Jump to content

Datsun sidevalve engine

From Wikipedia, the free encyclopedia
Datsun Type 7/10 engine
Type 7 engine from a 1939 Datsun Type 17
Overview
Manufacturer
Layout
ConfigurationNaturally aspirated Inline-4
Displacement0.5–0.9 L; 30.2–52.5 cu in (495–860 cc)
Cylinder bore
  • 54 mm (2.13 in)
  • 55 mm (2.17 in)
  • 56 mm (2.20 in)
  • 60 mm (2.36 in)
Piston stroke
  • 54 mm (2.13 in)
  • 76 mm (2.99 in)
ValvetrainSide valve
Compression ratio8.0:1
Combustion
Fuel systemSingle Carburetor
Fuel typePetrol
Cooling systemWater-cooled
Output
Power output10–27 PS (7–20 kW)
Torque output48 N⋅m (35 lb⋅ft) (Type 10)
Chronology
SuccessorNissan C engine OHV

Nissan's sidevalve engines were based on the Austin 7 engine, with which they shared the 76 mm (2.99 in) stroke. The series began with a 495 cc iteration for the 1930 Datson Type 10 and ended with the 860 cc Type 10 engine which was built until 1964 for light commercial vehicles. Later versions were called the B-1, before being replaced in 1957 by the OHV Nissan C engine that was essentially a de-stroked version of another Austin design this time the BMC B-Series.

DAT 495 cc

[edit]

The displacement of the original version was kept beneath a half litre since driver's licenses were not required for such cars after a ministerial decision of 1930.[1] The engine was a square design, with a bore and stroke of 54 mm × 54 mm (2.13 in × 2.13 in). Maximum power was 10 PS (7.4 kW) at 3700 rpm.[2]

Applications

DAT 747 cc

[edit]

For 1933, the rule regarding drivers' licenses was changed so that cars of up to 750 cc could be driven without a license. Accordingly, Datsun modified their engine which now displaced 747 cc (0.7 L; 45.6 cu in) from a bore and stroke of 56 mm × 76 mm (2.20 in × 2.99 in). These dimensions are exactly the same as those of the Austin 7. It produced 12 PS (9 kW) at 3000 rpm, although this later increased to 14 PS (10 kW).

Type 7

[edit]

This 722 cc (0.7 L; 44.1 cu in) engine is a flat-head side valve automobile engine, a supposedly new design which was slightly smaller but also slightly more powerful than the earlier DAT engine. Bore and stroke were nearly the same as for the earlier version, at 55 mm × 76 mm (2.17 in × 2.99 in). Power is 15 PS (11.0 kW); in 1936 the engine was upgraded to produce 16 PS (11.8 kW). Postwar cars again claimed 15 PS (11.0 kW), at 3600 rpm.[3] In 1950, power was increased again, to 20 PS (14.7 kW).

Applications

Type 10

[edit]

The Datsun Type 10 engine was a 860 cc (0.9 L; 52.5 cu in) engine is a flat-head side valve automobile engine produced from 1952 through 1964. Bore and stroke was 60 mm × 76 mm (2.36 in × 2.99 in) in the undersquare British style. Later on, the engine's name was abbreviated to D-10.

Output was originally 20 PS (14.7 kW) for the DC-3, but this increased to 25 PS (18.4 kW) at 4000 rpm and 5.1 kg⋅m (50 N⋅m; 37 lb⋅ft) at 2400 rpm in 1953 thanks to an increased compression ratio of 6.5:1. The engine used a single carburetor. This engine was called the B-1 when installed in the 1958-1964 Datsun Cabstar; this version produces 27 PS (19.9 kW) at 5200 rpm.[4]

Applications

See also

[edit]

References

[edit]
  1. ^ "日産――ダットサンブランドの魂(1934年)" [Nissan: Datsun, the soul of the brand (1934)]. GAZOO.com (in Japanese). WebCG, Inc. 5 June 2015. Archived from the original on 1 April 2018.
  2. ^ "Datson 10". earlydatsun.com.
  3. ^ The New '49 Datsun Sedan (brochure) (in Japanese), Nissan Motor Corporation, 1949, p. 6
  4. ^ Bent, Alan. "1958 Datsun Cabstar A20". Earlydatsun.com. Archived from the original on 2016-03-16.