The American Practical Navigator/Chapter 3: Difference between revisions
m Removing redundant uses of "by" prefix in override_author per request at WS:BR#Remove "by" from use of override_author in headers |
|||
(22 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
{{header |
{{header |
||
| title = [[../|The American Practical Navigator]] |
| title = [[../|The American Practical Navigator]] |
||
| author = | override_author = |
| author = | override_author = the United States government |
||
| section = Chapter 3 |
| section = Chapter 3 |
||
| previous = [[../Chapter 2|Chapter 2]] |
| previous = [[../Chapter 2|Chapter 2]] |
||
| next = [[../Chapter 4|Chapter 4]] |
| next = [[../Chapter 4|Chapter 4]] |
||
| notes = '' '' |
| notes = '' '' |
||
{{c/s}}{{smallTOC |
|||
| title=Chapters |
| title=Chapters |
||
| sections=[[../Bowditch|Bowditch]], [[../Preface|Preface]], [[../|TOC]], |
| sections=[[../Bowditch|Bowditch]], [[../Preface|Preface]], [[../|TOC]], |
||
[[../Chapter 1|1]], [[../Chapter 2|2]], [[../Chapter 3|3]], [[../Chapter 4|4]], [[../Chapter 5|5]], [[../Chapter 6|6]], [[../Chapter 7|7]], [[../Chapter 8|8]], [[../Chapter 9|9]], [[../Chapter 10|10]], [[../Chapter 11|11]], [[../Chapter 12|12]], [[../Chapter 13|13]], [[../Chapter 14|14]], [[../Chapter 15|15]], [[../Chapter 16|16]], [[../Chapter 17|17]], [[../Chapter 18|18]], [[../Chapter 19|19]], [[../Chapter 20|20]], [[../Chapter 21|21]], [[../Chapter 22|22]], [[../Chapter 23|23]], [[../Chapter 24|24]], [[../Chapter 25|25]], [[../Chapter 26|26]], [[../Chapter 27|27]], [[../Chapter 28|28]], [[../Chapter 29|29]], [[../Chapter 30|30]], [[../Chapter 31|31]], [[../Chapter 32|32]], [[../Chapter 33|33]], [[../Chapter 34|34]], [[../Chapter 35|35]], [[../Chapter 36|36]], [[../Chapter 37|37]], [[../Glossary|Glossary]], [[../Acronyms|Acronyms]] |
[[../Chapter 1|1]], [[../Chapter 2|2]], [[../Chapter 3|3]], [[../Chapter 4|4]], [[../Chapter 5|5]], [[../Chapter 6|6]], [[../Chapter 7|7]], [[../Chapter 8|8]], [[../Chapter 9|9]], [[../Chapter 10|10]], [[../Chapter 11|11]], [[../Chapter 12|12]], [[../Chapter 13|13]], [[../Chapter 14|14]], [[../Chapter 15|15]], [[../Chapter 16|16]], [[../Chapter 17|17]], [[../Chapter 18|18]], [[../Chapter 19|19]], [[../Chapter 20|20]], [[../Chapter 21|21]], [[../Chapter 22|22]], [[../Chapter 23|23]], [[../Chapter 24|24]], [[../Chapter 25|25]], [[../Chapter 26|26]], [[../Chapter 27|27]], [[../Chapter 28|28]], [[../Chapter 29|29]], [[../Chapter 30|30]], [[../Chapter 31|31]], [[../Chapter 32|32]], [[../Chapter 33|33]], [[../Chapter 34|34]], [[../Chapter 35|35]], [[../Chapter 36|36]], [[../Chapter 37|37]], [[../Glossary|Glossary]], [[../Acronyms|Acronyms]] |
||
}} |
}}{{c/e}} |
||
}} |
}} |
||
=CHAPTER 3 - NAUTICAL CHARTS= |
=CHAPTER 3 - NAUTICAL CHARTS= |
||
{{nonumtoc}}__TOC__ |
|||
==CHART FUNDAMENTALS== |
==CHART FUNDAMENTALS== |
||
Line 158: | Line 158: | ||
showing the evening sky at various seasons of the year. |
showing the evening sky at various seasons of the year. |
||
See Figure 307. |
See Figure 307. |
||
[[File:APN2002-figure307.png|x400px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 307. A transverse Mercator map of the Western Hemisphere.</p> |
|||
=== 308. Universal Transverse Mercator (UTM) Grid === |
=== 308. Universal Transverse Mercator (UTM) Grid === |
||
Line 180: | Line 183: | ||
as the latitude changes. |
as the latitude changes. |
||
[[File:APN2002-figure309a.jpg|x300px|center]] |
|||
''Figure 307. A transverse Mercator map of the Western Hemisphere.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 309a. An oblique Mercator projection.</p> |
|||
[[File:APN2002-figure309b.png|300px|center]] |
|||
''Figure 309a. An oblique Mercator projection.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 309b. The fictitious graticule of an oblique Mercator projection.</p> |
|||
[[File:APN2002-figure309c.png|400px|center]] |
|||
''Figure 309b. The fictitious graticule of an oblique Mercator projection.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 309c. The great circle between Washington and Moscow as it appears on a Mercator map.</p> |
|||
[[File:APN2002-figure309d.png|400px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 309d. An oblique Mercator map based upon a cylinder tangent along the great circle through Washington and Moscow. The map includes an area 500 miles on each side of the great circle. The limits of this map are indicated on the Mercator map of Figure 309c.</p> |
|||
=== 310. Rectangular Projection === |
=== 310. Rectangular Projection === |
||
Line 225: | Line 234: | ||
the equator, the height reaches infinity and the cone be- |
the equator, the height reaches infinity and the cone be- |
||
''Figure 309c. The great circle between Washington and Moscow as it appears on a Mercator map.'' |
|||
''Figure 309d. An oblique Mercator map based upon a cylinder tangent along the great circle through Washington and Moscow. The map includes an area 500 miles on each side of the great circle. The limits of this map are indicated on the Mercator map of Figure 309c.'' |
|||
comes a cylinder. At the pole, its height is zero, and the |
comes a cylinder. At the pole, its height is zero, and the |
||
Line 258: | Line 264: | ||
map just such an area: the Mediterranean Sea. |
map just such an area: the Mediterranean Sea. |
||
[[File:APN2002-figure312a.png|300px|center]] |
|||
''Figure 312a. A simple conic projection.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 312a. A simple conic projection.</p> |
|||
[[File:APN2002-figure312b.png|300px|center]] |
|||
''Figure 312b. A simple conic map of the Northern Hemisphere.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 312b. A simple conic map of the Northern Hemisphere.</p> |
|||
=== 313. Lambert Conformal Projection === |
=== 313. Lambert Conformal Projection === |
||
Line 287: | Line 295: | ||
form of this projection has been used for polar charts, it has not |
form of this projection has been used for polar charts, it has not |
||
replaced the Mercator projection for marine navigation. |
replaced the Mercator projection for marine navigation. |
||
[[File:APN2002-figure313.png|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 313. A secant cone for a conic projection with two standard parallels.</p> |
|||
=== 314. Polyconic Projection === |
=== 314. Polyconic Projection === |
||
Line 349: | Line 360: | ||
as well as distances and areas, are very poorly represented, |
as well as distances and areas, are very poorly represented, |
||
except near the point of tangency. |
except near the point of tangency. |
||
''Figure 313. A secant cone for a conic projection with two standard parallels.'' |
|||
The usefulness of this projection rests upon the fact |
The usefulness of this projection rests upon the fact |
||
Line 366: | Line 375: | ||
line endpoints are quickly making this use of the gnomonic |
line endpoints are quickly making this use of the gnomonic |
||
chart obsolete. |
chart obsolete. |
||
[[File:APN2002-figure316a.png|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 316a. An oblique gnomonic projection.</p> |
|||
[[File:APN2002-figure316b.png|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 316b. An oblique gnomonic map with point of tangency at latitude 30°N, longitude 90°W.</p> |
|||
=== 317. Stereographic Projection === |
=== 317. Stereographic Projection === |
||
Line 380: | Line 395: | ||
excessive distortion (Figure 317b). As in other azimuthal |
excessive distortion (Figure 317b). As in other azimuthal |
||
''Figure 316a. An oblique gnomonic projection.'' |
|||
[[File:APN2002-figure317a.jpg|300px|center]] |
|||
''Figure 316b. An oblique gnomonic map with point of tangency at latitude 30°N, longitude 90°W.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 317a. An equatorial stereographic projection.</p> |
|||
[[File:APN2002-figure317b.png|300px|center]] |
|||
''Figure 317a. An equatorial stereographic projection.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 317b. A stereographic map of the Western Hemisphere.</p> |
|||
''Figure 317b. A stereographic map of the Western Hemisphere.'' |
|||
projections, great circles through the point of tangency appear |
projections, great circles through the point of tangency appear |
||
Line 412: | Line 426: | ||
of tangency would appear as a straight line and the one 90° |
of tangency would appear as a straight line and the one 90° |
||
away would appear as a circle (Figure 318b). |
away would appear as a circle (Figure 318b). |
||
[[File:APN2002-figure318a.png|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 318a. An equatorial orthographic projection.</p> |
|||
[[File:APN2002-figure318b.png|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 318b. An orthographic map of the Western Hemisphere.</p> |
|||
=== 319. Azimuthal Equidistant Projection === |
=== 319. Azimuthal Equidistant Projection === |
||
Line 428: | Line 449: | ||
is small, increasing with distance until shapes near the |
is small, increasing with distance until shapes near the |
||
opposite side of the earth are unrecognizable (Figure 319). |
opposite side of the earth are unrecognizable (Figure 319). |
||
[[File:APN2002-figure319.jpg|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 319. An azimuthal equidistant map of the world with the point of tangency latitude 40°N, longitude 100°W.</p> |
|||
The projection is useful because it combines the three |
The projection is useful because it combines the three |
||
Line 441: | Line 465: | ||
antenna can be determined easily. The projection is |
antenna can be determined easily. The projection is |
||
also used for polar charts and for the star finder, No. 2102D. |
also used for polar charts and for the star finder, No. 2102D. |
||
''Figure 318a. An equatorial orthographic projection.'' |
|||
''Figure 318b. An orthographic map of the Western Hemisphere.'' |
|||
== POLAR CHARTS == |
== POLAR CHARTS == |
||
Line 479: | Line 499: | ||
lines intersecting at the pole, and parallels are concentric |
lines intersecting at the pole, and parallels are concentric |
||
circles with their common center at the pole. Within a few |
circles with their common center at the pole. Within a few |
||
Figure 319. An azimuthal equidistant map of the world with the point of tangency latitude 40°N, longitude 100°W. |
|||
degrees of latitude of the pole they all look similar; however, |
degrees of latitude of the pole they all look similar; however, |
||
Line 492: | Line 511: | ||
with distance from the pole (Figure 320). All of these but |
with distance from the pole (Figure 320). All of these but |
||
the last are used for polar charts. |
the last are used for polar charts. |
||
[[File:APN2002-figure320.png|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 320. Expansion of polar azimuthal projections.</p> |
|||
=== 321. Selection of a Polar Projection === |
=== 321. Selection of a Polar Projection === |
||
Line 543: | Line 565: | ||
showing a large area such as a hemisphere because there is |
showing a large area such as a hemisphere because there is |
||
[[File:APN2002-figure321.png|300px|center]] |
|||
''Figure 320. Expansion of polar azimuthal projections.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 321. Polar stereographic projection.</p> |
|||
''Figure 321. Polar stereographic projection.'' |
|||
no expansion along the meridians. However, the projection |
no expansion along the meridians. However, the projection |
||
Line 753: | Line 774: | ||
sounder continuously and operate at a reduced speed. |
sounder continuously and operate at a reduced speed. |
||
[[File:APN2002-figure326a.png|300px|center]] |
|||
