Download as pdf or txt
Download as pdf or txt
You are on page 1of 15

Donkey Kong

Amigurumi Pattern
By Edward Yong

This is an original pattern created by Edward Yong (March 2016). You may keep a copy for your own personal
use but please do not copy, post, distribute, or sell this pattern. You are free to sell finished items made from this
pattern.

Donkey Kong is copyrighted by Nintendo. I do not own the character only the pattern and pictures.
Donkey Kong Amigurumi Pattern
About the Pattern:
This amigurumi pattern will guide you through the creation of
Donkey Kong. The finished piece will be approximately 5 inches
in length, 12 inches in width, and 12 inches in height.
All the patterns were created with a 2.75mm (C) hook but
different hooks sizes can be used.
The yarn used in the pattern was primarily based on color. As
long as it is worsted weight (or DK weight) and matches the hook
size it will be fine.
To create these items you will need a basic understanding of
crochet. There are many tutorials on YouTube that guide you
through the various stitches in crochet.

Materials:
 Brown, red, tan, white, and yellow yarn
 Fibrefill or polyfill
 2.75mm (E) hook
 Yarn needle
 Scissors
 Stitch markers

Page 2
Donkey Kong Amigurumi Pattern
Abbreviations:
The abbreviation used in the pattern are as follows:
ch - Chain
dc - Double Crochet
dec - Decrease
F/O - Fasten Off
hdc - Half Double Crochet
inc - Increase
Rnd - Round
sc - Single Crochet
sk - Skip Stitch
ss - Slip Stitch
st - Stitch
tog - Together (i.e. decreasing stitch)

Notes:
Before starting this project, please read through the pattern
carefully. Certain pieces must be crocheted first for proper
assembly.
Unless stated otherwise in pattern, work in continuous rounds.
Use a stitch marker to denote the beginning/end of a round. This
will help when creating the pieces.
Pin all the pieces in position before sewing them in place.
Ensure to stuff the piece as it is created.
Page 3
Donkey Kong Amigurumi Pattern
Instructions: through the 2 stitches in each
corner. The toe with the yarn
Big Toe (2): Using tan yarn…
attached should be on the
Rnd 1: 6 sc into magic circle (6) outside of the foot.
Rnd 2: 6inc (12)
Rnd 3-4: 12sc Foot (2): Using the tan yarn
Rnd 5: 4sc, dec, 4hdc hdc2tog attached to the fourth toe...
(10) Rnd 8: sc, *2inc, 2sc* x 7, 2inc,
Rnd 6: 3sc, dec, 3hdc, hdc2tog sc (48)
(8) Rnd 9-11: 48sc
Rnd 7: 4sc, 4hdc Rnd 12: *14sc, dec* x 3 (45)
F/O and leave a tail for Rnd 13: *13sc, dec* x 3 (42)
attaching the big toe to the foot.
Rnd 14: *5sc, dec* x 6 (36)
Rnd 15: *10sc, dec* x 3 (33)
Toe (8): Using tan yarn... Rnd 16: *9sc, dec* x 3 (30)
Rnd 1: 6 sc into magic circle (6) Attach the big toe to the foot as
Rnd 2: 6inc (12) follows...
Rnd 3-4: 12sc Rnd 17: 2sc through both the
Rnd 5: *4sc, dec* x 2 (10) toe and foot pieces, 18sc

Rnd 6: *3sc, dec* x 2 (8) Note: When attaching, ensure


that one foot has the big toe
Rnd 7: 8sc
bending downward and the
F/O 3 toes and leave yarn other bending upwards. To do
attached to the fourth toe. Fold this, attach the toe to the foot
toes in half so that yarn tail is in along the side where there is a
corner. Sew 4 toes together

