Costuming:CT-Sinker Phase2

Wolfpack Clone Trooper: 104th Battalion (Phase II)

Model CT-6097, Photo by Logan Gosswiller

Visit the Gallery for this Costume for more models and parts views.

Description: Wolfpack Clone Trooper: 104th Battalion (Phase II) Prefix: CT Detachment: Clone Trooper Detachment Context: Sideshow Figure (Realistic version of Clone Wars character) The Clone Troopers of the 104th Battalion’s famed Wolfpack served under the command of Jedi General Plo Koon and Commander Wolffe. Members of the Wolfpack squad identify themselves with a distinctive melancholy grey wolf motifs, designed to honor fallen comrades at the hands of General Grievous during the Battle of Abregado Within the Wolfpack Squad, the Grunts adopted a uniform look featuring matte gray and white squad armor. Additional information: The Sideshow Figure which is used as raw model for this CRL is called 104th Battalion Wolfpack Grunt. We decided to keep the original name of the sideshow figure.

For 501st membership only the requirements in black need to be met. In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume. Special Notes: • The “Animated” armor design, seen in 2008 The Clone Wars Cartoon Series, differs from the “Realistic” armor design used to create characters from the theatrical films, video games, and graphic novels. See this thread at 501stclonetroopers.com for the differences between the sculpts. (This may require an additional forum account.) • Armor parts shall be made from fiberglass, ABS (Acrylonitrile Butadiene Styrene), HIPS (High Impact Polystyrene), or a similar rigid material. This includes vacuum formed plastics as well as properly finished and smoothed 3D printed armor forms. See this thread at 501stclonetroopers.com for examples of acceptable and unacceptable levels of 3D print finishing. • All numerical measurements given in CTD CRLs are approximate. Measurements should be followed as closely as possible while not affecting the proportionality of costume details. Proportionality should take precedence over exact measurements.

This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type. This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum. GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum. Measurements given in this document are intended to be approximate and generalized; not criteria for approval. Requirements for all 501st costumes are proportional to the wearer in scale, fit and size. Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.

Required Costume Components

The following costume components are present and appear as described below.

	Helmet Phase II Realistic Style Clone Helmet. Fan-made helmet. Animated style helmets are not combined with movie armor. Helmet is painted matte or satin white with matte med/dark gray details. Mohawk on top of the dome. A matte med/dark gray Wolfpack logo is centered on front of helmet between the Mohawk and black rim above the lens. A matching matte med/dark gray band frames around the Wolfpack logo in a circular pattern and wraps around the helmet. The helmet Mohawk remains white. Height of band on front of helmet is about 1 ¾ inches. Height of band above light gray indented band is about ¾ inches. Black eye lens extends down to the frown area. Indented cheek areas are painted matte med/dark gray. Cheek tubes, ear pieces, and lower helmet collar are painted matte med/dark gray. Ear caps are painted light gray with black border and two vertical black ovals between the light gray ridges. No tube stripes present. A light gray indented helmet band around back of dome. Rear center of helmet is painted matte med/dark gray. This darker color travels up through the lighter indented helmet band, continuing at the same angles, until it meets the upper darker gray stripe. Helmet frown is medium grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown. Matte med/dark gray has scuff marks that expose underlying white. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Helmet has the appearance of a neck ring.

---

	Neck Seal Neck seal is black in color with vertical ribbing or smooth in appearance. No logos or labels are visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.

---

	Under Suit Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

---

Shoulder Armor Realistic Style Clone Shoulder Armor. Shoulders are tear drop in shape with all rounded edges. Armor is painted matte or satin white with matte med/dark gray detail. Right shoulder armor is overlaid entirely with matte med/dark gray. Left shoulder armor is painted matte med/dark gray with a white star burst design starting as a diamond at bottom and moving in an outward motion toward the top of the shoulder armor. Shoulders are padded so as not to rest flat against the arms. Matte med/dark gray has scuff marks that expose underlying white. Armor is weathered with shades of grey.

---

Upper Arm Armor Realistic Style Clone Upper Arm Armor. Armor is painted matte or satin white with matte med/dark gray detail. Matte med/dark gray stripe is along outside half of armor. Stripe starts at front outside edge and about 3 ½ inches wide leaving some of the back armor white. Armor has a front hard line outside edge and inside rounded edge. Armor piece has a dimple on the lower area of the back of the arm. Armor is seamless. No visible traces of how the armor was assembled are shown. Matte med/dark gray has scuff marks that expose the underlying white. Armor is weathered with shades of grey.

