desert
is blistering hot with daily high temperatures soaring up to and even beyond 130oF
(54oC). Nightly lows can plummet 40oF (22oC) from the daily high in just a matter of
a couple hours, causing high winds. This is due to the lack of substantial vegetation
and the arid soil’s inability to retain heat.
C. Impact on Mobility
Roadways are more easily established in rocky deserts. Off-road travel by both
Regional
vehicle and foot is easily achieved, the heat and lack of water not withstanding.
Urban &
Visibility in the desert extends for miles. Given the tendency to employ armored
vehicles for their relative speed and overwhelming firepower, the trade off is that
e
stealth is difficult to achieve. Armored formations result in plumes of dust that can
be seen over very long distances. (Dept. of Defense photo by Cecillio Ricardo).
pl
II. Desert Effects on Personnel
The weather and terrain of the desert have a very tangible impact on operations,
with the most significant factor being extreme heat. The human body’s demand for
m
water is enormous under these conditions.
Consider that working troops may need to as much as 4 gallons (15 liters) of drinking
water per day. Combat units calculate another 2.5 gallons (9.5 liters) per individual
for cooking and cleaning. At 6.5 gallons (24.5 liters) per individual, a company of
Sa
140 troops would consume a total of 910 gallons (3,444 liters) each day, at a weight
of 7,600 lbs. Commanders must also consider the load weight imposed by the
requirement for water during desert operations.
avoid severe sunburn, the uniforms are made of a very light, tough material such
as Ripstop in either 65/35 nylon-cotton or 100 percent poplin. Uniforms are worn
loosely. Specialty items are necessary for troop comfort in the desert. Without such
items, routine injury can exacerbate to more severe injury. These items include:
• Sun and wind goggles to keep dust out of the eyes
• Suede-out leather mechanic type gloves to protect from hot surfaces
• Knee pads protect against injuries in rocky deserts
• Full brim “Boonie” hats keep the sun off the face and neck
• Scarves to cover the nose and mouth from inhaling dust
• Sweat rags or cooling bandanas kept wet around the neck
Chap 7
V. Mountain
Operations
Ref: ATP 3-90.97, Mountain Warfare and Cold Weather Operations (Apr ‘16) and
adaptations from FM 3-97.6 (90-6), Mountain Operations (Nov ‘00).
I. Mountain Environments
Mountain weather can vary sharply and has enormous implications for tactical mis-
sions. Erratic weather conditions from extreme cold to hot temperatures, extremely
arid to periods of considerable precipitation, and from calm to violent winds dictate a
wider variety of combat troop equipment and uniforms, placing greater demand on
unit logistical requirements.
e
pl
m
Sa
A. Temperatures
Generally, mountain temperatures decrease approximately 5 degrees for every one
thousand feet (300 meters) increased in altitude. This varies of course depending
Regional
Urban &
on air humidity. Furthermore, during periods of cloud overcast the temperatures may
counter-intuitively become warmer than during periods of clear sky. This phenom-
enon is referred to as inversion.
Normal daytime to nighttime temperatures will vary 40 degrees in the mountains.
Where there are no forest canopies, the temperature variation in the mountains can
vary at even greater extremes.
Extreme temperatures have marginal effect on weapon ballistics, but create a
greater demand on weapon maintenance as the moving parts can become frozen
with ice and snow. In rare but specific weather and humidity conditions, small arms
fire will leave frozen vapor trails behind the bullet, disclosing the firing position of
both friendly and enemy troops.
(Urban & Regional Environments) V. Mountain Operations 7-39
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Chap 7
VI. Jungle
Operations
Ref: FM 90-5, Jungle Operations (Aug ‘82).
I. Jungle Environments
The word jungle comes from Sanskrit jangala, meaning “wasteland.” Today the word
jungle encompasses any climate with year-round warm temperatures, moderate to
extreme rainfall, and dense vegetation. This includes three distinct climate zones –
the equatorial tropics, tropical regions, and subtropical regions.
e
pl
m
Sa
In general small arm weapons perform very well in jungle environments. Weapons
require regular maintenance and a constant coat of protective oil. Combat
troops should be trained in close quarter marksmanship in anticipation of enemy
engagement at very short distances. (Dept. of Defense photo by Brian J. Slaght).
