Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 02014R0833-20240224

    Consolidated text: Council Regulation (EU) No 833/2014 of 31 July 2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine

    ELI: http://data.europa.eu/eli/reg/2014/833/2024-02-24

    02014R0833 — EN — 24.02.2024 — 022.001


    This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

    ►B

    COUNCIL REGULATION (EU) No 833/2014

    of 31 July 2014

    concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine

    (OJ L 229 31.7.2014, p. 1)

    Amended by:

     

     

    Official Journal

      No

    page

    date

    ►M1

    COUNCIL REGULATION (EU) No 960/2014 of 8 September 2014

      L 271

    3

    12.9.2014

    ►M2

    COUNCIL REGULATION (EU) No 1290/2014 of 4 December 2014

      L 349

    20

    5.12.2014

    ►M3

    COUNCIL REGULATION (EU) 2015/1797 of 7 October 2015

      L 263

    10

    8.10.2015

    ►M4

    COUNCIL REGULATION (EU) 2017/2212 of 30 November 2017

      L 316

    15

    1.12.2017

     M5

    COMMISSION IMPLEMENTING REGULATION (EU) 2019/1163 of 5 July 2019

      L 182

    33

    8.7.2019

    ►M6

    COUNCIL REGULATION (EU) 2022/262 of 23 February 2022

      L 42I

    74

    23.2.2022

    ►M7

    COUNCIL REGULATION (EU) 2022/328 of 25 February 2022

      L 49

    1

    25.2.2022

    ►M8

    COUNCIL REGULATION (EU) 2022/334 of 28 February 2022

      L 57

    1

    28.2.2022

    ►M9

    COUNCIL REGULATION (EU) 2022/345 of 1 March 2022

      L 63

    1

    2.3.2022

    ►M10

    COUNCIL REGULATION (EU) 2022/350 of 1 March 2022

      L 65

    1

    2.3.2022

    ►M11

    COUNCIL REGULATION (EU) 2022/394 of 9 March 2022

      L 81

    1

    9.3.2022

    ►M12

    COUNCIL REGULATION (EU) 2022/428 of 15 March 2022

      L 87I

    13

    15.3.2022

    ►M13

    COUNCIL REGULATION (EU) 2022/576 of 8 April 2022

      L 111

    1

    8.4.2022

    ►M14

    COMMISSION IMPLEMENTING REGULATION (EU) 2022/595 of 11 April 2022

      L 114

    60

    12.4.2022

    ►M15

    COUNCIL REGULATION (EU) 2022/879 of 3 June 2022

      L 153

    53

    3.6.2022

    ►M16

    COUNCIL REGULATION (EU) 2022/1269 of 21 July 2022

      L 193

    1

    21.7.2022

    ►M17

    COUNCIL REGULATION (EU) 2022/1904 of 6 October 2022

      L 259I

    3

    6.10.2022

    ►M18

    COUNCIL REGULATION (EU) 2022/2367 of 3 December 2022

      L 311I

    1

    3.12.2022

    ►M19

    COMMISSION IMPLEMENTING REGULATION (EU) 2022/2368 of 3 December 2022

      L 311I

    5

    3.12.2022

    ►M20

    COUNCIL REGULATION (EU) 2022/2474 of 16 December 2022

      L 322I

    1

    16.12.2022

     M21

    COUNCIL IMPLEMENTING REGULATION (EU) 2023/180 of 27 January 2023

      L 26

    1

    30.1.2023

    ►M22

    COUNCIL REGULATION (EU) 2023/250 of 4 February 2023

      L 32I

    1

    4.2.2023

    ►M23

    COMMISSION IMPLEMENTING REGULATION (EU) 2023/251 of 4 February 2023

      L 32I

    4

    4.2.2023

    ►M24

    COUNCIL REGULATION (EU) 2023/427 of 25 February 2023

      L 59I

    6

    25.2.2023

    ►M25

    COUNCIL REGULATION (EU) 2023/1214 of 23 June 2023

      L 159I

    1

    23.6.2023

    ►M26

    COUNCIL REGULATION (EU) 2023/2878 of 18 December 2023

      L 

    1

    18.12.2023

    ►M27

    COUNCIL REGULATION (EU) 2024/576 of 12 February 2024

      L 

    1

    14.2.2024

    ►M28

    COUNCIL REGULATION (EU) 2024/745 of 23 February 2024

      L 

    1

    23.2.2024


    Corrected by:

    ►C1

    Corrigendum, OJ L 246, 21.8.2014, p.  59 (833/2014)

     C2

    Corrigendum, OJ L 114, 12.4.2022, p.  214 (No 833/2014)

     C3

    Corrigendum, OJ L 114, 12.4.2022, p.  212 (2022/328)

     C4

    Corrigendum, OJ L 119, 21.4.2022, p.  114 (2022/394)

    ►C5

    Corrigendum, OJ L 190, 19.7.2022, p.  191 (2022/576)

     C6

    Corrigendum, OJ L 202, 2.8.2022, p.  58 (2022/576)




    ▼B

    COUNCIL REGULATION (EU) No 833/2014

    of 31 July 2014

    concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine



    ▼M7

    Article 1

    For the purposes of this Regulation, the following definitions apply:

    (a) 

    ‘dual-use goods and technology’ means the items listed in Annex I to Regulation (EU) 2021/821 of the European Parliament and of the Council ( 1 );

    (b) 

    ‘competent authorities’ means the competent authorities of the Member States as identified on the websites listed in Annex I;

    (c) 

    ‘technical assistance’ means any technical support related to repairs, development, manufacture, assembly, testing, maintenance, or any other technical service, and may take forms such as instruction, advice, training, transmission of working knowledge or skills or consulting services, including verbal forms of assistance;

    (d) 

    ‘brokering services’ means:

    (i) 

    the negotiation or arrangement of transactions for the purchase, sale or supply of goods and technology or of financial and technical services, including from a third country to any other third country, or

    (ii) 

    the selling or buying of goods and technology or of financial and technical services, including where they are located in third countries for their transfer to another third country;

    (e) 

    ‘investment services’ means the following services and activities:

    (i) 

    reception and transmission of orders in relation to one or more financial instruments;

    (ii) 

    execution of orders on behalf of clients;

    (iii) 

    dealing on own account;

    (iv) 

    portfolio management;

    (v) 

    investment advice;

    (vi) 

    underwriting of financial instruments and/or placing of financial instruments on a firm commitment basis;

    (vii) 

    placing of financial instruments without a firm commitment basis;

    (viii) 

    any service in relation to the admission to trading on a regulated market or trading on a multilateral trading facility;

    (f) 

    ▼M11

    ‘transferable securities’ means the following classes of securities, including in the form of crypto-assets, which are negotiable on the capital market, with the exception of instruments of payment:

    ▼M7

    (i) 

    shares in companies and other securities equivalent to shares in companies, partnerships or other entities, and depositary receipts in respect of shares,

    (ii) 

    bonds or other forms of securitised debt, including depositary receipts in respect of such securities,

    (iii) 

    any other securities giving the right to acquire or sell any such transferable securities or giving rise to a cash settlement determined by reference to transferable securities;

    (g) 

    ‘money-market instruments’ means those classes of instruments which are normally dealt in on the money market, such as treasury bills, certificates of deposit and commercial papers and excluding instruments of payment;

    (h) 

    ‘credit institution’ means an undertaking, the business of which is to take deposits or other repayable funds from the public and to grant credit for its own account;

    (i) 

    ‘territory of the Union’ means the territories of the Member States to which the Treaty is applicable, under the conditions laid down in the Treaty, including their airspace;

    (j) 

    ‘central securities depository’ means a legal person as defined in point 1 of Article 2(1) of Regulation (EU) No 909/2014 of the European Parliament and of the Council ( 2 );

    (k) 

    ‘deposit’ means a credit balance which results from funds left in an account or from temporary situations deriving from normal banking transactions and which a credit institution is required to repay under the legal and contractual conditions applicable, including a fixed-term deposit and a savings deposit, but excluding a credit balance where:

    (i) 

    its existence can only be proven by a financial instrument as defined in Article 4(1)(15) of Directive 2014/65/EU of the European Parliament and of the Council ( 3 ), unless it is a savings product which is evidenced by a certificate of deposit made out to a named person and which exists in a Member State on 2 July 2014;

    (ii) 

    its principal is not repayable at par;

    (iii) 

    its principal is only repayable at par under a particular guarantee or agreement provided by the credit institution or a third party;

    (l) 

    ‘investor citizenship schemes’ (or ‘golden passports’) means the procedures put in place by a Member State, which allow third-country nationals to acquire its nationality in exchange for pre-determined payments and investments;

    (m) 

    ‘investor residence schemes’ (or ‘golden visas’) means the procedures put in place by a Member State, which allow third-country nationals to obtain a residence permit in a Member State in exchange for pre-determined payments and investments;

    (n) 

    ‘trading venue’, as defined in Article 4(1)(24) of Directive 2014/65/EU, means a regulated market, a multilateral trading facility (MTF) or an organised trading facility (OTF);

    (o) 

    ‘financing or financial assistance’ means any action, irrespective of the particular means chosen, whereby the person, entity or body concerned, conditionally or unconditionally, disburses or commits to disburse its own funds or economic resources, including but not limited to grants, loans, guarantees, suretyships, bonds, letters of credit, supplier credits, buyer credits, import or export advances and all types of insurance and reinsurance, including export credit insurance; payment as well as terms and conditions of payment of the agreed price for a good or a service, made in line with normal business practice, do not constitute financing or financial assistance;

    (p) 

    ‘partner country’ means a country applying a set of export control measures substantially equivalent to those set out in this Regulation, as identified in Annex VIII;

    (q) 

    ‘consumer communication devices’ means devices used by private individuals such as personal computers and peripherals (including hard drives and printers), mobile telephones, smart televisions, memory devices (USB drives), and consumer software for all of these items;

    ▼M8

    (r) 

    ‘Russian air carrier’ means an air transport undertaking holding a valid operating licence or equivalent issued by the competent authorities of the Russian Federation;

    ▼M12

    (s) 

    ‘credit rating’ means an opinion regarding the creditworthiness of an entity, a debt or financial obligation, debt security, preferred share or other financial instrument, or of an issuer of such a debt or financial obligation, debt security, preferred share or other financial instrument, issued using an established and defined ranking system of rating categories;

    (t) 

    ‘credit rating activities’ means data and information analysis and the evaluation, approval, issuing and review of credit ratings;

    (u) 

    ▼M26

    ‘energy sector’ means a sector covering the following activities with the exception of civil nuclear related activities, such as the Paks II project:

    ▼M12

    (i) 

    the exploration, production, distribution within Russia or mining of crude oil, natural gas or solid fossil fuels, the refining of fuels, the liquefaction of natural gas or regasification;

    (ii) 

    the manufacture or distribution within Russia of solid fossil fuel products, refined petroleum products or gas; or

    (iii) 

    the construction of facilities or installation of equipment for, or the provision of services, equipment or technology for, activities related to power generation or electricity production;

    ▼M13

    (v) 

    ‘public procurement Directives’ means Directives 2014/23/EU ( 4 ), 2014/24/EU ( 5 ), 2014/25/EU ( 6 ) and 2009/81/EC ( 7 ) of the European Parliament and of the Council;

    (w) 

    ‘road transport undertaking’ means any natural or legal person, entity or body engaged with a commercial purpose in the transport of freight by means of motor vehicles or combinations of vehicles;

    ▼M20

    (x) 

    ‘mining and quarrying sector’ means a sector covering the location, extraction, management and processing activities relating to non-energy producing materials;

    ▼M24

    (y) 

    ‘critical entities’ means entities as defined in Article 2(1) of Directive (EU) 2022/2557 of the European Parliament and of the Council ( 8 );

    (z) 

    ‘critical infrastructure’ means infrastructure as defined in Article 2(a) of Council Directive 2008/114/EC ( 9 ) and Article 2(4) of Directive (EU) 2022/2557;

    (za) 

    ‘European critical infrastructure’ means infrastructure as defined in Article 2(b) of Directive 2008/114/EC;

    (zb) 

    ‘owners or operators of critical infrastructures’ means those entities responsible for investments in, and/or day- to-day operation of, a particular asset, system or part thereof designated as critical infrastructure or European critical infrastructure;

    ▼M26

    (zc) 

    ‘partner country for importation of iron and steel’ means a country applying a set of restrictive measures on imports of iron and steel substantially equivalent to those set out in Article 3g, and a set of import control measures substantially equivalent to those set out in that Article, as identified in Annex XXXVI;

    (zd) 

    ‘funds’ means financial assets and benefits of every kind, including, but not limited to:

    (i) 

    cash, cheques, claims on money, drafts, money orders and other payment instruments;

    (ii) 

    deposits with financial institutions or other entities, balances on accounts, debts and debt obligations;

    (iii) 

    publicly- and privately-traded securities and debt instruments, including stocks and shares, certificates representing securities, bonds, notes, warrants, debentures and derivatives contracts;

    (iv) 

    interest, dividends or other income on or value accruing from or generated by assets;

    (v) 

    credit, right of set-off, guarantees, performance bonds or other financial commitments;

    (vi) 

    letters of credit, bills of lading, bills of sale; and

    (vii) 

    documents showing evidence of an interest in funds or financial resources.

    ▼M7

    Article 2

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, dual-use goods and technology, whether or not originating in the Union, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M24

    1a.  
    The transit via the territory of Russia of the dual-use goods and technology, as referred to in paragraph 1, exported from the Union shall be prohibited.

    ▼M7

    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M7

    3.  

    Without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the prohibitions in paragraphs 1 and 2 of this Article shall not apply to the sale, supply, transfer or export of dual-use goods and technology or to the related provision of technical and financial assistance, for non-military use and for a non-military end user, intended for:

    (a) 

    humanitarian purposes, health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment or as a response to natural disasters;

    (b) 

    medical or pharmaceutical purposes;

    (c) 

    temporary export of items for use by news media;

    (d) 

    software updates;

    (e) 

    use as consumer communication devices; or

    ▼M16 —————

    ▼M7

    (g) 

    personal use of natural persons travelling to Russia or members of their immediate families travelling with them, and limited to personal effects, household effects, vehicles or tools of trade owned by those individuals and not intended for sale.

    ▼M16

    With the exception of point (g) of the first subparagraph, the exporter shall declare in the customs declaration that the items are being exported under the relevant exception set out in this paragraph and shall notify the competent authority of the Member State where the exporter is resident or established of the first use of the relevant exception within 30 days from the date when the first export took place.

    ▼M24

    3a.  
    Without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the prohibition in paragraph 1a of this Article shall not apply to the transit via the territory of Russia of dual-use goods and technology intended for the purposes set out in points (a) to (e) of paragraph 3 of this Article.

    ▼M7

    4.  

    By way of derogation from paragraphs 1 and 2 of this Article, and without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the competent authorities may authorise the sale, supply, transfer or export of dual-use goods and technology or the provision of related technical or financial assistance, for non-military use and for a non-military end user, after having determined that such goods or technology or the related technical or financial assistance are:

    (a) 

    intended for cooperation between the Union, the governments of Member States and the government of Russia in purely civilian matters;

    (b) 

    intended for intergovernmental cooperation in space programmes;

    ▼M26

    (c) 

    intended for the operation, maintenance, fuel retreatment and safety of civil nuclear capabilities, such as the Paks II project, as well as civil nuclear cooperation, in particular in the field of research and development;

    ▼M7

    (d) 

    intended for maritime safety;

    ▼M13

    (e) 

    intended for civilian non-publicly available electronic communications networks which are not the property of an entity that is publicly controlled or with over 50 % public ownership;

    ▼M7

    (f) 

    intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State or of a partner country;

    (g) 

    intended for the diplomatic representations of the Union, Member States and partner countries, including delegations, embassies and missions;

    ▼M16

    (h) 

    intended for ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government.

    ▼M24

    4a.  
    By way of derogation from paragraph 1a, and without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the competent authorities may authorise the transit via the territory of Russia of dual-use goods and technology after having determined that such goods or technology are intended for the purposes set out in points (b), (c), (d), and (h) of paragraph 4 of this Article.

    ▼M7

    5.  
    By way of derogation from paragraphs 1 and 2 of this Article, and without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the competent authorities may authorise the sale, supply, transfer or export of dual-use goods and technology or the provision of related technical or financial assistance, for non-military use and for a non-military end-user, after having determined that such goods or technology or the related technical or financial assistance are due under contracts concluded before 26 February 2022, or ancillary contracts necessary for the execution of such a contract, provided that the authorisation is requested before 1 May 2022.
    6.  
    All authorisations required under this Article shall be granted by the competent authorities in accordance with the rules and procedures laid down in Regulation (EU) 2021/821, which shall apply mutatis mutandis. The authorisation shall be valid throughout the Union.
    7.  

    When deciding on requests for authorisations referred to in paragraphs 4 and 5, the competent authorities shall not grant an authorisation if they have reasonable grounds to believe that:

    ▼M13

    (i) 

    the end-user might be a military end-user, a natural or legal person, entity or body in Annex IV or that the goods might have a military end-use, unless the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is allowed under paragraph 1(a) of Article 2b;

    (ii) 

    the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for aviation or the space industry, unless such sale, supply, transfer or export or the provision of related technical or financial assistance is allowed under paragraph 4(b); or

    ▼M12

    (iii) 

    the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for the energy sector, unless such a sale, supply, transfer or export or the related technical or financial assistance is allowed under the exceptions referred to in paragraphs 3 to 6 of Article 3.

    ▼M7

    8.  
    The competent authorities may annul, suspend, modify or revoke an authorisation which they have granted pursuant to paragraphs 4 and 5 if they deem that such annulment, suspension, modification or revocation is necessary for the effective implementation of this Regulation.

    Article 2a

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, goods and technology which might contribute to Russia’s military and technological enhancement, or the development of the defence and security sector, as listed in Annex VII, whether or not originating in the Union, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M25

    1a.  
    The transit via the territory of Russia of goods and technology which might contribute to Russia’s military and technological enhancement or to the development of its defence and security sector, as listed in Annex VII, exported from the Union, shall be prohibited.

    ▼M7

    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of these goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M7

    3.  

    The prohibitions in paragraphs 1 and 2 shall not apply to the sale, supply, transfer or export of the goods and technology referred to in paragraph 1 or to the related provision of technical and financial assistance, for non-military use and for a non-military end-user, intended for:

    (a) 

    humanitarian purposes, health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment, or as a response to natural disasters;

    (b) 

    medical or pharmaceutical purposes;

    (c) 

    temporary export of items for use by news media;

    (d) 

    software updates;

    (e) 

    use as consumer communication devices; or

    ▼M16 —————

    ▼M7

    (g) 

    personal use of natural persons travelling to Russia or members of their immediate families travelling with them, and limited to personal effects, household effects, vehicles or tools of trade owned by those individuals and not intended for sale.

    ▼M16

    With the exception of point (g) of the first subparagraph, the exporter shall declare in the customs declaration that the items are being exported under the relevant exception set out in this paragraph and shall notify the competent authority of the Member State where the exporter is resident or established of the first use of the relevant exception within 30 days from the date when the first export took place.

    ▼M25

    3a.  
    The prohibition in paragraph 1a shall not apply to the transit via the territory of Russia of goods and technology which might contribute to Russia’s military and technological enhancement or to the development of its defence and security sector, as listed in Annex VII, intended for the purposes set out in points (a) to (e) of paragraph 3.

    ▼M7

    4.  

    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the sale, supply, transfer or export of the goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance, for non-military use and for a non-military end-user, after having determined that such goods or technology or the related technical or financial assistance are:

    (a) 

    intended for cooperation between the Union, the governments of Member States and the government of Russia in purely civilian matters;

    (b) 

    intended for intergovernmental cooperation in space programmes;

    ▼M26

    (c) 

    intended for the operation, maintenance, fuel retreatment and safety of civil nuclear capabilities, such as the Paks II project, as well as civil nuclear cooperation, in particular in the field of research and development;

    ▼M7

    (d) 

    intended for maritime safety;

    ▼M13

    (e) 

    intended for civilian non-publicly available electronic communications networks which are not the property of an entity that is publicly controlled or with over 50 % public ownership;

    ▼M7

    (f) 

    intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State or of a partner country; or

    (g) 

    intended for the diplomatic representations of the Union, Member States and partner countries, including delegations, embassies and missions;

    ▼M16

    (h) 

    intended for ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government; or

    ▼M25

    (i) 

    intended for the exclusive use and under the full control of the authorising Member State and in order to fulfil its maintenance obligations in areas which are under a long-term lease agreement between that Member State and the Russian Federation.

    4a.  
    By way of derogation from paragraph 1a, the competent authorities may authorise the transit via the territory of Russia of goods and technology which might contribute to Russia’s military and technological enhancement or to the development of its defence and security sector, as listed in Annex VII, after having determined that such goods or technology are intended for the purposes set out in points (b), (c), (d), and (h) of paragraph 4.

    ▼M7

    5.  
    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the sale, supply, transfer or export of the goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance, for non-military use and for a non-military end-user, after having determined that such goods or technology or the related technical or financial assistance are due under contracts concluded before 26 February 2022, or ancillary contracts necessary for the execution of such a contract, provided that the authorisation is requested before 1 May 2022.
    6.  
    All authorisations required under this Article shall be granted by the competent authorities in accordance with the rules and procedures laid down in Regulation (EU) 2021/821, which shall apply mutatis mutandis. The authorisation shall be valid throughout the Union.
    7.  

    When deciding on requests for authorisations referred to in paragraphs 4 and 5, the competent authorities shall not grant an authorisation if they have reasonable grounds to believe that:

    ▼M13

    (i) 

    the end-user might be a military end-user, a natural or legal person, entity or body in Annex IV or that the goods might have a military end-use, unless the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is allowed under paragraph 1 of Article 2b;

    (ii) 

    the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for aviation or the space industry, unless such sale, supply, transfer or export or the provision of related technical or financial assistance is allowed under paragraph 4(b); or

    ▼M12

    (iii) 

    the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for the energy sector, unless such a sale, supply, transfer or export or the related technical or financial assistance is allowed under the exceptions referred to in paragraphs 3 to 6 of Article 3.

    ▼M7

    8.  
    The competent authorities may annul, suspend, modify or revoke an authorisation which they have granted pursuant to paragraphs 4 and 5 if they deem that such annulment, suspension, modification or revocation is necessary for the effective implementation of this Regulation.

    ▼M17

    Article 2aa

    ▼M25

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, firearms, their parts and essential components and ammunition as listed in Annex I to Regulation (EU) No 258/2012 of the European Parliament and of the Council ( 10 ) and firearms and other arms as listed in Annex XXXV to this Regulation, whether or not originating in the Union, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M24

    1a.  
    The transit via the territory of Russia of firearms, their parts and essential components and ammunition, as referred to in paragraph 1, exported from the Union shall be prohibited.

    ▼M17

    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;

    (b) 

    provide financing or financial assistance related to the goods referred to in paragraph 1 for any sale, supply, transfer or export of those goods, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M7

    Article 2b

    ▼M12

    1.  

    With regard to the natural or legal persons, entities or bodies listed in Annex IV, by way of derogation from Article 2(1) and (2) and Article 2a(1) and (2), and without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the competent authorities may only authorise the sale, supply, transfer or export of dual use goods and technology, and goods and technology listed in Annex VII, or the provision of related technical or financial assistance after having determined that:

    ▼M7

    (a) 

    such goods or technology or the related technical or financial assistance are necessary for the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment; or

    (b) 

    such goods or technology or the related technical or financial assistance are due under contracts concluded before 26 February 2022, or ancillary contracts necessary for the execution of such a contract, provided that the authorisation is requested before 1 May 2022.

    2.  
    All authorisations required under this Article shall be granted by the competent authorities of the Member State in accordance with the rules and procedures laid down in Regulation (EU) 2021/821, which shall apply mutatis mutandis. The authorisation shall be valid throughout the Union.
    3.  
    The competent authorities may annul, suspend, modify or revoke an authorisation which they have granted pursuant to paragraph 1 if they deem that such annulment, suspension, modification or revocation is necessary for the effective implementation of this Regulation.

    Article 2c

    1.  
    The notification to the competent authority referred to in Articles 2(3) and 2a(3) shall be submitted by electronic means, whenever possible, on forms containing at least all the elements of, and in the order provided for in, the models set out in Annex IX.
    2.  
    All authorisations referred to in Articles 2, 2a and 2b shall be issued by electronic means, whenever possible, on forms containing at least all the elements of, and in the order provided for in, the models set out in Annex IX.

    Article 2d

    ▼M25

    1.  
    The competent authorities shall exchange information on the application of Articles 2, 2a and 2b with the other Member States and the Commission, including on any authorisation granted or denied and, in the event of suspected forum shopping or other cases as appropriate, on requests for authorisation received.

    The competent authorities shall exchange information on the enforcement of Articles 2, 2a and 2b with the other Member States and the Commission, including on related infringements and penalties, as well as best practices of national enforcement authorities and the detection and prosecution of unauthorised exports. The exchange of information shall be carried out using the electronic system provided pursuant to Article 23(6) of Regulation (EU) 2021/821.

    ▼M7

    2.  
    Information received as a result of the application of this Article shall be used only for the purpose for which it was requested, including the exchanges mentioned in paragraph 4.

    Member States and the Commission shall ensure the protection of confidential information acquired in application of this Article in accordance with Union law and the respective national law.

    Member States and the Commission shall ensure that classified information provided or exchanged under this Article is not downgraded or declassified without the prior written consent of the originator.

    3.  
    Before a Member State grants an authorisation in accordance with Articles 2, 2a and 2b for a transaction which is essentially identical to a transaction which is the subject of a still valid denial issued by another Member State or by other Member States, it shall first consult the Member State or Member States which issued the denial. If, following such consultations, the Member State concerned decides to grant an authorisation, it shall inform the other Member States and the Commission thereof, providing all relevant information to explain the decision.

    ▼M11

    3a.  
    When a Member State grants an authorisation in accordance with Articles 2(4)(d), 2a(4)(d) and 3f(4) for the sale, supply, transfer or export of the goods and technology intended for maritime safety, it shall inform the other Member States and the Commission within two weeks of the authorisation.

    ▼M9

    4.  
    The Commission, in consultation with the Member States shall, where appropriate and on the basis of reciprocity, exchange information with partner countries, with a view to supporting the effectiveness of export control measures under this Regulation and the consistent application of export control measures applied by partner countries.

    ▼M7

    Article 2e

    1.  
    It shall be prohibited to provide public financing or financial assistance for trade with, or investment in, Russia.
    2.  

    The prohibition in paragraph 1 shall not apply to:

    (a) 

    binding financing or financial assistance commitments established prior to 26 February 2022;

    ▼M11

    (b) 

    the provision of public financing or financial assistance up to the total value of 10 000 000  EUR per project benefiting small and medium-sized enterprises established in the Union; or

    ▼M7

    (c) 

    the provision of public financing or financial assistance for trade in food, and for agricultural, medical or humanitarian purposes.

    ▼M9

    3.  
    It shall be prohibited to invest, participate or otherwise contribute to projects co-financed by the Russian Direct Investment Fund.
    4.  
    By way of derogation from paragraph 3, the competent authorities may authorise, under such conditions as they deem appropriate, an investment participation in, or contribution to, projects co-financed by the Russian Direct Investment Fund, after having determined that such an investment participation or contribution is due under contracts concluded before 2 March 2022 or ancillary contracts necessary for the execution of such contracts.

    ▼M10

    Article 2f

    1.  
    It shall be prohibited for operators to broadcast or to enable, facilitate or otherwise contribute to broadcast, any content by the legal persons, entities or bodies listed in Annex XV, including through transmission or distribution by any means such as cable, satellite, IP-TV, internet service providers, internet video-sharing platforms or applications, whether new or pre-installed.
    2.  
    Any broadcasting licence or authorisation, transmission and distribution arrangement with the legal persons, entities or bodies listed in Annex XV shall be suspended.

    ▼M15

    3.  
    It shall be prohibited to advertise products or services in any content produced or broadcast by the legal persons, entities or bodies listed in Annex XV, including through transmission or distribution by any of the means referred to in paragraph 1.

    ▼M12

    Article 3

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, goods or technology, as listed in Annex II, whether or not originating in the Union, to any natural or legal person, entity or body in Russia, including its Exclusive Economic Zone and Continental Shelf, or for use in Russia, including its Exclusive Economic Zone and Continental Shelf.
    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M12

    3.  

    The prohibitions in paragraphs 1 and 2 shall not apply to the sale, supply, transfer or export of goods or technology, or to the provision of technical or financial assistance, necessary for:

    ▼M15

    (a) 

    the transport of natural gas and oil, including refined petroleum products, unless prohibited under Article 3m or 3n, from or through Russia into the Union; or

    ▼M12

    (b) 

    the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment.

    ▼M26

    4.  
    The prohibitions in paragraph 2 shall not apply until 20 June 2024 to the provision of insurance or reinsurance to any legal person, entity or body that is incorporated or constituted under the law of a Member State with regard to its activities outside the energy sector in Russia.
    5.  
    By way of derogation from paragraph 2, the competent authorities may authorise, under such conditions as they deem appropriate, the provision of insurance or reinsurance after 20 June 2024 to any legal person, entity or body that is incorporated or constituted under the law of a Member State with regard to its activities outside the energy sector in Russia.

    ▼M12

    6.  

    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export and the provision of technical or financial assistance, after having determined that:

    (a) 

    it is necessary for ensuring critical energy supply within the Union; or

    (b) 

    it is intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State.

    7.  
    The Member State or Member States concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 6 within two weeks of the authorisation.

    ▼M20

    Article 3a

    1.  

    It shall be prohibited to:

    (a) 

    acquire any new or extend any existing participation in any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the energy sector in Russia;

    (b) 

    grant or be part of any arrangement to grant any new loan or credit or otherwise provide financing, including equity capital, to any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the energy sector in Russia, or for the documented purpose of financing such a legal person, entity or body;

    (c) 

    create any new joint venture with any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the energy sector in Russia;

    (d) 

    provide investment services directly related to the activities referred to in points (a), (b) and (c).

    2.  

    It shall be prohibited to:

    (a) 

    acquire any new or extend any existing participation in any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the mining and quarrying sector in Russia;

    (b) 

    grant or be part of any arrangement to grant any new loan or credit or otherwise provide financing, including equity capital, to any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the mining and quarrying sector in Russia, or for the documented purpose of financing such a legal person, entity or body;

    (c) 

    create any new joint venture with any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the mining and quarrying sector in Russia;

    (d) 

    provide investment services directly related to the activities referred to in points (a), (b) and (c).

    3.  

    By way of derogation from paragraph 1, the competent authorities may authorise, under such conditions as they deem appropriate, any activity referred to in paragraph 1 after having determined that:

    (a) 

    it is necessary to ensure critical energy supply within the Union, as well as the transport of natural gas and oil, including refined petroleum products, unless prohibited under Article 3m or 3n, from or through Russia into the Union; or

    (b) 

    it exclusively concerns a legal person, entity or body operating in the energy sector in Russia owned by a legal person, entity or body which is incorporated or constituted under the law of a Member State.

    ▼M26

    3a.  
    By way of derogation from point (b) of paragraph 1 of this Article, the competent authorities may authorise, under such conditions as they deem appropriate, any activity referred to therein after having determined that, in accordance with point (b) of Article 5aa(3), such an activity is necessary to ensure the operation of a deep-water offshore gas project in the Mediterranean Sea in which a legal person, entity or body listed in Annex XIX was a minority shareholder before 31 October 2017 and remains so, provided that the project is solely or jointly controlled or operated by a legal person incorporated or constituted under the law of a Member State.

    ▼M20

    4.  
    The Member State or Member States concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 3 within two weeks of the authorisation.
    5.  
    The prohibition in paragraph 2 shall not apply to mining and quarrying activities that yield their highest value from, or have as their primary objective, the production of any of the materials listed in Annex XXX.

    ▼M7

    Article 3b

    ▼M13

    1.  
    It shall be prohibited to sell, supply, transfer, or export, directly or indirectly, goods and technology suited for use in oil refining and liquefaction of natural gas, as listed in Annex X, whether or not originating in the Union, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M7

    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any person, entity or body in Russia or for use in Russia;

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M7

    3.  
    The prohibitions in paragraphs 1 and 2 shall not apply to the execution until 27 May 2022 of contracts concluded before 26 February 2022, or ancillary contracts necessary for the execution of such contracts.
    4.  
    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export of the goods and technology listed in Annex X or the provision of related technical or financial assistance, after having determined that such goods or technology or the provision of related technical or financial assistance are necessary for the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment.

    In duly justified cases of emergency, the sale, supply, transfer or export may proceed without prior authorisation, provided that the exporter notifies the competent authority within five working days after the sale, supply, transfer or export has taken place, providing detail about the relevant justification for the sale, supply, transfer or export without prior authorisation.

    ▼M16

    5.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 4 within two weeks of the authorisation.

    ▼M7

    Article 3c

    ▼M13

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, goods and technology suited for use in aviation or the space industry, as listed in Annex XI, and jet fuel and fuel additives as listed in Annex XX, whether or not originating in the Union, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M25

    1a.  
    The transit via the territory of Russia of goods and technology suited for use in aviation or the space industry, as listed in Annex XI, and of jet fuel and fuel additives, as listed in Annex XX, exported from the Union, shall be prohibited.

    ▼M7

    2.  
    It shall be prohibited to provide insurance and reinsurance, directly or indirectly, in relation to goods and technology listed in Annex XI to any person, entity or body in Russia or for use in Russia.
    3.  
    It shall be prohibited to provide any one or any combination of the following activities: overhaul, repair, inspection, replacement, modification or defect rectification of an aircraft or component, with the exception of pre-flight inspection, in relation to the goods and technology listed in Annex XI, directly or indirectly, to any natural or legal person, entity or body in Russia or for use in Russia.
    4.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M26 —————

    ▼M13

    6.  

    By way of derogation from paragraphs 1 and 4, the national competent authorities may authorise, under such conditions as they deem appropriate, the execution of an aircraft financial lease concluded before 26 February 2022 after having determined that:

    (a) 

    it is strictly necessary to ensure lease re-payments to a legal person, entity or body incorporated or constituted under the law of a Member State which does not fall under any of the restrictive measures provided for in this Regulation; and

    (b) 

    no economic resources will be made available to the Russian counterpart, with the exception of the transfer of ownership of the aircraft after full reimbursement of the financial lease.

    ▼M17

    6a.  
    By way of derogation from paragraphs 1 and 4, the competent authorities may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export of the goods listed in Part B of Annex XI, or related technical assistance, brokering services, financing or financial assistance, after having determined that it is necessary for the production of titanium goods required in the aeronautic industry, for which no alternative supply is available.

    ▼M20

    6b.  
    By way of derogation from paragraph 4, the competent authorities may authorise, under such conditions as they deem appropriate, the provision of technical assistance, related to the use of the goods and technology referred to in paragraph 1, after having determined that the provision of such technical assistance is necessary for avoiding collision between satellites, or their unintended re-entry into the atmosphere.
    6c.  
    By way of derogation from paragraphs 1 and 4, the competent authorities may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export of the goods falling under CN codes 8517 71 00 , 8517 79 00 and 9026 00 00 listed in Part B of Annex XI, or related technical assistance, brokering services, financing or financial assistance, after having determined that it is necessary for medical or pharmaceutical purposes, or for humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations.

    When deciding on requests for authorisations for medical, pharmaceutical or humanitarian purposes in accordance with this paragraph, the national competent authorities shall not grant an authorisation for exports to any natural or legal person, entity or body in Russia or for use in Russia, if they have reasonable grounds to believe that the goods might have a military end-use.

    ▼M25

    6d.  
    By way of derogation from paragraph 1a, the competent authorities may authorise the transit via the territory of Russia of goods and technology suited for use in aviation or the space industry, as listed in Annex XI, and of jet fuels and fuel additives as listed in Annex XX, after having determined that such goods or technology are intended for the purposes set out in paragraphs 6a, 6b and 6c of this Article.
    6e.  
    By way of derogation from paragraph 1, the competent authorities may authorise the sale, supply, transfer or export of the goods listed in Part B of Annex XI, if the goods are intended for the exclusive use and under the full control of the authorising Member State and in order to fulfil its maintenance obligations in areas which are under a long-term lease agreement between that Member State and the Russian Federation.

    ▼M13

    7.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisations granted under this Article within two weeks of the authorisation.
    8.  
    The prohibition in paragraph 1 shall be without prejudice to Articles 2(4)(b) and 2a(4)(b).

    ▼M16

    9.  
    The prohibition in paragraph 4 point (a) shall not apply to the exchange of information aimed at establishing technical standards in the framework of the International Civil Aviation Organization in relation to goods and technology referred to in paragraph 1.

    ▼M8

    Article 3d

    1.  
    It shall be prohibited for any aircraft operated by Russian air carriers, including as a marketing carrier in code-sharing or blocked-space arrangements, or for any Russian registered aircraft, or for any non-Russian-registered aircraft which is owned or chartered, or otherwise controlled by any Russian natural or legal person, entity or body, to land in, take off from or overfly the territory of the Union.
    2.  
    Paragraph 1 shall not apply in the case of an emergency landing or an emergency overflight.
    3.  
    By way of derogation from paragraph 1, the competent authorities may authorise an aircraft to land in, take off from, or overfly, the territory of the Union if the competent authorities have determined that such landing, take-off or overflight is required for humanitarian purposes or for any other purpose consistent with the objectives of this Regulation.
    4.  
    The Member State or Member States concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 3 within two weeks of the authorisation.

    ▼M25

    5.  
    Aircraft operators of non-scheduled flights between Russia and the Union, operated directly or via a third country, shall notify prior to their operation, and at least 48 hours in advance, all relevant information concerning the flight to the competent authorities of the Members State of departure or destination.

    ▼M24

    6.  
    Upon refusal of a f light notified in accordance with paragraph 5, the Member State concerned shall immediately inform the other Member States, the Network Manager and the Commission.

    ▼M8

    Article 3e

    ▼M12

    1.  
    The Network Manager for air traffic management network functions of the single European sky shall support the Commission and the Member States in ensuring the implementation of, and compliance with, Article 3d. The Network Manager shall, in particular, reject all flight plans filed by aircraft operators indicating an intent to carry out activities over the territory of the Union that constitute a violation of this Regulation, such that the pilot is not permitted to fly.

    ▼M8

    2.  
    The Network Manager shall regularly supply to the Commission and the Member States, based on the analysis of flight plans, reports on the implementation of Article 3d.

    ▼M13

    Article 3ea

    ▼M16

    1.  
    It shall be prohibited to provide access, after 16 April 2022, to ports and, after 29 July 2022, to locks in the territory of the Union, to any vessel registered under the flag of Russia, with the exception of access to locks for the purpose of leaving the territory of the Union.

    ▼M17

    1a.  
    The prohibition in paragraph 1 shall also apply, after 8 April 2023, to any vessel certified by the Russian Maritime Register of Shipping.

    ▼M13

    2.  
    Paragraph 1 shall apply to vessels that have changed their Russian flag or their registration, to the flag or register of any other State after 24 February 2022.

    ▼M17

    3.  

    For the purposes of this Article, with the exception of paragraph 1a, a ‘vessel’ means:

    ▼M13

    (a) 

    a ship falling within the scope of the relevant international conventions;

    (b) 

    a yacht, of 15 metres in length or more, which does not carry cargo and carrying no more than 12 passengers; or

    (c) 

    recreational craft or personal watercraft as defined in Directive 2013/53/EU of the European Parliament and of the Council ( 11 ).

    ▼M17

    4.  
    Paragraphs 1 and 1a shall not apply in the case of a vessel in need of assistance seeking a place of refuge, of an emergency port call for reasons of maritime safety, or for saving life at sea.
    5.  

    By way of derogation from paragraphs 1 and 1a, the competent authorities may authorise a vessel to access a port or lock, under such conditions as they deem appropriate, after having determined that the access is necessary for:

    ▼M15

    (a) 

    unless prohibited under Article 3m or 3n, the purchase, import or transport into the Union of natural gas and oil, including refined petroleum products, titanium, aluminium, copper, nickel, palladium and iron ore, as well as certain chemical and iron products as listed in Annex XXIV;

    ▼M13

    (b) 

    the purchase, import or transport of pharmaceutical, medical, agricultural and food products, including wheat and fertilisers whose import, purchase and transport is allowed under this Regulation;

    (c) 

    humanitarian purposes; or

    ▼M26

    (d) 

    transport of nuclear fuel and other goods strictly necessary for the functioning of civil nuclear capabilities, such as the Paks II project.

    ▼M25 —————

    ▼M16

    5a.  

    By way of derogation from paragraph 2, the competent authorities may authorise vessels that have changed their Russian flag or their registration, to the flag or register of any other State prior to 16 April 2022, to access a port or a lock, under such conditions as they deem appropriate, after having determined that:

    (a) 

    a Russian flag or registration was required by contract; and

    (b) 

    the access is necessary for the unloading of goods strictly necessary for the completion of renewable energy projects in the Union, provided that the import of such goods is not otherwise prohibited under this Regulation.

    ▼M17

    5b.  

    By way of derogation from paragraph 2, the competent authorities may authorise, under such conditions as they deem appropriate, a vessel to access a port or lock provided that it:

    (a) 

    has flown the Russian Federation flag under a bareboat charter registration initially effected prior to 24 February 2022;

    (b) 

    has resumed its right to fly the flag of the underlying Member State registry before 31 January 2023; and

    (c) 

    is not owned, chartered, operated or otherwise controlled by a Russian national or any legal person, entity or body incorporated or constituted under the law of the Russian Federation.

    ▼M20

    6.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 5, 5a and 5b within two weeks of the authorisation.

    ▼M25

    Article 3eb

    1.  
    It shall be prohibited, as of 24 July 2023, to provide access to ports and locks in the territory of the Union, by any vessel performing ship-to-ship transfers, at any point of the voyage to a Member State’s ports or locks, if the competent authority has reasonable cause to suspect that the vessel is in breach of the prohibitions set out in Article 3m(1) and (2) and Article 3n(1) and (4).
    2.  
    A competent authority shall not grant access if a vessel does not notify the competent authority at least 48 hours in advance about a ship-to-ship transfer occurring within the Exclusive Economic Zone of a Member State or within 12 nautical miles from the baseline of that Member State’s coast.
    3.  
    Paragraphs 1 and 2 shall not apply in the case of a vessel in need of assistance seeking a place of refuge, of an emergency port call for reasons of maritime safety, or for saving life at sea.
    4.  
    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise a vessel to access a port or lock in the territory of the Union, under such conditions as they deem appropriate, after having determined that such access is necessary for humanitarian purposes.
    5.  
    Upon refusal of a port access call in accordance with paragraphs 1 and 2, the competent authorities concerned shall immediately inform the other competent authorities of the Member States. The Member State concerned shall inform the other Member States and the Commission without delay.
    6.  
    For the purposes of paragraphs 1 and 2, the competent authorities shall use, in addition to any national system and information, the integrated maritime information available in the Union Maritime Information and Exchange System (SafeSeaNet) established in accordance with Directive 2002/59/EC of the European Parliament and of the Council ( 12 ).

    Article 3ec

    1.  
    It shall be prohibited, as of 24 July 2023, to provide access to ports and locks in the territory of the Union by any vessel which the competent authority has reasonable cause to suspect of illegally interfering with, switching off or otherwise disabling its shipborne automatic identification system at any point of the voyage to a Member State’s ports or locks, in breach of SOLAS Regulation V/19, point 2.4, when transporting crude oil or petroleum products subject to the prohibitions set out in Article 3m(1) and (2) and Article 3n(1) and (4).
    2.  
    Paragraph 1 shall not apply in the case of a vessel in need of assistance seeking a place of refuge, of an emergency port call for reasons of maritime safety, or for saving life at sea.
    3.  
    By way of derogation from paragraph 1, the competent authorities may authorise a vessel to access a port or lock in the territory of the Union, under such conditions as they deem appropriate, after having determined that such access is necessary for humanitarian purposes.
    4.  
    Upon refusal of a port access call in accordance with paragraph 1, the competent authorities concerned shall immediately inform the other competent authorities of the Member States. The Member State concerned shall inform the other Member States and the Commission without delay.
    5.  
    For the purposes of paragraph 1, the competent authorities shall use, in addition to any national system and information, the integrated maritime information available in the Union Maritime Information and Exchange System (SafeSeaNet) established in accordance with Directive 2002/59/EC.

    ▼M11

    Article 3f

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, maritime navigation goods and technology, as listed in Annex XVI, whether or not originating in the Union, to any natural or legal person, entity or body in Russia, for use in Russia, or for the placing on board of a Russian-flagged vessel.
    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M11

    3.  
    The prohibitions in paragraphs 1 and 2 shall not apply to the sale, supply, transfer or export of the goods and technology referred to in paragraph 1 or to the related provision of technical and financial assistance, for non-military use and for a non-military end-user, intended for humanitarian purposes, health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment, or as a response to natural disasters.
    4.  
    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the sale, supply, transfer or export of the goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance, for non-military use and for a non-military end-user, after having determined that such goods or technology or the related technical or financial assistance are intended for maritime safety.

    ▼M16

    5.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 4 within two weeks of the authorisation.

    ▼M12

    Article 3g

    1.  

    It shall be prohibited:

    (a) 

    to import, directly or indirectly, iron and steel products as listed in Annex XVII into the Union if they:

    (i) 

    originate in Russia; or

    (ii) 

    have been exported from Russia;

    (b) 

    to purchase, directly or indirectly, iron and steel products as listed in Annex XVII which are located or which originated in Russia;

    (c) 

    to transport iron and steel products as listed in Annex XVII if they originated in Russia or are being exported from Russia to any other country;

    ▼M26

    (d) 

    to import or purchase, as from 30 September 2023, directly or indirectly, iron and steel products as listed in Annex XVII when processed in a third country incorporating iron and steel products originating in Russia as listed in Annex XVII; with regard to products listed in Annex XVII processed in a third country incorporating steel products originating in Russia of CN codes 7207 11 , 7207 12 10 or 7224 90 , this prohibition shall apply as of 1 April 2024 for CN code 7207 11 and as of 1 October 2028 for CN codes 7207 12 10 and 7224 90 ;

    For the purpose of the application of this point, at the moment of importation, importers shall provide evidence of the country of origin of the iron and steel inputs used for the processing of the product in a third country unless the product is imported from a partner country for importation of iron and steel as listed in Annex XXXVI;

    ▼M17

    (e) 

    to provide, directly or indirectly, technical assistance, brokering services, financing or financial assistance, including financial derivatives, as well as insurance and re-insurance, related to the prohibitions in points (a), (b), (c) and (d).

    ▼M25 —————

    ▼M17

    4.  

    The prohibitions in points (a), (b), (c) and (e) of paragraph 1 shall not apply to the import, purchase or transport, or related technical or financial assistance, of the following quantities of goods falling under CN code 7207 12 10 :

    (a) 

    3 747 905 metric tonnes between 7 October 2022 and 30 September 2023;

    (b) 

    3 747 905 metric tonnes between 1 October 2023 and 30 September 2024;

    ▼M26

    (c) 

    3 185 719 metric tonnes between 1 October 2024 and 30 September 2025;

    (d) 

    2 998 324 metric tonnes between 1 October 2025 and 30 September 2026;

    (e) 

    2 623 534 metric tonnes between 1 October 2026 and 30 September 2027;

    (f) 

    2 061 348 metric tonnes between 1 October 2027 and 30 September 2028.

    ▼M17

    5.  

    The prohibitions in paragraph 1 shall not apply to the import, purchase or transport, or related technical or financial assistance, of the following quantities of goods falling under CN code 7207 11 :

    (a) 

    487 202 metric tonnes between 7 October 2022 and 30 September 2023;

    (b) 

    85 260 metric tonnes between 1 October 2023 and 31 December 2023;

    (c) 

    48 720 metric tonnes between 1 January 2024 and 31 March 2024.

    ▼M20

    5a.  

    The prohibitions in paragraph 1 shall not apply to the import, purchase or transport, or related technical or financial assistance, of the following quantities of the goods falling under CN code 7224 90 :

    (a) 

    147 007 metric tonnes between 17 December 2022 and 31 December 2023;

    (b) 

    110 255 metric tonnes between 1 January 2024 and 30 September 2024;

    ▼M26

    (c) 

    124 956 metric tonnes between 1 October 2024 and 30 September 2025;

    (d) 

    117 606 metric tonnes between 1 October 2025 and 30 September 2026;

    (e) 

    102 905 metric tonnes between 1 October 2026 and 30 September 2027;

    (f) 

    80 854 metric tonnes between 1 October 2027 and 30 September 2028.

    ▼M20

    6.  
    The import volume quotas set out in paragraphs 4, 5 and 5a shall be managed by the Commission and the Member States in accordance with the management system for tariff-rate quotas provided for in Articles 49 to 54 of Commission Implementing Regulation (EU) 2015/2447 ( 13 ).

    ▼M26

    7.  
    By way of derogation from paragraph 1, the competent authorities may authorise the purchase, import or transfer of the goods listed in Annex XVII, under such conditions as they deem appropriate, after having determined that this is necessary for the establishment, operation, maintenance, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, such as the Paks II project, the supply of precursor material for the production of medical radioisotopes and similar medical applications, or critical technology for environmental radiation monitoring, as well as for civil nuclear cooperation, in particular in the field of research and development.

    ▼M17

    8.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 7 within two weeks of the authorisation.

    ▼M12

    Article 3h

    ▼M26

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, luxury goods, whether or not originating in the Union, as listed in Annex XVIII, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M25

    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods referred to in paragraph 1 and related to the provision, manufacture, maintenance and use of those goods, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;

    (b) 

    provide financing or financial assistance related to the goods referred to in paragraph 1 for any sale, supply, transfer or export of those goods, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M25

    2a.  
    The prohibitions referred to in paragraphs 1 and 2 shall apply to the luxury goods listed in Annex XVIII insofar as their value exceeds EUR 300 per item, unless otherwise specified in that Annex.

    ▼M12

    3.  
    The prohibition referred to in paragraph 1 shall not apply to goods which are necessary for the official purposes of diplomatic or consular missions of Member States or partner countries in Russia or of international organisations enjoying immunities in accordance with international law, or to the personal effects of their staff.

    ▼M16

    3a.  
    The prohibition in paragraph 1 shall not apply to goods falling under CN 7113 00 00 and CN 7114 00 00 as listed in Annex XVIII for personal use of natural persons travelling from the European Union or members of their immediate families travelling with them, owned by those individuals and not intended for sale.

    ▼M13

    4.  
    By way of derogation from paragraph 1, the competent authorities may authorise the transfer or export to Russia of cultural goods which are on loan in the context of formal cultural cooperation with Russia.

    ▼M25

    4a.  

    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the sale or supply of a vessel falling under CN code 8901 10 00 or 8901 90 00 , or the provision, until 31 December 2023, of related technical or financial assistance to a legal person, entity or body in Russia or for use in Russia, under such conditions as they deem appropriate, after having determined that:

    (a) 

    the vessel is physically located in Russia on 24 June 2023 and for use in Russia;

    (b) 

    the vessel has flown the Russian Federation flag under a bareboat charter registration initially effected prior to 24 February 2022;

    (c) 

    the legal person, entity or body in Russia is not a military end user and will not use the vessel for military purposes;

    (d) 

    the sale or supply is not for the benefit of a natural or legal person, entity or body listed in Annex I to Regulation (EU) No 269/2014 or subject to the restrictive measures provided for in this Regulation.

    ▼M25

    5.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisations granted under paragraphs 4 and 4a within two weeks of the authorisation.

    ▼M13

    Article 3i

    1.  
    It shall be prohibited to purchase, import, or transfer, directly or indirectly, goods which generate significant revenues for Russia thereby enabling its actions destabilising the situation in Ukraine, as listed in Annex XXI into the Union if they originate in Russia or are exported from Russia.
    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly in relation to the prohibition in paragraph 1;

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any purchase, import or transfer of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly in relation to the prohibition in paragraph 1.

    ▼M25 —————

    ▼M17

    3a.  
    The prohibition in paragraph 1 shall not apply to purchases in Russia which are necessary for the functioning of diplomatic and consular representations of the Union and of the Member States, including delegations, embassies and missions, or for the personal use of nationals of Member States and their immediate family members.

    ▼M26

    3aa.  
    The competent authorities of a Member State may allow the import of goods which are intended for the strict personal use of natural persons travelling to the Union or of their immediate family members, limited to personal effects owned by those individuals and which are manifestly not intended for sale.
    3ab.  
    The competent authorities may authorise, under such conditions as they deem appropriate, the entry into the Union of a vehicle falling under CN code 8703 not intended for sale and owned by a citizen of a Member State or an immediate family member who is resident in Russia and is driving the vehicle into the Union for strict personal use.
    3ac.  
    The prohibition in paragraph 1 shall not apply to the entry into the Union of motor vehicles falling under CN code 8703 provided that they have a diplomatic vehicle registration plate and are necessary for the functioning of diplomatic and consular representations, including delegations, embassies and missions, or of international organisations enjoying immunities in accordance with international law, or for the personal use of their staff and their immediate family members.
    3ad.  
    The prohibition in paragraph 1 shall not prevent vehicles already in the territory of the Union on 19 December 2023 from being registered in a Member State.
    3ca.  
    With regard to the goods falling under CN codes 7205 , 7408 , 7604 , 7605 , 7607 and 7608 , the prohibitions in paragraphs 1 and 2 shall not apply to the execution until 20 March 2024 of contracts concluded before 19 December 2023, or of ancillary contracts necessary for the execution of such contracts.
    3cb.  
    With regard to the goods falling under CN codes 2711 12 , 2711 13 , 2711 14 , 2711 19 and 7202 , the prohibitions in paragraphs 1 and 2 shall not apply to the execution until 20 December 2024 of contracts concluded before 19 December 2023, or of ancillary contracts necessary for the execution of such contracts.
    3cc.  