---

Elbow Armor Realistic style Clone Elbow Armor. Armor is painted matte or satin white and overlaid with matte med/dark gray. Elbow straps are white and have a raised detail line at the top and bottom of the strap. Armor has two parallel dashed detail slots on each outside edge of elbow at the strap connection. Elbows are mirror images of each other with a notched area on the outside of the elbow above the detail marks. Matte med/dark gray has scuff marks that expose the underlying white. Armor is weathered with shades of grey.

---

	Forearm Armor Realistic Style Clone Forearm Armor. Armor is painted matte or satin white. Shape of both the left and right forearms are mirror images of each other. Armor is seamless. No visible traces of how the armor was assembled are shown. Right forearm has a compad with 8 small buttons,1 Large main button, and 1 slightly smaller rectangular button. Forearm tops have a flattened triangular area with a ridge that comes to a point at the top of the forearm. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Compad has detail antenna on its left.

---

	Hand Plates Realistic Style Clone Hand Plates. Armor is painted matte or satin white. Hand plates have a top curving ridge that come to a point over the index or middle finger just past the main knuckle of the hand. Armor is weathered with shades of grey.

---

	Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves cover any exposed skin. Gloves do not show any labels or logos when the armor is worn.

---

Chest Armor Realistic Style Clone Chest Armor. Armor is painted matte or satin white with matte med/dark gray detail. Top part of chest is painted with a curved matte med/dark gray section. Matte med/dark gray starts about 4 inches above elevated chest lower edge. Arch of matte med/dark gray curves up to about ½ inch below center of neck opening. Chest and back armor match together at the sides with no open gap. A seam line is present. Two detail slots on right breast. Chest and back armor match together at the sides with no open gap. A seam line is present. Shoulder straps are placed underneath the chest to connect to the back. Shoulder straps are painted black. Armor is weathered with shades of grey.

---

	Back Armor Realistic Style Clone Back Armor. Armor is painted matte or satin white with matte med/dark gray detail. Top half of the back armor is painted with a matte med/dark gray section, extending down to the bottom of the detail plate. Rear center plate has detailed area that contains 4 circles. Under the circles, at the left side of the back, there are two parallel lines On the right of the back there is a squared detail. Back and chest armor match together at the sides with no open gap. A seam line is present. Shoulder straps are placed underneath the back to connect to the chest. Shoulder straps are painted black. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Highly detailed resin back box plate cover with circuitry insets.

---

Abdomen Armor Realistic Style Clone Abdomen Armor. Armor is painted matte or satin white. Eight ¼ inch diameter holes, with four holes inside each indented channel of the abdomen. Abdomen section wraps around the wearers body and is sealed at sides or at back. Abdomen is completely contained under the chest and back armor. Armor aligns with codpiece with the seam line hidden by the belt. Armor is weathered with shades of grey.

---

	Cod and Posterior Armor Realistic Style Clone Codpiece and Posterior Armor. Armor is painted matte or satin white. Codpiece and Posterior armor connect at the hips. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Hips have correct detail connector snap and edge feature at the codpiece and posterior side connection.

---

	Belt Realistic Style Clone Belt, Boxes and Detonator. Belt, boxes, and detonator are painted matte or satin white. Belt front, between front boxes, has three vertical rectangle indents which are spaced apart by two protruding rectangle areas. The rest of the belt is flat surfaced with raised edging on top and bottom that run along the rest of the belt. Eight Belt Boxes are attached to Belt, with four on each side. The two largest Boxes are in front with angled top surface that is higher toward the center. The smallest boxes are located behind the front boxes, about ⅛ inch apart and have an angled end on top. The medium sized matching boxes, with flat top cover, are about ⅛ inch from smallest boxes. Left rear box is spaced closer to detonator and has two square buttons in the top left corner, and two dashed indented detail marks on bottom right. Right rear box is spaced closer to detonator and has a bar with two small cylinders centered, and two dashed indented detail marks on bottom left. A detonator is centered and attached to back of Belt. Detonator tube is about 2 ¼ inch diameter with wider detailed end caps. Seven horizontally aligned square buttons are on left side of tube, facing backwards. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Boxes are notched on back and fit flush to belt.
	OPTIONAL Level three certification (if applicable): Back of belt, between rear boxes, has horizontal ribbing. Detonator connects to back of belt without any visible clips and is firmly secured in horizontal position.