Jungle environments present unique challenges for military operations and yet
because such a large percentage of the world’s population lives in and around the
jungle, an ability to conduct military operations in the jungle is essential. Fortunately,
the US military has a long history of jungle operations all over the globe from which
Regional
Urban &
Vegetation
pl
The jungle climate is covered with dense
vegetation. This includes rainforests and
deciduous forest, but also includes grass-
lands called savannahs.
m
• Rainforests – mature forests with
trees growing as tall 200 feet (60m)
Dismounted patrolling remains the only and multiple canopy layers that leave
viable option for imposing force in jungle a dark rotten floor with no under-
Sa
operations. US Marines patrol the jungles growth. The canopy ceiling can be
of Columbia. (Dept. of Defense photo by 25 feet (8m) above the ground.
Brian J. Slaght). • Deciduous Forests – new growth or
mature forests with trees commonly
Terrain Formations reaching 65 feet (20m) high. These
Farmable plains in jungle regions are forests typically have just one upper
regarded at a premium, especially when canopy that allows sunlight to the
low altitude mountains are present. As forest floor that may in spots produce
such flat land is commonly cultivated into a thick underbrush canopy.
expansive open fields of rice paddies, • Savannahs – treeless grassland
cane fields, and fruit tree plantations with broadleaf grasses that grow
Regional
Chap 8
Patrols &
Patrolling
Ref: ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), chap. 6 and TC 3.21-76,
Ranger Handbook (Apr ‘17), chap. 7.
The two categories of patrols are combat and reconnaissance. Regardless of the
type of patrol being sent out, the commander must provide a clear task and purpose
to the patrol leader. Any time a patrol leaves the main body of the unit there is a pos-
sibility that it may become engaged in close combat.
e
pl
m
Sa
Patrol missions can range from security patrols in the close vicinity of the main
body, to raids deep into enemy territory. Successful patrolling requires detailed
contingency planning and well-rehearsed small unit tactics. The planned action
determines the type of patrol. (USMC photo by Sgt Kirstin Merrimarahajara.)
Combat Patrols
Patrols that depart the main body with the clear intent to make direct contact with
the enemy are called combat patrols. The three types of combat patrols are raid
patrols, ambush patrols (both of which are sent out to conduct special purpose
attacks), and security patrols.
Reconnaissance Patrols
Patrols that depart the main body with the intention of avoiding direct combat with
the enemy while seeing out information or confirming the accuracy of previously-
gathered information are called reconnaissance patrols. The most common types
reconnaissance patrols are area, route, zone, and point. Leaders also dispatch
reconnaissance patrols to track the enemy, and to establish contact with other
friendly forces. Contact patrols make physical contact with adjacent units and
report their location, status, and intentions. Tracking patrols follow the trail and
movements of a specific enemy unit. Presence patrols conduct a special form of
Patrolling
Patrols &
I. Organization of Patrols
A patrol is organized to perform specific tasks. It must be prepared to secure itself,
navigate accurately, identify and cross danger areas, and reconnoiter the patrol objective.
If it is a combat patrol, it must be prepared to breach obstacles, assault the objective,
and support those assaults by fire. Additionally, a patrol must be able to conduct detailed
searches as well as deal with casualties and prisoners or detainees.
The leader identifies those tasks the patrol must perform and decides which elements will
implement them. Where possible, he should maintain squad and fire team integrity.
e
pl
m
Sa
Squads and fire teams may perform more than one task during the time a patrol is away
from the main body or it may be responsible for only one task. The leader must plan
carefully to ensure that he has identified and assigned all required tasks in the most
efficient way. (Dept. of Army photo by SGT Michael MacLeod.)
is designated as the patrol leader. This temporary title defines his role and responsibilities
Patrols &
for that mission. The patrol leader may designate an assistant, normally the next senior
man in the patrol, and any subordinate element leaders he requires.