    With regard to the goods falling under CN code 7201 , the prohibitions in paragraphs 1 and 2 shall not apply to the import, purchase or transport, or related technical or financial assistance of the following quantities of goods:

    (a) 

    1 140 000 metric tonnes between 19 December 2023 and 31 December 2024;

    (b) 

    700 000 metric tonnes between 1 January 2025 and 31 December 2025.

    3cd.  

    With regard to the goods falling under CN code 7203 , the prohibitions in paragraphs 1 and 2 shall not apply to the import, purchase or transport, or related technical or financial assistance, of the following quantities of goods:

    (a) 

    1 140 836 metric tonnes between 19 December 2023 and 31 December 2024;

    (b) 

    651 906 metric tonnes between 1 January 2025 and 31 December 2025.

    ▼M25 —————

    ▼M26

    3c.  
    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the purchase, import or transfer of the goods listed in Annex XXI, or the provision of related technical and financial assistance, under such conditions as they deem appropriate, after having determined that this is necessary for the establishment, operation, maintenance, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, such as the Paks II project, the supply of precursor material for the production of medical radioisotopes and similar medical applications, or critical technology for environmental radiation monitoring, as well as for civil nuclear cooperation, in particular in the field of research and development.

    ▼M25 —————

    ▼M24

    3da.  

    The prohibitions in paragraphs 1 and 2 shall not apply to the import, purchase or transport, or related technical or financial assistance, necessary for the import into the Union, until 30 June 2024, of the following quantities:

    (a) 

    752 475 metric tonnes for goods falling under CN code 2803 ;

    (b) 

    562 973 metric tonnes for goods falling under CN code 4002 .

    ▼M25

    3e.  
    By way of derogation from paragraphs 1 and 2 of this Article, the competent authorities may authorise the purchase, import or transfer of goods falling under CN codes 7007 , 8479 , 8481 , 8487 , 8504 , 8517 , 8525 , 8531 , 8536 , 8537 , 8538 , 8542 , 8543 , 8603 as listed in Annex XXI, or the provision of related technical and financial assistance, under such conditions as they deem appropriate, after having determined that this is necessary for the operation, maintenance or repair of Budapest metro line 3 cars delivered in 2018, in execution of a guarantee provided by Metrowagonmash prior to 24 June 2023.

    ▼M13

    4.  

    As of 10 July 2022, the prohibitions in paragraphs 1 and 2 shall not apply to the import, purchase or transport, or the related technical or financial assistance, necessary for the import into the Union, of:

    (a) 

    837 570 metric tonnes of potassium chloride of CN 3104 20 between 10 July of a given year and 9 July of the following year;

    (b) 

    1 577 807 metric tonnes combined of the other products listed in Annex XXI under CN 3105 20 , 3105 60 and 3105 90 between 10 July of a given year and 9 July of the following year.

    ▼M26

    5.  
    The import volume quotas set out in paragraphs 3cc, 3cd, 3da and 4 of this Article shall be managed by the Commission and the Member States in accordance with the management system for tariff-rate quotas provided for in Articles 49 to 54 of Commission Implementing Regulation (EU) 2015/2447.
    6.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 3c and 3e within two weeks of the authorisation.

    ▼M25 —————

    ▼M13

    Article 3k

    ▼M26

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, goods which could contribute in particular to the enhancement of Russian industrial capacities, whether or not originating in the Union, as listed in Annex XXIII, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M26

    1a.  
    The transit via the territory of Russia of the goods and technology as listed in Annex XXXVII, exported from the Union, shall be prohibited.

    ▼M13

    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia.

    ▼M25

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M26 —————

    ▼M25 —————

    ▼M26

    3aa.  
    With regard to the goods falling under the CN codes listed in Annex XXIIIA, the prohibitions in paragraphs 1 and 2 shall not apply to the execution until 20 March 2024 of contracts concluded before 19 December 2023, or of ancillary contracts necessary for the execution of such contracts.
    3ab.  
    With regard to the goods falling under the CN codes listed in Annex XXIIIB, the prohibitions in paragraphs 1 and 2 shall not apply to the execution until 20 June 2024 of contracts concluded before 19 December 2023, or of ancillary contracts necessary for the execution of such contracts.

    ▼M28

    3ac.  
    With regard to the goods falling under CN codes 8504 10 , 8504 21 , 8504 22 , 8504 23 , 8504 31 , 8504 40 , 8504 50 and 8504 90 , the prohibitions in paragraphs 1 and 2 shall not apply to the execution until 25 May 2024 of contracts concluded before 24 February 2024, or of ancillary contracts necessary for the execution of such contracts.

    ▼M13

    4.  
    The prohibitions referred to in paragraph 1 and 2 shall not apply to goods which are necessary for the official purposes of diplomatic or consular missions of Member States or partner countries in Russia or of international organisations enjoying immunities in accordance with international law, or to the personal effects of their staff.

    ▼M16

    5.  

    The competent authorities of the Member States may authorise, under the conditions they deem appropriate, the sale, supply, transfer or export of the goods and technology listed in Annex XXIII, or the provision of related technical or financial assistance, after having determined that such goods or technology or the provision of related technical or financial assistance are necessary for:

    (a) 

    medical or pharmaceutical purposes, or for humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations; or

    (b) 

    the exclusive use and under the full control of the authorising Member State and in order to fulfil its maintenance obligations in areas which are under a long-term lease agreement between that Member State and the Russian Federation; or

    ▼M26

    (c) 

    the establishment, operation, maintenance, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, such as the Paks II project, the supply of precursor material for the production of medical radioisotopes and similar medical applications, or critical technology for environmental radiation monitoring, as well as for civil nuclear cooperation, in particular in the field of research and development.

    ▼M24

    5a.  
    The competent authorities of the Member States may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export of the goods falling under CN code 8417 20 , or the provision of related technical or financial assistance, after having determined that such goods or the provision of related technical or financial assistance are necessary for personal household use of natural persons.

    ▼M25

    5b.  
    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export of the goods falling under CN chapters 72, 84, 85 and 90 as listed in Annex XXIII, or related technical assistance, brokering services, financing or financial assistance, after having determined that it is strictly necessary for the production of titanium goods required in the aeronautic industry, for which no alternative supply is available.

    ▼M26

    5c.  
    By way of derogation from paragraph 1a, the competent authorities may authorise the transit via the territory of Russia of goods and technology which could contribute in particular to the enhancement of Russian industrial capacities as listed in Annex XXXVII, after having determined that such goods or technology are intended for the purposes set out in paragraphs 5 and 5b of this Article.

    ▼M24

    6.  
    When deciding on requests for authorisations referred to in paragraphs 5, 5a and 5b, the competent authorities shall not grant an authorisation for exports to any natural or legal person, entity or body in Russia or for use in Russia, if they have reasonable grounds to believe that the goods might have a military end-use.

    ▼M26

    7.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 5, 5a, 5b and 5c within two weeks of the authorisation.

    ▼M13

    Article 3l

    1.  
    It shall be prohibited for any road transport undertaking established in Russia to transport goods by road within the territory of the Union, including in transit.

    ▼M25

    1a.  
    The prohibition in paragraph 1 shall apply to the transport of goods within the territory of the Union by road transport undertakings, carried out by means of trailers or semi-trailers registered in Russia, including if those trailers or semi-trailers are hauled by trucks registered in other countries.

    ▼M13

    2.  

    The prohibition in paragraph 1 shall not apply to road transport undertakings transporting:

    (a) 

    mail as a universal service;

    (b) 

    goods in transit though the Union between the Kaliningrad Oblast and Russia, provided that the transport of such goods is not otherwise prohibited under this Regulation.

    ▼M26 —————

    ▼M25

    4.  

    By way of derogation from paragraphs 1 and 1a, the competent authorities of a Member State may authorise the transport of goods by a road transport undertaking established in Russia or any road transport undertaking when the goods are carried out by means of trailers or semi-trailers registered in Russia, including if those trailers or semi-trailers are hauled by trucks registered in other countries, if the competent authorities have determined that such transport is necessary for:

    ▼M26

    (a) 

    unless otherwise prohibited, the purchase, import or transport into the Union of natural gas and oil, including refined petroleum products, as well as titanium, aluminium, copper, nickel, palladium and iron ore;

    ▼M13

    (b) 

    the purchase, import or transport of pharmaceutical, medical, agricultural and food products, including wheat and fertilisers whose import, purchase and transport is allowed under this Regulation;

    (c) 

    humanitarian purposes;

    ▼M15

    (d) 

    the functioning of diplomatic and consular representations in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law; or

    ▼M13

    (e) 

    the transfer or export to Russia of cultural goods which are on loan in the context of formal cultural cooperation with Russia.

    5.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 4 within two weeks of the authorisation.

    ▼M15

    Article 3m

    1.  
    It shall be prohibited to purchase, import or transfer, directly or indirectly, crude oil or petroleum products, as listed in Annex XXV, if they originate in Russia or are exported from Russia.
    2.  
    It shall be prohibited to provide, directly or indirectly, technical assistance, brokering services, financing or financial assistance or any other services related to the prohibition in paragraph 1.
    3.  

    The prohibitions in paragraphs 1 and 2 shall not apply:

    (a) 

    until 5 December 2022, to one-off transactions for near-term delivery, concluded and executed before that date, or to the execution of contracts for the purchase, import or transfer of goods falling under CN 2709 00 concluded before 4 June 2022, or of ancillary contracts necessary for the execution of such contracts, provided that those contracts have been notified by the relevant Member States to the Commission by 24 June 2022 and that the one-off transactions for near-term delivery are notified by the relevant Member States to the Commission within 10 days of their completion;

    (b) 

    until 5 February 2023, to one-off transactions for near-term delivery, concluded and executed before this date, or to the execution of contracts for the purchase, import or transfer of goods falling under CN 2710 concluded before 4 June 2022, or of ancillary contracts necessary for the execution of such contracts, provided that those contracts have been notified by the relevant Member States to the Commission by 24 June 2022 and that the one-off transactions for near-term delivery are notified by the relevant Member States to the Commission within 10 days of their completion;

    (c) 

    to the purchase, import or transfer of seaborne crude oil and of petroleum products listed in Annex XXV where those goods originate in a third country and are only being loaded in, departing from or transiting through Russia, provided that both the origin and the owner of those goods are non-Russian;

    (d) 

    to crude oil falling under CN 2709 00 which is delivered by pipeline from Russia into Member States, until the Council decides that the prohibitions in paragraphs 1 and 2 shall apply.

    ▼M25

    3a.  
    The exemption in paragraph 3, point (d), shall stop applying to Germany and Poland on 23 June 2023.

    ▼M15

    4.  
    If the supply of crude oil by pipeline from Russia to a landlocked Member State is interrupted for reasons outside the control of that Member State, seaborne crude oil from Russia falling under CN 2709 00 may be imported into that Member State, by way of an exceptional temporary derogation from paragraphs 1 and 2, until the supply is resumed or until the Council decision referred to in paragraph 3(d) applies with regard to that Member State, whichever is the earliest.
    5.  
    As of 5 December 2022, and by way of derogation from paragraphs 1 and 2, the competent authorities of Bulgaria may authorise the execution until 31 December 2024 of contracts concluded before 4 June 2022, or of ancillary contracts necessary for the execution of such contracts, for the purchase, import or transfer of seaborne crude oil and of petroleum products listed in Annex XXV originating in Russia or exported from Russia.

    ▼M26

    6.  

    As of 5 February 2023, and by way of derogation from paragraphs 1 and 2, the competent authorities of Croatia may authorise until 31 December 2024 the purchase, import or transfer of vacuum gas oil falling under CN code 2710 19 71 originating in Russia or exported from Russia, provided that the following conditions are fulfilled:

    ▼M15

    (a) 

    no alternative supply of vacuum gas oil is available; and

    (b) 

    Croatia has notified the Commission, at least two weeks prior to the authorisation, of the grounds on which it considers that a specific authorisation should be granted, and the Commission has not objected within that period.

    7.  
    The goods imported following a derogation granted by a competent authority under paragraph 5 or 6 shall not be sold on to buyers located in another Member State or in a third country.

    ▼M20

    As from 5 February 2023, it shall be prohibited to transfer or transport petroleum products falling under CN 2710 which are obtained from crude oil imported on the basis of a derogation granted by the Bulgarian competent authority under paragraph 5, to other Member States or to third countries, or to sell such petroleum products to purchasers in other Member States or in third countries.

    By way of derogation from the prohibition set out in the second subparagraph, the competent authorities of Bulgaria may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export to Ukraine of certain petroleum products as listed in Annex XXXI which are obtained from crude oil imported under paragraph 5, after having determined that:

    (a) 

    the products are intended for exclusive use in Ukraine;

    (b) 

    such sale, supply, transfer or export is not meant to circumvent the prohibitions in the second subparagraph.

    By way of derogation from the prohibition set out in the second subparagraph, the competent authorities of Bulgaria may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export to any third country of certain petroleum products as listed in Annex XXXII which are obtained from crude oil imported under paragraph 5, within the export volume quotas mentioned in that Annex, after having determined that:

    (a) 

    the products cannot be stored in Bulgaria due to environmental and safety risks;

    (b) 

    such sale, supply, transfer or export is not meant to circumvent the prohibitions in the second subparagraph.

    Bulgaria shall inform the other Member States and the Commission of any authorisations granted under this paragraph within two weeks of the authorisation.

    ▼M15

    8.  
    The transfer or transport of crude oil delivered by pipeline into Member States as referred to in paragraph 3(d) to other Member States or to third countries, or its sale to purchasers in other Member States or in third countries, shall be prohibited.

    All consignments and containers of such crude oil shall be clearly marked as 'REBCO: export prohibited'.

    As from 5 February 2023, where crude oil has been delivered by pipeline into a Member State as referred to in paragraph 3(d), it shall be prohibited to transfer or transport petroleum products falling under CN 2710 which are obtained from such crude oil to other Member States or to third countries, or to sell such petroleum products to purchasers in other Member States or in third countries.

    ▼M26

    By way of temporary derogation, the prohibitions referred to in the third subparagraph shall apply as from 5 December 2024 to the import and transfer into Czechia, and to the sale to purchasers in Czechia, of petroleum products obtained from crude oil which has been delivered by pipeline into another Member State as referred to in paragraph 3(d). If alternative supplies for such petroleum products are made available to Czechia before that date, the Council shall terminate that temporary derogation. During the period until 5 December 2024, the volumes of such petroleum products imported into Czechia from other Member States shall not exceed the average volumes imported into Czechia from those other Member States over the same period during the previous five years.

    ▼M20

    As of 5 February 2023, by way of derogation from the prohibitions referred to in the third subparagraph, the competent authorities of Hungary and Slovakia may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export to Ukraine of certain petroleum products as listed in Annex XXXI which are obtained from crude oil imported under paragraph 3(d), after having determined that:

    (a) 

    the products are intended for exclusive use in Ukraine;

    (b) 

    such sale, supply, transfer or export is not meant to circumvent the prohibitions in the third subparagraph.

    The Member State concerned shall inform the other Member States and the Commission of any authorisations granted under this paragraph within two weeks of the authorisation.

    ▼M15

    9.  
    The prohibitions in paragraph 1 shall not apply to purchases in Russia of goods listed in Annex XXV which are required in order to meet the essential needs of the purchaser in Russia or of humanitarian projects in Russia.
    10.  
    Member States shall report to the Commission by no later than 8 June 2022 and every three months thereafter on the amounts of crude oil falling under CN 2709 00 imported by pipeline, as referred to in paragraph 3(d). Such import figures shall be broken down per pipeline. In the event that the exceptional temporary derogation referred to in paragraph 4 applies with regard to a landlocked Member State, that Member State shall report to the Commission every three months on the amounts of seaborne crude oil falling under CN 2709 00 which it imports from Russia, for as long as that derogation applies.

    During the period until 5 December 2023 referred to in the fourth subparagraph of paragraph 8, Member States shall report to the Commission every three months on the amounts which they export to Czechia of petroleum products falling under CN 2710 obtained from crude oil which has been delivered by pipeline as referred to in paragraph 3(d).

    ▼M20

    11.  
    Natural and legal persons, entities and bodies shall inform within two weeks the competent authority of the Member State where they are resident, located, established or incorporated, of all transactions for the purchase, import or transfer into the Union of natural gas condensates of subheading CN 2709 00 10 from liquefied natural gas production plants, originating in or exported from Russia. The reporting shall include information on volumes.

    The Member State concerned shall provide the other Member States and the Commission with the information received under the previous subparagraph.

    12.  
    Based on the information received under paragraph 11, the Commission shall review the functioning of the measures concerning natural gas condensates of subheading CN 2709 00 10 from liquefied natural gas production plants, originating in or exported from Russia, no later than 18 June 2023.

    ▼M15

    Article 3n

    ▼M18

    1.  
    It shall be prohibited to provide, directly or indirectly, technical assistance, brokering services or financing or financial assistance, related to the trading, brokering or transport, including through ship-to-ship transfers, to third countries of crude oil or petroleum products as listed in Annex XXV which originate in Russia or which have been exported from Russia.

    ▼M17

    2.  

    The prohibition in paragraph 1 shall not apply to the execution of contracts concluded before 4 June 2022, or of ancillary contracts necessary for the execution of such contracts until:

    (a) 

    5 December 2022, for crude oil falling under CN code 2709 00 ;

    (b) 

    5 February 2023, for petroleum products falling under CN code 2710 .

    ▼M17

    3.  
    The prohibition in paragraph 1 does not apply to the payment of insurance claims after 5 December 2022, for crude oil falling under CN code 2709 00 , or after 5 February 2023, for petroleum products falling under CN code 2710 , on the basis of insurance contracts concluded before 4 June 2022 and provided that the insurance coverage has ceased by the relevant date.

    ▼M18

    4.  
    It shall be prohibited to trade, broker or transport, including through ship-to-ship transfers, to third countries, crude oil falling under CN code 2709 00 , as of 5 December 2022, or petroleum products falling under CN code 2710 , as of 5 February 2023, as listed in Annex XXV, which originate in Russia or which have been exported from Russia.
    5.  

    The prohibition in paragraph 4 of this Article shall apply as from the date of entry into force of the first Council Decision amending Annex XI to Decision 2014/512/CFSP in accordance with point (a) of Article 4p(9) of that Decision.

    As from the date of entry into force of every subsequent Council Decision amending Annex XI to Decision 2014/512/CFSP, the prohibitions in paragraphs 1 and 4 of this Article shall not apply, for a period of 90 days, to the transport of products listed in Annex XXV to this Regulation which originate in Russia or which have been exported from Russia, and to the provision, directly or indirectly, of technical assistance, brokering services or financing or financial assistance, related to the transport, provided that:

    (a) 

    the transport or the provision of technical assistance, brokering services or financing or financial assistance, related to the transport is based on a contract concluded before the date of entry into force of every subsequent Council Decision amending Annex XI to Decision 2014/512/CFSP; and

    (b) 

    the purchase price per barrel did not exceed the price laid down in Annex XXVIII to this Regulation on the date of conclusion of that contract.

    6.  

    The prohibitions in paragraphs 1 and 4 shall not apply:

    (a) 

    as of 5 December 2022, to crude oil falling under CN code 2709 00 , and as of 5 February 2023, to petroleum products falling under CN code 2710 , which originate in Russia or which have been exported from Russia provided that the purchase price per barrel of such products does not exceed the price laid down in Annex XXVIII;

    (b) 

    to crude oil or petroleum products as listed in Annex XXV where those goods originate in a third country and are only being loaded in, departing from or transiting through Russia, provided that both the origin and the owner of those goods are non-Russian;

    (c) 

    to the transport, or to technical assistance, brokering services, financing or financial assistance related to such transport, of the products mentioned in Annex XXIX to the third countries mentioned therein, for the duration specified in that Annex;

    (d) 

    as of 5 December 2022, to crude oil falling under CN code 2709 00 , which originates in Russia or which has been exported from Russia purchased above the price laid down in Annex XXVIII which is loaded onto a vessel at the port of loading prior to 5 December 2022 and unloaded at the final port of destination prior to 19 January 2023;

    ▼M22

    (e) 

    as of 5 February 2023, to petroleum products falling under CN code 2710 , which originate in Russia or which have been exported from Russia purchased above the respective price laid down in Annex XXVIII which are loaded onto a vessel at the port of loading prior to 5 February 2023 and unloaded at the final port of destination prior to 1 April 2023.

    ▼M26

    6a.  
    In application of paragraphs 4 and 6, point (a), for Russian crude oil or petroleum products listed in Annex XXV, loaded as of 20 February 2024, service providers with no access to the purchase price per barrel laid down in Annex XXVIII of such products shall collect itemised price information for ancillary costs as provided by operators further up the supply chain of Russian crude oil or petroleum product trade. Such itemised price information shall be provided to counterparties and competent authorities, upon their request, for the purpose of verifying compliance with this Article.

    ▼M18

    7.  
    In the event that, after the entry into force of a Council Decision amending Annex XI to Decision 2014/512/CFSP, a vessel has transported the Russian crude oil or petroleum products referred to in paragraph 4, and the operator responsible for the transport knew or had reasonable cause to suspect that such crude oil or petroleum products were purchased above the price laid down in Annex XXVIII to this Regulation on the date of conclusion of the contract for such purchase, it shall be prohibited to provide the services referred to in paragraph 1 of this Article relating to the transport of crude oil or petroleum products that originate in Russia or are exported from Russia as referred to in paragraph 4 of this Article by that vessel for 90 days following the date of unloading of the cargo purchased above the price cap.

    ▼M26 —————

    ▼M18

    9.  
    The prohibitions in paragraph 1 and 4 shall not apply to the transport or provision of technical assistance, brokering services or financing or financial assistance, related to the transport necessary for the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment, or as a response to natural disasters, provided that the national competent authority has been notified immediately once the event has been identified.
    10.  
    Member States and the Commission shall inform each other of detected instances of a breach or circumvention of the prohibitions set out in this Article.

    Any information provided or received in accordance with this Article shall be used for the purposes for which it was provided or received, including ensuring the effectiveness of the measure.

    ▼M22

    11.  
    The functioning of the price cap mechanism, including Annex XXVIII as well as the prohibitions in paragraphs 1 and 4 of this Article, shall be reviewed by mid-March 2023 and every 2 months thereafter.

    The review shall take into account the effectiveness of the measure in terms of its expected results, its implementation, international adherence to and informal alignment with the price cap mechanism, and its potential impact on the Union and its Member States. It shall respond to developments in the market, including possible turbulences.

    In order to achieve the objectives of the price cap, including its ability to reduce Russia’s oil revenues, the price cap shall be at least 5 % below the average market price for Russian oil and petroleum products, calculated on the basis of data provided by the International Energy Agency.

    ▼M20

    12.  
    Natural and legal persons, entities and bodies shall inform within two weeks the competent authority of the Member State where they are resident, located, established or incorporated, of all transactions for the purchase or transfer into third countries of natural gas condensates of subheading CN 2709 00 10 from liquefied natural gas production plants, originating in or exported from Russia. The reporting shall include information on volumes.

    The Member State concerned shall provide the other Member States and the Commission with the information received under the previous subparagraph.

    13.  
    Based on the information received under paragraph 12, the Commission shall review the functioning of the measures concerning natural gas condensates of subheading CN 2709 00 10 from liquefied natural gas production plants, originating in or exported from Russia, no later than 18 June 2023.

    ▼M26

    Article 3na

    To facilitate the implementation and enforcement of Articles 3m and 3n, the Commission and Member States shall periodically share information with each other with a view to further identify vessels and entities of concern carrying out one or more deceptive practices while transporting Russian crude oil and petroleum products.

    Information received in accordance with this Article shall be used only for the purpose for which it was requested.

    ▼M16

    Article 3o

    1.  
    It shall be prohibited to purchase, import, or transfer, directly or indirectly, gold, as listed in Annex XXVI if it originates in Russia and it has been exported from Russia into the Union or to any third country after 22 July 2022.
    2.  
    It shall be prohibited to purchase, import, or transfer, directly or indirectly the products listed in Annex XXVI when processed in a third country incorporating the products prohibited in paragraph 1.
    3.  
    It shall be prohibited to purchase, import, or transfer, directly or indirectly, gold, as listed in Annex XXVII if it originates in Russia and it has been exported from Russia into the Union after 22 July 2022.
    4.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods referred to in paragraphs 1, 2 and 3 and to the provision, manufacture, maintenance and use of those goods, directly or indirectly in relation to the prohibition in paragraphs 1, 2 and 3;

    (b) 

    provide financing or financial assistance related to the goods referred to in paragraphs 1, 2 and 3 for any purchase, import or transfer of those goods, or for the provision of related technical assistance, brokering services or other services, directly or indirectly in relation to the prohibition in paragraphs 1, 2 and 3.

    5.  
    The prohibitions in paragraphs 1, 2 and 3 shall not apply to gold which is necessary for the official purposes of diplomatic missions, consular posts or international organisations in Russia enjoying immunities in accordance with international law.
    6.  
    The prohibition in paragraph 3 shall not apply to goods as listed in Annex XXVII for personal use of natural persons travelling to the European Union or members of their immediate families travelling with them, owned by those individuals and not intended for sale.
    7.  
    By way of derogation from paragraphs 1, 2 and 3, the competent authorities may authorise the transfer or import of cultural goods which are on loan in the context of formal cultural cooperation with Russia.

    ▼M26

    Article 3p

    1.  
    It shall be prohibited, as of 1 January 2024, to purchase, import, or transfer, directly or indirectly, diamonds and products incorporating diamonds, as listed in Parts A, B and C of Annex XXXVIIIA, if they originate in Russia or have been exported from Russia into the Union or to any third country.
    2.  
    It shall be prohibited, as of 1 January 2024, to purchase, import, or transfer, directly or indirectly, diamonds and products incorporating diamonds, as listed in Parts A, B and C of Annex XXXVIIIA, of any origin, if they transited via the territory of Russia.
    3.  
    It shall be prohibited, as of 1 March 2024, to purchase, import, or transfer, directly or indirectly, products listed in Part A of Annex XXXVIIIA, when processed in a third country, consisting of diamonds originating in Russia or exported from Russia with a weight equal to or above 1.0 carats per diamond.
    4.  
    It shall be prohibited, as of 1 September 2024, to purchase, import, or transfer, directly or indirectly, products listed in Parts A, B and C of Annex XXXVIIIA, when processed in a third country, consisting of or incorporating diamonds originating in Russia or exported from Russia with a weight equal to or above 0.5 carats or 0.1 grams per diamond.
    5.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods referred to in paragraphs 1 to 4, and to the provision, manufacture, maintenance and use of those goods, directly or indirectly in relation to the prohibitions in paragraphs 1 to 4;

    (b) 

    provide financing or financial assistance related to the goods referred to in paragraphs 1 to 4 for any purchase, import or transfer of those goods, or for the provision of related technical assistance, brokering services or other services, directly or indirectly in relation to the prohibitions in paragraphs 1 to 4.

    6.  
    The prohibitions in paragraphs 1 to 4 shall not apply to goods listed in Part C of Annex XXXVIIIA for the personal use of natural persons travelling to the Union or of their immediate family members travelling with them, owned by those individuals and not intended for sale.
    7.  
    By way of derogation from paragraphs 1 to 4, the competent authorities may authorise the transfer or import of cultural goods which are on loan in the context of formal cultural cooperation with Russia.
    8.  
    For the purposes of paragraphs 3 and 4, goods falling under CN codes 7102 31 00 and 7102 10 00 that are imported into the Union shall be submitted for verification without delay, together with documentation certifying their origin, to the authority specified in Annex XXXVIIIB. The Member State where those goods are brought into the customs territory of the Union shall ensure their submission to the authority specified in Annex XXXVIIIB. Customs transit may be granted to that effect. If such customs transit is granted, the verification provided for in this paragraph shall be suspended until the arrival of those goods at the authority specified in Annex XXXVIIIB. The importer shall be responsible for the proper movement of those goods and the costs of such movement.
    9.  
    All verifications required under paragraph 8 shall be carried out in accordance with the rules and procedures laid down in Council Regulation (EC) No 2368/2002 ( 14 ), which shall apply mutatis mutandis.
    10.  
    For the purposes of paragraphs 3 and 4, at the moment of importation, importers shall provide evidence of the country of origin of the diamonds or products incorporating diamonds used as inputs for the processing of the product in a third country.

    As of 1 September 2024, the traceability-based evidence shall include a corresponding certificate certifying that the diamonds are not mined, processed or produced in Russia.

    Article 3q

    1.  
    It shall be prohibited for any national of a Member State, natural person residing in a Member State, and legal person, entity or body which is established in the Union to sell, or otherwise transfer ownership, directly or indirectly, of tankers for the transport of crude oil or petroleum products listed in Annex XXV, falling under HS code ex 8901 20 , whether or not originating in the Union, to any natural or legal person, entity or body in Russia or for use in Russia.
    2.  
    By way of derogation from paragraph 1, the competent authorities may authorise, under the conditions they deem appropriate, the sale or other transfer of ownership of tankers for the transport of crude oil or petroleum products listed in Annex XXV, falling under HS code ex 8901 20 .
    3.  
    When deciding on requests for the authorisation referred to in paragraph 2 of this Article, the competent authorities shall not grant an authorisation for a sale or other transfer of ownership to any natural or legal person, entity or body in Russia or for use in Russia, if they have reasonable grounds to believe that the tanker would be used to transport, or be re-exported to transport, crude oil or petroleum products listed in Annex XXV, originating in Russia or exported from Russia for import into the Union in breach of Article 3m or for transport to third countries at a purchase price per barrel exceeding the price laid down in Annex XXVIII.
    4.  
    Any sale or other arrangement entailing a transfer of ownership by a national of a Member State, a natural person residing in a Member State, and a legal person, entity or body which is established in the Union to any third country of tankers for the transport of crude oil or petroleum products listed in Annex XXV, falling under HS code ex 8901 20 , with the exception of a sale or other transfer of ownership prohibited under paragraph 1, shall be notified immediately to the competent authorities of the Member State where the owner of the tanker is a citizen, a resident or is established.

    The notification to the competent authority shall contain at least, the following information: the identities of the seller and the purchaser, and where applicable the incorporation documents of the seller and the purchaser including the shareholding and management; the IMO ship identification number of the tanker; and the Call Sign of the tanker.

    5.  
    Any sale or other transfer of ownership of tankers as referred to in paragraphs 1 and 4 after 5 December 2022 and prior to 19 December 2023 shall be notified to the competent authorities before 20 February 2024.
    6.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 2, and of any notification under paragraphs 4 and 5, within two weeks of the authorisation or notification.

    ▼B

    Article 4

    1.  

    It shall be prohibited:

    ▼M25

    (a) 

    to provide, directly or indirectly, technical assistance and brokering services related to the goods and technology listed in the Common Military List ( 15 ), or related to the provision, manufacture, maintenance and use of goods included in that list, to any natural or legal person, entity or body in Russia or for use in Russia;

    ▼M1

    (b) 

    to provide, directly or indirectly, financing or financial assistance related to the goods and technology listed in the Common Military List, including in particular grants, loans and export credit insurance or guarantee, as well as insurance and reinsurance for any sale, supply, transfer or export of such items, or for any provision of related technical assistance, to any natural or legal person, entity or body in Russia or for use in Russia.

    ▼M13 —————

    ▼M13

    2.  

    The prohibitions in paragraph 1 shall be without prejudice to the assistance for:

    (a) 

    the import, purchase or transport related to: (i) the provision of spare parts and services necessary for the maintenance and safety of existing capabilities within the Union; or (ii) the execution of contracts concluded before 1 August 2014, or ancillary contracts necessary for the execution of such contracts; or

    (b) 

    the sale, supply, transfer or export of spare parts and services necessary for the maintenance, repair and safety of existing capabilities within the Union.

    ▼M3

    2a.  

    The prohibitions in points (a) and (b) of paragraph 1 shall not apply to the provision, directly or indirectly, of technical assistance, financing or financial assistance, related to the following operations:

    (a) 

    the sale, supply, transfer or export and to the import, purchase or transport of Hydrazine (CAS 302-01-2) in concentrations of 70 per cent or more, provided that that technical assistance, financing or financial assistance refers to an amount of Hydrazine calculated in accordance with the launch or launches or the satellites for which it is made, and which does not exceed a total quantity of 800 kg for each individual launch or satellite;

    (b) 

    the import, purchase or transport of Unsymmetrical dimethyl hydrazine (CAS 57-14-7);

    (c) 

    the sale, supply, transfer or export and to the import, purchase or transport of monomethyl hydrazine (CAS60-34-4), provided that that technical assistance, financing or financial assistance refers to an amount of Monomethyl Hydrazine calculated in accordance with the launch or launches or the satellites for which it is made,

    insofar as the substances mentioned in points (a), (b) and (c) of this paragraph are destined for the use of launchers operated by European launch service providers, for the use of launches of European space programmes, or for the fuelling of satellites by European satellites manufacturers.

    ▼M4

    2aa.  

    The prohibitions in points (a) and (b) of paragraph 1 shall not apply to the provision, directly or indirectly, of technical assistance, financing or financial assistance related to the sale, supply, transfer or export and the import, purchase or transport of hydrazine (CAS 302-01-2) in concentrations of 70 % or more, provided that that technical assistance, financing or financial assistance refers to hydrazine destined for:

    (a) 

    the tests and flight of the ExoMars descent module in the framework of the ExoMars 2020 mission, in an amount calculated in accordance with the needs of each phase of that mission, which does not exceed a total of 5 000  kg for the entire duration of the mission; or

    (b) 

    the flight of the ExoMars carrier module in the framework of the ExoMars 2020 mission, in an amount calculated in accordance with the needs of the flight, which does not exceed a total of 300 kg.

    ▼M4

    2b.  
    The provision, directly or indirectly, of technical assistance, financing or financial assistance, related to the operations referred to in paragraphs 2a and 2aa shall be subject to prior authorisation by the competent authorities.

    Applicants for authorisation shall supply the competent authorities with all relevant information required.

    The competent authorities shall inform the Commission of all the authorisations granted.

    ▼M2

    3.  

    The provision of the following shall be subject to an authorisation from the competent authority concerned:

    (a) 

    technical assistance or brokering services related to items listed in Annex II and to the provision, manufacture, maintenance and use of those items, directly or indirectly, to any natural or legal person, entity or body in Russia, including its Exclusive Economic Zone and Continental Shelf or, if such assistance concerns items for use in Russia, including its Exclusive Economic Zone and Continental Shelf, to any person, entity or body in any other State;

    (b) 

    financing or financial assistance related to items referred to in Annex II, including in particular grants, loans and export credit insurance, for any sale, supply, transfer or export of those items, or for any provision of related technical assistance, directly or indirectly, to any natural or legal person, entity or body in Russia, including its Exclusive Economic Zone and Continental Shelf or, if such assistance concerns items for use in Russia, including its Exclusive Economic Zone and Continental Shelf, to any person, entity or body in any other State.

    In duly justified cases of emergency referred to in Article 3(5), the provision of services referred to in this paragraph may proceed without prior authorisation, on condition that the provider notifies the competent authority within five working days after the provision of services.

    ▼C1

    4.  
    Where authorisations are requested pursuant to paragraph 3 of this Article, Article 3, and in particular paragraphs 2 and 5 thereof, shall apply mutatis mutandis.

    ▼M7

    Article 5

    1.  

    It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments with a maturity exceeding 90 days, issued after 1 August 2014 to 12 September 2014, or with a maturity exceeding 30 days, issued after 12 September 2014 to 12 April 2022 or any transferable securities and money market instruments issued after 12 April 2022 by:

    (a) 

    a major credit institution, or other major institution having an explicit mandate to promote competitiveness of the Russian economy, its diversification and encouragement of investment, established in Russia with over 50 % public ownership or control as of 1 August 2014, as listed in Annex III; or

    (b) 

    a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex III; or

    (c) 

    a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (b) of this paragraph or listed in Annex III.

    2.  

    It shall be prohibited to directly or indirectly, purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments issued after 12 April 2022 by:

    (a) 

    any major credit institution, or other institution with over 50 % public ownership or control as of 26 February 2022 or any other credit institution having a significant role in supporting the activities of Russia, its government or the Central Bank and established in Russia, as listed in Annex XII; or

    (b) 

    a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex XII; or

    (c) 

    a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph.

    3.  

    It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments with a maturity exceeding 30 days, issued after 12 September 2014 to 12 April 2022 or any transferable securities and money market instruments issued after 12 April 2022 by:

    (a) 

    a legal person, entity or body established in Russia predominantly engaged, and with major activities, in the conception, production, sales or export of military equipment or services, as listed in Annex V, except legal persons, entities or bodies active in the space or the nuclear energy sectors;

    (b) 

    a legal person, entity or body established in Russia, which is publicly controlled or with over 50 % public ownership and having estimated total assets of over RUB 1 trillion and whose estimated revenues originate for at least 50 % from the sale or transportation of crude oil or petroleum products, as listed in Annex VI;

    (c) 

    a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in point (a) or (b) of this paragraph; or

    (d) 

    a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a), (b) or (c) of this paragraph.

    4.  

    It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments, issued after 12 April 2022 by:

    (a) 

    a legal person, entity or body established in Russia, which is publicly controlled or with over 50 % public ownership and in which Russia, its Government or Central Bank has the right to participate in profits or with which Russia, its Government or Central Bank has other substantial economic relationships, as listed in Annex XIII; or

    (b) 

    a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed Annex XIII; or

    (c) 

    a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph.

    ▼M20

    5.  
    It shall be prohibited to list and provide services for, as of 12 April 2022, and to admit to trading as of 29 January 2023, on trading venues registered or recognised in the Union, the transferable securities of any legal person, entity or body established in Russia and with over 50 % public ownership.

    ▼M26

    6.  

    It shall be prohibited to directly or indirectly make or be part of any arrangement to make:

    (i) 

    new loans or credit with a maturity exceeding 30 days to any legal person, entity or body referred to in paragraph 1 or 3, after 12 September 2014 to 26 February 2022; or

    (ii) 

    any new loans or credit to any legal person, entity or body referred to in paragraph 1, 2, 3 or 4 after 26 February 2022.

    The prohibition shall not apply to:

    (a) 

    loans or credit that have a specific and documented objective to provide financing for non-prohibited imports or exports of goods and non-financial services between the Union and any third State, including the expenditure for goods and services from another third State that is necessary for executing the export or import contracts, provided that the national competent authority has been notified within three months of the date of the loan or credit; or

    (b) 

    loans that have a specific and documented objective to provide emergency funding to meet solvency and liquidity criteria for legal persons established in the Union, whose proprietary rights are owned for more than 50 % by any entity referred to in Annex III, provided that the national competent authority has been notified within three months of the date of the loan or credit.

    7.  

    The prohibition in paragraph 6 shall not apply to drawdown or disbursements made under a contract concluded before 26 February 2022, provided that the following conditions are met:

    (a) 

    all the terms and conditions of such drawdown or disbursements:

    (i) 

    were agreed before 26 February 2022; and

    (ii) 

    have not been modified on or after that date;

    (b) 

    before 26 February 2022, a contractual maturity date has been fixed for the repayment in full of all funds made available and for the cancellation of all the commitments, rights and obligations under the contract;

    (c) 

    at the time of its conclusion the contract was not in breach of the prohibitions in this Regulation in force at that time; and

    (d) 

    the national competent authority has been notified within three months of the date of the drawdown or disbursements.

    The terms and conditions of drawdowns and disbursements referred to in point (a) include provisions concerning the length of the repayment period for each drawdown or disbursement, the interest rate applied or the interest rate calculation method, and the maximum amount.

    ▼M6

    Article 5a

    1.  

    It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments issued after 9 March 2022 by:

    (a) 

    Russia and its government; or

    (b) 

    the Central Bank of Russia; or

    (c) 

    a legal person, entity or body acting on behalf or at the direction of the entity referred to in point (b).

    ▼M26

    2.  
    It shall be prohibited to directly or indirectly make or be part of any arrangement to make any new loans or credit to any legal person, entity or body referred to in paragraph 1 after 23 February 2022.

    The prohibition shall not apply to loans or credit that have a specific and documented objective to provide financing for non-prohibited imports or exports of goods and non-financial services between the Union and any third State, including the expenditure for goods and services from another third State that is necessary for executing the export or import contracts, provided that the national competent authority has been notified within three months of the date of the loan or credit.

    3.  

    The prohibition in paragraph 2 shall not apply to drawdown or disbursements made under a contract concluded before 23 February 2022 provided that the following conditions are met:

    (a) 

    all the terms and conditions of such drawdown or disbursements:

    (i) 

    were agreed before 23 February 2022; and

    (ii) 

    have not been modified on or after that date;

    (b) 

    before 23 February 2022 a contractual maturity date has been fixed for the repayment in full of all funds made available and for the cancellation of all the commitments, rights and obligations under the contract; and

    (c) 

    the national competent authority has been notified within three months of the date of the drawdown or disbursements.

    The terms and conditions of drawdowns and disbursements referred to in point (a) include provisions concerning the length of the repayment period for each drawdown or disbursement, the interest rate applied or the interest rate calculation method, and the maximum amount.

    ▼M11

    4.  
    Transactions related to the management of reserves as well as of assets of the Central Bank of Russia, including transactions with any legal person, entity or body acting on behalf of, or at the direction of, the Central Bank of Russia, such as the Russian National Wealth Fund, are prohibited.

    ▼M24

    4a.  

    Notwithstanding the applicable rules concerning reporting, confidentiality and professional secrecy, natural and legal persons, entities and bodies, including the European Central Bank, national central banks, financial sector entities as defined in Article 4 of Regulation (EU) No 575/2013 of the European Parliament and of the Council ( 16 ), insurance and reinsurance undertakings as defined in Article 13 of Directive 2009/138/EC of the European Parliament and of the Council ( 17 ), central securities depositories as defined in Article 2 of Regulation (EU) No 909/2014 and central counterparties as defined in Article 2 of Regulation (EU) No 648/2012 of the European Parliament and of the Council ( 18 ) shall provide, no later than two weeks after 26 February 2023, to the competent authority of the Member State where they are resident or located, and simultaneously to the Commission, information on the assets and reserves referred to in paragraph 4 of this Article which they hold or control or are a counterparty to. Such information shall be updated every three months and shall at least cover the following:

    (a) 

    information identifying the natural or legal persons, entities or bodies owning, holding or controlling such assets and reserves, including the name, address and VAT registration or tax identification number;

    (b) 

    the amount or market value of such assets and reserves at the date of reporting and at the date of immobilisation;

    (c) 

    types of the assets and reserves, broken down according to the categories set out in points (i) to (vii) of Article 1(g) of Council Regulation (EU) 269/2014 ( 19 ) as well as crypto-assets and other relevant categories, and an additional category corresponding to economic resources within the meaning of Article 1(d) of Regulation (EU) 269/2014. For each of those categories and where available, relevant features, such as quantity, location, currency, maturity and contractual conditions between the reporting entity and the asset owner shall be indicated.

    4b.  
    Where the reporting natural or legal person, entity or body has established an extraordinary and unforeseen loss or damage to the assets and reserves referred to in paragraph 4a, this information shall be reported immediately to the competent authority of the relevant Member State and transmitted simultaneously to the Commission.
    4c.  
    Member States, as well as the natural and legal persons, entities and bodies covered by the reporting obligation set out in paragraph 4a, shall cooperate with the Commission in any verification of the information received pursuant to that paragraph. The Commission may request any additional information it requires to carry out such verification. When such a request is addressed to a natural or legal person, entity or body, the Commission shall simultaneously transmit it to the competent authority of the relevant Member State. Any additional information received directly by the Commission shall be made available to the competent authority of the relevant Member State.
    4d.  
    Any information provided to or received by the Commission and the competent authorities of the Member States in accordance with this Article shall be used by the Commission and the competent authorities of the Member States only for the purposes for which it was provided or received.
    4e.  

    Any processing of personal data shall be carried out in accordance with this Regulation and Regulations (EU) 2016/679 ( 20 ) and (EU) 2018/1725 ( 21 ) of the European Parliament and of the Council and only in so far as necessary for the application of this Regulation and to ensure effective cooperation between Member States as well as with the Commission in the application of this Regulation.

    ▼M8

    5.  
    By way of derogation from paragraph 4, the competent authorities may authorise a transaction provided that it is strictly necessary to ensure the financial stability of the Union as a whole or of the Member State concerned.
    6.  
    The Member State concerned shall immediately inform the other Member States and the Commission of its intention to grant an authorisation under paragraph 5.

    ▼M27

    7.  
    Paragraph 4 shall not apply to any balance sheet management transactions linked to assets and reserves of the Central Bank of Russia, or linked to assets and reserves of any legal person, entity or body acting on behalf of, or at the direction of, the Central Bank of Russia, such as the Russian National Wealth Fund, carried out on or after 28 February 2022.
    8.  

    As of 15 February 2024, and as long as the restrictive measures set out in paragraph 4 are maintained, central securities depositories within the meaning of Regulation (EU) No 909/2014 holding assets and reserves referred to in paragraph 4 of this Article with a total value exceeding EUR 1 million shall apply the following rules regarding cash balances accumulating exclusively due to the restrictive measures:

    (a) 

    those cash balances shall be accounted for separately;

    (b) 

    revenues accruing from or generated by the cash balances referred to in point (a) from 15 February 2024 shall be registered separately in the financial accounts of central securities depositories;

    (c) 

    net profits determined in respect of revenues referred to in point (b) in accordance with national law, including by deducting all relevant expenses linked to or resulting from the management of the immobilised assets and the risk-management associated with the immobilised assets and after deduction of corporate tax under the general regime of the Member State concerned, may not be disposed of by way of distribution in the form of dividends or in whatever form to the benefit of shareholders or any third party until the Council decides pursuant to a proposal submitted on the basis of Article 215 of the Treaty on the Functioning of the European Union, on a possible establishment of a financial contribution to the Union budget that shall be raised on those net profits to support Ukraine and its recovery and reconstruction, as well as detailed arrangements therefor, consistent with applicable contractual obligations, and in accordance with Union and international law. In that context, the Council shall also decide the amount that central securities depositories may provisionally retain in addition to complying with statutory capital and risk-management requirements, without prejudice to the respect by the relevant central securities depositories of the rules provided for in or pursuant to the Union legal acts governing their supervision;

    (d) 

    until the Council decision referred to in point (c) is adopted, each central security depository may request its supervisory authority to authorise releases of a part of the net profits referred to in point (c), in view of complying with statutory capital and risk-management requirements. The Member States concerned shall notify the Commission in advance of any authorisation.

    9.  
    Central securities depositories concerned shall report to the Commission and to their national supervisory authorities, by 30 June of each year, on the total amount of cash balances, revenues and net profits referred to in points (a) to (c) of paragraph 8 respectively.
    10.  
    The Commission shall be empowered to adopt regulations, by means of implementing acts, setting out specific modalities for reporting, in respect of revenues and profits referred to in paragraph 8.

    The Commission shall consult the national competent authorities to that effect.

    ▼M12

    Article 5aa

    1.  

    It shall be prohibited to directly or indirectly engage in any transaction with:

    (a) 

    a legal person, entity or body established in Russia, which is publically controlled or with over 50 % public ownership or in which Russia, its Government or Central Bank has the right to participate in profits or with which Russia, its Government or Central Bank has other substantial economic relationship, as listed in Annex XIX;

    (b) 

    a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex XIX; or

    (c) 

    a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph.

    ▼M17

    1a.  
    It shall be prohibited as from 22 October 2022 to hold any posts in the governing bodies of any legal person, entity or body referred to in paragraph 1.

    ▼M20

    1b.  

    It shall be prohibited as from 16 January 2023 to hold any posts in the governing bodies of:

    (a) 

    a legal person, entity or body established in Russia, which is publicly controlled or with over 50 % public ownership, or in which Russia, its Government or Central Bank has the right to participate in profits or with which Russia, its Government or Central Bank has other substantial economic relationship;

    (b) 

    a legal person, entity or body established in Russia whose proprietary rights are directly or indirectly owned for more than 50 % by an entity referred to in point (a) of this paragraph; or

    (c) 

    a legal person, entity or body established in Russia and acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph.

    This prohibition shall not apply to any legal person, entity or body referred to in paragraph 1, for which paragraph 1a applies.

    1c.  

    By way of derogation from paragraph 1b, the competent authorities may authorise the holding of a post in the governing body of a legal person, entity or body referred to in paragraph 1b, after having determined that the legal person, entity or body is:

    (a) 

    a joint venture or similar legal arrangement involving a legal person, entity or body referred to in paragraph 1b and concluded by a legal person, entity or body which is incorporated or constituted under the law of a Member State before 17 December 2022; or

    (b) 

    a legal person, entity or body referred to in paragraph 1b which was established in Russia before 17 December 2022 and which is owned by, or solely or jointly controlled by, a legal person, entity or body which is incorporated or constituted under the law of a Member State.

    1d.  
    By way of derogation from paragraph 1b, the competent authorities may authorise the holding of a post in the governing body of a legal person, entity or body referred to in paragraph 1b, after having determined that the holding of such a post is necessary for ensuring critical energy supply.
    1e.  
    By way of derogation from paragraph 1b, the competent authorities may authorise the holding of a post in the governing body of a legal person, entity or body referred to in paragraph 1b, after having determined that the legal person, entity or body is involved in the transit through Russia of oil originating in a third country and that the holding of such a post is intended for operations which are not prohibited under Articles 3m and 3n.

    ▼M26 —————

    ▼M17

    2a.  
    The prohibition in paragraph 1 shall not apply to the reception of payments due by the legal persons, entities or bodies referred to in Part A of Annex XIX pursuant to contracts performed before 15 May 2022.

    ▼M26 —————

    ▼M17

    2c.  
    The prohibition in paragraph 1 shall not apply to the reception of payments due by the legal persons, entities or bodies referred to in Part B of Annex XIX pursuant to contracts performed before 8 January 2023.

    ▼M26 —————

    ▼M20

    2e.  
    The prohibition in paragraph 1 shall not apply to the reception of payments due by the legal persons, entities or bodies referred to in Part C of Annex XIX pursuant to contracts performed before 18 March 2023.

    ▼M12

    3.  

    ►M26  Unless otherwise prohibited, the prohibition in paragraph 1 shall not apply to: ◄

    ▼M16

    (a) 

    transactions which are strictly necessary for the direct or indirect purchase, import or transport of natural gas, titanium, aluminium, copper, nickel, palladium and iron ore from or through Russia into the Union, a country member of the European Economic Area, Switzerland, or the Western Balkans;

    ▼M16

    (aa) 

    unless prohibited under Article 3m or 3n, transactions which are strictly necessary for the direct or indirect purchase, import or transport of oil, including refined petroleum products, from or through Russia;

    ▼M12

    (b) 

    transactions related to energy projects outside Russia in which a legal person, entity or body listed in Annex XIX is a minority shareholder;

    ▼M25 —————

    ▼M26

    (d) 

    transactions, including sales, which are strictly necessary for the wind-down, by 31 December 2024, of a joint venture or similar legal arrangement concluded before 16 March 2022, involving a legal person, entity or body referred to in paragraph 1;

    ▼M15

    (e) 

    transactions related to the provision of electronic communication services, data center services, and the provision of services and equipment necessary for their operation, maintenance, security, including the provision of firewalls, and call center services, to a legal person, entity or body listed in Annex XIX;

    ▼M16

    (f) 

    transactions which are necessary for the purchase, import or transport of pharmaceutical, medical, agricultural and food products, including wheat and fertilisers whose import, purchase and transport is allowed under this Regulation;

    (g) 

    transactions which are strictly necessary to ensure access to judicial, administrative or arbitral proceedings in a Member State, as well as for the recognition or enforcement of a judgment or an arbitration award rendered in a Member State and if such transactions are consistent with the objectives of this Regulation and Regulation (EU) No 269/2014;

    ▼M26 —————

    ▼M26

    3a.  
    By way of derogation from paragraph 1, the competent authorities may authorise, under such conditions as they deem appropriate, transactions which are strictly necessary for the divestment and withdrawal by 31 December 2024, by the entities referred to in paragraph 1 or their subsidiaries in the Union from a legal person, entity or body established in the Union.

    ▼M17

    4.  

    By way of derogation from the procedure laid down in Article 7(3) of Regulation (EC) No 391/2009 of the European Parliament and of the Council ( 22 ) and in Article 21(3) of Directive (EU) 2016/1629 of the European Parliament and of the Council ( 23 ), the Union's recognition of the Russian Maritime Register of Shipping under Regulation (EC) No 391/2009 and Directive (EU) 2016/1629 is withdrawn.

