-
Malleable Robots: Reconfigurable Robotic Arms with Continuum Links of Variable Stiffness
Authors:
Angus B. Clark,
Nicolas Rojas
Abstract:
Through the implementation of reconfigurability to achieve flexibility and adaptation to tasks by morphology changes rather than by increasing the number of joints, malleable robots present advantages over traditional serial robot arms in regards to reduced weight, size, and cost. While limited in degrees of freedom (DOF), malleable robots still provide versatility across operations typically serv…
▽ More
Through the implementation of reconfigurability to achieve flexibility and adaptation to tasks by morphology changes rather than by increasing the number of joints, malleable robots present advantages over traditional serial robot arms in regards to reduced weight, size, and cost. While limited in degrees of freedom (DOF), malleable robots still provide versatility across operations typically served by systems using higher DOF than required by the tasks. In this paper, we present the creation of a 2-DOF malleable robot, detailing the design of joints and malleable link, along with its modelling through forward and inverse kinematics, and a reconfiguration methodology that informs morphology changes based on end effector location -- determining how the user should reshape the robot to enable a task previously unattainable. The recalibration and motion planning for making robot motion possible after reconfiguration are also discussed, and thorough experiments with the prototype to evaluate accuracy and reliability of the system are presented. Results validate the approach and pave the way for further research in the area.
△ Less
Submitted 15 April, 2024;
originally announced July 2024.
-
Stiffness-Tuneable Limb Segment with Flexible Spine for Malleable Robots
Authors:
Angus B. Clark,
Nicolas Rojas
Abstract:
Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to different tasks with less than six degrees of freedom, a concept that we call malleable robots. Known stiffening mechanisms may be used to implement suitable links…
▽ More
Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to different tasks with less than six degrees of freedom, a concept that we call malleable robots. Known stiffening mechanisms may be used to implement suitable links for these novel robotic manipulators; however, these solutions usually show a reduced performance when bending due to structural deformation. By including an inner support structure this deformation can be minimised, resulting in an increased stiffening performance. This paper presents a new multi-material spine-inspired flexible structure for providing support in stiffness-controllable layer-jamming-based robotic links of large diameter. The proposed spine mechanism is highly movable with type and range of motions that match those of a robotic link using solely layer jamming, whilst maintaining a hollow and light structure. The mechanics and design of the flexible spine are explored, and a prototype of a link utilising it is developed and compared with limb segments based on granular jamming and layer jamming without support structure. Results of experiments verify the advantages of the proposed design, demonstrating that it maintains a constant central diameter across bending angles and presents an improvement of more than 203% of resisting force at 180 degrees.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
An Origami-Inspired Variable Friction Surface for Increasing the Dexterity of Robotic Grippers
Authors:
Qiujie Lu,
Angus B. Clark,
Matthew Shen,
Nicolas Rojas
Abstract:
While the grasping capability of robotic grippers has shown significant development, the ability to manipulate objects within the hand is still limited. One explanation for this limitation is the lack of controlled contact variation between the grasped object and the gripper. For instance, human hands have the ability to firmly grip object surfaces, as well as slide over object faces, an aspect th…
▽ More
While the grasping capability of robotic grippers has shown significant development, the ability to manipulate objects within the hand is still limited. One explanation for this limitation is the lack of controlled contact variation between the grasped object and the gripper. For instance, human hands have the ability to firmly grip object surfaces, as well as slide over object faces, an aspect that aids the enhanced manipulation of objects within the hand without losing contact. In this letter, we present a parametric, origami-inspired thin surface capable of transitioning between a high friction and a low friction state, suitable for implementation as an epidermis in robotic fingers. A numerical analysis of the proposed surface based on its design parameters, force analysis, and performance in in-hand manipulation tasks is presented. Through the development of a simple two-fingered two-degree-of-freedom gripper utilizing the proposed variable-friction surfaces with different parameters, we experimentally demonstrate the improved manipulation capabilities of the hand when compared to the same gripper without changeable friction. Results show that the pattern density and valley gap are the main parameters that effect the in-hand manipulation performance. The origami-inspired thin surface with a higher pattern density generated a smaller valley gap and smaller height change, producing a more stable improvement of the manipulation capabilities of the hand.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
A Continuum Manipulator for Open-Source Surgical Robotics Research and Shared Development
Authors:
Angus B. Clark,
Visakan Mathivannan,
Nicolas Rojas
Abstract:
Many have explored the application of continuum robot manipulators for minimally invasive surgery, and have successfully demonstrated the advantages their flexible design provides -- with some solutions having reached commercialisation and clinical practice. However, the usual high complexity and closed-nature of such designs has traditionally restricted the shared development of continuum robots…
▽ More
Many have explored the application of continuum robot manipulators for minimally invasive surgery, and have successfully demonstrated the advantages their flexible design provides -- with some solutions having reached commercialisation and clinical practice. However, the usual high complexity and closed-nature of such designs has traditionally restricted the shared development of continuum robots across the research area, thus impacting further progress and the solution of open challenges. In order to close this gap, this paper introduces ENDO, an open-source 3-segment continuum robot manipulator with control and actuation mechanism, whose focus is on simplicity, affordability, and accessibility. This robotic system is fabricated from low cost off-the-shelf components and rapid prototyping methods, and its information for implementation (and that of future iterations), including CAD files and source code, is available to the public on the Open Source Medical Robots initiative's repository on GitHub (https://github.com/OpenSourceMedicalRobots), with the control library also available directly from Arduino. Herein, we present details of the robot design and control, validate functionality by experimentally evaluating its workspace, and discuss possible paths for future development.
