-
Local structure, thermodynamics, and melting curve of boron phosphide at high pressures by deep learning-driven ab initio simulations
Authors:
N. M. Chtchelkatchev,
R. E. Ryltsev,
M. V. Magnitskaya,
S. M. Gorbunov,
K. A. Cherednichenko,
V. L. Solozhenko,
V. V. Brazhkin
Abstract:
Boron phosphide (BP) is a (super)hard semiconductor constituted of light elements, which is promising for high demand applications at extreme conditions. The behavior of BP at high temperatures and pressures is of special interest but is also poorly understood because both experimental and conventional ab initio methods are restricted to studying refractory covalent materials. The use of machine l…
▽ More
Boron phosphide (BP) is a (super)hard semiconductor constituted of light elements, which is promising for high demand applications at extreme conditions. The behavior of BP at high temperatures and pressures is of special interest but is also poorly understood because both experimental and conventional ab initio methods are restricted to studying refractory covalent materials. The use of machine learning interatomic potentials is a revolutionary trend that gives a unique opportunity for high-temperature study of materials with ab initio accuracy. We develop a deep machine learning potential (DP) for accurate atomistic simulations of solid and liquid phases of BP as well as their transformations near the melting line. Our DP provides quantitative agreement with experimental and ab initio molecular dynamics data for structural and dynamic properties. DP-based simulations reveal that at ambient pressure tetrahedrally bonded cubic BP crystal melts into an open structure consisting of two interpenetrating sub-networks of boron and phosphorous with different structures. Structure transformations of BP melts under compressing are reflected by the evolution of low-pressure tetrahedral coordination to high-pressure octahedral coordination. The main contributions to structural changes at low pressures are made by the evolution of medium-range order in B-subnetwork and at high pressures by the change of short-range order in P-sub-network. Such transformations exhibit an anomalous behavior of structural characteristics in the range of 12--15 GPa. Analysis of the results obtained raise open issues in developing machine learning potentials for covalent materials and stimulate further experimental and theoretical studies of melting behavior in BP.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Tricarbon: two novel ultra-hard metallic carbon allotropes from first-principle calculations
Authors:
Samir F. Matar,
Jean Etourneau,
Vladimir L. Solozhenko
Abstract:
Based on crystal chemistry considerations and quantum density functional theory ground state calculations, rhombohedral rh-C3 and hexagonal h-C6 carbon allotropes are proposed and energetically calculated as new stable ultra-hard phases likewise lonsdaleite. Along the two kinds of carbon in linear C2-C1-C2 lattice, distorted tetrahedra C2(sp3) with an angle of 106.17° (smaller than ideal 109.4°) a…
▽ More
Based on crystal chemistry considerations and quantum density functional theory ground state calculations, rhombohedral rh-C3 and hexagonal h-C6 carbon allotropes are proposed and energetically calculated as new stable ultra-hard phases likewise lonsdaleite. Along the two kinds of carbon in linear C2-C1-C2 lattice, distorted tetrahedra C2(sp3) with an angle of 106.17° (smaller than ideal 109.4°) and C1(sp)-like hybridizations are inferred from charge density projections. The calculated elastic constants point to a strong anisotropy of mechanical properties of rh-C3 and h-C6 with an exceptionally large C33 values (1636 GPa and 1610 GPa, respectively), exceeding that of lonsdaleite (1380 GPa), due to the presence of aligned tricarbon units along the hexagonal c-axis. Both phases are characterized by large bulk moduli and high hardness values that are slightly less than those of lonsdaleite and diamond. Weak metallic behavior of both new phases is identified from electronic band structure calculations.
△ Less
Submitted 12 June, 2021;
originally announced June 2021.
-
Equations of state of new boron-rich selenides B$_6$Se and B$_{12}$Se
Authors:
Kirill A. Cherednichenko,
Yann Le Godec,
Vladimir L. Solozhenko
Abstract:
Two novel of boron-rich selenides, orthorhombic B$_6$Se and rhombohedral B$_{12}$Se, have been recently synthesized at high pressure - high temperature conditions. Room-temperature compressibilities of these phases were studied in a diamond anvil cell using synchrotron powder X-ray diffraction. A fit of experimental p-V data by third-order Birch-Murnaghan equation of state yielded the bulk moduli…
▽ More
Two novel of boron-rich selenides, orthorhombic B$_6$Se and rhombohedral B$_{12}$Se, have been recently synthesized at high pressure - high temperature conditions. Room-temperature compressibilities of these phases were studied in a diamond anvil cell using synchrotron powder X-ray diffraction. A fit of experimental p-V data by third-order Birch-Murnaghan equation of state yielded the bulk moduli of 155(2) GPa for B$_{12}$Se and 144(3) GPa for B$_6$Se. No pressure-induced phase transitions have been observed in the studied pressure range, i.e., up to 35 GPa.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
High-pressure synthesis of boron-rich chalcogenides B12S and B12Se
Authors:
Kirill A. Cherednichenko,
Vladimir A. Mukhanov,
Aleksandr Kalinko,
Vladimir L. Solozhenko
Abstract:
Two boron-rich chalcogenides B12S and B12Se isostructural to α-rhombohedral boron were synthesized by chemical reaction of the elements at high-pressure - high-temperature conditions. The crystal structures and stoichiometries of both compounds were confirmed by Rietveld refinement and elemental analysis. The experimental Raman spectra of B12S and B12Se were investigated for the first time. All ob…
▽ More
Two boron-rich chalcogenides B12S and B12Se isostructural to α-rhombohedral boron were synthesized by chemical reaction of the elements at high-pressure - high-temperature conditions. The crystal structures and stoichiometries of both compounds were confirmed by Rietveld refinement and elemental analysis. The experimental Raman spectra of B12S and B12Se were investigated for the first time. All observed Raman bands have been attributed to the theoretically calculated phonon modes, and the mode assignment has been performed.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
Crystal chemistry and ab initio investigations of ultra-hard dense rhombohedral carbon and boron nitride
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
Rhombohedral dense forms of carbon, rh-C2 (or hexagonal h-C6), and boron nitride, rh-BN (or hexagonal h-B3N3), are derived from rhombohedral 3R graphite based on original crystal chemistry scheme backed with full cell geometry optimization to minimal energy ground state computations within the quantum density functional theory. Considering throughout hexagonal settings featuring extended lattices,…
▽ More
Rhombohedral dense forms of carbon, rh-C2 (or hexagonal h-C6), and boron nitride, rh-BN (or hexagonal h-B3N3), are derived from rhombohedral 3R graphite based on original crystal chemistry scheme backed with full cell geometry optimization to minimal energy ground state computations within the quantum density functional theory. Considering throughout hexagonal settings featuring extended lattices, the calculation of the hexagonal set of elastic constants, provide results of large bulk moduli i.e. B0(rh-C2) = 438 GPa close to that of diamond, and B0(rh-BN) = 369 GPa close to that of cubic BN. The hardness assessment in the framework of three contemporary models enables both phases to be considered as ultra-hard. From the electronic band structures calculated in the hexagonal Brillouin zones, 3R graphite is a small-gap semiconductor, oppositely to rh-C2 that is characterized by a large band gap close to 5 eV, as well as the two BN phases.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
Ultra-hard rhombohedral carbon from crystal chemistry rationale and first principles
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
A new ultra-hard rhombohedral carbon rh-C4 (or hexagonal h-C12) is reported as derived from 3R graphite through crystal chemistry construction and ground state energy within the density functional theory. An extended hexagonal three-dimensional network of h-C12 is formed of C4 tetrahedra alike in h-C4 lonsdaleite (hexagonal diamond). The electronic band structure of rh-C4 is characteristic of insu…
▽ More
A new ultra-hard rhombohedral carbon rh-C4 (or hexagonal h-C12) is reported as derived from 3R graphite through crystal chemistry construction and ground state energy within the density functional theory. An extended hexagonal three-dimensional network of h-C12 is formed of C4 tetrahedra alike in h-C4 lonsdaleite (hexagonal diamond). The electronic band structure of rh-C4 is characteristic of insulator with Egap = 4 eV similarly to diamond. From the set of elastic constants a larger value of bulk modulus versus lonsdaleite, and the largest Vickers hardness (HV) versus both forms of diamond were derived.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Crystal chemistry and ab initio prediction of ultra-hard rhombohedral B2N2 and BC2N
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
New ultra-hard rhombohedral B2N2 and BC2N - or hexagonal B6N6 and B3C6N3 - are derived from 3R graphite based on crystal chemistry rationale schematizing a mechanism for 2D => 3D transformation. Full unconstrained geometry optimizations leading to ground state energy structures and energy derived quantities as energy-volume equation of states (EOS) were based on computations within the density fun…
▽ More
New ultra-hard rhombohedral B2N2 and BC2N - or hexagonal B6N6 and B3C6N3 - are derived from 3R graphite based on crystal chemistry rationale schematizing a mechanism for 2D => 3D transformation. Full unconstrained geometry optimizations leading to ground state energy structures and energy derived quantities as energy-volume equation of states (EOS) were based on computations within the density functional theory (DFT) with generalized gradient approximation (GGA) for exchange-correlation (XC) effects. The new binary and ternary phases are characterized by tetrahedral stacking alike diamond, visualized with charge density representations, and illustrating ion characters. Atom averaged total energies are similar between cubic BN and rh-B2N2 on one hand, and larger stabilization of rhombohedral BC2N versus cubic and orthorhombic forms (in literature assessed from favored C-C and B-N bonding), on the other hand. The electronic band structures are characteristic of insulators with Egap ~ 5 eV. Both phases are characterized by large bulk and shear moduli and very high hardness values i.e. HV(rh-B2N2) = 74 GPa and HV(rh-BC2N) = 87 GPa.