    ▼M20

    5.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 1c, 1d, 1e and 3a within two weeks of the authorisation.

    ▼M13

    Article 5b

    ▼M16

    1.  
    It shall be prohibited to accept any deposits from Russian nationals or natural persons residing in Russia, legal persons, entities or bodies established in Russia or a legal person, entity or body established outside the Union and whose proprietary rights are directly or indirectly owned for more than 50 % by Russian nationals or natural persons residing in Russia, if the total value of deposits of that natural or legal person, entity or body per credit institution exceeds EUR 100 000 .

    ▼M17

    2.  
    It shall be prohibited to provide crypto-asset wallet, account or custody services to Russian nationals or natural persons residing in Russia, or legal persons, entities or bodies established in Russia.

    ▼M26

    2a.  
    It shall be prohibited as from 18 January 2024 to allow Russian nationals or natural persons residing in Russia to directly or indirectly own or control, or to hold any posts in the governing bodies of, a legal person, entity or body which is incorporated or constituted under the law of a Member State and is providing the services referred to in paragraph 2.

    ▼M26

    3.  
    Paragraphs 1, 2 and 2a shall not apply to nationals of a Member State, of a country member of the European Economic Area or of Switzerland, or to natural persons having a temporary or permanent residence permit in a Member State, in a country member of the European Economic Area or in Switzerland.

    ▼M16 —————

    ▼M15

    Article 5c

    1.  

    By way of derogation from Articles 5b(1) and (2), the competent authorities may authorise the acceptance of such a deposit or the provision of wallet, account or custody service, under such conditions as they deem appropriate, after having determined that the acceptance of such a deposit or the provision of wallet, account or custody service is:

    (a) 

    necessary to satisfy the basic needs of natural or legal persons, entities or bodies referred to in Article 5b(1) and their dependent family members, including payments for food, rent or mortgage, medicines and medical treatment, taxes, insurance premiums, and public utility charges;

    (b) 

    intended exclusively for the payment of reasonable professional fees or the reimbursement of incurred expenses associated with the provision of legal services;

    (c) 

    intended exclusively for the payment of fees or service charges for the routine holding or maintenance of frozen funds or economic resources;

    (d) 

    necessary for extraordinary expenses, provided that the relevant competent authority has notified the competent authorities of the other Member States and the Commission of the grounds on which it considers that a specific authorisation should be granted, at least two weeks prior to the authorisation; or

    (e) 

    necessary for official purposes of a diplomatic mission or consular post or international organisation; or

    ▼M16

    (f) 

    necessary for non-prohibited cross-border trade in goods and services between the Union and Russia.

    ▼M15

    2.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 1, points (a), (b), (c) or (e), within two weeks of the authorisation.

    ▼M7

    Article 5d

    ▼M13

    1.  

    By way of derogation from Articles 5b(1) and (2), the competent authorities may authorise the acceptance of such a deposit or provision of wallet, account or custody service, under such conditions as they deem appropriate, after having determined that the acceptance of such a deposit or provision of wallet, account or custody service is:

    ▼M7

    (a) 

    necessary for humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations; or

    (b) 

    necessary for civil society activities that directly promote democracy, human rights or the rule of law in Russia.

    2.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 1 within two weeks of the authorisation.

    Article 5e

    1.  
    It shall be prohibited for Union central securities depositories to provide any services as defined in the Annex of Regulation (EU) No 909/2014 for transferable securities issued after 12 April 2022 to any Russian national or natural person residing in Russia or any legal person, entity or body established in Russia.

    ▼M16

    2.  
    Paragraph 1 shall not apply to nationals of a Member State, of a country member of the European Economic Area or of Switzerland, or to natural persons having a temporary or permanent residence permit in a Member State, in a country member of the European Economic Area or in Switzerland.

    ▼M7

    Article 5f

    ▼M25

    1.  
    It shall be prohibited to sell transferable securities denominated in any official currency of a Member State issued after 12 April 2022, or denominated in any other currency issued after 6 August 2023, or units in collective investment undertakings providing exposure to such securities, to any Russian national or natural person residing in Russia or any legal person, entity or body established in Russia.

    ▼M15

    2.  
    Paragraph 1 shall not apply to nationals of a Member State, of a country member of the European Economic Area or of Switzerland, or to natural persons having a temporary or permanent residence permit in a Member State, in a country member of the European Economic Area or in Switzerland.

    ▼M7

    Article 5g

    1.  

    Without prejudice to the applicable rules concerning reporting, confidentiality and professional secrecy, credit institutions shall:

    (a) 

    supply to the national competent authority of the Member State where they are located or to the Commission by no later than 27 May 2022, a list of deposits exceeding 100 000  EUR held by Russian nationals or natural persons residing in Russia, or by legal persons, entities or bodies established in Russia. They shall provide updates regarding the amounts of such deposits every 12 months;

    ▼M20

    (aa) 

    supply to the national competent authority of the Member State where they are located or to the Commission by no later than 27 May 2023 a list of deposits exceeding 100 000  EUR held by a legal person, entity or body established outside the Union and whose proprietary rights are directly or indirectly owned for more than 50 % by Russian nationals or natural persons residing in Russia. They shall provide updates regarding the amounts of such deposits every 12 months;

    ▼M7

    (b) 

    supply to the national competent authority of the Member State where they are located information on deposits exceeding EUR 100 000 held by Russian nationals or natural persons residing in Russia who have acquired the citizenship of a Member State or residence rights in a Member State through an investor citizenship scheme or an investor residence scheme.

    ▼M15

    Article 5h

    1.  
    It shall be prohibited to provide specialised financial messaging services, which are used to exchange financial data, to the legal persons, entities or bodies listed in Annex XIV or to any legal person, entity or body established in Russia whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex XIV.
    2.  
    For each legal person, entity or body listed in Annex XIV, the prohibition set out in paragraph 1 shall apply as of the date mentioned for it in that Annex. The prohibition shall apply as of the same date to any legal person, entity or body established in Russia whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex XIV.

    ▼M13

    Article 5i

    1.  
    It shall be prohibited to sell, supply, transfer or export banknotes denominated in any official currency of a Member State to Russia or to any natural or legal person, entity or body in Russia, including the government and the Central Bank of Russia, or for use in Russia.
    2.  

    The prohibition in paragraph 1 shall not apply to the sale, supply, transfer or export of banknotes denominated in any official currency of a Member State provided that such sale, supply, transfer or export is necessary for:

    (a) 

    the personal use of natural persons travelling to Russia or members of their immediate families travelling with them; or

    (b) 

    the official purposes of diplomatic missions, consular posts or international organisations in Russia enjoying immunities in accordance with international law.

    ▼M12

    Article 5j

    ▼M16

    1.  
    It shall be prohibited to provide credit rating services to or on any Russian national or natural person residing in Russia or any legal person, entity or body established in Russia.

    ▼M12

    2.  
    It shall be prohibited as of 15 April 2022 to provide access to any subscription services in relation to credit rating activities to any Russian national or natural person residing in Russia or any legal person, entity or body established in Russia.
    3.  
    Paragraphs 1 and 2 shall not apply to nationals of a Member State or natural persons having a temporary or permanent residence permit in a Member State.

    ▼M13

    Article 5k

    ▼M25

    1.  

    It shall be prohibited to award or continue the execution of any public or concession contract falling within the scope of the public procurement Directives, as well as Article 10(1), (3), (6) points (a) to (e), (8), (9) and (10), Articles 11, 12, 13 and 14 of Directive 2014/23/EU, Article 7, points (a) to (d), and Article 8, Article 10 points (b) to (f) and (h) to (j) of Directive 2014/24/EU, Article 18, Article 21 points (b) to (e) and (g) to (i), Articles 29 and 30 of Directive 2014/25/EU and Article 13 points (a) to (d), (f) to (h) and (j) of Directive 2009/81/EC, to or with:

    ▼M16

    (a) 

    a Russian national, a natural person residing in Russia, or a legal person, entity or body established in Russia;

    (b) 

    a legal person, entity or body whose proprietary rights are directly or indirectly owned for more than 50 % by an entity referred to in point (a) of this paragraph; or

    (c) 

    a natural or legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph,

    including, where they account for more than 10 % of the contract value, subcontractors, suppliers or entities whose capacities are being relied on within the meaning of the public procurement Directives.

    ▼M13

    2.  

    By way of derogation from paragraph 1, the competent authorities may authorise the award and continued execution of contracts intended for:

    ▼M26

    (a) 

    the operation, maintenance, decommissioning and radioactive waste management, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, such as the Paks II project, as well as the supply of precursor material for the production of medical radioisotopes and similar medical applications, critical technology for environmental radiation monitoring, as well as civil nuclear cooperation, in particular in the field of research and development;

    ▼M13

    (b) 

    intergovernmental cooperation in space programmes;

    (c) 

    the provision of strictly necessary goods or services which can only be provided, or which can only be provided in sufficient quantities, by the persons referred to in paragraph 1;

    (d) 

    the functioning of diplomatic and consular representations of the Union and of the Member States in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law; or

    ▼M15

    (e) 

    unless prohibited under Article 3m or 3n, the purchase, import or transport of natural gas and oil, including refined petroleum products, as well as titanium, aluminium, copper, nickel, palladium and iron ore from or through Russia into the Union.

    ▼M25 —————

    ▼M13

    3.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisations granted under this Article within two weeks of the authorisation.
    4.  
    The prohibitions in paragraph 1 shall not apply to the execution until 10 October 2022 of contracts concluded before 9 April 2022.

    Article 5l

    1.  
    It shall be prohibited to provide direct or indirect support, including financing and financial assistance or any other benefit under a Union, Euratom or Member State national programme and contracts within the meaning of Regulation (EU, Euratom) 2018/1046 ( 24 ), to any legal person, entity or body established in Russia with over 50 % public ownership or public control.
    2.  

    The prohibition in paragraph 1 shall not apply to:

    (a) 

    humanitarian purposes, public health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment, or as a response to natural disasters;

    (b) 

    phytosanitary and veterinary programmes;

    (c) 

    intergovernmental cooperation in space programmes and under the International Thermonuclear Experimental Reactor Agreement;

    ▼M26

    (d) 

    the operation, maintenance, decommissioning and radioactive waste management, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, such as the Paks II project, as well as supply of precursor material for the production of medical radioisotopes and similar medical applications, critical technology for environmental radiation monitoring, as well as civil nuclear cooperation, in particular in the field of research and development;

    ▼M13

    (e) 

    mobility exchanges for individuals and people-to-people contacts;

    (f) 

    climate and environmental programmes, with the exception of support in the context of research and innovation;

    (g) 

    the functioning of diplomatic and consular representations of the Union and of the Member States in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law.

    ▼M15

    Article 5m

    1.  

    It shall be prohibited to register, provide a registered office, business or administrative address as well as management services to, a trust or any similar legal arrangement having as a trustor or a beneficiary:

    (a) 

    Russian nationals or natural persons residing in Russia;

    (b) 

    legal persons, entities or bodies established in Russia;

    (c) 

    legal persons, entities or bodies whose proprietary rights are directly or indirectly owned for more than 50 % by a natural or legal person, entity or body referred to in points (a) or (b);

    (d) 

    legal persons, entities or bodies controlled by a natural or legal person, entity or body referred to in points (a), (b) or (c);

    (e) 

    a natural or legal person, entity or body acting on behalf or at the direction of a natural or legal person, entity or body referred to in points (a), (b), (c) or (d).

    2.  
    It shall be prohibited as of 5 July 2022 to act as, or arrange for another person to act as, a trustee, nominee shareholder, director, secretary or a similar position, for a trust or similar legal arrangement as referred to in paragraph 1.
    3.  
    Paragraphs 1 and 2 shall not apply to the operations that are strictly necessary for the termination by 5 July 2022 of contracts which are not compliant with this Article concluded before 9 April 2022 or of ancillary contracts necessary for the execution of such contracts.

    ▼M17

    4.  
    Paragraphs 1 and 2 shall not apply when the trustor or beneficiary is a national of a Member State, of a country member of the European Economic Area or of Switzerland, or a natural person having a temporary or permanent residence permit in a Member State, in a country member of the European Economic Area or in Switzerland.

    ▼M15

    5.  

    By way of derogation from paragraph 2, the competent authorities may authorise, under such conditions as they deem appropriate, the services referred to in paragraph 2 to continue beyond 5 July 2022, for:

    (a) 

    the completion by 5 September 2022 of operations strictly necessary for the termination of contracts referred to in paragraph 3, provided that such operations were initiated before 11 May 2022; or

    (b) 

    other reasons, provided that the service providers do not accept from, or make available to, the persons referred to in paragraph 1 any funds or economic resources, directly or indirectly, or otherwise provide such persons with any benefit from assets placed in a trust.

    6.  

    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the services referred to in those paragraphs, under such conditions as they deem appropriate, after having determined that this is necessary for:

    (a) 

    humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations;

    (b) 

    civil society activities that directly promote democracy, human rights or the rule of law in Russia; or

    (c) 

    the operation of trusts whose purpose is the administration of occupational pension schemes, insurance policies or employee share scheme, charities, amateur sports clubs, and funds for minors or vulnerable adults.

    7.  
    The Member State concerned shall inform the Commission of any authorisation granted under paragraph 5 or 6 within two weeks of such authorisation.

    ▼M20

    Article 5n

    1.  

    It shall be prohibited to provide, directly or indirectly, accounting, auditing, including statutory audit, bookkeeping or tax consulting services, or business and management consulting or public relations services to:

    (a) 

    the Government of Russia; or

    (b) 

    legal persons, entities or bodies established in Russia.

    2.  

    It shall be prohibited to provide, directly or indirectly, architectural and engineering services, legal advisory services and IT consultancy services to:

    (a) 

    the Government of Russia; or

    (b) 

    legal persons, entities or bodies established in Russia.

    ▼M26

    2a.  

    It shall be prohibited to provide, directly or indirectly, market research and public opinion polling services, technical testing and analysis services and advertising services to:

    ▼M20

    (a) 

    the Government of Russia; or

    (b) 

    legal persons, entities or bodies established in Russia.

    ▼M26

    2b.  

    It shall be prohibited to sell, supply, transfer, export, or provide, directly or indirectly, software for the management of enterprises and software for industrial design and manufacture as listed in Annex XXXIX to:

    (a) 

    the Government of Russia; or

    (b) 

    legal persons, entities or bodies established in Russia.

    ▼M26 —————

    ▼M26

    3a.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and services referred to in paragraphs 1, 2, 2a and 2b for their provision, directly or indirectly, to the Government of Russia or legal persons, entities or bodies established in Russia;

    (b) 

    provide financing or financial assistance related to the goods and services referred to in paragraphs 1, 2, 2a and 2b for their provision, or for the provision of related technical assistance, brokering services or other services, directly or indirectly, to the Government of Russia or legal persons, entities or bodies established in Russia.

    4b.  
    Paragraph 2b shall not apply to the sale, supply, transfer, export or provision of software that is strictly necessary for the termination by 20 March 2024 of contracts which are not compliant with this Article concluded before 19 December 2023, or of ancillary contracts necessary for the execution of such contracts.

    ▼M20

    5.  
    Paragraphs 1 and 2 shall not apply to the provision of services that are strictly necessary for the exercise of the right of defence in judicial proceedings and the right to an effective legal remedy.
    6.  
    Paragraphs 1 and 2 shall not apply to the provision of services which are strictly necessary to ensure access to judicial, administrative or arbitral proceedings in a Member State, as well as for the recognition or enforcement of a judgment or an arbitration award rendered in a Member State, provided that such provision of services is consistent with the objectives of this Regulation and Regulation (EU) No 269/2014.

    ▼M26

    7.  
    Paragraphs 1, 2, 2a and 2b shall not apply until 20 June 2024 to the sale, supply, transfer, export or provision of services intended for the exclusive use of legal persons, entities or bodies established in Russia that are owned by, or solely or jointly controlled by, a legal person, entity or body which is incorporated or constituted under the law of a Member State, a country member of the European Economic Area, Switzerland or a partner country as listed in Annex VIII.
    8.  
    Paragraphs 2, 2a and 2b shall not apply to the sale, supply, transfer, export, or provision of services necessary for public health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment, or as a response to natural disasters.

    ▼M26 —————

    ▼M25

    9a.  

    By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the provision of services referred to therein, under such conditions as they deem appropriate, after having determined that those services are strictly necessary for the setting-up, certification or evaluation of a firewall which:

    (a) 

    removes the control by a natural or legal person, entity or body listed in Annex I to Regulation (EU) No 269/2014, over the assets of a non-listed legal person, entity or body incorporated or constituted under the law of a Member State which is owned or controlled by the former; and

    (b) 

    ensures that no further funds or economic resources accrue to the benefit of the listed natural or legal person, entity or body.

    ▼M26

    9b.  
    By way of derogation from paragraph 2b, the competent authorities may authorise the provision of services referred to therein, under such conditions as they deem appropriate, after having determined that those services are necessary for the contribution of Russian nationals to international open-source projects.

    ▼M26

    10.  

    By way of derogation from paragraphs 1, 2, 2a, 2b and 3a, the competent authorities may authorise the sale, supply, transfer, export, or provision of the services referred to therein, under such conditions as they deem appropriate, after having determined that this is necessary for:

    ▼M20

    (a) 

    humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance, or for evacuations;

    (b) 

    civil society activities that directly promote democracy, human rights or the rule of law in Russia;

    (c) 

    the functioning of diplomatic and consular representations of the Union and of the Member States or partner countries in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law;

    (d) 

    ensuring critical energy supply within the Union and the purchase, import or transport into the Union of titanium, aluminium, copper, nickel, palladium and iron ore;

    (e) 

    ensuring the continuous operation of infrastructures, hardware and software which are critical for human health and safety, or the safety of the environment;

    ▼M26

    (f) 

    the establishment, operation, maintenance, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, such as the Paks II project, the supply of precursor material for the production of medical radioisotopes and similar medical applications, or critical technology for environmental radiation monitoring, as well as for civil nuclear cooperation, in particular in the field of research and development;

    ▼M20

    (g) 

    the provision of electronic communication services by Union telecommunication operators necessary for the operation, maintenance and security, including cybersecurity, of electronic communication services, in Russia, in Ukraine, in the Union, between Russia and the Union, and between Ukraine and the Union, and for data centre services in the Union;

    ▼M26

    (h) 

    the exclusive use of legal persons, entities or bodies established in Russia that are owned by, or solely or jointly controlled by, a legal person, entity or body which is incorporated or constituted under the law of a Member State, a country member of the European Economic Area, Switzerland or a partner country as listed in Annex VIII.

    ▼M26

    11.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 9a, 9b and 10 within two weeks of the authorisation.

    ▼M24

    Article 5o

    1.  
    It shall be prohibited as of 27 March 2023 to allow Russian nationals or natural persons residing in Russia to hold any posts in the governing bodies of the owners or operators of critical infrastructures, European critical infrastructures and critical entities.
    2.  
    Paragraph 1 shall not apply to nationals of a Member State, of a country member of the European Economic Area or of Switzerland.

    Article 5p

    1.  

    It shall be prohibited to provide storage capacity as defined in Article 2(1), point 28 of Regulation (EC) No 715/2009 of the European Parliament and of the Council ( 25 ) in a storage facility as defined in Article 2, point 9 of Directive 2009/73/EC of the European Parliament and of the Council ( 26 ), except for the part of liquefied natural gas facilities used for storage, to:

    (a) 

    a Russian national, a natural person residing in Russia, or a legal person, entity or body established in Russia;

    (b) 

    a legal person, entity or body whose proprietary rights are directly or indirectly owned for more than 50 % by a legal person, entity or body referred to in point (a) of this paragraph; or

    (c) 

    a natural or legal person, entity or body acting on behalf or at the direction of a legal person, entity or body referred to in point (a) or (b) of this paragraph.

    ▼M26 —————

    ▼M24

    3.  
    By way of derogation from paragraph 1, the competent authorities may authorise, under such conditions as they deem appropriate, the provision of storage capacity as referred to in paragraph 1 after having determined that it is necessary for ensuring critical energy supply within the Union.
    4.  
    The Member State or Member States concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 3 within two weeks of the authorisation.

    ▼M25

    Article 5q

    1.  

    By way of derogation from Articles 2, 2a, 3f and 3k, the competent authorities may authorise the sale, supply, transfer, export or transit through Russia of the goods and technology referred to in those Articles, or the provision of related technical assistance, brokering services or other services, or financing or financial assistance, for the operation and maintenance of the Caspian Pipeline Consortium (CPC) pipelines and associated infrastructure necessary for the transport of goods falling under CN 2709 00 originating in Kazakhstan and which are only being loaded in, departing from or transiting through Russia, under such conditions as they deem appropriate, after having determined that:

    (a) 

    such a sale, supply, transfer, export, transit through Russia or the provision of related technical assistance, brokering services or other services, or financing and financial assistance, is necessary for the operation, essential maintenance, repair or replacement of components of the CPC pipeline and associated infrastructure;

    (b) 

    the type of goods, technologies and assistance requested does not go beyond the type of goods and technology previously exported from, or the assistance previously provided from, the Union, a country member of the European Economic Area, Switzerland or a partner country as listed in Annex VIII to Russia for the operation, essential maintenance, repair or replacement of components of the CPC pipeline and associated infrastructure, and related assistance;

    (c) 

    the requested volumes are commensurate with those used for the operation, essential maintenance, repair or replacement of components of the CPC pipeline and associated infrastructure; and

    (d) 

    such goods and technology will be provided by a natural or legal person subject to Article 13 exclusively for end use in the operation, essential maintenance, repair or replacement of components of the CPC pipeline and associated infrastructure.

    2.  

    By way of derogation from Article 5n, the competent authorities may authorise the provision of auditing services, engineering services, legal advisory services, technical testing and analysis services for the operation and maintenance of the CPC pipelines and associated infrastructure necessary for the transport of goods falling under CN 2709 00 originating in Kazakhstan and which are only being loaded in, departing from or transiting through Russia after having determined that:

    (a) 

    the provision of those services is necessary for the operation, essential maintenance, repair or replacement of components of the CPC pipeline and associated infrastructure; and

    (b) 

    such services are provided by a natural or legal person subject to Article 13.

    3.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 1 and 2 within two weeks of the authorisation.
    4.  
    When granting an authorisation under paragraphs 1 and 2, the competent authority shall require the presentation of an end-user certificate and detailed regular reports indicating that no such goods, technology or services were diverted from their intended purpose during the relevant works. It may impose additional conditions, in accordance with paragraph 1.

    ▼M26

    Article 5r

    1.  

    Legal persons, entities and bodies established in the Union whose proprietary rights are directly or indirectly owned for more than 40 % by:

    (a) 

    a legal person, entity or body established in Russia;

    (b) 

    a Russian national; or

    (c) 

    a natural person residing in Russia,

    shall, as of 1 May 2024, report to the competent authority of the Member State where they are established, within two weeks of the end of each quarter, any transfer of funds exceeding 100 000  EUR out of the Union that they made during that quarter, directly or indirectly, in one or several operations.

    2.  
    Notwithstanding the applicable rules concerning reporting, confidentiality and professional secrecy, credit and financial institutions shall, as of 1 July 2024, report to the competent authority of the Member State where they are located, within two weeks of the end of each semester, information on all transfers of funds out of the Union of a cumulative amount, over that semester, exceeding 100 000  EUR that they initiated, directly or indirectly, for the legal persons, entities and bodies referred to in paragraph 1.
    3.  
    Member States shall assess the information received in accordance with paragraphs 1 and 2 to identify transactions, entities and business sectors that indicate a serious risk of breaches or circumvention of, or use of funds for purposes incompatible with, this Regulation or Council Regulations (EU) No 269/2014, (EU) No 692/2014 ( 27 ) or (EU) 2022/263 ( 28 ), or Council Decisions 2014/145/CFSP ( 29 ), 2014/386/CFSP ( 30 ), 2014/512/CFSP or (CFSP) 2022/266 ( 31 ), and shall regularly inform each other and the Commission of their findings.
    4.  
    Based on the information received from the Member States under paragraph 3, the Commission shall review the functioning of the measures provided for in this Article no later than 20 December 2024.

    ▼M7

    Article 6

    1.  

    The Member States and the Commission shall inform each other of the measures taken under this Regulation and share any other relevant information at their disposal in connection with this Regulation, in particular information in respect of:

    ▼M25

    (a) 

    authorisations granted or denied under this Regulation;

    ▼M7

    (b) 

    information received under Article 5g;

    (c) 

    violation and enforcement problems and judgments handed down by national courts;

    ▼M25

    (d) 

    detected instances of breach, circumvention and attempts at breach or circumvention of the prohibitions set out in this Regulation including through the use of crypto-assets.

    ▼M7

    2.  
    The Member States shall immediately inform each other and the Commission of any other relevant information at their disposal which might affect the effective implementation of this Regulation.
    3.  
    Any information provided or received in accordance with this Article shall be used for the purposes for which it was provided or received, including ensuring the effectiveness of the measures set out in this Regulation.

    ▼M25

    Article 6a

    1.  
    The Member State or Member States concerned shall inform the other Member States and the Commission of any authorisation denied under Articles 3, 3a, 3b, 3c, 3d, 3ea, 3f, 3g, 3h, 3i, 3k, 3m, 3n, 5a, 5c, 5d, 5k, 5m, 5n, 5p and 12b within two weeks of the denial.
    2.  
    Before a Member State grants an authorisation in accordance with Articles 3, 3a, 3b, 3c, 3d, 3ea, 3f, 3g, 3h, 3i, 3k, 3m, 3n, 5a, 5c, 5d, 5k, 5m, 5n, 5p and 12b for a transaction which is essentially identical to a transaction which is the subject of a denial that is still valid issued by another Member State or by other Member States, it shall first consult the Member State or Member States which issued the denial. If, following such consultations, the Member State concerned decides to grant an authorisation, it shall inform the other Member States and the Commission thereof, providing all relevant information to explain that decision.

    Article 6b

    1.  

    Consistent with respect for the confidentiality of communications between lawyers and their clients guaranteed in Article 7 of the Charter of Fundamental Rights of the European Union and, where applicable, without prejudice to rules regarding the confidentiality of information held by judicial authorities, natural and legal persons, entities and bodies shall:

    (a) 

    supply any information which would facilitate the implementation of this Regulation to the competent authority of the Member State where they are resident or located within two weeks of acquiring this information; and

    (b) 

    cooperate with the competent authority in any verification of such information.

    ▼M26

    1a.  
    For the purposes of paragraph 1, the confidentiality of communications between lawyers and their clients shall include the confidentiality of communications relating to legal advice provided by other certified professionals who are authorised under national law to represent their clients in judicial proceedings, insofar as such legal advice is provided in connection with pending or prospective judicial proceedings.

    ▼M25

    2.  
    The Member State concerned shall transmit to the Commission any relevant information received pursuant to paragraph 1 within one month of receiving it. The Member State concerned may transmit such information in an anonymised form if an investigating or judicial authority has declared it to be confidential in the context of pending criminal investigations or criminal judicial proceedings.
    3.  
    Any additional information received directly by the Commission shall be made available to the Member States.

    ▼M26

    4.  
    Any information provided or received in accordance with this Article shall be used only for the purposes for which it was provided or received.

    ▼M7

    Article 7

    The Commission shall be empowered to amend Annexes I and IX on the basis of information supplied by Member States.

    ▼M17

    Article 7a

    The Commission shall amend:

    (a) 

    Annex XXVIII in accordance with the decisions of the Council amending Decision 2014/512/CFSP to update the prices agreed by the Price Cap Coalition; and

    (b) 

    Annex XXIX, in accordance with the decisions of the Council amending Decision 2014/512/CFSP to update the list of exempted energy projects on the basis of objective eligibility criteria agreed by the Price Cap Coalition.

    ▼B

    Article 8

    ▼M15

    1.  
    Member States shall lay down the rules on penalties, including as appropriate criminal penalties, applicable to infringements of the provisions of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for must be effective, proportionate and dissuasive. Member States shall also provide for appropriate measures of confiscation of the proceeds of such infringements.

    ▼B

    2.  
    Member States shall notify the rules referred to in paragraph 1 to the Commission without delay after the entry into force of this Regulation and shall notify it of any subsequent amendment.

    Article 9

    1.  
    Member States shall designate the competent authorities referred to in this Regulation and identify them on the websites listed in Annex I. Member States shall notify the Commission of any changes in the addresses of their websites listed in Annex I.
    2.  
    Member States shall notify the Commission of their competent authorities, including the contact details of those competent authorities, without delay after the entry into force of this Regulation, and shall notify it of any subsequent amendment.
    3.  
    Where this Regulation sets out a requirement to notify, inform or otherwise communicate with the Commission, the address and other contact details to be used for such communication shall be those indicated in Annex I.

    Article 10

    Actions by natural or legal persons, entities or bodies shall not give rise to liability of any kind on their part, if they did not know, and had no reasonable cause to suspect, that their actions would infringe the measures set out in this Regulation.

    ▼M7

    Article 11

    1.  

    No claims in connection with any contract or transaction the performance of which has been affected, directly or indirectly, in whole or in part, by the measures imposed under this Regulation, including claims for indemnity or any other claim of this type, such as a claim for compensation or a claim under a guarantee, notably a claim for extension or payment of a bond, guarantee or indemnity, particularly a financial guarantee or financial indemnity, of whatever form, shall be satisfied, if they are made by:

    ▼M13

    (a) 

    legal persons, entities or bodies listed in the Annexes to this Regulation or legal persons, entities or bodies established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by them;

    ▼M7

    (b) 

    any other Russian person, entity or body;

    (c) 

    any person, entity or body acting through or on behalf of one of the persons, entities or bodies referred to in points (a) or (b) of this paragraph.

    2.  
    In any proceedings for the enforcement of a claim, the onus of proving that satisfying the claim is not prohibited by paragraph 1 shall be on the person seeking the enforcement of that claim.
    3.  
    This Article is without prejudice to the right of the persons, entities and bodies referred to in paragraph 1 to judicial review of the legality of the non-performance of contractual obligations in accordance with this Regulation.

    ▼M12

    Article 12

    It shall be prohibited to participate, knowingly and intentionally, in activities the object or effect of which is to circumvent prohibitions in this Regulation.

    ▼M7

    Article 12a

    1.  
    The Commission shall process personal data in order to carry out its tasks under this Regulation. These tasks include the handling of information on deposits and information on authorisations granted by the competent authorities.

    ▼M25

    2.  
    For the purposes of this Regulation, the Commission is designated as ‘controller’ within the meaning of Article 3(8) of Regulation (EU) 2018/1725 in relation to the processing activities necessary to accomplish the tasks referred to in paragraph 1.
    3.  
    The competent authorities of the Member States, including enforcement authorities, customs authorities within the meaning of Regulation (EU) No 952/2013 of the European Parliament and of the Council ( 32 ), competent authorities within the meaning of Regulation (EU) No 575/2013, Directive (EU) 2015/849 of the European Parliament and of the Council ( 33 ) and Directive 2014/65/EU, as well as administrators of official registers wherein natural persons, legal persons, entities and bodies as well as immovable or movable property are registered, shall process and exchange without delay information, including personal data and, if necessary, the information referred to in Article 6b(1), with other competent authorities of their Member State, of other Member States and the Commission, if such processing and exchange is necessary to carry out the tasks of the processing authority or the receiving authority under this Regulation, in particular when they detect instances of a breach or circumvention, or attempts at a breach or circumvention of the prohibitions set out in this Regulation. This provision is without prejudice to rules regarding the confidentiality of information held by judicial authorities.

    ▼M16

    4.  
    Any processing of personal data shall be carried out in accordance with this Regulation and Regulations (EU) 2016/679 ( 34 ) and (EU) 2018/1725 ( 35 ) of the European Parliament and of the Council and only in so far as necessary for the application of this Regulation and to ensure effective cooperation between Member States as well as with the European Commission in the application of this Regulation.

    ▼M20

    Article 12b

    ▼M26

    1.  

    By way of derogation from Articles 2, 2a, 3, 3b, 3c, 3f, 3h and 3k, the competent authorities may authorise the sale, supply or transfer of goods and technologies listed in Annexes II, VII, X, XI, XVI, XVIII, XX and XXIII to this Regulation and in Annex I to Regulation (EU) 2021/821 as well as the sale, licensing or transfer in any other way of intellectual property rights or trade secrets as well as granting rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets, related to the goods and technology mentioned above until 30 June 2024, where such sale, supply, transfer, licensing, granting rights to access or re-use is strictly necessary for the divestment from Russia or the wind-down of business activities in Russia, provided that the following conditions are fulfilled:

    ▼M20

    (a) 

    the goods and technologies are owned by a national of a Member State or by a legal person, entity or body which is incorporated or constituted under the law of a Member State or by legal persons, entities or bodies established in Russia that are owned by, or solely or jointly controlled by, a legal person, entity or body which is incorporated or constituted under the law of a Member State; and

    (b) 

    the competent authorities deciding on requests for authorisations have no reasonable grounds to believe that the goods might be for a military end-user or have a military end-use in Russia; and

    (c) 

    the concerned goods and technologies were physically located in Russia before the relevant prohibitions in Articles 2, 2a, 3, 3b, 3c, 3f, 3h or 3k entered into force in respect of those goods and technologies.

    ▼M26

    1a.  
    By way of derogation from Article 3, the competent authorities may authorise the sale, supply or transfer of goods and technologies listed in Annex II until 30 September 2024, where such sale, supply or transfer is strictly necessary for the divestment from a joint venture incorporated or constituted under the law of a Member State before 24 February 2022, involving a Russian legal person, entity or body, and operating a gas pipeline infrastructure between Russia and third countries.
    2.  

    By way of derogation from Articles 3g and 3i, the competent authorities may authorise the import or transfer of goods listed in Annexes XVII and XXI until 30 June 2024, where such import or transfer is strictly necessary for the divestment from Russia or the wind-down of business activities in Russia, provided that the following conditions are fulfilled:

    ▼M20

    (a) 

    the goods are owned by a national of a Member State or by a legal person, entity or body which is incorporated or constituted under the law of a Member State or by legal persons, entities or bodies established in Russia that are owned by, or solely or jointly controlled by, a legal person, entity or body which is incorporated or constituted under the law of a Member State; and

    (b) 

    the concerned goods were physically located in Russia before the relevant prohibitions in Articles 3g and 3i entered into force in respect of those goods.

    ▼M26

    2a.  

    By way of derogation from Article 5n, the competent authorities may authorise the continuation of the provision of services listed therein until 31 July 2024 where such provision of services is strictly necessary for the divestment from Russia or the wind-down of business activities in Russia, provided that the following conditions are fulfilled:

    ▼M24

    (a) 

    such services are provided to and for the exclusive benefit of the legal persons, entities or bodies resulting from the divestment; and

    (b) 

    the competent authorities deciding on requests for authorisations have no reasonable grounds to believe that the services might be provided, directly or indirectly, to the Government of Russia or a military end-user or have a military end-use in Russia.

    ▼M25

    2b.  
    By way of derogation from Article 5n(2), the competent authorities may authorise the provision, until 31 March 2024, of legal advisory services which are legally required for the completion of a sale or transfer of proprietary rights directly or indirectly owned by legal persons, entities or bodies established in Russia in a legal person, entity or body established in the Union.

    ▼M25

    3.  
    The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 1, 1a, 2, 2a or 2b within two weeks of the authorisation.

    ▼M20

    4.  
    All authorisations referred to in paragraph 1 with respect to goods and technologies listed in Annex VII as well as in Annex I to Regulation (EU) 2021/821 shall be issued by electronic means, whenever possible, on forms containing at least all the elements of, and in the order provided for in, the model C set out in Annex IX.

    Article 12c

    1.  
    The competent authorities shall exchange information with the other Member States and the Commission on authorisations granted pursuant to paragraph 1 of Article 12b in relation to goods and technologies listed in Annex VII as well as in Annex I to Regulation (EU) 2021/821. The exchange of information shall be carried out using the electronic system provided pursuant to Article 23(6) of Regulation (EU) 2021/821.
    2.  
    Information received as a result of the application of this Article shall be used only for the purpose for which it was requested, including the exchanges mentioned in paragraph 4 of Article 2d.
    3.  
    Member States and the Commission shall ensure the protection of confidential information acquired in the application of this Article in accordance with Union law and the respective national law.
    4.  
    Member States and the Commission shall ensure that classified information provided or exchanged under this Article is not downgraded or declassified without the prior written consent of the originator.

    ▼M26

    Article 12d

    The prohibitions laid down in this Regulation shall not apply to the provision of pilot services which are necessary for reasons of maritime safety.

    ▼M24

    Article 12e

    1.  
    For the purposes of the prohibitions on importing goods provided for in this Regulation, goods physically in the Union may be released as provided for in Article 5, point (26) of the Union Customs Code ( 36 ) by the customs authorities provided that they have been presented to customs in accordance with Article 134 of the Union Customs Code before the entry into force or applicability date of the respective import prohibitions, whichever is latest.
    2.  
    All procedural steps necessary for the release referred to in paragraphs 1 and 5 of the relevant goods pursuant to the Union Customs Code shall be allowed.
    3.  
    The customs authorities shall not allow the release of the goods if they have reasonable grounds to suspect circumvention and shall not authorise the re-export of the goods to Russia.
    4.  
    Payments in relation to such goods shall be consistent with the provisions and objectives of this Regulation, in particular the prohibition on purchasing, and Regulation (EU) No 269/2014.
    5.  
    Goods physically in the Union and presented to customs prior to 26 February 2023 which were stopped in application of this Regulation may be released by the customs authorities under the conditions provided for in paragraphs 1, 2, 3 and 4.

    ▼M25

    Article 12f

    1.  
    It shall be prohibited to sell, supply, transfer or export, directly or indirectly, goods and technology as listed in Annex XXXIII, whether or not originating in the Union, to any natural or legal person, entity or body in the third country specified in that Annex.
    2.  

    It shall be prohibited to:

    (a) 

    provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in the third country specified;

    (b) 

    provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in the third country specified;

    (c) 

    sell, license or transfer in any other way intellectual property rights or trade secrets as well as grant rights to access or re-use any material or information protected by means of intellectual property rights or constituting trade secrets related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in the third country specified.

    3.  
    Annex XXXIII shall only include sensitive dual-use goods and technology, or goods and technology that might contribute to the enhancement of Russia’s military, technological or industrial capacities or to the development of Russia’s defence and security sector, in a way that strengthens its ability to wage war, and whose export to Russia is prohibited under this Regulation and that present a high and continuous risk of being sold, supplied, transferred or exported from third countries to Russia after being sold, supplied, transferred or exported from the Union. Annex XXXIII shall specify, for each item of listed goods or technology, the third countries to which the sale, supply, transfer or export is prohibited. Annex XXXIII shall only include third countries that have been identified by the Council as having systematically and persistently failed to prevent the sale, supply, transfer or export to Russia of goods and technology, as listed in that Annex, exported from the Union, despite the Union’s prior outreach and assistance to the country in question.
    4.  
    If the sale, supply, transfer or export of goods or technology listed in Annex XXXIII to a natural or legal person, entity or body in Russia or for use in Russia is not prohibited under certain exemptions provided for in this Regulation, their sale, supply, transfer or export to a natural or legal person, entity or body in the third country specified shall not be prohibited, provided that the same conditions applicable under this Regulation for export to Russia or for use in Russia are fulfilled.
    5.  
    If the sale, supply, transfer or export of goods or technology listed in Annex XXXIII to a natural or legal person, entity or body in Russia or for use in Russia can be authorised by the competent authorities in accordance with this Regulation, their sale, supply, transfer or export to a natural or legal person, entity or body in the third country specified may be authorised by the competent authorities under the same conditions applicable to derogations for exports to Russia or for use in Russia.

    ▼M26

    Article 12g

    1.  
    When selling, supplying, transferring or exporting to a third country, with the exception of partner countries listed in Annex VIII to this Regulation, goods or technology as listed in Annexes XI, XX and XXXV to this Regulation, common high priority items as listed in Annex XL to this Regulation, or firearms and ammunition as listed in Annex I to Regulation (EU) No 258/2012, exporters shall, as of 20 March 2024, contractually prohibit re-exportation to Russia and re-exportation for use in Russia.
    2.  
    Paragraph 1 shall not apply to the execution of contracts concluded before 19 December 2023 until 20 December 2024 or until their expiry date, whichever is earlier.
    3.  
    In application of paragraph 1, exporters shall ensure that the agreement with the third-country counterpart contains adequate remedies in the event of a breach of a contractual obligation concluded in accordance with paragraph 1.
    4.  
    If the third-country counterpart breaches any of the contractual obligations concluded in accordance with paragraph 1, exporters shall inform the competent authority of the Member State where they are resident or established as soon as they become aware of the breach.
    5.  
    Member States shall inform each other and the Commission of detected instances of a breach or circumvention of a contractual obligation concluded in accordance with paragraph 1.

    ▼B

    Article 13

    This Regulation shall apply:

    (a) 

    within the territory of the Union;

    (b) 

    on board any aircraft or any vessel under the jurisdiction of a Member State;

    (c) 

    to any person inside or outside the territory of the Union who is a national of a Member State;

    (d) 

    to any legal person, entity or body, inside or outside the territory of the Union, which is incorporated or constituted under the law of a Member State;

    (e) 

    to any legal person, entity or body in respect of any business done in whole or in part within the Union.

    Article 14

    This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

    This Regulation shall be binding in its entirety and directly applicable in all Member States.

    ▼M14




    ANNEX I

    BELGIUM

    https://diplomatie.belgium.be/en/policy/policy_areas/peace_and_security/sanctions

    BULGARIA

    https://www.mfa.bg/en/EU-sanctions

    CZECHIA

    www.financnianalytickyurad.cz/mezinarodni-sankce.html

    DENMARK

    http://um.dk/da/Udenrigspolitik/folkeretten/sanktioner/

    GERMANY

    https://www.bmwi.de/Redaktion/DE/Artikel/Aussenwirtschaft/embargos-aussenwirtschaftsrecht.html

    ESTONIA

    https://vm.ee/et/rahvusvahelised-sanktsioonid

    IRELAND

    https://www.dfa.ie/our-role-policies/ireland-in-the-eu/eu-restrictive-measures/

    GREECE

    http://www.mfa.gr/en/foreign-policy/global-issues/international-sanctions.html

    SPAIN

    https://www.exteriores.gob.es/es/PoliticaExterior/Paginas/SancionesInternacionales.aspx

    FRANCE

    http://www.diplomatie.gouv.fr/fr/autorites-sanctions/

    CROATIA

    https://mvep.gov.hr/vanjska-politika/medjunarodne-mjere-ogranicavanja/22955

    ITALY

    https://www.esteri.it/it/politica-estera-e-cooperazione-allo-sviluppo/politica_europea/misure_deroghe/

    CYPRUS

    https://mfa.gov.cy/themes/

    LATVIA

    http://www.mfa.gov.lv/en/security/4539

    LITHUANIA

    http://www.urm.lt/sanctions

    LUXEMBOURG

    https://maee.gouvernement.lu/fr/directions-du-ministere/affaires-europeennes/organisations-economiques-int/mesures-restrictives.html

    HUNGARY

    https://kormany.hu/kulgazdasagi-es-kulugyminiszterium/ensz-eu-szankcios-tajekoztato

    MALTA

    https://foreignandeu.gov.mt/en/Government/SMB/Pages/SMB-Home.aspx

    NETHERLANDS

    https://www.rijksoverheid.nl/onderwerpen/internationale-sancties

    AUSTRIA

    https://www.bmeia.gv.at/themen/aussenpolitik/europa/eu-sanktionen-nationale-behoerden/

    POLAND

    https://www.gov.pl/web/dyplomacja/sankcje-miedzynarodowe

    https://www.gov.pl/web/diplomacy/international-sanctions

    PORTUGAL

    https://www.portaldiplomatico.mne.gov.pt/politica-externa/medidas-restritivas

    ROMANIA

    http://www.mae.ro/node/1548

    SLOVENIA

    http://www.mzz.gov.si/si/omejevalni_ukrepi

    SLOVAKIA

    https://www.mzv.sk/europske_zalezitosti/europske_politiky-sankcie_eu

    FINLAND

    https://um.fi/pakotteet

    SWEDEN

    https://www.regeringen.se/sanktioner

    Address for notifications to the European Commission:

    European Commission

    Directorate-General for Financial Stability, Financial Services and Capital Markets Union (DG FISMA)

    Rue de Spa 2

    B-1049 Brussels, Belgium

    E-mail: [email protected]

    ▼B




    ANNEX II

    ▼M2

    List of items referred to in Article 3

    ▼B



    CN code

    Description

    7304 11 00

    Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel

    7304 19 10

    Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter not exceeding 168,3 mm (excl. products of stainless steel or of cast iron)

    7304 19 30

    Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm (excl. products of stainless steel or of cast iron)

    7304 19 90

    Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter exceeding 406,4 mm (excl. products of stainless steel or of cast iron)

    7304 22 00

    Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas

    7304 23 00

    Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron)

    7304 29 10

    Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter not exceeding 168,3 mm (excl. products of cast iron)

    7304 29 30

    Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm (excl. products of cast iron)

    7304 29 90

    Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter exceeding 406,4 mm (excl. products of cast iron)

    7305 11 00

    Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of exceeding 406,4 mm, of iron or steel, longitudinally submerged arc welded

    7305 12 00

    Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of exceeding 406,4 mm, of iron or steel, longitudinally arc welded (excl. products longitudinally submerged arc welded)

    7305 19 00

    Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of exceeding 406,4 mm, of flat-rolled products of iron or steel (excl. products longitudinally arc welded)

    7305 20 00

    Casing of a kind used in drilling for oil or gas, having circular cross-sections and an external diameter of exceeding 406,4 mm, of flat-rolled products of iron or steel

    7306 11

    Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of not exceeding 406,4 mm

    7306 19

    Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of not exceeding 406,4 mm (excl. products of stainless steel or of cast iron)

    7306 21 00

    Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of not exceeding 406,4 mm

    7306 29 00

    Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of not exceeding 406,4 mm (excl. products of stainless steel or of cast iron)

    8207 13 00

    Rock-drilling or earth-boring tools, interchangeable, with working parts of sintered metal carbides or cermets

    8207 19 10

    Rock-drilling or earth-boring tools, interchangeable, with working parts of diamond or agglomerated diamond

    ▼M2

    ex 8413 50

    Reciprocating positive displacement pumps for liquids, power-driven with a maximum flow-rate greater than 18 m3/hour and a maximum outlet pressure greater than 40 bar, specially designed to pump drilling muds and/or cement into oil wells

    ex 8413 60

    Rotary positive displacement pumps for liquids, power-driven with a maximum flow-rate greater than 18 m3/hour and a maximum outlet pressure greater than 40 bar, specially designed to pump drilling muds and/or cement into oil wells

    ▼B

    8413 82 00

    Liquid elevators (excl. pumps)

    8413 92 00

    Parts of liquid elevators, n.e.s.

    8430 49 00

    Boring or sinking machinery for boring earth or extracting minerals or ores, not self-propelled and not hydraulic (excl. tunnelling machinery and hand-operated tools)

    ▼M2

    ex 8431 39 00

    Parts suitable for use solely or principally with the oil field machinery of heading 8428

    ex 8431 43 00

    Parts suitable for use solely or principally with the oil field machinery of subheadings 8430 41 or 8430 49

    ex 8431 49

    Parts suitable for use solely or principally with the oil field machinery of heading 8426 , 8429 and 8430

    ▼B

    8705 20 00

    Mobile drilling derricks

    8905 20 00

    Floating or submersible drilling or production platforms

    8905 90 10

    Sea-going light vessels, fire-floats, floating cranes and other vessels, the navigability of which is subsidiary to their main function (excl. dredgers, floating or submersible drilling or production platforms; fishing vessels and warships)




    ▼M7

    ANNEX III

    List of legal persons, entities and bodies referred to in Article 5(1)(a)

    ▼B

    1. 

    SBERBANK

    2. 

    VTB BANK

    3. 

    GAZPROMBANK

    4. 

    VNESHECONOMBANK (VEB)

    5. 

    ROSSELKHOZBANK

    ▼M28




    ANNEX IV

    This Annex lists natural or legal persons, entities or bodies which are military end-users, form part of Russia’s military and industrial complex or which have commercial or other links with or which otherwise support Russia’s defence and security sector. These natural or legal persons, entities or bodies contribute to Russia’s military and technological enhancement or to the development of Russia’s defence and security sector. They include natural or legal persons, entities or bodies in third countries other than Russia. Their inclusion in this Annex does not entail any attribution of responsibility for their actions to the jurisdiction in which they are operating.

    List of natural or legal persons, entities or bodies, referred to in Articles 2(7), 2a(7) and 2b(1)

    1. 

    JSC Sirius (Russia)

    2. 

    OJSC Stankoinstrument (Russia)

    3. 

    OAO JSC Chemcomposite (Russia)

    4. 

    JSC Kalashnikov (Russia)

    5. 

    JSC Tula Arms Plant (Russia)

    6. 

    NPK Technologii Maschinostrojenija (Russia)

    7. 

    OAO Wysokototschnye Kompleksi (Russia)

    8. 

    OAO Almaz Antey (Russia)

    9. 

    OAO NPO Bazalt (Russia)

    10. 

    Admiralty Shipyard JSC (Russia)

    11. 

    Aleksandrov Scientific Research Technological Institute NITI (Russia)

    12. 

    Argut OOO (Russia)

    13. 

    Communication center of the Ministry of Defense (Russia)

    14. 

    Federal Research Center Boreskov Institute of Catalysis (Russia)

    15. 

    Federal State Budgetary Enterprise of the Administration of the President of Russia (Russia)

    16. 

    Federal State Budgetary Enterprise Special Flight Unit Rossiya of the Administration of the President of Russia (Russia)

    17. 

    Federal State Unitary Enterprise Dukhov Automatics Research Institute (VNIIA) (Russia)

    18. 

    Foreign Intelligence Service (SVR) (Russia)

    19. 

    Forensic Center of Nizhniy Novgorod Region Main Directorate of the Ministry of Interior Affairs (Russia)

    20. 

    International Center for Quantum Optics and Quantum Technologies (the Russian Quantum Center) (Russia)

    21. 

    Irkut Corporation (Russia)

    22. 

    Irkut Research and Production Corporation Public Joint Stock Company (Russia)

    23. 

    Joint Stock Company Scientific Research Institute of Computing Machinery (Russia)

    24. 

    JSC Central Research Institute of Machine Building (JSC TsNIIMash) (Russia)

    25. 

    JSC Kazan Helicopter Plant Repair Service (Russia)

    26. 

    JSC Shipyard Zaliv (Zaliv Shipbuilding yard) (Autonomous Republic of Crimea, illegally annexed by Russia)

    27. 

    JSC Rocket and Space Centre – Progress (Russia)

    28. 

    Kamensk-Uralsky Metallurgical Works J.S. Co. (Russia)

    29. 

    Kazan Helicopter Plant PJSC (Russia)

    30. 

    Komsomolsk-na-Amur Aviation Production Organization (KNAAPO) (Russia)

    31. 

    Ministry of Defence RF (Russia)

    32. 

    Moscow Institute of Physics and Technology (Russia)

    33. 

    NPO High Precision Systems JSC (Russia)

    34. 

    NPO Splav JSC (Russia)

    35. 

    OPK Oboronprom (Russia)

    36. 

    PJSC Beriev Aircraft Company (Russia)

    37. 

    PJSC Irkut Corporation (Russia)

    38. 

    PJSC Kazan Helicopters (Russia)

    39. 

    POLYUS Research Institute of M.F. Stelmakh Joint Stock Company (Russia)

    40. 

    Promtech-Dubna, JSC (Russia)

    41. 

    Public Joint Stock Company United Aircraft Corporation (Russia)

    42. 

    Radiotechnical and Information Systems (RTI) Concern (Russia)

    43. 

    Rapart Services LLC (Russia)

    44. 

    Rosoboronexport OJSC (ROE) (Russia)

    45. 

    Rostec (Russian Technologies State Corporation) (Russia)

    46. 

    Rostekh – Azimuth (Russia)

    47. 

    Russian Aircraft Corporation MiG (Russia)

    48. 

    Russian Helicopters JSC (Russia)

    49. 

    SP KVANT (Sovmestnoe Predpriyatie Kvantovye Tekhnologii) (Russia)

    50. 

    Sukhoi Aviation JSC (Russia)

    51. 

    Sukhoi Civil Aircraft (Russia)

    52. 

    Tactical Missiles Corporation JSC (Russia)

    53. 

    Tupolev JSC (Russia)

    54. 

    UEC-Saturn (Russia)

    55. 

    United Aircraft Corporation (Russia)

    56. 

    JSC AeroKompozit (Russia)

    57. 

    United Engine Corporation (Russia)

    58. 

    UEC-Aviadvigatel JSC (Russia)

    59. 

    United Instrument Manufacturing Corporation (Russia)

    60. 

    United Shipbuilding Corporation (Russia)

    61. 

    JSC PO Sevmash (Russia)

    62. 

    Krasnoye Sormovo Shipyard (Russia)

    63. 