△ Less
Submitted 4 January, 2021;
originally announced January 2021.
-
Design and Workspace Characterisation of Malleable Robots
Authors:
Angus B. Clark,
Nicolas Rojas
Abstract:
For the majority of tasks performed by traditional serial robot arms, such as bin picking or pick and place, only two or three degrees of freedom (DOF) are required for motion; however, by augmenting the number of degrees of freedom, further dexterity of robot arms for multiple tasks can be achieved. Instead of increasing the number of joints of a robot to improve flexibility and adaptation, which…
▽ More
For the majority of tasks performed by traditional serial robot arms, such as bin picking or pick and place, only two or three degrees of freedom (DOF) are required for motion; however, by augmenting the number of degrees of freedom, further dexterity of robot arms for multiple tasks can be achieved. Instead of increasing the number of joints of a robot to improve flexibility and adaptation, which increases control complexity, weight, and cost of the overall system, malleable robots utilise a variable stiffness link between joints allowing the relative positioning of the revolute pairs at each end of the link to vary, thus enabling a low DOF serial robot to adapt across tasks by varying its workspace. In this paper, we present the design and prototyping of a 2-DOF malleable robot, calculate the general equation of its workspace using a parameterisation based on distance geometry---suitable for robot arms of variable topology, and characterise the workspace categories that the end effector of the robot can trace via reconfiguration. Through the design and construction of the malleable robot we explore design considerations, and demonstrate the viability of the overall concept. By using motion tracking on the physical robot, we show examples of the infinite number of workspaces that the introduced 2-DOF malleable robot can achieve.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
AdS-Sliced Flavor Branes and Adding Flavor to the Janus Solution
Authors:
Adam B. Clark,
Nathan Crossette,
George M. Newman,
Andrea Rommal
Abstract:
We implement D7 flavor branes in AdS-sliced coordinates on $AdS_5\times S^5$ with the ansatz that the brane fluctuates only in the warped ($μ$) direction in this slicing, which is particularly appropriate for studying the Janus solution. The natural field theory dual in this slicing is $\mathcal{N}=4$ super Yang-Mills on two copies of $AdS_4$. Branes extending from $μ=\pmπ/2$ can end at different…
▽ More
We implement D7 flavor branes in AdS-sliced coordinates on $AdS_5\times S^5$ with the ansatz that the brane fluctuates only in the warped ($μ$) direction in this slicing, which is particularly appropriate for studying the Janus solution. The natural field theory dual in this slicing is $\mathcal{N}=4$ super Yang-Mills on two copies of $AdS_4$. Branes extending from $μ=\pmπ/2$ can end at different locations, giving rise to quarks with piecewise constant mass on each $AdS_4$ half-space, jumping discontinuously between them. A second class of flavor brane solutions exists in this coordinate system, dubbed "continuous" flavor branes, that extend across the entire range of $μ$. We propose that the correct dual interpretation of "disconnected" flavor brane in this ansatz is a quark hypermultiplet with constant mass on one of the AdS$_4$ half-spaces with totally reflecting boundary conditions at the boundary of AdS$_4$; whereas the dual interpretation of a continuous flavor brane has totally transparent boundary conditions. Numerical studies indicate that AdS-sliced D7 flavor branes of both classes exhibit spontaneous chiral symmetry breaking, as non-zero vev persists for solutions of the equation of motion down to zero mass. Continuous flavor branes in this ansatz exhibit many other surprising behaviors: their masses seem to be capped at a modest value near $m=0.551$ in units of the inverse AdS radius, and there may be a phase transition between continuous branes of different configurations. We also numerically study quark states in Janus. The behavior of mass and vev is similar in Janus, including the existence of chiral symmetry breaking at zero mass, though qualitative features of the phase diagram change (sometimes significantly) as the Janus parameter $c_0$ increases.
△ Less
Submitted 2 October, 2013; v1 submitted 30 September, 2013;
originally announced September 2013.
