Costuming:CC CW-animated rex

From 501st Legion Databank
crlblackhd.gif
 
Captain Rex (Phase 1)
CC-Rex animated full.jpg
Model CC 3714, Photo by Dave M.
 
Visit the Gallery for this Costume for more models and parts views.


Clone-Trooper-Detachment.png

Description: Captain Rex (Phase 1)
Prefix: CC
Detachment: Clone Trooper Detachment
Context: The Clone Wars, seasons 1-3
Rex leads the 501st Legion, and has appeared in multiple episodes.

Please note that this costume is also eligible for membership in The Rebel Legion, although adjustments may need to be made for RL approval.


For 501st membership only the requirements in black need to be met.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

Special Notes:
• The “Animated” armor design, seen in 2008 The Clone Wars Cartoon Series, differs from the “Realistic” armor design used to create characters from the theatrical films, video games, and graphic novels. See this thread at 501stclonetroopers.com for the differences between the sculpts. (This may require an additional forum account.)
• Armor parts shall be made from fiberglass, ABS (Acrylonitrile Butadiene Styrene), HIPS (High Impact Polystyrene), or a similar rigid material. This includes vacuum formed plastics as well as properly finished and smoothed 3D printed armor forms. See this thread at 501stclonetroopers.com for examples of acceptable and unacceptable levels of 3D print finishing.
• All numerical measurements given in CTD CRLs are approximate. Measurements should be followed as closely as possible while not affecting the proportionality of costume details. Proportionality should take precedence over exact measurements.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Rex Helmet Phase1.jpg Helmet
  • Phase I animated style helmet.
    • Movie style helmets are not combined with animated armor.
  • Helmet is painted matte or satin white.
  • Narrow fin on dome.
  • Black eye lens extends down through the entire frown area.
  • All of the following paint details on the helmet are jagged edged and appear hand painted:
    • Blue outline around eye lens, extending down to mouth indent.
    • Blue "Jaig eyes" on forehead.
      • Jaig eyes" are not symmetrical.
    • Blue triangles between Jaig eyes
    • (4) yellow vertical stripes at either temple.
      • Stripes are soft edged and appear hand painted.
  • Raised bump at each ear, 1" - 1.25" in diameter.
  • (4) Vents on each side of helmet.
    • Vents may be painted black or grey, or cut out and filled with black mesh.
  • Blue stripe around back of dome.
  • Raised white circle at the back center of helmet.
  • White rectangular indent at the back center of the helmet.
  • Armor is weathered with shades of grey.




TC animated neckseal.jpg Neck Seal
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.


OPTIONAL Level two certification (if applicable):
  • Neck seal closes in the front via two small black snaps.
  • A black balaclava is worn with the neckseal.




TK anh stunt undersuit.jpeg Under Suit
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.



CC animated rex mantle.jpg Pauldron
  • Main pauldron base is black.
    • Left shoulder panel has a gray base.
  • (3) blue panel sections over the left shoulder, weathered with white along the edges.
  • (3) grey sections in the front, weathered with white along the edges.
  • Center line between the two front panels runs diagonal across the chest.
  • (3) grey sections in the back, weathered with white along the edges.
  • Rear section of mantle is large enough to cover the majority of the back detail box of the armor.



CC animated rex shoulderbells.jpg Shoulder Armor
  • Armor is painted matte or satin white.
  • Armor has a blue stripe down the center.
    • The edges of the stripe are jagged and appear hand painted.
  • Shoulders are padded so as not to rest flat against the arms.
    • The top of the bell sits 3/4" - 1" above the natural shoulder.
  • Armor is weathered with shades of grey.



CC animated rex biceps.jpg Upper Arm Armor
  • Armor is painted matte or satin white.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Armor has a blue stripe down the center.
    • The edges of the stripe are jagged and appear hand painted.



CC animated rex forearms.jpg Forearm Armor
  • Armor is painted matte or satin white.
  • Left forearm has a compad with (4) main square recessed areas and (1) slightly smaller square recessed area.
    • The smaller recess is closest to the elbow.
  • Armor is seamless on the outside edge.
    • Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
  • Elbow has a blue stripe down the center.
    • The edges of the stripe are be jagged and appear hand painted.
  • Forearm armor has a blue stripe down the center.
    • The edges of the stripe are jagged and appear hand painted.
    • The stripe is narrower at the wrist than at the bend of the elbow.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.



CC animated rex handplates.jpg Hand Plates
  • Armor is painted matte or satin white.
  • Hand plates are mirror images of each other.
  • Armor has a blue stripe down the center.
    • The edges of the stripe are jagged and appear hand painted.
  • Armor is weathered with shades of grey




Generic-black-gloves.jpg Gloves
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.