''Figure 326a. Part of a “boat sheet,” showing the soundings obtained in a survey.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 326a. Part of a “boat sheet,” showing the soundings obtained in a survey.</p> |
|||
[[File:APN2002-figure326b.png|300px|center]] |
|||
''Figure 326b. Part of a nautical chart made from the boat sheet of Figure 326a. Compare the number of soundings in the two figures.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 326b. Part of a nautical chart made from the boat sheet of Figure 326a. Compare the number of soundings in the two figures.</p> |
|||
Sparse sounding information does not necessarily indicate |
Sparse sounding information does not necessarily indicate |
||
Line 850: | Line 873: | ||
will list the date of surveys and other charts used in |
will list the date of surveys and other charts used in |
||
compilation. |
compilation. |
||
[[File:APN2002-figure328.png|500px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 328. A chart title block.</p> |
|||
=== 329. Shoreline === |
=== 329. Shoreline === |
||
Line 890: | Line 916: | ||
America are shown in Chart No. 1, Nautical Chart Symbols |
America are shown in Chart No. 1, Nautical Chart Symbols |
||
and Abbreviations. See Figure 330. |
and Abbreviations. See Figure 330. |
||
[[File:APN2002-figure330.jpg|300px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 330. Contents of U.S. Chart No. 1.</p> |
|||
Electronic chart symbols are, within programming and |
Electronic chart symbols are, within programming and |
||
Line 927: | Line 956: | ||
=== 331. Lettering === |
=== 331. Lettering === |
||
Except on some modified reproductions of foreign |
Except on some modified reproductions of foreign |
||
charts, cartographers have adopted certain lettering |
charts, cartographers have adopted certain lettering |
||
standards. Vertical type is used for features which are dry at |
|||
high water and not affected by movement of the water; slanting |
|||
BALTIC SEA |
|||
GERMANY—NORTH COAST |
|||
DAHMESHÖVED TO WISMAR |
|||
From German Surveys |
|||
SOUNDINGS IN METERS |
|||
reduced to the approximate level of Mean Sea Level |
|||
HEIGHTS IN METERS ABOVE MEAN SEA LEVEL |
|||
MERCATOR PROJECTION |
|||
EUROPEAN DATUM |
|||
SCALE 1:50,000 |
|||
''Figure 328. A chart title block.'' |
|||
''Figure 330. Contents of U.S. Chart No. 1.'' |
|||
dards. Vertical type is used for features which are dry at high |
|||
water and not affected by movement of the water; slanting |
|||
type is used for underwater and floating features. |
type is used for underwater and floating features. |
||
Line 1,348: | Line 1,361: | ||
=== 340. Miscellaneous Chart Features === |
=== 340. Miscellaneous Chart Features === |
||
A measured nautical mile indicated on a chart is accurate |
A measured nautical mile indicated on a chart is accurate |
||
to within 6 feet of the correct length. Most measured |
to within 6 feet of the correct length. Most measured |
||
Line 1,356: | Line 1,370: | ||
standard value by more than 6 feet, the actual measured distance |
standard value by more than 6 feet, the actual measured distance |
||
is stated and the words “measured mile” are omitted. |
is stated and the words “measured mile” are omitted. |
||
Periods after abbreviations in water areas are omitted |
Periods after abbreviations in water areas are omitted |
||
because these might be mistaken for rocks. However, a |
because these might be mistaken for rocks. However, a |
||
Line 1,363: | Line 1,378: | ||
charts when they are of value to the mariner either as landmarks |
charts when they are of value to the mariner either as landmarks |
||
or sources of direction-finding bearings. |
or sources of direction-finding bearings. |
||
Lines of demarcation between the areas in which international |
Lines of demarcation between the areas in which international |
||
and inland navigation rules apply are shown only |
and inland navigation rules apply are shown only |
||
Line 1,372: | Line 1,388: | ||
courses. The outer circle is graduated in degrees with zero |
courses. The outer circle is graduated in degrees with zero |
||
at true north. The inner circle indicates magnetic north. |
at true north. The inner circle indicates magnetic north. |
||
On many NIMA charts magnetic variation is given to |
On many NIMA charts magnetic variation is given to |
||
the nearest 1' by notes in the centers of compass roses. the |
the nearest 1' by notes in the centers of compass roses. the |
||
Line 1,397: | Line 1,414: | ||
According to tides and weather, conditions at any given |
According to tides and weather, conditions at any given |
||
time may differ considerably from those shown. |
time may differ considerably from those shown. |
||
Review chart notes carefully because they provide important |
Review chart notes carefully because they provide important |
||
information. Several types of notes are used. Those |
information. Several types of notes are used. Those |
||
Line 1,404: | Line 1,422: | ||
scale, sources of data, tidal information, soundings, and |
scale, sources of data, tidal information, soundings, and |
||
cautions. Another class of notes covers such topics as local |
cautions. Another class of notes covers such topics as local |
||
magnetic disturbance, controlling depths of channels, hazards |
magnetic disturbance, controlling depths of channels, hazards |
||
to navigation, and anchorages. |
|||
A datum note will show the geodetic datum of the chart |
A datum note will show the geodetic datum of the chart |
||
Line 1,411: | Line 1,430: | ||
instructions on plotting positions from the WGS 84 or NAD |
instructions on plotting positions from the WGS 84 or NAD |
||
83 datums on the chart if such a conversion is needed. |
83 datums on the chart if such a conversion is needed. |
||
Anchorage areas are labeled with a variety of magenta, |
Anchorage areas are labeled with a variety of magenta, |
||
black, or green lines depending on the status of the area. |
black, or green lines depending on the status of the area. |
||
Line 1,421: | Line 1,441: | ||
Spoil areas are tinted blue on NOS charts and labeled. |
Spoil areas are tinted blue on NOS charts and labeled. |
||
These areas contain no soundings and should be avoided. |
These areas contain no soundings and should be avoided. |
||
Firing and bombing practice areas in the United States |
Firing and bombing practice areas in the United States |
||
territorial and adjacent waters are shown on NOS and NIMA |
territorial and adjacent waters are shown on NOS and NIMA |
||
Line 1,433: | Line 1,454: | ||
prior to proceeding into a gunnery or missile firing area. |
prior to proceeding into a gunnery or missile firing area. |
||
Danger areas in effect for longer periods are published in the |
Danger areas in effect for longer periods are published in the |
||
Notice to Mariners. Any aid to navigation established to |
''Notice to Mariners''. Any aid to navigation established to |
||
mark a danger area or a fixed or floating target is shown on |
mark a danger area or a fixed or floating target is shown on |
||
charts. |
charts. |
||
Line 1,439: | Line 1,460: | ||
Traffic separation schemes are shown on standard nautical |
Traffic separation schemes are shown on standard nautical |
||
charts of scale 1:600,000 and larger and are printed in magenta. |
charts of scale 1:600,000 and larger and are printed in magenta. |
||
A logarithmic time-speed-distance nomogram with an |
A logarithmic time-speed-distance nomogram with an |
||
explanation of its application is shown on harbor charts. |
explanation of its application is shown on harbor charts. |
||
Tidal information boxes are shown on charts of scales |
Tidal information boxes are shown on charts of scales |
||
1:200,000 and larger for NOS charts, and various scales on |
1:200,000 and larger for NOS charts, and various scales on |
||
DMA charts, according to the source. See Figure 340a. |
DMA charts, according to the source. See Figure 340a. |
||
[[File:APN2002-figure340a.png|550px|center]] |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 340a. Tidal box.</p> |
|||
Tabulations of controlling depths are shown on some |
Tabulations of controlling depths are shown on some |
||
National Ocean Service harbor and coastal charts. See Figure |
National Ocean Service harbor and coastal charts. See Figure 340b. |
||
[[File:APN2002-figure340b.png|550px|center]] |
|||
340b. |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 340b. Tabulations of controlling depths.</p> |
|||
Study Chart No. 1 thoroughly to become familiar with |
Study Chart No. 1 thoroughly to become familiar with |
||
all the symbols used to depict the wide variety of features |
all the symbols used to depict the wide variety of features |
||
on nautical charts. |
on nautical charts. |
||
TIDAL INFORMATION |
|||
Place |
|||
Position |
|||
Height above datum of soundings |
|||
Mean High Water Mean Low Water |
|||
N. Lat. E. Long. Higher Lower Lower Higher |
|||
meters meters meters meters |
|||
Olongapo . . . . . . 14°49' 120°17' . . . 0.9 . . . . . . 0.4 . . . . . . 0.0 . . . . . . 0.3 . . . |
|||
Figure 340a. Tidal box. |
|||
NANTUCKET HARBOR |
|||
Tabulated from surveys by the Corps of Engineers - report of June 1972 |
|||
and surveys of Nov. 1971 |
|||
Controlling depths in channels entering from |
|||
seaward in feet at Mean Low Water Project Dimensions |
|||
Name of Channel |
|||
Left |
|||
outside |
|||
quarter |
|||
Middle |
|||
half of |
|||
channel |
|||
Right |
|||
outside |
|||
quarter |
|||
Date of |
|||
Survey Width (feet) |
|||
Length |
|||
(naut. |
|||
miles) |
|||
Depth |
|||
M. L. W. |
|||
(feet) |
|||
Entrance Channel 11.1 15.0 15.0 11 - 71 300 1.2 15 |
|||
Note.-The Corps of Engineers should be consulted for changing conditions subsequent to the above. |
|||
''Figure 340b. Tabulations of controlling depths.'' |
|||
== REPRODUCTIONS OF FOREIGN CHARTS == |
== REPRODUCTIONS OF FOREIGN CHARTS == |
||
Line 1,655: | Line 1,645: | ||
in the catalog, and are not available to civilian navigators. |
in the catalog, and are not available to civilian navigators. |
||
[[File:APN2002-figure343a.png|300px|center]] |
|||
''Figure 343a. Ocean basins with region numbers.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 343a. Ocean basins with region numbers.</p> |
|||
[[File:APN2002-figure343b.png|300px|center]] |
|||
''Figure 343b. Regions and subregions of the nautical chart index.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 343b. Regions and subregions of the nautical chart index.</p> |
|||
[[File:APN2002-figure343c.png|300px|center]] |
|||
''Figure 343c. Chart coverage of Iceland, illustrating the sequence and direction of the U.S. chart numbering system.'' |
|||
<p {{ts|w75|ma|ac|fsi}}>Figure 343c. Chart coverage of Iceland, illustrating the sequence and direction of the U.S. chart numbering system.</p> |
|||
Combat charts have 6-digit numbers beginning with an “8.” Neither is available to civilian navigators. |
Combat charts have 6-digit numbers beginning with an “8.” Neither is available to civilian navigators. |
Latest revision as of 12:35, 21 February 2024
CHAPTER 3 - NAUTICAL CHARTS
[edit]CHART FUNDAMENTALS
[edit]300. Definitions
[edit]A nautical chart represents part of the spherical earth on a plane surface. It shows water depth, the shoreline of adjacent land, prominent topographic features, aids to navigation, and other navigational information. It is a work area on which the navigator plots courses, ascertains positions, and views the relationship of the ship to the surrounding area. It assists the navigator in avoiding dangers and arriving safely at his destination.