A patrol can consist of a unit as small as a immediately behind the pointman. Addition-
fire team. Squad- and platoon-size patrols ally, a secondary compass and pace team
are normal. Sometimes, for combat tasks is usually located in the back half of the
such as a raid, the patrol can consist of patrol.
most of the combat elements of a rifle com-
pany. Unlike operations in which the Infantry 4. Command Team
platoon or squad is integrated into a larger The PL and a radio operator (RTO) make
organization, the patrol is semi-independent up the command team for most patrols.
and relies on itself for security. Doctrinally speaking, the APL is also part of
this team but the APL is normally posi-
Every patrol is assigned specific tasks. tioned near the very rear of the formation
Some tasks are assigned to the entire to help the dragman and ensure no patrol
patrol, others are assigned to subordinate member is left behind.
teams, and finally some are assigned to
each individual. An individual will have 5. Aid & Litter Team
multiple tasks and subtasks to consider and Someone has to help pull wounded bud-
carry out. dies out of harms way. There are usually
two members of each fire team designated
1. Pointman, Dragman, and as aid and litter teams. These teams are
Security Team spread throughout the patrol and have the
Security is everyone’s responsibility. Having responsibility of carrying and employing
noted that, every patrol has a troop walking extra medical aid gear.
in front. This troop is called the pointman.
6. Enemy Prisoner of War
He is responsible for making sure the patrol
does not walk into enemy ambushes, mine-
fields, or similar. The pointman has forward
e(EPW) Search Team
EPW teams are responsible for controlling
pl
security. Sometimes a patrol will send the enemy prisoners IAW the five S’s and the
pointman with another patrol member to leader’s guidance. These teams may also
walk a short distance forward of the patrol. be responsible for accounting for and con-
trolling detainees or recovered personnel.
m
Also, every patrol has someone who is last
in the formation. This troop is called the
dragman. He is responsible for making sure 7. Tracking Team
that no patrol members are left behind. He There are many different specialty teams
also makes sure that the enemy doesn’t that might be assigned to a patrol. Track-
Sa
surprise the patrol from the rear unnoticed. ers are just one such resource. Explosive
ordinance details (EOD) are another.
The security team is responsible for specifi- Trackers are unique, however, because
cally pulling security to the left and right they are generally positioned just ahead of
of the patrol. This is a critical task when the pointman on the patrol.
crossing danger areas, so a specific team is
identified to conduct this task. 8. Support Team
2. Clearing Team The support team is outfitted with heavy,
The clearing team crosses the danger area crew-served weapons on the patrol. Of
once the security team is in place. The course, reconnaissance patrols usually
clearing team has the specified respon- do not make use of a support team. But
sibility of visually clearing and physically when a support team is required, it will be
securing the far side of a danger area. It’s positioned to the center of the patrol.
important so another team is designated to
conduct this task.
9. Assault & Breach Team
Reconnaissance rarely ever needs an
3. Compass & Pace Team assault team. The assault team may be
Obviously someone needs to make sure the dispersed throughout the patrol, but ideally
patrol is headed in the right direction and is situated toward the rear. This is because
Patrolling
Patrols &
that we don’t travel too far. This is the job of the assault team is typically placed on the
the compassman and paceman. Typically objective last.
the compass and pace team is positioned
I. Movement Techniques
Ref: ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), pp. 2-43 to 2-52 and TC
3.21-76, Ranger Handbook (Apr ‘17), pp. 6-2 to 6-4.
Movement techniques are not fixed formations. They refer to the distances between
Soldiers, teams, and squads vary based on mission, enemy, terrain, visibility, and
other factors affecting control. There are three movement techniques: traveling; trav-
eling overwatch; and bounding overwatch. The selection of a movement technique
is based on the likelihood of enemy contact and need for speed. Factors to consider
for each technique are control, dispersion, speed, and security. Individual movement
techniques include high and low crawl, and three to five second rushes from one
covered position to another.
WHEN CHARACTERISTICS
MOVEMENT
NORMALLY
TECHNIQUES CONTROL DISPERSION SPEED SECURITY
USED
Contact not
Traveling More Less Fastest Least
Traveling
overwatch
likely
Contact
possible e
Less More Slower More
pl
Bounding Contact
Most Most Slowest Most
overwatch expected
Ref: ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), table 2-6, page 2-44.
m
Sa
The squad is the essential fire and maneuver element. US Army squads include
two fire teams, while Marine squads include three fire teams made up of a rifleman,
Patrolling
Patrols &
automatic rifleman, grenadier, and team leader. A squad with as few as seven
troops can be split into two fire teams and a squad leader. (Photo by Lithuania Land
Forces.)
e
3. The trail element (behind the forward element) then bounds forward, either slightly left
or right of the overwatch position.
pl
4. Once the bounding element has successfully passed through the terrain, they take up
a position that offers the best observation of the terrain in front of them. The bounding
element now becomes the overwatch position and the old overwatch bounds forward.
