Search Results (9)

Background: In low- and middle-income countries, oral health is frequently marginalized due to limited dental care access. This cross-sectional study assesses the outcomes of dental outreach camps in Zanzibar, Tanzania, organized in 2019 and 2023, to understand their impact on addressing local oral health needs over a four-year span. Methods: The study involved a thorough examination and analysis of clinical dental health data from both outreach camps. In 2019, 224 patients were examined, and in 2023, the number increased to 354. The assessment covered various dental health parameters, including dental caries, DMFT/dmft indices, enamel fluorosis, dental trauma, oral mucosa lesions, and non-carious tooth surface loss. Results: The analysis demonstrated a significant reduction in dental caries among adolescents and teens, decreasing from 62.5% in 2019 to 35.59% in 2023 (p < 0.0001). Similarly, the prevalence of teeth missing due to caries showed marked reductions from 40.2% to 9.04% in adolescents and teens (p < 0.0001) and from 25.89% to 11.86% among preschool and school-aged children (p = 0.004). Moreover, a significant change was observed in the Basic Erosive Wear Examination (BEWE) scores, with cases showing no erosive tooth wear (BEWE = 0) decreasing from 49.1% to 33.3% (p = 0.016), and cases with initial loss of enamel surface texture (BEWE = 1) increasing from 47.3% to 61% (p = 0.044). Conclusions: The outreach camps conducted in 2019 and 2023 showed tangible improvements in certain dental health metrics, particularly a reduction in dental caries and missing teeth due to caries among adolescents and teens. However, the uptick in non-carious tooth surface loss points to emerging dental health concerns. These results underline the importance of sustained and targeted dental health interventions to improve oral health outcomes in underserved communities such as Zanzibar. Full article

In modern times, patients are not only seeking oral health but also aiming for a flawless smile. Despite the progress made in aesthetic dentistry, there are instances where insufficient teeth whitening results contrast with the considerable cost of professional treatments. Patient discomfort and the potential for tooth damage further compound these challenges. In this study, we conducted a comparative split-mouth ex vivo investigation to evaluate the innovative BlancOne ULTRA⁺ (IDS SpA) in comparison with established professional products: Opalescence Extraboost (ULTRADENT), Zoom WhiteSpeed (Philips Research Eindhoven High Tech), and Pola Office (SDI Limited). Our initial focus was on the whitening effectiveness of each product, which was measured using a spectrophotometer. Subsequently, we assessed any structural changes in enamel post-treatment using an atomic force microscope (AFM) and a nanoindentation procedure. All tested bleaching agents demonstrated teeth-brightening effects. BlancOne ULTRA⁺, Zoom WhiteSpeed, and Pola Office caused minor alterations in the texture of the enamel surface within nanometric limits. However, Opalescence Extraboost exhibited notably more pronounced changes, indicating significant modifications in surface roughness and potential reductions in material hardness due to consequential shifts in mechanical properties. BlancOne ULTRA⁺ appears to offer the most favourable cost–benefit outcome. Full article

This study proposed using enamel surface texture and thickness for the objective detection and monitoring of erosive tooth wear (ETW), comparing them to the standard subjective Basic Erosive Wear Evaluation (BEWE). Thirty-two subjects (n = 597 teeth) were enrolled in this longitudinal observational clinical study. Enamel thickness (by cross-polarization optical coherence tomography, CP-OCT) and 3D dental microwear parameters, i.e., area-scale fractal complexity (Asfc), anisotropy (Str), and roughness (Sa) (by white-light scanning confocal profilometry), were obtained from buccal surfaces. Buccal, occlusal, and lingual surfaces were scored for BEWE and the maximum score per tooth (BEWE_Max) was determined at baseline and 12 months (M12). Data outcome relationships were evaluated (alpha = 0.05). Enamel thickness decreased (p < 0.001), BEWE scores, Sa, and Str increased (p < 0.001), while Asfc did not change at M12. Baseline BEWE_Buccal correlated strongly with BEWE_Max (r = 0.86, p < 0.001) and moderately with BEWE_Lingual (r = 0.42, p < 0.001), but not with enamel thickness (r = 0.03, p = 0.43). Change (Δ) in surface texture outcomes correlated poorly but significantly with ΔBEWE_Buccal (r = −0.15–0.16, p < 0.001) and did not correlate with Δenamel thickness (r = 0.02–0.09, p > 0.06). Teeth with BEWE progression revealed a greater increase in ΔSa and ΔStr. These findings suggest that enamel surface roughness can potentially determine ETW severity, and CP-OCT may be relevant for clinically monitoring enamel thickness. Full article