---

	Thigh Armor Realistic Style Clone Thigh Armor. Armor is painted matte or satin white. Front of thigh armor has a flat triangular area near the knee. From the top of the triangle a ridge line travels up the front of the thigh to the top edge. Rear of the thigh has an indention. Armor is seamless. No visible traces of how the armor was assembled are shown. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Outside of lower edge comes to a point. Inner lower edge is rounded.

---

	Knee Armor Realistic Style Knee Armor. Armor is painted matte or satin white. Knees have a protruding flat area in front oriented towards the top of Knee. Knees bend around the front and connect to white detail clips that connect the strap on each side. White knee strap is on each knee and wraps around the back of the leg. Straps have a raised center strip that is gray. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Connection between the knee and the strapping has a white detail clip.

---

Lower Leg Armor Realistic Style Clone Thigh Armor. Armor is painted matte or satin white with matte med/dark gray detail. Lower shins are painted with a matte med/dark gray paint pattern. Front of armor is matte med/dark gray. Front matte med/dark gray pattern covers the front and about ¼ of the sides along the top edge of the flat triangular area and angles downward wrapping around the back. Gray angled pattern on sides connect on back of armor in an inverted circular arch about 5 inches above bottom edge, leaving the upper half of armor white. The spoon insert has a white squared area at bottom about 3 ½ inches high, leaving about a 1 ½ inch gray band that forms the inverted circular pattern. Front of lower leg has a flat triangular detail at the top which transitions to a ridge line that travels down the front of the armor to the ankle. Back of lower leg armor features arched indentation, just under the calf, that follows down to the ankle. Bottom of this indentation features a smaller arch detail at the heel. Outside of the calf is closed. Calf can have an access area on the inside of the leg. Calves are seamless and have a trap door access through the indent in the rear of the lower leg. Matte med/dark gray areas are weathered with various scuff marks that expose underlying white. Armor is weathered with shades of grey.

---

Boots Realistic Style Clone Boots. Boots are white. Boots are ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle. Boots are lace-less. The boots have armor detail to include a natural seam at the toe and a white strap that goes over the top of the foot with two protruding disks at each side of the strap. There are no markings or labels from the shoe makers. Boot soles are flat. Boot soles are colored primer grey.

---

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

	DC-15S Blaster Manufactured by BlasTech Industries, the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the “A” model, it is easier to handle with a higher rate of fire and features a folding stock for braced firing. Realistic Clone Style DC-15S Blaster. Blaster may be scratch built out of plastic, wood, metal or cast in resin. Blaster has realistic Episode II or Episode III details: Wire frame sight. Folding stock. Twelve radiator fins evenly spaced along the length of barrel. Igniter detail knobs. Charge magazine clip on right side. Total length is approximately 26 inches (66 cm). Because of the scale, the Hasbro version is incorrect.
	OPTIONAL Level two certification (if applicable): Charge magazine detail on clip is metal to gun metal grey in color. Detail bolts and screws are metal to gun metal grey in color. Igniter knobs have some copper coloring. Blaster is weathered.
	OPTIONAL Level three certification (if applicable): Functioning Blue LED is installed in barrel.

---

	DC-15A Blaster Rifle Manufactured by BlasTech Industries, the DC-15A is a Tibanna gas cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets. Realistic Clone Style DC-15A Blaster Rifle. Blaster rifle is scratch built out of plastic, wood, metal or cast in resin. Blaster has realistic Episode II or Episode III details: Flip up sight in down position. Ten radiator fins are evenly spaced along the length of the barrel. Power setting adjuster detail lever. Sniper Scope attached under rifle in storage position. Charge magazine clip on left side. Igniter detail knobs. Total length is approximately 55 inches (139.7 cm). Because of the scale, the Hasbro version is not allowed.
	OPTIONAL Level two certification (if applicable): Charge magazine detail on clip is metal to gun metal grey in color. Detail bolts and screws are metal to gun metal grey in color. Igniter has some copper coloring. Power setting adjuster detail lever is metal or gun metal grey. Sniper scope is metal or gun metal grey. Blaster is weathered.
	OPTIONAL Level three certification (if applicable): Functioning Blue LED is installed in barrel.

---

• This CRL is available as a PDF

This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.