5. This process is repeated until the patrol reaches its objective, or the PL selects an-
m
other movement technique due to an improved security situation.
6. If the patrol comes under fire, the bounding overwatch becomes quick and violent.
The overwatch position conducts suppressive fires while the PL directs the bounding ele-
ment to either conduct a hasty attack against the enemy or break contact.
Sa
The effort is to allow maximum use of combat power in the direction of movement, while
exposing our smallest force to any potential enemy. (Photo by Jeong, Hae-jung).
Squad formations include the squad column, the squad line, and the squad file.
These formations are building blocks for the entire element. What that means is that
the smallest element, the fire team, may be in a wedge while the larger element,
such as the squad or platoon may be in another formation. It is quite possible to
have fireteams in wedges, squads in columns, and the platoon in line—all at the
same time. Additionally, this section will discuss a couple variations including the
diamond and the staggered column.
e
pl
m
Sa
threat, the closeness of the terrain, and by the visibility. As a general rule, the unit
should be dispersed up to the limit of control. This allows for a wide area to be
Primary Formations
Ref: ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), pp. 2-19 to 2-43.
Combat formations are composed of two variables: lateral frontage, represented by the
line formation; and depth, represented by the column formation. The advantages attrib-
uted to one of these variables are disadvantages to the other. Leaders combine the ele-
ments of lateral frontage and depth to determine the best formation for their situation. In
addition to the line and column/file, the other five types of formations—box, vee, wedge,
diamond, and echelon—combine these elements into varying degrees. Each does so
with different degrees of emphasis resulting in unique advantages and disadvantages.
e
pl
m
Sa
Patrolling
Patrols &
Chap 8
III. Crossing a
Danger Area
Ref: ATP 3-21.8, Infantry Platoon and Squad (Aug ‘16), pp. 5-16 to 5-23 and TC
3.21-76, Ranger Handbook (Apr ‘17), pp. 6-8 to 6-12.
Crossing danger areas can be achieved through one of a series of battle drills de-
signed to get the patrol to the far side of the danger area with the very least amount
of exposure, and the maximum amount of necessary firepower positioned to deflect
an enemy attack. In essence, the patrol will be moving from one concealed position
to another, getting through the danger area as safely and as quickly as possible.
e
A patrol leader (PL) must assess is which type of danger area the patrol is presented
with. Ideally, the patrol circumvents a danger area—that is, the patrol goes around.
pl
However, linear danger areas rarely leave that option. Instead, the patrol must tra-
verse these danger areas by crossing them.
So, the PL has to assess the type and relative size of the danger area. Also, the PL
has to assess the likelihood of enemy contact. It’s a pretty quick mental checklist:
m
• Linear vs. Open
• Big vs. Small
• Time Constraints
Sa
If the patrol is moving through territory with significant enemy presence, hopefully
the PL allotted a realistic amount of time to conduct the mission. The patrol employs
a more deliberate method of crossing the danger area, one that offers maximum
protection to the front and flanks. For a linear danger area, this might mean the
heart-shaped method. For an open danger area, this might mean the box method.
If, on the other hand, the patrol is moving quickly through territory with sparse enemy
presence and time is of a high priority, then the patrol employs a method of cross-
ing the danger area that makes maximum use of speed as a form of security, with
minimal protection to the front and flanks. For a linear danger area, this might mean
the patch-to-the-road method. For an open danger area, this might mean the bypass
method.
The size of the danger area must also be considered. Even in the case of patrolling
through territory with sparse enemy presence, if the danger area is too large to use
speed as a form of security…it may be best to use a method that offers a greater
form of security.
The platoon leader or squad leader decides how the unit will cross based on the time
he has, size of the unit, size of the danger area, fields of fire into the area, and the
amount of security he can post. An Infantry platoon or squad may cross all at once,
Patrolling
Patrols &
in buddy teams, or one Soldier at a time. A large unit normally crosses its elements
one at a time. As each element crosses, it moves to an overwatch position or to the
far-side rally point until told to continue movement.
(Patrolling) III. Crossing a Danger Area 8-21
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
I. Patch-to-the-Road Method
Using this method, a nine-man squad should be able to cross the danger area in ten sec-
onds or less. Speed is a form of security. This method also allows the column formation
to be maintained, which means greater control and communication for the PL.
1. The point man brings the patrol to a halt and signals that he has come upon a danger
area. The PL comes forward to view the danger area, assesses the situation, and selects
a method of negotiating the danger area.
