Costuming:Allegiant-General-Pryde

From 501st Legion Databank
crlblackhd.gif
 
First Order Allegiant General Pryde
Prydemod1.jpg
Model ID 33633, Photo by Vicky Walker
 
Visit the Gallery for this Costume for more models and parts views.


Imperial-Officer-Corps.png

Description: Allegiant General Pryde
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars The Rise Of Skywalker

Enric Pryde was a human male officer who served with the Galactic Empire and later the First Order. He then again pledged his loyalty to Palpatine merging the First Order with the Sith Eternal to become the Final Order. Pryde held the military rank of Allegiant General giving him full command of both space and ground forces.


For 501st membership only the requirements in black need to be met.

The Imperial Officer Corps defines additional, optional levels of costuming excellence. In the page below, requirements for Level 2 “Executor” are listed in blue. Requirements for Level 3 “Imperator” are listed in red.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Required Costume Components

The following costume components are present and appear as described below.


Prydeface1.jpg Hair and Face
  • Face is clean shaven.
  • Hair is short with a receding hairline and combed back, hair is dark colored with light grey.



Prydetunic1.jpg Tunic, Black
  • Fabric is a medium weight material exactly matching the pants.
  • Tunic is fitted.
  • The pleated collar is tall with an angled V neck design and is snug to the neck.
  • Tunic is double-breasted left over right and closes at the right flank, the left breast has 2 pleats adjacent to the left side collar creating a look of 3 left pleats that end at abdomen level with all 3 widening at the bottom and right to left become slightly shorter.
  • The closure may use hidden side (or buck) clasps, snaps or hook and eyes.
  • The tunic has ridged epaulettes on both shoulders running from just past the top of the arm seam to the collar seam.
  • Sleeves are long and have a seam at the rear and the inside. Sleeves are without decoration, folded cuffs or buttons.
  • A visible seam line separates the sleeve from the straight cuff portion on the right sleeve.
  • The back of the tunic has princess seams intersecting the top of the rear sleeve seam turning inward and then run vertically to the bottom of the tunic, a centre seam runs vertical from bottom of the collar to waist level.
  • A First Order patch is present and centred on left bicep area.


OPTIONAL Level two certification (if applicable):
  • There are seams in the centre of the collar on both sides.
OPTIONAL Level three certification (if applicable):
  • The epaulettes on each shoulder are part of the sleeve-head piece.
  • First Order Patch is vinyl with metallic silver elements.




Prydeband.jpg Rank Insignia, First Order
  • Worn on the left side of arm, above the wrist and below the elbow.
  • Rank consists of two black bands sewn down to the sleeve and not loose.
  • Four white or silver stripes one at the top and bottom of both bands.


OPTIONAL Level two certification (if applicable):
  • Rank bands consist of two separate black bands with piping on the top and bottom edge of each.
OPTIONAL Level three certification (if applicable):
  • The stripes of the rank are silver and embroidered.



Prydepant1.jpg Trousers, Black
  • Fabric is a medium weight material matching the tunic.
  • Breeches have flares in the hip/thigh area, below the tunic and above the knee.
  • There is a fold on the legs creased from back to front, directly below the jodhpur's flares, tucking tightly into the boots, over the knees.


OPTIONAL Level two certification (if applicable):
  • The flares are semi-stiff.
OPTIONAL Level three certification (if applicable):
  • The fold-over detail at the knee ends in a subtle strap made from the same fabric as the trousers, which is secured at the inseam of each leg.



Prydeb.jpg Officer Boots, First Order
  • Knee-high, black, lace-less, smooth non-textured, leather or leather-like material, with moderate to high-gloss shine.
  • Buckles may be present.
  • Boot seams closely match screen-used boots.
  • Soles are flat.
  • If zippers are present, they are on the inner part of the boot shaft.


OPTIONAL Level two certification (if applicable):
  • Boots have a zipper on the inner shaft.
OPTIONAL Level three certification (if applicable):
  • Boots have a top strap and buckle on the outside of the boots.
  • The straps are set slightly to the rear with the tabs facing the rear.



PrydeG.jpg Gloves, First Order
  • Gloves are constructed of a non-textured, black leather or leather-like material.
  • Gloves have enclosed fingers, are fitted, and worn underneath the sleeves.
  • Gloves may have a snap on the inside at the wrist.
  • No visible buckles, straps, or ornamentation.



ID Hux belt.png Belt, First Order
  • The belt is constructed from a black, non-textured leather or a leather-like material.
  • The belt is approximately 2" to 2.5" in width.
  • Belt fits snugly over the natural waist of the wearer.
  • There are no loops on the belt.
  • Sizing holes on either side of the buckle are acceptable.
  • The buckle is constructed from a horizontally brushed metal, or metal-looking material.
  • Buckle is free of decoration, greeblies or insignia.
  • Buckle is rectangular, with sharp-angled edges, approximately 4.5" to 5.5" long & 2" to 3" high.


OPTIONAL Level two certification (if applicable):
  • Belt is made of leather.
  • There are no sizing holes.
  • Buckle has a slight horizontal curve.



Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.


Swgstick1.jpg Swagger Stick, Brown/Black
  • Approximately 17.5" long with a hexagonal head and tapers at the other end which has a hexagonal tip, the stick is cylindrical in the middle section.
  • The stick is brown with black staining with a silver end tip.


OPTIONAL Level two certification (if applicable):
  • The outer surface of the head contains a First Order symbol of a metallic appearance.
  • Three grooves encircle the stick 4.5" from the hexagonal head.






This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:Allegiant-General-Pryde&oldid=40621"