Technology and environmental innovations always have a growing emphasis and have affected various industries. Since the cosmetics industry is highly competitive and consumers always desire innovations in products, the cosmetics industry tends to launch new products to satisfy customer desires without exception. Recently, in the area of cosmeceuticals, the application of nanotechnology has been attempting to increase; however, it seems to be tackling certain disadvantages compared to traditional products. Cosmeceuticals based on nanotechnology offer the benefits of product differentiation, improved bioavailability, and prolonged effects of active ingredients. These are widely used as a regulated delivery medium for cosmeceuticals, such as shampoo, nail enamels, lotions, hair serums, and conditioners. Their wide application is attributed to their intrinsic properties, such as rapid penetration, stability, hydrating power, and texture. The ability of the nanoemulsion system to form small- and large-surface nanoparticles enable the bioactive components to be transported into the skin more effectively. Furthermore, natural cosmetics are a general term that refers to all preparations for external conditioning and beautifying of the body from ingredients produced by or found in nature. The purpose of this review is to understand the nature of natural cosmetics which incorporate nanotechnology for better encapsulation and a better drug delivery system. The importance of innovations in the cosmetic industry is also discussed. Full article

Air-abrasion is a popular prophylactic procedure to maintain oral hygiene. However, depending on the applied air-abrasive powder, it can damage the surface of the tooth and restorations, making it susceptible to plaque accumulation. The purpose of this study was to investigate the effect of 5 s and 10 s air-abrasion of calcium carbonate on surface roughness (Ra) of enamel, nanofill, and microhybrid resin-composites and the effect of post-polishing with two-step rubber- (RP) or one-step brush polisher (BP) to re-establish the surface smoothness. Surface topography was visualized by scanning-electron-microscopy. The quantitative measurement of the Ra was carried out with atomic-force-microscopy. Air-abrasion for 10 s decreased the Ra of enamel as a result of abrasion of the natural surface texture. Post-polishing with RP after 10 s air-abrasion did not change the Ra or BP; however, Ra was increased significantly by scratching the surface. Air-abrasion increased the Ra of resin composites significantly, irrespective of the application time. While RP provided a similarly smooth surface to the control in the case of microhybrid resin composite, BP increased the Ra significantly. The Ra for the control group of the nanofill-resin composite was initially high, which was further increased by air-abrasion. RP and BP re-established the initial Ra with deeper and shallower scratches after BP. Both the material and treatment type showed a large effect on Ra. Full article

Extensive biofilm formation on materials used in restorative dentistry is a common reason for their failure and the development of oral diseases like peri-implantitis or secondary caries. Therefore, novel materials and strategies that result in reduced biofouling capacities are urgently sought. Previous research suggests that surface structures in the range of bacterial cell sizes seem to be a promising approach to modulate bacterial adhesion and biofilm formation. Here we investigated bioadhesion within the oral cavity on a low surface energy material (perfluorpolyether) with different texture types (line-, hole-, pillar-like), feature sizes in a range from 0.7–4.5 µm and graded distances (0.7–130.5 µm). As a model system, the materials were fixed on splints and exposed to the oral cavity. We analyzed the enzymatic activity of amylase and lysozyme, pellicle formation, and bacterial colonization after 8 h intraoral exposure. In opposite to in vitro experiments, these in situ experiments revealed no clear signs of altered bacterial surface colonization regarding structure dimensions and texture types compared to unstructured substrates or natural enamel. In part, there seemed to be a decreasing trend of adherent cells with increasing periodicities and structure sizes, but this pattern was weak and irregular. Pellicle formation took place on all substrates in an unaltered manner. However, pellicle formation was most pronounced within recessed areas thereby partially masking the three-dimensional character of the surfaces. As the natural pellicle layer is obviously the most dominant prerequisite for bacterial adhesion, colonization in the oral environment cannot be easily controlled by structural means. Full article