2. If the patch-to-the-road method is selected, the PL communicates this to the team
with the appropriate hand and arm signal. The entire patrol closes the intervals between
members shoulder-to-shoulder. The patrol members must actually touch each other. This
is done even during daylight hours. This will allow a very fast pace when crossing and
prevent a break in contact.
3. The two-man security team moves from the rear of the formation up to the front. At the
PL’s signal, the first security troop steps up to the danger area only as far as he needs
to look left and right. If the road is clear of enemy presence, the troop takes a position so
he can view down the road to his right. In this position, his unit patch (on the upper part
of his left arm sleeve) will be facing toward the middle of the road. Thus, the method is
called “patch-to-the-road.”
e
pl
m
Sa
This method uses speed as the primary form of security. A left and right security
overwatch is provided locally. At the patrol leader’s signal, the rest of the patrol move in
file across the danger area. (Photo by Jeong, Hae-jung).
Patrolling
Patrols &
This method of forming the ORP is one The wagon wheel method is conducted
of the most simple. After a security
team is placed as the anchor, the entire
patrol plays “follow the leader” in a big
e by having the patrol leader simply walk in
a circle around the area of the intended
ORP. Troops are adjusted once the circle
pl
circle. Once the circle is complete, the PL is complete. Typically a machinegunner
adjusts the circle evenly. sits at 12 and 6 o’clock. (Photo by Jeong,
Hae-jung).
1. The patrol assumes an ERP security halt approximately 100 meters out from the
m
planned ORP site. A leader’s recon is then conducted forward at the ORP site to make
certain the terrain is appropriate for use.
2. The leader’s recon typically involves four members of the patrol—the PL, a compass
Sa
man, and a two-man security team. Before leaving the ERP, the PL issues the assis-
tant patrol leader (APL) a contingency plan and coordinates for their return.
3. Once the leader’s recon has reached the designated ORP site, the PL determines if
the site is appropriate or selects another site nearby.
4. The PL places the two-man security back to back at the 6 o’clock position of the
ORP. The security team will be left at the ORP to watch the objective and to guide the
remainder of the patrol into position. The PL will leave a contingency plan with the se-
curity team before the PL and the compass man return to pick up the rest of the patrol.
5. The PL and the point man return to the rest of the patrol back in the security halt.
The patrol resumes its marching order, and since the compass man has already been
to the ORP and back, he can lead the patrol right to the security team at the 6 o’clock
position. The patrol halts once the compass man links up with the security team and
the PL moves forward.
6. From the 6 o’clock position the PL leads the patrol in a large circular path around the
perimeter of the ORP. This forms the patrol into a large circle through an exercise of
“follow the leader.”
7. Once the circle has been completed, the subordinate leaders adjust the exact posi-
tions of the members to offer the best cover and to provide 360° sectors of fire.
Patrolling
Patrols &
8. The PL pulls subordinate leaders to the center in order to confirm or adjust plans.
The PL sets work priorities in motion for the ORP.
(SUTS3)
Index
Index
A B Commander’s Intent, 1-36
Actions by Friendly Forces, Back-to-Back Method, 8-36 Committed Force, 1-6
1-30 Battle, 1-2 Common Defensive Control
Actions on Contact, 2-39 Battle Handover Line, 2-6 Measures, 3-4
Actions on the Objective, Battle Positions, 3-4 Common Offensive Control
6-21 Measures, 2-6
Block, 1-31
Activities of the Operations Common Tactical Concepts,
Bounding Overwatch, 8-9
Process, 1-40 1-6
