The document discusses various types of earth moving operations and equipment. It describes excavation as digging earth and moving it to another location. The main types of excavation discussed are bulk pit excavation, bulk wide-area excavation, loose bulk excavation, limited area vertical excavation, trench excavation, tunnel excavation, and dredging. Equipment used for excavating and carrying earth include clamshells, bulldozers, and tractor-pulled scrapers.
The document discusses various types of earth moving operations and equipment. It describes excavation as digging earth and moving it to another location. The main types of excavation discussed are bulk pit excavation, bulk wide-area excavation, loose bulk excavation, limited area vertical excavation, trench excavation, tunnel excavation, and dredging. Equipment used for excavating and carrying earth include clamshells, bulldozers, and tractor-pulled scrapers.
The document discusses various types of earth moving operations and equipment. It describes excavation as digging earth and moving it to another location. The main types of excavation discussed are bulk pit excavation, bulk wide-area excavation, loose bulk excavation, limited area vertical excavation, trench excavation, tunnel excavation, and dredging. Equipment used for excavating and carrying earth include clamshells, bulldozers, and tractor-pulled scrapers.
University of Engineering & Technology, Taxila, Pakistan Earth Moving Operations The first basic operation in any construction project is of earth- moving. Land has to be cleared from jungle or vegetation before any building activity can be started, which may be of making roads, buildings, embankments or drainage works. The excavation involves digging large quantity of earth and moving them to distance often fairly long. The operations of ripping, leveling, grading, and compacting earth are called earth- moving operations, which are necessary on large works. Excavation of Earth Scope of Work After obtaining some idea of the quality of materials to be excavated, by means of boring and subsequent classification, we must determine the quantity of material to be moved and the scope of operations. Excavation of Earth Scope of Work The scope of earthwork operations depends upon the following factors: 1. The total quantity of earth to be moved; 2. The location of the excavation site; 3. Its relative width, breadth and depth; 4. The type of soil to be moved; 5. The final decomposition (dumping) to be made of the excavated material. Types of Excavation
Excavation falls into the following types, depending on the
factors noted above: a. Bulk-pit excavation b. Bulkwide-area excavation c. Loose bulk excavation d. Limited-area, vertical excavation e. Trench excavation f. Tunnel excavation g. Dredging Types of Excavation a. Bulk-pit Excavation Types of Excavation a. Bulk-pit Excavation It is primarily excavation of considerable depth, as well as substantial volume or bulk that must be hauled from the site of the operations. In this kind of excavation, the equipment used is operated against the face of the bank from its lower level, and the excavated material is loaded into the vehicles at the bottom of the pit to be hauled away from the site. The resulting pit has vertical or nearly vertical walls because of site limitation, such as adjoining streets or buildings. Types of Excavation b. Bulk Wide-area Excavation Types of Excavation b. Bulk Wide-area Excavation It may also have considerable depth and total volume and may also require that the material be hauled away. In this kind of excavation, however, there is complete access to the site from many directions, and the excavation banks can be sloped flatly on two or more sides. It is usually shallower in depth, but larger in area. The excavated material is hauled a shorter distance and deposited over an area similar to that from which it is dug, e.g.; in the construction of an embankment for highway or airport runway. Types of Excavation c. Loose Bulk Excavation Types of Excavation c. Loose Bulk Excavation It differs from the previous two types in the character of the materials to be excavated; wet clays and silts in unconsolidated formations, the bulk of which is not hauled away but simply cast into a new position. Excavations for canals and embankments are the general type. Types of Excavation d. Limited Area, Vertical Excavation Types of Excavation d. Limited Area, Vertical Excavation This method of excavation is used in loose or wet soils, unconsolidated formations; where the banks must be supported by shoring or sheeting (timbering).The material must be lifted out vertically. Types of Excavation e. Trench Excavation Types of Excavation e. Trench Excavation In this type, the width of operations and generally, the depth is limited. Trenching may be performed in any soil, and will sometimes fall into the category of limited-area, vertical excavation. Types of Excavation f. Tunnel Excavation Types of Excavation f. Tunnel Excavation It is limited in width, as in trenching, and in depth or height, it is carried out completely underground. Types of Excavation g. Dredging Types of Excavation g. Dredging It is the removal of soil from underwater, using the water as means of transportation to convey the soil to final positions. Remodeling of canals and surface drains falls under this category. Draglines are more suited for such works. Earth Moving Equipments
