Showing 1–50 of 53 results for author: Bhuiyan, A

Radiation Resilience of $β$-Ga$_2$O$_3$ Schottky Barrier Diodes Under High Dose Gamma Radiation

Authors: Saleh Ahmed Khan, Sudipto Saha, Uttam Singisetti, A F M Anhar Uddin Bhuiyan

Abstract: A systematic investigation of the electrical characteristics of $β$-Ga$_2$O$_3$ Schottky barrier diodes (SBDs) has been conducted under high dose $^{60}$Co gamma radiation up to 5 Mrad (Si). Initial exposure of the diodes to 1 Mrad (Si) resulted in a significant decrease in on-current by $\sim$78% and an increase in on-resistance from $\sim$3 m$Ω\cdot$cm$^2$ to $\sim$14 m$Ω\cdot$cm$^2$ compared to… ▽ More A systematic investigation of the electrical characteristics of $β$-Ga$_2$O$_3$ Schottky barrier diodes (SBDs) has been conducted under high dose $^{60}$Co gamma radiation up to 5 Mrad (Si). Initial exposure of the diodes to 1 Mrad (Si) resulted in a significant decrease in on-current by $\sim$78% and an increase in on-resistance from $\sim$3 m$Ω\cdot$cm$^2$ to $\sim$14 m$Ω\cdot$cm$^2$ compared to the pre-radiation condition, likely due to the generation of radiation-induced deep-level acceptor traps. However, upon exposure to higher doses of gamma radiation (3 and 5 Mrad (Si)) over a prolonged duration, the device performance partially recovered due to a radiation annealing effect. This effect is facilitated by secondary electrons generated through Compton scattering, which dissipate kinetic energy as heat throughout the lattice, thereby annealing the trapping centers responsible for device performance degradation. The capacitance-voltage (C-V) characterization revealed that the net carrier concentration in the $β$-Ga$_2$O$_3$ drift layer reduced from $\sim$3.19 $\times$ 10$^{16}$ cm$^{-3}$ to $\sim$3.05 $\times$ 10$^{16}$ cm$^{-3}$ after 5 Mrad (Si) irradiation. Temperature-dependent I-V characteristics showed that irradiation leads to a reduction in both forward and reverse current across all investigated temperatures ranging from 25 to 250$^\circ$C, accompanied by slight increases in on-resistance, ideality factors, and Schottky barrier heights. The reverse breakdown characteristics of the $β$-Ga$_2$O$_3$ SBDs showed a slight increase of the breakdown voltage after radiation. Overall, $β$-Ga$_2$O$_3$ Schottky diode exhibits high resilience to gamma irradiation, with performance degradation mitigated by radiation-induced self-recovery, highlighting its potential for radiation-hardened electronic applications in extreme environments. △ Less

Submitted 20 August, 2024; originally announced August 2024.

A Systematic Survey and Critical Review on Evaluating Large Language Models: Challenges, Limitations, and Recommendations

Authors: Md Tahmid Rahman Laskar, Sawsan Alqahtani, M Saiful Bari, Mizanur Rahman, Mohammad Abdullah Matin Khan, Haidar Khan, Israt Jahan, Amran Bhuiyan, Chee Wei Tan, Md Rizwan Parvez, Enamul Hoque, Shafiq Joty, Jimmy Huang

Abstract: Large Language Models (LLMs) have recently gained significant attention due to their remarkable capabilities in performing diverse tasks across various domains. However, a thorough evaluation of these models is crucial before deploying them in real-world applications to ensure they produce reliable performance. Despite the well-established importance of evaluating LLMs in the community, the comple… ▽ More Large Language Models (LLMs) have recently gained significant attention due to their remarkable capabilities in performing diverse tasks across various domains. However, a thorough evaluation of these models is crucial before deploying them in real-world applications to ensure they produce reliable performance. Despite the well-established importance of evaluating LLMs in the community, the complexity of the evaluation process has led to varied evaluation setups, causing inconsistencies in findings and interpretations. To address this, we systematically review the primary challenges and limitations causing these inconsistencies and unreliable evaluations in various steps of LLM evaluation. Based on our critical review, we present our perspectives and recommendations to ensure LLM evaluations are reproducible, reliable, and robust. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Forensic Iris Image-Based Post-Mortem Interval Estimation

Authors: Rasel Ahmed Bhuiyan, Adam Czajka

Abstract: Post-mortem iris recognition is an emerging application of iris-based human identification in a forensic setup. One factor that may be useful in conditioning iris recognition methods is the tissue decomposition level, which is correlated with the post-mortem interval (PMI), i.g., the number of hours that have elapsed since death. PMI, however, is not always available, and its precise estimation re… ▽ More Post-mortem iris recognition is an emerging application of iris-based human identification in a forensic setup. One factor that may be useful in conditioning iris recognition methods is the tissue decomposition level, which is correlated with the post-mortem interval (PMI), i.g., the number of hours that have elapsed since death. PMI, however, is not always available, and its precise estimation remains one of the core challenges in forensic examination. This paper presents the first known to us method of PMI estimation directly from forensic iris images. To assess the feasibility of the iris-based PMI estimation, convolutional neural networks-based models (VGG19, DenseNet121, ResNet152, and Inception_v3) were trained to predict the PMI from (a) near-infrared (NIR), (b) visible (RGB), and (c) multispectral forensic iris images. Models were evaluated following a 10-fold cross-validation in (S1) sample-disjoint, (S2) subject-disjoint, and (S3) cross-dataset scenarios. We found that using the multispectral data offers a spectacularly low mean absolute error (MAE) of approximately 3.5 hours in scenario (S1), a bit worse MAE of approximately 17.5 hours in scenario (S2), and an MAE of approximately 69.0 hours of in the scenario (S3). This suggests that if the environmental conditions are favorable (e.g., bodies are kept in low temperatures), forensic iris images provide features that are indicative of the PMI and can be automatically estimated. The source codes and model weights are made available with the paper. △ Less

Submitted 28 April, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Utilizing BERT for Information Retrieval: Survey, Applications, Resources, and Challenges

Authors: Jiajia Wang, Jimmy X. Huang, Xinhui Tu, Junmei Wang, Angela J. Huang, Md Tahmid Rahman Laskar, Amran Bhuiyan

Abstract: Recent years have witnessed a substantial increase in the use of deep learning to solve various natural language processing (NLP) problems. Early deep learning models were constrained by their sequential or unidirectional nature, such that they struggled to capture the contextual relationships across text inputs. The introduction of bidirectional encoder representations from transformers (BERT) le… ▽ More Recent years have witnessed a substantial increase in the use of deep learning to solve various natural language processing (NLP) problems. Early deep learning models were constrained by their sequential or unidirectional nature, such that they struggled to capture the contextual relationships across text inputs. The introduction of bidirectional encoder representations from transformers (BERT) leads to a robust encoder for the transformer model that can understand the broader context and deliver state-of-the-art performance across various NLP tasks. This has inspired researchers and practitioners to apply BERT to practical problems, such as information retrieval (IR). A survey that focuses on a comprehensive analysis of prevalent approaches that apply pretrained transformer encoders like BERT to IR can thus be useful for academia and the industry. In light of this, we revisit a variety of BERT-based methods in this survey, cover a wide range of techniques of IR, and group them into six high-level categories: (i) handling long documents, (ii) integrating semantic information, (iii) balancing effectiveness and efficiency, (iv) predicting the weights of terms, (v) query expansion, and (vi) document expansion. We also provide links to resources, including datasets and toolkits, for BERT-based IR systems. A key highlight of our survey is the comparison between BERT's encoder-based models and the latest generative Large Language Models (LLMs), such as ChatGPT, which rely on decoders. Despite the popularity of LLMs, we find that for specific tasks, finely tuned BERT encoders still outperform, and at a lower deployment cost. Finally, we summarize the comprehensive outcomes of the survey and suggest directions for future research in the area. △ Less

Submitted 18 February, 2024; originally announced March 2024.

Design of a W-band High-PAE Class A&AB Power Amplifier in 150nm GaAs Technology

Authors: Jun Yan Leea, Duo Wu, Xuanrui Guoc, Mohammad Mahdi Ariannejad, Mohammad Arif Sobhan Bhuiyan, Mahdi H. Miraz

Abstract: Nanometer scale power amplifiers (PA) at sub-THz suffer from severe parasitic effects that lead to experience limited maximum frequency and reduced power performance at the device transceiver front end. The integrated circuits researchers proposed different PA design architecture combinations at scaled down technologies to overcome these limitations. Although the designs meet the minimum requireme… ▽ More Nanometer scale power amplifiers (PA) at sub-THz suffer from severe parasitic effects that lead to experience limited maximum frequency and reduced power performance at the device transceiver front end. The integrated circuits researchers proposed different PA design architecture combinations at scaled down technologies to overcome these limitations. Although the designs meet the minimum requirements, the power added efficiency (PAE) of PA is still quite low. In this paper, a W-band single-ended common-source (CS) and cascode integrated 3-stage 2-way PA design is proposed. The design integrated different key design methodologies to mitigate the parasitic; such as combined Class AB and Class A stages for gain-boosting and efficiency enhancement, Wilkinson power combiner for higher output power, linearity, and bandwidth, and transmission line (TL)-based wide band matching network for better inter-stage matching and compact size. The proposed PA design is validated using UMS 150-nm GaAs pHEMT using advanced design system (ADS) simulator. The results show that the proposed PA achieved a gain of 20.1 dB, an output power of 17.2 dBm, a PAE of 33 % and a 21 GHz bandwidth at 90 GHz Sub-THz band. The PA layout consumes only 5.66 X 2.51 mm2 die space including pads. Our proposed PA design will boost the research on sub-THz integrated circuits research and will smooth the wide spread adoption of 6G in near future. △ Less

Submitted 10 February, 2024; originally announced February 2024.

Journal ref: Transactions on Electrical and Electronic Materials (TEEM), Electronic ISSN: 2092-7592, Print ISSN: 1229-7607, 10th February 2024, Available: https://link.springer.com/article/10.1007/s42341-024-00513-8

ECGformer: Leveraging transformer for ECG heartbeat arrhythmia classification

Authors: Taymaz Akan, Sait Alp, Mohammad Alfrad Nobel Bhuiyan

Abstract: An arrhythmia, also known as a dysrhythmia, refers to an irregular heartbeat. There are various types of arrhythmias that can originate from different areas of the heart, resulting in either a rapid, slow, or irregular heartbeat. An electrocardiogram (ECG) is a vital diagnostic tool used to detect heart irregularities and abnormalities, allowing experts to analyze the heart's electrical signals to… ▽ More An arrhythmia, also known as a dysrhythmia, refers to an irregular heartbeat. There are various types of arrhythmias that can originate from different areas of the heart, resulting in either a rapid, slow, or irregular heartbeat. An electrocardiogram (ECG) is a vital diagnostic tool used to detect heart irregularities and abnormalities, allowing experts to analyze the heart's electrical signals to identify intricate patterns and deviations from the norm. Over the past few decades, numerous studies have been conducted to develop automated methods for classifying heartbeats based on ECG data. In recent years, deep learning has demonstrated exceptional capabilities in tackling various medical challenges, particularly with transformers as a model architecture for sequence processing. By leveraging the transformers, we developed the ECGformer model for the classification of various arrhythmias present in electrocardiogram data. We assessed the suggested approach using the MIT-BIH and PTB datasets. ECG heartbeat arrhythmia classification results show that the proposed method is highly effective. △ Less

Submitted 6 January, 2024; originally announced January 2024.

