Download as pdf or txt
Download as pdf or txt
You are on page 1of 45

Crochet pattern

"Christmas ornaments"
designer miranda aivazyan

@zayka_mi_amigurumi

MY INSTAGRAM - @ZAYKA_MI_AMIGURUMI

November 2022
02

Dear crochet lovers!

Thank you for purchasing my pattern. Please, note that this


pattern does not include the lessons in crocheting. You
must have previous knowledge of crochet techniques and
know how to make the stitches mentioned in the section of
Abbreviation.
I would love to see your ready toys through the hashtag:
#вяжусзайкой on Instagram.
I will be glad to show your toys to my followers!
You are allowed to share the images or sell the ready toy
that you make with this pattern but please give me the
credit for the design @zayka_mi_amigurumi.
Enjoy crocheting!

This pattern is a work of authorship and it intends


only for personal use. Full or partial reproduction
and distribution, sales, and publications of pattern
and videos on the Internet are forbidden.

designed by miranda aivazyan - @zayka_mi_amigurumi


03
The required materials:
1. Yarn Art Jeans 50gr/160m (55% cotton, 45% polyamide). Green
No.69, red No.90, brown No.70, white No.62, orange No.23, mustard
No.84, yellow No.35, black No.53, milky No.03, light beige No.05, pink
No.20, beige No.07.

2. Yarn Alize Softy color No55 (white) for a border of a cap.

3. Yarn Alize Cotton Gold 100gr/330m (55% cotton/45% acrylic)


terracotta color No36 for a dog.

4. Yarn Art Mink brown yarn No333 for a forelock of a dog.

5. Yarn Iris 25gr/150m (100% cotton).


White, black, pink, light blue. You can use any other yarn, but make sure
it is thinner than the basic yarn.

designed by miranda aivazyan - @zayka_mi_amigurumi


04

6. 2 mm crochet hook.
7. Safety eyes d=6 mm.
8. Dry pink pastel.
9. Stuffing material (fiberfill/polyester).
10. Tapestry needle.
11. Scissors, stitch marker (a scrap of contrasting yarn).
12. Bell for Santa Claus cap.
The finished product using the materials stated in this pattern is
~1.97-2.36 inches / 5-6 cm tall.

Abbreviations (US):

MR – magic ring
ch – chain
sc – single crochet
inc – increase (crochet 2 sc in one stitch)
dec – decrease (crochet 2 sc together)
sl st – slip stitch
dc – double crochet
tr – treble crochet
hdc – half double crochet
BLО – back loops only
(...)* - work instructions within brackets as many times as
directed

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
06
Snowman.
Head:
With white yarn. Stuff as you crochet.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. (3 sc, inc)*6 (30)
6-9. 4 rounds (30)
10. 7 sc, 6 inc, 4 sc, 6 inc, 7 sc (42)
11-14. 4 rounds (42)
If you use safety eyes, then it is time to install them. Place the eyes
between rounds 9 and 10. The distance between the eye stems is 5 sc
(in the last and first increases of round 10).
15. (5 sc, dec)*6 (36)
16. (4 sc, dec)*6 (30)
17. (3 sc, dec)*6 (24)
18. (2 sc, dec)*6 (18)
19. (sc, dec)*6 (12)
20. 6 dec
Break yarn, tighten the hole and hide the yarn tail.

Cap:
With black yarn.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. BLO: 18 sc
5. (sc, dec)*6 (12)
6-7. 12 sc
8. BLO: (sc, inc)*6 (18) 9. 18 sc
Fasten off and break yarn.

designed by miranda aivazyan - @zayka_mi_amigurumi


07
Nose:
Chain 8 with orange yarn and form a circle with sl st.
Continue crocheting in spirals.
1. 8 sc
2. BLO: 8 sc
3. (2 sc, dec)*2 (6)
4. 6 sc
5. 3 dec
Break yarn, leaving a long yarn tail. Tighten the hole
using a tapestry needle.
Pull the yarn tail to the beginning of the nose.
Stuff with fiberfill.

