Catalog MSG14-2550/US Servovalves

Technical Information Series SE20

General Description
Series SE20 is a two stage, 4-way, flapper and nozzle
style servovalve. The SE20 has a wide range of flow
ratings and a high performance spool and sleeve
design.
A special jewel feedback design enhances durability
and prevents ball glitch problems, which can occur in
other types of servovalves. This valve is rated for
315 Bar (4500 PSI) service with an option for
500 Bar (7250 PSI).

C Features
• Lapped spool and sleeve
• Jewel feedback ball for durability
• Aluminum body
• Medium and High performance
• ISO 10372 standard 22.23 mm (0.875 in.) port circle
Specifications
Flow Rating ±10% 3.8, 9.5, 19, 38, 63, 75 LPM
@ 70 Bar (1000 PSI) (1, 2.5, 5, 10, 16.5, 20 GPM)
Supply Pressure 10 – 315 Bar Flow vs. Pressure Drop
(145 – 4500 PSI)
500 Bar (7250 PSI) Optional at 100% command
Tank Port Pressure 210 Bar (3000 PSI) Max. Flow Path P →C1 →C2 →R
< 10 Bar (145 PSI) for
best performance
GPM LPM
Null Leakage Flow 1.2 – 1.9 LPM (0.3 – 0.5 GPM)
20
per 70 Bar (1000 PSI) 30 120
16.5
Pilot Flow 0.4 – 0.7 LPM (0.1 – 0.2 GPM)
@ 210 Bar (3000 PSI) 80
10
Input Command ±40 mA std. 15
Frequency Response > 100 Hz
10 40
@ 90° phase shift (See Performance Curves) 5
7.5 28
Non-Linearity ≤ 10%
Hysteresis ≤ 3% 5 20
2.5
Threshold ≤ 0.5%
12
Null Shift
with temperature ≤ 2% per 55°C (100°F) 2.5
with pressure ≤ 2% per 70 Bar (1000 PSI) 8
1
Pressure Gain 60% typical
change in pressure
per 1% change in 1 4
input command 2.8
Step Response See graphs
Fluid Petroleum based Mineral Oil,
10 – 110 cSt at 38°C (100°F)
0.3 1.2
Fluid Cleanliness ISO 4406 15/12 or better Bar 21 35 70 140 210

Operating -30°C to +130°C PSI 300 500 1000 2000 3000

Temperature (-22°F to +266°F)
Protection Class NEMA 4, IP65

WARNING: This product can expose you to chemicals including Lead, Nickel (Metallic), or 1,3-Butadiene which are known to the State of California to
cause cancer, and Lead or 1,3-Butadiene which is known to the State of California to cause birth defects and other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
C01_Cat2550.indd, ddp, 04/19

C58 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog MSG14-2550/US Servovalves
Ordering Information Series SE20

SE20

Series Version Pilot Material Coils Wiring Seal Operating Flows Special Factory Code
Source Options Pressure Options for Special Options

Code Description
Code Description Omit Standard
H High performance 1) S (Specify) 2)
S Standard 2)
Consult factory for
1)
only available up to price, delivery
40 LPM (10 GPM)

Code Description
and availability of
special options. C
A Internal Code Description
C External (5th port) 1 4 LPM (1.0 GPM)
2.5 10 LPM (2.5 GPM)
5 20 LPM (5.0 GPM)
Code Description
10 40 LPM (10.0 GPM)
A Aluminum (std.)
16.5 63 LPM (16.5 GPM)
S Stainless Steel
20 75 LPM (20.0 GPM)

Code Description Parallel Series Code Description

F 80 Ohms 40 mA 20 mA A 315 Bar (4500 PSI)
H 200 Ohms 15 mA 7.5 mA B 500 Bar (7250 PSI) 3)
G 22 Ohms 200 mA 100 mA 3)
Requires steel body
T 1000 Ohms 10 mA 5 mA
M 27 Ohms 100 mA 50 mA Code Description
L 1200 Ohms 20 mA 10 mA V Fluorocarbon (std.)
A 40 Ohms 60 mA 30 mA N Nitrile
B 300 Ohms 30 mA 15 mA
C 800 Ohms 30 mA 15 mA
D 22 Ohms 80 mA 40 mA

Code Connector over Flow P to C2 with:

P Port P (+) signal to A, C
B Port C2 (+) signal to A, C
A Port C1 (+) signal to A, C
T Port T (+) signal to A, C

Weight: 1.0 kg (2.2 lbs.)