    Severnaya Shipyard (Russia)

    64. 

    Shipyard Yantar (Russia)

    65. 

    UralVagonZavod (Russia)

    66. 

    Baikal Electronics (Russia)

    67. 

    Center for Technological Competencies in Radiophtonics (Russia)

    68. 

    Central Research and Development Institute Tsiklon (Russia)

    69. 

    Crocus Nano Electronics (Russia)

    70. 

    Dalzavod Ship-Repair Center (Russia)

    71. 

    Elara (Russia)

    72. 

    Electronic Computing and Information Systems (Russia)

    73. 

    ELPROM (Russia)

    74. 

    Engineering Center Ltd. (Russia)

    75. 

    Forss Technology Ltd. (Russia)

    76. 

    Integral SPB (Russia)

    77. 

    JSC Element (Russia)

    78. 

    JSC Pella-Mash (Russia)

    79. 

    JSC Shipyard Vympel (Russia)

    80. 

    Kranark LLC (Russia)

    81. 

    Lev Anatolyevich Yershov (Ershov) (Russia)

    82. 

    LLC Center (Russia)

    83. 

    MCST Lebedev (Russia)

    84. 

    Miass Machine-Building Factory (Russia)

    85. 

    Microelectronic Research and Development Center Novosibirsk (Russia)

    86. 

    MPI VOLNA (Russia)

    87. 

    N.A. Dollezhal Order of Lenin Research and Design Institute of Power Engineering (Russia)

    88. 

    Nerpa Shipyard (Russia)

    89. 

    NM-Tekh (Russia)

    90. 

    Novorossiysk Shipyard JSC (Russia)

    91. 

    NPO Electronic Systems (Russia)

    92. 

    NPP Istok (Russia)

    93. 

    NTC Metrotek (Russia)

    94. 

    OAO GosNIIkhimanalit (Russia)

    95. 

    OAO Svetlovskoye Predpriyatiye Era (Russia)

    96. 

    OJSC TSRY (Russia)

    97. 

    OOO Elkomtekh (Elkomtex) (Russia)

    98. 

    OOO Planar (Russia)

    99. 

    OOO Sertal (Russia)

    100. 

    Photon Pro LLC (Russia)

    101. 

    PJSC Zvezda (Russia)

    102. 

    Amur Shipbuilding Factory PJSC (Russia)

    103. 

    AO Center of Shipbuilding and Ship Repairing JSC (Russia)

    104. 

    AO Kronshtadt (Russia)

    105. 

    Avant Space LLC (Russia)

    106. 

    Production Association Strela (Russia)

    107. 

    Radioavtomatika (Russia)

    108. 

    Research Center Module (Russia)

    109. 

    Robin Trade Limited (Russia)

    110. 

    R.Ye. Alekseyev Central Design Bureau for Hydrofoil Ships (Russia)

    111. 

    Rubin Sever Design Bureau (Russia)

    112. 

    Russian Space Systems (Russia)

    113. 

    Rybinsk Shipyard Engineering (Russia)

    114. 

    Scientific Research Institute of Applied Chemistry (Russia)

    115. 

    Scientific-Research Institute of Electronics (Russia)

    116. 

    Scientific Research Institute of Hypersonic Systems (Russia)

    117. 

    Scientific Research Institute NII Submikron (Russia)

    118. 

    Sergey IONOV (Russia)

    119. 

    Serniya Engineering (Russia)

    120. 

    Severnaya Verf Shipbuilding Factory (Russia)

    121. 

    Ship Maintenance Center Zvezdochka (Russia)

    122. 

    State Governmental Scientific Testing Area of Aircraft Systems (GkNIPAS) (Russia)

    123. 

    State Machine Building Design Bureau Raduga Bereznya (Russia)

    124. 

    State Scientific Center AO GNTs RF—FEI A.I. Leypunskiy Physico-Energy Institute (Russia)

    125. 

    State Scientific Research Institute of Machine Building Bakhirev (GosNIImash) (Russia)

    126. 

    Tomsk Microwave and Photonic Integrated Circuits and Modules Collective Design Center (Russia)

    127. 

    UAB Pella-Fjord (Russia)

    128. 

    United Shipbuilding Corporation JSC ‘35th Shipyard’ (Russia)

    129. 

    United Shipbuilding Corporation JSC ‘Astrakhan Shipyard’ (Russia)

    130. 

    United Shipbuilding Corporation JSC ‘Aysberg Central Design Bureau’ (Russia)

    131. 

    United Shipbuilding Corporation JSC ‘Baltic Shipbuilding Factory’ (Russia)

    132. 

    United Shipbuilding Corporation JSC ‘Krasnoye Sormovo Plant OJSC’ (Russia)

    133. 

    United Shipbuilding Corporation JSC SC ‘Zvyozdochka’ (Russia)

    134. 

    United Shipbuilding Corporation ‘Pribaltic Shipbuilding Factory Yantar’ (Russia)

    135. 

    United Shipbuilding Corporation ‘Scientific Research Design Technological Bureau Onega’ (Russia)

    136. 

    United Shipbuilding Corporation ‘Sredne-Nevsky Shipyard’ (Russia)

    137. 

    Ural Scientific Research Institute for Composite Materials (Russia)

    138. 

    Urals Project Design Bureau Detal (Russia)

    139. 

    Vega Pilot Plant (Russia)

    140. 

    Vertikal LLC(Russia)

    141. 

    Vladislav Vladimirovich Fedorenko (Russia)

    142. 

    VTK Ltd (Russia)

    143. 

    Yaroslavl Shipbuilding Factory (Russia)

    144. 

    ZAO Elmiks-VS (Russia)

    145. 

    ZAO Sparta (Russia)

    146. 

    ZAO Svyaz Inzhiniring (Russia)

    147. 

    46th TSNII Central Scientific Research Institute (Russia)

    148. 

    Alagir Resistor Factory (Russia)

    149. 

    All-Russian Research Institute of Optical and Physical Measurements (Russia)

    150. 

    All-Russian Scientific-Research Institute Etalon JSC (Russia)

    151. 

    Almaz JSC (Russia)

    152. 

    Arzam Scientific Production Enterprise Temp Avia (Russia)

    153. 

    Automated Procurement System for State Defense Orders, LLC (Russia)

    154. 

    Dolgoprudniy Design Bureau of Automatics (DDBA JSC) (Russia)

    155. 

    Electronic Computing Technology Scientific-Research Center JSC (Russia)

    156. 

    Electrosignal JSC (Russia)

    157. 

    Energiya JSC (Russia)

    158. 

    Engineering Center Moselectronproekt (Russia)

    159. 

    Etalon Scientific and Production Association (Russia)

    160. 

    Evgeny Krayushin (Russia)

    161. 

    Foreign Trade Association Mashpriborintorg (Russia)

    162. 

    Ineko LLC (Russia)

    163. 

    Informakustika JSC (Russia)

    164. 

    Institute of High Energy Physics (Russia)

    165. 

    Institute of Theoretical and Experimental Physics (Russia)

    166. 

    Inteltech PJSC (Russia)

    167. 

    ISE SO RAN Institute of High-Current Electronics (Russia)

    168. 

    Kaluga Scientific-Research Institute of Telemechanical Devices JSC (Russia)

    169. 

    Kulon Scientific-Research Institute JSC (Russia)

    170. 

    Lutch Design Office JSC (Russia)

    171. 

    Meteor Plant JSC (Russia)

    172. 

    Moscow Communications Research Institute JSC (Russia)

    173. 

    Moscow Order of the Red Banner of Labor Research Radio Engineering Institute JSC (Russia)

    174. 

    NPO Elektromechaniki JSC (Russia)

    175. 

    Omsk Production Union Irtysh JSC (Russia)

    176. 

    Omsk Scientific-Research Institute of Instrument Engineering JSC (Russia)

    177. 

    Optron, JSC (Russia)

    178. 

    Pella Shipyard OJSC (Russia)

    179. 

    Polyot Chelyabinsk Radio Plant JSC (Russia)

    180. 

    Pskov Distance Communications Equipment Plant (Russia)

    181. 

    Radiozavod JSC (Russia)

    182. 

    Razryad JSC (Russia)

    183. 

    Research Production Association Mars (Russia)

    184. 

    Ryazan Radio-Plant (Russia)

    185. 

    Scientific Production Center Vigstar JSC (Russia)

    186. 

    Scientific Production Enterprise ‘Radiosviaz’ (Russia)

    187. 

    Scientific Research Institute Ferrite-Domen (Russia)

    188. 

    Scientific Research Institute of Communication Management Systems (Russia)

    189. 

    Scientific-Production Association and Scientific-Research Institute of Radio-Components (Russia)

    190. 

    Scientific-Production Enterprise ‘Kant’ (Russia)

    191. 

    Scientific-Production Enterprise ‘Svyaz’ (Russia)

    192. 

    Scientific-Production Enterprise Almaz JSC (Russia)

    193. 

    Scientific-Production Enterprise Salyut JSC (Russia)

    194. 

    Scientific-Production Enterprise Volna (Russia)

    195. 

    Scientific-Production Enterprise Vostok JSC (Russia)

    196. 

    Scientific-Research Institute ‘Argon’ (Russia)

    197. 

    Scientific-Research Institute and Factory Platan (Russia)

    198. 

    Scientific-Research Institute of Automated Systems and Communications Complexes Neptune JSC (Russia)

    199. 

    Special Design and Technical Bureau for Relay Technology (Russia)

    200. 

    Special Design Bureau Salute JSC (Russia)

    201. 

    Tactical Missile Company, Joint Stock Company ‘Salute’ (Russia)

    202. 

    Tactical Missile Company, Joint Stock Company ‘State Machine Building Design Bureau “Vympel” By Name I.I.Toropov’ (Russia)

    203. 

    Tactical Missile Company, Joint Stock Company ‘URALELEMENT’ (Russia)

    204. 

    Tactical Missile Company, Joint Stock Company ‘Plant Dagdiesel’ (Russia)

    205. 

    Tactical Missile Company, Joint Stock Company ‘Scientific Research Institute of Marine Heat Engineering’ (Russia)

    206. 

    Tactical Missile Company, Joint Stock Company PA Strela (Russia)

    207. 

    Tactical Missile Company, Joint Stock Company Plant Kulakov (Russia)

    208. 

    Tactical Missile Company, Joint Stock Company Ravenstvo (Russia)

    209. 

    Tactical Missile Company, Joint Stock Company Ravenstvo-service (Russia)

    210. 

    Tactical Missile Company, Joint Stock Company Saratov Radio Instrument Plant (Russia)

    211. 

    Tactical Missile Company, Joint Stock Company Severny Press (Russia)

    212. 

    Tactical Missile Company, Joint-Stock Company ‘Research Center for Automated Design’ (Russia)

    213. 

    Tactical Missile Company, KB Mashinostroeniya (Russia)

    214. 

    Tactical Missile Company, NPO Electromechanics (Russia)

    215. 

    Tactical Missile Company, NPO Lightning (Russia)

    216. 

    Tactical Missile Company, Petrovsky Electromechanical Plant ‘Molot’ (Russia)

    217. 

    Tactical Missile Company, PJSC ‘MBDB “ISKRA”’ (Russia)

    218. 

    Tactical Missile Company, PJSC ANPP Temp Avia (Russia)

    219. 

    Tactical Missile Company, Raduga Design Bureau (Russia)

    220. 

    Tactical Missile Corporation, ‘Central Design Bureau of Automation’ (Russia)

    221. 

    Tactical Missile Corporation, 711 Aircraft Repair Plant (Russia)

    222. 

    Tactical Missile Corporation, AO GNPP ‘Region’ (Russia)

    223. 

    Tactical Missile Corporation, AO TMKB ‘Soyuz’ (Russia)

    224. 

    Tactical Missile Corporation, Azov Optical and Mechanical Plant (Russia)

    225. 

    Tactical Missile Corporation, Concern ‘MPO – Gidropribor’ (Russia)

    226. 

    Tactical Missile Corporation, Joint Stock Company ‘KRASNY GIDROPRESS’ (Russia)

    227. 

    Tactical Missile Corporation, Joint Stock Company Avangard (Russia)

    228. 

    Tactical Missile Corporation, Joint Stock Company Concern Granit-Electron (Russia)

    229. 

    Tactical Missile Corporation, Joint Stock Company Elektrotyaga (Russia)

    230. 

    Tactical Missile Corporation, Joint Stock Company GosNIIMash (Russia)

    231. 

    Tactical Missile Corporation, RKB Globus (Russia)

    232. 

    Tactical Missile Corporation, Smolensk Aviation Plant (Russia)

    233. 

    Tactical Missile Corporation, TRV Engineering (Russia)

    234. 

    Tactical Missile Corporation, Ural Design Bureau ‘Detal’ (Russia)

    235. 

    Tactical Missile Corporation, Zvezda-Strela Limited Liability Company (Russia)

    236. 

    Tambov Plant (TZ) ‘October’ (Russia)

    237. 

    United Shipbuilding Corporation ‘Production Association Northern Machine Building Enterprise’ (Russia)

    238. 

    United Shipbuilding Corporation ‘5th Shipyard’ (Russia)

    239. 

    Federal Center for Dual-Use Technology (FTsDT) Soyuz (Russia)

    240. 

    Turayev Machine Building Design Bureau Soyuz (Russia)

    241. 

    Zhukovskiy Central Aerohydrodynamics Institute (TsAGI) (Russia)

    242. 

    Rosatomflot (Russia)

    243. 

    Lyulki Experimental-Design Bureau (Russia)

    244. 

    Lyulki Science and Technology Center (Russia)

    245. 

    AO Aviaagregat (Russia)

    246. 

    Central Aerohydrodynamic Institute (TsAGI) (Russia)

    247. 

    Closed Joint Stock Company Turborus (Turborus) (Russia)

    248. 

    Federal Autonomous Institution Central Institute of Engine-Building N.A. P.I. Baranov; Central Institute of Aviation Motors (CIAM) (Russia)

    249. 

    Federal State Budgetary Institution National Research Center Institute N.A. N.E. Zhukovsky (Zhukovsky National Research Institute) (Russia)

    250. 

    Federal State Unitary Enterprise ‘State Scientific-Research Institute for Aviation Systems’ (GosNIIAS) (Russia)

    251. 

    Joint Stock Company 123 Aviation Repair Plant (123 ARZ) (Russia)

    252. 

    Joint Stock Company 218 Aviation Repair Plant (218 ARZ) (Russia)

    253. 

    Joint Stock Company 360 Aviation Repair Plant (360 ARZ) (Russia)

    254. 

    Joint Stock Company 514 Aviation Repair Plant (514 ARZ) (Russia)

    255. 

    Joint Stock Company 766 UPTK (Russia)

    256. 

    Joint Stock Company Aramil Aviation Repair Plant (AARZ) (Russia)

    257. 

    Joint Stock Company Aviaremont (Aviaremont) (Russia)

    258. 

    Joint Stock Company Flight Research Institute N.A. M.M. Gromov (FRI Gromov) (Russia)

    259. 

    Joint Stock Company Metallist Samara (Metallist Samara) (Russia)

    260. 

    Joint Stock Company Moscow Machine-Building Enterprise Named After V.V. Chernyshev (MMP V.V. Chernyshev) (Russia)

    261. 

    JSC NII Steel (Russia)

    262. 

    Joint Stock Company Remdizel (Russia)

    263. 

    Joint Stock Company Special Industrial and Technical Base Zvezdochka (SPTB Zvezdochka) (Russia)

    264. 

    Joint Stock Company STAR (Russia)

    265. 

    Joint Stock Company Votkinsk Machine Building Plant (Russia)

    266. 

    Joint Stock Company Yaroslav Radio Factory (Russia)

    267. 

    Joint Stock Company Zlatoustovsky Machine Building Plant (JSC Zlatmash) (Russia)

    268. 

    Limited Liability Company Center for Specialized Production OSK Propulsion (OSK Propulsion) (Russia)

    269. 

    Lytkarino Machine-Building Plant (Russia)

    270. 

    Moscow Aviation Institute (Russia)

    271. 

    Moscow Institute of Thermal Technology (Russia)

    272. 

    Omsk Motor-Manufacturing Design Bureau (Russia)

    273. 

    Open Joint Stock Company 170 Flight Support Equipment Repair Plant (170 RZ SOP) (Russia)

    274. 

    Open Joint Stock Company 20 Aviation Repair Plant (20 ARZ) (Russia)

    275. 

    Open Joint Stock Company 275 Aviation Repair Plant (275 ARZ) (Russia)

    276. 

    Open Joint Stock Company 308 Aviation Repair Plant (308 ARZ) (Russia)

    277. 

    Open Joint Stock Company 32 Repair Plant of Flight Support Equipment (32 RZ SOP) (Russia)

    278. 

    Open Joint Stock Company 322 Aviation Repair Plant (322 ARZ) (Russia)

    279. 

    Open Joint Stock Company 325 Aviation Repair Plant (325 ARZ) (Russia)

    280. 

    Open Joint Stock Company 680 Aircraft Repair Plant (680 ARZ) (Russia)

    281. 

    Open Joint Stock Company 720 Special Flight Support Equipment Repair Plant (720 RZ SOP) (Russia)

    282. 

    Open Joint Stock Company Volgograd Radio-Technical Equipment Plant (VZ RTO) (Russia)

    283. 

    Public Joint Stock Company Agregat (PJSC Agregat) (Russia)

    284. 

    Salute Gas Turbine Research and Production Center (Russia)

    285. 

    Scientific-Production Association Vint of Zvezdochka Shipyard (SPU Vint) (Russia)

    286. 

    Scientific Research Institute of Applied Acoustics (NIIPA) (Russia)

    287. 

    Siberian Scientific-Research Institute of Aviation N.A. S.A. Chaplygin (SibNIA) (Russia)

    288. 

    Software Research Institute (Russia)

    289. 

    Subsidiary Sevastopol Naval Plant of Zvezdochka Shipyard (Sevastopol Naval Plant) (City of Sevastopol, illegally annexed by Russia)

    290. 

    Tula Arms Plant (Russia)

    291. 

    Russian Institute of Radio Navigation and Time (Russia)

    292. 

    Federal Technical Regulation and Metrology Agency (Rosstandart) (Russia)

    293. 

    Federal State Budgetary Institution of Science P.I. K.A. Valiev RAS of the Ministry of Science and Higher Education of Russia (FTIAN) (Russia)

    294. 

    Federal State Unitary Enterprise All-Russian Research Institute of Physical, Technical and Radio Engineering Measurements (VNIIFTRI) (Russia)

    295. 

    Institute of Physics Named After P.N. Lebedev of the Russian Academy of Sciences (LPI) (Russia)

    296. 

    The Institute of Solid-State Physics of the Russian Academy of Sciences (ISSP) (Russia)

    297. 

    Rzhanov Institute of Semiconductor Physics, Siberian Branch of Russian Academy of Sciences (IPP SB RAS) (Russia)

    298. 

    UEC-Perm Engines, JSC (Russia)

    299. 

    Ural Works of Civil Aviation, JSC (Russia)

    300. 

    Central Design Bureau for Marine Engineering ‘Rubin’, JSC (Russia)

    301. 

    ‘Aeropribor-Voskhod’, JSC (Russia)

    302. 

    Aerospace Equipment Corporation, JSC (Russia)

    303. 

    Central Research Institute of Automation and Hydraulics (CNIIAG), JSC (Russia)

    304. 

    Aerospace Systems Design Bureau, JSC (Russia)

    305. 

    Afanasyev Technomac, JSC (Russia)

    306. 

    Ak Bars Shipbuilding Corporation, CJSC (Russia)

    307. 

    AGAT, Gavrilov-Yaminskiy Machine-Building Plant, JSC (Russia)

    308. 

    Almaz Central Marine Design Bureau, JSC (Russia)

    309. 

    Joint Stock Company Eleron (Russia)

    310. 

    AO Rubin (Russia)

    311. 

    Branch of AO Company Sukhoi Yuri Gagarin Komsomolsk-on-Amur Aircraft Plant (Russia)

    312. 

    Branch of PAO II – Aviastar (Russia)

    313. 

    Branch of RSK MiG Nizhny Novgorod Aircraft-Construction Plant Sokol (Russia)

    314. 

    Chkalov Novosibirsk Aviation Plant (Russia)

    315. 

    Joint Stock Company All-Russian Scientific-Research Institute Gradient (Russia)

    316. 

    Joint Stock Company Almatyevsk Radiopribor Plant (JSC AZRP) (Russia)

    317. 

    Joint Stock Company Experimental-Design Bureau Elektroavtomatika in the name of P.A. Efimov (Russia)

    318. 

    Joint Stock Company Industrial Controls Design Bureau (Russia)

    319. 

    Joint Stock Company Kazan Instrument-Engineering and Design Bureau (Russia)

    320. 

    Joint Stok Company Microtechnology (Russia)

    321. 

    Phasotron Scientific-Research Institute of Radio-Engineering (Russia)

    322. 

    Joint Stock Company Radiopribor (Russia)

    323. 

    Joint Stock Company Ramensk Instrument-Engineering Bureau (Russia)

    324. 

    Joint Stock Company Research and Production Center SAPSAN (Russia)

    325. 

    Joint Stock Company Rychag (Russia)

    326. 

    Joint Stock Company Scientific Production Enterprise Izmeritel (Russia)

    327. 

    Joint Stock Company Scientific-Production Union for Radioelectronics Named After V.I. Shimko (Russia)

    328. 

    Joint Stock Company Taganrog Communications Scientific-Research Institute (Russia)

    329. 

    Joint Stock Company Urals Instrument-Engineering Plant (Russia)

    330. 

    Joint Stock Company Vzlet Engineering Testing Support (Russia)

    331. 

    Joint Stock Company Zhiguli Radio Plant (Russia)

    332. 

    Joint Stock Company Bryansk Electromechanical Plant (Russia)

    333. 

    Public Joint Stock Company Moscow Institute of Electro-Mechanics and Automation (Russia)

    334. 

    Public Joint Stock Company Stavropol Radio Plant Signal (Russia)

    335. 

    Public Joint Stock Company Techpribor (Russia)

    336. 

    Joint Stock Company Ramensky Instrument-Engineering Plant (Russia)

    337. 

    V.V. Tarasov Avia Avtomatika (Russia)

    338. 

    Design Bureau of Chemical Machine Building KBKhM (Russia)

    339. 

    Far Eastern Shipbuilding and Ship Repair Center (Russia)

    340. 

    Ilyushin Aviation Complex Branch: Myasishcheva Experimental Mechanical Engineering Plant (Russia)

    341. 

    Institute of Marine Technology Problems Far East Branch Russian Academy of Sciences (Russia)

    342. 

    Irkutsk Aviation Plant (Russia)

    343. 

    Joint Stock Company Aerocomposit Ulyanovsk Plant (Russia)

    344. 

    Joint Stock Company Experimental Design Bureau Named After A.S. Yakovlev (Russia)

    345. 

    Joint Stock Company Federal Research and Production Center Altai (Russia)

    346. 

    Joint Stock Company ‘Head Special Design Bureau Prozhektor’ (Russia)

    347. 

    Joint Stock Company Ilyushin Aviation Complex (Russia)

    348. 

    Joint Stock Company Lazurit Central Design Bureau (Russia)

    349. 

    Joint Stock Company Research and Development Enterprise Protek (Russia)

    350. 

    Joint Stock Company SPMDB Malachite (Russia)

    351. 

    Joint Stock Company Votkinsky Zavod (Russia)

    352. 

    Kalyazinsky Machine Building Factory – Branch of RSK MiG (Russia)

    353. 

    Main Directorate of Deep-Sea Research of the Ministry of Defense of the Russian Federation (Russia)

    354. 

    NPP Start (Russia)

    355. 

    OAO Radiofizika (Russia)

    356. 

    P.A. Voronin Lukhovitsk Aviation Plant, branch of RSK MiG (Russia)

    357. 

    Public Joint Stock Company Bryansk Special Design Bureau (Russia)

    358. 

    Public Joint Stock Company Voronezh Joint Stock Aircraft Company (Russia)

    359. 

    Radio Technical Institute Named After A. L. Mints (Russia)

    360. 

    Russian Federal Nuclear Center – All-Russian Research Institute of Experimental Physics (Russia)

    361. 

    Shvabe JSC (Russia)

    362. 

    Special Technological Center LLC (Russia)

    363. 

    St. Petersburg Marine Bureau of Machine Building Malakhit (Russia)

    364. 

    St. Petersburg Naval Design Bureau Almaz (Russia)

    365. 

    St. Petersburg Shipbuilding Institution Krylov 45 (Russia)

    366. 

    Strategic Control Posts Corporation (Russia)

    367. 

    V.A. Trapeznikov Institute of Control Sciences of Russian Academy of Sciences (Russia)

    368. 

    Vladimir Design Bureau for Radio Communications OJSC (Russia)

    369. 

    Voentelecom JSC (Russia)

    370. 

    A.A. Kharkevich Institute for Information Transmission Problems (IITP), Russian Academy of Sciences (RAS) (Russia)

    371. 

    Ak Bars Holding (Russia)

    372. 

    Special Research Bureau for Automation of Marine Researches Far East Branch Russian Academy of Sciences (Russia)

    373. 

    Systems of Biological Synthesis LLC (Russia)

    374. 

    Borisfen, JSC (Russia)

    375. 

    Barnaul cartridge plant, JSC (Russia)

    376. 

    Concern Avrora Scientific and Production Association, JSC (Russia)

    377. 

    Bryansk Automobile Plant, JSC (Russia)

    378. 

    Burevestnik Central Research Institute, JSC (Russia)

    379. 

    Research Institute of Space Instrumentation, JSC (Russia)

    380. 

    Arsenal Machine-building plant, OJSC (Russia)

    381. 

    Central Design Bureau of Automatics, JSC (Russia)

    382. 

    Zelenodolsk Design Bureau, JSC (Russia)

    383. 

    Zavod Elecon, JSC (Russia)

    384. 

    VMP ‘Avitec’, JSC (Russia)

    385. 

    JSC V. Tikhomirov Scientific Research Institute of Instrument Design (Russia)

    386. 

    Tulatochmash, JSC (Russia)

    387. 

    PJSC ‘I.S. Brook’ INEUM (Russia)

    388. 

    SPE ‘Krasnoznamenets’, JSC (Russia)

    389. 

    SPA Pribor Named After S.S. Golembiovsky, SC (Russia)

    390. 

    SPA ‘Impuls’, JSC (Russia)

    391. 

    RusBITech (Russia)

    392. 

    ROTOR 43 (Russia)

    393. 

    Rostov optical and mechanical plant, PJSC (Russia)

    394. 

    RATEP, JSC (Russia)

    395. 

    PLAZ (Russia)

    396. 

    OKB ‘Technika’ (Russia)

    397. 

    Ocean Chips (Russia)

    398. 

    Nudelman Precision Engineering Design Bureau (Russia)

    399. 

    Angstrem JSC (Russia)

    400. 

    NPCAP (Russia)

    401. 

    Novosibirsk Plant of Artificial Fibre (Russia)

    402. 

    Novosibirsk Cartridge Plant, JSC (SIBFIRE) (Russia)

    403. 

    Novator DB (Russia)

    404. 

    NIMI Named After V.V. BAHIREV, JSC (Russia)

    405. 

    NII Stali JSC (Russia)

    406. 

    Nevskoe Design Bureau, JSC (Russia)

    407. 

    Neva Electronica JSC (Russia)

    408. 

    ENICS (Russia)

    409. 

    The JSC Makeyev Design Bureau (Russia)

    410. 

    KURGANPRIBOR, JSC (Russia)

    411. 

    Ural Optical-Mechanical Plant E.S. Yalamova, JSC (Russia)

    412. 

    Ramenskoye Engineering Design Office, JSC (Russia)

    413. 

    Vologda Optical and Mechanical Plant, JSC (Russia)

    414. 

    Videoglaz Project (Russia)

    415. 

    Innovative Underwater Technologies, LLC (Russia)

    416. 

    Ulyanovsk Mechanical Plant (Russia)

    417. 

    All-Russian Research Institute of Radio Engineering (Russia)

    418. 

    PJSC ‘Scientific and Production Association “Almaz” Named After Academician A.A. Raspletin’ (Russia)

    419. 

    Concern OJSC – KIZLYAR ELECTRO-MECHANICAL PLANT (Russia)

    420. 

    Concern Oceanpribor, JSC (Russia)

    421. 

    JSC Zelenogradsky Nanotechnology Center (Russia)

    422. 

    JSC Elektronstandart Pribor (Russia)

    423. 

    JSC ‘Urals Optical-Mechanical Plant Named After Mr E.S Yalamov’ (Russia)

    424. 

    Ramenskoye Instrument-Making Design Bureau, JSC (Russia)

    425. 

    Special Technology Centre Limited Liability Company (Russia)

    426. 

    Vest Ost Limited Liability (Russia)

    427. 

    Trade-Component LLC (Russia)

    428. 

    Radiant Electronic Components JSC (Russia)

    429. 

    JSC ICC Milandr (Russia)

    430. 

    SMT iLogic LLC (Russia)

    431. 

    Device Consulting (Russia)

    432. 

    Concern Radio-Electronic Technologies (Russia)

    433. 

    Technodinamika, JSC (Russia)

    434. 

    OOO ‘UNITEK’ (Russia)

    435. 

    Closed Joint Stock Company TPK LINKOS (Russia)

    436. 

    Closed Joint Stock Company TPK LINKOS, SUBDIVISION IN ASTRAKHAN (Russia)

    437. 

    Design and Manufacturing of Aircraft Engines (DAMA) (Iran)

    438. 

    Islamic Revolutionary Guard Corps Aerospace Force (Iran)

    439. 

    Islamic Revolutionary Guard Corps Research and Self-Sufficiency Jihad Organization (IRGC SSJO) (Iran)

    440. 

    Oje Parvaz Mado Nafar Company (Mado) (Iran)

    441. 

    Paravar Pars Company (Iran)

    442. 

    Qods Aviation Industries (Iran)

    443. 

    Shahed Aviation Industries (Iran)

    444. 

    Concern Morinformsystem–Agat (Russia)

    445. 

    AO Papilon (Russia)

    446. 

    IT-Papillon OOO (Russia)

    447. 

    OOO Adis (Russia)

    448. 

    Papilon Systems Limited Liability Company (Russia)

    449. 

    Advanced Research Foundation (Russia)

    450. 

    Federal Service for Military-Technical Cooperation (Russia)

    451. 

    Federal State Budgetary Scientific Institution Research and Production Complex Technology Center (Russia)

    452. 

    Federal State Institution Federal Scientific Center Scientific Research Institute for System Analysis of the Russian Academy of Sciences (Russia)

    453. 

    Joint Stock Company All-Russian Research Institute Signal (Russia)

    454. 

    Joint Stock Company Center of Research and Technology Services Dinamika (Russia)

    455. 

    Joint Stock Company Concern Avtomatika (Russia)

    456. 

    Joint Stock Company Corporation Moscow Institute of Heat Technology (Russia)

    457. 

    Joint Stock Company Design Center Soyuz (Russia)

    458. 

    Joint Stock Company Design Technology Center Elektronika (Russia)

    459. 

    Joint Stock Company Institute for Scientific Research Microelectronic Equipment Progress (Russia)

    460. 

    Joint Stock Company Machine-Building Engineering Office Fakel Named After Akademika P.D. Grushina (Russia)

    461. 

    Joint Stock Company Moscow Institute of Electromechanics and Automatics (Russia)

    462. 

    Joint Stock Company North Western Regional Center of Almaz Antey Concern Obukhovsky Plant (Russia)

    463. 

    Joint Stock Company Obninsk Research and Production Enterprise Technologiya Named After A.G. Romashin (Russia)

    464. 

    Joint Stock Company Penza Electrotechnical Research Institute (Russia)

    465. 

    Joint Stock Company Production Association Sever (Russia)

    466. 

    Joint Stock Company Research Center ELINS (Russia)

    467. 

    Joint Stock Company Research and Production Association of Measuring Equipment (Russia)

    468. 

    Joint Stock Company Research and Production Enterprise Radar MMS (Russia)

    469. 

    Joint Stock Company Research and Production Enterprise Sapfir (Russia)

    470. 

    Joint Stock Company RT-Tekhpriemka (Russia)

    471. 

    Joint Stock Company Russian Research Institute Electronstandart (Russia)

    472. 

    Joint Stock Company Ryazan Plant of Metal Ceramic Instruments (Russia)

    473. 

    Joint Stock Company Scientific Production Enterprise Digital Solutions (Russia)

    474. 

    Joint Stock Company Scientific Production Enterprise Kontakt (Russia)

    475. 

    Joint Stock Company Scientific Production Enterprise Topaz (Russia)

    476. 

    Joint Stock Company Scientific Research Institute Giricond (Russia)

    477. 

    Joint Stock Company Scientific Research Institute of Computer Engineering NII SVT (Russia)

    478. 

    Joint Stock Company Scientific Research Institute of Electrical Carbon Products (Russia)

    479. 

    Joint Stock Company Scientific Research Institute of Electronic and Mechanical Devices (Russia)

    480. 

    Joint Stock Company Scientific Research Institute of Electronic Engineering Materials (Russia)

    481. 

    Joint Stock Company Scientific Research Institute of Gas Discharge Devices Plasma (Russia)

    482. 

    Joint Stock Company Scientific Research Institute of Industrial Television Rastr (Russia)

    483. 

    Joint Stock Company Scientific Research Institute of Precision Mechanical Engineering (Russia)

    484. 

    Joint Stock Company Special Design Bureau of Computer Engineering (Russia)

    485. 

    Joint Stock Company Special Design Bureau of Control Means (Russia)

    486. 

    Joint Stock Company Special Design Bureau Turbina (Russia)

    487. 

    Joint Stock Company State Scientific Research Institute Kristall (Russia)

    488. 

    Joint Stock Company Svetlana Semiconductors (Russia)

    489. 

    Joint Stock Company Tekhnodinamika (Russia)

    490. 

    Joint Stock Company Voronezh Semiconductor Devices Factory Assembly (Russia)

    491. 

    KAMAZ Publicly Traded Company (Russia)

    492. 

    Keldysh Institute of Applied Mathematics of the Russian Academy of Sciences (Russia)

    493. 

    Limited Liability Company Research and Production Association Radiovolna (Russia)

    494. 

    Limited Liability Company RSBGroup (Russia)

    495. 

    Mitishinskiy Scientific Research Institute of Radio Measuring Instruments (Russia)

    496. 

    Open Joint Stock Company Khabarovsk Radio Engineering Plant (Russia)

    497. 

    Open Joint Stock Company Mariyskiy Machine-Building Plant (Russia)

    498. 

    Open Joint Stock Company Scientific and Production Enterprise Pulsar (Russia)

    499. 

    Public Joint Stock Company Megafon (Russia)

    500. 

    Public Joint Stock Company Tutaev Motor Plant (Russia)

    501. 

    Public Joint Stock Company Vympel Interstate Corporation (Russia)

    502. 

    RT-Inform Limited Liability Company (Russia)

    503. 

    Skolkovo Foundation (Russia)

    504. 

    Skolkovo Institute of Science and Technology (Russia)

    505. 

    State Flight Testing Center Named After V.P. Chkalov (Russia)

    506. 

    Joint Stock Company Research and Production Association Named After S.A. Lavochkina (Russia)

    507. 

    VMK Limited Liability Company (Russia)

    508. 

    TESTKOMPLEKT LLC (Russia)

    509. 

    Radiopriborsnab LLC (Russia)

    510. 

    CJSC Radiotekhkomplekt (Russia)

    511. 

    Asia Pacific Links Ltd. (Hong Kong, China)

    512. 

    Tordan Industry Limited (Hong Kong, China)

    513. 

    Alpha Trading Investments Limited (Hong Kong, China)

    514. 

    JSC NICEVT (Russia)

    515. 

    A-CONTRAKT (Russia)

    516. 

    JCS Izhevsk Motozavod Axion-holding (Russia)

    517. 

    Gorky Plant of Communication Equipment (GZAS) (Russia)

    518. 

    Nizhny Novgorod Research Institute of Radio Engineering (NNIIRT) (Russia)

    519. 

    Nizhegorodskiy televizionnyy zavod (NITEL JSC) (Russia)

    520. 

    LLC Rezonit (Russia)

    521. 

    ZAO Promelektronika (Russia)

    522. 

    TD Promelektronika LLC (Russia)

    523. 

    Tako LLC (Armenia)

    524. 

    Art Logistics LLC (Russia)

    525. 

    GFK Logistics LLC (Russia)

    526. 

    Novastream Limited (Russia)

    527. 

    SKS Elektron Broker (Russia)

    528. 

    Trust Logistics (Russia)

    529. 

    Trust Logistics LLC (Russia)

    530. 

    Alfa Beta Creative LLC (Uzbekistan)

    531. 

    GFK Logistics Asia LLC (Uzbekistan)

    532. 

    I Jet Global DMCC (Syria)

    533. 

    I Jet Global DMCC (United Arab Emirates)

    534. 

    Success Aviation Services FZC (United Arab Emirates)

    535. 

    LLC CST (Zala Aero Group) (Russia)

    536. 

    Iran Aircraft Manufacturing Industries Corporation (HESA) (Iran)

    537. 

    Closed Joint Stock Company Special Design Bureau (Russia)

    538. 

    Federal State Enterprise Kazan State Gunpowder Plant (Russia)

    539. 

    Federal State Unitary Enterprise Central Scientific Research Institute of Chemistry and Mechanics (Russia)

    540. 

    Federal State Unitary Enterprise Rostov-On-Don Research Institute of Radio Communications (Russia)

    541. 

    Informtest Firm Limited Liability Company (Russia)

    542. 

    Joint Stock Company 150 Aircraft Repair Plant (Russia)

    543. 

    Joint Stock Company 810 Aircraft Repair Plant (Russia)

    544. 

    Joint Stock Company Arzamas Instrument-Making Plant Named After P.I. Plandin (Russia)

    545. 

    Joint Stock Company Concern Central Institute for Scientific Research Elektropribor (Russia)

    546. 

    Joint Stock Company Dux (Russia)

    547. 

    Joint Stock Company Eastern Shipyard (Russia)

    548. 

    Joint Stock Company Information Satellite Systems Named After Academician M.F. Reshetnev (Russia)

    549. 

    Joint Stock Company Izhevsk Electromechanical Plant Kupol (Russia)

    550. 

    Joint Stock Company Kazan Optical-Mechanical Plant (Russia)

    551. 

    Joint Stock Company Khabarovsk Shipbuilding Yard (Russia)

    552. 

    Joint Stock Company Machine Building Company Vityaz (Russia)

    553. 

    Joint Stock Company Management Company Radiostandard (Russia)

    554. 

    Joint Stock Company Marine Instrument Engineering Corporation (Russia)

    555. 

    Joint Stock Company NII Gidrosvyazi Shtil (Russia)

    556. 

    Joint Stock Company Nizhny Novgorod Plant of the 70th Anniversary of Victory (Russia)

    557. 

    Joint Stock Company Northern Production Association Arktika (Russia)

    558. 

    Joint Stock Company Perm Machine Building Plant (Russia)

    559. 

    Joint Stock Company Production Complex Akhtuba (Russia)

    560. 

    Joint Stock Company Project Design Bureau RIO (Russia)

    561. 

    Joint Stock Company Scientific Production Association Orion (Russia)

    562. 

    Joint Stock Company Scientific Production Association Volna Plant (Russia)

    563. 

    Joint Stock Company Scientific Production Center of Automatics and Instrument Building Named After Academician N.A. Pilyugin (Russia)

    564. 

    Joint Stock Company Scientific Production Concern Tekhmash (Russia)

    565. 

    Joint Stock Company Scientific Research Engineering Institute (Russia)

    566. 

    Joint Stock Company Scientific Research Institute of Computing Complexes Named After M.A. Kartsev (Russia)

    567. 

    Joint Stock Company Scientific Technical Institute Radiosvyaz (Russia)

    568. 

    Joint Stock Company Taganrog Plant Priboy (Russia)

    569. 

    Joint Stock Company Tula Cartridge Works (Russia)

    570. 

    Joint Stock Company Tula Machine-Building Plant (Russia)

    571. 

    Joint Stock Company Ulan-Ude Aviation Plant (Russia)

    572. 

    Joint Stock Company Ulyanovsk Cartridge Works (Russia)

    573. 

    Joint Stock Company Ural Automotive Plant (Russia)

    574. 

    Joint Stock Company Vodtranspribor (Russia)

    575. 

    Joint Stock Company Zavolzhskiy Plant of Caterpillar Tractors (Russia)

    576. 

    Joint Stock Company Zelenodolsk Plant Named After A.M. Gorky (Russia)

    577. 

    Machine Building Group Limited Liability Company (Russia)

    578. 

    Military Industrial Company Limited Liability Company (Russia)

    579. 

    Open Joint Stock Company Degtyaryov Plant (Russia)

    580. 

    Promtekhnologiya Limited Liability Company (Russia)

    581. 

    Public Joint Stock Company Kurganmashzavod (Russia)

    582. 

    Public Joint Stock Company Motovilikha Plants (Russia)

    583. 

    Public Joint Stock Company Proletarsky Plant (Russia)

    584. 

    Public Joint Stock Company Rostvertol (Russia)

    585. 

    Scientific Production Association Izhevsk Unmanned Systems Limited Liability Company (Russia)

    586. 

    Scientific Production Enterprise Prima Limited Liability Company (Russia)

    587. 

    United Machine Building Group Limited Liability Company (Russia)

    588. 

    Volgograd Machine Building Company Limited Liability Company (Russia)

    589. 

    VXI-Systems Limited Liability Company (Russia)

    590. 

    LLC Yadro (Russia)

    591. 

    Perm Powder Plant (Russia)

    592. 

    RPA Kazan Machine Building Plant (Russia)

    593. 

    Proton JSC (Russia)

    594. 

    Grant Instrument (Russia)

    595. 

    Streloy (Russia)

    596. 

    LLC Research and Production Enterprise Itelma (Russia)

    597. 

    TTK Kammarket LLC (Russia)

    598. 

    JSC Kompel (Russia)

    599. 

    LLC MBR-AVIA (Russia)

    600. 

    LLC NeoTech (Russia)

    601. 

    JSC Sozvezdie Concern (Russia)

    602. 

    Serov Machine-Building Plant JSC (Russia)

    603. 

    Aeroscan LLC (Russia)

    604. 

    STC Orion LLC (Russia)

    605. 

    Technical Center Windeq LLC (Russia)

    606. 

    OrelMetallPolimer LLC (Russia)

    607. 

    OMP LLC (Russia)

    608. 

    Spetstehnotreyd LLC (Russia)

    609. 

    BIC-inform (Russia)

    610. 

    Spel LLC (Russia)

    611. 

    Alfakomponent LLC (Russia)

    612. 

    ID Solution LLC (Russia)

    613. 

    Inelso LLC (Russia)

    614. 

    Elitan Trade LLC (Russia)

    615. 

    Hartis Dv LLV (Russia)

    616. 

    SFT LLC (Russia)

    617. 

    Kami Group LLC (Russia)

    618. 

    AGT Systems LLC (Russia)

    619. 

    Entep LLC (Russia)

    620. 

    Mvizion LLC (Uzbekistan)

    621. 

    Design Bureau of Navigation Systems (NAVIS) (Russia)

    622. 

    Deflog Technologies PTE LTD (Singapore)

    623. 

    JSC VNIIR Progress (Russia)

    624. 

    Si2 Microsystems Pvt Ltd (India)

    625. 

    Spark TT (Russia)

    626. 

    Euro Asia Cargo (Private) Ltd. (Sri Lanka)

    627. 

    Ultran Electronic Components LLC (Russia)

    628. 

    RG Solutions Limited (Hong Kong, China)

    629. 

    JSC SEZ Alabuga (Russia)

    630. 

    LLC Alabuga Development (Russia)

    631. 

    AO Geomir (Russia)

    632. 

    OOO Albatross (Russia)

    633. 

    AO SET-1 (Russia)

    634. 

    OOO Alabuga Volokno (Russia)

    635. 

    SuperCam (Russia)

    636. 

    AviatestAero (Russia)

    637. 

    Conex Doo Beograd-Stari Grad (Serbia)

    638. 

    Guangzhou Ausay Technology Co Limited (China)

    639. 

    Shenzhen Biguang Trading Co. Ltd (China)

    640. 

    Yilufa Electronics Ltd. (China)

    641. 

    TOO Elem Group (Kazakhstan)

    642. 

    Thai IT Hardware Co., Ltd (Thailand)

    643. 

    Yildiz Çip Teknoloji Elektronik Elektrik Bilgisayar Malzemeleri Ticaret Sanayi Limited Sirketi (Türkiye)

    644. 

    LLC Fregat (Russia)

    645. 

    IC Specpostavka (Russia)

    646. 

    Nordlase LLC (Russia)

    647. 

    Leningrad Laser Systems (Russia)

    648. 

    LLS Mark (Russia)

    649. 

    OOO Staut (Russia)




    ▼M7

    ANNEX V

    List of legal persons, entities and bodies referred to in Article 5(3)(a)

    ▼M1

    OPK OBORONPROM
    UNITED AIRCRAFT CORPORATION
    URALVAGONZAVOD




    ▼M7

    ANNEX VI

    List of legal persons, entities and bodies referred to in Article 5(3)(b)

    ▼M1

    ROSNEFT
    TRANSNEFT
    GAZPROM NEFT

    ▼M26




    ANNEX VII

    List of goods and technology referred to in Articles 2a(1) and 2b(1)

    Part A

    General Notes, Acronyms and Abbreviations, and Definitions in Annex I to Regulation (EU) 2021/821 apply to this Annex, with the exception of ‘Part I – General Notes, Acronyms and Abbreviations, and Definitions, General Notes to Annex I, point 2’.

    Definitions of Terms used in the Common Military List (CML) of the European Union (2020/C 85/01) apply to this Annex.

    Without prejudice to Article 12 of this Regulation, non-controlled items containing one or more components listed in this Annex are not subject to the controls under Articles 2a and 2b of this Regulation.

    Category I – Electronics

    X.A.I.001 Electronic devices and components.

    a. 

    ‘Microprocessor microcircuits’, ‘microcomputer microcircuits’, and microcontroller microcircuits having any of the following:

    1. 

    A performance speed of 5 GigaFLOPS or more and an arithmetic logic unit with an access width of 32 bit or more;

    2. 

    A clock frequency rate exceeding 25 MHz; or

    3. 

    More than one data or instruction bus or serial communication port that provides a direct external interconnection between parallel ‘microprocessor microcircuits’ with a transfer rate of 2,5 Mbyte/s;

    b. 

    Storage integrated circuits, as follows:

    1. 

    Electrically erasable programmable read-only memories (EEPROMs) with a storage capacity;

    a. 

    Exceeding 16 Mbit per package for flash memory types; or

    b. 

    Exceeding either of the following limits for all other EEPROM types:

    1. 

    Exceeding 1 Mbit per package; or

    2. 

    Exceeding 256 kbit per package and a maximum access time of less than 80 ns;

    2. 

    Static random access memories (SRAMs) with a storage capacity:

    a. 

    Exceeding 1 Mbit per package; or

    b. 

    Exceeding 256 kbit per package and a maximum access time of less than 25 ns;

    c. 

    Analogue-to-digital converters having any of the following:

    1. 

    A resolution of 8 bit or more, but less than 12 bit, with an output rate greater than 200 Mega Samples Per Second (MSPS);

    2. 

    A resolution of 12 bit with an output rate greater than 105 Mega Samples per Second (MSPS);

    3. 

    A resolution of more than 12 bit but equal to or less than 14 bit with an output rate greater than 10 Mega Samples per Second (MSPS); or

    4. 

    A resolution of more than 14 bit with an output rate greater than 2,5 Mega Samples Per Second (MSPS);

    d. 

    Field programmable logic devices having a maximum number of single-ended digital input/outputs between 200 and 700;

    e. 

    Fast Fourier Transform (FFT) processors having a rated execution time for a 1 024 point complex FFT of less than 1 ms;

    f. 

    Custom integrated circuits for which the function is unknown, or the control status of the equipment in which the integrated circuits will be used is unknown to the manufacturer, having any of the following:

    1. 

    More than 144 terminals; or

    2. 

    A typical basic propagation delay time of less than 0,4 ns;

    g. 

    Traveling-wave ‘vacuum electronic devices’, pulsed or continuous wave, as follows:

    1. 

    Coupled cavity devices, or derivatives thereof;

    2. 

    Devices based on helix, folded waveguide, or serpentine waveguide circuits, or derivatives thereof, having any of the following:

    a. 

    An ‘instantaneous bandwidth’ of half an octave or more and average power (expressed in kW) times frequency (expressed in GHz) of more than 0,2; or

    b. 

    An ‘instantaneous bandwidth’ of less than half an octave; and average power (expressed in kW) times frequency (expressed in GHz) of more than 0,4;

    h. 

    Flexible waveguides designed for use at frequencies exceeding 40 GHz;

    i. 

    Surface acoustic wave and surface skimming (shallow bulk) acoustic wave devices, having either of the following:

    1. 

    A carrier frequency exceeding 1 GHz; or

    2. 

    A carrier frequency of 1 GHz or less; and

    a. 

    A ‘frequency side-lobe rejection’ exceeding 55 dB;

    b. 

    A product of the maximum delay time and bandwidth (time in μs and bandwidth in MHz) of more than 100; or

    c. 

    A dispersive delay of more than 10 μs;

    Technical Note : For the purpose of X.A.I.001.i ‘frequency side-lobe rejection’ is the maximum rejection value specified in data sheet.

    j. 

    ‘Cells’ as follows:

    1. 

    ‘Primary cells’ having an ‘energy density’ of 550 Wh/kg or less at 293 K (20 °C);

    2. 

    ‘Secondary cells’ having an ‘energy density’ of 350 Wh/kg or less at 293 K (20 °C);

    Note : X.A.I.001.j does not control batteries, including single cell batteries.

    Technical Notes :

    1.   For the purpose of X.A.I.001.j energy density (Wh/kg) is calculated from the nominal voltage multiplied by the nominal capacity in ampere-hours (Ah) divided by the mass in kilograms. If the nominal capacity is not stated, energy density is calculated from the nominal voltage squared then multiplied by the discharge duration in hours divided by the discharge load in Ohms and the mass in kilograms.

    2.   For the purpose of X.A.I.001.j, a ‘cell’ is defined as an electrochemical device, which has positive and negative electrodes, and electrolyte, and is a source of electrical energy. It is the basic building block of a battery.

    3.   For the purpose of X.A.I.001.j.1, a ‘primary cell’ is a ‘cell’ that is not designed to be charged by any other source.

    4.   For the purpose of X.A.I.001.j.2, a ‘secondary cell’ is a ‘cell’ that is designed to be charged by an external electrical source.

    k. 

    ‘Superconductive’ electromagnets or solenoids specially designed to be fully charged or discharged in less than one minute, having all of the following:

    Note : X.A.I.001.k does not control ‘superconductive’ electromagnets or solenoids designed for Magnetic Resonance Imaging (MRI) medical equipment.

    1. 

    Maximum energy delivered during the discharge divided by the duration of the discharge of more than 500 kJ per minute;

    2. 

    Inner diameter of the current carrying windings of more than 250 mm; and

    3. 

    Rated for a magnetic induction of more than 8T or ‘overall current density’ in the winding of more than 300 A/mm2;

    l. 

    Circuits or systems for electromagnetic energy storage, containing components manufactured from ‘superconductive’ materials specially designed for operation at temperatures below the ‘critical temperature’ of at least one of their ‘superconductive’ constituents, having all of the following:

    1. 

    Resonant operating frequencies exceeding 1 MHz;

    2. 

    A stored energy density of 1 MJ/m3 or more; and

    3. 

    A discharge time of less than 1 ms;

    m. 

    Hydrogen/hydrogen-isotope thyratrons of ceramic-metal construction and rate for a peak current of 500 A or more;

    n. 

    Ceramic frequency filters;

    o. 

    Solar cells, cell-interconnect-coverglass (CIC) assemblies, solar panels, and solar arrays, which are ‘space qualified’ and not controlled by 3A001.e.4 ( 37 );

    p. 

    Cermet trimmers.

    X.A.I.002 General purpose ‘electronic assemblies’, modules and equipment.

    a. 

    Electronic test equipment, other than those specified in the CML or in Regulation (EU) 2021/821;

    b. 

    Digital instrumentation magnetic tape data recorders having any of the following characteristics;

    1. 

    A maximum digital interface transfer rate exceeding 60 Mbit/s and employing helical scan techniques;

    2. 

    A maximum digital interface transfer rate exceeding 120 Mbit/s and employing fixed head techniques; or

    3. 

    ‘Space qualified’;

    c. 

    Equipment, with a maximum digital interface transfer rate exceeding 60 Mbit/s, designed to convert digital video magnetic tape recorders for use as digital instrumentation data recorders;

    d. 

    Non-modular analogue oscilloscopes having a bandwidth of 1 GHz or greater;

    e. 

    Modular analogue oscilloscope systems having either of the following characteristics:

    1. 

    A mainframe with a bandwidth of 1 GHz or greater; or

    2. 

    Plug-in modules with an individual bandwidth of 4 GHz or greater;

    f. 