Assembly.
Mouth and eye sculpting.
Thread the needle with Iris yarn matching the color of the head and tie a
knot at the bottom of the head (where we have finished crocheting). Draw
the needle out at the outer corner of the eye, insert it at the inner corner
of the eye, and draw it out under the muzzle (at the initial point). Skip 1
stitch and repeat with the other eye. Tighten the yarn and deepen the eye
sockets. Make the mouth socket between rounds 15 and 16.
Draw the needle out at the outer corner of the eye, insert it in the inner
corner and draw it out between rounds 15 and 16 (mouth). Skip 1 stitch to
the left, insert the needle, and draw out at the outer corner. Tighten the
yarn, insert the needle in the inner corner and draw it out under the
muzzle. Tighten the yarn one more time.
Break yarn and secure it.

Click on the link to watch a video about sculpting the muzzle.

designed by miranda aivazyan - @zayka_mi_amigurumi


08

- embroider the glares on the outer side of the eye with light blue thread;
- embroider the eyebrows with black thread;
- embroider the cheeks with pink thread;
- sew the nose between rounds 12 and 13 of the eyes (the width of the
nose is 2 rows);
- sew the cap to the head in round 7. Stuff with fiberfill as you crochet;
- decorate the cap with red thread.

Snowman is finished!

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
10
Santa Claus.
Head:
With light beige yarn. Stuff as you crochet.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. (3 sc, inc)*6 (30)
6-9. 4 rounds (30)
10. 7 sc, 6 inc, 4 sc, 6 inc, 7 sc (42)
11-14. 4 rounds (42)
If you use safety eyes, then it is time to install them. Place the eyes
between rounds 9 and 10. The distance between the eye stems is 5 sc
(in the last and first increases of round 10).
15. (5 sc, dec)*6 (36)
16. (4 sc, dec)*6 (30)
17. (3 sc, dec)*6 (24)
18. (2 sc, dec)*6 (18)
19. (sc, dec)*6 (12)
20. 6 dec
Break yarn, tighten the hole and hide the yarn tail.

designed by miranda aivazyan - @zayka_mi_amigurumi


11
Beard:
With white yarn.
1. 8 sc into MR
2. 8 sc
3. (2 sc, 2 inc)*2 (12)
4. 3 sc, 2 inc, 4 sc, 2 inc, sc (16)
5. 4 sc, 2 inc, 6 sc, 2 inc, 2 sc (20)
6. 5 sc, 2 inc, 8 sc, 2 inc, 3 sc (24)
7. 6 sc, 2 inc, 10 sc, 2 inc, 4 sc (28)
8. 9 sc (do not complete this row)
Flatten together and crochet 14 sc through both loops across.
Break yarn, leaving a long tail for sewing.

Mustache:
With white yarn.
1. 6 sc into MR
2. sc+dc in one stitch.
Break yarn, leaving a long tail.

designed by miranda aivazyan - @zayka_mi_amigurumi


12
Cap:
Start crocheting with red yarn. Do not stuff.
1. 4 sc into MR
2. 4 inc (8)
3-4. 2 rounds (8)
5. (sc, inc)*4 (12)
6-7. 2 rounds (12)
8. (2 sc, inc)*4 (16)
9-10. 2 rounds (16)
11. (3 sc, inc)*4 (20)
12-13. 2 rounds (20)
14. (4 sc, inc)*4 (24)
15-16. 2 rounds (24)
17. (3 sc, inc)*6 (30)
18-19. 2 rounds (30)
20. (4 sc, inc)*6 (36)
21-22. 2 rounds (36)
23. (5 sc, inc)*6 (42)
24-25. 2 rounds (42)
Change to white Alize Softy yarn. Secure red yarn,
leaving a long yarn tail. We will attach the top of the
cap to the cap with it.
26. 42 sc with a double yarn
Break yarn and secure it.
Turn the edge of the cap and attach it with red yarn.
Sew the bell.

designed by miranda aivazyan - @zayka_mi_amigurumi


13
Assembly.
Eye sculpting.
Thread the needle with Iris yarn matching the color of the head and tie a
knot at the bottom of the head (where we have finished crocheting). Draw
the needle out at the outer corner of the eye, insert it at the inner corner
of the eye, and draw it out under the muzzle (at the initial point). Skip 1
stitch and repeat with the other eye. Tighten the yarn and deepen the eye
sockets. Fasten off and break yarn.

