Eg Unit 4 QP

Firefox http://192.168.0.1/5staff/question/qbankivud.jsp?select=1&part=1&ord...
St. Xavier’s Catholic College of Engineering

Chunkankadai, Nagercoil – 629 003
Question Bank
Subject:GE3251 - Engineering Graphics
Unit-4
Course Coutcomes (COs)
CO 1 Exposed to existing national standards related to technical drawings
CO 2 Understand the given Engineering drawing and interpret a three dimensional drawing
Apply the fundamentals and standards in engineering drawing through drafting exercises of
CO 3
geometrical solids
Apply the fundamentals and standards in engineering drawing through drafting exercises of
CO 4
geometrical solids
CO 5 Analyze the three dimensional view of objects as perceived by the human eye
CL-Cognitive Level; Kn-Knowledge;Un-Understand;Ap-Apply;An-Analyze;Ev-Evaluate;Cr-Create;
Q.
Question Marks CL CO
No.
Part-A
A Square prism of base side 30 mm and axis length 60 mm is resting on HP on one of

0 0
1 its bases, with a base side inclined at 25 to VP. It is cut by a plane inclined at 40 to 20 Ap CO4
HP and perpendicular to VP and is bisecting the axis of prism. Draw its front view,
sectional top view and true shape of section
A Pentagonal pyramid of the base side 40 mm and axis length 75 mm is resting on

HP on its base with one of its base side parallel to VP. It is cut by a plane inclined at
2 20 Ap CO4
350 to HP and perpendicular to VP and is bisecting the axis. Draw its front view,
sectional top view and shape of the section.
A Hexagonal prism of base side 30 mm and axis length 60 mm is resting on HP on

one of its bases with two of the vertical faces perpendicular to VP. It is cut by a plane
3 inclined at 500 to HP and perpendicular to VP and passing through a point at a 20 Ap CO4
distance 12 mm to the top base. Draw its front view, sectional top view and true shape
of section.
A Cylinder of base diameter 50 mm and height 60 mm rests on its base on HP. It is

0
4 cut by a plane perpendicular to VP and inclined at 45 to HP. The cutting plane meets 20 Ap CO4
the axis at a distance 15 mm from top to the base. Draw the sectional plane and true
shape of section.
A Cone of base diameter 50 mm and axis length 75 mm in resting on HP on its base.

5 It is cut by a plane inclined at 450 to HP and perpendicular to VP and is bisecting the 20 Ap CO4
axis. Draw the front view and sectional top view and true shape of this section.
1 of 3 05-11-2022, 17:14
A Cube of 60 mm side has its base edges equally inclined to VP. It is cut by a
sectional plane perpendicular to VP, so that the true shape of cut section is a regular
6 20 Ap CO4
hexagon. Locate the plane and determine the angle of inclination of the VT with the
reference line XY. Draw the sectional top view.
A Cone of base diameter 60 mm and axis length 70 mm is resting on HP on its base.

7 It is cut by a plane perpendicular to VP and parallel to a contour generator and is 10 20 Ap CO4
mm away from it. Draw the front view, sectional top view and the true shape section.
A Tetrahedron of side 60 mm is resting on HP on of its faces. It is cut by a plane

perpendicular to the VP, so that the true shape of cut section is a triangle of base 40
8 20 Ap CO4
mm and altitude 30 mm. locate the plane and determine the angle of inclination of the
VT with the reference line XY. Draw the sectional top view and true shape of section

0
9 It is cut by a plane perpendicular to VP and inclined at 75 to HP and is passing 20 Ap CO4
through the apex of the cone. Draw its front view, sectional top view and true shape
of section.
A Pentagonal prism of base side 30 mm and axis length 60 mm is resting on HP on

one of its rectangular faces, with its axis perpendicular to VP. It is cut by a plane
10 inclined at 400 to VP and perpendicular to HP and passing through a point 25 mm 20 Ap CO4
from rear base of the prism. Draw its top view, sectional front view and true shape of
section.
A Hexagonal pyramid of base side 30 mm and axis length 60 mm is resting on HP on

its base with two of its base sides being perpendicular to VP. It is cut by a plane
11 20 Ap CO4
perpendicular to VP and parallel to and 25 mm above the HP. Draw its front view and
sectional top view

