-
Channel Coherence Classification with Frame-Shifting in Massive MIMO Systems
Authors:
Ahmad Abboud,
Oussama Habachi,
Ali Jaber,
Jean-Pierre Cances,
Vahid Meghdadi
Abstract:
This paper considers the uplink pilot overhead in a time division duplexing (TDD) massive Multiple Input Multiple Output (MIMO) mobile systems. A common scenario of conventional massive MIMO systems is a Base Station (BS) serving all user terminals (UTs) in the cell with the same TDD frame format that fits the coherence interval of the worst-case scenario of user mobility (e.g. a moving train with…
▽ More
This paper considers the uplink pilot overhead in a time division duplexing (TDD) massive Multiple Input Multiple Output (MIMO) mobile systems. A common scenario of conventional massive MIMO systems is a Base Station (BS) serving all user terminals (UTs) in the cell with the same TDD frame format that fits the coherence interval of the worst-case scenario of user mobility (e.g. a moving train with velocity 300 Km/s). Furthermore, the BS has to estimate all the channels each time-slot for all users even for those with long coherence intervals. In fact, within the same cell, sensors or pedestrian with low mobility UTs (e.g. moving 1.38 m/s) share the same short TDD frame and thus are obliged to upload their pilots each time-slot. The channel coherence interval of the pedestrian UTs with a carrier frequency of 1.9 GHz can be as long as 60 times that of the train passenger users. In other words, conventional techniques waste 59-uploaded pilot sequences for channel estimation. In this paper, we are aware of the resources waste due to various coherence intervals among different user mobility. We classify users based on their coherence interval length, and we propose to skip uploading pilots of UTs with large coherence intervals. Then, we shift frames with the same pilot reused sequence toward an empty pilot time-slot. Simulation results had proved that the proposed technique overcome the performance of conventional massive MIMO systems in both energy and spectral efficiency.
△ Less
Submitted 14 November, 2017; v1 submitted 28 October, 2017;
originally announced October 2017.
-
Smart Massive MIMO: An Infrastructure toward 5th Generation Smart Cities Network
Authors:
Ahmad Abboud,
Jean-Pierre Cances,
Vahid Meghdadi,
Ali Jaber
Abstract:
On the Optimizing of Wireless Networks and toward improving the future 5th Generation mobile Network Infrastructure, we propose a novel infrastructure that can be the next Smart City Network. Our proposed Infrastructure takes into consideration most future demands and challenges, includes Capacity, Reliability, Scalability, and Flexibility. To deal with this issues we propose a wireless network in…
▽ More
On the Optimizing of Wireless Networks and toward improving the future 5th Generation mobile Network Infrastructure, we propose a novel infrastructure that can be the next Smart City Network. Our proposed Infrastructure takes into consideration most future demands and challenges, includes Capacity, Reliability, Scalability, and Flexibility. To deal with this issues we propose a wireless network infrastructure that is based on latest technologies of Massive MIMO systems. We further extend our infrastructure with many smart features, to be capable of coping with Cloud Computing, Smartphones, IoT and other intelligence-based services. The proposed infrastructure uses Network Functions Virtualization (NFV), Software-Defined Networking
(SDN), Virtual Antenna Arrays (VAA) and Joint Beamforming to afford flexibility. We further propose a Terminal-centric rather than a Cell-centric based Infrastructure, which optimize interference aware environment and lead to higher capacity and reliability. The new infrastructure includes multi-purpose nodes that run a Network Operating System (NOS). This node will afford a scalable and flexible cost effective and semi-distributed network resources. Other propositions that meet Power-Effective, Cost-Effective, and Scenery aware design are discussed. Keywords - Wireless Network Infrastructure, Massive MIMO, Joint Beamforming, Cloud-based Networks, NFV, SDN, Cloud Computing, Grid Computing, and Distributed Systems.
△ Less
Submitted 7 June, 2016;
originally announced June 2016.