TC animated chest.jpg Chest Armor
  • Animated Phase I Chest Armor.
  • Armor is painted matte or satin white.
  • Lower portion of the chest has a curved notch for the abdomen armor to fit into.
  • Chest and Back Armor match together at the sides and shoulders with no open gap.
    • A seam line is present.
  • Shoulder straps are placed over the chest and back armor at the seams.
  • Armor is weathered with shades of grey.




TC animated back.jpg Back Armor
  • Animated Phase I Back Armor.
  • Armor is painted matte or satin white.
  • Rear center of back armor has detailed area that contains an O11 pattern.
  • Shoulder straps are placed over the Back and Chest armor at the seams.
  • Armor is weathered with shades of grey.




TC animated ab.jpg Abdomen Armor
  • Animated Phase I Abdomen Armor.
  • Armor is painted matte or satin white.
  • Top edge of the armor is curved to match the chest.
  • Abdomen armor protrudes out in the middle to match the shape of the chest.
  • (4) inset lines divide the abdomen armor into segments.
  • Abdomen and Kidney armor connect at the sides with no open gap.
    • A butted seam between abdomen and kidney armor is acceptable.
  • Armor is weathered with shades of grey.




TC animated grunt kidney.jpg Kidney Armor
  • Armor is painted matte or satin white.
  • Kidney and abdomen armor connect at the sides with no open gap.
    • A butted seam between the kidney and abdomen armor is acceptable.
  • Armor is weathered with shades of grey.




TC animated cod.jpg Codpiece and Belt front
  • Armor is painted matte or satin white.
  • Belt is approx. 3" tall and divided into 1.75" wide segments.
  • The front segments have a key/slot detail.
  • Belt boxes are mounted at the hips.
  • Codpiece and Posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Armor is weathered with shades of grey.




TC animated butt.jpg Posterior Armor, Belt rear and Detonator
  • Armor is painted matte or satin white.
  • Belt is approx. 3" tall and divided into 1.75" wide segments.
  • Posterior armor and Codpiece connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt.
    • Detonator has no control buttons.
    • The detonator has (2) lines set in approx 1⁄2" – 5⁄8" from the edges.
      • Lines may be recessed or painted on.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
  • Detonator lines are recessed.




TC Belt Boxes.png Belt Boxes
  • Two rectangular boxes with one mounted on each side of belt.
  • Boxes are painted matte or satin white.
    • The top side of the box is tapered outward.
    • There is an inset detail near the top of each box.
  • Armor is weathered with shades of grey.




TC animated thighs.jpg Thigh Armor
  • Armor is painted matte or satin white.
  • Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
  • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • The upper outer edge has an angled section.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.



CC animated rex kama.jpg Kama
  • The kama is made of black leather, leather like material, or heavy canvas.
  • The kama has blue trim that matches the stripes on the armor.
  • The front edges of the kama line up with the outside edges of the front two panels of the belt.
  • The back of the kama is split all the way up to the belt.




Holsters White Animated.jpg Holsters
  • Holsters are painted matte or satin white.
  • Holsters may connect to the belt via straps or directly to the kama with no visible attachment.
  • Armor is weathered with shades of grey.



CC animated rex shins.jpg Lower Leg Armor
  • Armor is painted matte or satin white.
  • Knee armor is integrated with the lower leg.
  • The armor has a flat center triangle below the knee plate, with the single point facing downward.
  • The calf detail of the armor has a ridge wrapping around the back of the leg.
  • Due to the shape of the armor, a butted seam is permitted on the inside or back of the leg.
  • Knee armor has a blue stripe down the center.
    • The edges of the stripe are jagged and appear hand painted.
  • Armor is weathered with shades of grey.




TC animated boots.jpg Boots
  • White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • Boots are laceless and have flat soles.
  • Boots have a center strip running from the toe to the ankle.
  • A strap across the top of the foot has two (2) flat white discs on either side of the foot, terminating the strap.


OPTIONAL Level two certification (if applicable):
  • Boots have accurate notched sole.



Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.



CW animated dc17 pistol.jpg DC-17 Hand Blaster (animated style)

Manufactured by BlasTech Industries, DC-17 pistols are designed for use as secondary weapons. Because they are widely recognized for their high stopping power and firing rate, many battlefield officers use them as primarily combat weapons.

  • This is the animated variant of the DC-17 blaster.
  • The number of pistols carried is dependent on the number of holsters.




CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.




Dc15a Animated.jpg DC-15A Blaster Rifle (animated style)

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.

  • This is the animated variant of the DC-15A blaster rifle.



Versions française

S'il vous plaît voir les lien ci-dessous pour le français des version traduites.




This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:CC_CW-animated_rex&oldid=31632"