Cable with mating connector: EHC154S
Bolt kit: 4 of M8 x 60 mm, or 4 of 5/16-18x2.25"
Flushing valve: 1200127 (does not cover 5th port)
U.S. Subplate, 5 ports: 1402303 (4) #12 SAE side ports, (1) #4 SAE side ports
U.S. Subplate, 4 ports: 810090-3 (4) #12 SAE side ports
Metric Subplate, 4 ports: DS04SPS12M (M27 x 2.0 ISO 6149 side ports)
Electronics: BD101, 23-7030, BD90, or BD95

C01_Cat2550.indd, ddp, 04/19

C59 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog MSG14-2550/US Servovalves
Performance Curves Series SE20

Frequency Response at 210 Bar (3000 PSI)

Standard Response High Response
SE20 – 4 LPM (1.0 GPM) SE20 – 4 LPM (1.0 GPM)

Amplitude ratio (dB)

Amplitude ratio (dB)

0 0

-2 -2
-4 -4
-6 -6
-8

C
±25% -8
±25%
±100% ±100%
Phase lag (degrees)

100

Phase lag (degrees)

100
75 75
50 50
25 25
0 0
5 10 20 40 60 100 200 400 5 10 20 40 60 100 200 400
Frequency (Hz) Frequency (Hz)

Standard Response High Response

SE20 – 63 LPM (16.5 GPM) SE20 – 40 LPM (10 GPM)
Amplitude ratio (dB)
Amplitude ratio (dB)

0 0

-2 -2

-4 -4

-6 -6
±25%
-8 -8
±25%

±100% ±100%
Phase lag (degrees)

100
Phase lag (degrees)

100

75 75

50 50

25 25
0 0
5 10 20 40 60 100 200 400 5 10 20 40 60 100 200 400
Frequency (Hz) Frequency (Hz)

C01_Cat2550.indd, ddp, 04/19

C60 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog MSG14-2550/US Servovalves
Technical Information Series SE20

Performance Curves
Step Response at 210 Bar (3000 PSI)
Standard Response High Response

100 100
4 LPM 4 LPM
63 LPM 40 LPM
(1 GPM) (1 GPM)
(16.5 GPM) (10 GPM)

75 75

Input signal [%]

Input signal [%]

50 50 C
25 25

0 0
0 5 10 15 20 0 2 4 6 8
time [ms] time [ms]

Installation Wiring Options

This servovalve has two coils. When connecting the valve to a drive amplifier, the user’s external wiring may put
the coils either in parallel or in series as needed. Refer to the illustrations below and to the mounting pattern for
this valve to insure proper control phasing.

A B C D A B C D

Parallel Series

+ + -
-

Polarity shown connects flow from P to C2 port.

C01_Cat2550.indd, ddp, 04/19

C61 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog MSG14-2550/US Servovalves
Dimensions Series SE20
Inch equivalents for millimeter dimensions are shown in (**)

71.7
(2.82)
39.0
(1.54)

2.4 (0.09)
44.4 40.0 diameter pin

C (1.75)
88.8
(3.50)
12.5
(0.49)
(1.57)
80.0
(3.15)

64.8 1. Suggested mounting bolts M8 x 60 mm

(2.55) or 5/16-18 x 2.00" high tensile steel,
socket-head cap screws.
2. The 4-way electrical connector mates
Mounting Torque with MS3106-14S-2S or equivalent. It is
R 29 Nm (21.4 lb.-ft.) available at ±90° and 180° to position
shown (advise desired position at time of
C2
64.8 order).
12.7 (2.55) 3. Base O-Rings: 10.82 I/D x 1.78 section
(0.50) C1
pilot (2013N-9 or 2013V-9) 5 pcs.
P
4. Null adjust requires 10 A/F ring spanner
(10 mm box-end wrench) and 2.5 hexagon
key. Flow out of C1 will increase with
clockwise rotation of key.
9.9
(0.39)
x

Mounting Surface F1 F2

1. The minimum depth of hole G is 2 mm (0.079 in.). P

y G X
The ISO recommended full-thread depth is
22 mm (0.866 in.).
C2
2. Surface roughness Ra < 0.8 µm [N6], as specified in C1
ISO 468 and ISO 1302.
3. Surface flatness: 0.025 mm (0.001 in.) as specified in R
ISO 1101.
F4 F3

Metric Dimensions (mm) (± 0.1 mm)

P C1 R C2 G X F1 F2 F3 F4
Axis
Ø 8.2 max Ø 8.2 max Ø 8.2 max Ø 8.2 max Ø 3.5 Ø5 M8 M8 M8 M8
x 22.2 11.1 22.2 33.3 12.3 33.3 0 44.4 44.4 0
y 21.4 32.5 43.6 32.5 19.8 8.7 0 0 65.0 65.0

U.S. Dimensions (inches) (± 0.004 in.)

P C1 R C2 G X F1 F2 F3 F4
Axis
Ø 0.32 Ø 0.32 Ø 0.32 Ø 0.32 Ø 0.14 Ø 0.2 5/16 - 18 5/16 - 18 5/16 - 18 5/16 - 18
max. max. max. max. max.
x 0.875 0.437 0.875 1.311 0.484 1.310 0 1.750 1.750 0
y 0.846 1.280 1.717 1.280 0.780 0.343 0 0 2.562 2.562

C01_Cat2550.indd, ddp, 04/19

C62 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA