Costuming:CT - Wolfpack Grunt Phase 2

Wolfpack Grunt (Phase II)

Model CT-49876, Photo by Belle C.

Visit the Gallery for this Costume for more models and parts views.

	Description: Wolfpack Grunt (Phase II) Prefix: CT Detachment: Clone Trooper Detachment Context: The Clone Wars, Season 4 The Wolfpack, also known as the Wolf Pack Battalion, was a clone trooper squad in the Grand Army of the Republic's 104th Battalion that was led by Jedi General Plo Koon.

For 501st membership only the requirements in black need to be met. In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume. Special Notes: • The “Animated” armor design, seen in 2008 The Clone Wars Cartoon Series, differs from the “Realistic” armor design used to create characters from the theatrical films, video games, and graphic novels. See this thread at 501stclonetroopers.com for the differences between the sculpts. (This may require an additional forum account.) • Armor parts shall be made from fiberglass, ABS (Acrylonitrile Butadiene Styrene), HIPS (High Impact Polystyrene), or a similar rigid material. This includes vacuum formed plastics as well as properly finished and smoothed 3D printed armor forms. See this thread at 501stclonetroopers.com for examples of acceptable and unacceptable levels of 3D print finishing. • All numerical measurements given in CTD CRLs are approximate. Measurements should be followed as closely as possible while not affecting the proportionality of costume details. Proportionality should take precedence over exact measurements.

This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type. This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum. GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum. Measurements given in this document are intended to be approximate and generalized; not criteria for approval. Requirements for all 501st costumes are proportional to the wearer in scale, fit and size. Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.

Required Costume Components

The following costume components are present and appear as described below.

Helmet Phase II animated style helmet. Movie style helmets are not combined with animated armor. Helmet is painted matte or satin white with matte med/dark gray details. Mohawk on top of dome. A matte med/dark gray Wolfpack logo starts near the top of the dome and wraps around the lower portion of the helmet Mohawk. The helmet Mohawk remains white. A matte med/dark gray 2 inch band curves up and out above the lens wrapping around the back of the helmet above the indented helmet band. The frown has 6 removed teeth spaces. Black colored plastic mesh is utilized inside the helmet to cover the open pieces of the frown. (3) Ear caps are matte med/dark gray. (6) vents on each side of helmet. Vents may be painted black or gray, or cut out and filled with black mesh. Black eye lens extends down to the frown area. A matte light gray indented helmet band around back of dome. Rear center of the helmet is painted matte med/dark gray. This darker color travels up through the lighter indented helmet band, continuing at the same angles, until it meets the upper darker band. Armor is weathered with shades of gray.

---

	Neck Seal Neck seal is black in color with no ribbing. No logos or labels are visible.
	OPTIONAL Level two certification (if applicable): Neck seal closes in the front via two small black snaps. A black balaclava is worn with the neckseal.

---

	Under Suit Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

---

Shoulder Armor Right shoulder armor is painted matte med/dark gray. Left shoulder armor is painted matte med/dark gray with a white star-burst design starting as a diamond at the bottom and moving in an outward motion toward the top of the shoulder armor. Shoulders have all rounded edges. Shoulder armor is not symmetrical. The shoulders slightly curve back at the bottom. Armor is weathered with shades of gray.

---

	Upper Arm Armor Armor is painted matte or satin white with matte med/dark gray details. Outside half of armor is painted matte med/dark gray. Armor is cylindrical with no rear indent. Armor is seamless. No visible traces of how the armor was assembled are shown. Armor is weathered with shades of gray.

---

	Forearm Armor Armor is painted matte or satin white with matte med/dark gray details. Right forearm has a compad with 6 raised buttons, and a larger rectangle above them. A smaller raised section is closest to the elbow. Armor is seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required. Elbow plate is integrated into the forearm. Elbow area of forearm is painted matte med/dark gray. Armor is weathered with shades of gray.
	OPTIONAL Level two certification (if applicable): Armor is seamless. No visible traces of how the armor was assembled are shown.

