Jump to content

Screw piles

From Wikipedia, the free encyclopedia
photo of a stack of helical anchors at a construction site
Helical anchors

Screw piles, sometimes referred to as screw-piles, screw piers, screw anchors, screw foundations, ground screws, helical piles, helical piers, or helical anchors are a steel screw-in piling and ground anchoring system used for building deep foundations. Screw piles are typically manufactured from high-strength steel[1] using varying sizes of tubular hollow sections with helical flights.

The pile shaft transfers a structure's load into the pile. Helical steel plates are welded to the pile shaft to suit the site specific ground conditions. Helices can be press-formed to a specified pitch or simply consist of flat plates welded at a specified pitch to the pile's shaft. The number of helices, their diameters and position on the pile shaft as well as steel plate thickness are all determined by a combination of:

  1. The combined structure design load requirement
  2. The geotechnical parameters
  3. Environmental corrosion parameters
  4. The minimum design life of the structure being supported or restrained.

Screw pile steel shaft sections are subjected to design parameters and building codes standards for the region of manufacture.

The helices that are welded over the steel shaft are also called "helical flights" or just "flights", and can vary in size depending on soil conditions.

There are a few differences between helical anchors, helical piles and helical piers, although the terms are often used interchangeably. Helical anchors consist of an extendable steel shaft with helical bearing plates. Piles or piers refer to strong base elements that withstand or transfer vertical/horizontal loads. Anchors are piles utilised only in tension applications like restraining wall tiebacks or vertical ground anchors made to resist overturning forces.

Installation

[edit]

Piles are generally installed using standard tracked or wheeled excavators with a hydraulic torque motor attachment which monitors the torque achieved during installation to verify the design. Machinery varies from skid-steer loaders to 5 tonne through 80 tonne excavators. Rotary hydraulic powerheads with torque capacities ranging from 5,000 N⋅m to 500,000 N⋅m are custom fitted using various boom configurations. Special drive attachments connect the screw pile to the machine. Correct installation techniques are important to meet engineered design load and settlement outcomes. Incorrect techniques are likely to result in poor overall pile performance.

Development

[edit]
Line drawing of a short helical blade on a long shaft. The left end is labelled the "pile toe", near this end is the "screw or helix", and at the other end of the "pile shaft" are rectangular "drive lugs" and a small, circular "shear bar hole".
A screw pile

Screw piles were first described by the Irish civil engineer Alexander Mitchell in a paper in Civil Engineer and Architect's Journal in 1848; however, helical piles had been used for almost a decade by this point.[2] Screw foundations first appeared in the 1800s as pile foundations for lighthouses,[3] and were extensively used for piers in harbours. Between the 1850s through 1890s, more than 100 screw-pile lighthouses were erected on the east coast of the United States using screw piles. Made originally from cast or wrought iron, they had limited bearing and tension capacities.

More recently, composite technology has been developed and patented for use in small screw piles. Composites offer significant advantages over steel in small screw pile manufacture and installed performance.

Modern use and benefits

[edit]

Screw piles are used extensively, and their usage has extended from lighthouses to rail, telecommunications, roads, and numerous other industries where fast installation is required, or building work takes place close to existing structures.

Screw pile installations have also extended to residential applications, with many homeowners choosing a screw pile over other options. Some common applications for helical pile foundations include residential decks, sheds, cement pads, preformed stairs and grade beams.[4]

Modern screw pile design is based on standard structural and geotechnical principles. Screw pile designers typically use their own design software which has been developed through field testing of differing compression pile and tension anchor configurations in various soil profiles. Corrosion is addressed based on extended field trials, combined with worldwide databases on steel in ground corrosion. Typical helical piles with small-diameter pipes are able to restrain unfactored axial loads of up to 300 kN, uplift loads of up to 200 kN subject to the ground conditions and lateral loads of up to 25 kN.[5] Newest emerging screw piles with large-diameter shaft pipes, which require large equipment to install, can withstand loads in excess of 2500 kN.[6] Large load capacity screw piles may have various components such as flat half helices, Bisalloy cutting tips and helices, cap plates or rebar interfaces for connection to various concrete or steel structures.

Most industries use screw piling experts due to the cost efficiencies and, increasingly, the reduced environmental impact. "Screwing" the foundations into the ground means that there is less soil displacement so excess soil does not need to be transported from the site, saving on transportation costs and reducing the carbon footprint of the project.

The main benefits of screw pile include: shorter project times, ease of installation, little dependency on weather, ease of access, reduction of the carbon footprint, ease of removal when the foundations are no longer required, reusability, reduced risk to the workforce and reduced costs.

They are also suitable for both tensile and compression loads, so they are also used for masts, signs, and retaining structures.

References

[edit]
  1. ^ Mohajerani, Abbas; Bosnjak, Dusan; Bromwich, Damon (2016). "Analysis and design methods of screw piles: A review". Soils and Foundations. 56 (1). Elsevier BV: 115–128. doi:10.1016/j.sandf.2016.01.009. ISSN 0038-0806.
  2. ^ Howard A. Perko Helical Piles: A Practical Guide to Design and Installation John Wiley and Sons, 2009 ISBN 0-470-40479-5 pages 3–11.
  3. ^ William John Macquorn Rankine A manual of civil engineering, C. Griffin, 1876 pp. 605, 766.
  4. ^ "How Do Screw Piles Work?". Torsion Screw Piles.
  5. ^ "Helical / screw piles". Keller.
  6. ^ "HELICAL PILES / SCREW PILE FOUNDATION". TerraCana.