Optimisation and Performance Computation of a Phase Frequency Detector Module for IoT Devices

Authors: Md. Shahriar Khan Hemel, Mamun Bin Ibne Reaz, Sawal Hamid Bin Md Ali, Mohammad Arif Sobhan Bhuiyan, Mahdi H. Miraz

Abstract: The Internet of Things (IoT) is pivotal in transforming the way we live and interact with our surroundings. To cope with the advancement in technologies, it is vital to acquire accuracy with the speed. A phase frequency detector (PFD) is a critical device to regulate and provide accurate frequency in IoT devices. Designing a PFD poses challenges in achieving precise phase detection, minimising dea… ▽ More The Internet of Things (IoT) is pivotal in transforming the way we live and interact with our surroundings. To cope with the advancement in technologies, it is vital to acquire accuracy with the speed. A phase frequency detector (PFD) is a critical device to regulate and provide accurate frequency in IoT devices. Designing a PFD poses challenges in achieving precise phase detection, minimising dead zones, optimising power consumption, and ensuring robust performance across various operational frequencies, necessitating complex engineering and innovative solutions. This study delves into optimising a PFD circuit, designed using 90 nm standard CMOS technology, aiming to achieve superior operational frequencies. An efficient and high-frequency PFD design is crafted and analysed using cadence virtuoso. The study focused on investigating the impact of optimising PFD design. With the optimised PFD, an operational frequency of 5 GHz has been achieved, along with a power consumption of only 29 μW. The dead zone of the PFD was only 25 ps. △ Less

Submitted 6 January, 2024; originally announced January 2024.

Journal ref: Annals of Emerging Technologies in Computing (AETiC), Print ISSN: 2516-0281, Online ISSN: 2516-029X, pp. 13-21, Vol. 8, No. 1, 1st January 2024, Available: http://aetic.theiaer.org/archive/v8/v8n1/p1.html

Forensic Iris Image Synthesis

Authors: Rasel Ahmed Bhuiyan, Adam Czajka

Abstract: Post-mortem iris recognition is an emerging application of iris-based human identification in a forensic setup, able to correctly identify deceased subjects even three weeks post-mortem. This technique thus is considered as an important component of future forensic toolkits. The current advancements in this field are seriously slowed down by exceptionally difficult data collection, which can happe… ▽ More Post-mortem iris recognition is an emerging application of iris-based human identification in a forensic setup, able to correctly identify deceased subjects even three weeks post-mortem. This technique thus is considered as an important component of future forensic toolkits. The current advancements in this field are seriously slowed down by exceptionally difficult data collection, which can happen in mortuary conditions, at crime scenes, or in ``body farm'' facilities. This paper makes a novel contribution to facilitate progress in post-mortem iris recognition by offering a conditional StyleGAN-based iris synthesis model, trained on the largest-available dataset of post-mortem iris samples acquired from more than 350 subjects, generating -- through appropriate exploration of StyleGAN latent space -- multiple within-class (same identity) and between-class (different new identities) post-mortem iris images, compliant with ISO/IEC 29794-6, and with decomposition deformations controlled by the requested PMI (post mortem interval). Besides an obvious application to enhance the existing, very sparse, post-mortem iris datasets to advance -- among others -- iris presentation attack endeavors, we anticipate it may be useful to generate samples that would expose professional forensic human examiners to never-seen-before deformations for various PMIs, increasing their training effectiveness. The source codes and model weights are made available with the paper. △ Less

Submitted 7 December, 2023; originally announced December 2023.

Effect of Triangular Pre-Cracks on the Mechanical Behavior of 2D MoTe$_2$: A Molecular Dynamics Study

Authors: Md. Jobayer Aziz, Md Akibul Islam, Md. Rezwanul Karim, Arafat Ahmed Bhuiyan

Abstract: Among two-dimensional (2D) materials, transition metal dichalcogenides (TMDs) stand out for their remarkable electronic, optical, and chemical properties. In addition to being variable bandgap semiconductor materials, the atomic thinness provides flexibility to TMDs. Therefore, understanding the physical properties of TMDs for applications in flexible and wearable devices is crucial. Despite the g… ▽ More Among two-dimensional (2D) materials, transition metal dichalcogenides (TMDs) stand out for their remarkable electronic, optical, and chemical properties. In addition to being variable bandgap semiconductor materials, the atomic thinness provides flexibility to TMDs. Therefore, understanding the physical properties of TMDs for applications in flexible and wearable devices is crucial. Despite the growing enthusiasm surrounding two-dimensional transition metal dichalcogenides (TMDs), our understanding of the mechanical characteristics of molybdenum ditelluride (MoTe$_2$) remains limited. The mechanical properties of MoTe$_2$ deteriorate in the presence of pre-existing cracks or vacancy defects, which are very common in grown TMDs. In this study, the fracture properties and crack propagation of monolayer molybdenum ditelluride (MoTe$_2$) sheets containing pre-existing triangular cracks with various vertex angles are investigated by performing molecular dynamics (MD) simulations of uniaxial and biaxial tensile loading. Due to pre-crack length, angle, and perimeter variations, monolayer MoTe$_2$ with pre-existing cracks underwent considerable changes in Young's modulus, tensile strength, fracture toughness, and fracture strain values. We have found that the pre-cracked MoTe$_2$ is more brittle than its pristine counterpart. Regulated alteration of pre-crack angle under constant simulation conditions improved the uniaxial mechanical properties. Similarly, regulated alteration of the perimeter of the pre-crack resulted in improved biaxial mechanical properties. This study contributes to the foundational knowledge for advanced design strategies involving strain engineering in MoTe$_2$ and other similar transition metal dichalcogenides. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Comments: Submitted to a peer-reviewed journal, 55 pages, 21 figures

A Systematic Study and Comprehensive Evaluation of ChatGPT on Benchmark Datasets

Authors: Md Tahmid Rahman Laskar, M Saiful Bari, Mizanur Rahman, Md Amran Hossen Bhuiyan, Shafiq Joty, Jimmy Xiangji Huang

Abstract: The development of large language models (LLMs) such as ChatGPT has brought a lot of attention recently. However, their evaluation in the benchmark academic datasets remains under-explored due to the difficulty of evaluating the generative outputs produced by this model against the ground truth. In this paper, we aim to present a thorough evaluation of ChatGPT's performance on diverse academic dat… ▽ More The development of large language models (LLMs) such as ChatGPT has brought a lot of attention recently. However, their evaluation in the benchmark academic datasets remains under-explored due to the difficulty of evaluating the generative outputs produced by this model against the ground truth. In this paper, we aim to present a thorough evaluation of ChatGPT's performance on diverse academic datasets, covering tasks like question-answering, text summarization, code generation, commonsense reasoning, mathematical problem-solving, machine translation, bias detection, and ethical considerations. Specifically, we evaluate ChatGPT across 140 tasks and analyze 255K responses it generates in these datasets. This makes our work the largest evaluation of ChatGPT in NLP benchmarks. In short, our study aims to validate the strengths and weaknesses of ChatGPT in various tasks and provide insights for future research using LLMs. We also report a new emergent ability to follow multi-query instructions that we mostly found in ChatGPT and other instruction-tuned models. Our extensive evaluation shows that even though ChatGPT is capable of performing a wide variety of tasks, and may obtain impressive performance in several benchmark datasets, it is still far from achieving the ability to reliably solve many challenging tasks. By providing a thorough assessment of ChatGPT's performance across diverse NLP tasks, this paper sets the stage for a targeted deployment of ChatGPT-like LLMs in real-world applications. △ Less

Submitted 5 July, 2023; v1 submitted 29 May, 2023; originally announced May 2023.

Comments: Accepted by ACL 2023 Findings. The first three authors contributed equally

Sub-100 nm β-Ga2O3 MOSFET with 55 GHz fMAX and >100 V breakdown

Authors: Chinmoy Nath Saha, Abhishek Vaidya, A F M Anhar Uddin Bhuiyan, Lingyu Meng, Hongping Zhao, Uttam Singisetti

Abstract: This letter reports a highly scaled 90 nm gate length beta-Ga2O3 T-gate MOSFET with no current collapse and record power gain cut off frequency (fMAX). The epitaxial stack of 60 nm thin channel MOSFET was grown by Molecular Beam Epitaxy (MBE) and highly doped (n++) contact regrowth was carried out by Metal Organic Chemical Vapour Deposition (MOCVD) in the source/drain region. Maximum on current (I… ▽ More This letter reports a highly scaled 90 nm gate length beta-Ga2O3 T-gate MOSFET with no current collapse and record power gain cut off frequency (fMAX). The epitaxial stack of 60 nm thin channel MOSFET was grown by Molecular Beam Epitaxy (MBE) and highly doped (n++) contact regrowth was carried out by Metal Organic Chemical Vapour Deposition (MOCVD) in the source/drain region. Maximum on current (IDS, MAX) of 160 mA/mm and transconductance (gm) around 36 mS/mm was measured at VDS= 10 V for LSD= 1.5 micrometer channel length. Transconductance is limited by higher channel sheet resistance (Rsheet). We observed no current collapse for both drain and gate lag measurement even at higher VDG,Q quiescent bias points. This is the first report of Ga2O3 FET showing no current collapse without any external passivation. Breakdown voltage around 125 V was reported for LGD= 1.2 micrometer. We extracted 27 GHz current gain cut off frequency (fT) and 55 GHz fMAX for 20 V drain bias. fMAX value mentioned here is the highest for Ga2O3 and the first demonstration of 55 GHz operation. fT. VBR product of 3.375 THz.V has been calculated which is comparable with state-of-art GaN HEMT. This letter suggests that Ga2O3 can be a suitable candidate for X-band application. △ Less

Submitted 14 November, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Electrical Characteristics of in situ Mg-doped beta-Ga2O3 Current-Blocking Layer for Vertical Devices

Authors: Sudipto Saha, Lingyu Meng, A F M Anhar Uddin Bhuiyan, Ankit Sharma, Chinmoy Nath Saha, Hongping Zhao, Uttam Singisetti

Abstract: The lack of p-type doping has impeded the development of vertical gallium oxide (Ga2O3) devices. Current blocking layers (CBL) using implanted deep acceptors has been used to demonstrate vertical devices. This paper presents the first demonstration of in situ Mg-doped beta-Ga2O3 CBLs grown using metalorganic chemical vapor deposition. Device structures were designed with in-situ Mg doped layers wi… ▽ More The lack of p-type doping has impeded the development of vertical gallium oxide (Ga2O3) devices. Current blocking layers (CBL) using implanted deep acceptors has been used to demonstrate vertical devices. This paper presents the first demonstration of in situ Mg-doped beta-Ga2O3 CBLs grown using metalorganic chemical vapor deposition. Device structures were designed with in-situ Mg doped layers with varied targeted Mg doping concentrations, which were calibrated by quantitative secondary ion mass spectroscopy (SIMS). The effectiveness of the CBL is characterized using temperature dependent current-voltage measurements using n-Mg-doped-n structures, providing crucial insight into the underlying mechanisms. To further validate the experimental results, a TCAD simulation is performed and the electrically active effective doping is found to be dependent on the Mg-doping density, offering a new perspective on the optimization of CBL performance. Breakdown measurements show a 3.4 MV/cm field strength. This study represents a significant step forward in the development of Ga2O3-based devices and paves the way for future advancements in this exciting field. △ Less

Submitted 12 April, 2023; originally announced April 2023.