Originally hand-drawn on sheepskin, traditional nautical charts have for generations been printed on paper. Electronic charts consisting of a digital data base and a display system are in use and are replacing paper charts aboard many vessels. An electronic chart is not simply a digital version of a paper chart; it introduces a new navigation methodology with capabilities and limitations very different from paper charts. The electronic chart is the legal equivalent of the paper chart if it meets certain International Maritime Organization specifications. See Chapter 14 for a complete discussion of electronic charts.
Should a marine accident occur, the nautical chart in use at the time takes on legal significance. In cases of grounding, collision, and other accidents, charts become critical records for reconstructing the event and assigning liability. Charts used in reconstructing the incident can also have tremendous training value.
301. Projections
[edit]Because a cartographer cannot transfer a sphere to a flat surface without distortion, he must project the surface of a sphere onto a developable surface. A developable surface is one that can be flattened to form a plane. This process is known as chart projection. If points on the surface of the sphere are projected from a single point, the projection is said to be perspective or geometric.
As the use of electronic charts becomes increasingly widespread, it is important to remember that the same cartographic principles that apply to paper charts apply to their depiction on video screens.
302. Selecting a Projection
[edit]Each projection has certain preferable features. However, as the area covered by the chart becomes smaller, the differences between various projections become less noticeable. On the largest scale chart, such as of a harbor, all projections are practically identical. Some desirable properties of a projection are:
1. True shape of physical features 2. Correct angular relationships 3. Equal area (Represents areas in proper proportions) 4. Constant scale values 5. Great circles represented as straight lines 6. Rhumb lines represented as straight lines
Some of these properties are mutually exclusive. For example, a single projection cannot be both conformal and equal area. Similarly, both great circles and rhumb lines cannot be represented on a single projection as straight lines.
303. Types of Projections
[edit]The type of developable surface to which the spherical surface is transferred determines the projection’s classification. Further classification depends on whether the projection is centered on the equator (equatorial), a pole (polar), or some point or line between (oblique). The name of a projection indicates its type and its principal features. Mariners most frequently use a Mercator projection, classified as a cylindrical projection upon a plane, the cylinder tangent along the equator. Similarly, a projection based upon a cylinder tangent along a meridian is called transverse (or inverse) Mercator or transverse (or inverse) orthomorphic. The Mercator is the most common projection used in maritime navigation, primarily because rhumb lines plot as straight lines.
In a simple conic projection, points on the surface of the earth are transferred to a tangent cone. In the Lambert conformal projection, the cone intersects the earth (a secant cone) at two small circles. In a polyconic projection, a series of tangent cones is used.
In an azimuthal or zenithal projection, points on the earth are transferred directly to a plane. If the origin of the projecting rays is the center of the earth, a gnomonic projection results; if it is the point opposite the plane’s point of tangency, a stereographic projection; and if at infinity (the projecting lines being parallel to each other), an orthographic projection. The gnomonic, stereographic, and orthographic are perspective projections. In an azimuthal equidistant projection, which is not perspective, the scale of distances is constant along any radial line from the point of tangency. See Figure 303.
![](http://upload.wikimedia.org/wikipedia/commons/7/78/APN2002-figure303.png)
Figure 303. Azimuthal projections: A, gnomonic; B, stereographic; C, (at infinity) orthographic.
Cylindrical and plane projections are special conical projections, using heights infinity and zero, respectively.
A graticule is the network of latitude and longitude lines laid out in accordance with the principles of any projection.
304. Cylindrical Projections
[edit]If a cylinder is placed around the earth, tangent along the equator, and the planes of the meridians are extended, they intersect the cylinder in a number of vertical lines. See Figure 304. These parallel lines of projection are equidistant from each other, unlike the terrestrial meridians from which they are derived which converge as the latitude increases. On the earth, parallels of latitude are perpendicular to the meridians, forming circles of progressively smaller diameter as the latitude increases. On the cylinder they are shown perpendicular to the projected meridians, but because a cylinder is everywhere of the same diameter, the projected parallels are all the same size.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/01/APN2002-figure304.jpg/243px-APN2002-figure304.jpg)
Figure 304. A cylindrical projection.
If the cylinder is cut along a vertical line (a meridian) and spread out flat, the meridians appear as equally spaced vertical lines; and the parallels appear as horizontal lines. The parallels’ relative spacing differs in the various types of cylindrical projections.
If the cylinder is tangent along some great circle other than the equator, the projected pattern of latitude and longitude lines appears quite different from that described above, since the line of tangency and the equator no longer coincide. These projections are classified as oblique or transverse projections.
305. Mercator Projection
[edit]Navigators most often use the plane conformal projection known as the Mercator projection. The Mercator projection is not perspective, and its parallels can be derived mathematically as well as projected geometrically. Its distinguishing feature is that both the meridians and parallels are expanded at the same ratio with increased latitude. The expansion is equal to the secant of the latitude, with a small correction for the ellipticity of the earth. Since the secant of 90° is infinity, the projection cannot include the poles. Since the projection is conformal, expansion is the same in all directions and angles are correctly shown.
Rhumb lines appear as straight lines, the directions of which can be measured directly on the chart. Distances can also be measured directly if the spread of latitude is small. Great circles, except meridians and the equator, appear as curved lines concave to the equator. Small areas appear in their correct shape but of increased size unless they are near the equator.
306. Meridional Parts
[edit]At the equator a degree of longitude is approximately equal in length to a degree of latitude. As the distance from the equator increases, degrees of latitude remain approximately the same, while degrees of longitude become
progressively shorter. Since degrees of longitude appear everywhere the same length in the Mercator projection, it is necessary to increase the length of the meridians if the expansion is to be equal in all directions. Thus, to maintain the correct proportions between degrees of latitude and degrees of longitude, the degrees of latitude must be progressively longer as the distance from the equator increases. This is illustrated in Figure 306.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/54/APN2002-figure306.png/400px-APN2002-figure306.png)
Figure 306. A Mercator map of the world.
The length of a meridian, increased between the equator and any given latitude, expressed in minutes of arc at the equator as a unit, constitutes the number of meridional parts (M) corresponding to that latitude. Meridional parts, given in Table 6 for every minute of latitude from the equator to the pole, make it possible to construct a Mercator chart and to solve problems in Mercator sailing. These values are for the WGS ellipsoid of 1984.
307. Transverse Mercator Projections
[edit]Constructing a chart using Mercator principles, but with the cylinder tangent along a meridian, results in a transverse Mercator or transverse orthomorphic projection. The word “inverse” is used interchangeably with “transverse.” These projections use a fictitious graticule similar to, but offset from, the familiar network of meridians and parallels. The tangent great circle is the fictitious equator. Ninety degrees from it are two fictitious poles. A group of great circles through these poles and perpendicular to the tangent great circle are the fictitious meridians, while a series of circles parallel to the plane of the tangent great circle form the fictitious parallels. The actual meridians and parallels appear as curved lines.
A straight line on the transverse or oblique Mercator projection makes the same angle with all fictitious meridians, but not with the terrestrial meridians. It is therefore a fictitious rhumb line. Near the tangent great circle, a straight line closely approximates a great circle. The projection is most useful in this area. Since the area of minimum distortion is near a meridian, this projection is useful for charts covering a large band of latitude and extending a relatively short distance on each side of the tangent meridian. It is sometimes used for star charts showing the evening sky at various seasons of the year. See Figure 307.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/11/APN2002-figure307.png/234px-APN2002-figure307.png)
Figure 307. A transverse Mercator map of the Western Hemisphere.
308. Universal Transverse Mercator (UTM) Grid
[edit]The Universal Transverse Mercator (UTM) grid is a military grid superimposed upon a transverse Mercator graticule, or the representation of these grid lines upon any graticule. This grid system and these projections are often used for large-scale (harbor) nautical charts and military charts.
309. Oblique Mercator Projections
[edit]A Mercator projection in which the cylinder is tangent along a great circle other than the equator or a meridian is called an oblique Mercator or oblique orthomorphic projection. See Figure 309a and Figure 309b. This projection is used principally to depict an area in the near vicinity of an oblique great circle. Figure 309c, for example, shows the great circle joining Washington and Moscow. Figure 309d shows an oblique Mercator map with the great circle between these two centers as the tangent great circle or fictitious equator. The limits of the chart of Figure 309c are indicated in Figure 309d. Note the large variation in scale as the latitude changes.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/61/APN2002-figure309a.jpg/265px-APN2002-figure309a.jpg)
Figure 309a. An oblique Mercator projection.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/16/APN2002-figure309b.png/300px-APN2002-figure309b.png)
Figure 309b. The fictitious graticule of an oblique Mercator projection.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/52/APN2002-figure309c.png/400px-APN2002-figure309c.png)
Figure 309c. The great circle between Washington and Moscow as it appears on a Mercator map.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/39/APN2002-figure309d.png/400px-APN2002-figure309d.png)
Figure 309d. An oblique Mercator map based upon a cylinder tangent along the great circle through Washington and Moscow. The map includes an area 500 miles on each side of the great circle. The limits of this map are indicated on the Mercator map of Figure 309c.
310. Rectangular Projection
[edit]A cylindrical projection similar to the Mercator, but with uniform spacing of the parallels, is called a rectangular projection. It is convenient for graphically depicting information where distortion is not important. The principal navigational use of this projection is for the star chart of the Air Almanac, where positions of stars are plotted by rectangular coordinates representing declination (ordinate) and sidereal hour angle (abscissa). Since the meridians are parallel, the parallels of latitude (including the equator and the poles) are all represented by lines of equal length.
311. Conic Projections
[edit]A conic projection is produced by transferring points from the surface of the earth to a cone or series of cones. This cone is then cut along an element and spread out flat to form the chart. When the axis of the cone coincides with the axis of the earth, then the parallels appear as arcs of circles, and the meridians appear as either straight or curved lines converging toward the nearer pole. Limiting the area covered to that part of the cone near the surface of the earth limits distortion. A parallel along which there is no distortion is called a standard parallel. Neither the transverse conic projection, in which the axis of the cone is in the equatorial plane, nor the oblique conic projection, in which the axis of the cone is oblique to the plane of the equator, is ordinarily used for navigation. They are typically used for illustrative maps.
Using cones tangent at various parallels, a secant (intersecting) cone, or a series of cones varies the appearance and features of a conic projection.
312. Simple Conic Projection
[edit]A conic projection using a single tangent cone is a simple conic projection (Figure 312a). The height of the cone increases as the latitude of the tangent parallel decreases. At the equator, the height reaches infinity and the cone be-
comes a cylinder. At the pole, its height is zero, and the
cone becomes a plane. Similar to the Mercator projection,
the simple conic projection is not perspective since only the
meridians are projected geometrically, each becoming an
element of the cone. When this projection is spread out flat
to form a map, the meridians appear as straight lines converging
at the apex of the cone. The standard parallel,
where the cone is tangent to the earth, appears as the arc of
a circle with its center at the apex of the cone. The other
parallels are concentric circles. The distance along any meridian
between consecutive parallels is in correct relation to
the distance on the earth, and, therefore, can be derived
mathematically. The pole is represented by a circle (Figure
312b). The scale is correct along any meridian and along
the standard parallel. All other parallels are too great in
length, with the error increasing with increased distance
from the standard parallel. Since the scale is not the same in
all directions about every point, the projection is neither a
conformal nor equal-area projection. Its non-conformal nature
is its principal disadvantage for navigation.