-
Forecasting and skipping to Reduce Transmission Energy in WSN
Authors:
Ahmad Abboud,
Abdel-Karim Yazbek,
Jean-Pierre Cances,
Vahid Meghdadi
Abstract:
This paper deals with the improvement of energy efficiency in wireless sensor networks (WSN).Taking into consideration the power saving problem which is of crucial importance when the sensors are supplied by a limited power source, this paper proposes a method that optimizes as much as possible the transmission power of the sensors. Under the assumption of perfect channel between the Base Station…
▽ More
This paper deals with the improvement of energy efficiency in wireless sensor networks (WSN).Taking into consideration the power saving problem which is of crucial importance when the sensors are supplied by a limited power source, this paper proposes a method that optimizes as much as possible the transmission power of the sensors. Under the assumption of perfect channel between the Base Station (BS) and the Sensor Nodes (SN's) and with sufficient power resources at the BS, transferring the effort of transmission power to the BS will not be a peculiar issue. This paper proposes a method that reduces the transmitted data at the SN's and compensate this by requesting the variance of the measured value form predicted values. Furthermore, a request management algorithm (RMA) is developed to reduce the amount of requested data based on consecutive successive predictions. The result of this method reveals a major impact on reducing the transmission power at the SN's. Keywords: Wireless Sensor Networks, Data Reduction, Time Series Forecasting, Artificial Neural Networks.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
Indoor Massive MIMO: Uplink Pilot Mitigation Using Channel State Information Map
Authors:
Ahmad Abboud,
Jean-Pierre Cances,
Ali H. Jaber,
Vahid Meghdadi
Abstract:
Massive MIMO brings both motivations and challenges to develop the 5th generation Mobile wireless technology. The promising number of users and the high bitrate offered per unit area are challenged by uplink pilot contamination due to pilot reuse and a limited number of orthogonal pilot sequences. This paper proposes a solution to mitigate uplink pilot contamination in an indoor scenario where mul…
▽ More
Massive MIMO brings both motivations and challenges to develop the 5th generation Mobile wireless technology. The promising number of users and the high bitrate offered per unit area are challenged by uplink pilot contamination due to pilot reuse and a limited number of orthogonal pilot sequences. This paper proposes a solution to mitigate uplink pilot contamination in an indoor scenario where multi-cell share the same pool of pilot sequences, that are supposed to be less than the number of users. This can be done by reducing uplink pilots using Channel State Information (CSI) prediction. The proposed method is based on machine learning approach, where a quantized version of Channel State Information (QCSI) is learned during estimation session and stored at the Base Station (BS) to be exploited for future CSI prediction. The learned QCSI are represented by a weighted directed graph, which is responsible to monitor and predict the CSI of User Terminals (UTs) in the local cell. We introduce an online learning algorithm to create and update this graph which we call CSI map. Simulation results show an increase in the downlink sum-rate and a significant feedback reduction.
△ Less
Submitted 30 April, 2016;
originally announced May 2016.
-
LT Codes Combined with Network Coding for Multihop Powerline Smart Grid Networks
Authors:
Abraham Kabore,
Vahid Meghdadi,
Jean-Pierre Cances
Abstract:
This paper describes a novel approach for combining Luby Transform (LT) codes and Network Coding (NC) in the context of PowerLine Communications (PLC) smart grid networks. Multihop transmissions of LT-encoded data on PLC networks are considered and algorithms to combine data at relay nodes are proposed. Without the need to decode and then re-encode the total received data stream, the relay nodes c…
▽ More
This paper describes a novel approach for combining Luby Transform (LT) codes and Network Coding (NC) in the context of PowerLine Communications (PLC) smart grid networks. Multihop transmissions of LT-encoded data on PLC networks are considered and algorithms to combine data at relay nodes are proposed. Without the need to decode and then re-encode the total received data stream, the relay nodes can forward the received data stream while adding at the same time their own data. Simulation results are provided confirming the good performance of the proposed algorithms.
△ Less
Submitted 20 September, 2015;
originally announced September 2015.