- embroider the nose between rounds 10 and 11 (the width of the nose is
2 sc) with basic color yarn. Make 5 stitches;
- embroider the eye glares on the outer side of the eyes;
- embroider the eyelids with black thread;
- embroider the cheeks with pink thread;
- embroider the eyebrows with white thread;

designed by miranda aivazyan - @zayka_mi_amigurumi


14

- sew the cap to the head in round 25;


- sew the beard in round 13;
- sew the mustaches under the nose.

Santa Claus is finished!

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
16
Bunny.
Head:
With milk color yarn. Stuff as you crochet.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. (3 sc, inc)*6 (30)
6-9. 4 rounds (30)
10. 7 sc, 6 inc, 4 sc, 6 inc, 7 sc (42)
11-14. 4 rounds (42)
If you use safety eyes, then it is time to install them. Place the eyes
between rounds 9 and 10. The distance between the eye stems is 5 sc
(in the last and first increases of round 10).
15. (5 sc, dec)*6 (36)
16. (4 sc, dec)*6 (30)
17. (3 sc, dec)*6 (24)
18. (2 sc, dec)*6 (18)
19. (sc, dec)*6 (12)
20. 6 dec
Break yarn, tighten the hole and hide the yarn tail.

Sculpt the muzzle of the bunny similar to the snowman.

designed by miranda aivazyan - @zayka_mi_amigurumi


17

- embroider the nose in round 11 (the width of the nose is 2 sc) with pink
thread. Make one vertical stitch from the nose to the mouth;
- embroider the eye glares on the outer side of the eye with white thread;
- embroider the eyebrows and eyelashes with black thread.
Ears (make 2):
With milk color yarn.
1. 6 sc into MR
2. (sc, inc)*3 (9)
3. (2 sc, inc)*3 (12)
4. (3 sc, inc)*3 (15)
5. (4 sc, inc)*3 (18)
6-11. 6 rounds (18)
12. (sc, dec)*6 (12)
13. 12 sc
Flatten together and crochet 5 sc through both loops across. Fold it in
half again and sew it.
Break yarn, leaving a long yarn tail for sewing.

designed by miranda aivazyan - @zayka_mi_amigurumi


18

- sew the ears to the head of the bunny;


- put pink rouge on the cheeks.

Bow:
With red yarn.
Chain 2 and start crocheting in the second chain from hook (sc, chain 4,
3 tr, chain 4)*2, sl st
Tighten and tie the bow to the middle.
Break yarn, leaving a long tail for sewing.
Sew the bow to the ear of the bunny.

The bunny is finished!

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
20
Deer.
Head:
With beige yarn. Stuff as you crochet.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. (3 sc, inc)*6 (30)
6-9. 4 rounds (30)
10. 7 sc, 6 inc, 4 sc, 6 inc, 7 sc (42)
11-14. 4 rounds (42)
If you use safety eyes, then it is time to install them. Place the eyes
between rounds 9 and 10. The distance between the eye stems is 5 sc
(in the last and first increases of round 10).
15. (5 sc, dec)*6 (36)
16. (4 sc, dec)*6 (30)
17. (3 sc, dec)*6 (24)
18. (2 sc, dec)*6 (18)
19. (sc, dec)*6 (12)
20. 6 dec
Break yarn, tighten the hole and hide the yarn tail.

designed by miranda aivazyan - @zayka_mi_amigurumi


21
Muzzle:
With white yarn.
1. 6 sc into MR
2. 3 sc in one stitch, 2 sc, 3 sc in one stitch, 2 sc (10) 3. sc, 2 inc, 3 sc, 2
inc, 2 sc (14)
4. 3 sc, inc, 6 sc, inc, 3 sc (16)
Break yarn, leaving a long tail for sewing.

Ears (make 2):


With beige yarn.
1. 6 sc into MR
2. 6 inc (12)
3. 4 sc, hdc, hdc+dc+hdc in one stitch, hdc, 4 sc, sl st. Tighten and leave
a long yarn tail for sewing. Flatten together and make a few stitches
along the edge, making the ear looks turned.

designed by miranda aivazyan - @zayka_mi_amigurumi


22
Antlers (make 2):
With brown yarn. Do not stuff.
The small part.
1. 5 sc into MR
2. 5 sc
Fasten off and break yarn. The big part
1. 5 sc into MR
2-4. 3 rounds (5)
Do not break yarn. Insert the hook in any stitch of the second row of the
small part and join both parts as follows:
5. 5 sc to a small part, 5 sc a big part (10)
6. 4 sc, 2 dec (6)
Break yarn, leaving a long yarn tail for sewing. Crochet the other antler
similarly.