Since the scale is correct along the standard parallel and varies uniformly on each side, with comparatively little distortion near the standard parallel, this projection is useful for mapping an area covering a large spread of longitude and a comparatively narrow band of latitude. It was developed by Claudius Ptolemy in the second century A.D. to map just such an area: the Mediterranean Sea.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/33/APN2002-figure312a.png/300px-APN2002-figure312a.png)
Figure 312a. A simple conic projection.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/62/APN2002-figure312b.png/300px-APN2002-figure312b.png)
Figure 312b. A simple conic map of the Northern Hemisphere.
313. Lambert Conformal Projection
[edit]The useful latitude range of the simple conic projection can be increased by using a secant cone intersecting the earth at two standard parallels. See Figure 313. The area between the two standard parallels is compressed, and that beyond is expanded. Such a projection is called either a secant conic or conic projection with two standard parallels.
If in such a projection the spacing of the parallels is altered, such that the distortion is the same along them as along the meridians, the projection becomes conformal. This modification produces the Lambert conformal projection. If the chart is not carried far beyond the standard parallels, and if these are not a great distance apart, the distortion over the entire chart is small.
A straight line on this projection so nearly approximates a great circle that the two are nearly identical. Radio beacon signals travel great circles; thus, they can be plotted on this projection without correction. This feature, gained without sacrificing conformality, has made this projection popular for aeronautical charts because aircraft make wide use of radio aids to navigation. Except in high latitudes, where a slightly modified form of this projection has been used for polar charts, it has not replaced the Mercator projection for marine navigation.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8d/APN2002-figure313.png/300px-APN2002-figure313.png)
Figure 313. A secant cone for a conic projection with two standard parallels.
314. Polyconic Projection
[edit]The latitude limitations of the secant conic projection can be minimized by using a series of cones. This results in a polyconic projection. In this projection, each parallel is the base of a tangent cone. At the edges of the chart, the area between parallels is expanded to eliminate gaps. The scale is correct along any parallel and along the central meridian of the projection. Along other meridians the scale increases with increased difference of longitude from the central meridian. Parallels appear as nonconcentric circles; meridians appear as curved lines converging toward the pole and concave to the central meridian.
The polyconic projection is widely used in atlases, particularly for areas of large range in latitude and reasonably large range in longitude, such as continents. However, since it is not conformal, this projection is not customarily used in navigation.
315. Azimuthal Projections
[edit]If points on the earth are projected directly to a plane surface, a map is formed at once, without cutting and flattening, or “developing.” This can be considered a special case of a conic projection in which the cone has zero height.
The simplest case of the azimuthal projection is one in which the plane is tangent at one of the poles. The meridians are straight lines intersecting at the pole, and the parallels are concentric circles with their common center at the pole. Their spacing depends upon the method used to transfer points from the earth to the plane.
If the plane is tangent at some point other than a pole, straight lines through the point of tangency are great circles, and concentric circles with their common center at the point of tangency connect points of equal distance from that point. Distortion, which is zero at the point of tangency, increases along any great circle through this point. Along any circle whose center is the point of tangency, the distortion is constant. The bearing of any point from the point of tangency is correctly represented. It is for this reason that these projections are called azimuthal. They are also called zenithal. Several of the common azimuthal projections are perspective.
316. Gnomonic Projection
[edit]If a plane is tangent to the earth, and points are projected geometrically from the center of the earth, the result is a gnomonic projection. See Figure 316a. Since the projection is perspective, it can be demonstrated by placing a light at the center of a transparent terrestrial globe and holding a flat surface tangent to the sphere.
In an oblique gnomonic projection the meridians appear as straight lines converging toward the nearer pole. The parallels, except the equator, appear as curves (Figure 316b). As in all azimuthal projections, bearings from the point of tangency are correctly represented. The distance scale, however, changes rapidly. The projection is neither conformal nor equal area. Distortion is so great that shapes, as well as distances and areas, are very poorly represented, except near the point of tangency.
The usefulness of this projection rests upon the fact that any great circle appears on the map as a straight line, giving charts made on this projection the common name great-circle charts.
Gnomonic charts are most often used for planning the great-circle track between points. Points along the determined track are then transferred to a Mercator projection. The great circle is then followed by following the rhumb lines from one point to the next. Computer programs which automatically calculate great circle routes between points and provide latitude and longitude of corresponding rhumb line endpoints are quickly making this use of the gnomonic chart obsolete.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/62/APN2002-figure316a.png/300px-APN2002-figure316a.png)
Figure 316a. An oblique gnomonic projection.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b2/APN2002-figure316b.png/300px-APN2002-figure316b.png)
Figure 316b. An oblique gnomonic map with point of tangency at latitude 30°N, longitude 90°W.
317. Stereographic Projection
[edit]A stereographic projection results from projecting points on the surface of the earth onto a tangent plane, from a point on the surface of the earth opposite the point of tangency (Figure 317a). This projection is also called an azimuthal orthomorphic projection.
The scale of the stereographic projection increases with distance from the point of tangency, but it increases more slowly than in the gnomonic projection. The stereographic projection can show an entire hemisphere without excessive distortion (Figure 317b). As in other azimuthal
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/5c/APN2002-figure317a.jpg/300px-APN2002-figure317a.jpg)
Figure 317a. An equatorial stereographic projection.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/eb/APN2002-figure317b.png/300px-APN2002-figure317b.png)
Figure 317b. A stereographic map of the Western Hemisphere.
projections, great circles through the point of tangency appear as straight lines. Other circles such as meridians and parallels appear as either circles or arcs of circles.
The principal navigational use of the stereographic projection is for charts of the polar regions and devices for mechanical or graphical solution of the navigational triangle. A Universal Polar Stereographic (UPS) grid, mathematically adjusted to the graticule, is used as a reference system.
318. Orthographic Projection
[edit]If terrestrial points are projected geometrically from infinity to a tangent plane, an orthographic projection results (Figure 318a). This projection is not conformal; nor does it result in an equal area representation. Its principal use is in navigational astronomy because it is useful for illustrating and solving the navigational triangle. It is also useful for illustrating celestial coordinates. If the plane is tangent at a point on the equator, the parallels (including the equator) appear as straight lines. The meridians would appear as ellipses, except that the meridian through the point of tangency would appear as a straight line and the one 90° away would appear as a circle (Figure 318b).
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/df/APN2002-figure318a.png/300px-APN2002-figure318a.png)
Figure 318a. An equatorial orthographic projection.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f0/APN2002-figure318b.png/300px-APN2002-figure318b.png)
Figure 318b. An orthographic map of the Western Hemisphere.
319. Azimuthal Equidistant Projection
[edit]An azimuthal equidistant projection is an azimuthal projection in which the distance scale along any great circle through the point of tangency is constant. If a pole is the point of tangency, the meridians appear as straight radial lines and the parallels as equally spaced concentric circles. If the plane is tangent at some point other than a pole, the concentric circles represent distances from the point of tangency. In this case, meridians and parallels appear as curves. The projection can be used to portray the entire earth, the point 180° from the point of tangency appearing as the largest of the concentric circles. The projection is not conformal, equal area, or perspective. Near the point of tangency distortion is small, increasing with distance until shapes near the opposite side of the earth are unrecognizable (Figure 319).
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/19/APN2002-figure319.jpg/300px-APN2002-figure319.jpg)
Figure 319. An azimuthal equidistant map of the world with the point of tangency latitude 40°N, longitude 100°W.
The projection is useful because it combines the three features of being azimuthal, having a constant distance scale from the point of tangency, and permitting the entire earth to be shown on one map. Thus, if an important harbor or airport is selected as the point of tangency, the great-circle course, distance, and track from that point to any other point on the earth are quickly and accurately determined. For communication work with the station at the point of tangency, the path of an incoming signal is at once apparent if the direction of arrival has been determined and the direction to train a directional antenna can be determined easily. The projection is also used for polar charts and for the star finder, No. 2102D.
POLAR CHARTS
[edit]320. Polar Projections
[edit]Special consideration is given to the selection of projections for polar charts because the familiar projections become special cases with unique features.
In the case of cylindrical projections in which the axis of the cylinder is parallel to the polar axis of the earth, distortion becomes excessive and the scale changes rapidly. Such projections cannot be carried to the poles. However, both the transverse and oblique Mercator projections are used.
Conic projections with their axes parallel to the earth’s polar axis are limited in their usefulness for polar charts because parallels of latitude extending through a full 360° of longitude appear as arcs of circles rather than full circles. This is because a cone, when cut along an element and flattened, does not extend through a full 360° without stretching or resuming its former conical shape. The usefulness of such projections is also limited by the fact that the pole appears as an arc of a circle instead of a point. However, by using a parallel very near the pole as the higher standard parallel, a conic projection with two standard parallels can be made. This requires little stretching to complete the circles of the parallels and eliminate that of the pole. Such a projection, called a modified Lambert conformal or Ney’s projection, is useful for polar charts. It is particularly familiar to those accustomed to using the ordinary Lambert conformal charts in lower latitudes.
Azimuthal projections are in their simplest form when tangent at a pole. This is because the meridians are straight lines intersecting at the pole, and parallels are concentric circles with their common center at the pole. Within a few
degrees of latitude of the pole they all look similar; however, as the distance becomes greater, the spacing of the parallels becomes distinctive in each projection. In the polar azimuthal equidistant it is uniform; in the polar stereographic it increases with distance from the pole until the equator is shown at a distance from the pole equal to twice the length of the radius of the earth; in the polar gnomonic the increase is considerably greater, becoming infinity at the equator; in the polar orthographic it decreases with distance from the pole (Figure 320). All of these but the last are used for polar charts.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/00/APN2002-figure320.png/300px-APN2002-figure320.png)
Figure 320. Expansion of polar azimuthal projections.
321. Selection of a Polar Projection
[edit]The principal considerations in the choice of a suitable projection for polar navigation are: 1. Conformality: When the projection represents angles correctly, the navigator can plot directly on the chart. 2. Great circle representation: Because great circles are more useful than rhumb lines at high altitudes, the projection should represent great circles as straight lines. 3. Scale variation: The projection should have a constant scale over the entire chart. 4. Meridian representation: The projection should show straight meridians to facilitate plotting and grid navigation 5. Limits: Wide limits reduce the number of projections needed to a minimum. The projections commonly used for polar charts are the modified Lambert conformal, gnomonic, stereographic, and azimuthal equidistant. All of these projections are similar near the pole. All are essentially conformal, and a great circle on each is nearly a straight line.
As the distance from the pole increases, however, the distinctive features of each projection become important. The modified Lambert conformal projection is virtually conformal over its entire extent. The amount of its scale distortion is comparatively little if it is carried only to about 25° or 30° from the pole. Beyond this, the distortion increases rapidly. A great circle is very nearly a straight line anywhere on the chart. Distances and directions can be measured directly on the chart in the same manner as on a Lambert conformal chart. However, because this projection is not strictly conformal, and on it great circles are not exactly represented by straight lines, it is not suited for highly accurate work.
The polar gnomonic projection is the one polar projection on which great circles are exactly straight lines. However, a complete hemisphere cannot be represented upon a plane because the radius of 90° from the center would become infinity.
The polar stereographic projection is conformal over its entire extent, and a straight line closely approximates a great circle. See Figure 321. The scale distortion is not excessive for a considerable distance from the pole, but it is greater than that of the modified Lambert conformal projection. The polar azimuthal equidistant projection is useful for showing a large area such as a hemisphere because there is
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/bf/APN2002-figure321.png/300px-APN2002-figure321.png)
Figure 321. Polar stereographic projection.
no expansion along the meridians. However, the projection is not conformal and distances cannot be measured accurately in any but a north-south direction. Great circles other than the meridians differ somewhat from straight lines. The equator is a circle centered at the pole.