Enamel erosion has become a common clinical finding that often impairs dental esthetics and function. In the current study, we aimed to implement the three-dimensional surface texture analysis (3DST) method to explore the protective effect of fluoride on surface texture prior to erosive conditions. For each of the 50 teeth used in this study, the polished buccal enamel surface was divided into three separate areas: the first area was untouched polished enamel, the two other surfaces were immersed in 0.3% citric acid for 30 s. One was treated with high-concentration (19,000 ppm) sodium fluoride (NaF) solution prior to acid attack, and the other had no treatment prior to acid exposure. Enamel surface texture and step height measurements were obtained using a high-resolution disk scanning confocal microscope, and SEM images were also acquired. Surfaces treated with fluoride showed fewer variations in 3-D surface texture parameters than the eroded surface compared to the control group (p = 0.001). This was in accordance with the SEM descriptive images. The findings indicate that pre-fluoridated enamel areas were less affected by the acid and showed similar features to the untouched enamel. Moreover, a protective effect of the fluoride treatment against irreversible enamel damage was noted as the surface loss (step-height) was significantly reduced (p = 0.03). The study showed that 3DST analysis is a valuable methodology for detecting and quantifying subtle differences between the surfaces. When exploring the combination of all surface texture parameters, it was revealed that the pre-fluoridated eroded enamel surfaces showed considerable similarity to the untouched enamel. Full article

The prevalence of white spots on teeth has increased in recent years. Regardless of their etiology, these lesions are characterized by a reduction in the enamel’s mineral phase, which is replaced by organic fluids. This causes an alteration of its chemical composition that affects its optical characteristics. Subsurface demineralization increases the pore volume of enamel, which in turn changes its optical refraction and results in the opaque color of white spot lesions. Here, we examined a non-invasive clinical technique used for eliminating these white spot lesions from enamel via two HCl-based products at different concentrations (6.6% and 15%). We used a digital method for evaluating the volumetric changes produced in dental enamel by the application of both products, one of which involved chemical erosion and the other, abrasive erosion. The mean volume of the enamel eliminated was −0.042 mm in 15% HCl, and −0.12 mm in 6.6% HCl. Thus, both 15% HCl and 6.6% HCl are capable of eroding the surface of the tooth enamel without reaching dentin. Moreover, 6.6% HCl produced a greater erosion of the dental enamel and left the surface a texture typical of an abrasive chemical-erosive product. The 15% HCl, however, produced an etching pattern typical of an erosive chemical with open enamel prisms prepared for subsequent adhesive procedures and restorers. Full article

The aim of the present study was to quantitatively assess changes in enamel roughness parameters before and after lingual bracket debonding. The lingual surface of 25 sound premolars extracted for orthodontic reasons was studied by 3D optical interferometric profilometry before and after debonding of lingual brackets following enamel finishing (with fine diamond) and polishing (with 12- and 20-fluted carbide burs). The roughness parameters tested were the amplitude parameters Sa and Sz, the hybrid parameter Sdr, and the functional parameters Sc and Sv. The parameter differences (after debonding-reference) were calculated, and statistical analysis was performed via a Wilcoxon signed-rank test. Statistically significantly higher values were observed in all the surface roughness parameters of enamel surfaces after finishing and polishing, with the mostly affected parameter being the Sdr. Under the conditions of the present study, the finishing and polishing instruments used after debonding of lingual noncustomized brackets created a surface texture rougher than the control in all the tested roughness parameters. Full article