△ Less
Submitted 11 March, 2021;
originally announced March 2021.
-
Heat capacities of nanostructured wurtzite and rock salt ZnO: challenges of ZnO nano-phase diagram
Authors:
Konstantin V. Kamenev,
Alexandre Courac,
Petr S. Sokolov,
Andrei N. Baranov,
Felix Yu. Sharikov,
Vladimir L. Solozhenko
Abstract:
Low-temperature heat capacities (Cp) of nanostructured rock salt (rs-ZnO) and wurtzite (w-ZnO) polymorphs of zinc oxide were measured in the 2-315 K temperature range. No significant influence of nanostructuring on Cp of w-ZnO has been observed. The measured Cp of rock salt ZnO is lower than that of wurtzite ZnO below 100 K and is higher above this temperature. Using available thermodynamic data,…
▽ More
Low-temperature heat capacities (Cp) of nanostructured rock salt (rs-ZnO) and wurtzite (w-ZnO) polymorphs of zinc oxide were measured in the 2-315 K temperature range. No significant influence of nanostructuring on Cp of w-ZnO has been observed. The measured Cp of rock salt ZnO is lower than that of wurtzite ZnO below 100 K and is higher above this temperature. Using available thermodynamic data, we established that the equilibrium pressure between nanocrystalline w-ZnO and rs-ZnO is close to 4.6 GPa at 300 K (half as much as the onset pressure of direct phase transformation) and slightly changes with temperature up to 1000 K.
△ Less
Submitted 14 January, 2021;
originally announced January 2021.
-
The effect of doping on the lattice parameter and properties of cubic boron nitride
Authors:
Vladimir A. Mukhanov,
Alexandre Courac,
Vladimir L. Solozhenko
Abstract:
The effect of doping of cubic boron nitride with beryllium, silicon, sulfur and magnesium on the lattice parameters, electrical conductivity and EPR spectra has been studied. It is established that the degree of doping increases significantly in the case of crystallization of cubic boron nitride from BN solutions in supercritical ammonia at 3.9-4.2 GPa and 1100°C in comparison with the conventiona…
▽ More
The effect of doping of cubic boron nitride with beryllium, silicon, sulfur and magnesium on the lattice parameters, electrical conductivity and EPR spectra has been studied. It is established that the degree of doping increases significantly in the case of crystallization of cubic boron nitride from BN solutions in supercritical ammonia at 3.9-4.2 GPa and 1100°C in comparison with the conventional synthesis from melts of the Mg-B-N system at 4.2 GPa and 1400°C. Doping with silicon and beryllium results in semiconductor properties of cubic boron nitride.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
First-principles studies of the electronic and magnetic structures and bonding properties of boron subnitride B$_{13}$N$_2$
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
Rhombohedral B$_{12}$ unit is viewed as a host matrix embedding linear tri-atomic arrangements of elements (E) resulting in a relatively large family of boron-rich compounds with B$_{12}${E-E-E} generic formulation. The present work focuses on boron subnitride, B$_{13}$N$_2$ that we express in present context as B$_{12}${N-B-N}. Within well established quantum density functional theory (DFT) a ful…
▽ More
Rhombohedral B$_{12}$ unit is viewed as a host matrix embedding linear tri-atomic arrangements of elements (E) resulting in a relatively large family of boron-rich compounds with B$_{12}${E-E-E} generic formulation. The present work focuses on boron subnitride, B$_{13}$N$_2$ that we express in present context as B$_{12}${N-B-N}. Within well established quantum density functional theory (DFT) a full study of its electronic properties is provided. Also linear triatomic arrangements in view of the existence in simple compounds such as sodium azide NaN$_3$, i.e., Na$^I${N-N-N} and calcium cyanamide, Ca$^{II}${N-C-N}, we devised Sc$^{III}${N-B-N} to establish comparison with B$_{12}${N-B-N}. ScBN$_2$ is calculated to be cohesive and possessing N-B-N isolated from ScIII with dB-N = 1.33 Å. In B$_{12}${N-B-N} an elongated dB-N=1.43 Å is identified due to the bonding of N with one of the two B12 boron substructures, B1 with the formation of "3B...N-B-N...3B"-like complex accompanied by a magnetic instability. Spin polarized (SP) calculations led to the onset of magnetization on central boron with M=1 $μ_B$ in a stable half-ferromagnetic ground state observed from the electronic density of states (DOS). The results are backed with total energy and calculations in both non-spin-polarized (NSP) and spin-polarized stabilizing the latter configuration over a broad range of volumes from M(V) plots. Further illustrative results are given with the charge densities (total and magnetic) and electron localization function (ELF).
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Melting and decomposition of orthorhombic B6Si under high pressure
Authors:
Vladimir L. Solozhenko,
Vladimir A. Mukhanov,
Vadim V. Brazhkin
Abstract:
Melting of orthorhombic boron silicide B6Si has been studied at pressures up to 8 GPa using in situ electrical resistivity measurements and quenching. It has been found that in the 2.6-7.7 GPa range B6Si melts congruently, and the melting curve exhibits negative slope of -31(2) K/GPa that points to a higher density of the melt as compared to the solid phase. At very high temperatures B6Si melt app…
▽ More
Melting of orthorhombic boron silicide B6Si has been studied at pressures up to 8 GPa using in situ electrical resistivity measurements and quenching. It has been found that in the 2.6-7.7 GPa range B6Si melts congruently, and the melting curve exhibits negative slope of -31(2) K/GPa that points to a higher density of the melt as compared to the solid phase. At very high temperatures B6Si melt appears to be unstable and undergoes disproportionation into silicon and boron-rich silicides. The onset temperature of disproportionation strongly depends on pressure, and the corresponding low-temperature boundary exhibits negative slope of -92(3) K/GPa which is indicative of significant volume decrease in the course of B6Si melt decomposition.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
A hunt for ultrahard materials
Authors:
Vladimir L. Solozhenko,
Yann Le Godec
Abstract:
Recent results on search (theoretical prediction, high-pressure synthesis, etc.) for novel superhard and ultrahard materials are briefly reviewed.