Page 4
Donkey Kong Amigurumi Pattern
single crochet and half double Rnd 18: 36sc
crochet side by side. Rnd 19: *3sc, inc* x 6 *2sc,
Rnd 18: 8sc around the big toe, dec* x 3 (39)
28sc (36) Rnd 21: 39sc
Rnd 19: *4sc, dec* x 6 (30) Rnd 22: *4sc, inc* x 6, *sc, dec*
Rnd 20: *3sc, dec* x 6 (24) x 3 (42)
Rnd 21: *2sc, dec* x 6 (18) Rnd 23-24: 42sc
Rnd 22: *sc, dec* x 6 (12) Rnd 25: *12sc, dec* x 3 (39)
Rnd 23: 6dec (6) Rnd 26: *11sc, dec* x 3 (36)
F/O and leave a tail for sewing Rnd 27: *10sc, dec* x 3 (33)
closed the 6st opening. Rnd 28: *9sc, dec* x 3 (30)
Rnd 29: *3sc, dec* x 6 (24)
Leg (2): Using brown yarn…
Rnd 1: ch 30, ss into 1st ch to F/O one leg and leave yarn
create round attached to second leg. Fold the
Rnd 2-4: 30sc legs in half and line them up.
From the back of the leg, count
Rnd 5: *9sc, inc* x 3 (33)
up 6 stitches between the 2 the
Rnd 6-7: 33sc pieces. Sew the legs together
Rnd 8: *10sc, inc* x 3 (36) using 8 stitch with this as the
Rnd 9-10: 36sc starting point and go
backwards. Work down
Rnd 11: *11sc, inc* x 3 (39)
between the cheeks of the
Rnd 12-15: 39sc bottom 4-5 rows, between the
Rnd 16: *11sc, dec* x 3 (36) legs, and up the front until you
reach the starting point. F/O
Rnd 17: 12inc, 12dec
and weave in tail.
Page 5
Donkey Kong Amigurumi Pattern
Body & Head: Using the Rnd 51-57: 84sc
brown yarn attached to the Rnd 58: *12sc, dec* x 6 (78)
leg...
Rnd 56: *11sc, dec* x 6 (72)
Rnd 30: 36sc
Rnd 57: *10sc, dec* x 6 (66)
Note: Put a sc into the corners
Rnd 58: *9sc, dec* x 6 (60)
of the joining stitches.
Rnd 59: *8sc, dec* x 6 (54)
Rnd 31: 36sc
Rnd 60: *7sc, dec* x 6 (48)
Rnd 32: *5sc, inc* x 6 (42)
Rnd 61: *6sc, dec* x 6 (42)
Rnd 33: 42sc
Rnd 62: *6sc, inc* x 6 in front
Rnd 34: *13sc, inc* x 3 (45)
loop only (48)
Rnd 35: 45sc
Rnd 63: *7sc, inc* x 6 (54)
Rnd 36: * 14sc, inc* x 3 (48)
Rnd 64: *8sc, inc* x 6 (60)
Rnd 37: 48sc
Rnd 65: *7sc, inc* x 6 (54)
Rnd 38: *15sc, inc* x 3 (51)
Rnd 66-70: 60sc
Rnd 39: 51sc
Rnd 71: *18sc, dec* x 3 (57)
Rnd 40: *16sc, inc* x 3 (54)
Rnd 72: *17sc, dec* x 3 (54)
Rnd 41-42: 54sc
Rnd 73: *16sc, dec* x 3 (51)
Rnd 43: *8sc, inc* x 6 (60)
Rnd 74: *15sc, dec* x 3 (48)
Rnd 44: *9sc, inc* x 6 (66)
Rnd 75: *14sc, dec* x 3 (45)
Rnd 45: *10sc, inc* x 6 (72)
Rnd 76: *15sc, dec* x 3 (42)
Rnd 46: 72sc
Rnd 77: *5sc, dec* x 6 (36)
Rnd 47: *11sc, inc* x 6 (78)
Rnd 78: *4sc, dec* x 6 (30)
Rnd 48: 78sc
Rnd 79: 30sc
Rnd 50: *12sc, inc* x 6 (84)

Page 6
Donkey Kong Amigurumi Pattern
Rnd 80: *3sc, dec* x 6 (24) Nose: Using tan yarn…
Rnd 81: 24sc Row 1: ch 6
Rnd 82: *2sc, dec* x 6 (18) Row 2: sc in 2nd ch from hook,
Rnd 83-84: 5sc, 9hdc ,4sc hdc, dc, hdc, sc (5)
Rnd 85: *sc, dec* x 6 (12)
Rnd 86-87: 4sc, 6hdc, 2sc F/O and leave a very long tail to
sew the nose to the mouth
Rnd 88: 6dec (6)
piece.