Metalorganic Chemical Vapor Deposition of \b{eta}-(AlxGa1-x)2O3 thin films on (001) \b{eta}-Ga2O3 substrates

Authors: A. F. M. Anhar Uddin Bhuiyan, Lingyu Meng, Hsien-Lien Huang, Jith Sarker, Chris Chae, Baishakhi Mazumder, Jinwoo Hwang, Hongping Zhao

Abstract: Phase pure \b{eta}-(AlxGa1-x)2O3 thin films are grown on (001) oriented \b{eta}-Ga2O3 substrates via metalorganic chemical vapor deposition (MOCVD). By systematically tuning the precursor molar flow rates, the epitaxial growth of coherently strained \b{eta}-(AlxGa1-x)2O3 films are demonstrated with up to 25% Al compositions as evaluated by high resolution x-ray diffraction (XRD). The asymmetrical… ▽ More Phase pure \b{eta}-(AlxGa1-x)2O3 thin films are grown on (001) oriented \b{eta}-Ga2O3 substrates via metalorganic chemical vapor deposition (MOCVD). By systematically tuning the precursor molar flow rates, the epitaxial growth of coherently strained \b{eta}-(AlxGa1-x)2O3 films are demonstrated with up to 25% Al compositions as evaluated by high resolution x-ray diffraction (XRD). The asymmetrical reciprocal space mapping confirms the growth of coherent \b{eta}-(AlxGa1-x)2O3 films (x < 25%) on (001) \b{eta}-Ga2O3 substrates. While the films show smooth surface morphologies, the alloy inhomogeneity with local segregation of Al along (-201) plane is observed from atomic resolution STEM imaging, resulting in wavy and inhomogeneous interfaces in \b{eta}-(AlxGa1-x)2O3/\b{eta}-Ga2O3 superlattice structure. Room temperature Raman spectra of \b{eta}-(AlxGa1-x)2O3 films show similar characteristics peaks as (001) \b{eta}-Ga2O3 substrate without obvious Raman shifts for films with different Al compositions. Atom probe tomography (APT) was used to investigate the atomic level structural chemistry with increasing Al content in the \b{eta}-(AlxGa1-x)2O3 films. A monotonous increase in chemical heterogeneity is observed from the in-plane Al/Ga distributions which was further confirmed via statistical frequency distribution analysis (FDA). Although the films exhibit alloy fluctuations, n-type doping with good electrical properties are demonstrated for films with various Al compositions. The determined valence and conduction band offsets at \b{eta}-(AlxGa1-x)2O3/\b{eta}-Ga2O3 heterojunctions using x-ray photoelectron spectroscopy (XPS) reveal the formation of type-II (staggered) band alignment. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Beta-Ga2O3 MOSFETs with near 50 GHz fMAX and 5.4 MV/cm average breakdown field

Authors: Chinmoy Nath Saha, Abhishek Vaidya, A F M Anhar Uddin Bhuiyan, Lingyu Meng, Hongping Zhao, Uttam Singisetti

Abstract: This letter reports high-performance $\mathrmβ Ga2O3 thin channel MOSFETs with T-gate and degenerately doped source/drain contacts regrown by MOCVD. Gate length scaling (LG= 160-200 nm) leads to a peak drain current (ID,MAX) of 285 mA/mm and peak trans-conductance (gm) of 52 mS/mm at 10 V drain bias with 23.5 Ohm mm on resistance (Ron). A low metal/n+ contact resistance of 0.078 Ohm mm was extract… ▽ More This letter reports high-performance $\mathrmβ Ga2O3 thin channel MOSFETs with T-gate and degenerately doped source/drain contacts regrown by MOCVD. Gate length scaling (LG= 160-200 nm) leads to a peak drain current (ID,MAX) of 285 mA/mm and peak trans-conductance (gm) of 52 mS/mm at 10 V drain bias with 23.5 Ohm mm on resistance (Ron). A low metal/n+ contact resistance of 0.078 Ohm mm was extracted from TLM measurement. Ron is dominated by interface resistance between channel and regrown layer. A gate-to-drain breakdown voltage of 192 V is measured for LGD = 355 nm resulting in average breakdown field (E_AVG) of 5.4 MV/cm. This E_AVG is the highest reported among all sub-micron gate length lateral FETs. RF measurements on 200 nm Silicon Nitride (Si3N4) passivated device shows a current gain cut off frequency (f_T) of 11 GHz and record power gain cut off frequency (f_MAX) of 48 GHz. The f_T.V_Br product is 2.11 THz.V for 192 V breakdown voltage. The switching figure of merit exceeds that of silicon and is comparable to mature wide-band gap devices. △ Less

Submitted 2 November, 2022; originally announced November 2022.

TiN-GST-TiN All-Optical Reflection Modulator for 2 $μ$m Waveband Reaching 85% Efficiency

Authors: Md Asif Hossain Bhuiyan, Shamima Akter Mitu, Sajid Muhaimin Choudhury

Abstract: In this study, we present an all-optical reflection modulator for 2$μ$m communication band exploiting a nano-gear-array metasurface and a phase-change-material Ge$_2$Sb$_2$Te$_5$ (GST). The reflectance of the structure can be manipulated by altering the phase of GST by employing optical stimuli. The paper shows details on the optical and opto-thermal modeling techniques of GST. Numerical investiga… ▽ More In this study, we present an all-optical reflection modulator for 2$μ$m communication band exploiting a nano-gear-array metasurface and a phase-change-material Ge$_2$Sb$_2$Te$_5$ (GST). The reflectance of the structure can be manipulated by altering the phase of GST by employing optical stimuli. The paper shows details on the optical and opto-thermal modeling techniques of GST. Numerical investigation reveals that the metastructure exhibits a conspicuous changeover from $\sim$ 99% absorption to very poor interaction with the operating light depending on the switching states of the GST, ending up with 85\% modulation depth and only 0.58 dB insertion loss. Due to noticeable differences in optical responses, we can demonstrate a high extinction ratio of 28 dB and a commendable FOM of 49, so far the best modulation performance in this wavelength window. In addition, real-time tracking of the reflectance during phase transition manifests high-speed switching expending low energy per cycle, on the order of sub-nJ. Hence, given its overall performance, the device will be a paradigm for the optical modulators for upcoming 2 $μ$m communication technology. △ Less

Submitted 30 October, 2022; originally announced October 2022.

Journal ref: Applied Optics Vol 61(31), pp9262-9270 (2022)

In-situ MOCVD Growth and Band Offsets of Al$_2$O$_3$ Dielectric on $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ thin films

Authors: A F M Anhar Uddin Bhuiyan, Lingyu Meng, Hsien-Lien Huang, Jinwoo Hwang, Hongping Zhao

Abstract: The in-situ metalorganic chemical vapor deposition (MOCVD) growth of Al$_2$O$_3$ dielectrics on $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films is investigated as a function of crystal orientations and Al compositions of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The interface and film qualities of Al$_2$O$_3$ dielectrics are evaluated by high resolution X-ray diffraction (HR-XRD) and scanni… ▽ More The in-situ metalorganic chemical vapor deposition (MOCVD) growth of Al$_2$O$_3$ dielectrics on $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films is investigated as a function of crystal orientations and Al compositions of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The interface and film qualities of Al$_2$O$_3$ dielectrics are evaluated by high resolution X-ray diffraction (HR-XRD) and scanning transmission electron microscopy (HR-STEM) imaging, which indicate the growth of high quality amorphous Al$_2$O$_3$ dielectrics with abrupt interfaces on (010), (100) and (-201) oriented $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The surface stoichiometries of Al$_2$O$_3$ deposited on all orientations of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ are found to be well maintained with a bandgap energy of 6.91 eV as evaluated by high resolution x-ray photoelectron spectroscopy, which is consistent with the atomic layer deposited (ALD) Al$_2$O$_3$ dielectrics. The evolution of band offsets at both in-situ MOCVD and ex-situ ALD deposited Al$_2$O$_3$/$β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ are determined as a function of Al composition, indicating the influence of the deposition method, orientation, and Al composition of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films on resulting band alignments. Type II band alignments are determined at the MOCVD grown Al$_2$O$_3$/$β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ interfaces for (010) and (100) orientations, whereas type I band alignments with relatively lower conduction band offsets are observed along (-201) orientation. Results from this work revealed that the in-situ MOCVD deposited high quality Al$_2$O$_3$ dielectrics with sharp interfaces can be considered as a viable alternative of commonly used ex-situ deposited (ALD) Al$_2$O$_3$ for developing high performance $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ based devices. △ Less

Submitted 12 October, 2022; v1 submitted 26 July, 2022; originally announced July 2022.

MOCVD growth and band offsets of \k{appa}-phase Ga2O3 on sapphire, GaN, AlN and YSZ substrates

Authors: A F M Anhar Uddin Bhuiyan, Zixuan Feng, Hsien-Lien Huang, Lingyu Meng, Jinwoo Hwang, Hongping Zhao

Abstract: Epitaxial growth of \k{appa}-phase Ga2O3 thin films are investigated on c-plane sapphire, GaN- and AlNon-sapphire, and (100) oriented yttria stabilized zirconia (YSZ) substrates via metalorganic chemical vapor deposition (MOCVD). The structural and surface morphological properties are investigated by comprehensive material characterization. Phase pure \k{appa}-Ga2O3 films are successfully grown on… ▽ More Epitaxial growth of \k{appa}-phase Ga2O3 thin films are investigated on c-plane sapphire, GaN- and AlNon-sapphire, and (100) oriented yttria stabilized zirconia (YSZ) substrates via metalorganic chemical vapor deposition (MOCVD). The structural and surface morphological properties are investigated by comprehensive material characterization. Phase pure \k{appa}-Ga2O3 films are successfully grown on GaN-, AlN-on sapphire, and YSZ substrates through a systematical tuning of the growth parameters including the precursor molar flow rates, chamber pressure and growth temperature, whereas the growth on c-sapphire substrates leads to a mixture of \b{eta}- and \k{appa}polymorphs of Ga2O3 under the investigated growth conditions. The influence of the crystalline structure, surface morphology and roughness of \k{appa}-Ga2O3 films grown on different substrates are investigated as a function of precursor flow rate. High resolution scanning transmission electron microscopy (HR-STEM) imaging of \k{appa}-Ga2O3 films reveals abrupt interfaces between the epitaxial film and the sapphire, GaN and YSZ substrates. The growth of single crystal orthorhombic \k{appa}Ga2O3 films is confirmed by analyzing the STEM nano-diffraction pattern. The chemical composition, surface stoichiometry, and the bandgap energies of \k{appa}-Ga2O3 thin films grown on different substrates are studied by high resolution x-ray photoelectron spectroscopy (XPS) measurements. The type-II (staggered) band alignments at three interfaces between \k{appa}-Ga2O3 and c-sapphire, AlN, and YSZ substrates are determined by XPS, with the exception of \k{appa}-Ga2O3/GaN interface, which shows type I (straddling) band alignment. △ Less

Submitted 12 October, 2022; v1 submitted 25 July, 2022; originally announced July 2022.