The two projections most commonly used for polar charts are the modified Lambert conformal and the polar stereographic. When a directional gyro is used as a directional reference, the track of the craft is approximately a great circle. A desirable chart is one on which a great circle is represented as a straight line with a constant scale and with angles correctly represented. These requirements are not met entirely by any single projection, but they are approximated by both the modified Lambert conformal and the polar stereographic. The scale is more nearly constant on the former, but the projection is not strictly conformal. The polar stereographic is conformal, and its maximum scale variation can be reduced by using a plane which intersects the earth at some parallel intermediate between the pole and the lowest parallel. The portion within this standard parallel is compressed, and that portion outside is expanded.
The selection of a suitable projection for use in polar regions depends upon mission requirements. These requirements establish the relative importance of various features. For a relatively small area, any of several projections is suitable. For a large area, however, the choice is more difficult. If grid directions are to be used, it is important that all units in related operations use charts on the same projection, with the same standard parallels, so that a single grid direction exists between any two points.
SPECIAL CHARTS
[edit]322. Plotting Sheets
[edit]Position plotting sheets are “charts” designed primarily for open ocean navigation, where land, visual aids to navigation, and depth of water are not factors in navigation. They have a latitude and longitude graticule, and they may have one or more compass roses. The meridians are usually unlabeled, so a plotting sheet can be used for any longitude. Plotting sheets on Mercator projection are specific to latitude, and the navigator should have enough aboard for all latitudes for his voyage. Plotting sheets are less expensive than charts. A plotting sheet may be used in an emergency when charts have been lost or destroyed. Directions on how to construct plotting sheets suitable for emergency purposes are given in Chapter 26, Emergency Navigation.
323. Grids
[edit]No system exists for showing the surface of the earth on a plane without distortion. Moreover, the appearance of the surface varies with the projection and with the relation of that surface area to the point of tangency. One may want to identify a location or area simply by alpha-numeric rectangular coordinates. This is accomplished with a grid. In its usual form this consists of two series of lines drawn perpendicularly on the chart, marked by suitable alpha-numeric designations.
A grid may use the rectangular graticule of the Mercator projection or a set of arbitrary lines on a particular projection. The World Geodetic Reference System (GEOREF) is a method of designating latitude and longitude by a system of letters and numbers instead of by angular measure. It is not, therefore, strictly a grid. It is useful for operations extending over a wide area. Examples of the second type of grid are the Universal Transverse Mercator (UTM) grid, the Universal Polar Stereographic (UPS) grid, and the Temporary Geographic Grid (TGG). Since these systems are used primarily by military forces, they are sometimes called military grids.
CHART SCALES
[edit]324. Types Of Scales
[edit]The scale of a chart is the ratio of a given distance on the chart to the actual distance which it represents on the earth. It may be expressed in various ways. The most common are: 1. A simple ratio or fraction, known as the representative fraction. For example, 1:80,000 or 1/80,000 means that one unit (such as a meter) on the chart represents 80,000 of the same unit on the surface of the earth. This scale is sometimes called the natural or fractional scale. 2. A statement that a given distance on the earth equals a given measure on the chart, or vice versa. For example, “30 miles to the inch” means that 1 inch on the chart represents 30 miles of the earth’s surface. Similarly, “2 inches to a mile” indicates that 2 inches on the chart represent 1 mile on the earth. This is sometimes called the numerical scale. 3. A line or bar called a graphic scale may be drawn at a convenient place on the chart and subdivided into nautical miles, meters, etc. All charts vary somewhat in scale from point to point, and in some projections the scale is not the same in all directions about a single point. A single subdivided line or bar for use over an entire chart is shown only when the chart is of such scale and projection that the scale varies a negligible amount over the chart, usually one of about 1:75,000 or larger. Since 1 minute of latitude is very nearly equal to 1 nautical mile, the latitude scale serves as an approximate graphic scale. On most nautical charts the east and west borders are subdivided to facilitate distance measurements.
On a Mercator chart the scale varies with the latitude. This is noticeable on a chart covering a relatively large distance in a north-south direction. On such a chart the border scale near the latitude in question should be used for measuring distances.
Of the various methods of indicating scale, the graphical method is normally available in some form on the chart. In addition, the scale is customarily stated on charts on which the scale does not change appreciably over the chart. The ways of expressing the scale of a chart are readily interchangeable. For instance, in a nautical mile there are about 72,913.39 inches. If the natural scale of a chart is 1:80,000, one inch of the chart represents 80,000 inches of the earth, or a little more than a mile. To find the exact amount, divide the scale by the number of inches in a mile, or 80,000/72,913.39 = 1.097. Thus, a scale of 1:80,000 is the same as a scale of 1.097 (or approximately 1.1) miles to an inch. Stated another way, there are: 72,913.39/80,000 = 0.911 (approximately 0.9) inch to a mile. Similarly, if the scale is 60 nautical miles to an inch, the representative fraction is 1:(60 x 72,913.39) = 1:4,374,803.
A chart covering a relatively large area is called a small-scale chart and one covering a relatively small area is called a large-scale chart. Since the terms are relative, there is no sharp division between the two. Thus, a chart of scale 1:100,000 is large scale when compared with a chart of 1:1,000,000 but small scale when compared with one of 1:25,000.
As scale decreases, the amount of detail which can be shown decreases also. Cartographers selectively decrease the detail in a process called generalization when producing small scale charts using large scale charts as sources. The amount of detail shown depends on several factors, among them the coverage of the area at larger scales and the intended use of the chart.
325. Chart Classification by Scale
[edit]Charts are constructed on many different scales, ranging from about 1:2,500 to 1:14,000,000. Small-scale charts covering large areas are used for route planning and for offshore navigation. Charts of larger scale, covering smaller areas, are used as the vessel approaches land. Several methods of classifying charts according to scale are used in various nations. The following classifications of nautical charts are used by the National Ocean Service.
Sailing charts are the smallest scale charts used for planning, fixing position at sea, and for plotting the dead reckoning while proceeding on a long voyage. The scale is generally smaller than 1:600,000. The shoreline and topography are generalized and only offshore soundings, the principal navigational lights, outer buoys, and landmarks visible at considerable distances are shown. General charts are intended for coastwise navigation outside of outlying reefs and shoals. The scales range from about 1:150,000 to 1:600,000.
Coastal charts are intended for inshore coastwise navigation, for entering or leaving bays and harbors of considerable width, and for navigating large inland waterways. The scales range from about 1:50,000 to 1:150,000. Harbor charts are intended for navigation and anchorage in harbors and small waterways. The scale is generally larger than 1:50,000.
In the classification system used by NIMA, the sailing charts are incorporated in the general charts classification (smaller than about 1:150,000); those coast charts especially useful for approaching more confined waters (bays, harbors) are classified as approach charts. There is considerable overlap in these designations, and the classification of a chart is best determined by its use and by its relationship to other charts of the area. The use of insets complicates the placement of charts into rigid classifications.
CHART ACCURACY
[edit]326. Factors Relating to Accuracy
[edit]The accuracy of a chart depends upon the accuracy of the hydrographic surveys and other data sources used to compile it and the suitability of its scale for its intended use. One can sometimes estimate the accuracy of a chart’s surveys from the source notes given in the title of the chart. If the chart is based upon very old surveys, use it with caution. Many early surveys were inaccurate because of the technological limitations of the surveyor.
The number of soundings and their spacing indicates the completeness of the survey. Only a small fraction of the soundings taken in a thorough survey are shown on the chart, but sparse or unevenly distributed soundings indicate that the survey was probably not made in detail. See Figure 326a and Figure 326b. Large blank areas or absence of depth contours generally indicate lack of soundings in the area. Operate in an area with sparse sounding data only if required and then only with extreme caution. Run the echo sounder continuously and operate at a reduced speed.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/75/APN2002-figure326a.png/300px-APN2002-figure326a.png)
Figure 326a. Part of a “boat sheet,” showing the soundings obtained in a survey.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/53/APN2002-figure326b.png/300px-APN2002-figure326b.png)
Figure 326b. Part of a nautical chart made from the boat sheet of Figure 326a. Compare the number of soundings in the two figures.
Sparse sounding information does not necessarily indicate an incomplete survey. Relatively few soundings are shown when there is a large number of depth contours, or where the bottom is flat, or gently and evenly sloping. Additional soundings are shown when they are helpful in indicating the uneven character of a rough bottom.
Even a detailed survey may fail to locate every rock or pinnacle. In waters where they might be located, the best method for finding them is a wire drag survey. Areas that have been dragged may be indicated on the chart by limiting lines and green or purple tint and a note added to show the effective depth at which the drag was operated.
Changes in bottom contours are relatively rapid in areas such as entrances to harbors where there are strong currents or heavy surf. Similarly, there is sometimes a tendency for dredged channels to shoal, especially if they are surrounded by sand or mud, and cross currents exist. Charts often contain notes indicating the bottom contours are known to change rapidly.
The same detail cannot be shown on a small-scale chart as on a large scale chart. On small-scale charts, detailed information is omitted or “generalized” in the areas covered by larger scale charts. The navigator should use the largest scale chart available for the area in which he is operating, especially when operating in the vicinity of hazards.
Charting agencies continually evaluate both the detail and the presentation of data appearing on a chart. Development of a new navigational aid may render previous charts inadequate. The development of radar, for example, required upgrading charts which lacked the detail required for reliable identification of radar targets.
After receiving a chart, the user is responsible for keeping it updated. Mariner’s reports of errors, changes, and suggestions are useful to charting agencies. Even with modern automated data collection techniques, there is no substitute for on-sight observation of hydrographic conditions by experienced mariners. This holds true especially in less frequently traveled areas of the world.
CHART READING
[edit]327. Chart Dates
[edit]NOS charts have two dates. At the top center of the chart is the date of the first edition of the chart. In the lower left corner of the chart is the current edition number and date. This date shows the latest date through which Notice to Mariners were applied to the chart. Any subsequent change will be printed in the Notice to Mariners. Any notices which accumulate between the chart date and the announcement date in the Notice to Mariners will be given with the announcement. Comparing the dates of the first and current editions gives an indication of how often the chart is updated. Charts of busy areas are updated more frequently than those of less traveled areas. This interval may vary from 6 months to more than ten years for NOS charts. This update interval may be much longer for certain NIMA charts in remote areas.
New editions of charts are both demand and source driven. Receiving significant new information may or may not initiate a new edition of a chart, depending on the demand for that chart. If it is in a sparsely-traveled area, other priorities may delay a new edition for several years. Conversely, a new edition may be printed without the receipt of significant new data if demand for the chart is high and stock levels are low. Notice to Mariners corrections are always included on new editions.
NIMA charts have the same two dates as the NOS charts; the current chart edition number and date is given in the lower left corner. Certain NIMA charts are reproductions of foreign charts produced under joint agreements with a number of other countries. These charts, even though of recent date, may be based on foreign charts of considerably earlier date. Further, new editions of the foreign chart will not necessarily result in a new edition of the NIMA reproduction. In these cases, the foreign chart is the better chart to use.
328. Title Block
[edit]The chart title block should be the first thing a navigator looks at when receiving a new edition chart. Refer to Figure 328. The title itself tells what area the chart covers. The chart’s scale and projection appear below the title. The chart will give both vertical and horizontal datums and, if necessary, a datum conversion note. Source notes or diagrams will list the date of surveys and other charts used in compilation.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/53/APN2002-figure328.png/500px-APN2002-figure328.png)
Figure 328. A chart title block.