designed by miranda aivazyan - @zayka_mi_amigurumi


23
Assembly.
Sculpt the eye sockets similar to Santa Claus (as guided above)
- sew the muzzle under the eyes between rounds 11 and 14 (the width of
the muzzle is 4 rows);
- embroider the nose in the center of the upper part of the muzzle with
red yarn;
- embroider the eye glares on the outer side of the eye with white thread;
- embroider the eyelids and eyebrows with black thread;
- sew the antlers to the third round of the head;
- sew the ears under the antlers;
- embroider the spots on the head with white thread.

The deer is finished!

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
25
Gingerbread man.
Head:
With mustard color yarn. Stuff as you crochet.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. (3 sc, inc)*6 (30)
6-9. 4 rounds (30)
10. 7 sc, 6 inc, 4 sc, 6 inc, 7 sc (42)
11-14. 4 rounds (42)
If you use safety eyes, then it is time to install them. Place the eyes
between rounds 9 and 10. The distance between the eye stems is 5 sc
(in the last and first increases of round 10).
15. (5 sc, dec)*6 (36)
16. (4 sc, dec)*6 (30)
17. (3 sc, dec)*6 (24)
18. (2 sc, dec)*6 (18)
19. (sc, dec)*6 (12)
20. 6 dec
Break yarn, tighten the hole and hide the yarn tail.

designed by miranda aivazyan - @zayka_mi_amigurumi


26
Glaze:
With white yarn.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. (3 sc, inc)*6 (30)
6. 30 sc
7. - 3 sc, chain 4, in the second chain from hook 3 hdc, sc in the next
stitch;
- 3 sc, chain 3, in the second chain from hook 2 hdc, sc in the next stitch;
- 3 sc, chain 4, in the second chain from hook 3 hdc, sc in the next stitch;
- 3 sc, chain 3, in the second chain from hook 2 hdc, sc in the next stitch;
- 3 sc, chain 4, in the second chain from hook 3 hdc, sc in the next stitch;
- 3 sc, chain 3, in the second chain from hook 2 hdc, sc in the next stitch;
- 3 sc, chain 4, in the second chain from hook 3 hdc, sc in the next stitch;
- 3 sc, chain 3, in the second chain from hook 2 hdc, sc in the next stitch;

Break yarn, leaving a long yarn tail for sewing. Embroider the sprinkles
with colorful yarn.

designed by miranda aivazyan - @zayka_mi_amigurumi


27

Cheeks:
With pink yarn.
1. 6 sc into MR
Break yarn, leaving a long yarn tail for
sewing.

Assembly.
Sculpt the eyes similar to Santa Claus (as guided above)
- embroider the nose between rounds 10 and 11 with the basic color yarn
(the width of the nose is 2 sc). Make 5 stitches;
- embroider the glares on the outer side of the eye with white thread;
- embroider the eyelids and smile with black thread;
- sew the cheeks;
- pin the glaze and sew it.

The Gingerbread man is finished!

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
29
Girl.
Head:
With light beige yarn.
Crochet as guided in the pattern for the snowman (see above)

Wig:
The first part.
With yellow yarn.
1. 7 sc into MR
2. 7 inc (14)
3. (sc, inc)*7 (21)
4. (2 sc, inc)*7 (28)
5-10. 6 rounds(28)
Break yarn, leaving a long yarn tail for sewing.
The second part.
1. 4 sc into MR
2. 4 inc (8)
3-4. 2 rounds (8)
5. (sc, inc)*4 (12)
6-7. 2 rounds (12)
8. (2 sc, inc)*4 (16)
9. 16 sc
Break yarn, leaving a long yarn tail for sewing.

designed by miranda aivazyan - @zayka_mi_amigurumi


30
Hair for the second part:
With yellow yarn (chain 11, in the 2nd chain from hook 10 sl st)*3 times
Break yarn, leaving a long yarn tail for sewing.

Hair for the second part (male 2):


With yellow yarn (chain 51, in the 2nd chain from hook 50 sl st)*3 times
Break yarn, leaving a long yarn tail for sewing.
Crochet the second hair strand similarly.