Box Method, 8-27
Advance Guard, 2-12 Conflict Prevention, 4-16
Breach, 2-34
After Action Review (AAR), Consolidation of Gains, 2-9,
Breaching Protective Ob- 3-6
1-67
stacles, 7-18
Alliance, 1-19 Contain, 1-31
Breakout from Encirclement,
Ambush, 6-3 Contingency Operations,
5-30
1-23
Ambush Categories, 6-16
Analysis of Terrain and
Weather, 1-46 C
e
Bypass Method, 8-26
Control Crowds, 4-14
Control Measures, 2-6, 3-4
pl
Approach March, 2-16, 5-19 Canalize, 1-31 Cordon and Search, 2-16
Area Ambush, 6-16 Characteristics of Offensive Cordon, 7-10
Area Defense, 3-7 Operations, 2-10 Counterattack, 1-30, 6-23
m
Area of Influence, 1-26 Characteristics of the De- Counterinsurgency Opera-
Area of Interest, 1-26 fense, 3-3 tions (COIN), 4-17
Area of Operations, 1-26 Checkpoints, 4-12 Cover, 1-30, 5-15
Area Reconnaissance, 5-4 Cigar-Shaped Method, 8-31 Creative and Flexible Appli-
Sa
Index-1
Index (Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Defeat in Detail, 1-7 Enabling Operations, 1-32, Forward Edge of the Battle
Defending Encircled, 5-29 5-1 Area, 3-5
Defense In-Depth, 3-9 Encirclement Operations, Forward Operating Base
5-29 (FOB), 4-11
Defense of a Linear Ob-
stacle, 3-25 End State Conditions for Friendly Force Information
Stabilization Efforts, 4-8 Requirement (FFIR), 1-37
Defense Support of Civil
Authorities (DSCA) Tasks, Engagement Area, 3-5, 3-11 Frontal Attack, 2-5
1-17 Engagements, 1-2 Fundamentals of Security
Defense, 3-1 Entering a Building, 7-11 Operations, 5-13
Defensive Operations, 1-16, Envelopment, 2-4
3-2 Escort a Convoy, 4-14 G
Delay Forward of a Specified Governance and Legitimacy,
Essential Elements of 4-18
Line for a Specified Time, Friendly Information
3-22 (EEFI), 1-37 Guard, 1-30, 5-14
Delay, 1-30, 3-22 Establishing a Hide Position,
Delay Within a Sector, 3-22 8-35 H
Hasty Ambush, 6-16
Deliberate Ambush, 6-16 Establishing a Patrol Base,
8-39 Hasty vs. Deliberate Attacks,
Demonstrations, 6-29 2-17
Departing the Forward Line Establishing a Security Halt,
8-29 Hasty vs. Deliberate Opera-
of Troops (FLOT), 5-26 tions, 1-9
Executing a Counterattack,
Describe, 1-34
Desert Effects on Personnel,
7-25
6-26
e
Exfiltration, 5-30
Heart-Shaped Method, 8-24
Hide Position, 8-35
pl
Desert Environments, 7-23 Exploitation, 2-23
I
Desert Operations, 7-23 Infiltrate to the Objective,
Destroy, 1-31, 2-34 F 6-20
Far Ambush, 6-4
m
Deterrence, 1-23, 4-5 Infiltration, 2-5
Feints, 6-29
Direct Control Measures, 3-4 Insurgency, 4-17
File, 8-16
Direct, 1-35 Isolate the Building, 7-3
Final Coordination Line, 2-7
Direction of Attack, 2-6 Isolate, 1-31
Sa
Index-2
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Index
Local Security, 5-17 Offensive Encirclement Positions of Relative Advan-
Lodgment Area, 4-11 Operations, 5-29 tage, 1-24
Offensive Operations, 1-16, Pre-Combat Inspection (PCI),
M 2-2 1-57
Main and Supporting Efforts, Offensive Tactical Tasks, Preparation, 1-57
1-27 2-33 Preparing a Counterattack,
Main Battle Area, 3-5 Open and Secure Routes, 6-24
Meeting Engagement, 2-11 4-14 Primary Formations, 8-12
Methods of Troop Movement, Open Areas, 8-27 Priorities of Work (at the
5-19 Operational Concept, 1-13 ORP), 8-33
METT-TC (Mission Vari- Operational Framework, Priorities of Work (in the
ables), 1-45 1-25 Defense), 3-14
Military Aspects of the Terrain Operations (Unified Logic Priorities of Work (Patrol
(OAKOC), 1-46 Chart), 1-15 Base), 8-42
Military Deception (MILDEC), Operations Order (OPORD), Priority Intelligence Require-
6-30 1-55 ment (PIR), 1-37
Military Engagement, , 1-23, Operations Process, 1-40 Probable Line of Deploy-
4-5 Order of Events (Defense), ment, 2-7
Mission Symbols, 1-29 3-26 Purposes of the Defense, 3-2
Mission Variables (METT- Orders, 1-53 Purposes of the Offense, 2-3
TC), 1-45
Mobile Defense, 3-15
Monitor Compliance with an
P
e
Passage of Lines, 5-25
Pursuit, 2-27
R
pl