329. Shoreline
[edit]The shoreline shown on nautical charts represents the line of contact between the land and water at a selected vertical datum. In areas affected by tidal fluctuations, this is usually the mean high-water line. In confined coastal waters of diminished tidal influence, a mean water level line may be used. The shoreline of interior waters (rivers, lakes) is usually a line representing a specified elevation above a selected datum. A shoreline is symbolized by a heavy line. A broken line indicates that the charted position is approximate only. The nature of the shore may be indicated.
If the low water line differs considerably from the high water line, then a dotted line represents the low water line. If the bottom in this area is composed of mud, sand, gravel or stones, the type of material will be indicated. If the bottom is composed of coral or rock, then the appropriate symbol will be used. The area alternately covered and uncovered may be shown by a tint which is usually a combination of the land and water tint.
The apparent shoreline shows the outer edge of marine vegetation where that limit would appear as shoreline to the mariner. It is also used to indicate where marine vegetation prevents the mariner from defining the shoreline. A light line symbolizes this shoreline. A broken line marks the inner edge when no other symbol (such as a cliff or levee) furnishes such a limit. The combined land-water tint or the land tint marks the area between inner and outer limits.
330. Chart Symbols
[edit]Much of the information contained on charts is shown by symbols. These symbols are not shown to scale, but they indicate the correct position of the feature to which they refer. The standard symbols and abbreviations used on charts published by the United States of America are shown in Chart No. 1, Nautical Chart Symbols and Abbreviations. See Figure 330.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/12/APN2002-figure330.jpg/300px-APN2002-figure330.jpg)
Figure 330. Contents of U.S. Chart No. 1.
Electronic chart symbols are, within programming and display limits, much the same as printed ones. The less expensive electronic charts have less extensive symbol libraries, and the screen’s resolution may affect the presentation detail.
Most of the symbols and abbreviations shown in U.S. Chart No. 1 agree with recommendations of the International Hydrographic Organization (IHO). The layout is explained in the general remarks section of Chart No. 1. The symbols and abbreviations on any given chart may differ somewhat from those shown in Chart No. 1. In addition, foreign charts may use different symbology. When using a foreign chart, the navigator should have available the Chart No. 1 from the country which produced the chart.
Chart No. 1 is organized according to subject matter, with each specific subject given a letter designator. The general subject areas are General, Topography, Hydrography, Aids and Services, and Indexes. Under each heading, letter designators further define subject areas, and individual numbers refer to specific symbols.
Information in Chart No. 1 is arranged in columns. The first column contains the IHO number code for the symbol in question. The next two columns show the symbol itself, in NOS and NIMA formats. If the formats are the same, the two columns are combined into one. The next column is a text description of the symbol, term, or abbreviation. The next column contains the IHO standard symbol. The last column shows certain symbols used on foreign reproduction charts produced by NIMA.
331. Lettering
[edit]Except on some modified reproductions of foreign charts, cartographers have adopted certain lettering standards. Vertical type is used for features which are dry at high water and not affected by movement of the water; slanting type is used for underwater and floating features.
There are two important exceptions to the two general rules listed above. Vertical type is not used to represent heights above the waterline, and slanting type is not used to indicate soundings, except on metric charts. Section 332 below discusses the conventions for indicating soundings.
Evaluating the type of lettering used to denote a feature, one can determine whether a feature is visible at high tide. For instance, a rock might bear the title “Rock” whether or not it extends above the surface. If the name is given in vertical letters, the rock constitutes a small islet; if in slanting type, the rock constitutes a reef, covered at high water.
332. Soundings
[edit]Charts show soundings in several ways. Numbers denote individual soundings. These numbers may be either vertical or slanting; both may be used on the same chart, distinguishing between data based upon different U.S. and foreign surveys, different datums, or smaller scale charts.
Large block letters at the top and bottom of the chart indicate the unit of measurement used for soundings. SOUNDINGS IN FATHOMS indicates soundings are in fathoms or fathoms and fractions. SOUNDINGS IN FATHOMS AND FEET indicates the soundings are in fathoms and feet. A similar convention is followed when the soundings are in meters or meters and tenths. A depth conversion scale is placed outside the neatline on the chart for use in converting charted depths to feet, meters, or fathoms. “No bottom” soundings are indicated by a number with a line over the top and a dot over the line. This indicates that the spot was sounded to the depth indicated without reaching the bottom. Areas which have been wire dragged are shown by a broken limiting line, and the clear effective depth is indicated, with a characteristic symbol under the numbers. On NIMA charts a purple or green tint is shown within the swept area.
Soundings are supplemented by depth contours, lines connecting points of equal depth. These lines present a picture of the bottom. The types of lines used for various depths are shown in Section I of Chart No. 1. On some charts depth contours are shown in solid lines; the depth represented by each line is shown by numbers placed in breaks in the lines, as with land contours. Solid line depth contours are derived from intensively developed hydrographic surveys. A broken or indefinite contour is substituted for a solid depth contour whenever the reliability of the contour is questionable. Depth contours are labeled with numerals in the unit of measurement of the soundings. A chart presenting a more detailed indication of the bottom configuration with fewer numerical soundings is useful when bottom contour navigating. Such a chart can be made only for areas which have undergone a detailed survey Shoal areas often are given a blue tint. Charts designed to give maximum emphasis to the configuration of the bottom show depths beyond the 100-fathom curve over the entire chart by depth contours similar to the contours shown on land areas to indicate graduations in height. These are called bottom contour or bathymetric charts.
On electronic charts, a variety of other color schemes may be used, according to the manufacturer of the system. Color perception studies are being used to determine the best presentation. The side limits of dredged channels are indicated by broken lines. The project depth and the date of dredging, if known, are shown by a statement in or along the channel. The possibility of silting is always present. Local authorities should be consulted for the controlling depth. NOS Charts frequently show controlling depths in a table, which is kept current by the Notice to Mariners.
The chart scale is generally too small to permit all soundings to be shown. In the selection of soundings, least depths are shown first. This conservative sounding pattern provides safety and ensures an uncluttered chart appearance. Steep changes in depth may be indicated by more dense soundings in the area. The limits of shoal water indicated on the chart may be in error, and nearby areas of undetected shallow water may not be included on the chart. Given this possibility, areas where shoal water is known to exist should be avoided. If the navigator must enter an area containing shoals, he must exercise extreme caution in avoiding shallow areas which may have escaped detection. By constructing a “safety range” around known shoals and ensuring his vessel does not approach the shoal any closer than the safety range, the navigator can increase his chances of successfully navigating through shoal water. Constant use of the echo sounder is also important.
Abbreviations listed in Section J of Chart No. 1 are used to indicate what substance forms the bottom. The meaning of these terms can be found in the Glossary of this volume. While in ages past navigators might actually navigate by knowing the bottom characteristics of certain local areas, today knowing the characteristic of the bottom is most important when anchoring.
333. Depths and Datums
[edit]Depths are indicated by soundings or explanatory notes. Only a small percentage of the soundings obtained in a hydrographic survey can be shown on a nautical chart. The least depths are generally selected first, and a pattern built around them to provide a representative indication of bottom relief. In shallow water, soundings may be spaced 0.2 to 0.4 inch apart. The spacing is gradually increased as water deepens, until a spacing of 0.8 to 1.0 inch is reached in deeper waters offshore. Where a sufficient number of soundings are available to permit adequate interpretation, depth curves are drawn in at selected intervals.
All depths indicated on charts are reckoned from a selected level of the water, called the sounding datum, (sometimes referred to as the reference plane to distinguish this term from the geodetic datum). The various sounding datums are explained in Chapter 9, Tides and Tidal Currents. On charts produced from U.S. surveys, the sounding datum is selected with regard to the tides of the region. Depths shown are the least depths to be expected under average conditions. On charts compiled from foreign charts and surveys the sounding datum is that of the original authority. When it is known, the sounding datum used is stated on the chart. In some cases where the chart is based upon old surveys, particularly in areas where the range of tide is not great, the sounding datum may not be known.
For most National Ocean Service charts of the United States and Puerto Rico, the sounding datum is mean lower low water. Most NIMA charts are based upon mean low water, mean lower low water, or mean low water springs. The sounding datum for charts published by other countries varies greatly, but is usually lower than mean low water. On charts of the Baltic Sea, Black Sea, the Great Lakes, and other areas where tidal effects are small or without significance, the sounding datum adopted is an arbitrary height approximating the mean water level.
The sounding datum of the largest scale chart of an area is generally the same as the reference level from which height of tide is tabulated in the tide tables. The chart datum is usually only an approximation of the actual mean value, because determination of the actual mean height usually requires a longer series of tidal observations than is usually available to the cartographer. In addition, the heights of the tide vary over time. Since the chart datum is generally a computed mean or average height at some state of the tide, the depth of water at any particular moment may be less than shown on the chart. For example, if the chart datum is mean lower low water, the depth of water at lower low water will be less than the charted depth about as often as it is greater. A lower depth is indicated in the tide tables by a minus sign (–).
334. Heights
[edit]The shoreline shown on charts is generally mean high water. A light’s height is usually reckoned from mean sea level. The heights of overhanging obstructions (bridges, power cables, etc.) are usually reckoned from mean high water. A high water reference gives the mariner the minimum clearance expected.
Since heights are usually reckoned from high water and depths from some form of low water, the reference levels are seldom the same. Except where the range of tide is very large, this is of little practical significance.
335. Dangers
[edit]Dangers are shown by appropriate symbols, as indicated in Section K of Chart No. 1. A rock uncovered at mean high water may be shown as an islet. If an isolated, offlying rock is known to uncover at the sounding datum but to be covered at high water, the chart shows the appropriate symbol for a rock and gives the height above the sounding datum. The chart can give this height one of two ways. It can use a statement such as “Uncov 2 ft.,” or it can indicate the number of feet the rock protrudes above the sounding datum, underline this value, and enclose it in parentheses (i.e. (2)). A rock which does not uncover is shown by an enclosed figure approximating its dimensions and filled with land tint. It may be enclosed by a dotted depth curve for emphasis.
A tinted, irregular-line figure of approximately true dimensions is used to show a detached coral reef which uncovers at the chart datum. For a coral or rocky reef which is submerged at chart datum, the sunken rock symbol or an appropriate statement is used, enclosed by a dotted or broken line if the limits have been determined.
Several different symbols mark wrecks. The nature of the wreck or scale of the chart determines the correct symbol. A sunken wreck with less than 11 fathoms of water over it is considered dangerous and its symbol is surrounded by a dotted curve. The curve is omitted if the wreck is deeper than 11 fathoms. The safe clearance over a wreck, if known, is indicated by a standard sounding number placed at the wreck. If this depth was determined by a wire drag, the sounding is underscored by the wire drag symbol. An unsurveyed wreck over which the exact depth is unknown but a safe clearance depth is known is depicted with a solid line above the symbol. Tide rips, eddies, and kelp are shown by symbol or legend. Piles, dolphins (clusters of piles), snags, and stumps are shown by small circles and a label identifying the type of obstruction. If such dangers are submerged, the letters “Subm” precede the label. Fish stakes and traps are shown when known to be permanent or hazardous to navigation.