Evaluating Performance of Machine Learning Models for Diabetic Sensorimotor Polyneuropathy Severity Classification using Biomechanical Signals during Gait

Authors: Fahmida Haque, Mamun Bin Ibne Reaz, Muhammad Enamul Hoque Chowdhury, Serkan Kiranyaz, Mohamed Abdelmoniem, Emadeddin Hussein, Mohammed Shaat, Sawal Hamid Md Ali, Ahmad Ashrif A Bakar, Geetika Srivastava, Mohammad Arif Sobhan Bhuiyan, Mohd Hadri Hafiz Mokhtar, Edi Kurniawan

Abstract: Diabetic sensorimotor polyneuropathy (DSPN) is one of the prevalent forms of neuropathy affected by diabetic patients that involves alterations in biomechanical changes in human gait. In literature, for the last 50 years, researchers are trying to observe the biomechanical changes due to DSPN by studying muscle electromyography (EMG), and ground reaction forces (GRF). However, the literature is co… ▽ More Diabetic sensorimotor polyneuropathy (DSPN) is one of the prevalent forms of neuropathy affected by diabetic patients that involves alterations in biomechanical changes in human gait. In literature, for the last 50 years, researchers are trying to observe the biomechanical changes due to DSPN by studying muscle electromyography (EMG), and ground reaction forces (GRF). However, the literature is contradictory. In such a scenario, we are proposing to use Machine learning techniques to identify DSPN patients by using EMG, and GRF data. We have collected a dataset consists of three lower limb muscles EMG (tibialis anterior (TA), vastus lateralis (VL), gastrocnemius medialis (GM) and 3-dimensional GRF components (GRFx, GRFy, and GRFz). Raw EMG and GRF signals were preprocessed, and a newly proposed feature extraction technique scheme from literature was applied to extract the best features from the signals. The extracted feature list was ranked using Relief feature ranking techniques, and highly correlated features were removed. We have trained different ML models to find out the best-performing model and optimized that model. We trained the optimized ML models for different combinations of muscles and GRF components features, and the performance matrix was evaluated. This study has found ensemble classifier model was performing in identifying DSPN Severity, and we optimized it before training. For EMG analysis, we have found the best accuracy of 92.89% using the Top 14 features for features from GL, VL and TA muscles combined. In the GRF analysis, the model showed 94.78% accuracy by using the Top 15 features for the feature combinations extracted from GRFx, GRFy and GRFz signals. The performance of ML-based DSPN severity classification models, improved significantly, indicating their reliability in DSPN severity classification, for biomechanical data. △ Less

Submitted 21 May, 2022; originally announced May 2022.

Comments: 17 pages, 15 figures, 8 tables

Myoelectric Pattern Recognition Performance Enhancement Using Nonlinear Features

Authors: Md. Johirul Islam, Shamim Ahmad, Fahmida Haque, Mamun Bin Ibne Reaz, Mohammad A. S. Bhuiyan, Md. Rezaul Islam

Abstract: The multichannel electrode array used for electromyogram (EMG) pattern recognition provides good performance, but it has a high cost, is computationally expensive, and is inconvenient to wear. Therefore, researchers try to use as few channels as possible while maintaining improved pattern recognition performance. However, minimizing the number of channels affects the performance due to the least s… ▽ More The multichannel electrode array used for electromyogram (EMG) pattern recognition provides good performance, but it has a high cost, is computationally expensive, and is inconvenient to wear. Therefore, researchers try to use as few channels as possible while maintaining improved pattern recognition performance. However, minimizing the number of channels affects the performance due to the least separable margin among the movements possessing weak signal strengths. To meet these challenges, two time-domain features based on nonlinear scaling, the log of the mean absolute value (LMAV) and the nonlinear scaled value (NSV), are proposed. In this study, we validate the proposed features on two datasets, existing four feature extraction methods, variable window size and various signal to noise ratios (SNR). In addition, we also propose a feature extraction method where the LMAV and NSV are grouped with the existing 11 time-domain features. The proposed feature extraction method enhances accuracy, sensitivity, specificity, precision, and F1 score by 1.00%, 5.01%, 0.55%, 4.71%, and 5.06% for dataset 1, and 1.18%, 5.90%, 0.66%, 5.63%, and 6.04% for dataset 2, respectively. Therefore, the experimental results strongly suggest the proposed feature extraction method, for taking a step forward with regard to improved myoelectric pattern recognition performance. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Comments: 20 pages, 12 figures, 2 tables

The bound-state solutions of the one-dimensional pseudoharmonic oscillator

Authors: Rufus Boyack, Asadullah Bhuiyan, Aneca Su, Frank Marsiglio

Abstract: We study the bound states of a quantum mechanical system consisting of a simple harmonic oscillator with an inverse square interaction, whose interaction strength is governed by a constant $α$. The singular form of this potential has doubly-degenerate bound states for $-1/4\leqα<0$ and $α>0$; since the potential is symmetric, these consist of even and odd-parity states. In addition we consider a r… ▽ More We study the bound states of a quantum mechanical system consisting of a simple harmonic oscillator with an inverse square interaction, whose interaction strength is governed by a constant $α$. The singular form of this potential has doubly-degenerate bound states for $-1/4\leqα<0$ and $α>0$; since the potential is symmetric, these consist of even and odd-parity states. In addition we consider a regularized form of this potential with a constant cutoff near the origin. For this regularized potential, there are also even and odd-parity eigenfunctions for $α\geq-1/4$. For attractive potentials within the range $-1/4\leqα<0$, there is an even-parity ground state with increasingly negative energy and a probability density that approaches a Dirac delta function as the cutoff parameter becomes zero. These properties are analogous to a similar ground state present in the regularized one-dimensional hydrogen atom. We solve this problem both analytically and numerically, and show how the regularized excited states approach their unregularized counterparts. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Journal ref: J. Math. Chem. 61, 242-276 (2023)

Managing Innovation in Technical Education: Revisiting the Developmental Strategies of Politeknik Brunei

Authors: Bashir Ahmed Bhuiyan, Mohammad Shahansha Molla, Masud Alam

Abstract: The present study aims at exploring the strategies for managing innovation in technical education by using blended learning philosophy and practices with special reference to Politeknik Brunei. Based on literature review and desk research, the study found out salient characteristics, explored constraining factors, elicited strategies of Politeknik Brunei, and suggested some options and a framework… ▽ More The present study aims at exploring the strategies for managing innovation in technical education by using blended learning philosophy and practices with special reference to Politeknik Brunei. Based on literature review and desk research, the study found out salient characteristics, explored constraining factors, elicited strategies of Politeknik Brunei, and suggested some options and a framework for innovations management and development of effective blended teaching and learning. The limiting factors identified are the unwillingness of the top-level management, lack of structural support, dearth of readiness of the stakeholders, the gap between teacher's expectations and changed students characteristics, and blended teaching myopia on the way of effective application of blended learning strategies. Notable suggestions for strategic development are developing wide-angle vision and self-renewal processes, analyzing the environment for needs determination. Clarity of purpose and tasks, technological adaptability, data-driven decision making, prompt feedback, flipped classroom, and development of learning clusters are other dimensions that may go a long way toward innovating teaching-learning and the overall development of an academic institution. Finally, the study suggested important guidelines for applying the strategies and proposed framework for quality blended learning and managing innovations in technical education. △ Less

Submitted 4 November, 2021; originally announced November 2021.

Comments: 14

Journal ref: Annals of Contemporary Developments in Management & HR (ACDMHR),pp. 44-57, Vol. 3, No. 4, 1st November 2021

Design, Simulation and Feasibility Analysis of Bifacial Solar PV System in Marine Drive Road, Cox's Bazar

Authors: Abdullah Al Mehadi, Mirza Muntasir Nishat, Fahim Faisal, Ahmed Raza Hasan Bhuiyan, Mohyeu Hussain, Md Ashraful Hoque

Abstract: This paper proposes a design and simulation based investigative analysis of a vertically mounted bifacial solar photovoltaic model in Marine Drive Road, Cox's Bazar. Cox's bazar is a famous tourist destination which seems to be a flexible site for implementing such energy harvesting system without affecting the nearby eco-system and solves the existing land shortage problem. Moreover, the infrastr… ▽ More This paper proposes a design and simulation based investigative analysis of a vertically mounted bifacial solar photovoltaic model in Marine Drive Road, Cox's Bazar. Cox's bazar is a famous tourist destination which seems to be a flexible site for implementing such energy harvesting system without affecting the nearby eco-system and solves the existing land shortage problem. Moreover, the infrastructure will provide insulation to noise related problem faced by nearby residents, arising from traffic noises. A model road of 200 meters is reconnoitered for energy harvesting by solar power using three prominent software namely PVSOL, PVsyst, and SAM where a promising mean annual yield of 70492.9 kWh is obtained, and the bifacial gain is calculated to be 12.26%. In addition, a deviation analysis is performed among each of the software and it is found that PVSOL and PVsyst have shown less deviation. Furthermore, a comprehensive financial analysis shows total installation cost to be 84759.74$. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Comments: Accepted and presented in 2021 International Conference on Science & Contemporary Technologies (ICSCT). Will be published in IEEE Xplore

T Grating on Nano-Cavity Array based Refractive Index Sensor

Authors: Yasir Fatha Abed, Md Asif Hossain Bhuiyan, Sajid Muhaimin Choudhury

Abstract: We report a refractive index sensor comprising of unique T grating on top of periodic nano-cavities. The sensor has two resonant modes sensitive to different regions of the structure with low inter-region interference, hence allows simultaneous detection of two different analytes or more accurate detection of a single analyte. The sensor also provides a self-referencing feature for a broad range o… ▽ More We report a refractive index sensor comprising of unique T grating on top of periodic nano-cavities. The sensor has two resonant modes sensitive to different regions of the structure with low inter-region interference, hence allows simultaneous detection of two different analytes or more accurate detection of a single analyte. The sensor also provides a self-referencing feature for a broad range of refractive index, from 1.3 to 1.5. Using the FDTD method, the sensitivities of 801.7 nm/RIU and 1386.8 nm/RIU have been recorded for the two modes respectively. The versatility of the structure makes the sensor a prominent candidate for biochemical and other sensing applications. △ Less

Submitted 2 August, 2021; v1 submitted 20 May, 2021; originally announced May 2021.