    Analogue sampling oscilloscopes for the analysis of recurring phenomena with an effective bandwidth greater than 4 GHz;

    g. 

    Digital oscilloscopes and transient recorders, using analogue-to-digital conversion techniques, capable of storing transients by sequentially sampling single-shot inputs at successive intervals of less than 1 ns (greater than 1 Giga Samples per Second (GSPS)), digitizing to 8 bits or greater resolution and storing 256 or more samples.

    Note : X.A.I.002 controls the following specially designed components for analogue oscilloscopes:

    1.   Plug-in units;

    2.   External amplifiers;

    3.   Pre-amplifiers;

    4.   Sampling devices;

    5.   Cathode ray tubes.

    X.A.I.003 Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows:

    a. 

    Frequency changers and their specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821;

    b. 

    Mass spectrometers, other than those specified in the CML or in Regulation (EU) 2021/821;

    c. 

    All flash X-ray machines, or components of pulsed power systems designed thereof, including Marx generators, high power pulse shaping networks, high voltage capacitors, and triggers;

    d. 

    Pulse amplifiers, other than those specified in the CML or in Regulation (EU) 2021/821;

    e. 

    Electronic equipment for time delay generation or time interval measurement, as follows:

    1. 

    Digital time delay generators with a resolution of 50 ns or less over time intervals of 1 μs or greater; or

    2. 

    Multi-channel (three or more) or modular time interval meter and chronometry equipment with resolution of 50 ns or less over time intervals of 1 μs or greater;

    f. 

    Chromatography and spectrometry analytical instruments.

    X.B.I.001 Equipment for the manufacture of electronic components or materials, as follows and specially designed components and accessories therefor:

    a. 

    Equipment specially designed for the manufacture of electron tubes, optical elements and specially designed components therefor controlled by 3A001 ( 38 ) or X.A.I.001;

    b. 

    Equipment specially designed for the manufacture of semiconductor devices, integrated circuits and ‘electronic assemblies’, as follows, and systems incorporating or having the characteristics of such equipment:

    Note : X.B.I.001.b. also controls equipment used or modified for use in the manufacture of other devices, such as imaging devices, electro-optical devices, acoustic-wave devices.

    1. 

    Equipment for the processing of materials for the manufacture of devices and components as specified in the heading of X.B.I.001.b, as follows:

    Note : X.B.I.001 does not control quartz furnace tubes, furnace liners, paddles, boats (except specially designed caged boats), bubblers, cassettes or crucibles specially designed for the processing equipment controlled by X.B.I.001.b.1.

    a. 

    Equipment for producing polycrystalline silicon and materials controlled by 3C001 ( 39 );

    b. 

    Equipment specially designed for purifying or processing III/V and II/VI semiconductor materials controlled by 3C001, 3C002, 3C003, 3C004, or 3C005 (39)  except crystal pullers, for which see X.B.I.001.b.1.c below;

    c. 

    Crystal pullers and furnaces, as follows:

    Note : X.B.I.001.b.1.c does not control diffusion and oxidation furnaces.

    1. 

    Annealing or recrystallizing equipment other than constant temperature furnaces employing high rates of energy transfer capable of processing wafers at a rate exceeding 0,005 m2 per minute;

    2. 

    ‘Stored program controlled’ crystal pullers having any of the following characteristics:

    a. 

    Rechargeable without replacing the crucible container;

    b. 

    Capable of operation at pressures above 2,5 x 105 Pa; or

    c. 

    Capable of pulling crystals of a diameter exceeding 100 mm;

    d. 

    ‘Stored program controlled’ equipment for epitaxial growth having any of the following characteristics:

    1. 

    Capable of producing silicon layer with a thickness uniform to less than ± 2,5 % across a distance of 200 mm or more;

    2. 

    Capable of producing a layer of any material other than silicon with a thickness uniformity across the wafer of equal to or better than ± 3,5 %; or

    3. 

    Rotation of individual wafers during processing;

    e. 

    Molecular beam epitaxial growth equipment;

    f. 

    Magnetically enhanced ‘sputtering’ equipment with specially designed integral load locks capable of transferring wafers in an isolated vacuum environment;

    g. 

    Equipment specially designed for ion implantation, ion-enhanced or photo-enhanced diffusion, having any of the following characteristics:

    1. 

    Patterning capability;

    2. 

    Beam energy (accelerating voltage) exceeding 200 keV;

    3. 

    Optimised to operate at a beam energy (accelerating voltage) of less than 10 keV; or

    4. 

    Capable of high energy oxygen implant into a heated ‘substrate’;

    h. 

    ‘Stored program controlled’ equipment for the selective removal (etching) by means of anisotropic dry methods (e.g., plasma), as follows:

    1. 

    ‘Batch types’ having either of the following:

    a. 

    End-point detection, other than optical emission spectroscopy types; or

    b. 

    Reactor operational (etching) pressure of 26,66 Pa or less;

    2. 

    ‘Single wafer types’ having any of the following:

    a. 

    End-point detection, other than optical emission spectroscopy types;

    b. 

    Reactor operational (etching) pressure of 26,66 Pa or less; or

    c. 

    Cassette-to-cassette and load locks wafer handling;

    Notes:

    1.   ‘Batch types’ refers to machines not specially designed for production processing of single wafers. Such machines can process two or more wafers simultaneously with common process parameters, e.g., RF power, temperature, etch gas species, flow rates.

    2.   ‘Single wafer types’ refers to machines specially designed for production processing of single wafers. These machines may use automatic wafer handling techniques to load a single wafer into the equipment for processing. The definition includes equipment that can load and process several wafers but where the etching parameters, e.g., RF power or end point, can be independently determined for each individual wafer.

    i. 

    Chemical vapour deposition (CVD) equipment, e.g., plasma-enhanced CVD (PECVD) or photo-enhanced CVD, for semiconductor device manufacturing, having either of the following capabilities, for deposition of oxides, nitrides, metals or polysilicon:

    1. 

    Chemical vapour deposition equipment operating below 105 Pa; or

    2. 

    PECVD equipment operating either below 60 Pa or having automatic cassette-to-cassette and load lock wafer handling;

    Note : X.B.I.001.b.1.i does not control low pressure chemical vapour deposition (LPCVD) systems or reactive ‘sputtering’ equipment.

    j. 

    Electron beam systems specially designed or modified for mask making or semiconductor device processing having any of the following characteristics:

    1. 

    Electrostatic beam deflection;

    2. 

    Shaped, non-Gaussian beam profile;

    3. 

    Digital-to-analogue conversion rate exceeding 3 MHz;

    4. 

    Digital-to-analogue conversion accuracy exceeding 12 bit; or

    5. 

    Target-to-beam position feedback control precision of 1 μm or finer;

    Note : X.B.I.001.b.1.j does not control electron beam deposition systems or general purpose scanning electron microscopes.

    k. 

    Surface finishing equipment for the processing of semiconductor wafers as follows:

    1. 

    Specially designed equipment for backside processing of wafers thinner than 100 μm and the subsequent separation thereof; or

    2. 

    Specially designed equipment for achieving a surface roughness of the active surface of a processed wafer with a two-sigma value of 2 μm or less, total indicator reading (TIR);

    Note : X.B.I.001.b.1.k does not control single-side lapping and polishing equipment for wafer surface finishing.

    l. 

    Interconnection equipment which includes common single or multiple vacuum chambers specially designed to permit the integration of any equipment controlled by X.B.I.001 into a complete system;

    m. 

    ‘Stored program controlled’ equipment using ‘lasers’ for the repair or trimming of ‘monolithic integrated circuits’ with either of the following characteristics:

    1. 

    Positioning accuracy less than ± 1 μm; or

    2. 

    Spot size (kerf width) less than 3 μm.

    Technical Note : For the purpose of X.B.I.001.b.1, ‘sputtering’ is an overlay coating process wherein positively charged ions are accelerated by an electric field towards the surface of a target (coating material). The kinetic energy of the impacting ions is sufficient to cause target surface atoms to be released and deposited on the substrate. ( Note : Triode, magnetron or radio frequency sputtering to increase adhesion of coating and rate of deposition are ordinary modifications of the process.).

    2. 

    Masks, mask substrates, mask-making equipment and image transfer equipment for the manufacture of devices and components as specified in the heading of X.B.I.001, as follows:

    Note : The term masks refers to those used in electron beam lithography, X-ray lithography, and ultraviolet lithography, as well as the usual ultraviolet and visible photo-lithography.

    a. 

    Finished masks, reticles and designs therefor, except:

    1. 

    Finished masks or reticles for the production of integrated circuits not controlled by 3A001 ( 40 ); or

    2. 

    Masks or reticles, having both of the following characteristics:

    a. 

    Their design is based on geometries of 2,5 μm or more; and

    b. 

    The design does not include special features to alter the intended use by means of production equipment or ‘software’;

    b. 

    Mask substrates as follows:

    1. 

    Hard surface (e.g., chromium, silicon, molybdenum) coated ‘substrates’ (e.g., glass, quartz, sapphire) for the preparation of masks having dimensions exceeding 125 mm x 125 mm; or

    2. 

    Substrates specially designed for X-ray masks;

    c. 

    Equipment, other than general purpose computers, specially designed for computer aided design (CAD) of semiconductor devices or integrated circuits;

    d. 

    Equipment or machines, as follows, for mask or reticle fabrication:

    1. 

    Photo-optical step and repeat cameras capable of producing arrays larger than 100 mm x 100 mm, or capable of producing a single exposure larger than 6 mm x 6 mm in the image (i.e., focal) plane, or capable of producing line widths of less than 2,5 μm in the photoresist on the ‘substrate’;

    2. 

    Mask or reticle fabrication equipment using ion or ‘laser’ beam lithography capable of producing line widths of less than 2,5 μm; or

    3. 

    Equipment or holders for altering masks or reticles or adding pellicles to remove defects;

    Note : X.B.I.001.b.2.d.1 and b.2.d.2 do not control mask fabrication equipment using photo-optical methods which was either commercially available before the 1st January 1980, or has a performance no better than such equipment.

    e. 

    ‘Stored program controlled’ equipment for the inspection of masks, reticles or pellicles with:

    1. 

    A resolution of 0,25 μm or finer; and

    2. 

    A precision of 0,75 μm or finer over a distance in one or two coordinates of 63,5 mm or more;

    Note : X.B.I.001.b.2.e does not control general purpose scanning electron microscopes except when specially designed and instrumented for automatic pattern inspection.

    f. 

    Align and expose equipment for wafer production using photo-optical or X-ray methods, e.g., lithography equipment, including both projection image transfer equipment and step and repeat (direct step on wafer) or step and scan (scanner) equipment, capable of performing any of the following functions:

    Note : X.B.I.001.b.2.f does not control photo-optical contact and proximity mask align and expose equipment or contact image transfer equipment.

    1. 

    Production of a pattern size of less than 2,5 μm;

    2. 

    Alignment with a precision finer than ± 0,25 μm (3 sigma);

    3. 

    Machine-to-machine overlay no better than ± 0,3 μm; or

    4. 

    A light source wavelength shorter than 400 nm;

    g. 

    Electron beam, ion beam or X-ray equipment for projection image transfer capable of producing patterns less than 2,5 μm;

    Note : For focused, deflected-beam systems (direct write systems), see X.B.I.001.b.1.j.

    h. 

    Equipment using ‘lasers’ for direct write on wafers capable of producing patterns less than 2,5 μm.

    3. 

    Equipment for the assembly of integrated circuits, as follows:

    a. 

    ‘Stored program controlled’ die bonders having all of the following characteristics:

    1. 

    Specially designed for ‘hybrid integrated circuits’;

    2. 

    X-Y stage positioning travel exceeding 37,5 x 37,5 mm; and

    3. 

    Placement accuracy in the X-Y plane of finer than ± 10 μm;

    b. 

    ‘Stored program controlled’ equipment for producing multiple bonds in a single operation (e.g., beam lead bonders, chip carrier bonders, tape bonders);

    c. 

    Semi-automatic or automatic hot cap sealers, in which the cap is heated locally to a higher temperature than the body of the package, specially designed for ceramic microcircuit packages controlled by 3A001 ( 41 ) and that have a throughput equal to or more than one package per minute.

    Note : X.B.I.001.b.3 does not control general purpose resistance type spot welders.

    4. 

    Filters for clean rooms capable of providing an air environment of 10 or less particles of 0,3 μm or smaller per 0,02832 m3 and filter materials therefor.

    Technical Note : For the purpose of X.B.I.001, ‘stored program controlled’ is a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions. Equipment may be ‘stored program controlled’ whether the electronic storage is internal or external to the equipment.

    X.B.I.002 Equipment for the inspection or testing of electronic components and materials, and specially designed components and accessories therefor.

    a. 

    Equipment specially designed for the inspection or testing of electron tubes, optical elements and specially designed components therefor controlled by 3A001 ( 42 ) or X.A.I.001;

    b. 

    Equipment specially designed for the inspection or testing of semiconductor devices, integrated circuits and ‘electronic assemblies’, as follows, and systems incorporating or having the characteristics of such equipment:

    Note : X.B.I.002.b also controls equipment used or modified for use in the inspection or testing of other devices, such as imaging devices, electro-optical devices, acoustic-wave devices.

    1. 

    ‘Stored program controlled’ inspection equipment for the automatic detection of defects, errors or contaminants of 0,6 μm or less in or on processed wafers, substrates, other than printed circuit boards or chips, using optical image acquisition techniques for pattern comparison;

    Note : X.B.I.002.b.1 does not control general purpose scanning electron microscopes, except when specially designed and instrumented for automatic pattern inspection.

    2. 

    Specially designed ‘stored program controlled’ measuring and analysis equipment, as follows:

    a. 

    Specially designed for the measurement of oxygen or carbon content in semiconductor materials;

    b. 

    Equipment for line width measurement with a resolution of 1 μm or finer;

    c. 

    Specially designed flatness measurement instruments capable of measuring deviations from flatness of 10 μm or less with a resolution of 1 μm or finer.

    3. 

    ‘Stored program controlled’ wafer probing equipment having any of the following characteristics:

    a. 

    Positioning accuracy finer than 3,5 μm;

    b. 

    Capable of testing devices having more than 68 terminals; or

    c. 

    Capable of testing at a frequency exceeding 1 GHz;

    4. 

    Test equipment as follows:

    a. 

    ‘Stored program controlled’ equipment specially designed for testing discrete semiconductor devices and unencapsulated dice, capable of testing at frequencies exceeding 18 GHz;

    Technical Note : Discrete semiconductor devices include photocells and solar cells.

    b. 

    ‘Stored program controlled’ equipment specially designed for testing integrated circuits and ‘electronic assemblies’ thereof, capable of functional testing:

    1. 

    At a ‘pattern rate’ exceeding 20 MHz; or

    2. 

    At a ‘pattern rate’ exceeding 10 MHz but not exceeding 20 MHz and capable of testing packages of more than 68 terminals.

    Notes : X.B.I.002.b.4.b does not control test equipment specially designed for testing:

    1.   Memories;

    2.   Assemblies or a class of ‘electronic assemblies’ for home and entertainment applications; and

    3.   Electronic components, ‘electronic assemblies’ and integrated circuits not controlled by 3A001 ( 43 )or X.A.I.001 provided such test equipment does not incorporate computing facilities with ‘user accessible programmability’.

    Technical Note : For purposes of X.B.I.002.b.4.b, ‘pattern rate’ is defined as the maximum frequency of digital operation of a tester. It is therefore equivalent to the highest data rate that a tester can provide in non-multiplexed mode. It is also referred to as test speed, maximum digital frequency or maximum digital speed.

    c. 

    Equipment specially designed for determining the performance of focal-plane arrays at wavelengths of more than 1 200 nm, using ‘stored program controlled’ measurements or computer aided evaluation and having any of the following characteristics:

    1. 

    Using scanning light spot diameters of less than 0,12 mm;

    2. 

    Designed for measuring photosensitive performance parameters and for evaluating frequency response, modulation transfer function, uniformity of responsivity or noise; or

    3. 

    Designed for evaluating arrays capable of creating images with more than 32 x 32 line elements;

    5. 

    Electron beam test systems designed for operation at 3 keV or below, or ‘laser’ beam systems, for non-contactive probing of powered-up semiconductor devices having any of the following:

    a. 

    Stroboscopic capability with either beam blanking or detector strobing;

    b. 

    An electron spectrometer for voltage measurements with a resolution of less than 0,5 V; or

    c. 

    Electrical tests fixtures for performance analysis of integrated circuits;

    Note : X.B.I.002.b.5 does not control scanning electron microscopes, except when specially designed and instrumented for non-contactive probing of a powered-up semiconductor device.

    6. 

    ‘Stored program controlled’ multifunctional focused ion beam systems specially designed for manufacturing, repairing, physical layout analysis and testing of masks or semiconductor devices and having either of the following characteristics:

    a. 

    Target-to-beam position feedback control precision of 1 μm or finer; or

    b. 

    Digital-to-analogue conversion accuracy exceeding 12 bit;

    7. 

    Particle measuring systems employing ‘lasers’ designed for measuring particle size and concentration in air having both of the following characteristics:

    a. 

    Capable of measuring particle sizes of 0,2 μm or less at a flow rate of 0,02832 m3 per minute or more; and

    b. 

    Capable of characterizing Class 10 clean air or better.

    Technical Note : For the purpose of X.B.I.002, ‘stored program controlled’ is a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions. Equipment may be ‘stored program controlled’ whether the electronic storage is internal or external to the equipment.

    X.B.I.003 Equipment for the manufacture of Printed Circuit Boards (PCBs) and specially designed components and accessories therefor, as follows:

    a. 

    Film processing equipment;

    b. 

    Solder mask coating equipment;

    c. 

    Photo plotter equipment;

    d. 

    Plating or electroplating deposition equipment;

    e. 

    Vacuum chambers and presses;

    f. 

    Roll laminators;

    g. 

    Alignment equipment; or

    h. 

    Etching equipment.

    X.B.I.004 Automated optical inspection equipment for testing Printed Circuit Boards (PCBs), based on optical or electrical sensors, and capable to detect any of the following quality defects:

    a. 

    Spacing, area, volume or height;

    b. 

    Bill boarding;

    c. 

    Components (presence, absence, flipped, offset, polarity, or skew);

    d. 

    Solder (bridging, insufficient solder joints);

    e. 

    Leads (insufficient paste, lifting);

    f. 

    Tombstoning; or

    g. 

    Electrical (shorts, opens, resistance, capacitance, power, grid performance).

    X.C.I.001 Positive resists designed for semiconductor lithography specially adjusted (optimised) for use at wavelengths between 370 and 193 nm.

    X.C.I.002 Chemicals and materials of the type used in the production of Printed Circuit Boards (PCBs), as follows:

    a. 

    PCB composite substrates made of glass fibre or cotton (e.g. FR-4, FR-2, FR 6, CEM-1, G-10, etc.);

    b. 

    Multilayer PCB substrates, containing at least one layer of any of the following materials:

    1. 

    Aluminium;

    2. 

    Polytetrafluoroethylene (PTFE); or

    3. 

    Ceramic materials (e.g. alumina, titanium oxide, etc.);

    c. 

    Etchant chemicals;

    1. 

    Ferric chloride (7705-08-0);

    2. 

    Cupric chloride (7447-39-4);

    3. 

    Ammonium persulphate (7727-54-0);

    4. 

    Sodium persulphate (7775-27-1); or

    5. 

    Chemical preparations specially designed for etching and containing any of the chemicals included in X.C.I.002.c.1 to X.C.I.002.c.4.

    Note : X.C.I.002.c does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entry X.C.I.002.c in which no individually specified chemical constitutes more than 10 % by the weight of the mixture.

    d. 

    Copper foil with a minimum purity 95 % and of a thickness less than 100 μm;

    e. 

    Polymeric substances and films thereof of less than 0,5 mm of thickness, as follows:

    1. 

    Aromatic polyimides;

    2. 

    Parylenes;

    3. 

    Benzocyclobutenes (BCBs); or

    4. 

    Polybenzoxazoles.

    X.D.I.001 ‘Software’ specially designed for the ‘development’, ‘production’, or ‘use’ of electronic devices or components controlled by X.A.I.001, general purpose electronic equipment controlled by X.A.I.002, or manufacturing and test equipment controlled by X.B.I.001 and X.B.I.002; or ‘software’ specially designed for the ‘use’ of equipment controlled by 3B001.g and 3B001.h ( 44 ).

    X.D.I.002 ‘Software’ specially designed for the test, ‘development’ or ‘production’ of Printed Circuit Boards (PCBs).

    X.E.I.001 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of electronic devices or components controlled by X.A.I.001, general purpose electronic equipment controlled by X.A.I.002, or manufacturing and test equipment controlled by X.B.I.001 or X.B.I.002, or materials controlled by X.C.I.001.

    X.E.I.002 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of Printed Circuit Boards (PCBs).

    Category II – Computers

    Note : Category II does not control goods for the personal use of the natural persons.

    X.A.II.001 Computers, ‘electronic assemblies’ and related equipment, not controlled by 4A001 or 4A003 (44) , and specially designed components therefor.

    Note : The control status of the ‘digital computers’ and related equipment described in X.A.II.001 is determined by the control status of other equipment or systems provided:

    a.   The ‘digital computers’ or related equipment are essential for the operation of the other equipment or systems;

    b.   The ‘digital computers’ or related equipment are not a ‘principal element’ of the other equipment or systems; and

    N.B.1 : The control status of ‘signal processing’ or ‘image enhancement’ equipment specially designed for other equipment with functions limited to those required for the other equipment is determined by the control status of the other equipment even if it exceeds the ‘principal element’ criterion.

    N.B.2 : For the control status of ‘digital computers’ or related equipment for telecommunications equipment, see Category 5, Part 1 (Telecommunications)  ( 45 ) .

    c.   The ‘technology’ for the ‘digital computers’ and related equipment is determined by 4E (45) .

    a. 

    Electronic computers and related equipment, and ‘electronic assemblies’ and specially designed components therefor, rated for operation at an ambient temperature above 343 K (70 °C);

    b. 

    ‘Digital computers’, including equipment of ‘signal processing’ or ‘image enhancement’, having an ‘Adjusted Peak Performance’ (‘APP’) equal to or greater than 0,0128 Weighted TeraFLOPS (WT);

    c. 

    ‘Electronic assemblies’ that are specially designed or modified to enhance performance by aggregation of processors, as follows:

    1. 

    Designed to be capable of aggregation in configurations of 16 or more processors;

    2. 

    Not used;

    Note 1: X.A.II.001.c applies only to ‘electronic assemblies’ and programmable interconnections with a ‘APP’ not exceeding the limits in X.A.II.001.b, when shipped as unintegrated ‘electronic assemblies’. It does not apply to ‘electronic assemblies’ inherently limited by nature of their design for use as related equipment controlled by X.A.II.001.k.

    Note 2: X.A.II.001.c does not control any ‘electronic assembly’ specially designed for a product or family of products whose maximum configuration does not exceed the limits of X.A.II.001.b.

    d. 

    Not used;

    e. 

    Not used;

    f. 

    Equipment for ‘signal processing’ or ‘image enhancement’ having an ‘Adjusted Peak Performance’ (‘APP’) equal to or greater than 0,0128 Weighted TeraFLOPS WT;

    g. 

    Not used;

    h. 

    Not used;

    i. 

    Equipment containing ‘terminal interface equipment’ exceeding the limits in X.A.III.101;

    Technical Note : For the purpose of X.A.II.001.i, ‘terminal interface equipment’ means equipment at which information enters or leaves the telecommunication system, e.g. telephone, data device, computer, etc.

    j. 

    Equipment specially designed to provide external interconnection of ‘digital computers’ or associated equipment that allows communications at data rates exceeding 80 Mbyte/s.

    Note : X.A.II.001.j does not control internal interconnection equipment (e.g., backplanes, buses) passive interconnection equipment, ‘network access controllers’ or ‘communication channel controllers’.

    Technical Note : For the purpose of X.A.II.001.j, ‘communication channel controllers’ is the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.

    k. 

    Hybrid computers and ‘electronic assemblies’ and specially designed components therefor containing analogue-to-digital converters having all of the following characteristics:

    1. 

    32 channels or more; and

    2. 

    A resolution of 14 bit (plus sign bit) or more with a conversion rate of 200 000  Hz or more.

    X.D.II.001 ‘Program’ proof and validation ‘software’, ‘software’ allowing the automatic generation of ‘source codes’, and operating system ‘software’ that are specially designed for ‘real-time processing’ equipment.

    a. 

    ‘Program’ proof and validation ‘software’ using mathematical and analytical techniques and designed or modified for ‘programs’ having more than 500 000 ‘source code’ instructions;

    b. 

    ‘Software’ allowing the automatic generation of ‘source codes’ from data acquired on line from external sensors described in the Regulation (EU) 2021/821; or

    c. 

    Operating system ‘software’ specially designed for ‘real-time processing’ equipment that guarantees a ‘global interrupt latency time’ of less than 20 μs.

    Technical Note : For the purpose of X.D.II.001, ‘global interrupt latency time’ is the time taken by the computer system to recognise an interrupt due to the event, service the interrupt and perform a context switch to an alternate memory-resident task waiting on the interrupt.

    X.D.II.002 ‘Software’ other than that controlled in 4D001 ( 46 ) specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment controlled by 4A101 (46) .

    X.E.II.001 ‘Technology’ for the‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.II.001, or ‘software’ controlled by X.D.II.001 or X.D.II.002.

    X.E.II.002 ‘Technology’ for the ‘development’ or ‘production’ of equipment designed for ‘multi-data-stream processing’.

    Technical Note : For the purpose of X.E.II.002, ‘multi-data-stream processing’ is a microprogram or equipment architecture technique that permits simultaneous processing of two or more data sequences under the control of one or more instruction sequences by means such as:

    1.   Single Instruction Multiple Data (SIMD) architectures such as vector or array processors;

    2.   Multiple Single Instruction Multiple Data (MSIMD) architectures;

    3.   Multiple Instruction Multiple Data (MIMD) architectures, including those that are tightly coupled, closely coupled or loosely coupled; or

    4.   Structured arrays of processing elements, including systolic arrays.

    Category III. Part 1 – Telecommunications

    Note : Category III. Part 1 does not control goods for the personal use of the natural persons.

    X.A.III.101 Telecommunication equipment.

    a. 

    Any type of telecommunications equipment, not controlled by 5A001.a ( 47 ), specially designed to operate outside the temperature range from 219 K (– 54 °C) to 397 K (124 °C).

    b. 

    Telecommunication transmission equipment and systems, and specially designed components and accessories therefor, having any of the following characteristics, functions or features:

    Note : Telecommunication transmission equipment:

    a.   Categorised as follows, or combinations thereof:

    1.   Radio equipment (e.g., transmitters, receivers and transceivers);

    2.   Line terminating equipment;

    3.   Intermediate amplifier equipment;

    4.   Repeater equipment;

    5.   Regenerator equipment;

    6.   Translation encoders (transcoders);

    7.   Multiplex equipment (statistical mutiplex included);

    8.   Modulators/demodulators (modems);

    9.   Transmultiplex equipment (see CCITT Rec. G701);

    10.   ‘Stored program controlled’ digital crossconnection equipment;

    11.   ‘Gateways’ and bridges;

    12.   ‘Media access units’; and

    b.   Designed for use in single or multi-channel communication via any of the following:

    1.   Wire (line);

    2.   Coaxial cable;

    3.   Optical fibre cable;

    4.   Electromagnetic radiation; or

    5.   Underwater acoustic wave propagation.

    1. 

    Employing digital techniques, including digital processing of analogue signals, and designed to operate at a ‘digital transfer rate’ at the highest multiplex level exceeding 45 Mbit/s or a ‘total digital transfer rate’ exceeding 90 Mbit/s;

    Note : X.A.III.101.b.1 does not control equipment specially designed to be integrated and operated in any satellite system for civil use.

    2. 

    Modems using the ‘bandwidth of one voice channel’ with a ‘data signalling rate’ exceeding 9 600  bits per second;

    3. 

    Being ‘stored program controlled’ digital cross connect equipment with ‘digital transfer rate’ exceeding 8,5 Mbit/s per port;

    4. 

    Being equipment containing any of the following:

    a. 

    ‘Network access controllers’ and their related common medium having a ‘digital transfer rate’ exceeding 33 Mbit/s; or

    b. 

    ‘Communication channel controllers’ with a digital output having a ‘data signalling rate’ exceeding 64 000 bit/s per channel;

    Note : If any uncontrolled equipment contains a ‘network access controller’, it cannot have any type of telecommunications interface, except those described in, but not controlled by X.A.III.101.b.4.

    5. 

    Employing a ‘laser’ and having any of the following characteristics:

    a. 

    A transmission wavelength exceeding 1 000 nm; or

    b. 

    Employing analogue techniques and having a bandwidth exceeding 45 MHz;

    c. 

    Employing coherent optical transmission or coherent optical detection techniques (also called optical heterodyne or homodyne techniques);

    d. 

    Employing wavelength division multiplexing techniques; or

    e. 

    Performing ‘optical amplification’;

    6. 

    Radio equipment operating at input or output frequencies exceeding:

    a. 

    31 GHz for satellite-earth station applications; or

    b. 

    26,5 GHz for other applications;

    Note : X.A.III.101.b.6 does not control equipment for civil use when conforming with an International Telecommunications Union (ITU) allocated band between 26,5 GHz and 31 GHz.

    7. 

    Being radio equipment employing any of the following:

    a. 

    Quadrature-amplitude-modulation (QAM) techniques above level 4 if the ‘total digital transfer rate’ exceeds 8,5 Mbit/s;

    b. 

    QAM techniques above level 16 if the ‘total digital transfer rate’ is equal to or less than 8,5 Mbit/s;

    c. 

    Other digital modulation techniques and having a ‘spectral efficiency’ exceeding 3 bit/s/Hz; or

    d. 

    Operating in the 1,5 MHz to 87,5 MHz band and incorporating adaptive techniques providing more than 15 dB suppression of an interfering signal.

    Notes:

    1.   X.A.III.101.b.7 does not control equipment specially designed to be integrated and operated in any satellite system for civil use.

    2.   X.A.III.101.b.7 does not control radio relay equipment for operation in an International Telecommunications Union (ITU) allocated band:

    a.   Having any of the following:

    1.   Not exceeding 960 MHz; or

    2.   With a ‘total digital transfer rate’ not exceeding 8,5 Mbit/s; and

    b.   Having a ‘spectral efficiency’ not exceeding 4 bit/s/Hz.

    c. 

    ‘Stored program controlled’ switching equipment and related signalling systems, having any of the following characteristics, functions or features, and specially designed components and accessories therefor:

    Note : Statistical multiplexers with digital input and digital output which provide switching are treated as ‘stored program controlled’ switches.

    1. 

    ‘Data (message) switching’ equipment or systems designed for ‘packet-mode operation’, ‘electronic assemblies’ and components therefor, other than those specified in the CML or in Regulation (EU) 2021/821;

    2. 

    Not used;

    3. 

    Routing or switching of ‘datagram’ packets;

    Note : X.A.III.101.c.3 does not control networks restricted to using only ‘network access controllers’ or to ‘network access controllers’ themselves.

    4. 

    Not used;

    5. 

    Multi-level priority and pre-emption for circuit switching;

    Note : X.A.III.101.c.5 does not control single-level call pre-emption.

    6. 

    Designed for automatic hand-off of cellular radio calls to other cellular switches or automatic connection to a centralised subscriber data base common to more than one switch;

    7. 

    Containing ‘stored program controlled’ digital cross connect equipment with ‘digital transfer rate’ exceeding 8,5 Mbit/s per port:

    8. 

    ‘Common channel signalling’ operating in either non-associated or quasi-associated mode of operation;

    9. 

    ‘Dynamic adaptive routing’;

    10. 

    Being packet switches, circuit switches and routers with ports or lines exceeding any of the following:

    a. 

    A ‘data signalling rate’ of 64 000 bit/s per channel for a ‘communications channel controller’; or

    Note : X.A.III.101.c.10.a does not control multiplex composite links composed only of communication channels not individually controlled by X.A.III.101.b.1.

    b. 

    A ‘digital transfer rate’ of 33 Mbit/s for a ‘network access controller’ and related common media;

    Note : X.A.III.101.c.10 does not control packet switches or routers with ports or lines not exceeding the limits in X.A.III.101.c.10.

    11. 

    ‘Optical switching’;

    12. 

    Employing ‘Asynchronous Transfer Mode’ (‘ATM’) techniques.

    d. 

    Optical fibres and optical fibre cables of more than 50 m in length designed for single mode operation;

    e. 

    Centralised network control having all of the following characteristics:

    1. 

    Receives data from the nodes; and

    2. 

    Process these data in order to provide control of traffic not requiring operator decisions, and thereby performing ‘dynamic adaptive routing’;

    Note 1: X.A.III.101.e does not include cases of routing decisions taken on predefined information.

    Note 2: X.A.III.101.e does not preclude control of traffic as a function of predictable statistical traffic conditions.

    f. 

    Phased array antennas, operating above 10,5 GHz, containing active elements and distributed components, and designed to permit electronic control of beam shaping and pointing, except for landing systems with instruments meeting International Civil Aviation Organization (ICAO) standards (microwave landing systems (MLS));

    g. 

    Mobile communications equipment other than those specified in the CML or in Regulation (EU) 2021/821, ‘electronic assemblies’ and components therefor; or

    h. 

    Radio relay communications equipment designed for use at frequencies equal to or exceeding 19,7 GHz and components therefor, other than those specified in the CML or in Regulation (EU) 2021/821.

    Technical Note : For the purpose of X.A.III.101:

    1)   ‘Asynchronous transfer mode’ (‘ATM’) is a transfer mode in which the information is organised into cells; it is asynchronous in the sense that the recurrence of cells depends on the required or instantaneous bit rate.

    2)   ‘Bandwidth of one voice channel’ is data communication equipment designed to operate in one voice channel of 3 100 Hz, as defined in CCITT Recommendation G.151.

    3)   ‘Communications channel controller’ is the physical interface that controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.

    4)   ‘Datagram’ is a self-contained, independent entity of data carrying sufficient information to be routed from the source to the destination data terminal equipment without reliance on earlier exchanges between this source and destination data terminal equipment and the transporting network.

    5)   ‘Fast select’ is a facility applicable to virtual calls that allows data terminal equipment to expand the possibility to transmit data in call set-up and clearing ‘packets’ beyond the basic capabilities of a virtual call.

    6)   ‘Gateway’ is the function, realised by any combination of equipment and ‘software’, to carry out the conversion of conventions for representing, processing or communicating information used on one system into the corresponding, but different conventions used in another system.

    7)   ‘Integrated Services Digital Network’ (ISDN) is a unified end- to-end digital network, in which data originating from all types of communication (e.g., voice, text, data, still and moving pictures) are transmitted from one port (terminal) in the exchange (switch) over one access line to and from the subscriber.

    8)   ‘Packet’ is a group of binary digits including data and call control signals that is switched as a composite whole. The data, call control signals, and possible error control information are arranged in a specified format.

    9)   ‘Common channel signalling’ means the transmission of control information (signalling) via a separate channel than that used for the messages. The signalling channel usually controls multiple message channels.

    10)   ‘Data signalling rate’ means the rate, as defined in ITU Recommendation 53-36, taking into account that, for non-binary modulation, baud and bit per second are not equal. Bits for coding, checking and synchronization functions are to be included.

    11)   ‘Dynamic adaptive routing’ means Automatic rerouting of traffic based on sensing and analysis of current actual network conditions

    12)   ‘Media access unit’ means equipment that contains one or more communication interfaces (‘network access controller’, ‘communications channel controller’, modem or computer bus) to connect terminal equipment to a network.

    13)   ‘Spectral efficiency’ is the ‘digital transfer rate’ [bits/s] / 6 dB spectrum bandwidth in Hz.

    14)   ‘Stored program controlled’ is a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions.

    Note : Equipment may be ‘stored program controlled’ whether the electronic storage is internal or external to the equipment.

    X.B.III.101 Telecommunications test equipment, other than those specified in the CML or in Regulation (EU) 2021/821.

    X.C.III.101 Preforms of glass or of any other material optimised for the manufacture of optical fibres controlled by X.A.III.101.

    X.D.III.101 ‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.III.101 and X.B.III.101, and dynamic adaptive routing ‘software’ as described as follows:

    a. 

    ‘Software’, other than in machine-executable form, specially designed for ‘dynamic adaptive routing’;

    b. 

    Not used.

    X.E.III.101 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.III.101 or X.B.III.101, or ‘software’ controlled by X.D.III.101, and other ‘technologies’ as follows:

    a. 

    Specific ‘technologies’ as follows:

    1. 

    ‘Technology’ for the processing and application of coatings to optical fibre specially designed to make it suitable for underwater use;

    2. 

    ‘Technology’ for the ‘development’ of equipment employing ‘Synchronous Digital Hierarchy’ (‘SDH’) or ‘Synchronous Optical Network’ (‘SONET’) techniques.

    Technical Note : For the purpose of X.E.III.101:

    1)   ‘Synchronous digital hierarchy’ (SDH) is a digital hierarchy providing a means to manage, multiplex, and access various forms of digital traffic using a synchronous transmission format on different types of media. The format is based on the Synchronous Transport Module (STM) that is defined by CCITT Recommendation G.703, G.707, G.708, G.709 and others yet to be published. The first level rate of ‘SDH’ is 155,52 Mbit/s.

    2)   ‘Synchronous optical network’ (SONET) is a network providing a means to manage, multiplex and access various forms of digital traffic using a synchronous transmission format on fibre optics. The format is the North America version of ‘SDH’ and also uses the Synchronous Transport Module (STM). However, it uses the Synchronous Transport Signal (STS) as the basic transport module with a first level rate of 51,81 Mbit/s. The SONET standards are being integrated into those of ‘SDH’.

    Category III. Part 2 – Information Security

    Note : Category III. Part 2 does not control goods for the personal use of the natural persons.

    X.A.III.201 Equipment as follows:

    a. 

    Not used;

    b. 

    Not used;

    c. 

    Goods classified as mass market encryption in accordance with Cryptography Note – Note 3 to Category 5, Part 2 ( 48 ).

    X.D.III.201 ‘Information Security’‘software’ as follows:

    Note : This entry does not control ‘software’ designed or modified to protect against malicious computer damage, e.g., viruses, where the use of ‘cryptography’ is limited to authentication, digital signature and/or the decryption of data or files.

    a. 

    Not used;

    b. 

    Not used;

    c. 

    ‘Software’ classified as mass market encryption ‘software’ in accordance with Cryptography Note – Note 3 to Category 5, Part 2 ( 49 ).

    X.E.III.201 ‘Information Security’‘technology’ according to the General Technology Note, as follows:

    a. 

    Not used;

    b. 

    ‘Technology’, other than specified in the CML or in Regulation (EU) 2021/821, for the ‘use’ of mass market goods controlled by X.A.III.201.c or mass market ‘software’ controlled by X.D.III.201.c.

    Category IV – Sensors and Lasers

    X.A.IV.001 Marine or terrestrial acoustic equipment, capable of detecting or locating underwater objects or features or positioning surface vessels or underwater vehicles; and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.

    X.A.IV.002 Optical Sensors as follows:

    a. 

    Image intensifier tubes and specially designed components therefor, as follows:

    1. 

    Image intensifier tubes having all the following:

    a. 

    A peak response in wavelength range exceeding 400 nm, but not exceeding 1 050 nm;

    b. 

    A microchannel plate for electron image amplification with a hole pitch (centre-to-centre spacing) of less than 25 μm; and

    c. 

    Having any of the following:

    1. 

    An S-20, S-25 or multialkali photocathode; or

    2. 

    A GaAs or GaInAs photocathode;

    2. 

    Specially designed microchannel plates having both of the following characteristics:

    a. 

    15 000 or more hollow tubes per plate; and

    b. 

    Hole pitch (centre-to-centre spacing) of less than 25 μm.

    b. 

    Direct view imaging equipment operating in the visible or infrared spectrum, incorporating image intensifier tubes having the characteristics listed in X.A.IV.002.a.1.

    X.A.IV.003 Cameras as follows:

    a. 

    Cameras that meet the criteria of Note 3 to 6A003.b.4. ( 50 );

    b. 

    Not used;

    X.A.IV.004 Optics as follows:

    Note : X.A.IV.004 does not control optical filters with fixed air gaps or Lyot-type filters.

    a. 

    Optical filters:

    1. 

    For wavelengths longer than 250 nm, comprised of multi-layer optical coatings and having either of the following:

    a. 

    Bandwidths equal to or less than 1 nm Full Width Half Intensity (FWHI) and peak transmission of 90 % or more; or

    b. 

    Bandwidths equal to or less than 0,1 nm FWHI and peak transmission of 50 % or more;

    2. 

    For wavelengths longer than 250 nm, and having all of the following:

    a. 

    Tunable over a spectral range of 500 nm or more;

    b. 

    Instantaneous optical bandpass of 1,25 nm or less;

    c. 

    Wavelength resettable within 0,1 ms to an accuracy of 1 nm or better within the tunable spectral range; and

    d. 

    A single peak transmission of 91 % or more;

    3. 

    Optical opacity switches (filters) with a field of view of 30° or wider and a response time equal to or less than 1 ns;

    b. 

    ‘Fluoride fibre’ cable, or optical fibres therefor, having an attenuation of less than 4 dB/km in the wavelength range exceeding 1 000 nm but not exceeding 3 000  nm;

    Technical Note : For the purpose of X.A.IV.004.b ‘Fluoride fibres’ are fibres manufactured from bulk fluoride compounds.

    X.A.IV.005 ‘Lasers’ as follows:

    a. 

    Carbon dioxide (CO2) ‘lasers’ having any of the following:

    1. 

    A CW output power exceeding 10 kW;

    2. 

    A pulsed output with a ‘pulse duration’ exceeding 10 μs; and

    a. 

    An average output power exceeding 10 kW; or

    b. 

    A pulsed ‘peak power’ exceeding 100 kW; or

    3. 

    A pulsed output with a ‘pulse duration’ equal to or less than 10 μs; and

    a. 

    A pulse energy exceeding 5 J per pulse and ‘peak power’ exceeding 2,5 kW; or

    b. 

    An average output power exceeding 2,5 kW;

    b. 

    Semiconductor lasers, as follows:

    1. 

    Individual, single-transverse mode semiconductor ‘lasers’ having:

    a. 

    An average output power exceeding 100 mW; or

    b. 

    A wavelength exceeding 1 050 nm;

    2. 

    Individual, multiple-transverse mode semiconductor ‘lasers’, or arrays of individual semiconductor ‘lasers’, having a wave-length exceeding 1 050  nm;

    c. 

    Ruby ‘lasers’ having an output energy exceeding 20 J per pulse;

    d. 

    Non-‘tunable’‘pulsed lasers’ having an output wavelength exceeding 975 nm but not exceeding 1 150 nm and having any of the following:

    1. 

    A ‘pulse duration’ equal to or exceeding 1 ns but not exceeding 1 μs, and having any of the following:

    a. 

    A single transverse mode output and having any of the following:

    1. 

    A ‘wall-plug efficiency’ exceeding 12 % and an ‘average output power’ exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or

    2. 

    An ‘average output power’ exceeding 20 W; or

    b. 

    A multiple transverse mode output and having any of the following:

    1. 

    A ‘wall-plug efficiency’ exceeding 18 % and an ‘average output power’ exceeding 30 W;

    2. 

    A ‘peak power’ exceeding 200 MW; or

    3. 

    An ‘average output power’ exceeding 50 W; or

    2. 

    A ‘pulse duration’ exceeding 1 μs and having any of the following:

    a. 

    A single transverse mode output and having any of the following:

    1. 

    A ‘wall-plug efficiency’ exceeding 12 % and an ‘average output power’ exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or

    2. 

    An ‘average output power’ exceeding 20 W; or

    b. 

    A multiple transverse mode output and having any of the following:

    1. 

    A ‘wall-plug efficiency’ exceeding 18 % and an ‘average output power’ exceeding 30 W; or

    2. 

    An ‘average output power’ exceeding 500 W;

    e. 

    Non-‘tunable’ continuous wave ‘(CW) lasers’, having an output wavelength exceeding 975 nm but not exceeding 1 150 nm and having any of the following:

    1. 

    A single transverse mode output and having any of the following:

    a. 

    A ‘wall-plug efficiency’ exceeding 12 % and an ‘average output power’ exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or

    b. 

    An ‘average output power’ exceeding 50 W; or

    2. 

    A multiple transverse mode output and having any of the following:

    a. 

    A ‘wall-plug efficiency’ exceeding 18 % and an ‘average output power’ exceeding 30 W; or

    b. 

    An ‘average output power’ exceeding 500 W;

    Note : X.A.IV.005.e.2.b does not control multiple transverse mode, industrial ‘lasers’ with output power less than or equal to 2 kW with a total mass greater than 1 200 kg. For the purpose of this note, total mass includes all components required to operate the ‘laser’, e.g., ‘laser’, power supply, heat exchanger, but excludes external optics for beam conditioning and/or delivery.

    f. 

    Non-‘tunable’‘lasers’, having a wavelength exceeding 1 400 nm, but not exceeding 1 555 nm and having any of the following:

    1. 

    An output energy exceeding 100 mJ per pulse and a pulsed ‘peak power’ exceeding 1 W; or

    2. 

    An average or CW output power exceeding 1 W;

    g. 

    Free electron ‘lasers’.

    Technical Note : For the purpose of X.A.IV.005 ‘wall-plug efficiency’ is defined as the ratio of ‘laser’ output power (or ‘average output power’) to total electrical input power required to operate the ‘laser’, including the power supply/conditioning and thermal conditioning/heat exchanger.

    X.A.IV.006 ‘Magnetometers’, ‘Superconductive’ electromagnetic sensors, and specially designed components therefor, as follows:

    a. 

    ‘Magnetometers’, other than those specified in the CML or in Regulation (EU) 2021/821, having a ‘sensitivity’ lower (better) than 1,0 nT (rms) per square root Hz.

    Technical Note : For the purposes of X.A.IV.006.a, ‘sensitivity’ (noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured.

    b. 

    ‘Superconductive’ electromagnetic sensors, components manufactured from ‘superconductive’ materials:

    1. 

    Designed for operation at temperatures below the ‘critical temperature’ of at least one of their ‘superconductive’ constituents (including Josephson effect devices or ‘superconductive’ quantum interference devices (SQUIDS));

    2. 

    Designed for sensing electromagnetic field variations at frequencies of 1 kHz or less; and

    3. 

    Having any of the following characteristics:

    a. 

    Incorporating thin-film SQUIDS with a minimum feature size of less than 2 μm and with associated input and output coupling circuits;

    b. 

    Designed to operate with a magnetic field slew rate exceeding 1 x 106 magnetic flux quanta per second;

    c. 

    Designed to function without magnetic shielding in the earth’s ambient magnetic field; or

    d. 

    Having a temperature coefficient less (smaller) than 0,1 magnetic flux quantum/K.

    X.A.IV.007 Gravity meters (gravimeters) for ground use, other than those specified in the CML or in Regulation (EU) 2021/821, as follows:

    a. 

    Having a static accuracy of less (better) than 100 μGal; or

    b. 

    Being of the quartz element (Worden) type.

    X.A.IV.008 Radar systems, equipment and major components, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor, as follows:

    a. 

    Airborne radar equipment, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor;

    b. 

    ‘Space-qualified’‘laser’ radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation;

    c. 

    Millimeter wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following:

    1. 

    Operates at a frequency of 94 GHz;

    2. 

    An average output power of less than 20 mW;

    3. 

    Radar beam width of 1 degree; and

    4. 

    Operating range equal to or greater than 1 500 m.

    X.A.IV.009 Specific processing equipment, as follows:

    a. 

    Seismic detection equipment not controlled by X.A.IV.009.c;

    b. 

    Radiation hardened TV cameras, other than those specified in the CML or in Regulation (EU) 2021/821; or

    c. 

    Seismic intrusion detection systems that detect, classify and determine the bearing on the source of a detected signal.

    X.B.IV.001 Equipment, including tools, dies, fixtures or gauges, and other specially designed components and accessories therefor, specially designed or modified for any of the following:

    a. 

    For the manufacture or inspection of:

    1. 

    Free electron ‘laser’ magnet wigglers;

    2. 

    Free electron ‘laser’ photo injectors;

    b. 

    For the adjustment, to required tolerances, of the longitudinal magnetic field of free electron ‘lasers’.

    X.C.IV.001 Optical sensing fibres that are modified structurally to have a ‘beat length’ of less than 500 mm (high birefringence) or optical sensor materials not described in 6C002.b ( 51 ) and having a zinc content of equal to or more than 6 % by ‘mole fraction.’

    Technical Note : For the purpose of X.C.IV.001:

    1)   ‘Mole fraction’ is defined as the ratio of moles of ZnTe to the sum of the moles of CdTe and ZnTe present in the crystal.

    2)   ‘Beat length’ is the distance over which two orthogonally polarised signals, initially in phase, must pass in order to achieve a 2 Pi radian(s) phase difference.

    X.C.IV.002 Optical materials, as follows:

    a. 

    Low optical absorption materials, as follows:

    1. 

    Bulk fluoride compounds containing ingredients with a purity of 99,999 % or better; or

    Note : X.C.IV.002.a.1 controls fluorides of zirconium or aluminium and variants.

    2. 

    Bulk fluoride glass made from compounds controlled by 6C004.e.1 ( 52 );

    b. 

    ‘Optical fibre preforms’ made from bulk fluoride compounds containing ingredients with a purity of 99,999 % or better, specially designed for the manufacture of ‘fluoride fibres’ controlled by X.A.IV.004.b.

    Technical Note : For the purpose of X.C.IV.002:

    1)   ‘Fluoride fibres’ are fibres manufactured from bulk fluoride compounds.

    2)   ‘Optical fibre preforms’ are bars, ingots, or rods of glass, plastic or other materials that have been specially processed for use in fabricating optical fibres. The characteristics of the preform determine the basic parameters of the resultant drawn optical fibres.

    X.D.IV.001 ‘Software’, other than those specified in the CML or in Regulation (EU) 2021/821, specially designed for the ‘development’, ‘production’, or ‘use’ of goods controlled by 6A002, 6A003 ( 53 ), X.A.IV.001, X.A.IV.006, X.A.IV.007, or X.A.IV.008.

    X.D.IV.002 ‘Software’ specially designed for the ‘development’ or ‘production’ of equipment controlled by X.A.IV.002, X.A.IV.004, or X.A.IV.005.

    X.D.IV.003 Other ‘software’, as follows:

    a. 

    Air Traffic Control (ATC) ‘software’ application ‘programs’ hosted on general purpose computers located at Air Traffic Control centres, and capable of automatically handing over primary radar target data (if not correlated with secondary surveillance radar (SSR) data) from the host ATC centre to another ATC centre;

    b. 

    ‘Software’ specially designed for seismic intrusion detection systems in X.A.IV.009.c; or

    c. 

    ‘Source code’ specially designed for seismic intrusion detection systems in X.A.IV.009.c.

    X.E.IV.001 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.IV.001, X.A.IV.006, X.A.IV.007, X.A.IV.008 or X.A.IV.009.c.

    X.E.IV.002 ‘Technology’ for the ‘development’ or ‘production’ of equipment, materials or ‘software’ controlled by X.A.IV.002, X.A.IV.004, or X.A.IV.005, X.B.IV.001, X.C.IV.001, X.C.IV.002, or X.D.IV.003.

    X.E.IV.003 Other ‘technology’ as follows:

    a. 

    Optical fabrication technologies for serially producing optical components at a rate exceeding 10 m2 of surface area per year on any single spindle and having all of the following:

    1. 

    Area exceeding 1 m2; and

    2. 

    Surface figure exceeding λ/10 (rms) at the designed wavelength;

    b. 

    ‘Technology’ for optical filters with a bandwidth equal to or less than 10 nm, a field of view (FOV) exceeding 40° and a resolution exceeding 0,75 line pairs per milliradian;

    c. 

    ‘Technology’ for the ‘development’ or ‘production’ of cameras controlled by X.A.IV.003;

    d. 

    ‘Technology’‘required’ for the ‘development’ or ‘production’ of non-triaxial fluxgate ‘magnetometers’ or non-triaxial fluxgate ‘magnetometer’ systems, having any of the following:

    1. 

    ‘Sensitivity’ lower (better) than 0,05 nT (rms) per square root Hz at frequencies of less than 1 Hz; or

    2. 

    ‘Sensitivity’ lower (better) than 1 x 10-3 nT (rms) per square root Hz at frequencies of 1 Hz or more.

    e. 

    ‘Technology’‘required’ for the ‘development’ or ‘production’ of infrared up-conversion devices having all of the following:

    1. 

    A response in the wavelength range exceeding 700 nm but not exceeding 1 500 nm; and

    2. 

    A combination of an infrared photodetector, light emitting diode (OLED), and nanocrystal to convert infrared light into visible light.

    Technical Note : For the purposes of X.E.IV.003, ‘sensitivity’ (or noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured.

    Category V – Navigation and Avionics

    X.A.V.001 Airborne communication equipment, all ‘aircraft’ inertial navigation systems, and other avionic equipment, including components, other than those specified in the CML or in Regulation (EU) 2021/821.