Excavation is the process through which earth is dug from one
place and deposited to another. It, thus, includes the two operations of digging and shifting of earth. There are machines, which perform both of these two operations, unaided by any other agency. Such machines may be called as ‘Excavating and Carrying machines’. However, in several other cases, these two operations are accomplished through a combination of two or more machines. Digging being done by machines, which are called purely ‘Excavating’ and shifting by units called ‘Carriers’. Earth Moving Equipments
Some examples of these machines are:
Excavating and Carrying (Clamshells, Bulldozers, Tractor pulled Scrapers, etc.) Purely Excavating (Draglines, Front Shovels, Backhoe, Elevating graders, etc.) Carrier Units (Dump Trucks, Trailers, Wagons, etc.) Excavating and Carrying 1. Clamshells Excavating and Carrying 1. Clamshells Excavating and Carrying 1. Clamshells Clamshells are used primarily to handle loose materials, such as sand, gravel, crushed stone, coal, etc. and for removing materials from cofferdams, pier foundations, sewer manholes, sheet-lined trenches etc. They are specially suited for lifting materials vertically from one location to another, as discharging in hoppers and over head bins. Vertical movement capability may be relatively large when Clamshells are used with long crane booms. Excavating and Carrying 1. Clamshells Clamshell buckets are available in various sizes and weights e.g. heavy-duty types for digging, medium-weight types for general- purpose works, and light weight types for re-handling light materials. Manufacturers supply buckets either with removable teeth or without teeth. Teeth are used in digging the harder types of materials but are not required when a bucket is used for re-handling purposes. The capacity of a clamshell buckets is usually expressed in cubic yards or cubic feet given in terms of heaped-measure. Excavating and Carrying 2. Bull Dozers Excavating and Carrying 2. Bull Dozers (Backhoe) Excavating and Carrying 2. Bull Dozers The term Bull dozer may be used in a broad sense to include both a Bull dozer and an Angle dozer. Bull dozers are mounted with the blades perpendicular to the direction of travel, while Angle dozers are mounted with the blades set an angle with the direction of travel. The former push the earth forward, while the latter push it forward and to one side. The length and height of the blade indicate the size of a bulldozer. Excavating and Carrying 2. Bull Dozers These machines may be further divided on the basis of their mountings, into crawler-tractor or wheel-tractor mounted. Based on the method of lowering and raising their blade, Bulldozer may be classified as cable or hydraulic controlled. Each type of equipment has a place in the construction industry. Excavating and Carrying 2. Bull Dozers Bull dozers are versatile machines on many construction projects and may be used for the following purposes: Clearing land from timber and stumps. Opening up pilot roads through mountains and rocky terrain. Moving earth for haul distances upto approximately 300 feet. Spreading earth fills. Back filling trenches. Clearing construction sites off debris. Maintaining haul roads. Clearing the floors of borrow and quarry pits. Excavating and Carrying 2. Bull Dozers Moving Earth with Bull dozers Under certain conditions, Bulldozers are satisfactory machines for moving earth for such jobs as excavating ponds for stock water, trench silo sand highway cuts, stripping the top soil from land or ore deposits, back filling trenches, spreading materials on fills, etc. In general, haul distances should be less than 300 feet. Either a crawler-mounted or wheel-mounted tractor may be used to move the Bulldozer; a crawler-mounted machine having an advantage on short hauls with soft or muddy ground, and a wheel-mounted machine having an advantage on longer hauls and firm ground. Excavating and Carrying 3. Tractor - Pulled Scrapers Excavating and Carrying 3. Tractor - Pulled Scrapers Excavating and Carrying 3. Tractor - Pulled Scrapers Tractor-pulled Scrapers have established an important position in the earth-moving field. As these are self-operating, to the extent that they can load, haul or discharge material, they are not dependent on other equipment. The self-operating Scrapers are available with capacity upto 30 cubic yards or more. These machines are the result of a compromise between the best loading and the best hauling machines, but they are not superior to other equipment in both loading and hauling. Power Shovels, Draglines usually will surpass them in loading only, while Truck may surpass them in hauling only, especially when long, well maintained haul roads are used. Excavating and Carrying 3. Tractor - Pulled Scrapers However, their ability to load and haul earth gives them a definite advantage on many projects. The development of high-speed, wheel type Tractors has increased the economic haul distance for this type of equipment upto a mile or more on many projects. The ability of these machines to deposit their loads in uniformly thick layers will facilitate the succeeding spreading operations. On the return trips to borrow pits, the cutting blades of Scrapers may be lowered enough to remove the high spots, there by assisting in