Recent results on search (theoretical prediction, high-pressure synthesis, etc.) for novel superhard and ultrahard materials are briefly reviewed.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Discovery of new boron-rich chalcogenides: orthorhombic B6X (X = S, Se)
Authors:
Kirill A. Cherednichenko,
Vladimir A. Mukhanov,
Zhenhai Wang,
Artem R. Oganov,
Aleksandr Kalinko,
Iurii Dovgaliuk,
Vladimir L. Solozhenko
Abstract:
New boron-rich sulfide B6S and selenide B6Se have been discovered from high pressure - high temperature synthesis combined with ab initio evolutionary crystal structure prediction, and studied by synchrotron X-ray diffraction and Raman spectroscopy at ambient conditions. As it follows from Rietveld refinement of powder X-ray diffraction data, both chalcogenides have orthorhombic symmetry and belon…
▽ More
New boron-rich sulfide B6S and selenide B6Se have been discovered from high pressure - high temperature synthesis combined with ab initio evolutionary crystal structure prediction, and studied by synchrotron X-ray diffraction and Raman spectroscopy at ambient conditions. As it follows from Rietveld refinement of powder X-ray diffraction data, both chalcogenides have orthorhombic symmetry and belongs to Pmna space group. All experimentally observed Raman bands have been attributed to the theoretically calculated phonon modes, and the mode assignment has been performed. Prediction of mechanical properties (hardness and elastic moduli) of new boron-rich chalcogenides have been made using ab initio routines, and both compounds were found to be members of a family of hard phases (Hv ~ 31 GPa).
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
Thermoelastic equation of state and melting of Mg metal at high pressure and high temperature
Authors:
Alexandre Courac,
Yann Le Godec,
Vladimir L. Solozhenko,
Nicolas Guignot,
Wilson A. Crichton
Abstract:
The p-V-T equation of state of magnesium metal has been measured up to 20 GPa and 1500 K using both multianvil and opposite anvil techniques combined with synchrotron X-ray diffraction. To fit the experimental data, the model of Anderson-Grüneisen has been used with fixed parameter δT. The 300-K bulk modulus of B0 = 32.5(1) GPa and its first pressure derivative, B0' = 3.73(2), have been obtained b…
▽ More
The p-V-T equation of state of magnesium metal has been measured up to 20 GPa and 1500 K using both multianvil and opposite anvil techniques combined with synchrotron X-ray diffraction. To fit the experimental data, the model of Anderson-Grüneisen has been used with fixed parameter δT. The 300-K bulk modulus of B0 = 32.5(1) GPa and its first pressure derivative, B0' = 3.73(2), have been obtained by fitting available data up to 20 GPa to Murnaghan equation of state. Thermal expansion at ambient pressure has been described using second order polynomial with coefficients a = 25(2)x10-6 K-1 and b = 9.4(4)x10-9 K-2. The parameter describing simultaneous pressure and temperature impact on thermal expansion coefficient (and, therefore, volume) is δT = 1.5(5). The good agreement between fitted and experimental isobars has been achieved to relative volumes of 0.75. The Mg melting observed by X-ray diffraction and in situ electrical resistivity measurements confirms previous results and additionally confirms the p-T estimations in the vicinity of melting.
△ Less
Submitted 2 September, 2019;
originally announced September 2019.
-
Thermal expansion of α-boron and some boron-rich pnictides
Authors:
Kirill A. Cherednichenko,
Vladimir L. Solozhenko
Abstract:
Thermal expansion of α-rhombohedral boron (α-B12) and two isostructural boron-rich pnictides (B12P2 and B12As2) has been studied between 298 and 1280 K by high-temperature synchrotron X-ray diffraction. For all studied phases no temperature-induced phase transitions have been observed. The observed temperature dependencies of the lattice parameters and unit cell volumes were found to be quasi-line…
▽ More
Thermal expansion of α-rhombohedral boron (α-B12) and two isostructural boron-rich pnictides (B12P2 and B12As2) has been studied between 298 and 1280 K by high-temperature synchrotron X-ray diffraction. For all studied phases no temperature-induced phase transitions have been observed. The observed temperature dependencies of the lattice parameters and unit cell volumes were found to be quasi-linear. Variation of the thermal expansion coefficients in the group of boron-rich pnictides (B13N2 - B12P2 - B12As2) was analyzed.
△ Less
Submitted 6 July, 2019;
originally announced July 2019.
-
Mechanical properties of ultra-hard nanocrystalline cubic boron nitride
Authors:
Vladimir L. Solozhenko,
Volodymyr Bushlya,
Jinming Zhou
Abstract:
Nanostructure and mechanical properties of bulk nanocristalline cubic boron nitride have been studied by transmission electron microscopy, and micro- and nanoindentation. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that nano-cBN belongs to a family of advanced ultra-hard materials.
Nanostructure and mechanical properties of bulk nanocristalline cubic boron nitride have been studied by transmission electron microscopy, and micro- and nanoindentation. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that nano-cBN belongs to a family of advanced ultra-hard materials.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
High-pressure synthesis of superhard and ultrahard materials
Authors:
Yann Le Godec,
Alexandre Courac,
Vladimir L. Solozhenko
Abstract:
A brief overview on high-pressure synthesis of superhard and ultrahard materials is presented in this tutorial paper. Modern high-pressure chemistry represents a vast exciting area of research which can lead to new industrially important materials with exceptional mechanical properties. This field is only just beginning to realize its huge potential, and the image of "terra incognita" is not misus…
▽ More
A brief overview on high-pressure synthesis of superhard and ultrahard materials is presented in this tutorial paper. Modern high-pressure chemistry represents a vast exciting area of research which can lead to new industrially important materials with exceptional mechanical properties. This field is only just beginning to realize its huge potential, and the image of "terra incognita" is not misused. We focus on three facets of this expanding research field by detailing: (i) the most promising chemical systems to explore (i.e. "where to search"); (ii) the various methodological strategies for exploring these systems (i.e. "how to explore"); (iii) the technological and conceptual tools to study the latter (i.e. "the research tools"). These three aspects that are crucial in this research are illustrated by examples of the recent results on high pressure - high temperature synthesis of novel super- and ultrahard phases (orthorhombic gamma-B28, diamond-like BC5, rhombohedral B13N2 and cubic ternary B-C-N phases). Finally, some perspectives of this research area are briefly reviewed.
△ Less
Submitted 5 October, 2019; v1 submitted 1 April, 2019;
originally announced April 2019.
-
Nanotwinning in boron subphosphide B12P2
Authors:
Boris A. Kulnitskiy,
Igor A. Perezhogin,
Vladimir D. Blank,
Vladimir A. Mukhanov,
Vladimir L. Solozhenko
Abstract:
Microstructure of boron subphosphide B12P2 produced by self-propagated high-temperature synthesis has been studied by high-resolution transmission electron microscopy. Two systems of twins have been found i.e. conventional twins on the (0003)h plane and nanotwins resulting from duplication of the rhombohedral unit cell of B12P2 along one of the basic vectors.
