Costuming:CT BF2 CG Heavy

From 501st Legion Databank
crlblackhd.gif
 
Coruscant Guard (Phase II) — Heavy Trooper
CGHeavyFullBody.jpg
Model CT22316, Photo by Nelly Orozco
 
Visit the Gallery for this Costume for more models and parts views.


Clone-Trooper-Detachment.png

Description: Coruscant Guard (Phase II) — Heavy Trooper
Prefix: CT
Detachment: Clone Trooper Detachment
Context: Star Wars Battlefront II

The Coruscant Guard is a military police division within the Grand Army of the Republic. They serve to protect the Republic’s capital of Coruscant and are distinguished by their armor’s red markings. Their duties also include patrolling the capital and escorting diplomats and other dignitaries, such as the Supreme Chancellor.


For 501st membership only the requirements in black need to be met.

In the page below, items listed in blue are recommended features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Required Costume Components

The following costume components are present and appear as described below.


CGHeavyHelmet.jpg Helmet
  • Phase II helmet.
    • Note: This helmet differs from a realistic style ROTS helmet.
  • Armor is painted gloss or satin white.
  • The mohawk on top of the dome is painted red.
  • There are two additional red mohawks adjacent to the fin on top of the dome.
    • The additional mohawks extend below the front and rear edges of the center fin.
  • There are twelve, evenly spaced, vertical red stripes on the front forehead section of the dome.
  • There is a red visor mounted to the brow above the eye lens.
    • Visor wraps around the helmet, past the ears.
    • Visor connects to the cheeks via two connection clips.
  • Black eye lens.
  • The charcoal grey frown has six removed teeth spaces.
    • Black colored wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
  • The top of the chin, cheeks, face and back of the helmet are painted red.
  • The ears and vertical ridges below the ears are painted white.
  • The front section of the aerator tubes has six, evenly spaced, horizontal red stripes.
  • The side vent tubes have nine evenly spaced dark blue vertical stripes.
  • Ear caps are painted a dark grey or black.
  • There is an indented helmet band around the back of the helmet painted grey.
  • The vent on the rear of the helmet is painted black.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.



TK anh stunt neckseal.jpeg Neck Seal
  • Battlefront II Neck Seal.
  • Neck seal is black in color with horizontal ribbing similar to a stormtrooper.
  • No logos or labels are visible.
    • If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.




TK anh stunt undersuit.jpeg Under Suit
  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.



CGHeavyHarness.jpg Heavy Assault Harness
  • Shoulder strap harness connector attaches over the right shoulder strap.
    • Harness connection has a silver strap connector on front and back, with center band colored black.
  • Front black belt strap is 2 inches wide and extends from the top of the two front belt boxes and feeds through the front harness connector.
  • There are three cylindrical canisters attached to the front of the strap via fabric loops.
    • The sides of the canisters are red and the ends are primer grey.
    • There is a recessed red circle on both ends of each canister.
  • The right belt box strap runs up and into the harness connector from behind, then feeds outward over front and crosses the chest down to the left belt box.
  • Front belt boxes each have a small, ½ inch high, grey connector frame detail on top that the strap feeds into.
  • A silver buckle is secured at the center of the cross over strap.
  • Overlaid on top of front straps, over the right chest, is a black angular plate. Plate is located between the shoulder connector and metal buckle.
  • A grey belt strap is 2 inches wide and attaches to the back harness connector and extends down to the rear right belt box, next to the detonator.
  • Rear right belt box has a small ½ inch high grey connector frame detail on top that the strap feeds into.
  • There is an additional black armor mantle attached to the harness over the right shoulder.




CGHeavyShoulders.jpg Shoulder Armor
  • Armor is painted red.
  • Shoulders are tear drop in shape with all rounded edges.
  • Shoulder armor is not symmetrical.
    • The shoulders slightly curve back at the bottom.
  • The red areas are weathered with various chips and scuff marks.
  • Armor is weathered with shades of grey.



CGHeavyBiceps.jpg Upper Arm Armor
  • Armor is painted gloss or satin white.
    • Two approximately ½ inch red stripes, spaced approximately ½ inch apart, encircle the lower part of the upper arm.
  • A dimple on the lower area of the back of the arm.
  • The outside of the bicep has a hard line edge at the front that turns in.
  • The inside of the upper arm is rounded.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • The red areas are weathered with various chips and scuff marks.
  • Armor is weathered with shades of grey.




