Costuming:CC CW-animated thire

From 501st Legion Databank
crlblackhd.gif
 
Animated Lieutenant Thire
CC thire animated full.jpg
Model Sophia Ramos CC 44777, Photo by Adelino Ramos
 
Visit the Gallery for this Costume for more models and parts views.


Clone-Trooper-Detachment.png

Description: Lieutenant Thire
Prefix: CC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Seasons 1–3

CC-4477, nicknamed "Thire," was a clone trooper lieutenant, and later a commander, in charge of the elite shock troopers of the Coruscant Guard for the Galactic Republic during the Clone Wars.


For 501st membership only the requirements in black need to be met.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.

Special Notes:
• The “Animated” armor design, seen in 2008 The Clone Wars Cartoon Series, differs from the “Realistic” armor design used to create characters from the theatrical films, video games, and graphic novels. See this thread at 501stclonetroopers.com for the differences between the sculpts. (This may require an additional forum account.)
• Armor parts shall be made from fiberglass, ABS (Acrylonitrile Butadiene Styrene), HIPS (High Impact Polystyrene), or a similar rigid material. This includes vacuum formed plastics as well as properly finished and smoothed 3D printed armor forms. See this thread at 501stclonetroopers.com for examples of acceptable and unacceptable levels of 3D print finishing.
• All numerical measurements given in CTD CRLs are approximate. Measurements should be followed as closely as possible while not affecting the proportionality of costume details. Proportionality should take precedence over exact measurements.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Required Costume Components

The following costume components are present and appear as described below.


CC thire animated head.jpeg Helmet
  • Phase I Animated Style Clone helmet.
  • Helmet fin on dome. There is no tail light.
  • Macrobinoculars are mounted to helmet.
  • Helmet is painted matte or satin white with scarlet detail.
  • Scarlet detail color includes:
    • Interior cheek walls with about a 1/2 inch white border at bottom.
    • Cheek color extends upward with a 1/2 inch stripe next to ear column and ends with a diagonal cut towards the ear circle.
    • For more photos, visit the Lieutenant Thire helmet detail page.
    • Macrobinoculars is scarlet except for front lens cover which is black.
  • Helmet lens is black and extends down through the entire frown area.
  • Chin has a rectangular indent. There is no greeble.
  • Ear pieces have round center caps.
  • (4) Vents on each side of helmet.
    • Vents may be painted black or grey, or cut out and filled with black mesh.
  • A grey indented helmet band runs around to back of dome and continues down the indented “V” section.
  • Raised white disk on back of helmet is matte or satin white.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.




TC animated neckseal.jpg Neck Seal
  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.


OPTIONAL Level two certification (if applicable):
  • Neck seal closes in the front via two small black snaps.
  • A black balaclava is worn with the neckseal.




TK anh stunt undersuit.jpeg Under Suit
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.



Thire Pauldron.jpg Pauldron
  • Animated Style Phase I Clone Pauldron
  • Pauldron has a black base.
  • Pauldron has (6) medium to dark grey plates with three on front and three on back that are attached to black base.
    • Center line, between front sections, is diagonal across the chest.
    • Dark gray plates are weathered with lighter grey along the edges.
  • A raised panel with (3) raised medium gray plates is attached to Pauldron and extends over the left shoulder.
  • Pauldron base on back extends down over a majority of the back armor box detail.



CC thire animated shoulders.jpeg Shoulder Armor
  • Animated Style Phase I Clone Shoulder Armor.
  • Armor is painted matte or satin white with scarlet detail.
  • Scarlet detail includes:
  • Right Shoulder has a wide scarlet vertical stripe down the center.
  • Left Shoulder has a wide scarlet vertical stripe down the center with a modified white Coruscant guard symbol embedded in the stripe.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.



CC thire animated biceps front.jpeg Upper Arm Armor
  • Animated Style Phase I Clone Upper Arm Armor.
  • Armor is painted matte or satin white with scarlet detail.
  • A wide scarlet stripe is centered vertically on the outward facing side of each Upper Arm.
  • Armor has a notch on the lower area on back of armor that matches up with the elbow armor.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.



CC thire animated forearms.jpeg Forearm Armor
  • Animated Style Phase I Clone Forearm Armor.
  • Armor is painted matte or satin white with scarlet detail.
  • A wide scarlet stripe runs along the top surface of the Forearm from wrist end and up over the forward facing Elbow strap.
    • Forearm stripe is more narrow at wrist end and widens at Elbow end to align with Upper Arm Armor.
  • Left forearm has a white compad with (4) recessed squares and (1) slightly smaller recessed square.
    • The smaller recess is closest to the elbow.
    • White compad is surrounded by the scarlet stripe on left Forearm.
  • Armor is seamless on the outside edge.
    • Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the Upper Arm.
  • Elbow section is matte or satin white, except for the scarlet stripe that carries over the forward facing Elbow strap.
  • Scarlet color has scuff marks that expose the underlying white.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.



CC thire animated handplates.jpeg Hand Plates
  • Animated Style Phase I Clone Hand Plates.
  • Armor is painted matte or satin white with scarlet detail.
  • Hand plates have a top curving ridge that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • A scarlet stripe continues from Forearm and extends down along the outside half of each Hand Plate from the wrist. Stripe is squared off and does not continue to front edge of Hand Plate leaving white border on front.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.




Generic-black-gloves.jpg Gloves
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.