Microstructure of boron subphosphide B12P2 produced by self-propagated high-temperature synthesis has been studied by high-resolution transmission electron microscopy. Two systems of twins have been found i.e. conventional twins on the (0003)h plane and nanotwins resulting from duplication of the rhombohedral unit cell of B12P2 along one of the basic vectors.
△ Less
Submitted 6 February, 2019;
originally announced February 2019.
-
Mechanical properties of boron phosphides
Authors:
Vladimir L. Solozhenko,
Volodymyr Bushlya
Abstract:
Microstructure and mechanical properties of bulk polycristalline boron phosphides (cubic BP and rhombohedral B12P2) have been studied by scanning electron microscopy and micro- and nanoindentation. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that both phosphides belong to a family of hard phases and can be considered as prospective binders for diamond…
▽ More
Microstructure and mechanical properties of bulk polycristalline boron phosphides (cubic BP and rhombohedral B12P2) have been studied by scanning electron microscopy and micro- and nanoindentation. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that both phosphides belong to a family of hard phases and can be considered as prospective binders for diamond and cubic boron nitride.
△ Less
Submitted 28 February, 2019; v1 submitted 17 January, 2019;
originally announced January 2019.
-
Myths about new ultrahard phases: Why materials that are significantly superior to diamond in elastic moduli and hardness are impossible?
Authors:
Vadim V. Brazhkin,
Vladimir L. Solozhenko
Abstract:
Reports published in the last 25 years on the synthesis of carbon-based materials significantly superior to diamond in hardness and elastic properties have been critically examined, and three groups of recently appearing myths have been analyzed. The first group concerns the possibility of producing materials with bulk moduli much higher than that of diamond. The second group regards to "experimen…
▽ More
Reports published in the last 25 years on the synthesis of carbon-based materials significantly superior to diamond in hardness and elastic properties have been critically examined, and three groups of recently appearing myths have been analyzed. The first group concerns the possibility of producing materials with bulk moduli much higher than that of diamond. The second group regards to "experimentally measured" hardness significantly higher than that of diamond. Myths of the third group state that quantum confinement effects supposedly provide "theoretical" foundations for a several-fold (!) increase in the hardness of covalent materials. The fundamental impossibility of synthesizing materials with elastic moduli noticeably exceeding the diamond value under normal conditions has been demonstrated. The problems of hardness measuring have been discussed; it was shown that the formation of obstacles for motion of dislocations can allow increasing the measured hardness of superhard materials by 20-40%. It was demonstrated that other hypothetical ways for hardness increase, e.g. owing to quantum confinement have no any real physical grounds. The superior mechanical properties of diamond are due to reliably established physical laws. Accordingly, any statements on the possibility of obtaining materials with elastic characteristics and/or hardness several times higher than the corresponding values for diamond cannot be considered as scientifically reliable.
△ Less
Submitted 22 January, 2019; v1 submitted 23 November, 2018;
originally announced November 2018.
-
Equation of state of boron subarsenide B12As2 to 47 GPa
Authors:
Kirill A. Cherednichenko,
Yann Le Godec,
Vladimir L. Solozhenko
Abstract:
Compressibility of boron subarsenide B12As2 has been studied by synchrotron X-ray diffraction up to 47 GPa at room temperature in a diamond anvil cell using Ne pressure transmitting medium. A fit of experimental p-V data by Vinet equation of state yielded the bulk modulus of 150(4) GPa and its first pressure derivative of 6.4(3). No pressure-induced phase transitions have been observed.
Compressibility of boron subarsenide B12As2 has been studied by synchrotron X-ray diffraction up to 47 GPa at room temperature in a diamond anvil cell using Ne pressure transmitting medium. A fit of experimental p-V data by Vinet equation of state yielded the bulk modulus of 150(4) GPa and its first pressure derivative of 6.4(3). No pressure-induced phase transitions have been observed.
△ Less
Submitted 20 April, 2018; v1 submitted 26 March, 2018;
originally announced March 2018.
-
Boron monosulfide: equation of state and pressure-induced phase transition
Authors:
Kirill A. Cherednichenko,
Ivan A. Kruglov,
Artem R. Oganov,
Yann Le Godec,
Mohamed Mezouar,
Vladimir L. Solozhenko
Abstract:
Quasi-hydrostatic compression of rhombohedral boron monosulfide (r-BS) has been studied up to 50 GPa at room temperature using diamond-anvil cells and angle-dispersive synchrotron X-ray diffraction. A fit of the experimental P-V data to the Vinet equation of state yields bulk modulus of 42.2(1.4) GPa and its first pressure derivative of 7.6(2) that are in excellent agreement with our ab initio cal…
▽ More
Quasi-hydrostatic compression of rhombohedral boron monosulfide (r-BS) has been studied up to 50 GPa at room temperature using diamond-anvil cells and angle-dispersive synchrotron X-ray diffraction. A fit of the experimental P-V data to the Vinet equation of state yields bulk modulus of 42.2(1.4) GPa and its first pressure derivative of 7.6(2) that are in excellent agreement with our ab initio calculations. Formation of a new high-pressure phase of boron monosulfide (hp-BS) has been observed above 35 GPa. According to ab initio evolutionary crystal structure predictions combined with Rietveld refinement of high-pressure X-ray diffraction data, the structure of hp-BS has trigonal symmetry and belongs to the space group P-3m1. As it follows from electron density of states calculations, the phase transformation is accompanied by an insulator-metal transition.
△ Less
Submitted 20 January, 2018;
originally announced January 2018.
-
Phase diagram of the B-BN system at pressures up to 24 GPa: Experimental study and thermodynamic analysis
Authors:
Vladimir L. Solozhenko,
Vladimir Z. Turkevich
Abstract:
Phase relations in the B-BN system have been studied ex situ and in situ at pressures 2-20 GPa and temperatures up to 2800 K. The evolution of topology of the B-BN phase diagram has been investigated up to 24 GPa using models of phenomenological thermodynamics with interaction parameters derived from our experimental data on phase equilibria at high pressures and high temperatures. There are two t…
▽ More
Phase relations in the B-BN system have been studied ex situ and in situ at pressures 2-20 GPa and temperatures up to 2800 K. The evolution of topology of the B-BN phase diagram has been investigated up to 24 GPa using models of phenomenological thermodynamics with interaction parameters derived from our experimental data on phase equilibria at high pressures and high temperatures. There are two thermodynamically stable boron subnitrides in the system i.e. B13N2 and B50N2. Above 16.5 GPa the B50N2 = L + B13N2 peritectic reaction transforms to the solid-phase reaction of B50N2 decomposition into tetragonal boron (t'-B52) and B13N2, while the incongruent type of B13N2 melting changes to the congruent type only above 23.5 GPa. The constructed phase diagram provides fundamentals for directed high-pressure synthesis of superhard phases in the B-BN system.
△ Less
Submitted 3 April, 2018; v1 submitted 1 January, 2018;
originally announced January 2018.
-
Thermal expansion of boron subnitrides
Authors:
Kirill A. Cherednichenko,
Lara Gigli,
Vladimir L. Solozhenko
Abstract:
The lattice parameters of two boron subnitrides, B13N2 and B50N2, have been measured as a function of temperature between 298 and 1273 K, and the corresponding thermal expansion coefficients have been determined. Thermal expansion of both boron subnitrides was found to be quasi-linear, and the volume thermal expansion coefficients of B50N2 (15.7(2) 10-6 K-1) and B13N2 (21.3(2) 10-6 K-1) are of the…
▽ More
The lattice parameters of two boron subnitrides, B13N2 and B50N2, have been measured as a function of temperature between 298 and 1273 K, and the corresponding thermal expansion coefficients have been determined. Thermal expansion of both boron subnitrides was found to be quasi-linear, and the volume thermal expansion coefficients of B50N2 (15.7(2) 10-6 K-1) and B13N2 (21.3(2) 10-6 K-1) are of the same order of magnitude as those of boron-rich compounds with structure related to α-rhombohedral boron. For both boron subnitrides no temperature-induced phase transitions have been observed in the temperature range under study.