Bow:
With red yarn.
Chain 2 and start crocheting in the second chain from hook (sc, chain 3,
2 dc, chain 3)*2, sl st.
Tighten and tie the bow in the middle.
Break yarn, leaving a long yarn tail for sewing.

designed by miranda aivazyan - @zayka_mi_amigurumi


31
Assembly.
Sculpt the eyes similar to Santa Claus (as guided above)
Pin the wig (the first part) to the head (see photo). Sew it through back
loops.

Pin the second part to the head between rounds 4 and 7 (the width is 4
rows) – (see photo).
Sew it through back loops.
Sew the short hair (see photo).

designed by miranda aivazyan - @zayka_mi_amigurumi


32

Mark the points of the hair with a scrap of contrasting yarn.

Embroider hair with yellow yarn, as guided in the photo.

designed by miranda aivazyan - @zayka_mi_amigurumi


33
Embroider the nose between rounds 10 and 11 with basic color yarn
(the width of the nose is 2 sc) – see photo.

- embroider the glares on the outer side of the eyes with white thread;
- embroider the eyelids with black thread;
- embroider the eyelashes with black thread;
- embroider the mouth between rounds 13 and 14 with pink thread (the
width is 3 sc);
- put pink rouge on the cheeks;
- sew long hair on both sides of the head between rounds 12 and 13 (see
photo);

designed by miranda aivazyan - @zayka_mi_amigurumi


34
- braid the hair strands and tie them with a scrap of yarn;
- secure the braids to the top of the head and sew the bow;

The girl is finished!

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
36
Dog.
Head:
With terracotta color yarn. Stuff as you crochet.
1. 6 sc into MR
2. 6 inc (12)
3. 2 sc, inc, 6 sc, inc, 2 sc (14)
4-8. 5 rounds (14)
9. 4 sc, 6 inc, 4 sc (20)
10. (sc, inc)*10 (30)
11. 7 sc, (inc, 2 sc)*6, 5 sc (36)
12-16. 5 rounds (36)
If you use safety eyes, then it is time to install them. Place the eyes
between rounds 9 and 10. The distance between the eye stems is 6 sc.
17. (4 sc, dec)*6 (30)
18. (3 sc, dec)*6 (24)
19. (2 sc, dec)*6 (18)
20. (sc, dec)*6 (12)
21. 6 dec
Break yarn, tighten the hole and hide the yarn tail.

designed by miranda aivazyan - @zayka_mi_amigurumi


37
Ears (make 2):
With brown yarn. Do not stuff.
1. 6 sc into MR
2. 6 inc (12)
3-5. 3 rounds (12)
6. (2 sc, dec)*3 (9)
7-9. 3 rounds (9)
10. (sc, dec)*3 (6)
11-12. 2 rounds (6)
Flatten together and crochet 3 sc through both loops across.
Break yarn, leaving a long tail for sewing.
Assembly.
- embroider the eye glares on the outer side of the eye with white thread;
- embroider the nose in round 2 with black thread (the width is 3 sc).
Draw thread out under the nose, skip 3 rows to the bottom, and
embroider the smile (the width is 5 sc);
- embroider the eyebrows between rounds 11 and 12 with brown thread.
The distance between the eyebrows is 4-5 sc;
- Sew the ears to the sides of the head symmetrically to each other.
Skip 4 rows from the eyes.

designed by miranda aivazyan - @zayka_mi_amigurumi


38
- Mark the position of sewing the forelock between rounds 13 and 16 (the
width is 4 sc). Embroider the forelock with Mink yarn, making 5-6 stitches.
Fluff the forelock using a tapestry needle.

The dog is finished!

designed by miranda aivazyan - @zayka_mi_amigurumi


designed by miranda aivazyan - @zayka_mi_amigurumi
40
Grinchmas.
Head:
With green yarn. Stuff as you crochet.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. (3 sc, inc)*6 (30)
6-10. 5 rounds (30)
11. 7 sc, 6 inc, 4 sc, 6 inc, 7 sc (42)
12-15. 4 rounds (42)
If you use safety eyes, then it is time to install them. Place the eyes
between rounds 10 and 11. The distance between the eye stems is 5 sc.
(in the last and first increases of round 10).
16. (5 sc, dec)*6 (36)
17. (4 sc, dec)*6 (30)
18. (3 sc, dec)*6 (24)
19. (2 sc, dec)*6 (18)
20. (sc, dec)*6 (12)
21. 6 dec
Break yarn, tighten the hole, and hide the yarn tail.