336. Aids to Navigation
[edit]Aids to navigation are shown by symbols listed in Sections P through S of Chart No. 1. Abbreviations and additional descriptive text supplement these symbols. In order to make the symbols conspicuous, the chart shows them in size greatly exaggerated relative to the scale of the chart. “Position approximate” circles are used on floating aids to indicate that they have no exact position because they move around their moorings. For most floating aids, the position circle in the symbol marks the approximate location of the anchor or sinker. The actual aid may be displaced from this location by the scope of its mooring. The type and number of aids to navigation shown on a chart and the amount of information given in their legends varies with the scale of the chart. Smaller scale charts may have fewer aids indicated and less information than larger scale charts of the same area.
Lighthouses and other navigation lights are shown as black dots with purple disks or as black dots with purple flare symbols. The center of the dot is the position of the light. Some modified facsimile foreign charts use a small star instead of a dot.
On large-scale charts the legend elements of lights are shown in the following order: The legend for this light would appear on the chart: Fl(2) R 10s 80m 19M “6” As chart scale decreases, information in the legend is selectively deleted to avoid clutter. The order of deletion is usually height first, followed by period, group repetition interval (e.g. (2)), designation, and range. Characteristic and color will almost always be shown.
Small triangles mark red daybeacons; small squares mark all others. On NIMA charts, pictorial beacons are used when the IALA buoyage system has been implemented. The center of the triangle marks the position of the aid. Except on Intracoastal Waterway charts and charts of state waterways, the abbreviation “Bn” is shown beside the symbol, along with the appropriate abbreviation for color if known. For black beacons the triangle is solid black and there is no color abbreviation. All beacon abbreviations are in vertical lettering.
Radiobeacons are indicated on the chart by a purple circle accompanied by the appropriate abbreviation indicating an ordinary radiobeacon (R Bn) or a radar beacon (Ramark or Racon, for example).
A variety of symbols, determined by both the charting agency and the types of buoys, indicate navigation buoys. IALA buoys (see Chapter 5, Short Range Aids to Navigation) in foreign areas are depicted by various styles of symbols with proper topmarks and colors; the position circle which shows the approximate location of the sinker is at the base of the symbol.
A mooring buoy is shown by one of several symbols as indicated in Chart No. 1. It may be labeled with a berth number or other information.
A buoy symbol with a horizontal line indicates the buoy has horizontal bands. A vertical line indicates vertical stripes; crossed lines indicate a checked pattern. There is no significance to the angle at which the buoy symbol appears on the chart. The symbol is placed so as to avoid interference with other features.
Lighted buoys are indicated by a purple flare from the buoy symbol or by a small purple disk centered on the position circle.
Abbreviations for light legends, type and color of buoy, designation, and any other pertinent information given near the symbol are in slanted type. The letter C, N, or S indicates a can, nun, or spar, respectively. Other buoys are assumed to be pillar buoys, except for special buoys such as spherical, barrel, etc. The number or letter designation of the buoy is given in quotation marks on NOS charts. On other charts they may be given without quotation marks or other punctuation.
Aeronautical lights included in the light lists are shown by the lighthouse symbol, accompanied by the abbreviation “AERO.” The characteristics shown depend principally upon the effective range of other navigational lights in the vicinity and the usefulness of the light for marine navigation.
Directional ranges are indicated by a broken or solid line. The solid line, indicating that part of the range intended for navigation, may be broken at irregular intervals to avoid being drawn through soundings. That part of the range line drawn only to guide the eye to the objects to be kept in range is broken at regular intervals. The direction, if given, is expressed in degrees, clockwise from true north.
Sound signals are indicated by the appropriate word in capital letters (HORN, BELL, GONG, or WHIS) or an abbreviation indicating the type of sound. Sound signals of any type except submarine sound signals may be represented by three purple 45° arcs of concentric circles near the top of the aid. These are not shown if the type of signal is listed. The location of a sound signal which does not accompany a visual aid, either lighted or unlighted, is shown by a small circle and the appropriate word in vertical block letters. Private aids, when shown, are marked “Priv” on NOS charts. Some privately maintained unlighted fixed aids are indicated by a small circle accompanied by the word “Marker,” or a larger circle with a dot in the center and the word “MARKER.” A privately maintained lighted aid has a light symbol and is accompanied by the characteristics and the usual indication of its private nature. Private aids should be used with caution.
A light sector is the sector or area bounded by two radii and the arc of a circle in which a light is visible or in which it has a distinctive color different from that of adjoining sectors. The limiting radii are indicated on the chart by dotted or dashed lines. Sector colors are indicated by words spelled out if space permits, or by abbreviations (W, R, etc.) if it does not. Limits of light sectors and arcs of visibility as observed from a vessel are given in the light lists, in clockwise order.
337. Land Areas
[edit]The amount of detail shown on the land areas of nautical charts depends upon the scale and the intended purpose of the
Legend Example Meaning Characteristic F1(2) group flashing; 2 flashes Color R red Period 10s 2 flashes in 10 seconds Height 80m 80 meters Range 19M 19 nautical miles Designation “6” light number 6
chart. Contours, form lines, and shading indicate relief. Contours are lines connecting points of equal elevation. Heights are usually expressed in feet (or in meters with means for conversion to feet). The interval between contours is uniform over any one chart, except that certain intermediate contours are sometimes shown by broken line. When contours are broken, their locations are approximate. Form lines are approximations of contours used for the purpose of indicating relative elevations. They are used in areas where accurate information is not available in sufficient detail to permit exact location of contours. Elevations of individual form lines are not indicated on the chart. Spot elevations are generally given only for summits or for tops of conspicuous landmarks. The heights of spot elevations and contours are given with reference to mean high water when this information is available.
When there is insufficient space to show the heights of islets or rocks, they are indicated by slanting figures enclosed in parentheses in the water area nearby.
338. Cities and Roads
[edit]Cities are shown in a generalized pattern that approximates their extent and shape. Street names are generally not charted except those along the waterfront on the largest scale charts. In general, only the main arteries and thoroughfares or major coastal highways are shown on smaller scale charts. Occasionally, highway numbers are given. When shown, trails are indicated by a light broken line. Buildings along the waterfront or individual ones back from the waterfront but of special interest to the mariner are shown on large-scale charts. Special symbols from Chart No. 1 are used for certain kinds of buildings. A single line with cross marks indicates both single and double track railroads. City electric railways are usually not charted.
Airports are shown on small-scale charts by symbol and on large-scale charts by the shape of runways. The scale of the chart determines if single or double lines show breakwaters and jetties; broken lines show the submerged portion of these features.
339. Landmarks
[edit]Landmarks are shown by symbols in Chart No. 1. A large circle with a dot at its center is used to indicate that the position is precise and may be used without reservation for plotting bearings. A small circle without a dot is used for landmarks not accurately located. Capital and lower case letters are used to identify an approximate landmark: “Mon,” “Cup,” or “Dome.” The abbreviation “PA” (position approximate) may also appear. An accurate landmark is identified by all capital type (“MON,” “CUP,” “DOME”). When only one object of a group is charted, its name is followed by a descriptive legend in parenthesis, including the number of objects in the group, for example “(TALLEST OF FOUR)” or “(NORTHEAST OF THREE).”
340. Miscellaneous Chart Features
[edit]A measured nautical mile indicated on a chart is accurate to within 6 feet of the correct length. Most measured miles in the United States were made before 1959, when the United States adopted the International Nautical Mile. The new value is within 6 feet of the previous standard length of 6,080.20 feet. If the measured distance differs from the standard value by more than 6 feet, the actual measured distance is stated and the words “measured mile” are omitted.
Periods after abbreviations in water areas are omitted because these might be mistaken for rocks. However, a lower case i or j is dotted.
Commercial radio broadcasting stations are shown on charts when they are of value to the mariner either as landmarks or sources of direction-finding bearings.
Lines of demarcation between the areas in which international and inland navigation rules apply are shown only when they cannot be adequately described in notes on the chart.
Compass roses are placed at convenient locations on Mercator charts to facilitate the plotting of bearings and courses. The outer circle is graduated in degrees with zero at true north. The inner circle indicates magnetic north.
On many NIMA charts magnetic variation is given to the nearest 1' by notes in the centers of compass roses. the annual change is given to the nearest 1' to permit correction of the given value at a later date. On NOS charts, variation is to the nearest 15', updated at each new edition if over three years old. The current practice of NIMA is to give the magnetic variation to the nearest 1', but the magnetic information on new editions is only updated to conform with the latest five year epoch. Whenever a chart is reprinted, the magnetic information is updated to the latest epoch. On some smaller scale charts, the variation is given by isogonic lines connecting points of equal variation; usually a separate line represents each degree of variation. The line of zero variation is called the agonic line. Many plans and insets show neither compass roses nor isogonic lines, but indicate magnetic information by note. A local magnetic disturbance of sufficient force to cause noticeable deflection of the magnetic compass, called local attraction, is indicated by a note on the chart.
Currents are sometimes shown on charts with arrows giving the directions and figures showing speeds. The information refers to the usual or average conditions. According to tides and weather, conditions at any given time may differ considerably from those shown.
Review chart notes carefully because they provide important information. Several types of notes are used. Those in the margin give such information as chart number, publication notes, and identification of adjoining charts. Notes in connection with the chart title include information on scale, sources of data, tidal information, soundings, and cautions. Another class of notes covers such topics as local magnetic disturbance, controlling depths of channels, hazards to navigation, and anchorages.
A datum note will show the geodetic datum of the chart (Do not confuse with the sounding datum. See Chapter 2, Geodesy and Datums in Navigation.) It may also contain instructions on plotting positions from the WGS 84 or NAD 83 datums on the chart if such a conversion is needed.
Anchorage areas are labeled with a variety of magenta, black, or green lines depending on the status of the area. Anchorage berths are shown as purple circles, with the number or letter assigned to the berth inscribed within the circle. Caution notes are sometimes shown when there are specific anchoring regulations.
Spoil areas are shown within short broken black lines. Spoil areas are tinted blue on NOS charts and labeled. These areas contain no soundings and should be avoided.
Firing and bombing practice areas in the United States territorial and adjacent waters are shown on NOS and NIMA charts of the same area and comparable scale.
Danger areas established for short periods of time are not charted but are announced locally. Most military commands charged with supervision of gunnery and missile firing areas promulgate a weekly schedule listing activated danger areas. This schedule is subjected to frequent change; the mariner should always ensure he has the latest schedule prior to proceeding into a gunnery or missile firing area. Danger areas in effect for longer periods are published in the Notice to Mariners. Any aid to navigation established to mark a danger area or a fixed or floating target is shown on charts.
Traffic separation schemes are shown on standard nautical charts of scale 1:600,000 and larger and are printed in magenta.
A logarithmic time-speed-distance nomogram with an explanation of its application is shown on harbor charts.
Tidal information boxes are shown on charts of scales 1:200,000 and larger for NOS charts, and various scales on DMA charts, according to the source. See Figure 340a.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7b/APN2002-figure340a.png/550px-APN2002-figure340a.png)
Figure 340a. Tidal box.
Tabulations of controlling depths are shown on some National Ocean Service harbor and coastal charts. See Figure 340b.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/df/APN2002-figure340b.png/550px-APN2002-figure340b.png)
Figure 340b. Tabulations of controlling depths.
Study Chart No. 1 thoroughly to become familiar with all the symbols used to depict the wide variety of features on nautical charts.