Clone elbow copy.jpg Elbow Armor
  • Realistic style elbow armor.
  • Armor is painted matte or satin white.
  • Elbow straps have a raised detail line at the top and bottom of the strap.
  • Armor has two parallel dashed detail slots on each outside edge of elbow at the strap connection.
  • Elbows are mirror images of each other with a notched area on the outside of the elbow above the detail marks.
  • Armor is weathered with shades of grey.



CGHeavyForearms.jpg Forearm Armor
  • Armor is painted red.
  • Forearms are mirror images of each other (except for the compad).
  • Right forearm has a white compad with eight small buttons, one large main button, and one slightly smaller rectangular button.
  • Forearm tops have a flattened triangular area with a ridge that comes to a point at the top of the forearm.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • Instead of a hard edge, the top of the forearm has a bone ridge.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.




Generic-black-gloves.jpg Gloves
  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.



CGHeavyHands.jpg Hand Plates
  • Armor is painted red with a white return edge.
  • Hand plates are mirror images of each other.
  • Hand plates have a top curving ridge that comes to a point over the index or middle finger, just past the main knuckle of the hand.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.




CGHeavyChest.jpg Chest Armor
  • Armor is painted gloss or satin white.
    • The upper portion of the chest is painted red.
    • The red stops at all the return edges.
  • Two detail slots are present on the outer corner of the right breast.
  • Chest and back armor match together at the sides with a small gap.
  • Shoulder straps are slotted into the detail ridges of the top connection points
  • The red areas are weathered with various chips and scuff marks.
  • Armor is weathered with shades of grey.



CGOfficerBack.JPG Back Armor
  • Armor is painted gloss or satin white.
  • Back armor has a detail plate with four recessed circles.
    • Under the circles there are two recessed stadium shape details on the left and a detailed, recessed rectangular shape on the right.
  • Back and chest armor match together at the sides with a small gap.
  • Shoulder straps are slotted into the detail ridges of the top connection points
  • Armor is weathered with shades of grey.



CGHeavyPack.jpg Backpack
  • Armor is painted gloss or satin white.
  • The backpack has a large, black Republic emblem on the back of the pack.
    • The emblem is weathered with scuffs that expose the underlying white.
  • The backpack has a trapezoidal, grey, cloth covering over the top opening.
    • The covering has a grey trim.
    • The covering is attached to the back of the pack with a single silver snap.
  • The sides of the pack feature raised geometric shapes matching visual references.
  • The bottom of the pack features a rounded area where a cylindrical capsule would sit.
    • The pack does not feature a cylinder like the animated or Sideshow Toy versions.
  • Armor is weathered with shades of grey.



CGHeavyAbs.jpg Abdomen Armor
  • Armor is painted gloss or satin white.
  • Eight ¼" diameter holes, with four holes inside each indented channel of the abdomen.
  • Abdomen armor wraps around the wearer's body and is sealed at sides or back.
  • Abdomen is completely contained under the chest and back armor.
  • The recessed channels of the abdomen armor are painted red.
  • Armor is weathered with shades of grey.
  • Abdomen is seamless at the sides and closed in the back.
    • A detail plate covers the seam line.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.



CLone cod and rear.jpg Cod and Posterior Armor
  • Armor is painted gloss or satin white.
  • Cod and Posterior armor connect at the hips.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
*Hips have correct detail connector snap and edge feature at the codpiece and posterior side connection.



CGHeavyBelt.jpg Belt
  • The Belt is painted red.
  • Belt front, between front boxes, has three vertical rectangle indents which are spaced apart by two protruding rectangle areas.
    • The rest of the belt is flat surfaced with raised edging on top and bottom that run along the rest of the belt.
  • Eight belt boxes are attached to belt, with four on each side.
    • The two largest boxes are in front with angled top surface that is higher toward the center.
    • The smallest boxes are located behind the front boxes, about ⅛ inch apart and have an angled end on top.
    • The medium sized matching boxes, with flat top cover, are about ⅛ inch from smallest boxes.
    • Left rear box is spaced closer to detonator and has two square buttons in the top left corner, and two dashed indented detail marks on bottom right.
  • Right rear box is spaced closer to detonator and has a bar with two small cylinders centered, and two dashed indented detail marks on bottom left.
  • A white detonator is centered and attached to the back of Belt.
    • Detonator tube is about 2¼ inch diameter with wider detailed end caps.
    • Seven horizontally aligned square buttons are on left side of tube, facing backwards.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.