△ Less
Submitted 15 March, 2018; v1 submitted 28 December, 2017;
originally announced December 2017.
-
Mechanical properties of superhard boron subnitride B13N2
Authors:
Vladimir L. Solozhenko,
Volodymyr Bushlya
Abstract:
Microstructure and mechanical properties of bulk polycristalline rhombohedral boron subnitride B13N2 synthesized by crystallization from the B-BN melt at 7 GPa have been systematically studied by micro- and nanoindentation, atomic force microscopy and scanning electron microscopy. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that B13N2 belongs to a fami…
▽ More
Microstructure and mechanical properties of bulk polycristalline rhombohedral boron subnitride B13N2 synthesized by crystallization from the B-BN melt at 7 GPa have been systematically studied by micro- and nanoindentation, atomic force microscopy and scanning electron microscopy. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that B13N2 belongs to a family of superhard phases and can be considered as a promising superabrasive or binder for cubic boron nitride.
△ Less
Submitted 15 October, 2017; v1 submitted 4 October, 2017;
originally announced October 2017.
-
Structure and equation of state of tetragonal boron subnitride B50N2
Authors:
Kirill A. Cherednichenko,
Vladimir L. Solozhenko
Abstract:
New boron subnitride B50N2 has been synthesized by crystallization from the B-BN melt at 5 GPa, and its structure has been refined using Rietveld analysis. B50N2 crystallizes in the tetragonal space group P-4n2 with unit cell parameters a = 8.8181(2) A and c = 5.0427(10) A. Quasi-hydrostatic compression of two boron subnitrides, B50N2 and B13N2, has been studied to 30 GPa at room temperature in a…
▽ More
New boron subnitride B50N2 has been synthesized by crystallization from the B-BN melt at 5 GPa, and its structure has been refined using Rietveld analysis. B50N2 crystallizes in the tetragonal space group P-4n2 with unit cell parameters a = 8.8181(2) A and c = 5.0427(10) A. Quasi-hydrostatic compression of two boron subnitrides, B50N2 and B13N2, has been studied to 30 GPa at room temperature in a diamond-anvil cell using synchrotron X-ray diffraction. No pressure-induced phase transitions have been observed. A fit of experimental p-V data to the Murnaghan equation of state yielded B50N2 and B13N2 bulk moduli of 167(2) and 205(2) GPa, respectively, with fixed first bulk modulus pressure derivative of 4.0.
△ Less
Submitted 4 September, 2017;
originally announced September 2017.
-
On the thermodynamic aspect of zinc oxide polymorphism. Calorimetric study of metastable rock salt ZnO
Authors:
Felix Yu. Sharikov,
Petr S. Sokolov,
Andrey N. Baranov,
Vladimir L. Solozhenko
Abstract:
The enthalpies of dissolution of metastable rock salt and thermodynamically stable wurtzite polymorphs of zinc oxide in aqueous H2SO4 have been measured in direct calorimetric experiments at 303 K and 0.1 MPa and the obtained results enabled determination of the standard enthalpy of the rock salt-to-wurtzite phase transition in ZnO, ΔtrH = -11.7+/-0.3 kJ/mol.
The enthalpies of dissolution of metastable rock salt and thermodynamically stable wurtzite polymorphs of zinc oxide in aqueous H2SO4 have been measured in direct calorimetric experiments at 303 K and 0.1 MPa and the obtained results enabled determination of the standard enthalpy of the rock salt-to-wurtzite phase transition in ZnO, ΔtrH = -11.7+/-0.3 kJ/mol.
△ Less
Submitted 11 June, 2017;
originally announced June 2017.
-
On melting of boron subnitride B13N2 under pressure
Authors:
Vladimir L. Solozhenko,
Vladimir A. Mukhanov
Abstract:
Melting of rhombohedral boron subnitride B13N2 has been studied in situ at pressures to 8 GPa using synchrotron X-ray diffraction and electrical resistivity measurements. It has been found that above 2.6 GPa B13N2 melts incongruently, and the melting curve exhibits positive slope of 31(3) K/GPa that points to a lower density of the melt as compared to the solid phase.
Melting of rhombohedral boron subnitride B13N2 has been studied in situ at pressures to 8 GPa using synchrotron X-ray diffraction and electrical resistivity measurements. It has been found that above 2.6 GPa B13N2 melts incongruently, and the melting curve exhibits positive slope of 31(3) K/GPa that points to a lower density of the melt as compared to the solid phase.
△ Less
Submitted 1 May, 2017;
originally announced May 2017.
-
Thermoelastic equation of state of boron subphosphide B12P2
Authors:
Vladimir L. Solozhenko,
Kirill A. Cherednichenko,
Oleksandr O. Kurakevych
Abstract:
Compressibility of boron subphosphide B12P2 has been studied under quasi-hydrostatic conditions up to 26 GPa and 2600 K using laser-heated diamond anvil cell and angle-dispersive synchrotron X-ray diffraction. 300-K data fit yields the values of bulk modulus B0 = 192(11) GPa and its first pressure derivative B0' = 5.5(12). At ambient pressure the thermal expansion is quasi-linear up to 1300 K with…
▽ More
Compressibility of boron subphosphide B12P2 has been studied under quasi-hydrostatic conditions up to 26 GPa and 2600 K using laser-heated diamond anvil cell and angle-dispersive synchrotron X-ray diffraction. 300-K data fit yields the values of bulk modulus B0 = 192(11) GPa and its first pressure derivative B0' = 5.5(12). At ambient pressure the thermal expansion is quasi-linear up to 1300 K with average volume expansion coefficient α = 17.4(1) 10-6 K-1. The whole set of experimental p-V-T data is well described by the Anderson-Grüneisen model with δT = 6.
△ Less
Submitted 27 January, 2017; v1 submitted 16 December, 2016;
originally announced December 2016.
-
Orthorhombic boron oxide under pressure: in situ study by X-ray diffraction and Raman scattering
Authors:
Kirill A. Cherednichenko,
Yann Le Godec,
Aleksandr Kalinko,
Mohamed Mezouar,
Vladimir L. Solozhenko
Abstract:
High-pressure phase of boron oxide, orthorhombic \b{eta}-B2O3, has been studied in situ by synchrotron X-ray diffraction to 22 GPa and Raman scattering to 46 GPa at room temperature. The bulk modulus of \b{eta}-B2O3 has been found to be 169(3) GPa that is in good agreement with our ab initio calculations. Raman and IR spectra of \b{eta}-B2O3 have been measured at ambient pressure, all experimental…
▽ More
High-pressure phase of boron oxide, orthorhombic \b{eta}-B2O3, has been studied in situ by synchrotron X-ray diffraction to 22 GPa and Raman scattering to 46 GPa at room temperature. The bulk modulus of \b{eta}-B2O3 has been found to be 169(3) GPa that is in good agreement with our ab initio calculations. Raman and IR spectra of \b{eta}-B2O3 have been measured at ambient pressure, all experimentally observed bands have been attributed to the theoretically calculated ones, and the mode assignment has been performed. Based on the data on Raman shift as a function of pressure, combined with equation-of-state data, the Grüneisen parameters of all experimentally observed Raman bands have been calculated. \b{eta}-B2O3 enriched by 10B isotope has been synthesized, and the effect of boron isotopic substitution on Raman spectra has been studied.