REPRODUCTIONS OF FOREIGN CHARTS
[edit]341. Modified Facsimiles
[edit]Modified facsimile charts are modified reproductions of foreign charts produced in accordance with bilateral international agreements. These reproductions provide the mariner with up-to-date charts of foreign waters. Modified facsimile charts published by NIMA are, in general, reproduced with minimal changes, as listed below: 1. The original name of the chart may be removed and replaced by an anglicized version. 2. English language equivalents of names and terms on the original chart are printed in a suitable glossary on the reproduction, as appropriate. 3. All hydrographic information, except bottom characteristics, is shown as depicted on the original chart. 4. Bottom characteristics are as depicted in Chart No. 1, or as on the original with a glossary. 5. The unit of measurement used for soundings is shown in block letters outside the upper and lower neatlines. 6. A scale for converting charted depth to feet, meters, or fathoms is added. 7. Blue tint is shown from a significant depth curve to the shoreline. 8. Blue tint is added to all dangers enclosed by a dotted danger curve, dangerous wrecks, foul areas, obstructions, rocks awash, sunken rocks, and swept wrecks. 9. Caution notes are shown in purple and enclosed in a box. 10. Restricted, danger, and prohibited areas are usually outlined in purple and labeled appropriately. 11. Traffic separation schemes are shown in purple. 12. A note on traffic separation schemes, printed in black, is added to the chart. 13. Wire dragged (swept) areas are shown in purple or green. 14. Corrections are provided to shift the horizontal datum to the World Geodetic System (1984).
INTERNATIONAL CHARTS
[edit]342. International Chart Standards
[edit]The need for mariners and chart makers to understand and use nautical charts of different nations became increasingly apparent as the maritime nations of the world developed their own establishments for the compilation and publication of nautical charts from hydrographic surveys. Representatives of twenty-two nations formed a Hydrographic Conference in London in 1919. That conference resulted in the establishment of the International Hydrographic Bureau (IHB) in Monaco in 1921. Today, the IHB’s successor, the International Hydrographic Organization (IHO) continues to provide international standards for the cartographers of its member nations. (See Chapter 1, Introduction to Marine Navigation, for a description of the IHO.)
Recognizing the considerable duplication of effort by member states, the IHO in 1967 moved to introduce the first international chart. It formed a committee of six member states to formulate specifications for two series of international charts. Eighty-three small-scale charts were approved; responsibility for compiling these charts has subsequently been accepted by the member states’ Hydrographic Offices.
Once a Member State publishes an international chart, reproduction material is made available to any other Member State which may wish to print the chart for its own purposes.
International charts can be identified by the letters INT before the chart number and the International Hydrographic Organization seal in addition to other national seals which may appear.
CHART NUMBERING
[edit]343. The Chart Numbering System
[edit]NIMA and NOS use a system in which numbers are assigned in accordance with both the scale and geographical area of coverage of a chart. With the exception of certain charts produced for military use only, one- to five-digit numbers are used. With the exception of onedigit numbers, the first digit identifies the area; the number of digits establishes the scale range. The one-digit numbers are used for certain products in the chart system which are not actually charts. Number of Digits Scale 1 No Scale 2 1:9 million and smaller 3 1:2 million to 1:9 million 4 Special Purpose 5 1:2 million and larger
Two- and three-digit numbers are assigned to those small-scale charts which depict a major portion of an ocean basin or a large area. The first digit identifies the applicable ocean basin. See Figure 343a. Two-digit numbers are used for charts of scale 1:9,000,000 and smaller. Three-digit numbers are used for charts of scale 1:2,000,000 to 1:9,000,000.
Due to the limited sizes of certain ocean basins, no charts for navigational use at scales of 1:9,000,000 and smaller are published to cover these basins. The otherwise unused two-digit numbers (30 to 49 and 70 to 79) are assigned to special world charts.
One exception to the scale range criteria for threedigit numbers is the use of three-digit numbers for a series of position plotting sheets. They are of larger scale than 1:2,000,000 because they have application in ocean basins and can be used in all longitudes. Four-digit numbers are used for non-navigational and special purpose charts, such as chart 5090, Maneuvering Board.
Five-digit numbers are assigned to those charts of scale 1:2,000,000 and larger that cover portions of the coastline rather than significant portions of ocean basins. These charts are based on the regions of the nautical chart index. See Figure 343b.
The first of the five digits indicates the region; the second digit indicates the subregion; the last three digits indicate the geographical sequence of the chart within the subregion. Many numbers have been left unused so that any future charts may be placed in their proper geographical sequence.
In order to establish a logical numbering system within the geographical subregions (for the 1:2,000,000 and larger-scale charts), a worldwide skeleton framework of coastal charts was laid out at a scale 1:250,000. This series was used as basic coverage except in areas where a coordinated series at about this scale already existed (such as the coast of Norway where a coordinated series of 1:200,000 charts was available).
Within each region, the geographical subregions are numbered counterclockwise around the continents, and within each subregion the basic series also is numbered counterclockwise around the continents. The basic coverage is assigned generally every 20th digit, except that the first 40 numbers in each subregion are reserved for smaller-scale coverage. Charts with scales larger than the basic coverage are assigned one of the 19 numbers following the number assigned to the sheet within which it falls. Figure 343c shows the numbering sequence in Iceland. Note the sequence of numbers around the coast, the direction of numbering, and the numbering of larger scale charts within the limits of smaller scales.
Five-digit numbers are also assigned to the charts produced by other hydrographic offices. This numbering system is applied to foreign charts so that they can be filed in logical sequence with the charts produced by the National Imagery and Mapping Agency and the National Ocean Service. Certain exceptions to the standard numbering system have been made for charts intended for the military. Bottom contour charts depict parts of ocean basins. They are identified with a letter plus four digits according to a scheme best shown in the catalog, and are not available to civilian navigators.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c0/APN2002-figure343a.png/300px-APN2002-figure343a.png)
Figure 343a. Ocean basins with region numbers.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/22/APN2002-figure343b.png/300px-APN2002-figure343b.png)
Figure 343b. Regions and subregions of the nautical chart index.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/9f/APN2002-figure343c.png/300px-APN2002-figure343c.png)
Figure 343c. Chart coverage of Iceland, illustrating the sequence and direction of the U.S. chart numbering system.
Combat charts have 6-digit numbers beginning with an “8.” Neither is available to civilian navigators.
344. Catalogs and Stock Numbers
[edit]Chart catalogs provide information regarding not only chart coverage, but also a variety of special purpose charts and publications of interest. Keep a corrected chart catalog aboard ship for review by the navigator. The NIMA catalog contains operating area charts and other special products not available for civilian use, but does not contain any classified listings. The NOS catalogs contain all unclassified civilianuse NOS and NIMA charts. Military navigators receive their nautical charts and publications automatically; civilian navigators purchase them from chart sales agents.
The stock number and bar code are generally found in the lower left corner of a NIMA chart, and in the lower right corner of an NOS chart. The first two digits of the stock number refer to the region and subregion. These are followed by three letters, the first of which refers to the portfolio to which the chart belongs; the second two denote the type of chart: CO for coastal, HA for harbor and approach, and OA for military operating area charts. The last five digits are the actual chart number.
USING CHARTS
[edit]345. Preliminary Steps
[edit]Before using a new edition of a chart, verify its announcement in the Notice to Mariners and correct it with all applicable corrections. Read all the chart’s notes; there should be no question about the meanings of symbols or the units in which depths are given. Since the latitude and longitude scales differ considerably on various charts, carefully note those on the chart to be used.
Place additional information on the chart as required. Arcs of circles might be drawn around navigational lights to indicate the limit of visibility at the height of eye of an observer on the bridge. Notes regarding other information from the light lists, tide tables, tidal current tables, and sailing directions might prove helpful.
346. Maintaining Charts
[edit]A mariner navigating on an uncorrected chart is courting disaster. The chart’s print date reflects the latest Notice to Mariners used to update the chart; responsibility for maintaining it after this date lies with the user. The weekly Notice to Mariners contains information needed for maintaining charts. Radio broadcasts give advance notice of urgent corrections. Local Notice to Mariners should be consulted for inshore areas. The navigator must develop a system to keep track of chart corrections and to ensure that the chart he is using is updated with the latest correction. A convenient way of keeping this record is with a Chart/Publication Correction Record Card system. Using this system, the navigator does not immediately update every chart in his portfolio when he receives the Notice to Mariners. Instead, he constructs a card for every chart in his portfolio and notes the correction on this card. When the time comes to use the chart, he pulls the chart and chart’s card, and he makes the indicated corrections on the chart. This system ensures that every chart is properly corrected prior to use.
A Summary of Corrections, containing a cumulative listing of previously published Notice to Mariners corrections, is published annually in 5 volumes by NIMA. Thus, to fully correct a chart whose edition date is several years old, the navigator needs only the Summary of Corrections for that region and the notices from that Summary forward; he does not need to obtain notices all the way back to the edition date. See Chapter 4, Nautical Publications, for a description of the Summaries and Notice to Mariners.
When a new edition of a chart is published, it is normally furnished automatically to U.S. Government vessels. It should not be used until it is announced as ready for use in the Notice to Mariners. Until that time, corrections in the Notice apply to the old edition and should not be applied to the new one. When it is announced, a new edition of a chart replaces an older one.
Commercial users and others who don’t automatically receive new editions should obtain new editions from their sales agent. Occasionally, charts may be received or purchased several weeks in advance of their announcement in the Notice to Mariners. This is usually due to extensive rescheming of a chart region and the need to announce groups of charts together to avoid lapses in coverage. The mariner bears the responsibility for ensuring that his charts are the current edition. The fact that a new edition has been compiled and published often indicates that there have been extensive changes that cannot be made by hand corrections.
347. Using and Stowing Charts
[edit]Use and stow charts carefully. This is especially true with digital charts contained on electronic media. Keep optical and magnetic media containing chart data out of the sun, inside dust covers, and away from magnetic influences. Placing a disk in an inhospitable environment may destroy the data.
Make permanent corrections to paper charts in ink so that they will not be inadvertently erased. Pencil in all other markings so that they can be easily erased without damaging the chart. Lay out and label tracks on charts of frequently-traveled ports in ink. Draw lines and labels no larger than necessary. Do not obscure sounding data or other information when labeling a chart. When a voyage is completed, carefully erase the charts unless there has been a grounding or collision. In this case, preserve the charts without change because they will play a critical role in the investigation.
When not in use, stow charts flat in their proper portfolio. Minimize their folding and properly index them for easy retrieval.
348. Chart Lighting
[edit]Mariners often work in a red light environment because red light is least disturbing to night adapted vision. Such lighting seriously affects the appearance of a chart. Before using a chart in red light, test the effect red light has on its markings. Do not outline or otherwise indicate navigational hazards in red pencil because red markings disappear under red light.
349. Small-Craft Charts
[edit]NOS publishes a series of small craft charts sometimes called “strip charts.” These charts depict segments of the Atlantic Intracoastal Waterway, the Gulf Intracoastal Waterway, and other inland routes used by yachtsmen, fishermen, and small commercial vessels for coastal travel. They are not “north-up” in presentation, but are aligned with the waterway they depict, whatever its orientation is. Most often they are used as a piloting aid for “eyeball” navigation and placed “course-up” in front of the helmsman, because the routes they show are too confined for taking and plotting fixes.
Although NOS small-craft charts are designed primarily for use aboard yachts, fishing vessels and other small craft, these charts, at scales of 1:80,000 and larger, are in some cases the only charts available depicting inland waters transited by large vessels. In other cases the small-craft charts may provide a better presentation of navigational hazards than the standard nautical chart because of better scale and more detail. Therefore, navigators should use these charts in areas where they provide the best coverage.