maintaining the haul roads. Excavating and Carrying 3. Tractor - Pulled Scrapers Cycle Time The cycle time for a Scraper is the time to load, haul, dump, turn, return, and turn back in to position to pick up another load. Tc= loadt+ hault+ dumpt+ turnt+ returnt+ turnt Loading time fairly remains in the same range regardless of the scraper size. Also, large sized scrapers which carry larger load can load as fast as small machines. Excavating Unit 1. Drag–Lines Excavating Unit 1. Drag–Lines (Uses) Draglines are used to excavate earth and load it in to hauling units, such as Trucks or Wagons, or to deposit it in levees, dams and spoil banks near the pits from which it is excavated. For some projects, either a Power Shovel or a Drag line may be used to excavate the materials, but for others, the Drag line will have a distinct advantage as compared with a Shovel. A Drag line usually doesn’t have to go in to a pit or hole in order to excavate. It may operate on natural ground while excavating material from a pit with its bucket. This will be very advantageous when earth is removed from a ditch, canal or pit containing water. Excavating Unit 1. Drag–Lines (Uses) If the earth is hauled with trucks, they don’t have to go into the pit. If the earth can be deposited along a canal or a ditch or near a pit, It is possible to use a Drag line with a boom long enough to dispose of the earth in one operation, eliminating the need for hauling units, which will reduce the cost of handling of the earth. When the soil is very loose or when water occurs at some distance below the surface, the Drag line is widely used in bulk- pit excavation in lieu of the Power Shovel. It is ideal for handling loose, dry sands and gravel, for this purpose Drag line is more efficient than a Shovel or Scraper. Excavating Unit 1. Drag–Lines (Uses) The Drag line can be used for loading haul units but is less efficient in this operation than the Shovel. It is only where casting is involved that the Dragline is definitely superior. One disadvantage in using the Dragline compared with a Power Shovel is the reduced output of the Dragline. A comparison of the ideal output of various sizes of Draglines with the output of Power Shovels shows that a Dragline will excavate approximately 75 % to 80 % of the earth as that of a Power Shovel of the same size. Excavating Unit 1. Drag–Lines Excavating Unit 1. Drag–Lines Excavating Unit 1. Drag–Lines Excavating Unit 1. Drag–Lines (Size) The size of Dragline is indicated by the size of bucket, expressed in cubic yards, which, in general, is the same size as the dipper of the power shovel in to which it may be converted. However, most Drag lines may handle more than one size bucket, depending on the length of the boom and the class of material excavated. Excavating Unit 2. Power Shovels Excavating Unit 2. Power Shovels Power Shovels are used primarily to excavate earth and load it into trucks or tractor-pulled wagons or on the conveyer belts. They are capable of excavating all classes of earth, except solid rock, without prior loosening. Shovels may vary in sizes from ¾ cu-yd to 4.0 cu-yd, weighing from 6, 7 tons to hundred of tons and boom lengths capable of dumping on roof of a seven storied building. They may have gasoline, diesel or electric drive. Excavating Unit 2. Power Shovels (Size) The size of a Power Shovel is indicated by the size of the bucket, expressed in cubic yards. Power Shovels are commonly available in the following sizes: 3/8, 0.5, 0.75, 1, 1.25, 1.5, 2 and 2.5 cu-yd. Larger sizes may be available, or they can be manufactured on special orders. Excavating Unit 2. Power Shovels (Applications) 1. Embankment Digging It is the necessary purpose for which the Power Shovel was designed, and, at this job, there is no other piece of excavating equipment that can produce equal productions in any type of soil or shattered rock. 2. Loading into Haul Units It is a necessary consequence of embankment digging. There is no more efficient method of loading trucks than with the Power Shovel, although virtually every piece of excavating equipment can be used for loading, if it is not self-loading. Excavating Unit 2. Power Shovels (Applications) 3. Side Casting It is the special case of embankment digging without loading. However, its effectiveness is limited by boom length and by the fact that the casting side must remain lower than the level on which the Shovel rests. 4. Dressing Slopes It is a useful function if the slope results from the embankment digging and the dressing is performed as a part of the excavating process. For general slope grading other equipment should be used. Excavating Unit 2. Power Shovels (Applications) 5. Dumping on Soil Banks Like side casting, it is the function of the Shovel that is limited to special situations. 