Costuming:ID juno eclipse rogue shadow

From 501st Legion Databank
crlblackhd.gif
 
Juno Eclipse, Rogue Shadow
Juno Eclipse Rogue Shadow.jpg
Model Juno Eclipse, Rogue Shadow, Photo by Unknown
 
Visit the Gallery for this Costume for more models and parts views.


Imperial-Officer-Corps.png

Description: Juno Eclipse, Rogue Shadow
Prefix: ID
Detachment: Imperial Officer Corps
Context: The Force Unleashed

Having been a skilled TIE pilot who led Vader's Black Eight Squadron, the Dark Lord appointed Captain Juno Eclipse as the pilot of the vessel "Rogue Shadow", an advanced technology ship primarily designed for stealth and infiltration purposes. Although uncertain of the nature of her missions, Eclipse welcomed the opportunity to fly such a unique starship.


For 501st membership only the requirements in black need to be met.

The Imperial Officer Corps defines additional, optional levels of costuming excellence. In the page below, requirements for Level 2 “Executor” are listed in blue. Requirements for Level 3 “Imperator” are listed in red.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Required Costume Components

The following costume components are present and appear as described below.


ID hat black.jpg Imperial Hat, black
  • Fabric is a medium weight black suiting material matching the pants and tunic.
  • Base of the hat is conical, with a crown approximately 4" (101.6 mm) tall.
  • Front and rear "flaps" overlap on the sides and are approximately 4" (101.6 mm) high.
  • Front bill extends approximately 3" down
  • Front bill may be decorated with concentric stitches, but this is not required.
  • Imperial Code Disk is positioned in the center of the front vertical flap; disk may be notched or notchless.
  • Dimensions of the hat are are relative and proportional to the costumer.


OPTIONAL Level two certification (if applicable):
  • Code Disk has no notch detail.



ID juno hair.jpg Hair Style
  • Hair is blonde; achieved via natural hair color or a naturally styled wig.
  • Worn in a French twist with tendrils framing each side of the face.


OPTIONAL Level two certification (if applicable):
  • Hair is pale to platinum blonde.



Juno Shirt.jpg Grey Tank Top
  • Light to medium grey tank top style undershirt worn under the tunic.
  • Undershirt has a straight or slightly rounded neck.


OPTIONAL Level two certification (if applicable):
  • Undershirt is light grey.



ID juno gloves.jpg Gloves
  • Open back, full-fingered driver gloves of leather or leather like material.



Juno Tunic.jpg Jacket/ Tunic
  • Jacket is made of black medium weight suiting material.
  • Jacket has a high collar.
  • Breast panels present but folded back (or made to give the appearance of being folded back.
  • 3/4-length sleeves
  • Two princess seams or a center seam in the back to allow snug fit may be present, but are not required.
  • Jacket length is such that the bottom edge stops right where the top of the trousers start.


OPTIONAL Level two certification (if applicable):
  • Tunic is neat and snugly fitted to the costumer.
  • There is no top-stitching visible anywhere.
  • There is a lining sewn in.



ID juno rank.jpg Rank Bar
  • Worn on the left side of the tunic over the heart.
  • Rank consists of colored plastic tiles mounted on metal or metal like bar.
  • Rank tiles are 4 amber and 2 red (from left to right), made of some type of plastic (i.e. plexiglass, acrylic, etc.)
  • Yellow tiles are not acceptable.
  • Rank tile dimensions are approx. 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm).
  • Tiles are mounted with approx. 1/4" (6.4 mm) spaces between them.


OPTIONAL Level two certification (if applicable):
  • Rank bar dimensions are relative to the costumer (i.e. not excessively large, or too small for the person’s frame).
OPTIONAL Level three certification (if applicable):
  • Rank consists of colored plastic push buttons mounted on a metal bar.



Code Cylinders02.jpg Code Cylinders
  • (2) code cylinders, are worn, one on each side of the tunic.
  • Three styles of code cylinder are permitted, but the two cylinders worn must match each other:
    • Modified Calk Holder: Silver "chalk holder" tube with a short clip. Top is colored Blue.
    • Dosimeter Style: True Dosimeter with correct clip and Blue top.
    • Alternate Style: Silver clip with no blue top.



ID belt.jpg Belt
  • The belt is constructed from a non-textured leather or a leather-like material.
  • Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
  • There are no loops on the belt.
  • A single large snap or rivet approximately 1" (25.4 mm) from the buckle is permitted but not required.
    • If present, the belt may be worn with the snap to the right or left of the wearer.
  • The buckle is constructed from a horizontally brushed metal, or metal looking material.
  • The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with gently rounded corners.
  • Buckle is adorned with an Imperial Code Disk at the center, which may be notched or notchless.


OPTIONAL Level two certification (if applicable):
  • Belt is worn so that the top of the belt is exactly flush with the top of the trousers.
OPTIONAL Level three certification (if applicable):
  • Belt is made of leather.



Juno Trousers.jpg Trousers
  • Fitted black trousers matching the same shade of black as the jacket and hat.
  • May be made from a stretch material or from the same fabric as the jacket.


OPTIONAL Level two certification (if applicable):
  • Trousers are worn low on the hips.
  • Trousers are tightly fitted to the costumer with no visible pockets.



ID Officer Boots.jpg Officer Boots
  • Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material.
  • There are no buckles, snap tabs or decoration.
  • Boots have conservative heels.
  • A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft.
    • Not visible from the front, side or back.
  • The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.


OPTIONAL Level two certification (if applicable):
  • Boots do not have stretch panels or a zipper.
OPTIONAL Level three certification (if applicable):
  • Boots are made of leather.
    • Not vinyl or PVC.
  • Exact replicas of English riding (dress) boots or Equestrian boots.






This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:ID_juno_eclipse_rogue_shadow&oldid=33326"