OPTIONAL Level two certification (if applicable):
  • Boxes are notched on back and fit flush to belt.
OPTIONAL Level three certification (if applicable):
  • Back of belt, between rear boxes, has horizontal ribbing.



CGHeavyThighs.jpg Thigh Armor
  • Armor is painted gloss or satin white.
    • A 1 inch wide red stripe travels the length of the outside thigh, just forward of center.
    • From that vertical line, two 2 inch red stripes, spaced one inch apart, end at the front thigh armor ridge.
    • 1 inch below the bottom stripe, the lower portion of the thigh is painted red between the center ridge and vertical red stripe.
  • Front of thigh armor has a flat triangular area near the knee.
  • From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
  • Rear of the thigh has an indention.
  • Armor is seamless.
    • No visible traces of how the armor was assembled are shown.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.



CGHeavyKnees.jpg Knee Armor
  • Armor is painted gloss or satin white.
  • Knees wrap around the front of the leg.
  • A raised detail line is present in the center of the armor.
    • The raised portion is painted red.
  • Knees are strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the knee.


OPTIONAL Level two certification (if applicable):
  • Center strap is primer gray.
  • Connection between the knee and the strapping has a detail clip.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.



BF2CGheavyShins.jpg Lower Leg Armor
  • Armor is painted red.
  • Lower Legs are mirror images of each other.
  • The front of the armor has a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
  • Back of lower leg armor features arched indentation, just under the calf, that follows down to the ankle.
    • Bottom of this indentation features a smaller arch detail at the heel.
  • Outside of the calf is closed.
    • Calf can have an access area on the inside of the leg.
  • Calves are seamless and have a trap door access through the indent in the rear of the lower leg.
  • The red areas are weathered with scuffs and chips.
  • Armor is weathered with shades of grey.



CGHeavyShoes.jpg Boots
  • Red, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle.
  • Boots are lace-less.
  • The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.
  • There are no markings or labels from the shoe makers.
  • Boot soles are flat.
  • Boot soles are colored grey.
  • The armor is weathered with shades of grey.



Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.



DC15 carbine.jpg DC-15S Blaster

Manufactured by BlasTech Industries, the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the “A” model, it is easier to handle with a higher rate of fire and features a folding stock for braced firing.

  • Realistic Clone Style DC-15S Blaster.
  • Blaster may be scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Wire frame sight.
    • Folding stock.
    • Twelve radiator fins evenly spaced along the length of barrel.
    • Igniter detail knobs.
    • Charge magazine clip on right side.
  • Total length is approximately 26 inches (66 cm).
  • Because of the scale, the Hasbro version is incorrect.


OPTIONAL Level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter knobs have some copper coloring.
  • Blaster is weathered.
OPTIONAL Level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.




DC15 rifle.jpg DC-15A Blaster Rifle

Manufactured by BlasTech Industries, the DC-15A is a Tibanna gas cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets.

  • Realistic Clone Style DC-15A Blaster Rifle.
  • Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Flip up sight in down position.
    • Ten radiator fins are evenly spaced along the length of the barrel.
    • Power setting adjuster detail lever.
    • Sniper Scope attached under rifle in storage position.
    • Charge magazine clip on left side.
    • Igniter detail knobs.
  • Total length is approximately 55 inches (139.7 cm).
  • Because of the scale, the Hasbro version is not allowed.


OPTIONAL Level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter has some copper coloring.
  • Power setting adjuster detail lever is metal or gun metal grey.
  • Sniper scope is metal or gun metal grey.
  • Blaster is weathered.
OPTIONAL Level three certification (if applicable):
  • Functioning Blue LED is installed in barrel.






This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:CT_BF2_CG_Heavy&oldid=42838"