|
|
|
| Pre Vizsla (CW Season 4/Season 5)
|
|
Model MW-8780, Photo by Priscilla Di Toma
|
|
|
| Visit the Gallery for this Costume for more models and parts views.
|
|
|
|
Description: Pre Vizsla (CW Season 4/Season 5)
Prefix: MW
Detachment: Bounty Hunters Guild
Context: The Clone Wars: Season 4/5
|
|
|
|
For 501st membership, only the requirements in black need to be met.
The Bounty Hunters’ Guild defines an additional optional level of costuming excellence. In the page below, requirements for Level 2, referred to as “Infamous”, are listed in blue. These optional requirements are meant for those who strive to meet the highest level of screen accuracy. Please visit the BHG web site for a full description of these standards.
|
|
|
This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
- This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
- GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
- Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
- Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
- Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.
|
|
|
|
Helmet
- Special designed mando helmet. the T visor has pointed ends at eye-height.
- On the sides of the helmet there are 2 rotating discs with attached cannons
- Right side has 2 cannons. a Front cannon painted matte black and a back cannon (higher than the fron one) painted in silver/ gray. The front cannon has a ridged detail near the attachment point to the side disc. The back cannon has a ridged detail near the top
- Left side has only 1 cannon, a front cannon. It is painted in matte black and has a ridged detail at the top of it
- Side discs are painted in silver with dark gray weathering
- Helmet has matte black dome with yellow-ish clan vizsla logo on the front, dark green cheeks with silver/dark gray protruding details
- The area around the visor is silver/dark gray and that area goes around the helmet
- The vent area in the back of the helmet is silver/dark gray while the area surrounding it is dark green
|
|
|
|
Flight Suit
- Olive Green Flighsuit
- Has traditional Mandalorian style double sleeves.
- Neck seal should be build into the suit.
- No pockets should be visible.
- Can be weathered
|
|
|
|
Vest
- Mandalorian Flak vest “Jango Fett Style”
- Color should be Olive Green/blue
- Shoulders should flare outward like wings
|
|
|
|
Chest Armor
- Consists of collar armor, left and right breast plates, a center diamond and an abdominal plate.
- Must be made of a solid material such as fiberglass, styrene or sintra.
- Must have dimension and give the feeling of thickness and depth.
- The plates are painted in Silver/ Dark Gray and they have a chest logo painted in different layers of color. First layer should be light yellow and covered in light blue.
- Left breast plate must have two indented horizontal bars each colored dark gray with pruple-ish shades
- Center diamond plate between breast plates must have a raised vertical rectangle as shown in visual references.
- The diamond is the same color of the other pieces.
- The raised rectangle is dark green.
- Must attach securely to the front of the vest
|
|
|
|
Shoulder Armor
- Must have dimension and give the feeling of thickness and depth.
- Shoulder silver/dark gray to match the collar.
- Shoulder armor should flare out off the shoulders to present a wider than normal silhouette.
|
|
|
|
Left Gauntlet
- Gauntlet color is Med/dark Gray.
- Gauntlets taper toward the wrist.
- Gauntlets have a seam on the inside of the arm with indents on either side of the seam as shown.
- Gauntlets have a stepped detail on the top center as shown.
- 2 cannons painted light gray.
- Looking at it from the top, there are 4 red rectangles (They represent lights) , 1 white rectangle (It represent a light) and one red trapezoid area (targeting device).
- Below and on the sides of the cannons there are details used as Disc blades launchers.
- The Gauntlet closes in the inside of the arm.
|
|
|
|
Right Gauntlet
- Gauntlet color is Med/dark Gray.
- Gauntlets taper toward the wrist.
- Gauntlets have a seam on the inside of the arm with indents on either side of the seam as shown.
- Gauntlets have a stepped detail on the top center as shown.
- 1 cannon painted light gray
- 4 small darts launcher with darts (gray) neck lasso launcher.
- The neck lasso discs are light gray/silver with a smaller red circle.