Comments: 8 pages, 7 figures

Journal ref: J. Opt. Soc. Am. B 38(9) (2021)

FedMood: Federated Learning on Mobile Health Data for Mood Detection

Authors: Xiaohang Xu, Hao Peng, Lichao Sun, Md Zakirul Alam Bhuiyan, Lianzhong Liu, Lifang He

Abstract: Depression is one of the most common mental illness problems, and the symptoms shown by patients are not consistent, making it difficult to diagnose in the process of clinical practice and pathological research. Although researchers hope that artificial intelligence can contribute to the diagnosis and treatment of depression, the traditional centralized machine learning needs to aggregate patient… ▽ More Depression is one of the most common mental illness problems, and the symptoms shown by patients are not consistent, making it difficult to diagnose in the process of clinical practice and pathological research. Although researchers hope that artificial intelligence can contribute to the diagnosis and treatment of depression, the traditional centralized machine learning needs to aggregate patient data, and the data privacy of patients with mental illness needs to be strictly confidential, which hinders machine learning algorithms clinical application. To solve the problem of privacy of the medical history of patients with depression, we implement federated learning to analyze and diagnose depression. First, we propose a general multi-view federated learning framework using multi-source data, which can extend any traditional machine learning model to support federated learning across different institutions or parties. Secondly, we adopt late fusion methods to solve the problem of inconsistent time series of multi-view data. Finally, we compare the federated framework with other cooperative learning frameworks in performance and discuss the related results. △ Less

Submitted 20 May, 2021; v1 submitted 6 February, 2021; originally announced February 2021.

Large-Size Free-Standing Single-crystal b-Ga2O3 Membranes Fabricated by Hydrogen Implantation and Lift-Off

Authors: Yixiong Zheng, Zixuan Feng, A F M Anhar Uddin Bhuiyan, Lingyu Meng, Samyak Dhole, Quanxi Jia, Hongping Zhao, Jung-Hun Seo

Abstract: In this paper, we have demonstrated the large-size free-standing single-crystal b-Ga2O3 NMs fabricated by the hydrogen implantation and lift-off process directly from MOCVD grown b-Ga2O3 epifilms on native substrates. The optimum implantation conditions were simulated with a Monte-Carlo simulation to obtain the high hydrogen concentration with a narrow ion distribution at the desired depth. Two as… ▽ More In this paper, we have demonstrated the large-size free-standing single-crystal b-Ga2O3 NMs fabricated by the hydrogen implantation and lift-off process directly from MOCVD grown b-Ga2O3 epifilms on native substrates. The optimum implantation conditions were simulated with a Monte-Carlo simulation to obtain the high hydrogen concentration with a narrow ion distribution at the desired depth. Two as grown b-Ga2O3 samples with different orientation ([100] and [001]) were used and successfully create 1.2 um thick b-Ga2O3 NMs without any physical damages. These b-Ga2O3 NMs were then transfer-printed onto rigid and flexible substrates such as SiC substrate and polyimide substrate. Various material characterizations were performed to investigate the crystal quality, surface morphology, optical property, mechanical property, and bandgap before and after the lift-off and revealed that good material quality is maintained. This result offers several benefits in that the thickness, doping, and size of b-Ga2O3 NMs can be fully controlled. Moreover, more advanced b-Ga2O3-based NM structures such as (AlxGa1-x)2O3/Ga2O3 heterostructure NMs can be directly created from their bulk epitaxy substrates thus this result provides a viable route for the realization of high performance b-Ga2O3 NM-based electronics and optoelectronics that can be built on various substrates and platforms. △ Less

Submitted 11 February, 2021; originally announced February 2021.

AR-based Modern Healthcare: A Review

Authors: Jinat Ara, Hanif Bhuiyan, Yeasin Arafat Bhuiyan, Salma Begum Bhyan, Muhammad Ismail Bhuiyan

Abstract: The recent advances of Augmented Reality (AR) in healthcare have shown that technology is a significant part of the current healthcare system. In recent days, augmented reality has proposed numerous smart applications in healthcare domain including wearable access, telemedicine, remote surgery, diagnosis of medical reports, emergency medicine, etc. The aim of the developed augmented healthcare app… ▽ More The recent advances of Augmented Reality (AR) in healthcare have shown that technology is a significant part of the current healthcare system. In recent days, augmented reality has proposed numerous smart applications in healthcare domain including wearable access, telemedicine, remote surgery, diagnosis of medical reports, emergency medicine, etc. The aim of the developed augmented healthcare application is to improve patient care, increase efficiency, and decrease costs. This article puts on an effort to review the advances in AR-based healthcare technologies and goes to peek into the strategies that are being taken to further this branch of technology. This article explores the important services of augmented-based healthcare solutions and throws light on recently invented ones as well as their respective platforms. It also addresses concurrent concerns and their relevant future challenges. In addition, this paper analyzes distinct AR security and privacy including security requirements and attack terminologies. Furthermore, this paper proposes a security model to minimize security risks. Augmented reality advantages in healthcare, especially for operating surgery, emergency diagnosis, and medical training is being demonstrated here thorough proper analysis. To say the least, the article illustrates a complete overview of augmented reality technology in the modern healthcare sector by demonstrating its impacts, advancements, current vulnerabilities; future challenges, and concludes with recommendations to a new direction for further research. △ Less

Submitted 15 January, 2021; originally announced January 2021.

Comments: 14 pages, 7 figures, and 2 tables

ACM Class: A.1; H.4; I.2; J.3

Modelling Attacks in Blockchain Systems using Petri Nets

Authors: Md. Atik Shahriar, Faisal Haque Bappy, A. K. M. Fakhrul Hossain, Dayamoy Datta Saikat, Md Sadek Ferdous, Mohammad Jabed M. Chowdhury, Md Zakirul Alam Bhuiyan

Abstract: Blockchain technology has evolved through many changes and modifications, such as smart-contracts since its inception in 2008. The popularity of a blockchain system is due to the fact that it offers a significant security advantage over other traditional systems. However, there have been many attacks in various blockchain systems, exploiting different vulnerabilities and bugs, which caused a signi… ▽ More Blockchain technology has evolved through many changes and modifications, such as smart-contracts since its inception in 2008. The popularity of a blockchain system is due to the fact that it offers a significant security advantage over other traditional systems. However, there have been many attacks in various blockchain systems, exploiting different vulnerabilities and bugs, which caused a significant financial loss. Therefore, it is essential to understand how these attacks in blockchain occur, which vulnerabilities they exploit, and what threats they expose. Another concerning issue in this domain is the recent advancement in the quantum computing field, which imposes a significant threat to the security aspects of many existing secure systems, including blockchain, as they would invalidate many widely-used cryptographic algorithms. Thus, it is important to examine how quantum computing will affect these or other new attacks in the future. In this paper, we explore different vulnerabilities in current blockchain systems and analyse the threats that various theoretical and practical attacks in the blockchain expose. We then model those attacks using Petri nets concerning current systems and future quantum computers. △ Less

Submitted 14 November, 2020; originally announced November 2020.

Comments: Accepted for publication at the 19th IEEE International Conference on Trust, Security and Privacy in Computing and Communications (IEEE TrustCom 2020)

Subgrid-scale energy transfer and associated coherent structures in turbulent flow over a forest-like canopy

Authors: Md. Abdus Samad Bhuiyan, Jahrul M Alam

Abstract: Large eddy simulation allows to incorporate the important driving physics of turbulent flow through forest- or vegetation-like canopies. In this paper we investigate the effects of vortex stretching and coherent structures on the subgrid-scale (SGS) turbulence kinetic energy (TKE). We present three simulations (SGS-d/s/w) of turbulence-canopy interactions. SGS-d assumes a local, dynamic balance of… ▽ More Large eddy simulation allows to incorporate the important driving physics of turbulent flow through forest- or vegetation-like canopies. In this paper we investigate the effects of vortex stretching and coherent structures on the subgrid-scale (SGS) turbulence kinetic energy (TKE). We present three simulations (SGS-d/s/w) of turbulence-canopy interactions. SGS-d assumes a local, dynamic balance of SGS production with SGS dissipation. SGS-s averages the SGS contributions of coherent structures over Lagrangian pathlines. SGS-w assumes that an average cascade of TKE from large- to small-scales occurs through the process of vortex stretching. We compare the consequences of considering a forest of the same morphology as immersed solids or an immersed canopy. Our results show clear differences in the characteristics of flow and turbulence, while both the cases exhibit canopy mixing layers. The results also show that the consideration of vortex stretching resolves about $18$% more TKE with respect to classical Deardorff's TKE model. These observations indicate that the aerodynamic response of the forest canopy is linked to the morphology of the forest cover. Sweep- and ejection-events of the spatially intermittent coherent structures in forests as well as their role in transporting momentum, energy, and scalars are discussed. △ Less

Submitted 3 October, 2020; originally announced October 2020.

Comments: 16 pages, 6 figures

Edge Localized Schrödinger Cat States in Finite Lattices via Periodic Driving

Authors: Asadullah Bhuiyan, Frank Marsiglio

Abstract: Floquet states have been used to describe the impact of periodic driving on lattice systems, either using a tight-binding model, or by using a continuum model where a Kronig-Penney-like description has been used to model spatially periodic systems in one dimension. A number of these studies have focused on finite systems, and results from these studies are distinct from those of infinite lattice s… ▽ More Floquet states have been used to describe the impact of periodic driving on lattice systems, either using a tight-binding model, or by using a continuum model where a Kronig-Penney-like description has been used to model spatially periodic systems in one dimension. A number of these studies have focused on finite systems, and results from these studies are distinct from those of infinite lattice systems as a consequence of boundary effects. In the case of a finite system, there remains a discrepancy in the results between tight-binding descriptions and continuous lattice models. Periodic driving by a time-dependent field in tight-binding models results in a collapse of all quasienergies within a band at special driving amplitudes. In the continuum model, on the other hand, a pair of nearly-degenerate edge bands emerge and remain gapped from the bulk bands as the field amplitude increases. We resolve these discrepancies and explain how these edge bands represent Schrödinger cat-like states with effective tunneling across the entire lattice. Moreover, we show that these extended cat-like states become perfectly localized at the edge sites when the external driving amplitude induces a collapse of the bulk bands. △ Less

Submitted 30 September, 2020; originally announced October 2020.

Comments: 16 pages, 13 figures, 3 appendices

Journal ref: Phys. Rev. B 102, 245302-1-14 (2020) https://journals.aps.org/prb/abstract/10.1103/PhysRevB.102.245302

Multi-Objective Optimization for Sustainable Closed-Loop Supply Chain Network Under Demand Uncertainty: A Genetic Algorithm

Authors: Ahmad Sobhan Abir, Ishtiaq Ahmed Bhuiyan, Mohammad Arani, Md Mashum Billal

Abstract: Supply chain management has been concentrated on productive ways to manage flows through a sophisticated vendor, manufacturer, and consumer networks for decades. Recently, energy and material rates have been greatly consumed to improve the sector, making sustainable development the core problem for advanced and developing countries. A new approach of supply chain management is proposed to maintain… ▽ More Supply chain management has been concentrated on productive ways to manage flows through a sophisticated vendor, manufacturer, and consumer networks for decades. Recently, energy and material rates have been greatly consumed to improve the sector, making sustainable development the core problem for advanced and developing countries. A new approach of supply chain management is proposed to maintain the economy along with the environment issue for the design of supply chain as well as the highest reliability in the planning horizon to fulfill customers demand as much as possible. This paper aims to optimize a new sustainable closed-loop supply chain network to maintain the financial along with the environmental factor to minimize the negative effect on the environment and maximize the average total number of products dispatched to customers to enhance reliability. The situation has been considered under demand uncertainty with warehouse reliability. This approach has been suggested the multi-objective mathematical model minimizing the total costs and total CO2 emissions and maximize the reliability in handling for establishing the closed-loop supply chain. Two optimization methods are used namely Multi-Objective Genetic Algorithm Optimization Method and Weighted Sum Method. Two results have shown the optimality of this approach. This paper also showed the optimal point using Pareto front for clear identification of optima. The results are approved to verify the efficiency of the model and the methods to maintain the financial, environmental, and reliability issues. △ Less

Submitted 9 October, 2020; v1 submitted 13 September, 2020; originally announced September 2020.

