Costuming:Scouttrooper jedifallenorder

From 501st Legion Databank
crlblackhd.gif
 
Scout Trooper: Jedi Fallen Order
TB jfoscout frontandback.png
Model TB-36000, Photo by Janice Yamamoto
 
Visit the Gallery for this Costume for more models and parts views.


Pathfinders.png

Description: Scout Trooper: Jedi Fallen Order
Prefix: TB
Detachment: PathFinders
Context: Star Wars Jedi: Fallen Order
Imperial Scout Troopers are specially trained Stormtroopers in service to the Galactic Empire for a range of missions. They are equipped with light armor for greater mobility and specialized helmets that allow for greater adaptability. Armed with electro riot batons when blasters are identified as insufficient, they are especially skilled in melee combat, crowd control, and defense against a lightsaber.



This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Required Costume Components

The following costume components are present and appear as described below.



TB scout helmet.jpeg Helmet
  • Gloss white or semi-gloss and may be lightly weathered.
  • Lens is black in color and obscures wearer’s eyes.
  • Decals are screen accurate.
  • Snout greeblie is medium gray and the aerator portion is painted black.
  • Inner edge of snout recess is black.
  • Bolts are either flat or have concave centers.
    • Bolts may be gray or white.
  • Helmet is true to the shape of original ROTJ Scout helmet.
  • A return edge is present on the visor.



Generic Balaclava.jpg Balaclava
  • Black headsock worn under helmet used to hide the wearer’s skin or facial hair.



TK anh stunt neckseal.jpeg Neck Seal
  • Black with horizontal ribs.
  • Conceals the entire neck.
  • Fitted to wearer.



TB jfoscout flightsuit.png Flight Suit
  • The undersuit is a one or two-piece black textile suit, such as military flightsuits, motorcycle racing suits, industrial work clothing (Red Kap/Dickies), or similar suits modified appropriately.
  • The suit is free of any visible pockets, labels, logos or zippers.



TB scout shoulders.jpeg Shoulder Armor
  • Gloss white or semi-gloss and may be lightly weathered.
  • These pieces are free of any adornment.



TB scout biceps.jpeg Upper Arm Armor
  • Gloss white or semi-gloss and may be lightly weathered.
  • Armor has a recessed area with a “t-bit” detail attached within.



TB scout forearms.jpeg Forearm Armor
  • Gloss white or semi-gloss and may be lightly weathered.
  • Secured to forearm with a black elastic strap.



TB jfoscout gloves.png Gloves
  • Black leather and gauntlet length.
  • Glove details include:
    • Black suede or faux suede patches on top of the middle finger, index finger and thumb.
    • Four tightly spaced ribs that span the knuckles.
  • No labels/logos, clips, or external straps.
  • Right glove has knuckle plate over ribbed area attached by pair of red wire/tubes to secondary port plate on wrist area.
  • Knuckle plate and secondary port plate give the illusion of metal or are gun-metal colored.



TB scout chest.jpeg Chest Armor
  • Gloss white or semi-gloss and may be lightly weathered.
  • There is a recessed rectangular area present over the right breast that is painted a medium to dark gray.
  • The chest and back armor join together over the shoulder and the gap is covered with a strip of white fabric (the “shoulder bridge”).
  • The sides of the chest armor attach to the back armor with white webbing.



TB jfoscout backarmor.png Back Armor
  • Gloss white or semi-gloss and may be lightly weathered.
  • The back armor has a center tank attached.
  • The top of the tank is flat with a detail piece painted black.
    • Top detail piece has the same greeblies as seen in game.
    • A thick red line runs perpendicular across the “dial”.
  • The tank has a black stripe detail.
    • The center of tank has a trapezoid shaped detail above the black stripe.
    • Trapezoid detail may either be a decal or notched into the tank.
  • “Rank bars” present on the right side of the tank number 4 stripes.



TB jfoscout bund.png Cummerbund and Codpiece
  • Cummerbund
    • Made from white fabric and may be lightly weathered.
    • Closure in back is right-over-left.
    • Extends from just under the chest armor down to the belt.
    • Evenly spaced vertical stitches go from the front to the wearer’s sides, approximately 20 ribs in total.
  • Codpiece
    • Tapered codpiece has a sewn inverted curve detail.
    • Black elastic strap connects codpiece between the legs to either the back of the cummerbund or flightsuit.