- Instead of the neck lasso discs, he has a retractable blade (Season 5 Only)
- Looking at it from the top, there are 2 rows of painted rectangles. The first row is at top layer level and it is made of 3 red rectangles representing lights. the second row is on a higher level and it is made of 3 rectangles. one gray, one white and 2 red.
- The Gauntlet closes in the inside of the arm.
|
|
|
|
Gloves
- Olive Green over the wrist gloves made of leather, nylon, or other low pile fabrics.
- Gloves cover any exposed skin.
- Gloves do not show any labels or logos when the armor is worn.
|
|
|
|
Hand Plates
- Must have dimension and give the feeling of thickness and depth.
- Symmetrical, tombstone shaped handplates.
- Color is Med/dark Gray to match helmet and armor.
|
|
|
|
Back Plate
- Must have dimension and give the feeling of thickness and depth.
- Color is dark grey to match gauntlets.
- Collar and backplate do not overlap.
|
|
|
|
Girth Belt
- Green-ish leather or leather like material, Fabric as well.
- 6-8" tall depending on the height of the wearer.
|
|
|
|
Belt
- Segmented belt worn outside of the girth belt.
- Plate size/positioning must match visual reference.
- Color is Med/dark Gray to match helmet and armor.
- It has Goldish-yellow squares on left and right side
- The center detail is painted with a lighter gray tone
- Belt has 2 boxes painted in med/dark gray with light gray button. (Season 4 Only)
- Boxes can be made openable.
- The belt goes all around the waist and it is usually closed on the back.
|
|
|
|
Codpiece
- Must have dimension and give the feeling of thickness and depth.
- Triangular cod piece with rounded bottom edge.
- Color is Med/dark Gray to match helmet and armor.
- It is usually tucked beneath the girth belt that covers its upper end.
|
|
|
|
Thigh Armor & Holsters
- Must have dimension and give the feeling of thickness and depth.
- Wraps around outer thigh.
- Holsters are integrated with the armor.
- Must have no visible straps / attachment.
- Color is Med/dark Gray.
|
|
|
|
Knee Armor
- Must have dimension and give the feeling of thickness and depth.
- Main color is Silver/ Dark Gray to match helmet and armor.
- Must attach securely to the front of the knees over the flightsuit with no straps or visible means of attachment.
- The 3D model of Vizsla Knee Plates have an Arch Indented Front. (Season 5 Only)
- Totally flat Knee Plates should be acceptable as well due to lot of pictures showing flat knee plates.
|
|
|
|
Shin Armor
- Must have dimension and give the feeling of thickness and depth.
- Color is Silver/ Dark Gray to match helmet and armor.
- Mando Style shinguards from ankle to mid leg.
- Only for season 5, there are Shin darts attachments. 3 launchers on top of the shin and 2 launchers on the bottom of the shin (Shin Darts - Season 5 only)
|
|
|
|
Boots
- Black with Silver and Beige Soles and Toe Caps.
- Boots have armor plates protecting the toes, the heel and the instep.
|
|
|
|
Boot Armor
- Must have dimension and give the feeling of thickness and depth.
- Color is Silver/ Dark Gray to match the armor
- Boot armor covers the top of the foot, hiding laces if present.
- Boot armor must connect with no visible means of attachment.
|
|
|
|
Jetpack
- TV series paint scheme jetpack is required for approval.
- Animated style sculpt required
- Paint scheme as shown.
- Custom style jetpack
- It is made in 5 main pieces.
1) Main Body
2) Left Tank
3) Right Tank
4) Rocket
5) Connection Tube with raised details
|
|
|
| Optional Accessories
|
|
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
|
|
|
|
Mandalorian Pistols
- Animated style pistols (Westar W-35) fit into thigh holsters
|
|
|
|
Dark Saber
- A hilt only may be carried on the back, in between the back plate and jetpack.
If a blade is present it should be black smoked acrylic with white details.
|
|
|
This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.
