Professional Documents
Culture Documents
Beam
Beam
LOAD CALCULATION Live load Dead load TOTAL LOAD UNIFOM LOAD MAX B.M = = = = = = 3 kn/m2 0.5 kn/m2 3.5 KN/M2 6.4 KN/M WL2/8 20.72648 KN.M
TAKING Qbc
165 N/mm2
Taking ISMB 200 AS BEAM SECTION, SECTIONAL PROPERTIES Cross Sectional Area Moment of Inertia Ixx Moment of Inertia Iyy Modulus of Section Zxx Modulus of Section Zyy Beam Depth Web Thickness Zxx = 56.26 2235.4 150 223.5 30 200 5.7 cm2 cm4 cm4 cm3 cm3 mm mm
HENCE SAFE
32.576 KN 32576 N
Qva <
HENCE SAFE
15.66154 MM
HENCE SAFE
Central Column
Y SECTIONAL PROPERTIES AREA D B tf IXX IYY ZXX ZYY RXX RYY SPACING LENGTH tw load moment 92.27 450 150 17.4 30390.8 834 1350.7 111.2 18.15 3.01 280 7.7 9.4 3734.84 2952.45 CM2 MM MM MM CM4 CM4 CM3 CM3 CM CM CM M kn knm SECTIONAL PROPERTIES OF COMBINED SECTION IXX IYY ZXX ZYY RXX RYY LEFF X LEFFY LEFF/RX LEFF/RY 60781.6 3618652 2701.404 25847.51 18.1485 140.0323 7.7 11.55 42.42774 8.248098 CM4 CM4 CM3 CM3 CM CM M M
Y 1472.13 X 1500.762 k1 1 k2 0 c2 c1 Elastic critical stress 1500.762 perm stress bending 156 perm stress axial 137.439
202.3865
1.092931
interaction ratio
1.479561
F E
G H
10.53M
30M
30M
HEIGHT/WIDTH
0.1755 <0.5
portion of roof E F G H
wind incidence pressure coefficient 0 90 -0.8 -0.8 -0.8 -0.4 -0.4 -0.8 -0.4 -0.4
DESIGN PRESSURE COEFFICIENT ON ROOF (EXTERNAL) Cp(net) = Cpe - Cpi when angle =0 -1.3 -0.9
case 1 if Cpi=0.5 when angle =0 Cp(for region E AND F) Cp(for region G AND H) when angle =90 Cp(for region E AND G) Cp(for region F AND H)
-1.3 -0.9
case 2 if Cpi=-0.5 when angle =0 Cp(for region E AND F) Cp(for region G AND H) when angle =90 Cp(for region E AND G) Cp(for region F AND H)
-0.3 0.1
-0.3 0.1
L/W
Cp(net) case 1 when angle =0 Cp(for WALL A) Cp(for WALL B) Cp(for WALL C) Cp(for WALL D)
= if Cpi=0.5
Cpe - Cpi
0.2 -0.7 -1 -1
case 2
if Cpi=0.5
when angle =90 Cp(for WALL A) Cp(for WALL B) Cp(for WALL C) Cp(for WALL D)
-1 -1 0.2 -0.7
case 1 when angle =0 Cp(for WALL A) Cp(for WALL B) Cp(for WALL C) Cp(for WALL D)
if Cpi= -0.5
1.2 0.3 0 0
case 2
if Cpi=-0.5
when angle =90 Cp(for WALL A) Cp(for WALL B) Cp(for WALL C) Cp(for WALL D)
0 0 1.2 0.3
6m Nmm
ry
= 0.2(b0+100) 50
open spacing wall thick uniform load wt of masonry ht of brick work above lintel assume bearing for lintel effective sp[an
m mm kn/m kn/m3 m
100 mm 3700 mm
SELF WT OF BEAM
BM DUE TO WT W
= =
SINCE LINTEL IAS LATERALLY UNSUPPORTED BEAM REDUCED PERMISSIBLE BENDING STRESS IN COMP =
100 N/MM2
515419.9 MM3
TAKING MB 300 Z D T t ryy h2 d1 573.6*1000 300 12.4 7.5 28.4 29.25 241.5 mm mm mm mm mm mm
Qbc
96.06 n/mm2
SPAN
EFFECTIVE SPAN uniform load overall depth of beam comp flange laterally supported
SECTION MODULUS LET US PROVIDE MB 225 A B T I Zxx h2 g Zp Ap 3972 110 11.8 3441.8 305.9 25.85 60
1362903 MM3
= Zreq - Zxx 1057003.226 mm3 = Zp/D 4697.792115 4700 MM2 = 16T1 384
PROVIDE 2 PLATES 12 mm thick on each flange widtth of cover plate = 195.8333 200 mm 70 < 384 provide 2 plates 200mm x 12mm on each flange Ixx = 18368.88 x10^4
Qbc,cal = BM*Y/I
CHECK FOR BENDING STRESS IN TENSION TRY 2 PLATE OF 14 MM THK I GROSS Qbc,cal
DESIGN OF CONNECTIONS LET US provide 20mm dia rivets in two rows to connect the cover plates with the flange rivets will be staggered gross dia of rivet = = 21.5 pie/4 *d2*zvf 36286.63 N
d*t*qpf 76110 N
RIVET VALUE
36286.63
SPACING
2IRv /VAY
span of truss spacing of truss inclination spacing of purlins wind pressure ac roof sheeting dead load of purlin dead load of roof total dead load dead load parallel to roof dead load normal to roof
6 3 30 2 1.5 200
100 n/m 400 n/m 500 n/m 500 sin30 250 N/m 500 cos 30 433.1 N/m 3000 N/m 3433.1 N/m
wind load total load normal to roof (a) taking channel section Muu =
Mvv
Qbc or Zuu
= Muu/Zuu +Mvv+Zvv
= <1.33*165
117 N/MM2
(B)
dead load is assumed to act normal to roof wind load total load normal to roof 3000 N/m 3500 N/m
Muu
depth of angle
WIDTH OF ANGLE
PROVIDE PURLIN ANGLE 80mmx50mmx10 section modulus Qbc,cal < = = = 14400 mm3 218.75 N/mm2 1.33*165 N/mm2 219.45 N/mm2
(c)
taking channel section with sag rods Muu = PL/10 3089790 N.mm (HL/2)/10 112.5 N.mm (length is half as sag rods is used)
Mvv
Qbc or Zuu
= Muu/Zuu +Mvv+Zvv
0.1n 0.09H/SQRT(d) no of storey in the building including basement TOTAL HEIGHT IN M max base dimension of the building in m,in the direction parallel to applied seismic force KC@h W design seismic coefficient beta x I x qo total dead load and appropriate % of live load a coefficient which depends on fundamental time period time period in sec
W C T K q0 beta I
Performance factor depending on structural framing system and brittleness &ductility of constru basic horizontal seismic coefficient a factor depending on soil foundation system IMPORTANCE FACTOR depending on life and function of the srtucture
distribution of forces along height of the building Qi Qi Vb Wi Vb xWixhi2/ summation of wixhi2 lateral forces at floor i base shear load of the floor i dead load +aprropriate % of live load height measured from base of the building to floor i no of storey including the basement
hi n