Comments: The current version of the paper has been accepted by the International Conference on Data Analytics for Business and Industry. http://data20.uob.edu.bh/

Direct observation of site-specific dopant substitution in Si doped (AlxGa1-x)2O3 via Atom Probe Tomography

Authors: Jith Sarker, A F M Anhar Uddin Bhuiyan, Zixuan Feng, Hongping Zhao, Baishakhi Mazumder

Abstract: In this work, the interaction of n-type dopants in Si doped (AlxGa1-x)2O3 films with varying Al content over the entire composition range (x = 0-100%) was analyzed using atom probe tomography. An almost uniform dopant distribution with dopant density in the range of 1018 cm-3 was obtained in all (AlxGa1-x)2O3 layers containing different Al contents. We have demonstrated that for the single phase \… ▽ More In this work, the interaction of n-type dopants in Si doped (AlxGa1-x)2O3 films with varying Al content over the entire composition range (x = 0-100%) was analyzed using atom probe tomography. An almost uniform dopant distribution with dopant density in the range of 1018 cm-3 was obtained in all (AlxGa1-x)2O3 layers containing different Al contents. We have demonstrated that for the single phase \b{eta}-(AlxGa1-x)2O3 films with Al content of x<0.30, dopants prefer to occupy on Ga sites while Al site is preferred for high Al content (x>0.50) (AlxGa1-x)2O3 layers. It was also observed for Al content, x = 0.30-0.50, no specific cationic site occupancy was observed, Si occupies either Al or Ga sites. This can be attributed to highly inhomogeneous layers within this composition range due to which dopant Si atoms are either in the Al-rich or Al-depleted regions. △ Less

Submitted 2 September, 2020; originally announced September 2020.

A Flow-Guided Mutual Attention Network for Video-Based Person Re-Identification

Authors: Madhu Kiran, Amran Bhuiyan, Louis-Antoine Blais-Morin, Mehrsan Javan, Ismail Ben Ayed, Eric Granger

Abstract: Person Re-Identification (ReID) is a challenging problem in many video analytics and surveillance applications, where a person's identity must be associated across a distributed non-overlapping network of cameras. Video-based person ReID has recently gained much interest because it allows capturing discriminant spatio-temporal information from video clips that is unavailable for image-based ReID.… ▽ More Person Re-Identification (ReID) is a challenging problem in many video analytics and surveillance applications, where a person's identity must be associated across a distributed non-overlapping network of cameras. Video-based person ReID has recently gained much interest because it allows capturing discriminant spatio-temporal information from video clips that is unavailable for image-based ReID. Despite recent advances, deep learning (DL) models for video ReID often fail to leverage this information to improve the robustness of feature representations. In this paper, the motion pattern of a person is explored as an additional cue for ReID. In particular, a flow-guided Mutual Attention network is proposed for fusion of image and optical flow sequences using any 2D-CNN backbone, allowing to encode temporal information along with spatial appearance information. Our Mutual Attention network relies on the joint spatial attention between image and optical flow features maps to activate a common set of salient features across them. In addition to flow-guided attention, we introduce a method to aggregate features from longer input streams for better video sequence-level representation. Our extensive experiments on three challenging video ReID datasets indicate that using the proposed Mutual Attention network allows to improve recognition accuracy considerably with respect to conventional gated-attention networks, and state-of-the-art methods for video-based person ReID. △ Less

Submitted 4 October, 2020; v1 submitted 9 August, 2020; originally announced August 2020.

Unsupervised Domain Adaptation in the Dissimilarity Space for Person Re-identification

Authors: Djebril Mekhazni, Amran Bhuiyan, George Ekladious, Eric Granger

Abstract: Person re-identification (ReID) remains a challenging task in many real-word video analytics and surveillance applications, even though state-of-the-art accuracy has improved considerably with the advent of deep learning (DL) models trained on large image datasets. Given the shift in distributions that typically occurs between video data captured from the source and target domains, and absence of… ▽ More Person re-identification (ReID) remains a challenging task in many real-word video analytics and surveillance applications, even though state-of-the-art accuracy has improved considerably with the advent of deep learning (DL) models trained on large image datasets. Given the shift in distributions that typically occurs between video data captured from the source and target domains, and absence of labeled data from the target domain, it is difficult to adapt a DL model for accurate recognition of target data. We argue that for pair-wise matchers that rely on metric learning, e.g., Siamese networks for person ReID, the unsupervised domain adaptation (UDA) objective should consist in aligning pair-wise dissimilarity between domains, rather than aligning feature representations. Moreover, dissimilarity representations are more suitable for designing open-set ReID systems, where identities differ in the source and target domains. In this paper, we propose a novel Dissimilarity-based Maximum Mean Discrepancy (D-MMD) loss for aligning pair-wise distances that can be optimized via gradient descent. From a person ReID perspective, the evaluation of D-MMD loss is straightforward since the tracklet information allows to label a distance vector as being either within-class or between-class. This allows approximating the underlying distribution of target pair-wise distances for D-MMD loss optimization, and accordingly align source and target distance distributions. Empirical results with three challenging benchmark datasets show that the proposed D-MMD loss decreases as source and domain distributions become more similar. Extensive experimental evaluation also indicates that UDA methods that rely on the D-MMD loss can significantly outperform baseline and state-of-the-art UDA methods for person ReID without the common requirement for data augmentation and/or complex networks. △ Less

Submitted 27 July, 2020; originally announced July 2020.

Comments: 14 pages (16 pages with references), 7 figures, conference ECCV

MSC Class: I.4.8

XI Commandments of Kubernetes Security: A Systematization of Knowledge Related to Kubernetes Security Practices

Authors: Md. Shazibul Islam Shamim, Farzana Ahamed Bhuiyan, Akond Rahman

Abstract: Kubernetes is an open-source software for automating management of computerized services. Organizations, such as IBM, Capital One and Adidas use Kubernetes to deploy and manage their containers, and have reported benefits related to deployment frequency. Despite reported benefits, Kubernetes deployments are susceptible to security vulnerabilities, such as those that occurred at Tesla in 2018. A sy… ▽ More Kubernetes is an open-source software for automating management of computerized services. Organizations, such as IBM, Capital One and Adidas use Kubernetes to deploy and manage their containers, and have reported benefits related to deployment frequency. Despite reported benefits, Kubernetes deployments are susceptible to security vulnerabilities, such as those that occurred at Tesla in 2018. A systematization of Kubernetes security practices can help practitioners mitigate vulnerabilities in their Kubernetes deployments. The goal of this paper is to help practitioners in securing their Kubernetes installations through a systematization of knowledge related to Kubernetes security practices. We systematize knowledge by applying qualitative analysis on 104 Internet artifacts. We identify 11 security practices that include (i) implementation of role-based access control (RBAC) authorization to provide least privilege, (ii) applying security patches to keep Kubernetes updated, and (iii) implementing pod and network specific security policies. △ Less

Submitted 26 June, 2020; originally announced June 2020.

Comments: Keywords: containers, devops, devsecops, grey literature, kubernetes, practices, review, security, systematization of knowledge

ACM Class: D.2

Database Optimization to Recommend Software Developers using Canonical Order Tree

Authors: T. M. Amir-Ul-Haque Bhuiyan, Mehedi Hasan Talukdar, Ziaur Rahman, Dr. Mohammad Motiur Rahman

Abstract: Recently frequent and sequential pattern mining algorithms have been widely used in the field of software engineering to mine various source code or specification patterns. In practice software evolves from one version to another is needed for providing extra facilities to user. This kind of task is challenging in this domain since the database is usually updated in all kinds of manners such as in… ▽ More Recently frequent and sequential pattern mining algorithms have been widely used in the field of software engineering to mine various source code or specification patterns. In practice software evolves from one version to another is needed for providing extra facilities to user. This kind of task is challenging in this domain since the database is usually updated in all kinds of manners such as insertion, various modifications as well as removal of sequences. If database is optimized then this optimized information will help developer in their development process and save their valuable time as well as development expenses. Some existing algorithms which are used to optimize database but it does not work faster when database is incrementally updated. To overcome this challenges an efficient algorithm is recently introduce, called the Canonical Order Tree that captures the content of the transactions of the database and orders. In this paper we have proposed a technique based on the Canonical Order Tree that can find out frequent patterns from the incremental database with speedy and efficient way. Thus the database will be optimized as well as it gives useful information to recommend software developer. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Comments: 4 Pages 8 Figures 7 Tables

ACM Class: D.1.1

Journal ref: 2015 International Conference on Advances in Electrical Engineering (ICAEE), Dhaka, 2015, pp. 157-160

Electrostatic Engineering using Extreme Permittivity Materials for Ultra-wide Bandgap Semiconductor Transistors

Authors: Nidhin Kurian Kalarickal, Zixuan Feng, A F M Anhar Uddin Bhuiyan, Zhanbo Xia, Joe F. McGlone, Wyatt Moore, Aaron R. Arehart, Steven A. Ringel, Hongping Zhao, Siddharth Rajan

Abstract: The performance of ultra-wide band gap materials like $β$-Ga$_\mathrm{2}$O$_\mathrm{3}$ is critically dependent on achieving high average electric fields within the active region of the device. In this report, we show that high-k gate dielectrics like BaTiO$_\mathrm{3}$ can provide an efficient field management strategy by improving the uniformity of electric field profile in the gate-drain region… ▽ More The performance of ultra-wide band gap materials like $β$-Ga$_\mathrm{2}$O$_\mathrm{3}$ is critically dependent on achieving high average electric fields within the active region of the device. In this report, we show that high-k gate dielectrics like BaTiO$_\mathrm{3}$ can provide an efficient field management strategy by improving the uniformity of electric field profile in the gate-drain region of lateral field effect transistors. Using this strategy, we were able to achieve high average breakdown fields of 1.5 MV/cm and 4 MV/cm at gate-drain spacing (L$_\mathrm{gd}$) of 6 um and 0.6 um respectively in $β$-Ga$_\mathrm{2}$O$_\mathrm{3}$, at a high channel sheet charge density of 1.8x10$^\mathrm{13}$cm$^\mathrm{-2}$. The high sheet charge density together with high breakdown field enabled a record power figure of merit (V$^\mathrm{2}$$_\mathrm{br}$/R$_\mathrm{on}$) of 376 MW/cm$^\mathrm{2}$ at a gate-drain spacing of 3 um. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Probing charge transport and background doping in MOCVD grown (010) $β$-Ga$_{2}$O$_{3}$

Authors: Zixuan Feng, A F M Anhar Uddin Bhuiyan, Zhanbo Xia, Wyatt Moore, Zhaoying Chen, Joe F. McGlone, David R. Daughton, Aaron R. Arehart, Steven A. Ringel, Siddharth Rajan, Hongping Zhao