△ Less
Submitted 12 September, 2016;
originally announced September 2016.
-
Phase diagram of the B-B2O3 system at pressures to 24 GPa
Authors:
Vladimir Z. Turkevich,
Dmitry V. Turkevich,
Vladimir L. Solozhenko
Abstract:
The evolution of topology of the B-B2O3 phase diagram has been studied at pressures up to 24 GPa using models of phenomenological thermodynamics with interaction parameters derived from experimental data on phase equilibria at high pressures and high temperatures.
The evolution of topology of the B-B2O3 phase diagram has been studied at pressures up to 24 GPa using models of phenomenological thermodynamics with interaction parameters derived from experimental data on phase equilibria at high pressures and high temperatures.
△ Less
Submitted 22 February, 2016;
originally announced February 2016.
-
On electrical conductivity of melts of boron and its compounds under pressure
Authors:
Vladimir A. Mukhanov,
Vladimir L. Solozhenko
Abstract:
The electrical conductivity of melts of boron and its carbide (B4C), nitride (BN), and phosphide (BP) has been studied at pressures to 7.7 GPa and temperatures to 3500 K. It has been shown that these melts are good conductors with specific electrical conductivity values comparable with that of iron melt at ambient pressure.
The electrical conductivity of melts of boron and its carbide (B4C), nitride (BN), and phosphide (BP) has been studied at pressures to 7.7 GPa and temperatures to 3500 K. It has been shown that these melts are good conductors with specific electrical conductivity values comparable with that of iron melt at ambient pressure.
△ Less
Submitted 13 January, 2016;
originally announced January 2016.
-
Melting of B12P2 boron subphosphide under pressure
Authors:
Vladimir L. Solozhenko,
Vladimir A. Mukhanov,
Petr S. Sokolov,
Yann Le Godec,
Kirill A. Cherednichenko,
Zuzana Konôpková
Abstract:
Melting of boron subphosphide (B12P2) to 26 GPa has been studied by in situ synchrotron X-ray powder diffraction in a laser-heated diamond anvil cell, and by quenching and electrical resistance measurements in a toroid-type high-pressure apparatus. B12P2 melts congruently, and the melting curve has a positive slope of 23(6) K/GPa. No solid-state phase transition was observed up to the melting in t…
▽ More
Melting of boron subphosphide (B12P2) to 26 GPa has been studied by in situ synchrotron X-ray powder diffraction in a laser-heated diamond anvil cell, and by quenching and electrical resistance measurements in a toroid-type high-pressure apparatus. B12P2 melts congruently, and the melting curve has a positive slope of 23(6) K/GPa. No solid-state phase transition was observed up to the melting in the whole pressure range under study.
△ Less
Submitted 12 January, 2016;
originally announced January 2016.
-
On melting of boron phosphide under pressure
Authors:
Vladimir L. Solozhenko,
Vladimir A. Mukhanov
Abstract:
Melting of cubic boron phosphide, BP has been studied at pressures to 9 GPa using synchrotron X-ray diffraction and electrical resistivity measurements. It has been found that above 2.6 GPa BP melts congruently, and the melting curve exhibits negative slope -60(7) K/GPa, which is indicative of a higher density of the melt as compared to the solid phase.
Melting of cubic boron phosphide, BP has been studied at pressures to 9 GPa using synchrotron X-ray diffraction and electrical resistivity measurements. It has been found that above 2.6 GPa BP melts congruently, and the melting curve exhibits negative slope -60(7) K/GPa, which is indicative of a higher density of the melt as compared to the solid phase.
△ Less
Submitted 17 November, 2015;
originally announced November 2015.
-
Novel phase of beryllium fluoride at high pressure
Authors:
Maksim S. Rakitin,
Artem R. Oganov,
Haiyang Niu,
M. Mahdi Davari Esfahani,
Xiang-Feng Zhou,
Guang-Rui Qian,
Vladimir L. Solozhenko
Abstract:
A previously unknown thermodynamically stable high-pressure phase of BeF$_{2}$ has been predicted using the evolutionary algorithm USPEX. This phase occurs in the pressure range 18-27 GPa. Its structure has $C2/c$ space group symmetry and contains 18 atoms in the primitive unit cell. Given the analogy between BeF$_{2}$ and SiO$_{2}$, silica phases have been investigated as well, but the new phase…
▽ More
A previously unknown thermodynamically stable high-pressure phase of BeF$_{2}$ has been predicted using the evolutionary algorithm USPEX. This phase occurs in the pressure range 18-27 GPa. Its structure has $C2/c$ space group symmetry and contains 18 atoms in the primitive unit cell. Given the analogy between BeF$_{2}$ and SiO$_{2}$, silica phases have been investigated as well, but the new phase has not been observed to be thermodynamically stable for this system. However, it is found to be metastable and to have comparable energy to the known metastable phases of SiO$_{2}$, suggesting a possibility of its synthesis.
△ Less
Submitted 11 June, 2015;
originally announced June 2015.
-
Boron phosphide under pressure: in situ study by Raman scattering and X-ray diffraction
Authors:
Vladimir L. Solozhenko,
Oleksandr O. Kurakevych,
Yann Le Godec,
Aleksandr V. Kurnosov,
Artem R. Oganov
Abstract:
Cubic boron phosphide BP has been studied in situ by X-ray diffraction and Raman scattering up to 55 GPa at 300 K in a diamond anvil cell. The bulk modulus of B0 = 174(2) GPa has been established, which is in excellent agreement with our ab initio calculations. The data on Raman shift as a function of pressure, combined with equation-of-state data, allowed us to estimate the Grüneisen parameters o…
▽ More
Cubic boron phosphide BP has been studied in situ by X-ray diffraction and Raman scattering up to 55 GPa at 300 K in a diamond anvil cell. The bulk modulus of B0 = 174(2) GPa has been established, which is in excellent agreement with our ab initio calculations. The data on Raman shift as a function of pressure, combined with equation-of-state data, allowed us to estimate the Grüneisen parameters of the TO and LO modes of zinc-blende structure, γGTO = 1.16 and γGLO = 1.04, just like in the case of other AIIIBV diamond-like phases, for which γGTO > γGLO = 1. We also established that the pressure dependence of the effective electro-optical constant α is responsible for a strong change in relative intensities of the TO and LO modes from ITO/ILO ~0.25 at 0.1 MPa to ITO/ILO ~2.5 at 45 GPa, for which we also find excellent agreement between experiment and theory.
△ Less
Submitted 21 May, 2015;
originally announced May 2015.
-
Phonon study of rhombohedral BS under high pressure
Authors:
Kirill A. Cherednichenko,
Petr S. Sokolov,
Aleksandr Kalinko,
Yann Le Godec,
Alain Polian,
Jean-Paul Itie,
Vladimir L. Solozhenko
Abstract:
Raman spectra of rhombohedral boron monosulfide (r-BS) were measured under pressures up to 34 GPa at room temperature. No pressure-induced structural phase transition was observed, while strong pressure shift of Raman bands towards higher wavenumbers has been revealed. IR spectroscopy as a complementary technique has been used in order to completely describe the phonon modes of r-BS. All experimen…
▽ More
Raman spectra of rhombohedral boron monosulfide (r-BS) were measured under pressures up to 34 GPa at room temperature. No pressure-induced structural phase transition was observed, while strong pressure shift of Raman bands towards higher wavenumbers has been revealed. IR spectroscopy as a complementary technique has been used in order to completely describe the phonon modes of r-BS. All experimentally observed bands have been compared with theoretically calculated ones and modes assignment has been performed. r-BS enriched by 10B isotope was synthesized, and the effect of boron isotopic substitution on Raman spectra was observed and analyzed.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
Thermodynamic calculation of the B-C system at pressures to 24 GPa
Authors:
Vladimir Z. Turkevich,
Vladimir L. Solozhenko
Abstract:
The evolution of topology of the B-C phase diagram has been studied at pressures up to 24 GPa using models of phenomenological thermodynamics with interaction parameters derived from experimental data on phase equilibria at high pressures and high temperatures.