12 It is cut by a plane perpendicular to both HP and VP and is 10 mm to the left of the 20 Ap CO4
axis. Draw its top view, front view and true shape of section.
A Pentagonal prism of base side 30 mm and axis length 60 mm is resting on HP on

0
13 its base with a side of base parallel to VP. It is cut by a plane inclined at 35 to HP 20 Ap CO4
and perpendicular to VP and meets the axis at a distance 35 mm from the base. Draw
the development of the lower portion of the prism
Draw the development of the lower portion of a cylinder of diameter 50 mm and axis
14 70 mm when sectioned by a plane inclined at 400 to HP and perpendicular to VP and 20 Ap CO4
bisecting the axis.
15 A Vertical chimney of circular cross section of 400 mm diameter joins the roof of a 20 Ap CO4
room sloping at 350 to the horizontal. The shortest length of the chimney is 800 mm.
2 of 3 05-11-2022, 17:14
Determine the shape of the sheet metal from which the chimney can be made. Use
scale 1:10.
A Cylinder of base diameter 50 mm and axis length 70 mm is resting on HP on its

base. A cylindrical hole of 40 mm diameter is drilled on the surface of the cylinder.
16 20 Ap CO4
The axis of the hole intersects with the axis of the cylinder at right angles and bisects
axis of this cylinder. Draw the development of the lateral surface of the cylinder.
A Cube of side 30 mm rests on one of its faces on HP with a vertical face inclined at
0 0
17 30 to the VP. It is cut by a plane perpendicular to the VP and inclined at 50 to the 20 Ap CO4
HP. The plane bisects the axis of the cube. Draw the development of the surface of
the right portion of the cut cube.
A Hexagonal pyramid of side of base 30 mm and axis 70 mm rests on its base with
edges of base parallel to VP. A circular hoe of diameter 30 mm is completely drilled
18 through the pyramid such that the axis of the hole is perpendicular to VP and 20 Ap CO4
intersects the axis of the pyramid 20 mm above the base. Draw the development of
the lateral surface of the pyramid showing the true shape of the hole formed on it.
A Cone of base diameter 60 mm and height 70 mm is resting on its base on HP. It is

cut by a plane perpendicular to the VP and parallel to HP at a distance of 20 mm from
19 the vertex. It is also cut by a plane inclined at 400 to the base and meeting the axis at 20 Ap CO4
a point 20 mm above the base. Draw the development of the lateral surface of the cut
one.
A Hexagonal Pyramid of side 30 mm and altitude 60 mm is resting on HP on its base

with two of the base sides perpendicular to VP. The pyramid is cut by a plane inclined
20 20 Ap CO4
at 300 to HP and perpendicular to VP and is bisecting the axis. Draw the development
of the remaining portion of the pyramid.
3 of 3 05-11-2022, 17:14

Eg Unit 4 QP

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eg Unit 4 QP

Uploaded by

Copyright:

Available Formats

Firefox http://192.168.0.1/5staff/question/qbankivud.jsp?select=1&part=1&ord...

St. Xavier’s Catholic College of Engineering

A Square prism of base side 30 mm and axis length 60 mm is resting on HP on one of

A Pentagonal pyramid of the base side 40 mm and axis length 75 mm is resting on

A Hexagonal prism of base side 30 mm and axis length 60 mm is resting on HP on

A Cylinder of base diameter 50 mm and height 60 mm rests on its base on HP. It is

A Cone of base diameter 50 mm and axis length 75 mm in resting on HP on its base.

A Cone of base diameter 60 mm and axis length 70 mm is resting on HP on its base.

A Tetrahedron of side 60 mm is resting on HP on of its faces. It is cut by a plane

A Cone of base diameter 50 mm and axis length 60 mm is resting on HP on its base.

A Pentagonal prism of base side 30 mm and axis length 60 mm is resting on HP on

A Hexagonal pyramid of base side 30 mm and axis length 60 mm is resting on HP on

A Cone of base diameter 50 mm and axis length 75 mm is resting on HP on its base.

A Pentagonal prism of base side 30 mm and axis length 60 mm is resting on HP on

A Cylinder of base diameter 50 mm and axis length 70 mm is resting on HP on its

A Cone of base diameter 60 mm and height 70 mm is resting on its base on HP. It is

A Hexagonal Pyramid of side 30 mm and altitude 60 mm is resting on HP on its base

You might also like