Abstract: A new record-high room temperature electron Hall mobility ($μ_{RT} = 194\space cm^{2}/V\space s$ at $n\sim 8\times 10^{15}\space cm^{-3}$) for $β$-Ga2O3 is demonstrated in the unintentionally doped thin film grown on (010) semi-insulating substrate via metalorganic chemical vapor deposition (MOCVD). A peak electron mobility of $\sim 9500\space cm^{2}/V\space s$ is achieved at 45 K. Further investi… ▽ More A new record-high room temperature electron Hall mobility ($μ_{RT} = 194\space cm^{2}/V\space s$ at $n\sim 8\times 10^{15}\space cm^{-3}$) for $β$-Ga2O3 is demonstrated in the unintentionally doped thin film grown on (010) semi-insulating substrate via metalorganic chemical vapor deposition (MOCVD). A peak electron mobility of $\sim 9500\space cm^{2}/V\space s$ is achieved at 45 K. Further investigation on the transport properties indicate the existence of sheet charges near the epi-layer/substrate interface. Si is identified as the primary contributor to the background carrier in both the epi-layer and the interface, originated from both surface contamination as well as growth environment. Pre-growth hydrofluoric acid cleaning of the substrate lead to an obvious decrease of Si impurity both at interface and in epi-layer. In addition, the effect of MOCVD growth condition, particularly the chamber pressure, on the Si impurity incorporation is studied. A positive correlation between the background charge concentration and the MOCVD growth pressure is confirmed. It is noteworthy that in a $β$-Ga2O3 film with very low bulk charge concentration, even a reduced sheet charge density can play an important role in the charge transport properties. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: 19 pages, 5 figures

A Semi-Dynamic Bus Routing Infrastructure based on MBTA Bus Data

Authors: Movses Musaelian, Anane Boateng, Md Zakirul Alam Bhuiyan

Abstract: Transportation is quickly evolving in the emerging smart city ecosystem with personalized ride sharing services quickly advancing. Yet, the public bus infrastructure has been slow to respond to these trends. With our research, we propose a semi-dynamic bus routing framework that is data-driven and responsive to relevant parameters in bus transport. We use newly published bus event data from a bus… ▽ More Transportation is quickly evolving in the emerging smart city ecosystem with personalized ride sharing services quickly advancing. Yet, the public bus infrastructure has been slow to respond to these trends. With our research, we propose a semi-dynamic bus routing framework that is data-driven and responsive to relevant parameters in bus transport. We use newly published bus event data from a bus line in Boston and several algorithmic heuristics to create this framework and demonstrate the capabilities and results. We find that this approach yields a very promising routing infrastructure that is smarter and more dynamic than the existing system. △ Less

Submitted 29 March, 2020; originally announced April 2020.

Comments: 22 pages, 9 figures

Landau Levels and the Issue of Gauge Invariance in Confined Spaces

Authors: Asadullah Bhuiyan, Frank Marsiglio

Abstract: We examine the behaviour of a charged particle in a two-dimensional confining potential, in the presence of a magnetic field. The confinement serves to remove the otherwise infinite degeneracy, but additional ingredients are required to produce sensible results. We treat both circular and square geometries, and in the latter we explicitly demonstrate the gauge invariance of the energy levels and w… ▽ More We examine the behaviour of a charged particle in a two-dimensional confining potential, in the presence of a magnetic field. The confinement serves to remove the otherwise infinite degeneracy, but additional ingredients are required to produce sensible results. We treat both circular and square geometries, and in the latter we explicitly demonstrate the gauge invariance of the energy levels and wave function amplitudes. Both bulk states and edge states are examined, and in the latter case, with sufficiently high quantum numbers we achieve significant differences in the square and circular geometries. Results are achieved using straightforward matrix mechanics, in a manner that is accessible to novices in the field. △ Less

Submitted 30 May, 2020; v1 submitted 12 January, 2020; originally announced January 2020.

Comments: new version, sections rewritten

Journal ref: Am. J. Phys. 88, 986-1005 (2020)

Power Comparisons in 2x2 Contingency Tables: Odds Ratio versus Pearson Correlation versus Canonical Correlation

Authors: Mohammad Alfrad Nobel Bhuiyan, Michael J Wathen, M Bhaskara Rao

Abstract: It is an important inferential problem to test no association between two binary variables based on data. Tests based on the sample odds ratio are commonly used. We bring in a competing test based on the Pearson correlation coefficient. In particular, the Odds ratio does not extend to higher order contingency tables, whereas Pearson correlation does. It is important to understand how Pearson corre… ▽ More It is an important inferential problem to test no association between two binary variables based on data. Tests based on the sample odds ratio are commonly used. We bring in a competing test based on the Pearson correlation coefficient. In particular, the Odds ratio does not extend to higher order contingency tables, whereas Pearson correlation does. It is important to understand how Pearson correlation stacks against the odds ratio in 2x2 tables. Another measure of association is the canonical correlation. In this paper, we examine how competitive Pearson correlation is vis-à-vis odds ratio in terms of power in the binary context, contrasting further with both the Wald Z and Rao Score tests. We generated an extensive collection of joint distributions of the binary variables and estimated the power of the tests under each joint alternative distribution based on random samples. The consensus is that none of the tests dominates the other. △ Less

Submitted 24 December, 2019; originally announced December 2019.

Bayesian Shape Invariant Model for Latent Growth Curve with Time-Invariant Covariates

Authors: Mohammad Alfrad Nobel Bhuiyan, Heidi Sucharew, Rhonda Szczesniak, Marepalli Rao, Jessica Woo, Jane Khoury, Md Monir Hossain

Abstract: In the attention-deficit hyperactivity disorder (ADHD) study, children are prescribed different stimulant medications. The height measurements are recorded longitudinally along with the medication time. Differences among the patients are captured by the parameters suggested the Superimposition by Translation and Rotation (SITAR) model using three subject-specific parameters to estimate their devia… ▽ More In the attention-deficit hyperactivity disorder (ADHD) study, children are prescribed different stimulant medications. The height measurements are recorded longitudinally along with the medication time. Differences among the patients are captured by the parameters suggested the Superimposition by Translation and Rotation (SITAR) model using three subject-specific parameters to estimate their deviation from the mean growth curve. In this paper, we generalize the SITAR model in a Bayesian way with time-invariant covariates. The time-invariant model allows us to predict latent growth factors. Since patients suffer from a common disease, they usually exhibit a similar pattern, and it is natural to build a nonlinear model that is shaped invariant. The model is semi-parametric, where the population time curve is modeled with a natural cubic spline. The original shape invariant growth curve model, motivated by epidemiological research on the evolution of pubertal heights over time, fits the underlying shape function for height over age and estimates subject-specific deviations from this curve in terms of size, tempo, and velocity using maximum likelihood. The usefulness of the model is illustrated in the attention deficit hyperactivity disorder (ADHD) study. Further, we demonstrated the effect of stimulant medications on pubertal growth by gender. △ Less

Submitted 24 March, 2021; v1 submitted 23 December, 2019; originally announced December 2019.

Differential impact of acute fine particulate matter exposure on risk of stroke by stroke subtype, age, sex, and race: a case-crossover study

Authors: Mohammad Alfrad Nobel Bhuiyan, Cole Brokamp, Tracy E. Madsen, Jane C. Khoury, Heidi Sucharew, Kathleen Alwell, Charles J. Moomaw, Monir Hossain, Matthew L. Flaherty, Daniel Woo, Jason Mackey, Felipe De Los Rios La Rosa, Sharyl Martini, Simona Ferioli, Opeolu Adeoye, Brett M. Kissela, Dawn Kleindorfer

Abstract: Objective: Association between acute ambient fine particulate matter (PM2.5, aerodynamic diameter less than 2.5 and cardiovascular events are well documented. However, it remains unclear whether acute exposure to PM2.5 acts as a trigger for hemorrhagic (intracerebral or subarachnoid hemorrhage) or non-hemorrhagic (infarct or transient ischemic attack) stroke onset. We, therefore, examined the asso… ▽ More Objective: Association between acute ambient fine particulate matter (PM2.5, aerodynamic diameter less than 2.5 and cardiovascular events are well documented. However, it remains unclear whether acute exposure to PM2.5 acts as a trigger for hemorrhagic (intracerebral or subarachnoid hemorrhage) or non-hemorrhagic (infarct or transient ischemic attack) stroke onset. We, therefore, examined the association between ambient PM2.5 and stroke onset, and whether this relationship differs by stroke subtype, age, sex, and race. Methods: We used a time-stratified case-crossover design to examine the association between exposure to PM2.5 and stroke onset for the calendar year 2010. Data were collected from the Greater Cincinnati Northern Kentucky Stroke Study. We included patients 20 years and older, initially ascertained through hospital ICD-9 discharge codes. Daily ambient concentrations of PM2.5 were estimated from the patient's residential addresses using a spatiotemporal model. Conclusion: Our findings suggest that short-term PM2.5 exposure, particularly at three days before the event, is associated with stroke onset but varies according to stroke subtype, age, sex, and race. △ Less

Submitted 31 December, 2019; v1 submitted 19 December, 2019; originally announced December 2019.

Comments: One coauthor didnt want to submit the paper on the arxiv

Source-specific contributions of particulate matter to asthma-related pediatric emergency department utilization

Authors: Mohammad Alfrad Nobel Bhuiyan, Patrick Ryan, Farzan Oroumyeh, Yajna Jathan, Madhumitaa Roy, Siv Balachandran, Cole Brokamp

Abstract: Few studies have linked specific sources of ambient particulate matter smaller than 2.5 $μ$m (PM2.5) and asthma. In this study, we estimated the contributions of specific sources to PM2.5 and examined their association with daily asthma hospital utilization in Cincinnati, Ohio, USA. We used Poisson regression models to estimate the daily number of asthma ED visits the day of and one, and two days… ▽ More Few studies have linked specific sources of ambient particulate matter smaller than 2.5 $μ$m (PM2.5) and asthma. In this study, we estimated the contributions of specific sources to PM2.5 and examined their association with daily asthma hospital utilization in Cincinnati, Ohio, USA. We used Poisson regression models to estimate the daily number of asthma ED visits the day of and one, and two days following separate increases in PM2.5 and its source components, adjusting for temporal trends, holidays, temperature, and humidity. In addition, we used a model-based clustering method to group days with similar source-specific contributions into six distinct clusters. Specifically, elevated PM2.5 concentrations occurring on days characterized by low contributions of coal combustion showed a significantly reduced risk of hospital utilization for asthma (rate ratio: 0.86, 95% CI: [0.77, 0.95]) compared to other clusters. Reducing the contribution of coal combustion to PM2.5 levels could be an effective intervention for reducing asthma-related hospital utilization. △ Less

Submitted 31 December, 2019; v1 submitted 19 December, 2019; originally announced December 2019.