    Note 1 : X.A.V.001. does not control headsets or microphones.

    Note 2 : X.A.V.001. does not control goods for the personal use of the natural persons.

    X.B.V.001 Other equipment specially designed for the test, inspection, or ‘production’ of navigation and avionics equipment.

    X.D.V.001 ‘Software’, other than specified in the CML or in Regulation (EU) 2021/821, for the ‘development’, ‘production’, or ‘use’ of navigation, airborne communication and other avionics.

    X.E.V.001 ‘Technology’, other than specified in the CML or in Regulation (EU) 2021/821, for the ‘development’, ‘production’ or ‘use’ of navigation, airborne communication, and other avionics equipment.

    Category VI – Marine

    X.A.VI.001 Vessels, marine systems or equipment, and specially designed components therefor, components and accessories as follows:

    a. 

    Underwater vision systems, as follows:

    1. 

    Television systems (comprising camera, lights, monitoring and signal transmission equipment) having a limiting resolution when measured in air of more than 500 lines and specially designed or modified for remote operation with a submersible vehicle; or

    2. 

    Underwater television cameras having a limiting resolution when measured in air of more than 700 lines;

    Technical Note : Limiting resolution in television is a measure of horizontal resolution usually expressed in terms of the maximum number of lines per picture height discriminated on a test chart, using IEEE Standard 208/1960 or any equivalent standard.

    b. 

    Photographic still cameras specially designed or modified for underwater use, having a film format of 35 mm or larger, and having autofocusing or remote focusing specially designed for underwater use;

    c. 

    Stroboscopic light systems, specially designed or modified for underwater use, capable of a light output energy of more than 300 J per flash;

    d. 

    Other underwater camera equipment, other than those specified in the CML or in Regulation (EU) 2021/821;

    e. 

    Marine boilers designed to have any of the following characteristics:

    1. 

    Heat release rate (at maximum rating) equal to or in excess of 1 966,4  kW/m3 of furnace volume; or

    2. 

    Ratio of steam generated in kilogram per hour (at maximum rating) to the dry weight of the boiler in kilograms equal to or in excess of 37,6.;

    f. 

    Vessels (surface or underwater), including inflatable boats, and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821;

    Note : X.A.VI.001.f does not control vessels on temporary sojourn, used for private transport or for the transport of passengers or goods from or through the customs territory of the Union.

    g. 

    Marine engines (both inboard and outboard) and submarine engines and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821;

    h. 

    Self-contained underwater breathing apparatus (scuba gear) and accessories therefor, other than those specified in the CML or in Regulation (EU) 2021/821;

    i. 

    Life jackets, inflation cartridges, dive compasses and dive computers;

    Note : X.A.VI.001.i does not control goods for the personal use of the natural persons.

    j. 

    Underwater lights and propulsion equipment; or

    Note : X.A.VI.001.j does not control goods for the personal use of the natural persons.

    k. 

    Air compressors and filtration system specially designed for filling air cylinders.

    X.D.VI.001 ‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.VI.001.

    X.D.VI.002 ‘Software’ specially designed for the operation of unmanned submersible vehicles used in the oil and gas industry.

    X.E.VI.001 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.VI.001.

    Category VII – Aerospace and Propulsion

    X.A.VII.001 Diesel engines, and tractors and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821:

    a. 

    Diesel engines, other than those specified in the CML or in Regulation (EU) 2021/821, for trucks, tractors, and automotive applications, having an overall power output of 298 kW or more.

    b. 

    Off highway wheel tractors of carriage capacity 9 tonnes or more; and major components and accessories, other than those specified in the CML or in Regulation (EU) 2021/821.

    c. 

    Road tractors for semi-trailers, with single or tandem rear axles rated for 9 tonnes per axel or more and specially designed major components.

    Note : X.A.VII.001.b and X.A.VII.001.c do not control vehicles on temporary sojourn, used for private transport or for the transport of passengers or goods from or through the customs territory of the Union.

    X.A.VII.002 Gas turbine engines and components, other than those specified in the CML or in Regulation (EU) 2021/821.

    a. 

    Not used.

    b. 

    Not used.

    c. 

    Aero gas turbine engines and components specially designed therefor.

    d. 

    Not used.

    e. 

    Pressurised aircraft breathing equipment components specially designed therefor, other than those specified in the CML or in Regulation (EU) 2021/821.

    X.A.VII.003 Aircraft engines, other than those specified in X.A.VII.002, the CML or in Regulation (EU) 2021/821, as follows:

    a. 

    Reciprocating or rotary internal combustion piston engines; or

    b. 

    Electric engines.

    Technical Note : For the purpose of X.A.VII.003 aircrafts includes: aeroplanes, UAVs, helicopters, autogyros, hybrid aircrafts or radio-controlled models.

    X.B.VII.001 Vibration test equipment and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.

    Note : X.B.VII.001. controls only equipment for the ‘development’ or ‘production’. It does not control condition monitoring systems.

    X.B.VII.002 Specially designed equipment, tooling or fixtures for manufacturing or measuring gas turbine blades, vanes or tip shroud castings, as follows:

    a. 

    Automated equipment using non-mechanical methods for measuring airfoil wall thickness;

    b. 

    Tooling, fixtures or measuring equipment for the ‘laser’, water jet or ECM/EDM hole drilling processes controlled by 9E003.c ( 54 );

    c. 

    Ceramic core leaching equipment;

    d. 

    Ceramic core manufacturing equipment or tools;

    e. 

    Ceramic shell wax pattern preparation equipment;

    f. 

    Ceramic shell burn out or firing equipment.

    X.D.VII.001 ‘Software’, other than those specified in the CML or in Regulation (EU) 2021/821, for the ‘development’ or ‘production’ of equipment controlled by X.A.VII.001 or X.B.VII.001.

    X.D.VII.002 ‘Software’, for the ‘development’ or ‘production’ of equipment controlled by X.A.VII.002 or X.B.VII.002.

    X.E.VII.001 ‘Technology’, other than those specified in the CML or in Regulation (EU) 2021/821, for the ‘development’ or ‘production’ or ‘use’ of equipment controlled by X.A.VII.001 or X.B.VII.001.

    X.E.VII.002 ‘Technology’, for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.VII.002 or X.B.VII.002.

    X.E.VII.003 Other ‘technology’, not described by 9E003 ( 55 ), as follows:

    a. 

    Rotor blade tip clearance control systems employing active compensating casing ‘technology’ limited to a design and development data base; or

    b. 

    Gas bearing for turbine engine rotor assemblies.

    Category VIII – Miscellaneous items

    X.A.VIII.001 Equipment for oil production or oil exploration as follows:

    a. 

    Drill head integrated measurement equipment, including inertial navigation systems for measurement while drilling (MWD);

    b. 

    Gas monitoring systems and detectors therefor, designed for continuous operation and detection of hydrogen sulphide;

    c. 

    Equipment for seismological measurements, including reflection seismetics and seismic vibrators;

    d. 

    Sediment echo sounders.

    X.A.VIII.002 Equipment, ‘electronic assemblies’ and components, specially designed for quantum computers, quantum electronics, quantum sensors, quantum processing units, qubit circuits, qubit devices or quantum radar systems, including pockels cells.

    Note 1 : Quantum computers perform computations that harness the collective properties of quantum states, such as superposition, interference and entanglement.

    Note 2 : Units, circuits and devices include but are not limited to superconducting circuits, Quantum annealing, Ion Trap, photonic interaction, silicon/spin, cold atoms.

    X.A.VIII.003 Microscopes, related equipment and detectors as follows:

    a. 

    Scanning electron microscopes (SEM);

    b. 

    Scanning auger microscopes;

    c. 

    Transmission electron microscopes (TEM);

    d. 

    Atomic force microscopes (AFM);

    e. 

    Scanning force microscopes (SFM);

    f. 

    Equipment and detectors, specially designed for use with the microscopes specified in X.A.VIII.003.a to X.A.VIII.0003.e, employing any of the following material analysis techniques:

    1. 

    X-ray photo spectroscopy (XPS);

    2. 

    Energy-dispersive X-ray spectroscopy (EDX, EDS) or

    3. 

    Electron spectroscopy for chemical analysis (ESCA).

    X.A.VIII.004 Collector equipment for metal ores in deep seabed.

    X.A.VIII.005 Manufacturing equipment and machine tools as follows:

    a. 

    Additive manufacturing equipment for the ‘production’ of metal parts;

    Note : X.A.VIII.005.a only applies to the following systems:

    1.   Powder-bed systems using selective laser melting (SLM), laser cusing, direct metal laser sintering (DMLS) or electron beam melting (EBM); or

    2.   Powder-fed systems using laser cladding, direct energy deposition or laser metal deposition.

    b. 

    Additive manufacturing equipment for ‘energetic materials’, including equipment using ultrasonic extrusion;

    c. 

    Vat photopolymerization (VVP) additive manufacturing equipment using stereo lithography (SLA) or digital light processing (DLP).

    X.A.VIII.006 Equipment for the ‘production’ of printed electronics for organic light emitting diodes (OLED), organic field-effect transistors (OFET) or organic photovoltaic cells (OPVC).

    X.A.VIII.007 Equipment for the ‘production’ of microelectromechanical systems (MEMS) using the mechanical properties of silicon, including sensors in chip format like pressure membranes, bending beams or micro adjustment devices.

    X.A.VIII.008 Equipment, specially designed for the production of E-Fuels (electrofuels and synthetic fuels) or ultra efficient solar cells (efficiency 30 %).

    X.A.VIII.009 Equipment for Ultra-High-Vacuum (UHV) as follows:

    a. 

    UHV pumps (sublimation, turbomolecular, diffusion, cryogenic, ion getter);

    b. 

    UHV pressure gauges.

    Note : UHV means 100 nanoPascals (nPa) or lower.

    X.A.VIII.010 ‘Cryogenic refrigeration systems’ designed to maintain temperatures below 1,1 K for 48 hrs or more and related cryogenic refrigeration equipment as follows:

    a. 

    Pulse Tubes;

    b. 

    Cryostats;

    c. 

    Dewars;

    d. 

    Gas Handling System (GHS);

    e. 

    Compressors; or

    f. 

    Control Units.

    Note : ‘Cryogenic refrigeration systems’ include but are not limited to Dilution Refrigeration, Adiabatic Demagnisation Refrigerators and Laser Cooling Systems.

    X.A.VIII.011 ‘Decapsulation’ equipment for semiconductor devices.

    Note : ‘Decapsulation’ is the removal of a cap, lid, or encapsulating material from a packaged integrated circuit by mechanical, thermal, or chemical means.

    X.A.VIII.012 High Quantum Efficiency (QE) photodetectors with a QE greater than 80 % in the wavelength range exceeding 400 nm but not exceeding 1 600  nm.

    X.AVIII.013 Numerical controlled machine tools, having one or more linear axis with a travel length greater than 8 000  mm.

    X.A.VIII.014 Water cannon systems for riot or crowd control, and components specially designed therefor.

    Note : X.A.VIII.014 water cannon systems include, for example: vehicles or fixed stations equipped with remotely operated water cannon that are designed to protect the operator from an outside riot with features such as armor, shatter resistant windows, metal screens, bull-bars, or run-flat tires. Components specially designed for water cannons may include, for example: deck gun water nozzles, pumps, reservoirs, cameras, and lights that are hardened or shielded against projectiles, elevating masts for those items, and teleoperation systems for those items.

    X.A.VIII.015 Law enforcement striking weapons, including saps, police batons, side handle batons, tonfas, sjamboks, and whips.

    X.A.VIII.016 Police helmets and shields; and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.

    X.A.VIII.017 Law enforcement restraint devices, including leg irons, shackles, and handcuffs; straight jackets; stun cuffs; shock belts; shock sleeves; multipoint restraint devices such as restraint chairs; and specially designed components and accessories, other than those specified in the CML or in Regulation (EU) 2021/821.

    Note : X.A.VIII.017 applies to restraint devices used in law enforcement activities. It does not apply to medical devices that are equipped to restrain patient movement during medical procedures. It does not apply to devices that confine memory impaired patients to appropriate medical facilities. It does not apply to safety equipment such as safety belts or child automobile safety seats.

    X.A.VIII.018 Oil and gas exploration equipment, ‘software’, and data, as follows (see List of Items Controlled):

    a. 

    Not used.

    b. 

    Hydraulic fracturing items, as follows:

    1. 

    Hydraulic fracturing design and analysis ‘software’ and data;

    2. 

    Hydraulic fracturing ‘proppant’, ‘fracking fluid’, and chemical additives therefor; or

    3. 

    High pressure pumps.

    Technical Note:

    A ‘proppant’ is a solid material, typically treated sand or man-made ceramic materials, designed to keep an induced hydraulic fracture open, during or following a fracturing treatment. It is added to a ‘fracking fluid’ which may vary in composition depending on the type of fracturing used, and can be gel, foam or slickwater-based.

    X.A.VIII.019 Specific processing equipment, as follows (see List of Items Controlled):

    a. 

    Ring magnets;

    b. 

    Not used.

    X.A.VIII.020 Weapons and devices designed for the purpose of riot control or self-protection, as follows:

    a. 

    Portable electric discharge weapons that can target only one individual each time an electric shock is administered, including but not limited to electric shock batons, electric shock shields, stun guns and electric shock dart guns;

    b. 

    Kits containing all essential components for assembly of portable electric discharge weapons controlled by item X.A.VIII.020.a; or

    Note : The following goods are considered to be essential components:

    1.   The unit producing an electric shock;

    2.   The switch, whether or not on a remote control; and

    3.   The electrodes or, where applicable, the wires through which the electrical shock is to be administered.

    c. 

    Fixed or mountable electric discharge weapons that cover a wide area and can target multiple individuals with electrical shocks.

    X.A.VIII.021 Weapons and equipment disseminating incapacitating or irritating chemical substances for the purpose of riot control or self-protection and certain related substances, as follows:

    a. 

    Portable weapons and equipment which either administer a dose of an incapacitating or irritating chemical substance that targets one individual or disseminate a dose of such substance affecting a small area, e.g. in the form of a spray fog or cloud, when the chemical substance is administered or disseminated;

    Note 1 : This item does not control equipment controlled by item ML7(e) of the CML of the European Union.

    Note 2 : This item does not control individual portable equipment, even if containing a chemical substance, when accompanying their user for the user’s own personal protection.

    Note 3 : In addition to relevant chemical substances, such as riot control agents or PAVA, the goods controlled by items X.A.VIII.021.c and X.A.VIII.021.d shall be deemed to be incapacitating or irritating chemical substances.

    b. 

    Pelargonic acid vanillylamide (PAVA) (CAS 2444-46-4);

    c. 

    Oleoresin capsicum (OC) (CAS 8023-77-6);

    d. 

    Mixtures containing at least 0,3 % by weight of PAVA or OC and a solvent (such as ethanol, 1-propanol or hexane), which could be administered as such as incapacitating or irritating agents, in particular in aerosols and in liquid form, or used for manufacturing of incapacitating or irritating agents;

    Note 1 : This item does not control sauces and preparations therefor, soups or preparations therefor and mixed condiments or seasonings, provided that PAVA or OC is not the only constituent flavour in them.

    Note 2 : This item does not control medicinal products for which a marketing authorisation has been granted in accordance with Union law.

    e. 

    Fixed equipment for the dissemination of incapacitating or irritating chemical substances, which can be attached to a wall or to a ceiling inside a building, comprises a canister of irritating or incapacitating chemical agents and is activated using a remote control system; or

    Note : In addition to relevant chemical substances, such as riot control agents or PAVA, the goods controlled by items X.A.VIII.021.c and X.A.VIII.021.d shall be deemed to be incapacitating or irritating chemical substances.

    f. 

    Fixed or mountable equipment for the dissemination of incapacitating or irritating chemical agents that covers a wide area and is not designed to be attached to a wall or to a ceiling inside a building;

    Note 1 : This item does not control equipment controlled by item ML7(e) of the CML of the European Union.

    Note 2 : In addition to relevant chemical substances, such as riot control agents or PAVA, the goods controlled by items X.A.VIII.021.c and X.A.VIII.021.d shall be deemed to be incapacitating or irritating chemical substances.

    g. 

    Other irritating chemical substances, and mixtures thereof containing at least 0,3 % by weight of the active substance, as follows:

    1. 

    Dibenzo[b,f][1,4]oxazepine (CR) (CAS 257-07-8);

    2. 

    8-Methyl-N-vanillyl-trans-6-nonenamide (capsaicin) (CAS 404-86-4);

    3. 

    8-Methyl-N-vanillylnonamide (dihydrocapsaicin) (CAS 19408-84-5);

    4. 

    N-Vanillyl-9-methyldec-7-(E)-enamide (homocapsaicin) (CAS 58493-48-4);

    5. 

    N-Vanillyl-9-methyldecanamide (homodihydrocapsaicin) (CAS 20279-06-5);

    6. 

    N-Vanillyl-7-methyloctanamide (nordihydrocapsaicin) (CAS 28789-35-7);

    7. 

    4-Nonanolylmorpholine (MPA) (CAS 5299-64-9);

    8. 

    Cis-4-acetylaminodicyclohexylmethane (CAS 37794-87-9);

    9. 

    N,N’-Bis(isopropyl)ethylenediimine; or

    10. 

    N,N’-Bis(tert-butyl)ethylenediimine.

    X.A.VIII.022 Products which could be used for the execution of human beings by means of lethal injection, as follows:

    a. 

    Short and intermediate acting barbiturate anaesthetic agents including, but not limited to:

    1. 

    Amobarbital (CAS 57-43-2);

    2. 

    Amobarbital sodium salt (CAS 64-43-7);

    3. 

    Pentobarbital (CAS 76-74-4);

    4. 

    Pentobarbital sodium salt (CAS 57-33-0);

    5. 

    Secobarbital (CAS 76-73-3);

    6. 

    Secobarbital sodium salt (CAS 309-43-3);

    7. 

    Thiopental (CAS 76-75-5); or

    8. 

    Thiopental sodium salt (CAS 71-73-8), also known as thiopentone sodium;

    b. 

    Products containing one of the anaesthetic agents listed under X.A.VIII.022.a.

    X.A.VIII.023 Nettings, canopies, tents, blankets and apparel, specially designed for camouflage.

    X.B.VIII.001 Specific processing equipment, as follows (see List of Items Controlled):

    a. 

    Hot cells; or

    b. 

    Glove boxes suitable for use with radioactive materials.

    X.C.VIII.001 Metal powders and metal alloy powders, usable for any of the systems listed in X.A.VIII.005.a.

    X.C.VIII.002 Advanced materials as follows:

    a. 

    Materials for cloaking or adaptive camouflage;

    b. 

    Metamaterials, e.g. with a negative refractive index;

    c. 

    Not used;

    d. 

    High entropy alloys (HEA);

    e. 

    Heusler compounds; or

    f. 

    Kitaev materials, including kitaev spin liquids.

    X.C.VIII.003 Conjugated polymers (conductive, semiconductive, electroluminescent) for printed or organic electronics.

    X.C.VIII.004 Energetic materials as follows and mixtures thereof:

    a. 

    Ammonium picrate (CAS 131-74-8);

    b. 

    Black powder;

    c. 

    Hexanitrodiphenylamine (CAS 131-73-7);

    d. 

    Difluoroamine (CAS 10405-27-3);

    e. 

    Nitrostarch (CAS9056-38-6);

    f. 

    Not used;

    g. 

    Tetranitronaphthalene;

    h. 

    Trinitroanisole;

    i. 

    Trinitronaphthalene;

    j. 

    Trinitroxylene;

    k. 

    N-pyrrolidinone; 1-methyl-2-pyrrolidinone (CAS 872-50-4);

    l. 

    Dioctylmaleate (CAS 142-16-5);

    m. 

    Ethylhexylacrylate (CAS 103-11-7);

    n. 

    Triethylaluminium (TEA) (CAS 97-93-8), trimethylaluminium (TMA) (CAS 75-24-1), and other pyrophoric metal alkyls and aryls of lithium, sodium, magnesium, zinc or boron;

    o. 

    Nitrocellulose (CAS 9004-70-0);

    p. 

    Nitroglycerin (or glyceroltrinitrate, trinitroglycerine) (NG) (CAS 55-63-0);

    q. 

    2,4,6-trinitrotoluene (TNT) (CAS 118-96-7);

    r. 

    Ethylenediaminedinitrate (EDDN) (CAS 20829-66-7);

    s. 

    Pentaerythritoltetranitrate (PETN) (CAS 78-11-5);

    t. 

    Lead azide (CAS 13424-46-9), normal lead styphnate (CAS 15245-44-0) and basic lead styphnate (CAS 12403-82-6), and primary explosives or priming compositions containing azides or azide complexes;

    u. 

    Not used;

    v. 

    Not used;

    w. 

    Diethyldiphenylurea (CAS 85-98-3); dimethyldiphenylurea (CAS 611-92-7); methylethyldiphenyl urea.

    x. 

    N,N-diphenylurea (unsymmetrical diphenylurea) (CAS 603-54-3);

    y. 

    Methyl-N,N-diphenylurea (methyl unsymmetrical diphenylurea) (CAS 13114-72-2);

    z. 

    Ethyl-N,N-diphenylurea (ethyl unsymmetrical diphenylurea) (CAS 64544-71-4);

    aa. 

    Not used;

    bb. 

    4-Nitrodiphenylamine (4-NDPA) (CAS 836-30-6);

    cc. 

    2,2-dinitropropanol (CAS 918-52-5); or

    dd. 

    Not used.

    X.D.VIII.001 ‘Software’, specially designed for the ‘development’, ‘production’ or ‘use’ of equipment specified in X.A.VIII.005 to X.A.VIII.0013.

    X.D.VIII.002 ‘Software’, specially designed for the ‘development’, ‘production’ or ‘use’ of equipment, ‘electronic assemblies’ or components specified in X.A.VIII.002.

    X.D.VIII.003 ‘Software’ for digital twins of additive manufacturing products or for the determination of the reliability of additive manufacturing products.

    X.D.VIII.004 ‘Software’ specially designed for the ‘development’, ‘production’ or ‘use’ of commodities controlled by X.A.VIII.014.

    X.D.VIII.005 Specific ‘software’, as follows (see List of Items Controlled):

    a. 

    ‘Software’ for neutronic calculations/modeling;

    b. 

    ‘Software’ for radiation transport calculations/modeling; or

    c. 

    ‘Software’ for hydrodynamic calculations/modeling.

    X.E.VIII.001 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment specified in X.A.VIII.001 to X.A.VIII.0013.

    X.E.VIII.002 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of materials specified in X.C.VIII.002 or X.C.VIII.003

    X.E.VIII.003 ‘Technology’ for digital twins of additive manufacturing products, for the determination of the reliability of additive manufacturing products or for ‘software’ specified in X.D.VIII.003.

    X.E.VIII.004 ‘Technology’ for the ‘development’, ‘production’ or ‘use’ of ‘software’ specified in X.D.VIII.001 to X.D.VIII.002.

    X.E.VIII.005 ‘Technology’‘required’ for the ‘development’ or ‘production’ of commodities controlled by X.A.VIII.014.

    X.E.VIII.006 ‘Technology’ exclusively for the ‘development’ or ‘production’ of equipment controlled by X.A.VIII.017.

    Category IX – Special Materials and Related Equipment

    X.A.IX.001 Chemical agents, including tear gas formulation containing 1 % or less of orthochlorobenzalmalononitrile (CS), or 1 % or less of chloroacetophenone (CN), except in individual containers with a net weight of 20 g or less; liquid pepper except when packaged in individual containers with a net weight of 85,05 g or less; smoke bombs; non-irritant smoke flares, canisters, grenades and charges; and other pyrotechnic articles having dual military and commercial use, and components specially designed therefor, other than those specified in the CML or in Regulation (EU) 2021/821.

    X.A.IX.002 Fingerprinting powders, dyes, and inks.

    X.A.IX.003 Protective and detection equipment not specially designed for military use and not controlled by 1A004 or 2B351 ( 56 ), as follows (see List of Items Controlled), and components not specially designed for military use and not controlled by 1A004 or 2B351 therefor:

    a. 

    Personal radiation monitoring dosimeters; or

    b. 

    Equipment limited by design or function to protect against hazards specific to civil industries, such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or to the food industry.

    Note : X.A.IX.003 does not control items for protection against chemical or biological agents that are consumer goods, packaged for retail sale or personal use, or medical products, such as latex exam gloves, latex surgical gloves, liquid disinfectant soap, disposable surgical drapes, surgical gowns, surgical foot covers, and surgical masks.

    X.A.IX.004 Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

    a. 

    Radiation detection, monitoring and measurement equipment, other than those specified in the CML or in Regulation (EU) 2021/821; or

    b. 

    Radiographic detection equipment such as X-ray converters, and storage phosphor image plates.

    X.B.IX.001 Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

    a. 

    Electrolytic cells for fluorine production, other than those specified in the CML or in Regulation (EU) 2021/821;

    b. 

    Particle accelerators;

    c. 

    Industrial process control hardware/systems designed for power industries, other than those specified in the CML or in Regulation (EU) 2021/821;

    d. 

    Freon and chilled water cooling systems capable of continuous cooling duties of 29,3 kW/hr or greater; or

    e. 

    Equipment for the production of structural composites, fibres, prepregs and preforms.

    X.C.IX.001 Separate chemically defined compounds according to Note 1 to Chapters 28 and 29 of the Combined Nomenclature:

    a. 

    In concentrations of 95 % weight or greater, as follows:

    1. 

    Ethylene dichloride (CAS 107-06-2);

    2. 

    Nitromethane (CAS 75-52-5);

    3. 

    Picric acid (CAS 88-89-1);

    4. 

    Aluminium chloride (CAS 7446-70-0);

    5. 

    Arsenic (CAS 7440-38-2);

    6. 

    Arsenic trioxide (CAS 1327-53-3);

    7. 

    Bis(2-chloroethyl)ethylamine hydrochloride (CAS 3590-07-6);

    8. 

    Bis(2-chloroethyl)methylamine hydrochloride (CAS 55-86-7);

    9. 

    Tris(2-chloroethyl)amine hydrochloride (CAS 817-09-4);

    10. 

    Tributylphosphite (CAS 102-85-2);

    11. 

    Isocyanatomethane (CAS 624-83-9);

    12. 

    Quinaldine (CAS 91-63-4);

    13. 

    2-bromochloroethane (CAS 107-04-0);

    14. 

    Benzil (CAS 134-81-6);

    15. 

    Diethyl ether (CAS 60-29-7);

    16. 

    Dimethyl ether (CAS 115-10-6);

    17. 

    Dimethylaminoethanol (CAS 108-01-0);

    18. 

    2-methoxyethanol (CAS 109-86-4);

    19. 

    Butyrylcholinesterase (BCHE);

    20. 

    Diethylenetriamine (CAS 111-40-0);

    21. 

    Dichloromethane (CAS 75-09-2);

    22. 

    Dimethylaniline (CAS 121-69-7);

    23. 

    Ethyl bromide (CAS 74-96-4);

    24. 

    Ethyl chloride (CAS 75-00-3);

    25. 

    Ethylamine (CAS 75-04-7);

    26. 

    Hexamine (CAS 100-97-0);

    27. 

    Isopropanol (CAS 67- 63-0);

    28. 

    Isopropyl bromide (CAS 75-26-3);

    29. 

    Isopropyl ether (CAS 108-20-3);

    30. 

    Methylamine (CAS 74-89-5);

    31. 

    Methyl bromide (CAS 74-83-9);

    32. 

    Monoisopropylamine (CAS 75-31-0);

    33. 

    Obidoxime chloride (CAS 114-90-9);

    34. 

    Potassium bromide (CAS 7758-02-3);

    35. 

    Pyridine (CAS 110-86-1);

    36. 

    Pyridostigmine bromide (CAS 101-26-8);

    37. 

    Sodium bromide (CAS 7647-15-6);

    38. 

    Sodium metal (CAS 7440-23-5);

    39. 

    Tributylamine (CAS 102-82-9);

    40. 

    Triethylamine (CAS 121-44-8); or

    41. 

    Trimethylamine (CAS 75-50-3).

    b. 

    In concentrations of 90 % weight or greater, as follows:

    1. 

    Acetone (CAS 67-64-1);

    2. 

    Acetylene (CAS 74-86-2);

    3. 

    Ammonia (CAS 7664-41-7);

    4. 

    Antimony (CAS 7440-36-0);

    5. 

    Benzaldehyde (CAS 100-52-7);

    6. 

    Benzoin (CAS 119-53-9);

    7. 

    1-Butanol (CAS 71-36-3);

    8. 

    2-Butanol (CAS 78-92-2);

    9. 

    Iso-Butanol (CAS 78-83-1);

    10. 

    Tert-Butanol (CAS 75-65-0);

    11. 

    Calcium carbide (CAS 75-20-7);

    12. 

    Carbon monoxide (CAS 630-08-0);

    13. 

    Chlorine (CAS 7782-50-5);

    14. 

    Cyclohexanol (CAS 108-93-0);

    15. 

    Dicyclohexylamine (CAS 101-83-7);

    16. 

    Ethanol (CAS 64-17-5);

    17. 

    Ethylene (CAS 74-85-1);

    18. 

    Ethylene oxide (CAS 75-21-8);

    19. 

    Fluoroapatite (CAS 1306-05-4);

    20. 

    Hydrogen chloride (CAS 7647-01-0);

    21. 

    Hydrogen sulfide (CAS 7783-06-4);

    22. 

    Mandelic acid (CAS 90-64-2);

    23. 

    Methanol (CAS 67-56-1);

    24. 

    Methyl chloride (CAS 74-87-3);

    25. 

    Methyl iodide (CAS 74-88-4);

    26. 

    Methyl mercaptan (CAS 74-93-1);

    27. 

    Monoethyleneglycol (CAS 107-21-1);

    28. 

    Oxalyl chloride (CAS 79-37-8);

    29. 

    Potassium sulphide (CAS 1312-73-8);

    30. 

    Potassium thiocyanate (CAS 333-20-0);

    31. 

    Sodium hypochlorite (CAS 7681-52-9);

    32. 

    Sulphur (CAS 7704-34-9);

    33. 

    Sulphur dioxide (CAS 7446-09-5);

    34. 

    Sulphur trioxide (CAS 7446-11-9);

    35. 

    Thiophosphoryl chloride (CAS 3982-91-0);

    36. 

    Tri-isobutyl phosphite (CAS 1606-96-8);

    37. 

    White phosphorus (CAS 12185-10-3);

    38. 

    Yellow phosphorus (CAS 7723-14-0);

    39. 

    Mercury (CAS 7439-97-6);

    40. 

    Barium chloride (CAS 10361-37-2);

    41. 

    Sulphuric acid (CAS 7664-93-9);

    42. 

    3,3-dimethyl-1-butene (CAS 558-37-2);

    43. 

    2,2-dimethylpropanal (CAS 630-19-3);

    44. 

    2,2-dimethylpropylchloride (CAS 753-89-9);

    45. 

    2-methylbutene (CAS 26760-64-5);

    46. 

    2-chloro-3-methylbutane (CAS 631-65-2);

    47. 

    2,3-dimethyl2,3 -butanediol (CAS 76-09-5);

    48. 

    2-methyl-2-butene (CAS 513-35-9);

    49. 

    Butyl lithium (CAS 109-72-8);

    50. 

    Bromo(methyl)magnesium (CAS 75-16-1);

    51. 

    Formaldehyde (CAS 50-00-0);

    52. 

    Diethanolamine (CAS 111-42-2);

    53. 

    Dimethylcarbonate (CAS 616-38-6);

    54. 

    Methyldiethanolamine hydrochloride (CAS 54060-15-0);

    55. 

    Diethylamine hydrochloride (CAS 660-68-4);

    56. 

    Diisopropylamine hydrochloride (CAS 819-79-4);

    57. 

    3-Quinuclidinone hydrochloride (CAS 1193-65-3);

    58. 

    3-Quinuclidinol hydrochloride (CAS 6238-13-7);

    59. 

    (R)-3- Quinuclidinol hydrochloride (CAS 42437-96-7);

    60. 

    N,N-Diethylaminoethanol hydrochloride (CAS 14426-20-1);

    61. 

    Dialkyl(≤C10) chlorophosphates;

    62. 

    Dialkyl(≤C10) fluorophosphates;

    63. 

    N,N-Methylisopropylacetamidine (CAS 1339185-57-7);

    64. 

    N,N-Methylethylacetamidine (CAS 1339632-40-4);

    65. 

    N,N-Ethylisopropylacetamidine (CAS 1339156-10-3);

    66. 

    N,N-Methylpropylacetamidine (CAS 1344238-28-3);

    67. 

    N,N-Ethylpropylacetamidine (CAS 1339737-43-7);

    68. 

    N,N-Isopropylpropylacetamidine (CAS 1341389-98-7);

    69. 

    N,N-Methylethylpropanamidine (CAS 1339424-26-8);

    70. 

    N,N-Ethylisopropylpropanamidine (CAS 1344354-09-1);

    71. 

    N,N-Methylpropylpropanamidine (CAS 1340216-25-2);

    72. 

    N,N-Ethylpropylpropanamidine (CAS 1341493-60-4);

    73. 

    N,N-Isopropylpropylpropanamidine (CAS 1343225-93-3);

    74. 

    N,N-Methylisopropylpropanamidine (CAS 1339042-55-5);

    75. 

    N,N-Methylethylbutanamidine (CAS 1341049-51-1);

    76. 

    N,N-Methylpropylbutanamidine (CAS 1343721-02-7);

    77. 

    N,N-Ethylpropylbutanamidine (CAS 1343806-12-1);

    78. 

    N,N-Isopropylpropylbutanamidine (CAS 1343316-02-8);

    79. 

    N,N-Methylisopropylbutanamidine (CAS 1340219-94-4);

    80. 

    N,N-Ethylisopropylbutanamidine (CAS 1342204-10-7);

    81. 

    N,N-Methylethylisobutanamidine (CAS 1342365-47-2);

    82. 

    N,N-Ethylpropylisobutanamidine (CAS 1342566-58-8);

    83. 

    N,N-Methylpropylisobutanamidine (CAS 1342270-21-6);

    84. 

    N,N-Isopropylpropylisobutanamidine (CAS 1342156-11-9);

    85. 

    N,N-Methylisopropylisobutanamidine (CAS 1341992-96-8);

    86. 

    N,N-Ethylisopropylisobutanamidine (CAS 1339048-76-8);

    87. 

    N,N-Dimethylacetamidine hydrobromide (CAS 1801188-12-4);

    88. 

    N,N-Dimethylacetamidine hydrochloride (CAS 2909-15-1);

    89. 

    N,N-Diethylacetamidine hydrochloride (CAS 91400-32-7);

    90. 

    N,N-Diethylacetamidine hydrobromide (CAS 78053-54-0);

    91. 

    N,N-Dimethylpropanamidine dihydrochloride (CAS 79972-73-9); or

    92. 

    N,N-Dimethylpropanamidine hydrochloride (CAS 56776-15-9).

    X.C.IX.002 Fentanyl and its derivatives Alfentanil, Sufentanil, Remifentanil, Carfentanil, and salts thereof.

    Note : X.C.IX.002 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use.

    X.C.IX.003 Chemical precursors to Central Nervous System Acting Chemicals, as follows:

    a. 

    4-anilino-N-phenethylpiperidine (CAS 21409-26-7); or

    b. 

    N-phenethyl-4-piperidone (CAS 39742-60-4).

    Notes:

    1.   X.C.IX.003 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entry X.C.IX.003 in which no individually specified chemical constitutes more than 1 % by the weight of the mixture.

    2.   X.C.IX.003 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use.

    X.C.IX.004 Fibrous and filamentary materials, not controlled by 1C010 or 1C210 ( 57 ), for use in ‘composite’ structures and with a specific modulus of 3,18 x 106 m or greater and a specific tensile strength of 7,62 x 104 m or greater.

    X.C.IX.005 ‘Vaccines’, ‘immunotoxins’, ‘medical products’, ‘diagnostic and food testing kits’, as follows (see List of Items controlled):

    a. 

    ‘Vaccines’ containing, or designed for use against, items controlled by 1C351, 1C353 or 1C354;

    b. 

    ‘Immunotoxins’ containing items controlled by 1C351.d; or

    c. 

    ‘Medical products’ that contain any of the following:

    1. 

    ‘Toxins’ controlled by 1C351.d (except for botulinum toxins controlled by 1C351.d.1, conotoxins controlled by 1C351.d.3, or items controlled for CW reasons under 1C351.d.4 or .d.5); or

    2. 

    Genetically modified organisms or genetic elements controlled by 1C353.a.3 (except for those that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3);

    d. 

    ‘Medical products’ not controlled by X.C.IX.005.c that contain any of the following:

    1. 

    Botulinum toxins controlled by 1C351.d.1;

    2. 

    Conotoxins controlled by 1C351.d.3; or

    3. 

    Genetically modified organisms or genetic elements controlled by 1C353.a.3 that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3; or

    e. 

    ‘Diagnostic and food testing kits’ containing items controlled by 1C351.d (except for items controlled for CW reasons under 1C351.d.4 or .d.5).

    Technical Notes:

    1.   ‘Medical products’ are: (1) pharmaceutical formulations designed for testing and human (or veterinary) administration in the treatment of medical conditions, (2) pre-packaged for distribution as clinical or medical products, and (3) approved by the European Medicines Agency (EMA) either to be marketed as clinical or medical products or for use as research new drug.

    2.   ‘Diagnostic and food testing kits’ are specifically developed, packaged and marketed for diagnostic or public health purposes. Biological toxins in any other configuration, including bulk shipments, or for any other end-uses are controlled by 1C351.

    X.C.IX.006 Commercial charges and devices containing energetic materials, other than those specified in the CML or in Regulation (EU) 2021/821, and nitrogen trifluoride in a gaseous state (see List of Items Controlled):

    a. 

    Shaped charges specially designed for oil well operations, utilizing one charge functioning along a single axis, that upon detonation produce a hole, and

    1. 

    Contain any formulation of ‘controlled materials’;

    2. 

    Have only a uniform shaped conical liner with an included angle of 90 degrees or less;

    3. 

    Contain more than 0,010 kg but less than or equal to 0,090 kg of ‘controlled materials’; and

    4. 

    Have a diameter not exceeding 114,3 cm;

    b. 

    Shaped charges specially designed for oil well operations containing less than or equal to 0,010 kg of ‘controlled materials’;

    c. 

    Detonation cord or shock tubes containing less than or equal to 0,064 kg/m of ‘controlled materials’;

    d. 

    Cartridge power devices, that contain less than or equal to 0,70 kg of ‘controlled materials’ in the deflagration material;

    e. 

    Detonators (electric or nonelectric) and assemblies thereof, that contain less than or equal to 0,01 kg of ‘controlled materials’;

    f. 

    Igniters, that contain less than or equal to 0,01 kg of ‘controlled materials’;

    g. 

    Oil well cartridges, that contain less than or equal to 0,015 kg of controlled ‘energetic materials’;

    h. 

    Commercial cast or pressed boosters containing less than or equal to 1,0 kg of ‘controlled materials’;

    i. 

    Commercial prefabricated slurries and emulsions containing less than or equal to 10,0 kg and less than or equal to 35 % by weight of ML8 ‘controlled materials’;

    j. 

    Cutters and severing tools containing less than or equal to 3,5 kg of ‘controlled materials’;

    k. 

    Pyrotechnic devices when designed exclusively for commercial purposes (e.g. theatrical stages, motion picture special effects, and fireworks displays) and containing less than or equal to 3,0 kg of ‘controlled materials’;

    l. 

    Other commercial explosive devices and charges not controlled by X.C.IX.006.a through .k containing less than or equal to 1,0 kg of ‘controlled materials’; or

    Note : X.C.IX.006.l includes automotive safety devices; extinguishing systems; cartridges for riveting guns; explosive charges for agricultural, oil and gas operations, sporting goods, commercial mining, or public works purposes; and delay tubes used in the assembly of commercial explosive devices.

    m. 

    Nitrogen trifluoride (NF3) in a gaseous state.

    Notes:

    1.   ‘Controlled materials’ means controlled energetic materials (see 1C011, 1C111, 1C239 or ML8).

    2.   Nitrogen trifluoride when not in a gaseous state is controlled under ML8.d by the CML.

    X.C.IX.007 Mixtures not controlled by 1C350 or 1C450 ( 58 ) that contain chemicals controlled by 1C350 or 1C450 and medical, analytical, diagnostic, and food testing kits not controlled by 1C350 or 1C450 that contain chemicals controlled by 1C350, as follows (see List of Items Controlled):

    a. 

    Mixtures containing the following concentrations of precursor chemicals controlled by 1C350:

    1. 

    Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C350;

    2. 

    Mixtures containing less than 30 %, by weight, of:

    a. 

    Any single CWC Schedule 3 chemical controlled by 1C350; or

    b. 

    Any single non-CWC precursor chemical controlled by 1C350;

    b. 

    Mixtures containing the following concentrations of toxic or precursor chemicals controlled by 1C450:

    1. 

    Mixtures containing the following concentrations of CWC Schedule 2 chemicals controlled by 1C450:

    a. 

    Mixtures containing 1 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.a.1 and a.2 (i.e., mixtures containing Amiton or PFIB); or

    b. 

    Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.b.1, b.2, b.3, b.4, b.5, or b.6;

    2. 

    Mixtures containing less than 30 %, by weight, of any single CWC Schedule 3 chemical controlled by 1C450.a.4, a.5., a.6., a.7, or 1C450.b.8;

    c. 

    ‘Medical, analytical, diagnostic, and food testing kits’ that contain precursor chemicals controlled by 1C350 in an amount not exceeding 300 grams per chemical.

    Technical Note:

    For the purpose of this entry, ‘medical, analytical, diagnostic, and food testing kits’ are pre-packaged materials of defined composition that are specifically developed, packaged and marketed for medical, analytical, diagnostic, or public health purposes. Replacement reagents for medical, analytical, diagnostic, and food testing kits described in X.C.IX.007.c are controlled by 1C350 if the reagents contain at least one of the precursor chemicals identified in that entry in concentrations equal to or greater than the control levels for mixtures indicated in 1C350.

    X.C.IX.008 Non-fluorinated polymeric substances, not controlled by 1C008 ( 59 ), as follows (see List of Items Controlled):

    a. 

    Polyarylene ether ketones, as follows:

    1. 

    Polyether ether ketone (PEEK);

    2. 

    Polyether ketone ketone (PEKK);

    3. 

    Polyether ketone (PEK); or

    4. 

    Polyether ketone ether ketone ketone (PEKEKK);

    b. 

    Not used.

    X.C.IX.009 Specific materials, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

    a. 

    Hardened steel and tungsten carbide precision ball bearings (3 mm or greater diameter);

    b. 

    304 and 316 stainless steel plate, other than those specified in the CML or in Regulation (EU) 2021/821;

    c. 

    Monel plate;

    d. 

    Tributyl phosphate (CAS 126-73-8);

    e. 

    Nitric acid (CAS 7697-37-2) in concentrations of 20 % weight or greater;

    f. 

    Fluorine (CAS 7782-41-4); or

    g. 

    Alpha-emitting radionuclides, other than those specified in the CML or in Regulation (EU) 2021/821.

    X.C.IX.010 Aromatic polyamides (aramids) not controlled by 1C010, 1C210 or X.C.IX.004, presented in any of the following forms (see List of Items Controlled):

    a. 

    Primary forms;

    b. 

    Filament yarn or monofilaments;

    c. 

    Filament tows;

    d. 

    Rovings;

    e. 

    Staple or chopped fibres;

    f. 

    Fabrics;

    g. 

    Pulp or flocks.

    X.C.IX.011 Nanomaterials as follows (see List of Items Controlled):

    a. 

    Semiconductor nanomaterials;

    b. 

    Composite-based nanomaterials; or

    c. 

    Any of the following carbon-based nanomaterials:

    1. 

    Carbon nanotubes;

    2. 

    Carbon nanofibres;

    3. 

    Fullerenes;

    4. 

    Graphenes; or

    5. 

    Carbon onions.

    Notes : For the purpose of X.C.IX.011, nanomaterial means a material that meets at least one of the following criteria:

    1.   Consists of particles, with one or more external dimensions in the size range 1 - 100 nm for more than 1 % of their number size distribution;

    2.   Has internal or surface structures in one or more dimensions in the size range 1 - 100 nm; or

    3.   Has a specific surface area by volume greater than 60 m2/cm3, excluding materials consisting of particles with a size lower than 1 nm.

    X.C.IX.012 Rare-earth metals and compounds, either in organic or inorganic form, including mixtures whether or not intermixed or interalloyed.

    Note 1 : Rare-earth metals and compounds include Scandium, Yttrium, Lanthanum, Cerium, Praseodymium, Neodymium, Promethium, Samarium, Europium, Gadolinium, Terbium, Dysprosium, Holmium, Erbium, Thulium, Ytterbium and Lutetium.

    Note 2 : For the purpose of the control X.C.IX.012 minerals containing rare-earth metals are excluded.

    Note 3 : X.C.IX.012 does not control mixtures in which no individual metal or compound specified in this entry constitutes more than 5 % by the weight of the mixture.

    X.C.IX.013 Tungsten, tungsten carbide and alloys, not controlled by 1C117 or 1C226 ( 60 ), containing more than 90 % tungsten by weight.

    Note 1 : For the purpose of the control X.C.IX.013, wire is excluded.

    Note 2 : For the purpose of the control X.C.IX.013, surgical or medical instruments are excluded.

    X.C.IX.014 Lithium and lithium compounds, as follows:

    a. 

    Lithium (CAS 7439-93-2);

    b. 

    Lithium carbonate (CAS 554-13-2);

    c. 

    Lithium hydroxide (CAS 1310-65-2 and CAS 1310-66-3);

    d. 

    Lithium oxide (CAS 12057-24-8);

    e. 

    Lithium cobalt oxide (CAS 12190-79-3);

    f. 

    Lithium iron phosphate (CAS 15365-14-7);

    g. 

    Lithium manganese oxide (CAS 12057-17-9);

    h. 

    Lithium nickel manganese cobalt oxide (CAS 346417-97-8); or

    i. 

    Lithium titanate (CAS 12031-82-2).

    X.C.IX.015 Ultra-High-Molecular-Weight Polyethylene (UHMWPE), not controlled by 1C010 or 1C210 ( 61 ), presented in any of the following forms:

    a. 

    Primary forms;

    b. 

    Filament yarn or monofilaments;

    c. 

    Filament tows;

    d. 

    Rovings;

    e. 

    Staple or chopped fibres;

    f. 

    Fabrics;

    g. 

    Pulp or flocks.

    X.D.IX.001 Specific ‘software’, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

    a. 

    ‘Software’ specially designed for industrial process control hardware/systems controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821; or

    b. 

    ‘Software’ specially designed for equipment for the production of structural composites, fibres, prepregs and preforms controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821.

    X.E.IX.001 ‘Technology’ for the ‘development’, ‘production’, or ‘use’ of fibrous and filamentary materials controlled by X.C.IX.004 and X.C.IX.010.

    X.E.IX.002 ‘Technology’ for the ‘development’, ‘production’, or ‘use’ of nanomaterials controlled by X.C.IX.011.

    Category X – Materials Processing

    X.A.X.001 Explosives or detonator detection equipment, both bulk and trace based, consisting of an automated device, or combination of devices for automated decision making to detect the presence of different types of explosives, explosive residue, or detonators; and components, other than those specified in the CML or in Regulation (EU) 2021/821:

    a. 

    Explosives detection equipment for ‘automated decision making’ to detect and identify bulk explosives utilizing, but not limited to, X-ray (e.g., computed tomography, dual energy, or coherent scattering), nuclear (e.g., thermal neutron analysis, pulse fast neutron analysis, pulse fast neutron transmission spectroscopy, and gamma resonance absorption), or electromagnetic techniques (e.g., quadropole resonance and dielectrometry);

    b. 

    Not used;

    c. 

    Detonator detection equipment for automated decision making to detect and identify initiation devices (e.g. detonators, blasting caps) utilizing, but not limited to, X-ray (e.g. dual energy or computed tomography) or electromagnetic techniques.

    Note : Explosives or detonation detection equipment in X.A.X.001 includes equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.

    Technical Notes:

    1.   ‘Automated decision making’ is the ability of the equipment to detect explosives or detonators at the design or operator- selected level of sensitivity and provide an automated alarm when explosives or detonators at or above the sensitivity level are detected.

    2.   This entry does not control equipment that depends on operator interpretation of indicators such as inorganic/organic color mapping of the items(s) being scanned.

    3.   Explosives and detonators include commercial charges and devices controlled by X.C.VIII.004 and X.C.IX.006 and energetic materials controlled by 1C011, 1C111 and 1C239 ( 62 ).

    X.A.X.002 Concealed object detection equipment operating in the frequency range from 30 GHz to 3 000  GHz and having a spatial resolution of 0,1 mrad (milliradian) up to and including 1 mrad (milliradian) at a standoff distance of 100 m; and components, other than those specified in the CML or in Regulation (EU) 2021/821.

    Note : Concealed object detection equipment includes but is not limited to equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.

    Technical Note:

    The range of frequencies span what is generally considered as the millimetre-wave, submillimetre-wave and terahertz frequency regions.

    X.A.X.003 Bearings and bearing systems not controlled by 2A001 (see List of Items Controlled):

    a. 

    Ball bearings or Solid ball bearings, having tolerances specified by the manufacturer in accordance with ABEC 7, ABEC 7P, or ABEC 7T or ISO Standard Class 4 or better (or equivalents) and having any of the following characteristics;

    1. 

    Manufactured for use at operating temperatures above 573 K (300 °C) either by using special materials or by special heat treatment; or

    2. 

    With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’;

    b. 

    Solid tapered roller bearings, having tolerances specified by the manufacturer in accordance with ANSI/AFBMA Class 00 (inch) or Class A (metric) or better (or equivalents) and having either of the following characteristics:

    1. 

    With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’; or

    2. 

    Manufactured for use at operating temperatures below 219 K (– 54 °C) or above 423 K (150 °C);

    c. 

    Gas-lubricated foil bearing manufactured for use at operating temperatures of 561 K (288 °C) or higher and a unit load capacity exceeding 1 MPa;

    d. 

    Active magnetic bearing systems;

    e. 

    Fabric-lined self-aligning or fabric-lined journal sliding bearings manufactured for use at operating temperatures below 219 K (– 54 °C) or above 423 K (150 °C).

    Technical Notes:

    1.   ‘DN’ is the product of the bearing bore diameter in mm and the bearing rotational velocity in rpm.

    2.   Operating temperatures include those temperatures obtained when a gas turbine engine has stopped after operation.

    X.A.X.004 Piping, fittings and valves made of, or lined with stainless, copper-nickel alloy or other alloy steel containing 10 % or more nickel and/or chromium:

    a. 

    Pressure tube, pipe, and fittings of 200 mm or more inside diameter, and suitable for operation at pressures of 3,4 MPa or greater;

    b. 

    Pipe valves having all of the following characteristics that are not controlled by 2B350.g ( 63 ):

    1. 

    A pipe size connection of 200 mm or more inside diameter; and

    2. 

    Rated at 10,3 MPa or more.

    Notes:

    1.   See X.D.X.005 for ‘software’ for items controlled under this entry.

    2.   See 2E001 (‘development’), 2E002 (‘production’), and X.E.X.003 (‘use’) for technology for items controlled under this entry.

    3.   See related controls 2A226, 2B350 and X.B.X.010.

    X.A.X.005 Pumps designed to move molten metals by electromagnetic forces.

    Notes:

    1.   See X.D.X.005 for ‘software’ for items controlled under this entry.

    2.   See 2E001 (‘development’), 2E002 (‘production’), and X.E.X.003 (‘use’) for ‘technology’ for items controlled under this entry.

    3.   Pumps for use in liquid-metal-cooled reactors are controlled by 0A001.

    X.A.X.006 ‘Portable electric generators’ and specially designed components.

    Technical Note:

    ‘Portable electric generators’ – The generators that are in X.A.X.006 are portable – 2 268  kg or less on wheels or transportable in a 2,5 tonnes truck without a special set up requirement.

    X.A.X.007 Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

    a. 

    Bellows sealed valves;

    b. 

    Not used.

    X.B.X.001 ‘Continuous flow reactors’ and their ‘modular components’.

    Technical Notes:

    1.   For the purposes of X.B.X.001, ‘continuous flow reactors’ consist in plug and play systems where reactants are continuously fed into the reactor and the resultant product is collected at the outlet.

    2.   For purposes of X.B.X.001, ‘modular components’ are fluidic modules, liquid pumps, valves, packed-bed modules, mixer modules, pressure gauges, liquid-liquid separators, etc.

    X.B.X.002 Nucleic acid assemblers and synthesizers not controlled by 2B352.i, which are partly or entirely automated, and designed to generate nucleic acids greater than 50 bases.

    X.B.X.003 Automated peptide synthesizers capable to work under controlled atmosphere conditions.

    X.B.X.004 Numerical control units for machine tools and ‘numerically controlled’ machine tools, other than those specified in the CML or in Regulation (EU) 2021/821 (see List of Items Controlled):

    a. 

    ‘Numerical control’ units for machine tools:

    1. 

