Costuming:ID sith eternal

From 501st Legion Databank
crlblackhd.gif
 
Sith Eternal Officer
Sith eternal model.png
Model ID-40970, Photo by Stephanie Reid


Imperial-Officer-Corps.png

Description: Sith Eternal / Final Order Officer
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars: The Rise of Skywalker
Officers in the High Command of the Final Order, raised on the planet Exegol by the Sith Eternal cultists who revered the dark side of the Force and were devoted to the Sith religion.


For 501st membership only the requirements in black need to be met.

The Imperial Officer Corps defines additional, optional levels of costuming excellence. In the page below, requirements for Level 2 “Executor” are listed in blue. Requirements for Level 3 “Imperator” are listed in red.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Required Costume Components

The following costume components are present and appear as described below.


Sith eternal hat.png Hat
  • The front brim is a shiny black patent leather-like material. It is curved and does not obscure the wearer’s eyes.
  • The brim should attach to the hat body to present smooth curves at the sides, aligning with the back flap.
  • The visible sides of the crown have an appearance of ribbed black leather, rubber, or similar material.
  • Base of the hat is conical, with a crown approximately 4 inches (100mm) tall.
  • Hat is roughly cone-shaped with a flat crown.
  • Front and rear flaps and top of the crown are of a black medium weight suiting material matching the pants and tunic.
  • Front and rear flaps overlap on the sides with the back flap’s ends overlapping the front’s where they attach to the body of the hat.
  • Front flap is approximately 0.5 to 1 inch (12–25mm) higher than the top of the crown, and crisp and smooth in appearance.
    • The front flap is vertical with a tilt outwards around the sides of the hat.
    • Rear flap is vertical with a tilt outwards around the sides and back.
  • Sith Code Disk is metal or metal appearance and is positioned at the center of the front vertical flap.


OPTIONAL Level two certification (if applicable):
  • The ribbed portions of the hat should match the ribbing of the neck seal and have a sheen to it.



Sith eternal Tunic.png Tunic
  • Fabric is a black, medium weight suiting, exactly matching the pants.
  • The closure is at the center front using a zipper with concealed teeth, surrounded by visible red material approximately 3–5mm wide.
  • There is red ribbon or similar approximately 0.125 to 0.25 inches (3–5mm) wide, crossing the chest from each side and angling slightly down to meet in the center of the tunic, combining with the center closure to form a flattened ‘Y’ shape when worn.
  • The sleeves are long and end at the wrist.
  • The tunic is fitted to the body with a shoulder yoke across the back.
  • There is no vent in the back of the tunic.
  • A vertical dart on each side of the front may extend up from the waist under the belt, stopping approximately mid chest, if needed to accommodate body curvature.
  • Rank band insignia is attached on the left arm approximately one-third of the distance from the elbow to the wrist.
  • A V-shaped separate chest yoke is attached to the top and front of the tunic, extending up from directly above the red lines. It is the same fabric as the tunic, with smooth, semi-rigid construction.
  • The Chest Yoke follows the neck curvature and extends to cover the top of the shoulders with faux epaulettes atop the shoulder, and ending at the back of the epaulettes atop the shoulder.
  • The Chest Yoke attaches in a seamless, flush, invisible manner.


OPTIONAL Level two certification (if applicable):
  • The tunic’s yoke across the back shall intersect the arm-hole seams approximately one-third of the way down the arms from the top.
  • There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
  • The chest and back yokes are rigid.
OPTIONAL Level three certification (if applicable):
  • There is a lining sewn in.



TK anh stunt neckseal.jpeg Neck Seal
  • The Neck Seal shall have an appearance of ribbed black leather, rubber, or similar material.
  • The Neck Seal is fitted to the wearer under the jacket, with horizontal ribs.
  • The ribbed material extends from the base of the neck to just under the chin, to conceal the entire neck.


OPTIONAL Level two certification (if applicable):
  • The neck seal shall have a sheen and be of the same size and style as the ribbing in the hat.



Sith eternal badge.png Chest Rank Bar
  • A plain metal rectangle with radiused half-circles on the long ends, approximately 2.5 inches (63.5mm) long by 0.375 inches (10mm) width and 0.125 inches (3mm) thick.
  • Bar is attached flush to the tunic by concealed means.



Sith eternal Belt.png Belt, Sith Officer
  • The belt is constructed from a rubber or rubber-like material with horizontal ribbing.
  • Belt is approximately 2.5 inches to 3 inches (63.5–76.2mm) in width, and should match the height of the belt buckle.
  • There are no loops on the belt.
  • Belt fits snugly over the natural waist of the wearer, covering the horizontal tunic seam, if present.
  • The buckle is constructed from metal, or metal looking material.
  • The buckle size is approximately 2.625 inches (66.7mm) high and 4.125 inches (104.5mm) wide with rounded corners.
  • Sith Code Disk is metal or metal appearance and is positioned at the center of the buckle.


OPTIONAL Level two certification (if applicable):
  • Buckle has a satin finish, not brushed.
  • Corners are more rounded than Imperial Officer buckles from the original trilogy.



ID Hux gloves.png Gloves, Sith Officer, Black
  • Gloves are constructed of a non-textured, black leather or leather-like material.
  • Gloves have enclosed fingers, are fitted, and worn underneath the sleeves.
  • Gloves are long enough to cover the wrist entirely.
  • No visible buckles, straps, or ornamentation.
  • Gloves may be plain or have three lines of stitching on the back of the hand.


OPTIONAL Level two certification (if applicable):
  • Gloves have three lines of stitching on the back of the hand.



Sith eternal rank.png Rank Insignia Band, Sith Officer
  • Worn on the left side of arm, above the wrist and below the elbow, approximately one-third of the distance from the elbow to the wrist.
  • Rank consists of one black band sewn down to the sleeve with raised red Aurebesh writing on it. The edges utilize piping or an embroidered line on each side.
    • For the Captain rank, the Aurebesh spells “STELS”.
    • Additional rank options and corresponding Aurebesh shall be added as discovered from licensed sources.
  • Both piping (if used) and embroidery (Aurabesh and lines) are red in color, close in color to the red used on the tunic stripes.



Sith eternal pants.png Jodhpur Pants
  • Fabric is a black, medium weight suiting, exactly matching the tunic.
  • Flared riding breeches have semi-stiff flares in the hip/thigh area, below the tunic and above the knee.
    • Pockets and waist belts are acceptable, but are not visible when the tunic is worn.
  • Flares are sharply triangular in shape and fit snugly at the knee.



ID Hux boots.jpg Officer Boots, Sith Officer
  • Knee-high, black, lace-less, smooth, non-textured, leather or leather-like material, with moderate to high-gloss shine.
  • There are no stretch panels, snap tabs or decoration, other than the adjustment buckle at the top, if present.
  • Boot seams closely match screen-used boots.
  • Soles are flat.
  • If zippers are present, they are on the inner part of the boot shaft.


OPTIONAL Level two certification (if applicable):
  • Boots have a top strap and buckle on the outside of the boots.
  • The straps are set slightly to the rear with the tabs facing the rear.






This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:ID_sith_eternal&oldid=39734"