Comments: my coauthors doesnt want to keep the paper in the arxiv

Mobile APP User Attribute Prediction by Heterogeneous Information Network Modeling

Authors: Hekai Zhang, Jibing Gong, Zhiyong Teng, Dan Wang, Hongfei Wang, Linfeng Du, Zakirul Alam Bhuiyan

Abstract: User-based attribute information, such as age and gender, is usually considered as user privacy information. It is difficult for enterprises to obtain user-based privacy attribute information. However, user-based privacy attribute information has a wide range of applications in personalized services, user behavior analysis and other aspects. this paper advances the HetPathMine model and puts forwa… ▽ More User-based attribute information, such as age and gender, is usually considered as user privacy information. It is difficult for enterprises to obtain user-based privacy attribute information. However, user-based privacy attribute information has a wide range of applications in personalized services, user behavior analysis and other aspects. this paper advances the HetPathMine model and puts forward TPathMine model. With applying the number of clicks of attributes under each node to express the user's emotional preference information, optimizations of the solution of meta-path weight are also presented. Based on meta-path in heterogeneous information networks, the new model integrates all relationships among objects into isomorphic relationships of classified objects. Matrix is used to realize the knowledge dissemination of category knowledge among isomorphic objects. The experimental results show that: (1) the prediction of user attributes based on heterogeneous information networks can achieve higher accuracy than traditional machine learning classification methods; (2) TPathMine model based on the number of clicks is more accurate in classifying users of different age groups, and the weight of each meta-path is consistent with human intuition or the real world situation. △ Less

Submitted 6 October, 2019; originally announced October 2019.

Comments: 10 pages,3 figures,International Conference on Dependability in Sensor, Cloud, and Big Data Systems and Applications

Exploiting Prunability for Person Re-Identification

Authors: Hugo Masson, Amran Bhuiyan, Le Thanh Nguyen-Meidine, Mehrsan Javan, Parthipan Siva, Ismail Ben Ayed, Eric Granger

Abstract: Recent years have witnessed a substantial increase in the deep learning (DL)architectures proposed for visual recognition tasks like person re-identification,where individuals must be recognized over multiple distributed cameras. Althoughthese architectures have greatly improved the state-of-the-art accuracy, thecomputational complexity of the CNNs commonly used for feature extractionremains an is… ▽ More Recent years have witnessed a substantial increase in the deep learning (DL)architectures proposed for visual recognition tasks like person re-identification,where individuals must be recognized over multiple distributed cameras. Althoughthese architectures have greatly improved the state-of-the-art accuracy, thecomputational complexity of the CNNs commonly used for feature extractionremains an issue, hindering their deployment on platforms with limited resources,or in applications with real-time constraints. There is an obvious advantage toaccelerating and compressing DL models without significantly decreasing theiraccuracy. However, the source (pruning) domain differs from operational (target)domains, and the domain shift between image data captured with differentnon-overlapping camera viewpoints leads to lower recognition accuracy. In thispaper, we investigate the prunability of these architectures under different designscenarios. This paper first revisits pruning techniques that are suitable forreducing the computational complexity of deep CNN networks applied to personre-identification. Then, these techniques are analysed according to their pruningcriteria and strategy, and according to different scenarios for exploiting pruningmethods to fine-tuning networks to target domains. Experimental resultsobtained using DL models with ResNet feature extractors, and multiplebenchmarks re-identification datasets, indicate that pruning can considerablyreduce network complexity while maintaining a high level of accuracy. Inscenarios where pruning is performed with large pre-training or fine-tuningdatasets, the number of FLOPS required by ResNet architectures is reduced byhalf, while maintaining a comparable rank-1 accuracy (within 1% of the originalmodel). Pruning while training a larger CNNs can also provide a significantlybetter performance than fine-tuning smaller ones. △ Less

Submitted 14 April, 2021; v1 submitted 4 July, 2019; originally announced July 2019.

Comments: Accepted for EURASIP Journal on Image and Video Processing

On the capacitive properties of individual microtubules and their meshworks

Authors: Aarat Kalra, Sahil Patel, Asadullah Bhuiyan, Jordane Preto, Kyle Scheuer, Usman Mohammed, John Lewis, Vahid Rezania, Karthik Shankar, Jack A. Tuszynski

Abstract: Microtubules are hollow cylindrical polymers composed of the highly negatively-charged (~23e), high dipole moment (1750 D) protein a,b-tubulin. While the roles of microtubules in chromosomal segregation, macromolecular transport and cell migration are relatively well-understood, studies on the electrical properties of microtubules have only recently gained strong interest. Here, we show that while… ▽ More Microtubules are hollow cylindrical polymers composed of the highly negatively-charged (~23e), high dipole moment (1750 D) protein a,b-tubulin. While the roles of microtubules in chromosomal segregation, macromolecular transport and cell migration are relatively well-understood, studies on the electrical properties of microtubules have only recently gained strong interest. Here, we show that while microtubules at physiological concentrations increase solution capacitance, free tubulin has no appreciable effect. For a particular microtubule concentration, we were able to quantify these effects by determining the capacitance and resistance of a single 20 um-long microtubule to be 1.86 x 10^(-12) F and 1.07 x 10^12 Ohms respectively. Further, we observed a decrease in electrical resistance of solution, with charge transport peaking between 20-60 Hz in the presence of microtubules, consistent with recent findings that microtubules exhibit electric oscillations at such low frequencies. Our results show that in addition to macromolecular transport, microtubules also act as charge-storage devices through counterionic condensation across a broad frequency spectrum. We conclude with a hypothesis of an electrically-tunable cytoskeleton where the dielectric properties of tubulin are polymerization-state dependent. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Comments: In submission

Disease Identification From Unstructured User Input

Authors: Fahim Faisal, Shafkat Ahmed Bhuiyan, Dr. Abu Raihan Mostofa Kamal

Abstract: A method to identify probable diseases from the unstructured textual input (eg, health forum posts) by incorporating a lexicographic and semantic feature based two-phase text classification module and a symptom-disease correlation-based similarity measurement module. One notable aspect of my approach was to develop a competent algorithm to extract all inherent features from the data source to make… ▽ More A method to identify probable diseases from the unstructured textual input (eg, health forum posts) by incorporating a lexicographic and semantic feature based two-phase text classification module and a symptom-disease correlation-based similarity measurement module. One notable aspect of my approach was to develop a competent algorithm to extract all inherent features from the data source to make a better decision. △ Less

Submitted 10 May, 2019; v1 submitted 1 May, 2019; originally announced May 2019.

Comments: This was an undergraduate research. The hypotheses it proposes is based on a small number of samples and thus, can not be declared significant. To declare it significant, a large number of sample testing is needed. After that, it can be put through

Volatility Models Applied to Geophysics and High Frequency Financial Market Data

Authors: Maria C Mariani, Md Al Masum Bhuiyan, Osei K Tweneboah, Hector Gonzalez-Huizar, Ionut Florescu

Abstract: This work is devoted to the study of modeling geophysical and financial time series. A class of volatility models with time-varying parameters is presented to forecast the volatility of time series in a stationary environment. The modeling of stationary time series with consistent properties facilitates prediction with much certainty. Using the GARCH and stochastic volatility model, we forecast on… ▽ More This work is devoted to the study of modeling geophysical and financial time series. A class of volatility models with time-varying parameters is presented to forecast the volatility of time series in a stationary environment. The modeling of stationary time series with consistent properties facilitates prediction with much certainty. Using the GARCH and stochastic volatility model, we forecast one-step-ahead suggested volatility with +/- 2 standard prediction errors, which is enacted via Maximum Likelihood Estimation. We compare the stochastic volatility model relying on the filtering technique as used in the conditional volatility with the GARCH model. We conclude that the stochastic volatility is a better forecasting tool than GARCH (1, 1), since it is less conditioned by autoregressive past information. △ Less

Submitted 25 January, 2019; originally announced January 2019.

Comments: 30 Pages, 23 figures

Journal ref: Physica A: Statistical Mechanics and its Applications, Volume 503, 1 August 2018, Pages 304-321

Cross-Modal Distillation for RGB-Depth Person Re-Identification

Authors: Frank Hafner, Amran Bhuiyan, Julian F. P. Kooij, Eric Granger

Abstract: Person re-identification is a key challenge for surveillance across multiple sensors. Prompted by the advent of powerful deep learning models for visual recognition, and inexpensive RGB-D cameras and sensor-rich mobile robotic platforms, e.g. self-driving vehicles, we investigate the relatively unexplored problem of cross-modal re-identification of persons between RGB (color) and depth images. The… ▽ More Person re-identification is a key challenge for surveillance across multiple sensors. Prompted by the advent of powerful deep learning models for visual recognition, and inexpensive RGB-D cameras and sensor-rich mobile robotic platforms, e.g. self-driving vehicles, we investigate the relatively unexplored problem of cross-modal re-identification of persons between RGB (color) and depth images. The considerable divergence in data distributions across different sensor modalities introduces additional challenges to the typical difficulties like distinct viewpoints, occlusions, and pose and illumination variation. While some work has investigated re-identification across RGB and infrared, we take inspiration from successes in transfer learning from RGB to depth in object detection tasks. Our main contribution is a novel method for cross-modal distillation for robust person re-identification, which learns a shared feature representation space of person's appearance in both RGB and depth images. In addition, we propose a cross-modal attention mechanism where the gating signal from one modality can dynamically activate the most discriminant CNN filters of the other modality. The proposed distillation method is compared to conventional and deep learning approaches proposed for other cross-domain re-identification tasks. Results obtained on the public BIWI and RobotPKU datasets indicate that the proposed method can significantly outperform the state-of-the-art approaches by up to 16.1% in mean Average Precision (mAP), demonstrating the benefit of the distillation paradigm. The experimental results also indicate that using cross-modal attention allows to improve recognition accuracy considerably with respect to the proposed distillation method and relevant state-of-the-art approaches. △ Less

Submitted 12 February, 2022; v1 submitted 27 October, 2018; originally announced October 2018.

Journal ref: Computer Vision and Image Understanding, 103352 (2022)

Unsupervised Adaptive Re-identification in Open World Dynamic Camera Networks

Authors: Rameswar Panda, Amran Bhuiyan, Vittorio Murino, Amit K. Roy-Chowdhury

Abstract: Person re-identification is an open and challenging problem in computer vision. Existing approaches have concentrated on either designing the best feature representation or learning optimal matching metrics in a static setting where the number of cameras are fixed in a network. Most approaches have neglected the dynamic and open world nature of the re-identification problem, where a new camera may… ▽ More Person re-identification is an open and challenging problem in computer vision. Existing approaches have concentrated on either designing the best feature representation or learning optimal matching metrics in a static setting where the number of cameras are fixed in a network. Most approaches have neglected the dynamic and open world nature of the re-identification problem, where a new camera may be temporarily inserted into an existing system to get additional information. To address such a novel and very practical problem, we propose an unsupervised adaptation scheme for re-identification models in a dynamic camera network. First, we formulate a domain perceptive re-identification method based on geodesic flow kernel that can effectively find the best source camera (already installed) to adapt with a newly introduced target camera, without requiring a very expensive training phase. Second, we introduce a transitive inference algorithm for re-identification that can exploit the information from best source camera to improve the accuracy across other camera pairs in a network of multiple cameras. Extensive experiments on four benchmark datasets demonstrate that the proposed approach significantly outperforms the state-of-the-art unsupervised learning based alternatives whilst being extremely efficient to compute. △ Less

Submitted 9 June, 2017; originally announced June 2017.

Comments: CVPR 2017 Spotlight