6. Digging Shallow Trenches It is not a desirable use for a Power Shovel. Since the shovel must dig for ward into the bank of earth, it must span that portion of the trench, which is already dug. This requires a stable, cohesive soil whose bank edges will not crumble. Soils that will support the weight of the Shovel and can still be cut with neat vertical walls are rarely encountered. Hauling Units 1. Trucks and Wagons Hauling Units 1. Trucks and Wagons In handling earth, aggregate and other rock materials, Trucks serve one purpose. They are hauling units, which because of their high speeds, when operating on suitable roads, have high capacities and provide relatively low hauling costs. These trucks are used for hauling materials on large projects, where sizes and costs are justified. Hauling Units 1. Trucks and Wagons Trucks may be classified according to many factors, including the following: Size and type of engine, gasoline, diesel, butane, propane etc. Number of gears. Kind of drive, two wheels, four wheel, six wheels etc. Number of wheels and axles and arrangement of driving wheels. Method of dumping the load, rear dump, side dump. Class of material hauled, earth, rock etc. Capacity in tons or cubic yards. Hauling Units 1. Trucks and Wagons (Capacity) There are at least three methods of expressing the capacities of trucks and wagons; by the load, which it will carry, expressed in tons; by its struck volume; and by its heaped volume, the later two expressed in cubic yards. The struck capacity of a truck is the volume of the material, which it will haul, when it is filled to the top of the sides, with no material above the sides. The heaped capacity is the volume of material, which it will haul, when the load is heaped above the sides. The capacity should be expressed in cubic yards. Hauling Units 1. Trucks and Wagons (Balancing the Capacities) Following steps should be noted in order to balance the capacities of hauling units with the size of excavators: Most construction projects involve some degree of earth moving and excavation. On large highways and infields and dam projects, the bulk of contractor’s cost is in the hauling of earth. However, although hauling is a major factor in the construction industry, there are few analytical procedures for optimizing the combination of earth movers verses loaders in the interest of cost reduction. Hauling Units 1. Trucks and Wagons (Balancing the Capacities) One method, devised by Peurifoy is “Cycle Time Analysis”. To make this type of analysis, the site should be investigated to determine grades, distances, and haul road characteristics. Specifications of each type of haul vehicle should be available. From this known data, haul speeds can be computed for each segment of the route by considering grades, roll resistance, altitudes and acceleration. The cycle time is then computed for a single vehicle, using times obtained from each segment and an estimate of the time lost in travel due to dumping and accelerating. Hauling Units 1. Trucks and Wagons (Balancing the Capacities) Knowing the capacity of the haul unit and the output of the loader (say Power shovel), the loading time is then calculated. The number of haul units is estimated by dividing the cycle time of the haul unit by the loading time of the power shovel. The cost analysis is then done and the same procedure is repeated with different combination of haul unit and the loaders (excavators). The most economical combination is then decided. Factors Affecting Output of Excavation Units The output of a Excavation unit is affected by numerous factors, including the following:
Class of material (soil or rock)
Depth of cut (optimum depth of cut leads to greatest output) Angle of swing (horizontal angle between digging and dumping positions) Job conditions (excellent, good, fair, poor etc.) Management conditions (supervisions and maintenance) Size of hauling units (balanced numbers should be used) Skill of the operator (very important) Physical condition of the Equipment (good maintenance is necessary) Increasing Production Rate of Earth work Allgemein There are at least two methods that a contractor may use to obtain a higher profit on a project involving earth work. One method is to increase the bid prices on the earth work. However, competition usually limits the price, which he may bid, otherwise he loses the probability of winning the bid or tender. The alternative method is to organize and operate his equipment in a manner that will ensure the maximum production at the lowest cost. The latter method usually offers the best opportunity for attainment. Thus, a contractor should strive to increase the production without increasing his costs. Increasing Production Rate of Earth work 1. Ripping Most types of tight soils will load faster, if they are ripped ahead of the Scraper. Additionally, delays pertaining to equipment repairs will be reduced substantially as the Scraper will not be operated under as much strain. If the value of the increased production resulting from ripping exceeds the ripping cost, the material should be ripped. Increasing Production Rate of Earth work 2. Pre-wetting of Soil Some soils will load more easily, if they are reasonably moist. Pre-wetting can be performed in conjunction with ripping or ahead of loading, to permit a uniform penetration of the moisture into the soil. Increasing Production Rate of Earth work 3. Loading Downgrade When it is practicable to do so, scrapers should be loaded down grade and in the direction of haul. Downgrade loading results in faster loading times, whereas, loading in the direction of haul both shortens the length of haul and eliminates the need to turn in the cut with the loaded scraper. Increasing Production Rate of Earth work 4. Supervision Full-time supervisory control should be provided in the cut. A more efficient operation will result through the elimination of confusion and traffic congestion.