designed by miranda aivazyan - @zayka_mi_amigurumi


41
Cap:
With red yarn. Do not stuff.
1. 4 sc into MR
2. 4 inc (8)
3-4. 2 rounds (8)
5. (sc, inc)*4 (12)
6-7. 2 rounds (12)
8. (2 sc, inc)*4 (16)
9-10. 2 rounds (16)
11. (3 sc, inc)*4 (20)
12-13. 2 rounds (20)
14. (4 sc, inc)*4 (24)
15-16. 2 rounds (24)
17. (3 sc, inc)*6 (30)
18-19. 2 rounds (30)
20. (4 sc, inc)*6 (36)
21-22. 2 rounds (36)
Change to white yarn. Break red yarn, leaving a long
yarn tail. We will attach the top of the cap to the cap.
23. (5 sc, inc)*6 (42)
24-25. BLO: 2 rounds (42)
Break yarn, leaving a long yarn tail for sewing.
Attach white yarn to the last white loop of round 23
(see photo) and chain 3. Crochet sl st in the next loop
and chain 3 again. Crochet sl st in the next loop.
Continue crocheting into all white loops (3 rounds).
Break yarn, secure and hide the tail.

designed by miranda aivazyan - @zayka_mi_amigurumi


42
Pom pom:
Crochet all rounds through back loops only with white yarn.
1. 6 sc into MR
2. (sc, inc)*3 (9)
3. 9 sc
4. (sc, dec)*3 (6)
5. 3 dec
Stuff with fiberfill.
Fasten off and break yarn.
Attach white yarn to the first loop of round 1, chain 3, and crochet sl st in
the next loop. Chain 3 again and crochet sl st in the next stitch. Continue
crocheting to all white loops. Break yarn, leaving a long tail for sewing the
pom pom to the cap.

Turn the edge of the cap and attach it with red yarn.

For toys on the tree.


Chain 45 with red yarn, leaving a tail for sewing.
Sew the loop to the cap.

designed by miranda aivazyan - @zayka_mi_amigurumi


43
Assembly.
Eye sculpting.
Thread the long needle with Iris yarn matching the color of the head and
tie a knot at the bottom of the head (where we have finished crocheting).
Draw the needle out at the outer corner of the eye, insert it at the inner
corner of the eye, and draw it out under the muzzle (at the initial point).
Skip 1 stitch and repeat with the other eye. Tighten the yarn and sculpt
the eye sockets. Fasten off and break yarn.
Click on the link to watch a video about eye sculpting.

- embroider the glares on the outer sides of the eyes with yellow thread;
- embroider the eyelids with green thread;
- embroider the eyelashes with black thread;
- embroider the nose between rounds 11 and 12 (the width is 2 sc) with
black thread, making about 5 stitches;
- embroider the mouth with black thread as guided in the photo;
- embroider the eyebrows with a double green thread;
- sew the cap to the head;
Grinchmas is finished!
designed by miranda aivazyan - @zayka_mi_amigurumi
44
Collar:
With red yarn.
1. 6 sc into MR
2. 6 inc (12)
3. (sc, inc)*6 (18)
4. (2 sc, inc)*6 (24)
5. chain 2, crochet through front loops: 2 dc in each stitch. Crochet 3 dc
in each stitch if you want to make more folds.​
Break yarn, leaving a long yarn tail for sewing.​
​Crochet around the collar with sl st and red yarn.​
Attach a contrasting yarn to the last stitch of round 5, chain 2, turn the
work, and crochet sl st through front loops.
Sew the collar to the bottom of the toy through free (unused) loops of
the 4th round.

designed by miranda aivazyan - @zayka_mi_amigurumi


45

I hope you enjoyed the process of crocheting


and the result done!
Thank you for crocheting with me!

Please don't forget to mention me @zayka_mi_amigurumi whenever


you post one of my toys. Thank you so much for taking advantage of
my crochet instructions! I will be very pleased to see your work!

MY INSTAGRAM - @ZAYKA_MI_AMIGURUMI

designed by miranda aivazyan - @zayka_mi_amigurumi

You might also like