---

	Hand Plates Armor is painted matte or satin white. Hand plates are mirror images of each other. Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand. Armor is weathered with shades of grey.

---

	Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves cover any exposed skin. Gloves do not show any labels or logos when the armor is worn.

---

Chest Armor Armor is painted matte or satin white with matte med/dark gray details. Top part of the chest is painted with a curved matte med/dark gray section. Lower portion of the chest has a squared notch for the abdomen armor to fit into. Chest and back plate match together at the sides and shoulders with no open gap. Butted seam lines are permitted if required. Matte med/dark gray shoulder straps fit into the top of the chest and back. Armor is weathered with shades of gray.

---

Back Armor Armor is painted matte or satin white with matte med/dark gray details. Top half of the back armor is painted with a matte med/dark gray section, extending down to the bottom of the detail plate. Back armor has a detail plate consisting of (4) circles and (5) horizontal bars. Chest and back plate match together at the sides and shoulders with no open gap. Butted seam lines are permitted if required. Matte med/dark gray shoulder straps fit into the top of the chest and back. Armor is weathered with shades of gray.

---

	Abdomen Armor Armor is painted matte or satin white. Top edge of the armor is squared off to match the chest armor. The abdomen armor protrudes out in the middle to match the shape of the chest armor. The abdomen armor joins at the rear and the join is covered by a center plate. Armor is weathered with shades of grey.

---

	Codpiece and Belt front Armor is painted matte or satin white. Belt is approx 3" tall and divided into 1.75" wide segments. The front segments have a key/slot detail. Belt boxes are mounted on the front. Codpiece and Posterior armor connect at the hips. Butted seams are permitted at this connection if required. Armor is weathered with shades of grey.

---

	Posterior Armor, Belt Rear and Detonator Armor is painted matte or satin white. Belt is approx. 3 inches tall and divided into segments. Cod and Posterior armor connect at the hips. Butted seams are permitted at this connection if required. Detonator is centered on the back of belt with no control buttons. The detonator has 2 lines set in approx. ½ inch - 5/8 inch from the edges. Lines may be recessed or painted on. The center of the detonator end caps are painted gray. Armor is weathered with shades of gray.
	OPTIONAL Level two certification (if applicable): Detonator lines are recessed.

---

	Belt Boxes Two rectangular boxes with one mounted on each side of belt. Boxes are painted matte or satin white. The top side of the box is tapered outward. There is an inset detail near the top of each box. Armor is weathered with shades of grey.

---

	Thigh Armor Armor is painted matte or satin white. Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor. From the top of the triangle a ridge line travels up the front of the thigh to the top edge. The upper outer edge has an angled section. Armor is weathered with shades of grey.
	OPTIONAL Level two certification (if applicable): Armor is seamless. No visible traces of how the armor was assembled are shown.

---

	Lower Leg Armor Armor is painted matte or satin white with matte med/dark gray details. Knee armor is integrated with the lower leg. Lower shins are painted with a matte med/dark gray paint scheme. Angled matte med/dark gray stripe wraps around back of leg. Knee area is painted matte or satin white. The front of the armor has a triangular detail just below the knee and a hard ridge line down the front of the shin. Back of the lower legs have an indentation just under the calf that extends down to the ankle. The outside of the calf is seamless. A clam shell opening on the inner seam is acceptable. Armor is weathered with shades of gray.
	OPTIONAL Level two certification (if applicable): Armor is seamless with a trap door access through the indent in the rear of the lower leg.

---

	Boots White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area. Boots are laceless and have flat soles. Boots have a center strip running from the toe to the ankle. A strap across the top of the foot has two (2) flat white discs on either side of the foot, terminating the strap.
	OPTIONAL Level two certification (if applicable): Boots have accurate notched sole.

---

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

	DC-15S Blaster Carbine (animated style) Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic. This is the animated variant of the DC-15S blaster rifle.

---

	DC-15A Blaster Rifle (animated style) Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic. This is the animated variant of the DC-15A blaster rifle.

---

• This CRL is available as a PDF

This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.