The evolution of topology of the B-C phase diagram has been studied at pressures up to 24 GPa using models of phenomenological thermodynamics with interaction parameters derived from experimental data on phase equilibria at high pressures and high temperatures.
△ Less
Submitted 15 October, 2014;
originally announced October 2014.
-
Thermoelastic Equation of State of Boron Suboxide B6O up to 6 GPa and 2700 K: Simplified Anderson-Grüneisen Model and Thermodynamic Consistency
Authors:
Oleksandr O. Kurakevych,
Vladimir L. Solozhenko
Abstract:
p-V-T equation of state of superhard boron suboxide B6O has been measured up to 6 GPa and 2700 K using multianvil technique and synchrotron X-ray diffraction. To fit the experimental data, the theoretical p-V-T equation of state has been derived in approximation of the constant value of the Anderson-Grüneisen parameter δT. The model includes bulk modulus B0 =181 GPa and its first pressure derivati…
▽ More
p-V-T equation of state of superhard boron suboxide B6O has been measured up to 6 GPa and 2700 K using multianvil technique and synchrotron X-ray diffraction. To fit the experimental data, the theoretical p-V-T equation of state has been derived in approximation of the constant value of the Anderson-Grüneisen parameter δT. The model includes bulk modulus B0 =181 GPa and its first pressure derivative B0' = 6 at 300 K; two parameters describing thermal expansion at 0.1 MPa, i.e. a = 1.4x10-5 K-1 and b = 5x10-9 K-2, as well as δT = 6. The good agreement between fitted and experimental isobars has been achieved to the absolute volume changes up to 5% as compared to volume at standard conditions, V0. The fitted thermal expansion at 0.1 MPa is well consistent with the experimental data, as well as with ambient-pressure heat capacity cp, bulk modulus B0 and δT describing its evolution with volume and temperature. The fitted value of Grüneisen parameter γ = 0.85 is in agreement with previous empiric estimations for B6O and experimental values for other boron-rich solids.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Equation of state of single-crystal cubic boron phosphide
Authors:
Yann Le Godec,
Mohamed Mezouar,
Oleksandr O. Kurakevych,
Pascal Munsch,
Ugochukwu Nwagwu,
James H. Edgar,
Vladimir L. Solozhenko
Abstract:
The 300 K equation of state of cubic (zinc-blende) boron phosphide BP has been studied by in situ single-crystal X-ray diffraction with synchrotron radiation up to 55 GPa. The measurements have been performed under quasi-hydrostatic conditions using a Ne pressure medium in a diamond anvil cell. A fit of the experimental p-V data to the Vinet equation of state yields the bulk modulus B0 of 179(1) G…
▽ More
The 300 K equation of state of cubic (zinc-blende) boron phosphide BP has been studied by in situ single-crystal X-ray diffraction with synchrotron radiation up to 55 GPa. The measurements have been performed under quasi-hydrostatic conditions using a Ne pressure medium in a diamond anvil cell. A fit of the experimental p-V data to the Vinet equation of state yields the bulk modulus B0 of 179(1) GPa with its pressure derivative of 3.3(1). These values are in a good agreement with previous elastic measurements, as well as with semiempirical estimations.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Self-propagating high-temperature synthesis of boron subphosphide, B12P2
Authors:
Vladimir A. Mukhanov,
Petr S. Sokolov,
Ovidiu Brinza,
Dominique Vrel,
Vladimir L. Solozhenko
Abstract:
Two new methods to produce nanopowders of B12P2 boron subphosphide by self-propagating high-temperature synthesis have been proposed. Bulk polycrystalline B12P2 with microhardness of HV = 35(3) GPa and stability in air up to 1300 K has been prepared by sintering these powders at 5.2 GPa and 2500 K.
Two new methods to produce nanopowders of B12P2 boron subphosphide by self-propagating high-temperature synthesis have been proposed. Bulk polycrystalline B12P2 with microhardness of HV = 35(3) GPa and stability in air up to 1300 K has been prepared by sintering these powders at 5.2 GPa and 2500 K.
△ Less
Submitted 23 February, 2014;
originally announced February 2014.
-
Self-propagating high-temperature synthesis of boron phosphide
Authors:
Vladimir A. Mukhanov,
Petr S. Sokolov,
Yann Le Godec,
Vladimir L. Solozhenko
Abstract:
A new method of producing boron phosphide (BP) submicron powders by self-propagating high-temperature reaction between boron phosphate and magnesium in the presence of an inert diluent (sodium chloride) has been proposed. Bulk polycrystalline BP with microhardness of HV = 28(2) GPa has been prepared by sintering the above powders at 7.7 GPa and 2600 K.
A new method of producing boron phosphide (BP) submicron powders by self-propagating high-temperature reaction between boron phosphate and magnesium in the presence of an inert diluent (sodium chloride) has been proposed. Bulk polycrystalline BP with microhardness of HV = 28(2) GPa has been prepared by sintering the above powders at 7.7 GPa and 2600 K.
△ Less
Submitted 11 January, 2014;
originally announced January 2014.
-
Comment on "Thermodynamic properties of rock-salt ZnO" by Leitner et al. [Thermochimica Acta 572 (2013) 1-5]
Authors:
Petr S. Sokolov,
Oleksandr O. Kurakevych,
Andrey N. Baranov,
Vladimir L. Solozhenko
Abstract:
Very recently Leitner et al. [Thermochimica Acta 572 (2013) 1-5] have tried to extract the thermodynamic data of rock-salt ZnO from ab initio and experimental data available in the literature. In this Comment we show that neglecting (i) the strongly pronounced kinetic features of the pressure-induced phase transition in ZnO at room temperature and (ii) results of calorimetric measurements availabl…
▽ More
Very recently Leitner et al. [Thermochimica Acta 572 (2013) 1-5] have tried to extract the thermodynamic data of rock-salt ZnO from ab initio and experimental data available in the literature. In this Comment we show that neglecting (i) the strongly pronounced kinetic features of the pressure-induced phase transition in ZnO at room temperature and (ii) results of calorimetric measurements available in the literature [Russ. Chem. Bull. 59 (2010) 325-328] makes the proposed set of thermodynamic functions completely incorrect.
△ Less
Submitted 4 November, 2013;
originally announced November 2013.
-
Low-temperature thermal expansion of rock-salt ZnO
Authors:
Petr S. Sokolov,
Andrey N. Baranov,
Anthony M. T. Bell,
Vladimir L. Solozhenko
Abstract:
Lattice parameter of metastable high-pressure phase of zinc oxide, rock-salt ZnO was measured in the 10-300 K temperature range using synchrotron X-ray powder diffraction. No phase transition was observed down to 10 K. The lattice parameter of rock-salt ZnO was found to increase from 4.266 Å in the 10-80 K range up to 4.2752(3) Å at 298 K, while the volume thermal expansion coefficient increases f…
▽ More
Lattice parameter of metastable high-pressure phase of zinc oxide, rock-salt ZnO was measured in the 10-300 K temperature range using synchrotron X-ray powder diffraction. No phase transition was observed down to 10 K. The lattice parameter of rock-salt ZnO was found to increase from 4.266 Å in the 10-80 K range up to 4.2752(3) Å at 298 K, while the volume thermal expansion coefficient increases from slight negative values below 40 K up to 4.77\times10^-5 K^-1 at 298 K.