Thire Chest.jpg Chest Armor
  • Animated Style Phase I Clone Chest Armor.
  • Armor is painted matte or satin white with scarlet detail.
  • Scarlet detail is an arching stripe that carries from the bottom edge of each side and extends up under the raised chest plate. Ends are squared off.
  • Lower portion of the chest has a curved notch for the abdomen armor to fit into.
  • Chest and back armor match together at the sides and shoulders with no open gap.
    • A seam line is present.
  • Shoulder straps are placed over the chest and back armor at the seams.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.



Thire Back.jpg Back Armor
  • Animated Style Phase I Clone Back Armor.
  • Armor is painted matte or satin white with scarlet detail.
  • Scarlet detail stripe continues from Chest along lower edge of each side, and arcs back to the back box edges.
  • Rear center of back armor has detailed box area that contains a O11 pattern.
  • Shoulder straps are placed over the Back and Chest armor at the seams.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.




TC animated ab.jpg Abdomen Armor
  • Animated Phase I Abdomen Armor.
  • Armor is painted matte or satin white.
  • Top edge of the armor is curved to match the chest.
  • Abdomen armor protrudes out in the middle to match the shape of the chest.
  • (4) inset lines divide the abdomen armor into segments.
  • Abdomen and Kidney armor connect at the sides with no open gap.
    • A butted seam between abdomen and kidney armor is acceptable.
  • Armor is weathered with shades of grey.




TC animated grunt kidney.jpg Kidney Armor
  • Armor is painted matte or satin white.
  • Kidney and abdomen armor connect at the sides with no open gap.
    • A butted seam between the kidney and abdomen armor is acceptable.
  • Armor is weathered with shades of grey.



Thire Codpiece.jpg Codpiece and Belt front
  • Animated Style Phase I Clone Codpiece Armor and Belt Front.
  • Armor is painted matte or satin white with scarlet detail.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • Front two belt segments are scarlet and have a key/slot detail.
  • Cod has two wide stripes that come down just outside of the front two belt segments and angle outward to align with Thigh armor.
  • Belt boxes are mounted to the belt with one on each side.
  • Codpiece and Posterior armor connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.



Thire Posterior.jpg Posterior Armor, Belt rear and Detonator
  • Animated Style Phase I Clone Posterior Armor, Belt Rear and Detonator.
  • Armor is painted matte or satin white.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • Posterior armor and Codpiece connect at the hips.
    • Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt.
    • Detonator has no control buttons.
    • The detonator has (2) lines set in approx 1/2" – 5/8" from the edges.
    • Lines may be recessed or painted on
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
  • Detonator lines are recessed.



Thire beltboxes.jpg Belt Boxes
  • Animated Style Phase I Clone Belt Boxes.
  • Two rectangular boxes with one mounted on each side of belt.
  • Boxes are painted matte or satin white with scarlet detail.
    • The top side of the box is tapered outward.
    • There is an inset upside down “U” shape detail near the top of each box that is scarlet.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):



Thire Holsters.jpg Holsters
  • Animated Style Phase I Clone Holsters.
  • Holsters are painted matte or satin white.
  • Holsters connect to the belt via straps.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):



CC thire animated thighs.jpeg Thigh Armor
  • Animated Style Phase I Clone Thigh Armor.
  • Armor is painted matte or satin white with scarlet detail.
  • Front lower cut out section to fit the shape of the knee armor.
  • Scarlet cover the outside facing half of the Thigh with the top 1/4 left white. A wide scarlet stripe angles upward from the side of each Thigh to align with the Cod stripes. This leaves a white triangle on the front of each Thigh.
  • Scarlet color has scuff marks that expose the underlying white.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.



Thire Shins.jpg Lower Leg Armor
  • Animated Style Phase I Clone Lower Leg Armor.
  • Armour is painted matte or satin white with scarlet detail.
  • Knee armor is integrated with the lower leg and is all scarlet.
  • The armor has a flat center triangle below the knee plate, with the single point facing downward.
  • The calf detail of the armor has an indented arched section on the back of the leg.
  • The outside of the calf is seamless.
    • Calves have a trap door access through the arched indent in the rear of the lower leg.
  • Scarlet color has scuff marks that expose underlying white.
  • Armor is weathered with shades of grey.



Thire Boots.jpg Boots
  • Animated Style Phase I Clone Boots.
  • Boots are matte or satin white with scarlet detail.
  • Boots are ankl high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
  • A scarlet strip runs down the front center of each Boot. Scarlet color wraps around the ankle and back of the Boots.
  • Boots are lace-less and have flat soles which are all white.
  • Boot straps are scarlet and have a flat disc as each end. Discs are scarlet with most of the top half white.


OPTIONAL Level two certification (if applicable):
  • Boots have accurate notched sole.



Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.



CW animated dc17 pistol.jpg DC-17 Hand Blaster (animated style)

Manufactured by BlasTech Industries, DC-17 pistols are designed for use as secondary weapons. Because they are widely recognized for their high stopping power and firing rate, many battlefield officers use them as primarily combat weapons.

  • This is the animated variant of the DC-17 blaster.
  • The number of pistols carried is dependent on the number of holsters.




CRLdc15s-animated.jpg DC-15S Blaster Carbine (animated style)

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.

  • This is the animated variant of the DC-15S blaster rifle.




Dc15a Animated.jpg DC-15A Blaster Rifle (animated style)

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.

  • This is the animated variant of the DC-15A blaster rifle.






This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:CC_CW-animated_thire&oldid=31683"