    Having four interpolating axes that can be coordinated simultaneously for contouring control; or

    2. 

    Having two or more axes that can be coordinated simultaneously for contouring control and a minimum programmable increment better (less) than 0,001 mm;

    3. 

    ‘Numerical control’ units for machine tools having two, three or four interpolating axes that can be coordinated simultaneously for contouring control, and capable of receiving directly (on-line) and processing computer-aided-design (CAD) data for internal preparation of machine instructions; or

    b. 

    Motion control boards specially designed for machine tools and having any of the following characteristics:

    1. 

    Interpolation in more than four axes;

    2. 

    Capable of real-time processing of data to modify tool path, feed rate and spindle data, during the machining operation, by any of the following:

    a. 

    Automatic calculation and modification of part program data for machining in two or more axes by means of measuring cycles and access to source data; or

    b. 

    Adaptive control with more than one physical variable measured and processed by means of a computing model (strategy) to change one or more machining instructions to optimize the process; or

    3. 

    Capable of receiving and processing CAD data for internal preparation of machine instructions;

    c. 

    ‘Numerically controlled’ machine tools that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes and that have both of the following characteristics:

    1. 

    Two or more axes that can be coordinated simultaneously for contouring control; and

    2. 

    Positioning accuracies according to ISO 230/2 (2006), with all compensations available:

    a. 

    Better than 15 μm along any linear axis (overall positioning) for grinding machines;

    b. 

    Better than 15 μm along any linear axis (overall positioning) for milling machines; or

    c. 

    Better than 15 μm along any linear axis (overall positioning) for turning machines; or

    d. 

    Machine tools, as follows, for removing or cutting metals, ceramics or composites, that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes:

    1. 

    Machine tools for turning, grinding, milling or any combination thereof, having two or more axes that can be coordinated simultaneously for contouring control and having any of the following characteristics:

    a. 

    One or more contouring ‘tilting spindles’;

    Note : X.B.X.004.d.1.a. applies to machine tools for grinding or milling only.

    b. 

    ‘Camming’ (axial displacement) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);

    Note : X.B.X.004.d.1.b. applies to machine tools for turning only.

    c. 

    ‘Run-out’ (out-of-true running) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); or

    d. 

    The positioning accuracies, with all compensations available, are less (better) than: 0,001° on any rotary axis;

    2. 

    Electrical discharge machines (EDM) of the wire feed type that have five or more axes that can be coordinated simultaneously for contouring control.

    X.B.X.005 Non-‘numerically controlled’ machine tools for generating optical quality surfaces, (see List of Items Controlled) and specially designed components therefor:

    a. 

    Turning machines using a single point cutting tool and having all of the following characteristics:

    1. 

    Slide positioning accuracy less (better) than 0,0005 mm per 300 mm of travel;

    2. 

    Bidirectional slide positioning repeatability less (better) than 0,00025 mm per 300 mm of travel;

    3. 

    Spindle ‘run-out’ and ‘camming’ less (better) than 0,0004 mm total indicator reading (TIR);

    4. 

    Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and

    5. 

    Slide perpendicularity less (better) than 0,001 mm per 300 mm of travel;

    Technical Note:

    The bidirectional slide positioning repeatability (R) of an axis is the maximum value of the repeatability of positioning at any position along or around the axis determined using the procedure and under the conditions specified in part 2.11 of ISO 230/2: 1988.

    b. 

    Fly cutting machines having all of the following characteristics:

    1. 

    Spindle ‘run-out’ and ‘camming’ less (better) than 0,0004 mm TIR; and

    2. 

    Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel.

    X.B.X.006 Gearmaking and/or finishing machinery not controlled by 2B003 capable of producing gears to a quality level of better than AGMA 11.

    X.B.X.007 Dimensional inspection or measuring systems or equipment not controlled by 2B006 or 2B206, as follows (see List of Items Controlled):

    a. 

    Manual dimensional inspection machines, having both of the following characteristics:

    1. 

    Two or more axes; and

    2. 

    A measurement uncertainty equal to or less (better) than (3 + L/300) μm in any axes (L measured length in mm).

    X.B.X.008 ‘Robots’ not controlled by 2B007 or 2B207 that are capable of employing feedback information in real-time processing from one or more sensors to generate or modify programs or to generate or modify numerical program data.

    X.B.X.009 Assemblies, circuit boards or inserts specially designed for machine tools controlled by X.B.X.004, or for equipment controlled by X.B.X.006, X.B.X.007 or X.B.X.008:

    a. 

    Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);

    b. 

    Single point diamond cutting tool inserts, having all of the following characteristics:

    1. 

    Flawless and chip-free cutting edge when magnified 400 times in any direction;

    2. 

    Cutting radius from 0,1 to 5 mm inclusive; and

    3. 

    Cutting radius out-of-roundness less (better) than 0,002 mm TIR.

    c. 

    Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in X.B.X.004, X.B.X.006, X.B.X.007, X.B.X.008, or X.B.X.009.

    Technical Note:

    This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.

    X.B.X.010 Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

    a. 

    Isostatic presses, other than those specified in the CML or in Regulation (EU) 2021/821;

    b. 

    Bellows manufacturing equipment, including hydraulic forming equipment and bellows forming dies;

    c. 

    Laser welding machines;

    d. 

    MIG welders;

    e. 

    E-beam welders;

    f. 

    Monel equipment, including valves, piping, tanks and vessels;

    g. 

    304 and 316 stainless steel valves, piping, tanks and vessels;

    Note : Fittings are considered part of piping for purposes of X.B.X.010.g.

    h. 

    Mining and drilling equipment, as follows:

    1. 

    Large boring equipment capable of drilling holes greater than 61 cm in diameter;

    2. 

    Large earth-moving equipment used in the mining industry;

    i. 

    Electroplating equipment designed for coating parts with nickel or aluminium;

    j. 

    Pumps designed for industrial service and for use with an electrical motor of 5 HP or greater;

    k. 

    Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service, other than those specified in the CML or in Regulation (EU) 2021/821;

    l. 

    Spin forming and flow forming machines, other than those specified in the CML or in Regulation (EU) 2021/821;

    m. 

    Centrifugal multiplane balancing machines, other than those specified in the CML or in Regulation (EU) 2021/821; or

    n. 

    Austenitic stainless steel plate, valves, piping, tanks and vessels.

    X.B.X.011 Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2,5 metres.

    X.B.X.012 Class II biosafety cabinets and glove boxes.

    X.B.X.013 Batch centrifuges with a rotor capacity of 4 litres or greater, usable with biological materials.

    X.B.X.014 Fermenters with an internal volume of 10–20 litres, usable with biological materials.

    X.B.X.015 Reaction vessels, reactors, agitators, heat exchangers, condensers, pumps (including single seal pumps), valves, storage tanks, containers, receivers, and distillation or absorption columns that meet performance parameters of the control 2B350 ( 64 ), regardless of their materials of construction.

    Note : For the purpose of the control X.B.X.015, plumbing valves and storage tanks with total internal (geometric) volume less than 1 m3 (1 000 litres) designed for domestic water or gas systems are excluded.

    X.B.X.016 Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that may be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities.

    X.B.X.017 Vacuum pumps with a manufacturer’s specified maximum flow-rate greater than 1 m3/h (under standard temperature and pressure conditions), casings (pump bodies), preformed casing-liners, impellers, rotors, and jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemicals being processed are made from controlled materials.

    X.B.X.018 Laboratory equipment, including parts and accessories for such equipment, for the analysis or detection, destructive or non-destructive, of chemical substances.

    X.B.X.019 Whole chlor-alkali electrolysis cells – mercury, diaphragm, and membrane.

    X.B.X.020 Titanium electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells.

    X.B.X.021 Nickel electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells.

    X.B.X.022 Bipolar titanium nickel electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells.

    X.B.X.023 Asbestos diaphragms specially designed for use in chlor-alkali cells.

    X.B.X.024 Fluoropolymer based diaphragms specially designed for use in chlor-alkali cells.

    X.B.X.025 Fluoropolymer based ion exchange membranes specially designed for use in chlor-alkali cells.

    X.B.X.026 Compressors specially designed to compress wet or dry chlorine, regardless of material of construction.

    X.B.X.027 Microwave reactors – Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature such as heating.

    X.D.X.001 ‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.X.001.

    X.D.X.002 ‘Software’‘required’ for the ‘development’, ‘production’ or ‘use’ of concealed object detection equipment controlled by X.A.X.002.

    X.D.X.003 ‘Software’ specially designed for the ‘development’, ‘production’, or ‘use’ of equipment controlled by X.B.X.004, X.B.X.006, or X.B.X.007, X.B.X.008, and X.B.X.009.

    X.D.X.004 Specific ‘software’, as follows (see List of Items Controlled):

    a. 

    ‘Software’ to provide adaptive control and having both of the following characteristics:

    1. 

    For flexible manufacturing units (FMUs); and

    2. 

    Capable of generating or modifying, in real-time processing, programs or data by using the signals obtained simultaneously by means of at least two detection techniques, such as:

    a. 

    Machine vision (optical ranging);

    b. 

    Infrared imaging;

    c. 

    Acoustical imaging (acoustical ranging);

    d. 

    Tactile measurement;

    e. 

    Inertial positioning;

    f. 

    Force measurement; and

    g. 

    Torque measurement.

    Note : X.D.X.004.a does not control ‘software’ which only provides rescheduling of functionally identical equipment within ‘flexible manufacturing units’ using pre-stored part programs and a pre-stored strategy for the distribution of the part programs.

    b. 

    Not used.

    X.D.X.005 ‘Software’ specially designed or modified for the ‘development,’‘production,’ or ‘use’ of items controlled by X.A.X.004 or X.A.X.005.

    Note : See 2E001 (‘development’) for ‘technology’ for ‘software’ controlled under this entry.

    X.D.X.006 ‘Software’ specially designed for the ‘development’ or ‘production’ of portable electric generators controlled by X.A.X.006.

    X.E.X.001 ‘Technology’‘required’ for the ‘development,’‘production’ or ‘use’ of equipment controlled by X.A.X.002 or ‘required’ for the ‘development’ of ‘software’ controlled by X.D.X.002.

    Note : See X.A.X.002 and X.D.X.002 for related commodity and ‘software’ controls.

    X.E.X.002 ‘Technology’ for the ‘use’ of equipment controlled by X.B.X.004, X.B.X.006, X.B.X.007, or X.B.X.008.

    X.E.X.003 ‘Technology’ according to the General Technology Note for the ‘use’ of equipment controlled by X.A.X.004 or X.A.X.005.

    X.E.X.004 ‘Technology’ for the ‘use’ of portable electric generators controlled by X.A.X.006.

    ▼M28

    Part B

    1.   Semiconductor devices



    CN Code

    Description

    8541 10

    Diodes, other than photosensitive or light-emitting diodes (LED)

    8541 21

    Transistors, other than photosensitive transistors with a dissipation rate of less than 1 W

    8541 29

    Other transistors, other than photosensitive transistors

    8541 30

    Thyristors, diacs and triacs (excl. photosensitive semiconductor devices)

    8541 49

    Photosensitive semiconductor devices (excl. Photovoltaic generators and cells)

    8541 51

    Other semiconductor devices: Semiconductor-based transducers

    8541 59

    Other semiconductor devices

    8541 60

    Mounted piezo-electric crystals

    8541 90

    Semiconductor devices: Parts

    2.   Electronic integrated circuits, manufacturing and testing equipment



    CN Code

    Description

    3818 00

    Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics

    8486 10

    Machines and apparatus for the manufacture of boules or wafers

    8486 20

    Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits

    8486 40

    Machines and apparatus specified in note 11(C) to this chapter

    8534 00

    Printed circuits

    8537 10

    Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517 , for a voltage not exceeding 1 000 V

    8542 31

    Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits

    8542 32

    Memories

    8542 33

    Amplifiers

    8542 39

    Other Electronic Integrated Circuits

    8542 90

    Electronic integrated circuits: Parts

    8543 20

    Signal generators

    9027 50

    Other instruments and apparatus using optical radiation (UV, visible, IR)

    9030 20

    Oscilloscopes and oscillographs

    9030 32

    Multimeters with recording device

    9030 39

    Instruments and apparatus for measuring or checking voltage, current, resistance or electrical power, with recording device

    9030 82

    Instruments and apparatus for measuring or checking semiconductor wafers or devices

    3.   Photographic cameras, sensors and optical components



    CN Code

    Description

    8525 89

    Other television cameras, digital cameras and video camera recorders

    8529 90

    Other parts suitable for use solely or principally with the apparatus of headings 8524 to 8528

    9006 30

    Cameras specially designed for underwater use, for aerial survey or for medical or surgical examination of internal organs; comparison cameras for forensic or criminological purposes

    9013 10

    Telescopic sights for fitting to arms; periscopes; telescopes designed to form parts of machines, appliances, instruments or apparatus of this chapter or Section XVI

    9013 80

    Other optical devices, appliances and instruments

    9025 19

    Other thermometers and pyrometers, not combined with other instruments

    9032 10

    Thermostats

    4.   Other electrical/magnetic components



    CN Code

    Description

    8501 32

    DC motors and DC generators of an output exceeding 750 W but not exceeding 75 kW (excluding photovoltaic generators)

    8504 31

    Transformers having a power handling capacity not exceeding 1 kVA (excluding liquid dielectric transformers)

    8504 40

    Static converters

    8505 11

    Permanent magnets and articles intended to become permanent magnets after magnetisation; of metal

    8529 10

    Aerials and aerial reflectors of all kinds; parts suitable for use therewith

    8532 21

    Other fixed capacitors of tantalum

    8532 22

    Aluminium electrolytic fixed electrical capacitors (excluding power capacitors)

    8532 24

    Ceramic dielectric multilayer capacitors

    8533 21

    Fixed electrical resistors for a power handling capacity not exceeding 20 W (excluding heating resistors, and fixed carbon resistors)

    8533 40

    Electrical variable resistors, including rheostats and potentiometers (excluding wirewound variable resistors and heating resistors)

    8536 41

    Relays, for a voltage not exceeding 60 V

    8536 49

    Relays for a voltage exceeding 60 V but not exceeding 1 000 V

    8536 50

    Other switches

    8536 69

    Plugs and sockets

    8536 90

    Other apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables

    8548 00

    Electrical parts of machinery or apparatus, not specified or included elsewhere in Chapter 85

    5.   Machine tools, additive manufacturing equipment, and related items



    CN Code

    Description

    8205 59 80

    Hand tools, including glaziers’ diamonds, excluding household tools, and tool for masons, moulders, cement workers, plasterers and painters

    8456 11

    Machine tools for working any material by removal of material, operated by laser

    8457 10

    Machining centres for working metal

    8458 11

    Horizontal lathes, including turning centres, for removing metal, numerically controlled

    8466 10

    Tool holders, for any type of tool for working in the hand and for machine tools; self-opening dieheads

    8485 20

    Machines for additive manufacturing by plastics or rubber deposit

    8485 30

    Machines for additive manufacturing by plaster, cement, ceramics or glass deposit

    8485 90

    Parts of machines for additive manufacturing

    6.   Energetic materials and precursors



    CN Code

    Description

    2829 90

    Perchlorates; bromates and perbromates; iodates and periodates

    4706 10

    Pulps of fibres derived from recovered (waste and scrap) paper or paperboard or of other fibrous cellulosic material: Cotton linters pulp

    7.   Electronic devices, modules and assemblies



    CN Code

    Description

    8471 50

    Processing units other than those of subheading 8471 41 or 8471 49 , whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units

    8471 70 98

    Other storage units

    8471 80

    Units for automatic data-processing machines (excl. processing units, input or output units and storage units)

    8517 62

    Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus

    8517 69

    Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network

    8517 79

    Parts of telephone sets, telephones for cellular networks or for other wireless networks and of other apparatus for the transmission or reception of voice, images or other data, excluding aerials and aerial reflectors of all kinds and their parts

    8526 91

    Radio navigational aid apparatus

    9014 20

    Instruments and appliances for aeronautical or space navigation (other than compasses)

    9014 80

    Other navigational instruments and appliances

    8.   Chemicals, metals, alloys, composites and other advanced materials



    CN Code

    Description

    8112 41

    Unwrought rhenium and rhenium waste, scrap and powders

    8112 49

    Rhenium, other than unwrought, waste, scrap and powders

    9.   Machinery parts, assemblies and components



    CN Code

    Description

    8482 10

    Ball bearings

    8482 20

    Tapered roller bearings, including cone and tapered roller assemblies

    8482 30

    Spherical roller bearings

    8482 50

    Other cylindrical roller bearings, including cage and roller assemblies

    ▼M24




    ANNEX VIII

    List of partner countries referred to in Articles 2(4), 2a(4), 2d(4), 3h(3), 3k(4) and 5n(7)

    THE UNITED STATES OF AMERICA
    JAPAN
    UNITED KINGDOM
    SOUTH KOREA
    AUSTRALIA
    CANADA
    NEW ZEALAND
    NORWAY

    ▼M25

    SWITZERLAND

    ▼M16




    ANNEX IX

    A.   Model for supply, transfer or export notification, application and authorisation forms

    (referred to in Article 2c of this Regulation)

    The export authorisation is valid in all Member States of the European Union until its expiry date.

    image

    image

    image

    image

    image

    A.   Model for brokering services/ technical assistance notification, application and authorisation forms

    (referred to in Article 2C of this Regulation)

    image

    image

    image

    ▼M20

    C.   Model for sale, supply or transfer notification, application and authorisation forms

    (referred to in Article 12b(1) of this Regulation)

    The export authorisation is valid in all Member States of the European Union until its expiry date.

    image

    image

    image

    image

    ▼M16




    ANNEX X

    List of goods and technologies referred to in Article 3b(1)



     

    CN

    Produkt

    ex

    8414 10 81

    Cryogenic pumps in the LNG-process

    ex

    8418 69 00

    Process units for gas cooling in the LNG-process

    ex

    8419 40 00

    Atmospheric-vacuum crude distillation units (CDU)

    ex

    8419 40 00

    Process units for the separation and fractionation of the hydrocarbons in the LNG-process

    ex

    8419 50 20 , 8419 50 80

    Cold boxes in the LNG-process

    ex

    8419 50 20 , 8419 50 80

    Cryogenic exchangers in the LNG-process

    ex

    8419 60 00

    Process units for the liquefaction of the natural gas

    ex

    8419 60 00 , 8419 89 98 , 8421 39 15 , 8421 39 25 , 8421 39 35 , 8421 39 85

    Hydrogen recovery and purification technology

    ex

    8419 60 00 , 8419 89 98 , 8421 39 35 , 8421 39 85

    Refinery fuel gas treatment and sulphur recovery technology (including amine scrubbing units, sulphur recovery units, tail gas treatment units)

    ex

    8419 89 10

    Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water, designed to be used with the technology listed in this Annex.

    ex

    8419 89 98

    Alkylation and isomerization units

    ex

    8419 89 98

    Aromatic hydrocarbon production units

    ex

    8419 89 98

    Catalytic reforming / cracker units

    ex

    8419 89 98

    Delayed cokers

    ex

    8419 89 98

    Flexicoking units

    ex

    8419 89 98

    Hydrocracking reactors

    ex

    8419 89 98

    Hydrocracking reactor vessels

    ex

    8419 89 98

    Hydrogen generation technology

    ex

    8419 89 98

    Hydrotreatment technology/units

    ex

    8419 89 98

    Naphtha isomerisation units

    ex

    8419 89 98

    Polymerisation units

    ex

    8419 89 98

    Sulphur production units

    ex

    8419 89 98

    Sulphuric acid alkylation and sulphuric acid regeneration units

    ex

    8419 89 98

    Thermal cracking units

    ex

    8419 89 98

    [Toluene and heavy aromatics] Transalkylation units

    ex

    8419 89 98

    Visbreakers

    ex

    8419 89 98

    Vacuum gas oil hydrocracking units

    ex

    8479 89 97

    Solvent de-asphalting units

    ▼M20




    ANNEX XI

    List of goods and technologies referred to in Article 3c(1)

    Part A



    CN Code

    Description

    88

    Aircraft, spacecraft, and parts thereof

    List of goods and technologies referred to in Article 3c(1)

    Part B



    CN Code

    Description

    ex 2710 19 83

    Hydraulic oils for the usage in vehicles of Chapter 88

    ex 2710 19 99

    Other lubricating oils and other oils for use in aviation

    4011 30 00

    New pneumatic tyres of rubber, of a kind used on aircraft

    ex 6813 20 00

    Brake discs and pads for use on aircraft

    6813 81 00

    Brake linings and pads

    8517 71 00

    Aerials and aerial reflectors of all kinds; parts suitable for use therewith

    ex 8517 79 00

    Other parts related to aerials

    9024 10 00

    Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials: Machines and appliances for testing metals

    9026 00 00

    Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading9014 , 9015 , 9028 or 9032

    List of goods and technologies referred to in Article 3c(1)

    Part C



    CN Code

    Description

    8407 10

    Spark-ignition reciprocating or rotary internal combustion piston engine, for aircraft

    8409 10

    Parts suitable for use solely or principally with internal combustion piston engine for aircraft

    ▼M24

    List of goods and technologies referred to in Article 3c(1)

    Part D



    CN Code

    Description

    8411 11

    turbojets of a thrust <= 25 kn

    8411 12

    turbojets of a thrust > 25 kn

    8411 21

    turbopropellers of a power <= 1 100 kw

    8411 22

    turbopropellers of a power > 1 100 kw

    8411 91

    parts of turbojets or turbopropellers, n.e.s.

    ▼M7




    ANNEX XII

    ▼M15

    List of legal persons, entities and bodies referred to in Article 5(2)

    ▼M7

    Alfa Bank;
    Bank Otkritie;
    Bank Rossiya; and
    Promsvyazbank




    ANNEX XIII

    List of legal persons, entities and bodies referred to in Article 5(4)(a)

    Almaz-Antey;
    Kamaz;
    Novorossiysk Commercial Sea Port;
    Rostec (Russian Technologies State Corporation);
    Russian Railways;
    JSC PO Sevmash;
    Sovcomflot; and
    United Shipbuilding Corporation

    ▼M11

    Russian Maritime Register of Shipping

    ▼M15




    ANNEX XIV

    List of legal persons, entities and bodies referred to in article 5h



    Name of the legal person, entity or body

    Date of application

    Bank Otkritie

    12 March 2022

    Novikombank

    12 March 2022

    Promsvyazbank

    12 March 2022

    Bank Rossiya

    12 March 2022

    Sovcombank

    12 March 2022

    VNESHECONOMBANK (VEB)

    12 March 2022

    VTB BANK

    12 March 2022

    Sberbank

    14 June 2022

    Credit Bank of Moscow

    14 June 2022

    Joint Stock Company Russian Agricultural Bank, JSC Rosselkhozbank

    14 June 2022

    ▼M10




    ANNEX XV

    List of legal persons, entities or bodies referred to in article 2f

    RT- Russia Today English
    RT- Russia Today UK
    RT - Russia Today Germany
    RT - Russia Today France
    RT- Russia Today Spanish
    Sputnik

    ▼M15

    Rossiya RTR / RTR Planeta
    Rossiya 24 / Russia 24
    TV Centre International

    ▼M20

    NTV/NTV Mir
    Rossiya 1
    REN TV
    Pervyi Kanal

    ▼M24

    RT Arabic
    Sputnik Arabic

    ▼M25

    RT Balkan
    Oriental Review
    Tsargrad
    New Eastern Outlook
    Katehon

    ▼M11




    ANNEX XVI

    List of goods and technology referred to in article 3f

    Category VI – Marine

    X.A.VI.001 

    Vessels, marine systems or equipment, and specially designed components therefor, components and accessories:

    (a) 

    Equipment contained in chapter 4 (navigation equipment) of the applicable Commission Implementing Regulation on design, construction and performance requirements and testing standards for marine equipment adopted in accordance with Article 35(2) of Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment;

    (b) 

    Equipment contained in chapter 5 (radio-communication equipment) of the applicable Commission Implementing Regulation on design, construction and performance requirements and testing standards for marine equipment adopted in accordance with Article 35(2) of Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment;

    ▼M25




    ANNEX XVII

    List of iron and steel products referred to in Article 3g



    CN Code

    Description

    7206

    iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203 )

    7207

    semi-finished products of iron or non-alloy steel

    7208

    flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated

    7209

    flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled ‘cold-reduced’, not clad, plated or coated

    7210

    flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad, plated or coated

    7211

    flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, not clad, plated or coated

    7212

    flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad, plated or coated

    7213

    bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils

    7214

    bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)

    7215

    bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s.

    7216

    angles, shapes and sections of iron or non-alloy steel, n.e.s.

    7217

    wire of iron or non-alloy steel, in coils (excl. bars and rods)

    7218

    stainless steel in ingots or other primary forms; semi-finished products of stainless steel

    7219

    flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’

    7220

    flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’

    7221

    bars and rods of stainless steel, hot-rolled, in irregularly wound coils

    7222

    other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s.

    7223

    wire of stainless steel, in coils (excl. bars and rods)

    7224

    steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless

    7225

    flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’

    7226

    flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’

    7227

    bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils

    7228

    other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel

    7229

    wire of alloy steel other than stainless, in coils (excl. bars and rods)

    7301

    sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel

    7302

    railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers ‘cross-ties’, fish-plates, chairs, chair wedges, sole plates ‘base plates’, rail clips, bedplates, ties and other material specialised for jointing or fixing rails

    7303

    tubes, pipes and hollow profiles, of cast iron

    7304

    tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)

    7305

    tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel ‘e.g., welded, riveted or similarly closed’

    7306

    tubes, pipes and hollow profiles ‘e.g., open seam or welded, riveted or similarly closed’, of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm)

    7307

    tube or pipe fittings ‘e.g. couplings, elbows, sleeves’, of iron or steel

    7308

    structures and parts of structures ‘e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns’, of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406 )

    7309

    reservoirs, tanks, vats and similar containers, of iron or steel, for any material ‘other than compressed or liquefied gas’, of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport)

    7310

    tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material ‘other than compressed or liquefied gas’, of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s.

    7311

    containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport)

    7312

    stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel (excl. electrically insulated products and twisted fencing wire and barbed wire)

    7313

    barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel

    7314

    cloth, incl. endless bands, grill, netting and fencing, of iron or steel wire, expanded metal of iron or steel (excl. woven products of metal fibres of a kind used for cladding, lining or similar purposes)

    7315

    chain and parts thereof, or iron or steel (excl. watch chains, necklace chains and the like, cutting and saw chain, skid chain, scraper chain for conveyors, toothed chain for textile machinery and the like, safety devices with chains for securing doors, measuring chains)

    7316

    anchors, grapnels and parts thereof, of iron or steel

    7317

    nails, tacks, drawing pins, corrugated nails, staples and similar articles of iron or steel, whether or not with heads of other material (excl. such articles with heads of copper and staples in strips)

    7318

    screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded)

    7319

    sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, n.e.s.

    7320

    springs and leaves for springs, of iron or steel (excl. clock and watch springs, springs for sticks and handles of umbrellas or parasols, shock absorbers and torque rod or torsion bar springs of section 17)

    7321

    stoves, ranges, grates, cookers, incl. those with subsidiary boilers for central heating, barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof of iron or steel (excl. boilers and radiators for central heating, geysers and hot water cylinders)

    7322

    radiators for central heating, not-electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air), not-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel

    7323

    table, kitchen or other household articles, and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel (excl. cans, boxes and similar containers of heading 7310 ; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215 ; ornamental articles; sanitary ware)

    7324

    sanitary ware, and parts thereof, of iron or steel (excl. cans, boxes and similar containers of heading 7310 , small wall cabinets for medical supplies or toiletries and other furniture of chapter 94, and fittings)

    7325

    articles of iron or steel, cast, n.e.s.

    7326

    articles of iron or steel, n.e.s. (excl. cast articles)




    ANNEX XVIII

    List of luxury goods referred to in Article 3h

    EXPLANATORY NOTE

    The nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.

    (1)   Horses



    ex

    0101 21 00

    Pure-bred breeding animals

    ex

    0101 29 90

    Other

    (2)   Caviar and caviar substitutes



    ex

    1604 31 00

    Caviar

    ex

    1604 32 00

    Caviar substitutes

    (3)   Truffles and preparations thereof



    ex

    0709 56 00

    Truffles

    ex

    0710 80 69

    Other

    ex

    0711 59 00

    Other

    ex

    0712 39 00

    Other

    ex

    2001 90 97

    Other

    ex

    2003 90 10

    Truffles

    ex

    2103 90 90

    Other

    ex

    2104 10 00

    Soups and broths and preparations therefor

    ex

    2104 20 00

    Homogenised composite food preparations

    ex

    2106 00 00

    Food preparations not elsewhere specified or included

    (4)   Wines (including sparkling wines), beers, spirits and spirituous beverages



    ex

    2203 00 00

    Beer made from malt

    ex

    2204 10 11

    Champagne

    ex

    2204 10 91

    Asti spumante

    ex

    2204 10 93

    Other

    ex

    2204 10 94

    With a protected geographical indication (PGI)

    ex

    2204 10 96

    Other varietal wines

    ex

    2204 10 98

    Other

    ex

    2204 21 00

    In containers holding 2 litres or less

    ex

    2204 29 00

    Other

    ex

    2205 00 00

    Vermouth and other wine of fresh grapes flavoured with plants or aromatic substances

    ex

    2206 00 00

    Other fermented beverages (for example, cider, perry, mead, saké); mixtures of fermented beverages and mixtures of fermented beverages with non-alcoholic beverages, not elsewhere specified or included

    ex

    2207 10 00

    Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol or higher

    ex

    2208 00 00

    Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages

    (5)   Cigars and cigarillos



    ex

    2402 10 00

    Cigars, cheroots and cigarillos, containing tobacco

    ex

    2402 90 00

    Other

    (6)   Perfumes, toilet waters and cosmetics, including beauty and make-up products



    ex

    3303

    Perfumes and toilet waters

    ex

    3304 00 00

    Beauty or make-up preparations and preparations for the care of the skin (other than medicaments), including sunscreen or suntan preparations; manicure or pedicure preparations

    ex

    3305 00 00

    Preparations for use on the hair

    ex

    3307 00 00

    Pre-shave, shaving or aftershave preparations, personal deodorants, bath preparations, depilatories and other perfumery, cosmetic or toilet preparations, not elsewhere specified or included; prepared room deodorisers, whether or not perfumed or having disinfectant properties

    ex

    6704 00 00

    Wigs, false beards, eyebrows and eyelashes, switches and the like, of human or animal hair or of textile materials; articles of human hair not elsewhere specified or included

    (7)   Leather, saddlery and travel goods, handbags and similar articles



    ex

    4201 00 00

    Saddlery and harness for any animal (including traces, leads, knee pads, muzzles, saddle-cloths, saddlebags, dog coats and the like), of any material

    ex

    4202 00 00

    Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverages bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarette-cases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper

    ex

    4205 00 90

    Other

    ex

    9605 00 00

    Travel sets for personal toilet, sewing or shoe or clothes cleaning

    (8)   Coats, or other garments, clothing accessories and shoes (regardless of their material)



    ex

    4203 00 00

    Articles of apparel and clothing accessories, of leather or of composition leather

    ex

    4303 00 00

    Articles of apparel, clothing accessories and other articles of furskin

    ex

    6101 00 00

    Men’s or boys’ overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6103

    ex

    6102 00 00

    Women’s or girls’ overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6104

    ex

    6103 00 00

    Men’s or boys’ suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted

    ex

    6104 00 00

    Women’s or girls’ suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted

    ex

    6105 00 00

    Men’s or boys’ shirts, knitted or crocheted

    ex

    6106 00 00

    Women’s or girls’ blouses, shirts and shirt-blouses, knitted or crocheted

    ex

    6107 00 00

    Men’s or boys’ underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles, knitted or crocheted

    ex

    6108 00 00

    Women’s or girls’ slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles, knitted or crocheted

    ex

    6109 00 00

    T-shirts, singlets and other vests, knitted or crocheted

    ex

    6110 00 00

    Jerseys, pullovers, cardigans, waistcoats and similar articles, knitted or crocheted

    ex

    6111 00 00

    Babies’ garments and clothing accessories, knitted or crocheted

    ex

    6112 11 00

    Of cotton

    ex

    6112 12 00

    Of synthetic fibres

    ex

    6112 19 00

    Of other textile materials

    ex

    6112 20 00

    Ski suits

    ex

    6112 31 00

    Of synthetic fibres

    ex

    6112 39 00

    Of other textile materials

    ex

    6112 41 00

    Of synthetic fibres

    ex

    6112 49 00

    Of other textile materials

    ex

    6113 00 10

    Of knitted or crocheted fabrics of heading 5906

    ex

    6113 00 90

    Other

    ex

    6114 00 00

    Other garments, knitted or crocheted

    ex

    6115 00 00

    Pantyhose, tights, stockings, socks and other hosiery, including graduated compression hosiery (for example, stockings for varicose veins) and footwear without applied soles, knitted or crocheted

    ex

    6116 00 00

    Gloves, mittens and mitts, knitted or crocheted

    ex

    6117 00 00

    Other made-up clothing accessories, knitted or crocheted; knitted or crocheted parts of garments or of clothing accessories

    ex

    6201 00 00

    Men’s or boys’ overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6203

    ex

    6202 00 00

    Women’s or girls’ overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6204

    ex

    6203 00 00

    Men’s or boys’ suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear)

    ex

    6204 00 00

    Women’s or girls. suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear)

    ex

    6205 00 00

    Men’s or boys’ shirts

    ex

    6206 00 00

    Women’s or girls’ blouses, shirts and shirt-blouses

    ex

    6207 00 00

    Men’s or boys’ singlets and other vests, underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles

    ex

    6208 00 00

    Women’s or girls’ singlets and other vests, slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles

    ex

    6209 00 00

    Babies’ garments and clothing accessories

    ex

    6210 10 00

    Of fabrics of heading 5602 or 5603

    ex

    6210 20 00

    Other garments, of the type described in subheadings 6201 11 to 6201 19

    ex

    6210 30 00

    Other garments, of the type described in subheadings 6202 11 to 6202 19

    ex

    6210 40 00

    Other men’s or boys’ garments

    ex

    6210 50 00

    Other women’s or girls’ garments

    ex

    6211 11 00

    Men’s or boys’

    ex

    6211 12 00

    Women’s or girls’

    ex

    6211 20 00

    Ski suits

    ex

    6211 32 00

    Of cotton

    ex

    6211 33 00

    Of man-made fibres

    ex

    6211 39 00

    Of other textile materials

    ex

    6211 42 00

    Of cotton

    ex

    6211 43 00

    Of man-made fibres

    ex

    6211 49 00

    Of other textile materials

    ex

    6212 00 00

    Brassières, girdles, corsets, braces, suspenders, garters and similar articles and parts thereof, whether or not knitted or crocheted

    ex

    6213 00 00

    Handkerchiefs

    ex

    6214 00 00

    Shawls, scarves, mufflers, mantillas, veils and the like

    ex

    6215 00 00

    Ties, bow ties and cravats

    ex

    6216 00 00

    Gloves, mittens and mitts

    ex

    6217 00 00

    Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212

    ex

    6401 00 00

    Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes

    ex

    6402 20 00

    Footwear with upper straps or thongs assembled to the sole by means of plugs

    ex

    6402 91 00

    Covering the ankle

    ex

    6402 99 00

    Other

    ex

    6403 19 00

    Other

    ex

    6403 20 00

    Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe

    ex

    6403 40 00

    Other footwear, incorporating a protective metal toecap

    ex

    6403 51 00

    Covering the ankle

    ex

    6403 59 00

    Other

    ex

    6403 91 00

    Covering the ankle

    ex

    6403 99 00

    Other

    ex

    6404 19 10

    Slippers and other indoor footwear

    ex

    6404 20 00

    Footwear with outer soles of leather or composition leather

    ex

    6405 00 00

    Other footwear

    ex

    6504 00 00

    Hats and other headgear, plaited or made by assembling strips of any material, whether or not lined or trimmed

    ex

    6505 00 10

    Of fur felt or of felt of wool and fur, made from the hat bodies, hoods or plateaux of heading 6501 00 00

    ex

    6505 00 30

    Peaked caps

    ex

    6505 00 90

    Other

    ex

    6506 99 00

    Of other materials

    ex

    6601 91 00

    Having a telescopic shaft

    ex

    6601 99 00

    Other

    ex

    6602 00 00

    Walking sticks, seat-sticks, whips, riding-crops and the like

    ex

    9619 00 81

    Napkins and napkin liners for babies

    (9)   Carpets, rugs and tapestries, hand-made or not



    ex

    5701 00 00

    Carpets and other textile floor coverings, knotted, whether or not made up

    ex

    5702 10 00

    ‘Kelem’, ‘Schumacks’, ‘Karamanie’ and similar hand-woven rugs

    ex

    5702 20 00

    Floor coverings of coconut fibres (coir)

    ex

    5702 31 80

    Other

    ex

    5702 32 00

    Of man-made textile materials

    ex

    5702 39 00

    Of other textile materials

    ex

    5702 41 90

    Other

    ex

    5702 42 00

    Of man-made textile materials

    ex

    5702 50 00

    Other, not of pile construction, not made up

    ex

    5702 91 00

    Of wool or fine animal hair

    ex

    5702 92 00

    Of man-made textile materials

    ex

    5702 99 00

    Of other textile materials

    ex

    5703 00 00

    Carpets and other textile floor coverings, tufted, whether or not made up

    ex

    5704 00 00

    Carpets and other textile floor coverings, of felt, not tufted or flocked, whether or not made up

    ex

    5705 00 00

    Other carpets and other textile floor coverings, whether or not made up

    ex

    5805 00 00

    Hand-woven tapestries of the type Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up

    (10)   Pearls, precious and semi-precious stones, articles of pearls, jewellery, gold- or silversmith articles



    ex

    7101 00 00

    Pearls, natural or cultured, whether or not worked or graded but not strung, mounted or set; pearls, natural or cultured, temporarily strung for convenience of transport

    ex

    7102 00 00

    Diamonds, whether or not worked, but not mounted or set, excluding for industrial use

    ex

    7103 00 00

    Precious stones (other than diamonds) and semi-precious stones, whether or not worked or graded but not strung, mounted or set; ungraded precious stones (other than diamonds) and semi-precious stones, temporarily strung for convenience of transport

    ex

    7104 91 00

    Diamonds, excluding for industrial use

    ex

    7105 00 00

    Dust and powder of natural or synthetic precious or semi-precious stones

    ex

    7106 00 00

    Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form

    ex

    7107 00 00

    Base metals clad with silver, not further worked than semi-manufactured

    ex

    7108 00 00

    Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form

    ex

    7109 00 00

    Base metals or silver, clad with gold, not further worked than semi-manufactured

    ex

    7110 11 00

    Platinum, unwrought or in powder form

    ex

    7110 19 00

    Platinum, other than unwrought or in powder form

    ex

    7110 21 00

    Palladium, unwrought or in powder form

    ex

    7110 29 00

    Palladium, other than unwrought or in powder form

    ex

    7110 31 00

    Rhodium, unwrought or in powder form

    ex

    7110 39 00

    Rhodium, other than unwrought or in powder form

    ex

    7110 41 00

    Iridium, osmium and ruthenium, unwrought or in powder form

    ex

    7110 49 00

    Iridium, osmium and ruthenium, other than unwrought or in powder form

    ex

    7111 00 00

    Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured

    ex

    7113 00 00

    Articles of jewellery and parts thereof, of precious metal or of metal clad with precious metal

    ex

    7114 00 00

    Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of precious metal or of metal clad with precious metal

    ex

    7115 00 00

    Other articles of precious metal or of metal clad with precious metal

    ex

    7116 00 00

    Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed)

    (11)   Coins and banknotes, not being legal tender



    ex

    4907 00 30

    Banknotes

    ex

    7118 10 00

    Coin (other than gold coin), not being legal tender

    ex

    7118 90 00

    Other

    (12)   Cutlery of precious metal or plated or clad with precious metal



    ex

    7114 00 00

    Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of precious metal or of metal clad with precious metal

    ex

    7115 00 00

    Other articles of precious metal or of metal clad with precious metal

    ex

    8214 00 00

    Other articles of cutlery (for example, hair clippers, butchers’ or kitchen cleavers, choppers and mincing knives, paperknives); manicure or pedicure sets and instruments (including nail files)

    ex

    8215 00 00

    Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware

    ex

    9307 00 00

    Swords, cutlasses, bayonets, lances and similar arms and parts thereof and scabbards and sheaths therefor

    (13)   Tableware of porcelain, china, stone- or earthenware or fine pottery



    ex

    6911 00 00

    Tableware, kitchenware, other household articles and toilet articles, of porcelain or china

    ex

    6912 00 23

    Stoneware

    ex

    6912 00 25

    Earthenware or fine pottery

    ex

    6912 00 83

    Stoneware

    ex

    6912 00 85

    Earthenware or fine pottery

    ex

    6914 10 00

    Of porcelain or china

    ex

    6914 90 00

    Other

    (14)   Items of lead crystal



    ex

    7009 91 00

    Unframed

    ex

    7009 92 00

    Framed

    ex

    7010 00 00

    Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass

    ex

    7013 22 00

    Of lead crystal

    ex

    7013 33 00

    Of lead crystal

    ex

    7013 41 00

    Of lead crystal

    ex

    7013 91 00

    Of lead crystal

    ex

    7018 10 00

    Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares

    ex

    7018 90 00

    Other

    ex

    7020 00 80

    Other

    ex

    9405 50 00

    Non-electrical lamps and lighting fittings

    ex

    9405 91 00

    Of glass

    (15)   Electronic items for domestic use of a value exceeding EUR 750



    ex

    8414 51

    Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W

    ex

    8414 59 00

    Other

    ex

    8414 60 00

    Hoods having a maximum horizontal side not exceeding 120 cm

    ex

    8415 10 00

    Window or wall types, self-contained or ‘split-system’

    ex

    8418 10 00

    Combined refrigerator-freezers, fitted with separate external doors

    ex

    8418 21 00

    Compression-type

    ex

    8418 29 00

    Other

    ex

    8418 30 00

    Freezers of the chest type, not exceeding 800 litres capacity

    ex

    8418 40 00

    Freezers of the upright type, not exceeding 900 litres capacity

    ex

    8419 81 00

    For making hot drinks or for cooking or heating food

    ex

    8422 11 00

    Of the household type

    ex

    8423 10 00

    Personal weighing machines, including baby scales; household scales

    ex

    8443 12 00

    Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state)

    ex

    8443 31 00

    Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a network

    ex

    8443 32 00

    Other, capable of connecting to an automatic data-processing machine or to a network

    ex

    8443 39 00

    Other

    ex

    8450 11 00

    Fully-automatic machines

    ex

    8450 12 00

    Other machines, with built-in centrifugal drier

    ex

    8450 19 00

    Other

    ex

    8451 21 00

    Each of a dry linen capacity not exceeding 10 kg

    ex

    8452 10 00

    Sewing machines of the household type

    ex

    8470 10 00

    Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functions

    ex

    8470 21 00

    Incorporating a printing device

    ex

    8470 29 00

    Other

    ex

    8470 30 00

    Other calculating machines

    ex

    8472 90 80

    Other

    ex

    8479 60 00

    Evaporative air coolers

    ex

    8508 11 00

    Of a power not exceeding 1 500  W and having a dust bag or other receptacle capacity not exceeding 20 l

    ex

    8508 19 00

    Other

    ex

    8508 60 00

    Other vacuum cleaners

    ex

    8509 80 00

    Other appliances

    ex

    8516 31 00

    Hairdryers

    ex

    8516 50 00

    Microwave ovens

    ex

    8516 60 10

    Cookers (incorporating at least an oven and a hob)

    ex

    8516 71 00

    Coffee or tea makers

    ex

    8516 72 00

    Toasters

    ex

    8516 79 00

    Other

    ex

    8517 11 00

    Line telephone sets with cordless handsets

    ex

    8517 13 00

    Smartphones

    ex

    8517 18 00

    Other

    ex

    8529 10 65

    Inside aerials for radio or television broadcast receivers, including built-in types

    ex

    8529 10 69

    Other

    ex

    8531 10 00

    Burglar or fire alarms and similar apparatus

    ex

    8543 70 10

    Electrical machines with translation or dictionary functions

    ex

    8543 70 30

    Aerial amplifiers

    ex

    8543 70 50

    Sunbeds, sunlamps and similar suntanning equipment

    ex

    8543 70 90

    Other

    ex

    9504 50 00

    Video game consoles and machines, other than those of subheading 9504 30

    ex

    9504 90 80

    Other

    (16)   Electrical/electronic or optical apparatus for recording and reproducing sound and images of a value exceeding EUR 1 000



    ex

    8519 00 00

    Sound recording or sound reproducing apparatus

    ex

    8521 00 00

    Video recording or reproducing apparatus, whether or not incorporating a video tuner

    ex

    8527 00 00

    Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock

    ex

    8528 71 00

    Not designed to incorporate a video display or screen

    ex

    8528 72 00

    Other, colour

    ex

    9006 00 00

    Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than discharge lamps of heading 8539

    (17)   Vehicles, for the transport of persons on earth, air or sea of a value exceeding EUR 50 000 each, teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars, motorbikes of a value exceeding EUR 5 000 each, as well as their accessories and spare parts



    ex

    4011 10 00

    Of a kind used on motor cars (including station wagons and racing cars)

    ex

    4011 40 00

    Of a kind used on motorcycles

    ex

    4011 90 00

    Other

    ex

    7009 10 00

    Rear-view mirrors for vehicles

    ex

    8407 00 00

    Spark-ignition reciprocating or rotary internal combustion piston engines

    ex

    8409 00 00

    Parts suitable for use solely or principally with the engines of heading 8407 or 8408

    ex

    8428 60 00

    Teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars

    ex

    8512 30 10

    Burglar alarms of a kind used for motor vehicles

    ex

    8512 30 90

    Other

    ex

    8512 40 00

    Windscreen wipers, defrosters and demisters

    ex

    8603 00 00

    Self-propelled railway or tramway coaches, vans and trucks, other than those of heading 8604

    ex

    8605 00 00

    Railway or tramway passenger coaches, not self-propelled; luggage vans, post office coaches and other special purpose railway or tramway coaches, not self-propelled (excluding those of heading 8604 )

    ex

    8607 00 00

    Parts of railway or tramway locomotives or rolling stock

    ex

    8702 00 00

    Motor vehicles for the transport of ten or more persons, including the driver

    ex

    8706 00 00

    Chassis fitted with engines, for the motor vehicles of headings 8701 to 8705

    ex

    8707 00 00

    Bodies (including cabs), for the motor vehicles of headings 8701 to 8705

    ex

    8708 00 00

    Parts and accessories of the motor vehicles of headings 8701 to 8705

    ex

    8711 00 00

    Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars

    ex

    8712 00 00

    Bicycles and other cycles (including delivery tricycles), not motorised

    ex

    8714 00 00

    Parts and accessories of vehicles of headings 8711 to 8713

    ex

    8716 10 00

    Trailers and semi-trailers of the caravan type, for housing or camping

    ex

    8716 40 00

    Other trailers and semi-trailers

    ex

    8901 10 00

    Cruise ships, excursion boats and similar vessels principally designed for the transport of persons; ferry-boats of all kinds

    ex

    8901 90 00

    Other vessels for the transport of goods and other vessels for the transport of both persons and goods

    (18)   Clocks and watches and their parts



    ex

    9101 00 00

    Wristwatches, pocket-watches and other watches, including stopwatches, with case of precious metal or of metal clad with precious metal

    ex

    9102 00 00

    Wristwatches, pocket-watches and other watches, including stopwatches, other than those of heading 9101

    ex

    9103 00 00

    Clocks with watch movements, excluding clocks of heading 9104

    ex

    9104 00 00

    Instrument panel clocks and clocks of a similar type for vehicles, aircraft, spacecraft or vessels

    ex

    9105 00 00

    Other clocks

    ex

    9108 00 00

    Watch movements, complete and assembled

    ex

    9109 00 00

    Clock movements, complete and assembled

    ex

    9110 00 00

    Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements

    ex

    9111 00 00

    Watch cases and parts thereof

    ex

    9112 00 00

    Clock cases and cases of a similar type for other goods of this chapter, and parts thereof

    ex

    9113 00 00

    Watch straps, watch bands and watch bracelets, and parts thereof

    ex

    9114 00 00

    Other clock or watch parts

    (19)   Musical instruments of a value exceeding EUR 1 500



    ex

    9201 00 00

    Pianos, including automatic pianos; harpsichords and other keyboard stringed instruments

    ex

    9202 00 00

    Other string musical instruments (for example, guitars, violins, harps)

    ex

    9205 00 00

    Wind musical instruments (for example, keyboard pipe organs, accordions, clarinets, trumpets, bagpipes), other than fairground organs and mechanical street organs

    ex

    9206 00 00

    Percussion musical instruments (for example, drums, xylophones, cymbals, castanets, maracas)

    ex

    9207 00 00

    Musical instruments, the sound of which is produced, or must be amplified, electrically (for example, organs, guitars, accordions)

    (20)   Works of art, collectors’ pieces and antiques



    ex

    9700

    Works of art, collectors’ pieces and antiques

    (21)   Articles and equipment for sports, including skiing, golf, diving and water sports



    ex

    4015 19 00

    Other

    ex

    4015 90 00

    Other

    ex

    6210 40 00

    Other men’s or boys’ garments

    ex

    6210 50 00

    Other women’s or girls’ garments

    ex

    6211 11 00

    Men’s or boys’

    ex

    6211 12 00

    Women’s or girls’

    ex

    6211 20 00

    Ski suits

    ex

    6216 00 00

    Gloves, mittens and mitts

    ex

    6402 12 00

    Ski-boots, cross-country ski footwear and snowboard boots

    ex

    6402 19 00

    Other

    ex

    6403 12 00

    Ski-boots, cross-country ski footwear and snowboard boots

    ex

    6403 19 00

    Other

    ex

    6404 11 00

    Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like

    ex

    6404 19 90

    Other

    ex

    9004 90 00

    Other

    ex

    9020 00 00

    Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters

    ex

    9506 11 00

    Skis

    ex

    9506 12 00

    Ski-fastenings (ski-bindings)

    ex

    9506 19 00

    Other

    ex

    9506 21 00

    Sailboards

    ex

    9506 29 00

    Other

    ex

    9506 31 00

    Clubs, complete

    ex

    9506 32 00

    Golf balls

    ex

    9506 39 00

    Other

    ex

    9506 40 00

    Articles and equipment for table tennis

    ex

    9506 51 00

    Lawn-tennis rackets, whether or not strung

    ex

    9506 59 00

    Other

    ex

    9506 61 00

    Lawn-tennis balls

    ex

    9506 69 10

    Cricket and polo balls

    ex

    9506 69 90

    Other

    ex

    9506 70

    Ice skates and roller skates, including skating boots with skates attached

    ex

    9506 91

    Articles and equipment for general physical exercise, gymnastics or athletics

    ex

    9506 99 10

    Cricket and polo equipment, other than balls

    ex

    9506 99 90

    Other

    ex

    9507 00 00

    Fishing rods, fish-hooks and other line fishing tackle; fish landing nets, butterfly nets and similar nets; decoy ‘birds’ (other than those of heading 9208 or 9705 ) and similar hunting or shooting requisites

    (22)   Articles and equipment for billiard, automatic bowling, casino games and games operated by coins or banknotes



    ex

    9504 20 00

    Articles and accessories for billiards of all kinds

    ex

    9504 30 00

    Other games, operated by coins, banknotes, bank cards, tokens or by any other means of payment, other than automatic bowling alley equipment

    ex

    9504 40 00

    Playing cards

    ex

    9504 50 00

    Video game consoles and machines, other than those of subheading 9504 30

    ex

    9504 90 80

    Other

    (23)   Optical articles and equipment of any value



    ex

    9004 90 90

    Night Vision Equipment, or Thermal Sight Equipment

    ex

    9013 80 90

    Red Dot Sights

    ▼M20




    ANNEX XIX

    List of legal persons, entities and bodies referred to in Article 5aa

    Part A

    OPK OBORONPROM
    UNITED AIRCRAFT CORPORATION
    URALVAGONZAVOD
    ROSNEFT
    TRANSNEFT
    GAZPROM NEFT
    ALMAZ-ANTEY
    KAMAZ
    ROSTEC (RUSSIAN TECHNOLOGIES STATE CORPORATION)
    JSC PO SEVMASH
    SOVCOMFLOT
    UNITED SHIPBUILDING CORPORATION

    Part B

    RUSSIAN MARITIME REGISTER of SHIPPING (RMRS)

    Part C

    RUSSIAN REGIONAL DEVELOPMENT BANK

    ▼M13




    ANNEX XX

    List of jet fuel and fuel additives as referred to in article 3c



    CN/TARIC Code

    Name of the good

     

    Jet fuel (other than kerosene):

    2710 12 70

    Spirit type jet fuel (light oils)

    2710 19 29

    Other than kerosene (medium oils)

    2710 19 21

    Kerosene type jet fuel (medium oils)

    2710 20 90

    Kerosene type jet fuel blended with biodiesel (1)

     

    Oxidation inhibitors

    Oxidation inhibitors used in additives for lubricating oils:

    3811 21 00

    — oxidation inhibitors containing petroleum oils

    3811 29 00

    — other oxidation inhibitors

    3811 90 00

    Oxidation inhibitors used for other liquids used for the same purpose as mineral oils

     

    Static dissipater additives

    Static dissipater additives for lubricating oils:

    3811 21 00

    — containing petroleum oils

    3811 29 00

    — other

    3811 90 00

    Static dissipater additives for other liquids used for the same purpose as mineral oils

     

    Corrosion inhibitors

    Corrosion inhibitors for lubricating oils:

    3811 21 00

    — containing petroleum oils

    3811 29 00

    — other

    3811 90 00

    Corrosion inhibitors for other liquids used for the same purpose as mineral oils

     

    Fuel system icing inhibitors (anti-icing additives)

    Fuel system icing inhibitors for lubricating oils:

    3811 21 00

    — containing petroleum oils

    3811 29 00

    — other

    3811 90 00

    Fuel system icing inhibitors for other liquids used for the same purpose as mineral oils

     

    Metal de-activators

    Metal de-activators for lubricating oils:

    3811 21 00

    — containing petroleum oils

    3811 29 00

    — other

    3811 90 00

    Metal de-activator for other liquids used for the same purpose as mineral oils

     

    Biocide additives

    Biocide additives for lubricating oils:

    3811 21 00

    — containing petroleum oils

    3811 29 00

    — other

    3811 90 00

    Biocide additives for other liquids used for the same purpose as mineral oils

     

    Thermal stability improver additives

    Thermal stability improver for lubricating oils:

    3811 21 00

    — containing petroleum oils

    3811 29 00

    — other

    3811 90 00

    Thermal stability improver for other liquids used for the same purpose as mineral oils

    (1)   

    Provided it still contains 70 % or more by weight of petroleum oils or bituminous mineral oils.