-
Energy Positivity, Non-Renormalization, and Holomorphy in Lorentz-Violating Supersymmetric Theories
Authors:
Adam B. Clark
Abstract:
This paper shows that the positive-energy and non-renormalization theorems of traditional supersymmetry survive the addition of Lorentz violating interactions. The Lorentz-violating coupling constants in theories using the construction of Berger and Kostelecky must obey certain constraints in order to preserve the positive energy theorem. Seiberg's holomorphic arguments are used to prove that the…
▽ More
This paper shows that the positive-energy and non-renormalization theorems of traditional supersymmetry survive the addition of Lorentz violating interactions. The Lorentz-violating coupling constants in theories using the construction of Berger and Kostelecky must obey certain constraints in order to preserve the positive energy theorem. Seiberg's holomorphic arguments are used to prove that the superpotential remains non-renormalized (perturbatively) in the presence of Lorentz-violating interactions of the Berger-Kostelecky type. We briefly comment on Lorentz-violating theories of the type constructed by Nibbelink and Pospelov to note that holomorphy arguments offer elegant proofs of many non-renormalization results, some known by other arguments, some new.
△ Less
Submitted 7 August, 2013; v1 submitted 1 March, 2013;
originally announced March 2013.
-
The CFT/AdS correspondence, massive gravitons and a connectivity index conjecture
Authors:
Ofer Aharony,
Adam B. Clark,
Andreas Karch
Abstract:
We discuss the general question of which conformal field theories have dual descriptions in terms of quantum gravity theories on anti-de Sitter space. We analyze in detail the case of a deformed product of n conformal field theories (each of which has a gravity dual), and we claim that the dual description of this is by a quantum gravity theory on a union of n anti-de Sitter spaces, connected at…
▽ More
We discuss the general question of which conformal field theories have dual descriptions in terms of quantum gravity theories on anti-de Sitter space. We analyze in detail the case of a deformed product of n conformal field theories (each of which has a gravity dual), and we claim that the dual description of this is by a quantum gravity theory on a union of n anti-de Sitter spaces, connected at their boundary (by correlations between their boundary conditions). On this union of spaces, (n-1) linear combinations of gravitons obtain a mass, and we compute this mass both from the field theory and from the gravity sides of the correspondence, finding the same result in both computations. This is the first example in which a graviton mass in the bulk of anti-de Sitter space arises continuously by varying parameters. The analysis of these deformed product theories leads us to suggest that field theories may be generally classified by a "connectivity index", corresponding to the number of components (connected at the boundary) in the space-time of the dual gravitational background. In the field theory this index roughly counts the number of independent gauge groups, but we do not have a precise general formula for the index.
△ Less
Submitted 28 August, 2006; v1 submitted 14 August, 2006;
originally announced August 2006.
-
Super Janus
Authors:
A. B. Clark,
A. Karch
Abstract:
We propose and study a supersymmetric version of the Janus domain wall solution of type IIB supergravity. Janus is dual to N=4 super Yang Mills theory with a coupling constant that jumps across an interface. While the interface in the Janus field theory completely breaks all supersymmetries, it was found earlier that some supersymmetry can be restored in the field theory at the cost of breaking…
▽ More
We propose and study a supersymmetric version of the Janus domain wall solution of type IIB supergravity. Janus is dual to N=4 super Yang Mills theory with a coupling constant that jumps across an interface. While the interface in the Janus field theory completely breaks all supersymmetries, it was found earlier that some supersymmetry can be restored in the field theory at the cost of breaking the SO(6) R-symmetry down to at least SU(3). We find the gravity dual to this supersymmetric interface theory by studying the SU(3) invariant subsector of N=8 gauged supergravity in 5D, which is described by 5D N=2 gauged supergravity with one hypermultiplet.
△ Less
Submitted 19 July, 2005; v1 submitted 30 June, 2005;
originally announced June 2005.
-
The dual of Janus -:- an interface CFT
Authors:
A. B. Clark,
D. Z. Freedman,
A. Karch,
M. Schnabl
Abstract:
We propose and study a specific gauge theory dual of the smooth, non-supersymmetric (and apparently stable) Janus solution of Type IIB supergravity found in hep-th/0304129. The dual field theory is N=4 SYM theory on two half-spaces separated by a planar interface with different coupling constants in each half-space. We assume that the position dependent coupling multiplies the operator L' which…
▽ More
We propose and study a specific gauge theory dual of the smooth, non-supersymmetric (and apparently stable) Janus solution of Type IIB supergravity found in hep-th/0304129. The dual field theory is N=4 SYM theory on two half-spaces separated by a planar interface with different coupling constants in each half-space. We assume that the position dependent coupling multiplies the operator L' which is the fourth descendent of the primary Tr(X^I X^J) and closely related to the N=4 Lagrangian density. At the classical level supersymmetry is broken explicitly, but SO(3,2) conformal symmetry is preserved. We use conformal perturbation theory to study various correlation functions to first and second order in the discontinuity of g^2_{YM}, confirming quantum level conformal symmetry. Certain quantities such as the vacuum expectation value <L'> are protected to all orders in g^2_{YM}N, and we find perfect agreement between the weak coupling value in the gauge theory and the strong coupling gravity result. SO(3,2) symmetry requires vanishing vacuum energy, <T_{μν}>=0, and this is confirmed in first order in the discontinuity.
△ Less
Submitted 28 December, 2004; v1 submitted 9 July, 2004;
originally announced July 2004.