F/O and leave a long enough


tail to sew close the 6 stitch Ear (2): Using tan yarn…
opening. Rnd 1: 6sc in magic circle (6)
Note: Lightly stuff the point of Rnd 2: *2sc, inc* x 2 (8)
the head. The piece needs to Rnd 3: 8sc
fold over to create the hair.
Rnd 4: 3inc, 5sc (11)
Rnd 6: *sc, inc* x 3, 5sc (14)
Eye (2): Using white yarn…
Rnd 7: *5sc, dec* x 2 (12)
Rnd 1: 6sc in magic circle (6)
Rnd 8: *sc, dec* x 4 (8)
Rnd 2: 6inc (12)
Rnd 3: *3sc, inc* x 3 (15)
F/O and leave a very long tail to
Rnd 4: 15sc sew shut the 8 stitch opening
and attached the ear to the
head.
F/O and leave a very long tail to
sew the eye to the head.

Page 7
Donkey Kong Pokémon Amigurumi
Mouth: Using tan yarn... Eyebrow: Using tan yarn…
Rnd 1: 6sc in magic circle (6) Rnd 1: 4sc in magic circle (4)
Rnd 2: 2hdc in each of the next Rnd 2-6: 4sc
3 stitches, 2inc (12) Rnd 7: inc, 3sc (5)
Rnd 3: *hdc, 2hdc in the same Rnd 8: inc, 4sc (6)
st* x 4, *sc, inc* x 2 (18)
Rnd 9-23: 6sc
Rnd 4: *2hdc, 2hdc in the same
Rnd 24: dec, 4sc (5)
st* x 4, *2sc, inc* x 2 (24)
Rnd 25: dec, 3sc (4)
Rnd 5: *3hdc, 2hdc in the same
st* x 3, *3sc, inc* x 2 (30) Rnd 26-30: 4sc
Rnd 6: *4hdc, 2hdc in the same
st* x 3, *4sc, inc* x 2 (36) F/O and leave a very long tail to
Rnd 7: *5hdc, 2hdc in the same sew the eyebrow to the head.
st* x 4, 12sc (40)
Rnd 8: *6hdc, 2hdc in the same
st* x 4, 12sc (44)
Rnd 9: *7hdc, 2hdc in the same
st* x 4, 12sc (48)
Rnd 10: *8hdc, 2hdc in the
same st* x 4, 12sc (52)
Rnd 11: *9hdc, 2hdc in the
same st* x 4, 12sc (56)
Rnd 12: *10hdc, 2hdc in the
same st* x 4, 12sc (60)
F/O and leave a very long tail to
sew the mouth to the body.

Page 8
Donkey Kong Amigurumi Pattern
Thumb (2): Using tan yarn… Hand/Arm (2): Form the rest
Rnd 1: 6sc into magic circle (6) of the hand as follows with the
attached tan yarn...
Rnd 2: 6inc (12)
Rnd 12-14: 20hdc, 20sc (40)
Rnd 3-5: 6hdc, 6sc (12)
Rnd 15-16: 40sc
Rnd 6-8: sc, 6hdc, 5sc (12)
Attach the thumb to the hand in
Rnd 9-10: 2sc, 6hdc, 4sc (12)
this row. Depending on the right
F/O and weave in tails. or left hand perform one of the
following...

Finger (8): Using tan yarn… Rnd 17 (Left): 19sc, 4sc


through both pieces, 17sc (40)
Rnd 1: 6 sc into magic circle (6)
Rnd: 17 (Right): 4sc though
Rnd 2: *sc, 2inc* x 2 (10) both pieces, 36sc (40)
Rnd 3-5: 5hdc, 5sc Rnd 18 (Left): 19sc, 10sc
Rnd 6-8: sc, 5hdc, 4sc around the outside of the
Rnd 9-11: 2sc, 5hdc, 3sc thumb, 17sc (46)