△ Less
Submitted 9 March, 2013;
originally announced March 2013.
-
Crystal structure of dense pseudo-cubic boron allotrope, pc-B52, by powder X-ray diffraction
Authors:
Oleksandr O. Kurakevych,
Vladimir L. Solozhenko
Abstract:
During past years, a number of reports have been published on synthesis of tetragonal allotrope of boron, t-B52 phase. However, no unambiguous characterization of the crystal structure has been performed to the present time, while remarkable variation of the a/c lattice-parameter ratio raises strong doubts about its uniqueness. Here the Rietveld refinement of the crystal structure of the high pres…
▽ More
During past years, a number of reports have been published on synthesis of tetragonal allotrope of boron, t-B52 phase. However, no unambiguous characterization of the crystal structure has been performed to the present time, while remarkable variation of the a/c lattice-parameter ratio raises strong doubts about its uniqueness. Here the Rietveld refinement of the crystal structure of the high pressure - high temperature boron phase synthesized by a direct solid-state transformation of rhombohedral beta-B106 at 20 GPa and 2500 K has been reported for the first time. Although this boron allotrope belongs to the t-B52 type, its structure can be considered as pseudo-cubic with the a/c ratio of sqr(2).
△ Less
Submitted 18 February, 2013;
originally announced February 2013.
-
On melting of silicon carbide under pressure
Authors:
Petr S. Sokolov,
Vladimir A. Mukhanov,
Thierry Chauveau,
Vladimir L. Solozhenko
Abstract:
The melting of silicon carbide has been studied at pressures 5-8 GPa and temperatures up to 3300 K. It has been found that SiC melts congruently, and its melting curve has negative slope of -44 +/- 4 K/GPa.
The melting of silicon carbide has been studied at pressures 5-8 GPa and temperatures up to 3300 K. It has been found that SiC melts congruently, and its melting curve has negative slope of -44 +/- 4 K/GPa.
△ Less
Submitted 11 October, 2012;
originally announced October 2012.
-
Effect of nanostructuration on compressibility of cubic BN
Authors:
Y. Le Godec,
O. O. Kurakevych,
P. Munsch,
G. Garbarino,
M. Mezouar,
V. L. Solozhenko
Abstract:
Compressibility of high-purity nanostructured cBN has been studied under quasi-hydrostatic conditions at 300 K up to 35 GPa using diamond anvil cell and angle-dispersive synchrotron X-ray powder diffraction. A data fit to the Vinet equation of state yields the values of the bulk modulus B0 of 375(4) GPa with its first pressure derivative B0' of 2.3(3). The nanometer grain size (\sim20 nm) results…
▽ More
Compressibility of high-purity nanostructured cBN has been studied under quasi-hydrostatic conditions at 300 K up to 35 GPa using diamond anvil cell and angle-dispersive synchrotron X-ray powder diffraction. A data fit to the Vinet equation of state yields the values of the bulk modulus B0 of 375(4) GPa with its first pressure derivative B0' of 2.3(3). The nanometer grain size (\sim20 nm) results in decrease of the bulk modulus by ~9%.
△ Less
Submitted 17 August, 2012;
originally announced August 2012.
-
On melting of B4C boron carbide under pressure
Authors:
Vladimir A. Mukhanov,
Petr S. Sokolov,
Vladimir L. Solozhenko
Abstract:
The pressure dependence of melting temperatures for boron carbide and B4C-carbon eutectic has been studied up to 8 GPa, and it was found that in both cases the melting curves exhibit negative slope (-13\pm6 K/GPa), that is indicative of higher density of the melt as compared to the solid phase.
The pressure dependence of melting temperatures for boron carbide and B4C-carbon eutectic has been studied up to 8 GPa, and it was found that in both cases the melting curves exhibit negative slope (-13\pm6 K/GPa), that is indicative of higher density of the melt as compared to the solid phase.
△ Less
Submitted 6 June, 2012; v1 submitted 4 June, 2012;
originally announced June 2012.
-
Comment on Zarechnaya et al. Pressure-induced isostructural phase transformation in gamma-B28. Phys. Rev. B 82, 184111 (2010)
Authors:
Yann Le Godec,
Artem R. Oganov,
Oleksandr O. Kurakevych,
Vladimir L. Solozhenko
Abstract:
Zarechnaya et al. claimed an isostructural transformation in gamma-B28 at about 40 GPa; below which the phase is more compressible (B0=227 GPa) and above which less compressible (B0=281 GPa) than in previous experiments or theory. Here we wish to point out some interesting questions related to these claims. Summarizing briefly our points, the suggestion of an isostructural transformation is incons…
▽ More
Zarechnaya et al. claimed an isostructural transformation in gamma-B28 at about 40 GPa; below which the phase is more compressible (B0=227 GPa) and above which less compressible (B0=281 GPa) than in previous experiments or theory. Here we wish to point out some interesting questions related to these claims. Summarizing briefly our points, the suggestion of an isostructural transformation is inconsistent with ab initio calculations and experiment, we see no physical mechanism that could be responsible for such a transformation, and the evidence for it is self-contradictory.
△ Less
Submitted 21 September, 2011;
originally announced September 2011.
-
The high-pressure phase of boron, γ-B28: disputes and conclusions of 5 years after discovery
Authors:
Artem R. Oganov,
Vladimir L. Solozhenko,
Carlo Gatti,
Oleksandr O. Kurakevych,
Yann Le Godec
Abstract:
γ-B28 is a recently established high-pressure phase of boron. Its structure consists of icosahedral B12 clusters and B2 dumbbells in a NaCl-type arrangement (B2)δ+(B12)δ- and displays a significant charge transfer δ~0.5- 0.6. The discovery of this phase proved essential for the understanding and construction of the phase diagram of boron. γ-B28 was first experimentally obtained as a pure boron all…
▽ More
γ-B28 is a recently established high-pressure phase of boron. Its structure consists of icosahedral B12 clusters and B2 dumbbells in a NaCl-type arrangement (B2)δ+(B12)δ- and displays a significant charge transfer δ~0.5- 0.6. The discovery of this phase proved essential for the understanding and construction of the phase diagram of boron. γ-B28 was first experimentally obtained as a pure boron allotrope in early 2004 and its structure was discovered in 2006. This paper reviews recent results and in particular deals with the contentious issues related to the equation of state, hardness, putative isostructural phase transformation at ~40 GPa, and debates on the nature of chemical bonding in this phase. Our analysis confirms that (a) calculations based on density functional theory give an accurate description of its equation of state, (b) the reported isostructural phase transformation in γ-B28 is an artifact rather than a fact, (c) the best estimate of hardness of this phase is 50 GPa, (d) chemical bonding in this phase has a significant degree of ionicity. Apart from presenting an overview of previous results within a consistent view grounded in experiment, thermodynamics and quantum mechanics, we present new results on Bader charges in γ-B28 using different levels of quantum-mechanical theory (GGA, exact exchange, and HSE06 hybrid functional), and show that the earlier conclusion about significant degree of partial ionicity in this phase is very robust.
△ Less
Submitted 20 September, 2011; v1 submitted 14 September, 2011;
originally announced September 2011.