Agreement, 4-11 Patch-to-the-Road Method, Raid, 6-17
Mountain Effects on Person- 8-22 Rally Point, 2-7, 8-29
nel, 7-40 Paths to Victory (WIN), 1-28 Range Card, 3-10
Mountain Environments, 7-39 Patrol, 4-14, 8-1 Range of Military Operations,
m
Mountain Operations, 7-39 Patrol Base, 8-39 1-21, 1-22
Movement Techniques, 5-20, Patrolling, 8-1 Recon Pull, 5-7
8-7 Peace Building (PB), 4-16 Recon Push, 5-7
Sa
Index-3
Index (Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
Simultaneity, 1-14
Time of Attack, 2-7
Single-Team Method, 5-4
Train to Win in a Complex
Site Selection, 8-38, 8-39 World, 1-20
Site Sterilization, 8-38 Train, Advise & Assist, 4-1
Small Unit Forms of the Transition, 2-8, 3-6
Defense, 3-25
Traveling Overwatch, 8-8
Small Unit Offensive Tactical
Traveling, 8-8
Tasks, 2-33
Trench Systems, 7-20
Small Unit Stability Tasks,
4-11 Triangle Method, 8-40
Solving Tactical Problems, Troop Leading Procedures,
1-8 1-41
Special Purpose Attacks, 6-1 Troop Movement, 5-19
Special Reconnaissance, Turn, 1-31
5-10 Turning Movement, 2-4
Spoiling Attack, 6-27
Stability Actions (Joint), 4-10 U
Uncommitted Forces, 1-7
Stability in Operations, 4-7
Understand, 1-33
Stability Operations (Army),
1-17, 4-7 Unified Action, 1-18, 1-22
Index-4
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
SMARTbooks
INTELLECTUAL FUEL FOR THE MILITARY
Recognized as a “whole of government” doctrinal reference standard by
military, national security and government professionals around the world,
SMARTbooks comprise a comprehensive professional library designed
with all levels of Soldiers, Sailors, Airmen, Marines and Civilians in mind.
e
pl
m
Sa
www.TheLightningPress.com
The Lightning Press is a service-disabled, veteran-owned small business, DOD-
approved vendor and federally registered — to include the SAM, WAWF, FBO, and FEDPAY.
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
SMARTbooks
INTELLECTUAL FUEL FOR THE MILITARY
MILITARY REFERENCE:
JOINT & SERVICE-LEVEL
Recognized as a “whole of government” doctrinal reference standard by military profes-
sionals around the world, SMARTbooks comprise a comprehensive professional library.
MILITARY REFERENCE:
MULTI-SERVICE & SPECIALTY e
pl
SMARTbooks can be used as quick reference guides during operations, as study
guides at professional development courses, and as checklists in support of training.
m
Sa
THREAT, OPFOR,
REGIONAL & CULTURAL e
pl
In today’s complicated and uncertain world, the military must be ready to meet the
challenges of any type of conflict, in all kinds of places, and against all kinds of threats.
m
Sa
www.TheLightningPress.com
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
www.TheLightningPress.com Purchase/Order
SMARTsavings on SMARTbooks! Save big when you order our titles
together in a SMARTset bundle. It’s the most popular & least expensive way
to buy, and a great way to build your professional library. If you need a quote
or have special requests, please contact us by one of the methods below!
www.TheLightningPress.com
Order SECURE Online
Web: www.TheLightningPress.com
Email: [email protected]
e
Place your order (or leave a voicemail)
at 1-800-997-8827
pl
Phone Orders, Customer Service & Quotes
Live customer service and phone orders available
Mon - Fri 0900-1800 EST at (863) 409-8084
m
Government/Unit/Bulk Sales
The Lightning Press is a service-disabled,
veteran-owned small business, DOD-approved
vendor and federally registered—to include the
SAM, WAWF, FBO, and FEDPAY.
We accept and process both Government
Purchase Cards (GCPC/GPC) and Purchase
Orders (PO/PR&Cs).
15% OFF
Buy direct from our website and always
get the latest editions and the best pricing.
Join our SMARTnews email list for free
RETAIL EVERYDAY notification of changes and new editions.
www.TheLightningPress.com
(Sample Only) Find this and other SMARTbooks at: www.TheLightningPress.com
e
pl
m
Sa