TB jfoscout harness.png Harness
  • Two black shoulder straps that connect to a wider torso strap that buckles closed across the front of the wearer.
  • Straps are padded at the shoulders and along the wearer’s flanks.
  • The rear torso strap attaches to a large battery with two loops around either end of the battery.
  • 1 pair of orange-red wires runs from the battery, up the right strap of the harness and through both loops of the shoulder padding down into the control box.
  • 1 pair of orange-red wires split off from the main pair of wires before the rear shoulder pad loop and runs down the wearer’s right arm into the wearer’s glove.



TB jfoscout battery.png Battery Pack
  • Gloss white or semi-gloss and may be lightly weathered.
  • Cylinder shaped with central radiator that has 8 veins that are black in color.
  • Sits inside padded webbing cradle at lower back above Thermal Detonator, fastened by two webbing loops on either end of the battery.
  • Left side detail area has two rings:
    • A larger ring toward center of battery.
    • A smaller ring towards left end with smaller “spout” protrusion.
  • Left side rings are connected by 8 fins.
  • Black detail cap on left side with hollow center.
  • Right side has rectangular box with semi-circular cut-out for riot baton.
  • Top right side of battery has small circular area with black connector hole for wires.



TB jfoscout baton.png Riot Baton
  • Semi-gloss black main body.
  • Silver or gun-metal colored telescoping end with larger tip area.
  • Tip has 2 small “teeth” on end and two sets of 4 venting holes.
  • Main body end has detailed area with copper colored ring.
  • Center control area consists of front button assembly.
    • Two small silver buttons.
    • One large black button.
  • Protruding button housing with one round gray button on outer side.
  • Central ring has single dial with silver “screw” head.
  • Bottom half of baton consists of knurled grip with single large black protruding button.
  • Bottom end is tapered to smaller end.
  • “T” shaped detail greeblie on bottom end.
  • See the Gallery for close up images of the greeblies.



TB jfoscout controlbox.png Control Box
  • The control box is a square plastic box with 8 raised ridges across the top and halfway down the front.
  • The lower front of the box is white.
  • Three rectangular red or mirror-finished buttons run down the front left.
  • Small beveled opening is below the 3 buttons.
  • The bottom center-right of the box is a large indent, rectangular in shape with beveled sides.
  • Three large and two small buttons inside bottom center-right large indent area.



TB jfoscout belt.png Belt
  • Gloss white or semi-gloss and may be lightly weathered.
  • The belt fastener is made from black leather-like material.
  • Two plastic hip boxes (“drop boxes”) hang from the sides of the belt.
  • Drop boxes connect to the belt via white webbing straps.
  • 4 black parachute buckles attach to the drop box straps, one on either side of the drop box.



TB jfoscout td.png Thermal Detonator
  • Thermal detonator box with a short gray hose that protrudes evenly from both ends.
    • Hose is either corrugated or wire-wrapped.
    • Hose is painted medium to light gray.
    • Hoses are capped off on both sides with two white, circular caps with concave centers.
  • On either end of hose is a black drill-style belt clip used to attach detonator to main belt.
  • The correct thermal detonator greeblies are attached to the box.
    • The rectangular thermal detonator greeblie, fixed on the right side of the detonator, is the same as used in the rebel Endor trooper rank badge.
    • The prongs on the rectangular greeblie point up.
    • On the left side is the same round greeblie as used on the Scout tank topper.
  • Detonator box is gloss white or semi-gloss and may be lightly weathered.



TB jfoscout knees.png Knee Armor
  • Gloss white or semi-gloss and may be lightly weathered.
  • Black elastic is used to secure the armor around the leg.



TB scout boots.jpeg Boots
  • White and may be lightly weathered.
  • The soles of the boot are tan.
  • A “dog bone” shaped strap covers the bridge of the foot.
  • Dog bones have double stitching along the rounded edges as seen in the game.
  • The boot shaft rises to just slightly underneath the bottom of the knee armor.
  • The boots are secured up the back with Velcro:
    • Left boot closure is left-over-right.
    • Right boot closure is right-over-left.




TB scout holster.jpeg Holster
  • Gloss white or semi-gloss and may be lightly weathered.
  • Attached to the outside of the right boot with rivets.




Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.



TB scout pistol.jpeg Hold-out Blaster
  • Flat or semi-gloss black and may be lightly weathered.
  • Blaster does not have any visible trigger.
  • The scope has lens discs cut into the scope for a more realistic appearance.



TB jfoscout pauldron.png Captain Pauldron
  • Orange colored pauldron may be worn on right shoulder.
  • May be lightly weathered.






This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:Scouttrooper_jedifallenorder&oldid=41921"