Rnd 12: 2sc Rnd 18 (Right): 10sc around the


outside of the thumb, 36sc (46)
F/O 3 fingers and leave yarn
attached to the fourth finger. Rnd 19: *21sc, dec* x 2 (44)
Fold fingers in half so that yarn Rnd 20: *20sc, dec* x 2 (42)
tail is in corner. Sew 4 fingers Rnd 21: *5sc, dec* x 6 (36)
together through the 2 stitches
Rnd 22: *4sc, dec* x 6 (30)
in each corner. The finger with
the yarn attached should be on Switch to brown yarn...
the outside of the hand. Rnd: 23: *4sc, inc* x 6 (36) in
front loops only
Rnd 24: 36sc in back loop only
Page 9
Donkey Kong Amigurumi Pattern
25-27: 36sc F/O and leave a long tail to sew
Rnd 28: *11sc, inc* x 3 (39) closed the 6 stitch opening and
attach the arm to the body.
Rnd 29: 39sc
Rnd 30: *12sc, inc* x 3 (42)
Rnd 31-34: 42sc
Rnd 35: *5sc, dec* x 6 (36)
Rnd 36: *11sc, inc* x 3 (39)
Rnd 37: *12sc, inc* x 3 (42)
Rnd 38-43: 42sc
Rnd 44: *5sc, dec* x 6 (36)
Rnd 45: *12sc, dec* x 3 (39)
Rnd 46: *13sc, dec* x 3 (42)
Rnd 47-50: 42sc
Rnd 51: *12sc, dec* x 3 (39)
Rnd 52: * 11sc, dec* x 3 (36)
Rnd 53: *10sc, dec* x 3 (33)
Rnd 54: *9sc, dec* x 3 (30)
Rnd 55: *3sc, dec* x 6 (24)
Rnd 56: *2sc, dec* x 6 (18)
Rnd 57: *sc ,dec* x 6 (12)
Rnd 58: 6dec (6)

Page 10
Donkey Kong Pokémon Amigurumi
Stomach and Chest Patch: Rnd 34: dec, 38sc, dec, turn
Using tan yarn... (40)
Row 1: ch 5 Rnd 35: 40sc, turn
Row 2: sc in 2nd ch from hook, Rnd 36: dec, 36sc, dec, turn
3sc, turn (4) (38)
Row 3: inc, 2sc, inc, turn (6) Rnd 37: 38sc, turn
Row 4: inc, 4sc, inc, turn (8) Rnd 38: dec, 34sc, dec, turn
(36)
Row 5: inc, 6sc, inc, turn (10)
Rnd 39: 36sc, turn
Row 6: 10sc, turn
Rnd 40: dec, 32sc, dec, turn
Row 7: inc, 8sc, inc, turn (12)
(34)
Row 8: 12sc, turn
Rnd 41: 34sc, turn
Row 9: inc, 10sc, inc, turn (14)
Rnd 42: dec, 30sc, dec, turn
Row 10: 14sc, turn (32)
Row 11: inc, 12sc, inc, turn (16) Rnd 43: dec, 28sc, dec, turn
Row 12-21: 16sc, turn (30)
Row 22: inc, 14sc, inc, turn (18) Rnd 44: dec, 12sc, 2ss, 12sc,
Rnd 23: inc, 16sc, inc, turn (20) dec (28)
Rnd 24: inc, 18sc, inc, turn (22)
Rnd 25: *inc, sc* x 5, 2sc, *sc, F/O and leave a very long tail to
inc* x 5, turn (32) sew the patch to the body.

Rnd 26: *sc, inc, sc* x 5, 2sc,


*sc, inc, sc* x 5, turn (42)
Rnd 27-33: 42sc, turn

Page 11
Donkey Kong Pokémon Amigurumi
Tie: Using red yarn... Row 16: dec, 8sc, dec, ch1,
turn (10)
Row 1: ch 2
Row 17-18: 10sc, ch1, turn
Row 2: sc in 2nd ch from hook,
ch1, turn Row 19: dec, 6sc, dec, ch1,
turn (8)
Row 3: inc, ch1, turn (2)
Row 20-21: 8sc, ch1, turn
Row 4: 2inc, ch1, turn (4)
Row 22: dec, 4sc, dec, ch1,
Row 5: inc, 2sc, inc, ch1, turn
turn (6)
(6)
Row 23-24: 6sc, ch1, turn
Row 5: inc, 4sc, inc, ch1, turn
(8) Row 25: dec, 2sc, dec, ch1,
turn (4)
Row 6: inc, 6sc, inc, ch1, turn
(10) Row 26-27: 4sc, ch1, turn
Row 7: inc, 8sc, inc, ch1, turn Row 28: sc, dec, sc, ch1, turn
(12) (3)
Row 8: inc, 10sc, inc, ch1, turn Row 29-60: 3sc, ch1, turn
(14) Row 61: dec, sc, ch1, turn (2)
Row 9: inc, 12sc, inc, ch1, turn Row 62: dec
(16)
Row 10: dec, 12sc, dec, ch1,
F/O and weave in tail.
turn (14)
Row 11-12: 14sc, ch1, turn
Note: The length of the tie can
Row 13: dec, 10sc, dec, ch1,
be adjusted to accommodate
turn (12)
the size of Donkey Kong’s neck
Row 14-15: 12sc, ch1, turn by increasing/decreasing
number of row with 3 single
crochet.
Page 12
Donkey Kong Amigurumi Pattern
Assembly:
1) Attach the feet to the bottom of the legs
with the long tail and whip stitch. The
leg is attached at the front of the foot in
Rnd 12 and goes all the way back to the
last round on the foot. Ensure the big
toes are pointed inwards. Angle the feet
so that the smaller toes point forward
and the big toe points inward. Stuff the
legs firmly before closing the opening.
2) Attach the stomach and chest patch to
the front of the body. The patch should
start at Rnd 26 of the body. Line up the
patch with the middle point between the
2 legs. With the yarn tail from the patch
use a whip stitch piece. Ensure the
bottom of the chest lines up with the
increasing rounds of the body (i.e. Rnd
44). The top portion of the patch should
reach Rnd 61. Increase/decrease the
number of 42 stitch rows to the chest
piece to accommodate.
3) Attach the arms on the side of the body
with the tail from the arm pieces.
Position them so that the fingers bend
backwards and the thumbs face inward.
The arms were attached starting Rnd 62
and going down to Rnd 54.

Page 13
Donkey Kong Amigurumi Pattern
4) Attach the mouth piece to the head. I found that folding the
piece in half so that the 12sc portion faces upwards along
with 9hdc on either side. Position the top have and sew into
the head with a whip stitch. Once you reach the bottom half
of the folded mouth piece, flip it over and position the bottom
half. The centre bottom of the mouth piece should overlap
with the top few rows of the chest patch. Continue attaching
the mouth piece with a whip stitch. Firmly stuff the mouth
piece before sewing closed the opening.
5) Attach the nose to the mouth piece. Centre the nose on the
mouth piece and position it between Rnd 2 and Rnd 3. Sew
Row 1 (i.e. the row of chains) of the nose down in Rnd 3 and
only sew down the top of the double crochet in Row 2 to Rnd
2. This creates the nostrils.
6) Attach the eyes to the head. Position them equidistant from
the middle of the face. Leave 2 stitches between the eyes.
8) Attach the eyebrow
ridge to the face. The
eyebrow ridge should
frame the eyes by 1
stitch along the sides
and top. Ensure to
create peaks in the
corners and a dip
between the eyes with
the eyebrow ridge.
9) Attach the ears to either
side of the head. Ensure
that the bottom of the

Page 14
Donkey Kong Amigurumi Pattern
ear touches the edge of the mouth
piece. Position the ears so that the
increases are folded in half and
pointing backwards.
10) I used black and brown felt to needle
felt the pupil and iris. A sheet of felt can
be used to cut out the shapes for the
eyes and sewn onto the piece. Ensure
the eyes are in pointing in the same
direction.
11) I used the same yarn to create the lips as I did for the mouth
piece. I positioned the yarn for the upper lip, then pulled the
end through the mouth piece. I lined up another piece of yarn
to create the lower lip. I weaved in the yarn tails and needled
felted the two pieces of yarn to ensure they stay in place.
12) Create the letters ‘D’ and ‘K’ on the tie with surface crochet.
These letters can also be created by
needle felt or cut from a sheet of yellow
felt. Ensure to tie the tie properly so
that it does not twist and the letters are
facing outwards. You may need to
block the tie to get it to lay flat.
Now it’s complete! Hope you enjoyed
making this as much as I did. If there are
any mistakes feel free to contact me.
E-mail: [email protected]
Instagram: eddieyong81
Twitter: @eddieyong81
Page 15

You might also like