    ▼M26




    ANNEX XXI

    List of goods and technology referred to in Article 3i



    CN code

    Name of the good

    0306

    Crustaceans, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked crustaceans, whether in shell or not, whether or not cooked before or during the smoking process; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine

    1604 31 00

    Caviar

    1604 32 00

    Caviar substitutes

    2208

    Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages

    2303

    Residues of starch manufacture and similar residues, beet-pulp, bagasse and other waste of sugar manufacture, brewing or distilling dregs and waste, whether or not in the form of pellets

    2402

    Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes

    2523

    Portland cement, aluminous cement, slag cement, supersulphate cement and similar hydraulic cements, whether or not coloured or in the form of clinkers

    2701

    Coal; briquettes, ovoids and similar solid fuels manufactured from coal

    2702

    Lignite, whether or not agglomerated, excluding jet

    2703

    Peat, including peat litter, whether or not agglomerated

    2704

    Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon

    2705

    Coal gas, water gas, producer gas and similar gases, other than petroleum gases and other gaseous hydrocarbons

    2706

    Tar distilled from coal, from lignite or from peat, and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars

    2707

    Oils and other products of the distillation of high temperature coal tar; similar products in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents

    2708

    Pitch and pitch coke, obtained from coal tar or from other mineral tars

    2711 12

    Propane, liquefied

    2711 13

    Butanes, liquefied

    2711 14

    Ethylene, propylene, butylene and butadiene, liquefied

    2711 19

    Gaseous hydrocarbons, liquified, n.e.s.

    2712

    Petroleum jelly, paraffin wax, micro- crystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured

    2713

    Petroleum coke, petroleum bitumen and other residues of petroleum oil or of oil obtained from bituminous minerals

    2714

    Bitumen and asphalt, natural; bituminous or oil-shale and tar sands; asphaltites and asphaltic rocks

    2715

    Bituminous mastics, cut-backs and other bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch

    2803

    Carbon (carbon blacks and other forms of carbon not elsewhere specified or included)

    2811

    Inorganic acids and inorganic oxygen compounds of non-metals (excl. hydrogen chloride (hydrochloric acid), chlorosulphuric acid, sulphuric acid, oleum, nitric acid, sulphonitric acids, diphosphorus pentaoxide, phosphoric acid, polyphosphoric acids, oxides of boron and boric acids)

    2818

    Artificial corundum, whether or not chemically defined; aluminium oxide; aluminium hydroxide

    ex  28 25

    Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides, except for CN codes 28252000 and 28253000

    2834

    Nitrites; nitrates

    ex  28 35

    Phosphinates (hypophosphites), phosphonates (phosphites) and phosphates; polyphosphates, whether or not chemically defined, except for CN code 28352600

    2836

    Carbonates; peroxocarbonates (percarbonates); commercial ammonium carbonate containing ammonium carbamate

    ex  29 01

    Acyclic hydrocarbons, except for CN code 29011000

    2902

    Cyclic hydrocarbons

    2903

    Halogenated derivatives of hydrocarbons

    2905

    Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives

    2907

    Phenols; phenol-alcohols

    2909

    Ethers, ether-alcohols, ether-phenols, ether-alcohol-phenols, alcohol peroxides, ether peroxides, acetal and hemiacetal peroxides, ketone peroxides (whether or not chemically defined), and their halogenated, sulphonated, nitrated or nitrosated derivatives

    2914

    Ketones and quinones, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivatives

    2915

    Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives

    2917

    Polycarboxylic acids, their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives

    2922

    Oxygen-function amino-compounds

    2923

    Quaternary ammonium salts and hydroxides; lecithins and other phosphoaminolipids, whether or not chemically defined

    2931

    Separate chemically defined organo-inorganic compounds (excl. organo-sulphur compounds and those of mercury)

    2933

    Heterocyclic compounds with nitrogen hetero-atom[s] only

    3104 20

    Potassium chloride

    3105 20

    Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium

    3105 60

    Mineral or chemical fertilisers containing the two fertilising elements phosphorus and potassium

    ex 3105 90 20

    Other fertilising containing photassium chloride

    ex 3105 90 80

    Other fertilising containing photassium chloride

    3301

    Essential oils, whether or not terpeneless, incl. concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, fixed oils, waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils

    3304

    Beauty or make-up preparations and preparations for the care of the skin, incl. sunscreen or suntan preparations (excl. medicaments); manicure or pedicure preparations

    3305

    Preparations for use on the hair

    3306

    Preparations for oral or dental hygiene, incl. denture fixative pastes and powders; yarn used to clean between the teeth (dental floss), in individual retail packages

    3307

    Shaving preparations, incl. pre-shave and aftershave products, personal deodorants, bath and shower preparations, depilatories and other perfumery, toilet or cosmetic preparations, n.e.s.; prepared room deodorisers, whether or not perfumed or having disinfectant properties

    3401

    Soap; organic surface-active products and preparations for use as soap, in the form of bars, cakes, moulded pieces or shapes, whether or not containing soap; organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap; paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent

    3402

    Organic surface-active agents (excl. soap); surface-active preparations, washing preparations, incl. auxiliary washing preparations, and cleaning preparations, whether or not containing soap (excl. those of heading 3401 )

    3404

    Artificial waxes and prepared waxes

    3801

    Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures

    3811

    Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils, incl. gasoline, or for other liquids used for the same purposes as mineral oils

    3812

    Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics

    3817

    Mixed alkylbenzenes and mixed alkylnaphthalenes produced by the alkylation of benzene and naphthalene (excl. mixed isomers of cyclic hydrocarbons)

    3819

    Hydraulic brake fluids and other prepared liquids for hydraulic transmission not containing petroleum oil or bituminous mineral oil, or containing < 70 % petroleum oil or bituminous mineral oil by weight

    3823

    Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols

    3824

    Prepared binders for foundry moulds or cores; chemical products and preparations for the chemical or allied industries, incl. mixtures of natural products, n.e.s.

    3901

    Polymers of ethylene, in primary forms

    3902

    Polymers of propylene or of other olefins, in primary forms

    3903

    Polymers of styrene, in primary forms

    3904

    Polymers of vinyl chloride or of other halogenated olefins, in primary forms

    3907

    Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms

    3908

    Polyamides, in primary forms

    3916

    Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked

    3917

    Tubes, pipes and hoses, and fittings therefor, e.g. joints, elbows, flanges, of plastics

    3919

    Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls (excl. floor, wall and ceiling coverings of heading 3918 )

    3920

    Plates, sheets, film, foil and strip, of non-cellular plastics, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 )

    3921

    Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, or of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 )

    3923

    Articles for the conveyance or packaging of goods, of plastics; stoppers, lids, caps and other closures, of plastics

    3925

    Builders’ ware of plastics, n.e.s.

    3926

    Articles of plastics and articles of other materials of heading 3901 to 3914 , n.e.s.

    4002

    Synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip; mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, in primary forms or in plates, sheets or strip

    4011

    New pneumatic tyres, of rubber

    4107

    Leather further prepared after tanning or crusting (incl. parchment-dressed leather), of bovine (incl. buffalo) or equine animals, without hair on, whether or not split (excl. chamois leather, patent leather and patent laminated leather, and metallised leather)

    4202

    Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverage bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarette-cases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder-boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper

    4301

    Raw furskins, incl. heads, tails, paws and other pieces or cuttings suitable for use in furriery (excl. raw hides and skins of heading 4101 , 4102 or 4103 )

    44

    Wood and articles of wood; wood charcoal

    4703

    Chemical wood pulp, soda or sulphate (excl. dissolving grades)

    4705

    Wood pulp obtained by a combination of mechanical and chemical pulping processes

    4801

    Newsprint as specified in note 4 to Chapter 48, in rolls of a width > 28 cm or in square or rectangular sheets with one side > 28 cm and the other side > 15 cm in the unfolded state

    4802

    Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or in square or rectangular sheets, of any size, and handmade paper and paperboard (excl. newsprint of heading 4801 and paper of heading 4803 )

    4803

    Toilet or facial tissue stock, towel or napkin stock and similar paper for household or sanitary purposes, cellulose wadding and webs of cellulose fibres, whether or not creped, crinkled, embossed, perforated, surface-coloured, surface-decorated or printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

    4804

    Uncoated kraft paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. goods of heading 4802 or 4803 )

    4805

    Other paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, not worked other than as specified in note 3 to this chapter, n.e.s.

    4810

    Paper and paperboard, coated on one or both sides with kaolin (China clay) or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. all other coated papers and paperboards)

    4811

    Paper, paperboard, cellulose wadding and webs of cellulose fibres, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 and 4810 )

    4818

    Toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind used for household or sanitary purposes, in rolls of a width <= 36 cm, or cut to size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, bedsheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibres

    4819

    Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres, n.e.s.; box files, letter trays, and similar articles, of paperboard of a kind used in offices, shops or the like

    4823

    Paper, paperboard, cellulose wadding and webs of cellulose fibres, in strips or rolls of a width <= 36 cm, in rectangular or square sheets of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square, and articles of paper pulp, paper, paperboard, cellulose wadding or webs or cellulose fibres, n.e.s.

    5402

    Synthetic filament yarn, incl. synthetic monofilaments of < 67 decitex (excl. sewing thread and yarn put up for retail sale)

    5601

    Wadding of textile materials and articles thereof; textile fibres with a length of <= 5 mm ‘flock’, textile dust and mill neps (excl. wadding and articles thereof impregnated or coated with pharmaceutical substances or put up for retail sale for medical, surgical, dental or veterinary purposes, and products impregnated, coated or covered with perfumes, cosmetics, soaps etc.)

    5603

    Nonwovens, whether or not impregnated, coated, covered or laminated, n.e.s.

    6204

    Women’s or girls’ suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (excl. knitted or crocheted, wind-jackets and similar articles, slips, petticoats and panties, tracksuits, ski suits and swimwear)

    6305

    Sacks and bags, of a kind used for the packing of goods, of all types of textile materials

    6403

    Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather (excl. orthopaedic footwear, skating boots with ice or roller skates attached, and toy footwear)

    6806

    Slag-wool, rock-wool and similar mineral wools; exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials; mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excl. articles of light concrete, asbestos, asbestos-cement, cellulose fibre-cement or the like, mixtures and other articles of or based on asbestos, and ceramic products)

    6807

    Articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch

    6808

    Panels, boards, tiles, blocks and similar articles of vegetable fibre, of straw or of shavings, chips, particles, sawdust or other waste of wood, agglomerated with cement, plaster or other mineral binders (excl. articles of asbestos-cement, cellulose fibre-cement or the like)

    6810

    Articles of cement, of concrete or of artificial stone, whether or not reinforced

    6814

    Worked mica and articles of mica, incl. agglomerated or reconstituted mica, whether or not on a support of paper, paperboard or other materials (excl. electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, and mica in the form of christmas tree decorations)

    6815

    Articles of stone or of other mineral substances, incl. carbon fibres, articles of carbon fibres and articles of peat, n.e.s.

    6902

    Refractory bricks, blocks, tiles and similar refractory ceramic constructional goods (excl. those of siliceous fossil meals or similar siliceous earths)

    6907

    Ceramic flags and paving, hearth or wall tiles; ceramic mosaic cubes and the like, whether or not on a backing (excl. of siliceous fossil meals or similar siliceous earths, refractory goods, tiles specially adapted as table mats, ornamental articles and tiles specifically manufactured for stoves)

    7005

    Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked

    7007

    Safety glass, consisting of toughened (tempered) or laminated glass

    7010

    Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass

    7019

    Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics)

    7104

    Precious and semi-precious stones, synthetic or reconstructed, whether or not worked or graded but not strung, mounted or set; ungraded synthetic or reconstructed precious or semi-precious stones, temporarily strung for convenience of transport

    7106

    Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form

    7112

    Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious-metal compounds, of a kind used principally for the recovery of precious metal (excl. waste and scrap melted down into unworked blocks, ingots, or similar forms)

    7115

    Articles of precious metal or of metal clad with precious metal, n.e.s.

    7201

    Pig iron and spiegeleisen, in pigs, blocks or other primary forms

    7202

    Ferro-alloys

    7203

    Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms

    7205

    Granules and powders of pig iron, spiegeleisen, iron or steel

    7408

    Copper wire

    7604

    Aluminium bars, rods and profiles

    7605

    Aluminium wire

    7606

    Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm

    7607

    Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0,2 mm

    7608

    Aluminium tubes and pipes

    7801

    Unwrought lead

    8207

    Tools, interchangeable, for hand tools, whether or not power-operated, or for machine tools (e.g. for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), incl. dies for drawing or extruding metal, and rock-drilling or earth-boring tools

    8212

    Non-electric razors and razor blades of base metal, incl. razor blade blanks in strips

    8302

    Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal

    8309

    Stoppers, caps and lids, incl. crown corks, screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal

    8407

    Spark-ignition reciprocating or rotary internal combustion piston engine

    8408

    Compression-ignition internal combustion piston engine (diesel or semi-diesel engine)

    8409

    Parts suitable for use solely or principally with internal combustion piston engine of heading 8407 or 8408

    Ex  84 11

    Turbojets, turbopropellers and other gas turbines with the exception of parts of turbojets or turbopropellers of CN code 8411 91 00

    8412

    Engines and motors (excl. steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines and electric motors); parts thereof

    8413

    Pumps for liquids, whether or not fitted with a measuring device (excl. ceramic pumps and secretion aspirating pumps for medical use and medical pumps carried on or implanted in the body); liquid elevators (excl. pumps); parts thereof

    8414

    Air or vacuum pumps (excl. gas compound elevators and pneumatic elevators and conveyors); air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; parts thereof

    8418

    Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps; parts thereof (excl. air conditioning machines of heading 8415 )

    8419

    Machinery, plant or laboratory equipment whether or not electrically heated (excl. furnaces, ovens and other equipment of heading 8514 ), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling (excl. those used for domestic purposes); instantaneous or storage water heaters, non-electric; parts thereof

    8421

    Centrifuges, incl. centrifugal dryers (excl. those for isotope separation); filtering or purifying machinery and apparatus, for liquids or gases; parts thereof (excl. artificial kidneys)

    8422

    Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery, incl. heat-shrink wrapping machinery; machinery for aerating beverages; parts thereof

    8424

    Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.; fire extinguishers, charged or not (excl. fire-extinguishing bombs and grenades); spray guns and similar appliances (excl. electric machines and apparatus for hot spraying of metals or sintered metal carbides of heading 8515 ); steam or sand blasting machines and similar jet projecting machines; parts thereof, n.e.s.

    8426

    Ships’ derricks; cranes, incl. cable cranes (excl. wheel-mounted cranes and vehicle cranes for railways); mobile lifting frames, straddle carriers and works trucks fitted with a crane

    8431

    Parts suitable for use solely or principally with the machinery of headings 8425 to 8430

    8450

    Household or laundry-type washing machines, incl. machines which both wash and dry; parts thereof

    8455

    Metal-rolling mills and rolls therefor; parts of metal-rolling mills

    8466

    Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any type of tool for working in the hand

    8467

    Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof

    8471

    Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, n.e.s.

    8474

    Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid, incl. powder or paste, form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand; parts thereof

    8477

    Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter, parts thereof

    8479

    Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof

    8480

    Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics (excl. moulds of graphite or other carbons, ceramic or glass moulds and linotype moulds or matrices)

    8481

    Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, incl. pressure-reducing valves and thermostatically controlled valves; parts thereof

    8482

    Ball or roller bearings (excl. steel balls of heading 7326 ); parts thereof

    8483

    Transmission shafts, incl. camshafts and crankshafts, and cranks; bearing housings and plain shaft bearings for machines; gears and gearing; ball or roller screws, gear boxes and other speed changers, incl. torque converters; flywheels and pulleys, incl. pulley blocks, clutches and shaft couplings, incl. universal joints; parts thereof

    8487

    Machinery parts, n.e.s. in Chapter 84 (excl. parts containing electrical connectors, insulators, coils, contacts or other electrical features)

    8501

    Electric motors and generators (excl. generating sets)

    8502

    Electric generating sets and rotary converters

    8503

    Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s.

    8504

    Electrical transformers, static converters, e.g. rectifiers, and inductors; parts thereof

    8511

    Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines, e.g. ignition magnetos, magneto-dynamos, ignition coils, sparking plugs, glow plugs and starter motors; generators, e.g. dynamos and alternators, and cut-outs of a kind used in conjunction with such engines; parts thereof

    8516

    Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electro-thermic hairdressing apparatus, e.g. hairdryers, hair curlers and curling tong heaters, and hand dryers; electric smoothing irons; other electro-thermic appliances of a kind used for domestic purposes; electric heating resistors (other than those of heading 8545 ); parts thereof

    8517

    Telephone sets, incl. telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, incl. apparatus for communication in a wired or wireless network [such as a local or wide area network]; parts thereof (excl. than transmission or reception apparatus of heading 8443 , 8525 , 8527 or 8528 )

    8523

    Discs, tapes, solid-state non-volatile storage devices, ‘smart cards’ and other media for the recording of sound or of other phenomena, whether or not recorded, incl. matrices and masters for the production of discs (excl. products of Chapter 37)

    8525

    Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders

    8526

    Radar apparatus, radio navigational aid apparatus and radio remote control apparatus

    8531

    Electric sound or visual signalling apparatus, e.g. bells, sirens, indicator panels, burglar or fire alarms (excl. those for cycles, motor vehicles and traffic signalling); parts thereof

    8535

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, e.g., switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes, for a voltage > 1 000  V (excl. control desks, cabinets, panels etc. of heading 8537 )

    8536

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, e.g., switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and junction boxes, for a voltage <= 1 000  V (excl. control desks, cabinets, panels etc. of heading 8537 )

    8537

    Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, incl. those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus (excl. switching apparatus for line telephony or line telegraphy)

    8538

    Parts suitable for use solely or principally with the apparatus of heading 8535 , 8536 or 8537 , n.e.s.

    8539

    Electric filament or discharge lamps, incl. sealed beam lamp units and ultraviolet or infra-red lamps; arc lamps; light-emitting diode (LED) lamps; parts thereof

    8541

    Diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, incl. photovoltaic cells whether or not assembled in modules or made up into panels (excl. photovoltaic generators); light emitting diodes (LED); mounted piezoelectric crystals; parts thereof

    8542

    Electronic integrated circuits; parts thereof

    8543

    Electrical machines and apparatus, having individual functions, n.e.s. in Chapter 85 and parts thereof

    8544

    Insulated (incl. enamelled or anodised) wire, cable (incl. coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors

    8545

    Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes

    8603

    Self-propelled railway or tramway coaches, vans and trucks (excl. those of heading 8604 )

    8606

    Railway or tramway goods vans and wagons (excl. self-propelled and luggage vans and post office coaches)

    8701

    Tractors (other than tractors of heading 8709 )

    8703

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars (excl. motor vehicles of heading 8702 )

    8704

    Motor vehicles for the transport of goods, incl. chassis with engine and cab

    8716

    Trailers and semi-trailers; other vehicles, not mechanically propelled (excl. railway and tramway vehicles); parts thereof, n.e.s.

    8802

    Powered aircraft (e.g. helicopters and aeroplanes); spacecraft, incl. satellites, and suborbital and spacecraft launch vehicles

    8901

    Cruise ships, excursion boats, ferry-boats, cargo ships, barges and similar vessels for the transport of persons or goods

    8903

    Yachts and other vessels for pleasure or sports; rowing boats and canoes

    8904

    Tugs and pusher craft

    8905

    Light-vessels, fire-floats, dredgers, floating cranes, and other vessels the navigability of which is subsidiary to their main function; floating docks; floating or submersible drilling or production platforms

    9001

    Optical fibres and optical fibre bundles; optical fibre cables (excl. made up of individually sheathed fibres of heading 8544 ); sheets and plates of polarising material; lenses, incl. contact lenses, prisms, mirrors and other optical elements of any material, unmounted (excl. such elements of glass not optically worked)

    9006

    Photographic cameras, photographic flashlight apparatus and flashbulbs (excl. discharge lamps of heading 8539 )

    9013

    Liquid crystal devices not constituting articles provided for more specifically in other heading; lasers (excl. laser diodes); other optical appliances and instruments not elsewhere specified in Chapter 90

    9014

    Direction finding compasses; other navigational instruments and appliances (excl. radio navigational equipment)

    9026

    Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, e.g. flow meters, level gauges, manometers, heat meters (excl. instruments and apparatus of heading 9014 , 9015 , 9028 or 9032 )

    9027

    Instruments and apparatus for physical or chemical analysis, e.g. polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus; instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light, incl. exposure meters; microtomes

    9030

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities (excl. meters of heading 9028 ); instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiations

    9031

    Measuring or checking instruments, appliances and machines not elsewhere specified in Chapter 90; profile projectors

    9032

    Regulating or controlling instruments and apparatus (excl. taps, cocks and valves of heading 8481 )

    9401

    Seats, whether or not convertible into beds, and parts thereof, n.e.s. (excl. medical, surgical, dental or veterinary of heading 9402 )

    9403

    Other furniture and parts thereof

    9404

    Mattress supports (excl. spring interiors for seats); articles of bedding and similar furnishing, e.g. mattresses, quilts, eiderdowns, cushions, pouffes and pillows, fitted with springs or stuffed or internally filled with any material or of cellular rubber or plastics, whether or not covered (excl. pneumatic or water mattresses and pillows, blankets and covers)

    9405

    Lamps and lighting fittings, incl. searchlights and spotlights, and parts thereof, n.e.s.; illuminated signs, illuminated nameplates and the like having a permanently fixed light source, and parts thereof, n.e.s.

    9406

    Prefabricated buildings, whether or not complete or already assembled

    ▼M25 —————

    ▼M26




    ANNEX XXIII

    List of goods and technology as referred to in Article 3k



    CN code

    Description

    0601

    Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant, in growth or in flower, chicory plants and roots other than roots of heading 1212 :

    0602 30

    Rhododendrons and azaleas, grafted or not

    0602 40

    Roses, grafted or not

    0602 90

    Other live plants (including their roots), cuttings and slips; mushroom spawn – Other

    0604 20

    Foliage, branches and other parts of plants, without flowers or flower buds, and grasses, mosses and lichens, being goods of a kind suitable for bouquets or for ornamental purposes, fresh, dried, dyed, bleached, impregnated or otherwise prepared – Fresh

    2508

    Clays, andalusite, kyanite and sillimanite, whether or not calcined; mullite; chamotte or dinas earths (excl. kaolin and other kaolinic clays, and expanded clay)

    2509

    Chalk

    2512

    Siliceous fossil meals (for example, kieselguhr, tripolite and diatomite) and similar siliceous earths, whether or not calcined, of an apparent specific gravity of 1 or less

    2515

    Marble, travertine, ecaussine and other calcareous monumental or building stone of an apparent specific gravity of >= 2,5, and alabaster, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a square or rectangular shape

    2518 20

    Calcined or sintered dolomite

    2519 10

    Natural magnesium carbonate (magnesite)

    2520 10

    Gypsum; anhydrite

    2521

    Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement

    2522

    Quicklime, slaked lime and hydraulic lime other than calcium oxide and hydroxide of heading 2825

    2525

    Mica, whether or not rifted into sheets or splittings; mica waste

    2526

    Natural steatite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape; talc

    2530 20

    Kieserite, epsomite (natural magnesium sulphates)

    2701

    Coal; briquettes, ovoids and similar solid fuels manufactured from coal

    2702

    Lignite, whether or not agglomerated, excluding jet

    2703

    Peat (including peat litter), whether or not agglomerated

    2704

    Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon

    2707 30

    Xylol (xylenes)

    2708

    Pitch and Pitch coke, obtained from coal tar or from other mineral tars

    2710

    Petroleum oils and oils obtained from bituminous minerals (excl. crude); preparations containing >= 70 % by weight of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, n.e.s.; waste oils containing mainly petroleum or bituminous minerals

    2712

    Petroleum jelly, paraffin wax, micro- crystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured

    2715

    Bituminous mastics, cut-backs and other bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch – Other

    Ex  28 04

    Hydrogen and other non-metals (excluding rare gases)

    2806

    Hydrogen chloride (hydrochloric acid); chlorosulphuric acid

    2811 29

    Other inorganic oxygen compounds of non-metals – Other

    2813 10

    Carbon disulphide

    2814

    Ammonia, anhydrous or in aqueous solution

    2815 12

    Sodium hydroxide (caustic soda) – In aqueous solution (soda lye or liquid soda)

    2818 30

    Aluminium hydroxide

    2819

    Chromium oxides and hydroxides

    2820

    Manganese oxides

    2825

    Hydrazine and hydroxylamine and their inorganic salts; inorganic bases, metal oxides, hydroxides and peroxides, n.e.s.

    2827 31

    Other chlorides – Of magnesium

    2827 35

    Other chlorides – Of nickel

    2828

    Hypochlorites; commercial calcium hypochlorite; chlorites; hypobromites

    2829 11

    Chlorates – Of sodium

    2832 20

    Sulphites (excluding sodium)

    2833 24

    Sulphates of nickel

    2833 30

    Alums

    2834 10

    Nitrites

    2836 30

    Sodium hydrogencarbonate (sodium bicarbonate)

    2836 50

    Calcium carbonate

    2839

    Silicates; commercial alkali metal silicates

    2840 30

    Peroxoborates (perborates)

    2841 50

    Other chromates and dichromates; peroxochromates

    2841 80

    Tungstates (wolframates)

    2843

    Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals

    2847

    Hydrogen peroxide, whether or not solidified with urea

    2901

    Acyclic hydrocarbons

    2902

    Cyclic hydrocarbons

    2903

    Halogenated derivatives of hydrocarbons

    2904

    Sulphonated, nitrated or nitrosated derivatives of hydrocarbons, whether or not halogenated

    2905 13

    Butan-1-ol (n-butyl alcohol)

    2905 16

    Octanol (octyl alcohol) and isomers thereof

    2905 19

    Saturated monohydric alcohols – Other

    2905 31

    Ethylene glycol (ethanediol)

    2905 41

    2-Ethyl-2-(hydroxymethyl)propane-1,3-diol (trimethylolpropane)

    2905 59

    Other polyhydric alcohols – Other

    2906

    Cyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives

    2907

    Phenols; phenol-alcohols

    2909

    Ethers, ether-alcohols, ether-phenols, ether-alcohol-phenols, alcohol peroxides, ether peroxide, ketone peroxides, whether or not chemically defined, and their halogenated, sulphonated, nitrated or nitrosated derivatives

    2910

    Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a three-membered ring, and their halogenated, sulphonated, nitrated or nitrosated derivatives

    2911

    Acetals and hemiacetals, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivatives

    2912

    Aldehydes, whether or not with other oxygen function; cyclic polymers of aldehydes; paraformaldehyde

    2914 11

    Acetone

    2914 61

    Anthraquinone

    2915 13

    Esters of formic acid

    2915 90

    Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives – Other

    2916

    Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic acids, their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives

    2917 33

    Dinonyl or didecyl orthophthalates

    2920 11

    Parathion (ISO) and parathion-methyl (ISO) (methyl-parathion)

    2921 22

    Hexamethylenediamine and its salts

    2921 41

    Aniline and its salts

    2922 11

    Monoethanolamine and its salts

    2922 43

    Anthranilic acid and its salts

    2923 20

    Lecithins and other phosphoaminolipids

    2930 40

    Methionine

    2933 54

    Other derivatives of malonylurea (barbituric acid); salts thereof

    2933 71

    6-Hexanelactam (epsilon-caprolactam)

    3201

    Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives

    3202

    Synthetic organic tanning substances; inorganic tanning substances; tanning preparations, whether or not containing natural tanning substances; enzymatic preparations for pre-tanning

    3203

    Colouring matter of vegetable or animal origin, incl. dye extracts (excl. animal black), whether or not chemically defined; preparations based on colouring matter of vegetable or animal origin of a kind used to dye fabrics or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 ) – Other

    3204 90

    Synthetic organic colouring matter, whether or not chemically defined; preparations as specified in note 3 to this chapter based on synthetic organic colouring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined

    3205

    Colour lakes (other than chinese or japanese lacquer and paints); preparations based on colour lakes of a kind used to dye fabrics or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 )

    3206 41

    Ultramarine and preparations based thereon of a kind used for colouring any material or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 )

    3206 49

    Inorganic or mineral colouring matter, n.e.s.; preparations based on inorganic or mineral colouring matter of a kind used for colouring any material or produce colorant preparations, n.e.s. (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 and inorganic products of a kind used as liminophores) – Other

    3207

    Prepared pigments, prepared opacifiers and prepared colours, vitrifiable enamels and glazes, engobes, liquid lustres and similar preparations of a kind used in the ceramic, enamelling or glass industry; glass frit and other glass in the form of powder, granules or flakes

    3208

    Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions of products of headings 3901 to 3913 in volatile organic solvents, containing > 50 % solvent by weight (excl. solutions of collodion)

    3209

    Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in an aqueous medium

    3210

    Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather

    3212 90

    Pigments (including metallic powders and flakes) dispersed in non- aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other colouring matter put up in forms or packings for retail sale – Other

    3214

    Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics; painters’ fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like

    3215 11

    Printing ink – Black

    3215 19

    Printing ink – Other

    3403

    Lubricant preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations based on lubricants; textile lubricant preparations and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials (excl. preparations containing, as basic constituents, >= 70 % petroleum oil or bituminous mineral oil by weight)

    3505 10

    Dextrins and other modified starches

    3506 99

    Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg – Other

    3701 20

    Instant print film

    3701 91

    For colour photography (polychrome)

    3702

    Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed

    3703

    Photographic paper, paperboard and textiles, sensitised, unexposed

    3705

    Photographic plates and film, exposed and developed (excl. products made of paper, paperboard or textiles, cinematographic film and ready-to-use printing plates)

    3706

    Cinematographic film, exposed and developed, whether or not incorporating soundtrack or consisting only of soundtrack

    3801 20

    Colloidal or semi-colloidal graphite

    3806 20

    Salts of rosin, of resin acids or of derivatives of rosin or resin acids (excl. salts of rosin adducts)

    3807

    Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewer’s pitch and similar preparations based on rosin, resin acids or vegetable pitch (excl. burgundy pitch, yellow pitch, stearin pitch, fatty acid pitch, fatty tar and glycerin pitch)

    3809

    Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations such as dressings and mordants of a kind used in the textile, paper, leather or like industries, n.e.s.

    3810

    Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding pastes and powders consisting of metal and other materials; preparations of a kind used as coatings or cores for welding electrodes or rods

    3811

    Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils, incl. gasoline, or for other liquids used for the same purposes as mineral oils

    3812

    Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics

    3813

    Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades (excl. full or empty fire-extinguishing devices, whether or not portable, unmixed chemically undefined products with fire-extinguishing properties in other forms)

    3814

    Organic composite solvents and thinners, n.e.s.; prepared paint or varnish removers (excl. nail varnish remover)

    3815

    Reaction initiators, reaction accelerators and catalytic preparations, n.e.s. (excl. rubber accelerators)

    3816

    Refractory cements, mortars, concretes and similar compositions, including dolomite ramming mix, other than products of heading 3801

    3817

    Mixed alkylbenzenes and mixed alkylnaphthalenes produced by the alkylation of benzene and naphthalene (excl. mixed isomers of cyclic hydrocarbons)

    3819

    Hydraulic brake fluids and other prepared liquids for hydraulic transmission not containing petroleum oil or bituminous mineral oil, or containing < 70 % petroleum oil or bituminous mineral oil by weight

    3820

    Anti-freezing preparations and prepared de-icing fluids (excl. prepared additives for mineral oils or other liquids used for the same purposes as mineral oils)

    3823 13

    Tall oil fatty acids, industrial

    3827 90

    Mixtures containing halogenated derivatives of methane, ethane or propane (excl. those of subheadings 3824.71.00 to 3824.78.00)

    3824 81

    Mixtures and preparations containing oxirane (ethylene oxide)

    3824 84

    Mixtures and preparations containing aldrin (ISO), camphechlor (ISO) (toxaphene), chlordane (ISO), chlordecone (ISO), DDT (ISO) (clofenotane (INN), 1,1,1-trichloro-2,2 -bis(p-chlorophenyl)ethane), dieldrin (ISO, INN), endosulfan (ISO), endrin (ISO), heptachlor (ISO) or mirex (ISO)

    3824 99

    Chemical products and preparations of the chemical or allied industries, incl. those consisting of mixtures of natural products, n.e.s.

    3825 90

    Residual products of the chemical or allied industries, n.e.s. (excl. waste)

    3826

    Biodiesel and mixtures thereof, not containing or containing < 70 % by weight of petroleum oils or oils obtained from bituminous minerals

    3901 40

    Ethylene-alpha-olefin copolymers, having a specific gravity of < 0,94, in primary forms

    3902 20

    Polyisobutylene, in primary forms

    3902 30

    Propylene copolymers, in primary forms

    3902 90

    Polymers of propylene or of other olefins, in primary forms (excl. polypropylene, polyisobutylene and propylene copolymers)

    3903 19

    Polystyrene, in primary forms (excl. expansible)

    3903 90

    Polymers of styrene, in primary forms (excl. polystyrene, styrene-acrylonitrile copolymers (SAN) and acrylonitrile-butadiene-styrene (ABS))

    3904 10

    Poly(vinyl chloride), in primary forms, not mixed with any other substances

    3904 50

    Vinylidene chloride polymers, in primary forms

    3905

    Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers, in primary forms

    3906

    Acrylic polymers, in primary forms

    3907 21

    Polyethers, in primary forms (excl. polyacetals and goods of 3002 10)

    3907 40

    Polycarbonates, in primary forms

    3907 70

    Poly(lactic acid), in primary forms

    3907 91

    Unsaturated polyallyl esters and other polyesters, in primary forms (excl. polycarbonates, alkyd resins, poly(ethylene terephthalate) and poly(lactic acid))

    3908

    Polyamides, in primary forms

    3909 20

    Melamine resins, in primary forms

    3909 39

    Amino-resins, in primary forms (excl. urea, thiourea and melamine resins and mdi)

    3909 40

    Phenolic resins, in primary forms

    3909 50

    Polyurethanes, in primary forms

    3910

    Silicones in primary forms

    3911 90

    Polysulphides, polysulphones and other polymers and prepolymers produced by chemical synthesis, n.e.s., in primary form

    3912

    Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms

    3915 20

    Waste, parings and scrap, of polymers of styrene

    3917

    Tubes, pipes and hoses, and fittings therefor (for example joints, elbows, flanges), of plastics

    3920 10

    Plates, sheets, film, foil and strip, of non-cellular polymers of ethylene, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 )

    3920 61

    Plates, sheets, film, foil and strip, of non-cellular polycarbonates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. those of poly(methyl methacrylate), self-adhesive products, and floor, wall and ceiling coverings of heading 3918 )

    3920 69

    Plates, sheets, film, foil and strip, of non-cellular polyesters, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. polycarbonates, polythylene terephthalate and other unsaturated polyesters, self-adhesive products, and floor, wall and ceiling coverings in heading 3918 )

    3920 73

    Plates, sheets, film, foil and strip, of non-cellular cellulose acetates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 )

    3920 91

    Plates, sheets, film, foil and strip, of non-cellular poly(vinyl butyral), not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 )

    3921 19

    Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)

    3922 90

    Bidets, lavatory pans, flushing cisterns and similar sanitary ware, of plastics (excl. baths, shower-baths, sinks, washbasins, lavatory seats and covers)

    3925 20

    Doors, windows and their frames and thresholds for doors, of plastics

    4002

    Synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip; mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, in primary forms or in plates, sheets or strip

    4005

    Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip

    4006 10

    ‘Camel-back’ strips of unvulcanised rubber, for retreading rubber tyres

    4008 21

    Plates, sheets and strip, of non-cellular rubber

    4009 12

    Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, with fittings

    4009 41

    Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, without fittings

    4010

    Conveyor or transmission belts or belting, of vulcanised rubber

    4011 20

    New pneumatic tyres, of rubber, of a kind used for buses and lorries

    4011 80

    New pneumatic tyres, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines

    4012

    Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber

    4016 93

    Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)

    4407

    Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm

    4408 10

    Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm

    4411 13

    Medium density fibreboard (MDF) of wood, of a thickness > 5 mm but <= 9 mm

    4411 94

    Fibreboard of wood or other ligneous materials, whether or not agglomerated with resins or other organic bonding agents, of a density of <= 0,5 g/cm3 (excl. medium density fibreboard (MDF); particle board, whether or not bonded with one or more sheets of fibreboard; laminated wood with a layer of plywood; cellular wood panels of which both sides are fibreboard; paperboard; identifiable furniture components)

    4412

    Plywood, veneered panel and similar laminated wood

    4416

    Casks, barrels, vats, tubs and other coopers’ products parts thereof, of wood, incl. staves

    4418 40

    Wooden shuttering for concrete constructional work (excl. plywood boarding)

    4418 60

    Posts and beams, of wood

    4418 79

    Flooring panels, assembled, of wood other than bamboo (excl. multilayer panels and panels for mosaic floors)

    4503

    Articles of natural cork

    4504

    Agglomerated cork (with or without a binding substance) and articles of agglomerated cork

    4701

    Mechanical wood pulp, not chemically treated

    4703

    Chemical wood pulp, soda or sulphate (excl. dissolving grades)

    4704

    Chemical wood pulp, sulphite (excl. dissolving grades)

    4705

    Wood pulp obtained by a combination of mechanical and chemical pulping processes

    4706

    Pulps of fibres derived from recovered (waste and scrap) paper or paperboard or of other fibrous cellulosic material

    4707

    Recovered (waste and scrap) paper or paperboard

    4802 20

    Paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper and paperboard, uncoated, in rolls or in square or rectangular sheets, of any size

    4802 40

    Wallpaper base, uncoated

    4802 58

    Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or in square or rectangular sheets, of any size, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, weighing > 150 g/m2, n.e.s.

    4802 61

    Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls of any size, of which > 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process, n.e.s.

    4804

    Uncoated kraft paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. goods of heading 4802 or 4803 )

    4805

    Other paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, not worked other than as specified in note 3 to this chapter, n.e.s.

    4806

    Vegetable parchment, greaseproof papers, tracing papers and glassine and other glazed transparent or translucent papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

    4807

    Composite paper and paperboard (made by sticking flat layers of paper or paperboard together with an adhesive), not surface-coated or impregnated, whether or not internally reinforced, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

    4808

    Corrugated paper and paperboard (with or without glued flat surface sheets), creped, crinkled, embossed or perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. goods of heading 4803 )

    4809

    Carbon paper, self-copy paper and other copying or transfer papers, incl. coated or impregnated paper for duplicator stencils or offset plates, whether or not printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

    4810

    Paper and paperboard, coated on one or both sides with kaolin (China clay) or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. all other coated papers and paperboards)

    4811 10

    Tarred, bituminised or asphalted paper and paperboard, in rolls or in square or rectangular sheets, of any size

    4811 51

    Paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size, bleached and weighing > 150 g/m2 (excl. adhesives)

    4811 59

    Paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size (excl. bleached and weighing > 150 g/m2, and adhesives)

    4811 60

    Paper and paperboard, coated, impregnated or covered with wax, paraffin wax, stearin, oil or glycerol, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 and 4818 )

    4811 90

    Paper, paperboard, cellulose wadding and webs of soft cellulose, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 , 4810 and 4818 , and of subheading 4811.10 to 4811.60)

    4814 90

    Wallpaper and similar wallcoverings of paper, and window transparencies of paper (excl. wallcoverings of paper, consisting of paper coated or covered, on the face side, with a grained, embossed, coloured or design-printed or otherwise decorated layer of plastics)

    4819 20

    Folding cartons, boxes and cases, of non-corrugated paper or paperboard

    4822

    Bobbins, spools, cops and similar supports of paper pulp, paper or paperboard, whether or not perforated or hardened

    4823

    Paper, paperboard, cellulose wadding and webs of cellulose fibres, in strips or rolls of a width <= 36 cm, in rectangular or square sheets of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square, and articles of paper pulp, paper, paperboard, cellulose wadding or webs or cellulose fibres, n.e.s.

    4906

    Plans and drawings for architectural, engineering, industrial, commercial, topographical or similar purposes, being originals drawn by hand; handwritten texts; photographic reproductions on sensitised paper and carbon copies of the foregoing

    5105

    Wool and fine or coarse animal hair, carded or combed, incl. combed wool in fragments

    5106

    Carded wool yarn (excl. that put up for retail sale)

    5107

    Yarn of combed wool (excl. that put up for retail sale)

    5112

    Woven fabrics of combed wool or of combed fine animal hair (excl. fabrics for technical purposes of heading 5911 )

    5205

    Cotton yarn other than sewing thread, containing >= 85 % cotton by weight (excl. that put up for retail sale)

    5206 42

    Multiple (folded) or cabled cotton yarn containing predominantly, but < 85 % cotton by weight, of combed fibres and with a linear density of 232,56 decitex to < 714,29 decitex (> mn 14 to mn 43) per single yarn (excl. sewing thread and yarn put up for retail sale)

    5209 11

    Plain woven fabrics of cotton, containing >= 85 % cotton by weight and weighing > 200 g/m2, unbleached

    5211

    Woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2

    5308

    Yarn of other vegetable textile fibres; paper yarn

    5402 63

    Multiple (folded) or cabled filament yarn of polypropylene, incl. monofilament of < 67 decitex (excl. sewing thread, yarn put up for retail sale and textured yarn)

    5403

    Artificial filament yarn, incl. artificial monofilament of < 67 decitex (excl. sewing thread and yarn put up for retail sale)

    5404

    Synthetic monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm; strip and the like, e.g. artificial straw, of synthetic textile material, with an apparent width of <= 5 mm

    5407 30

    Woven fabrics of synthetic filament yarn, incl. monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm, consisting of layers of parallel textile yarns superimposed on each other at acute or right angles, the layers being bonded at the intersections of the yarns by an adhesive or by thermal bonding

    5501

    Synthetic filament tow as specified in note 1 to Chapter 55

    5502

    Artificial filament tow as specified in note 1 to Chapter 55

    5503

    Synthetic staple fibres, not carded, combed or otherwise processed for spinning

    5504 90

    Artificial staple fibres, not carded, combed or otherwise processed for spinning (excl. those of viscose rayon)

    5506

    Synthetic staple fibres, carded, combed or otherwise processed for spinning

    5507

    Artificial staple fibres, carded, combed or otherwise processed for spinning

    5512 21

    Woven fabrics containing >= 85 % acrylic or modacrylic staple fibres by weight, unbleached or bleached

    5512 99

    Woven fabrics containing >= 85 % synthetic staple fibres by weight, dyed, made of yarn of different colours or printed (excl. those of acrylic, modacrylic or polyester staple fibres)

    5516

    Woven fabrics of artificial staple fibres

    5601 29

    Wadding of textile materials and articles thereof (excl. of cotton or man-made fibres; sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, wadding and articles thereof, impregnated or covered with medicated substances or put up for retail for medical, surgical, dental or veterinary purposes, or impregnated, coated or covered with perfumes, make-up, soaps, cleansing agents, etc.)

    5601 30

    Textile flock and dust and mill neps

    5604

    Textile-covered rubber thread and cord; textile yarn, strip and the like of heading 5404 and 5405 , impregnated, coated, covered or sheathed with rubber or plastics (excl. imitation catgut, thread and cord with fish-hook attachments or otherwise put up as fishing line)

    5605

    Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , of textile fibres, combined with metal in the form of thread, strip or powder or covered with metal (excl. yarns manufactured from a mixture of textile fibres and metal fibres, with anti-static properties; yarns reinforced with metal wire; articles with the character of trimmings)

    5607 41

    Binder or baler twine, of polyethylene or polypropylene

    5801 27

    Warp pile fabrics, of cotton (excl. terry towelling and similar woven terry fabrics, tufted textile fabrics and narrow woven fabrics of heading 5806 )

    5803

    Gauze (excl. narrow woven fabrics of heading 5806 )

    5806 40

    Narrow fabrics consisting of warp without weft assembled by means of an adhesive (bolducs), with a width of <= 30 cm

    5901

    Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books, the manufacture of boxes and articles of cardboard or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations (excl. plastic-coated textile fabrics)

    5905

    Textile wallcoverings

    5908

    Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas-mantle fabric for incandescent gas mantles, whether or not impregnated (excl. wax-covered wicks of the taper variety, fuses and detonating fuses, wicks in the form of textile yarn and glass-fibre wicks)

    5910

    Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excl. those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber)

    5911 10

    Textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, incl. narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles (weaving beams)

    5911 31

    Textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing < 650 g/m2

    5911 32

    Textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing >= 650 g/m2

    5911 40

    Straining cloth of a kind used in oil-presses or for similar technical purposes, incl. that of human hair

    6001 99

    Pile fabrics, knitted or crocheted (excl. cotton or man-made fibres and ‘long pile’ fabrics)

    6003

    Knitted or crocheted fabrics, of a width <= 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated)

    6005 36

    Unbleached or bleached warp knit fabrics of synthetic fibres (incl. those made on galloon knitting machines), of a width of > 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated)

    6005 44

    Printed warp knit fabrics of artificial fibres (incl. those made on galloon knitting machines), of a width of > 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated)

    6006 10

    Fabrics, knitted or crocheted, of a width of > 30 cm, of wool or fine animal hair (excl. warp knit fabrics (incl. those made on galloon knitting machines), those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated)

    6309

    Worn clothing and clothing accessories, blankets and travelling rugs, household linen and articles for interior furnishing, of all types of textile materials, incl. all types of footwear and headgear, showing signs of appreciable wear and presented in bulk or in bales, sacks or similar packings (excl. carpets, other floor coverings and tapestries)

    6802 92

    Calcareous stone, in any form (excl. marble, travertine and alabaster, tiles, cubes and similar articles of subheading 6802.10, imitation jewellery, clocks, lamps and lighting fittings and parts thereof, original sculptures and statuary, setts, curbstones and flagstones)

    6804 23

    Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of natural stone (excl. of agglomerated natural abrasives or ceramics, perfumed pumice stones, hand sharpening or polishing stones, and grinding wheels etc. specifically for dental drill engines)

    6806

    Slag-wool, rock-wool and similar mineral wools; exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials; mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials, other than those of heading 6811 or 6812 or of Chapter 69

    6807

    Articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch

    6809 19

    Boards, sheets, panels, tiles and similar articles, of plaster or compositions based on plaster (excl. ornamented, faced or reinforced with paper or paperboard only, and with plaster agglomerated articles for heat-insulation, sound-insulation or sound absorption)

    6810 91

    Prefabricated structural components for building or civil engineering of cement, concrete or artificial stone, whether or not reinforced

    6811

    Articles of asbestos-cement, cellulose fibre-cement or the like

    6813

    Friction material and articles thereof, e.g., sheets, rolls, strips, segments, discs, washers, pads, not mounted, for brakes, clutches or the like, with a basis of asbestos, other mineral substances or cellulose, whether or not combined with textile or other materials (excl. mounted friction material)

    6814 90

    Worked mica and articles of mica (excl. electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, mica in the form of christmas tree decorations, and plates, sheets and strips of agglomerated or reconstituted mica, whether or not on supports)

    6901

    Bricks, blocks, tiles and other ceramic goods of siliceous fossil meals, e.g. kieselguhr, tripolite or diatomite, or of similar siliceous earths

    6904 10

    Building bricks (excl. those of siliceous fossil meals or similar siliceous earths, and refractory bricks of heading 6902 )

    6905

    Roofing tiles, chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods

    6906 00

    Ceramic pipes, conduits, guttering and pipe fittings (excl. of siliceous fossil meals or similar siliceous earths, refractory ceramic goods, chimney liners, pipes specifically manufactured for laboratories, insulating tubing and fittings and other piping for electrotechnical purposes)

    6907 22

    Ceramic flags and paving, hearth or wall tiles, of a water absorption coefficient by weight > 0,5 % but <= 10 % (excl. mosaic cubes and finishing ceramics)

    6907 40

    Finishing ceramics

    6909 90

    Ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods (excl. general-purpose storage vessels for laboratories, containers for shops and household articles)

    7002

    Glass in balls (other than microspheres of heading 7018 ), rods or tubes, unworked

    7003

    Cast glass and rolled glass, in sheets or profiles, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked

    7004

    Sheets of glass, drawn or blown, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked

    7005

    Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked

    7007 11

    Toughened (tempered) safety glass, of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels and other vehicles

    7007 29

    Laminated safety glass (excl. glass of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels or other vehicles, multiple-walled insulating units)

    7011 10

    Glass envelopes, incl. bulbs and tubes, open, and glass parts thereof, without fittings, for electric lighting

    72

    Iron and steel

    7301

    Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel

    7302

    Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails

    7303

    Tubes, pipes and hollow profiles, of cast iron

    7304

    Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

    7305

    Tubes and pipes, n.e.s. (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel

    7306

    Tubes, pipes and hollow profiles n.e.s. (for example, open seam or welded, riveted or similarly closed), of iron or steel

    7307

    Tube or pipe fittings (for example couplings, elbows, sleeves), of iron or steel

    7308

    Structures and parts of structures (for example bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406

    7309

    Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

    7310

    Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material (other than compressed or liquefied gas), of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s.

    7311

    Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport)

    7314 12

    Endless bands of stainless steel wire, for machinery

    7318 24

    Cotters and cotter pins, of iron or steel

    7320 20

    Helical springs, of iron or steel (excl. flat spiral springs, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers of Section 17)

    7322 90

    Air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel

    7324 29

    Baths of steel sheet

    7407

    Copper bars, rods and profiles

    7408

    Copper wire

    7409

    Copper plates, sheets and strip, of a thickness exceeding 0,15 mm

    7411

    Copper tubes and pipes

    7412

    Copper tube or pipe fittings (for example couplings, elbows, sleeves)

    7413

    Stranded wire, cables, plaited bands and the like, of copper (not electrically insulated)

    7415 21

    Washers, (incl. spring washers and spring lock washers), of copper

    7505

    Nickel bars, rods, profiles and wire

    7506

    Nickel plates, sheets, strip and foil

    7507

    Tubes, pipes and tube or pipe fittings (e.g., couplings, elbows, sleeves), of nickel

    7508

    Other articles of nickel

    7605

    Aluminium wire

    7606

    Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm

    7607 20

    Aluminium foil, backed, of a thickness (excl. any backing) of <= 0,2 mm (excl. stamping foils of heading 3212 , and foil made up as christmas tree decorating material)

    7608

    Aluminium tubes and pipes

    7609

    Aluminium tube or pipe fittings (for example couplings, elbows, sleeves)

    7610

    Structures and parts of structures (e.g., bridges and bridge-sections, towers, lattice masts, pillars and columns, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades), of aluminium (excl. prefabricated buildings of heading 9406 ); plates, rods, profiles, tubes and the like, prepared for use in structures, of aluminium

    7611

    Reservoirs, tanks, vats and similar containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport)

    7612

    Casks, drums, cans, boxes and similar containers, incl. rigid or collapsible tubular containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s.

    7613

    Aluminium containers for compressed or liquefied gas

    7616 10

    Nails, tacks, staples (other than those of heading 8305 ), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles

    7804

    Lead plates, sheets, strip and foil; lead powders and flakes

    7905

    Zinc plates, sheets, strip and foil

    8001

    Unwrought tin

    8003

    Tin bars, rods, profiles and wire

    8007

    Articles of tin

    8101 10

    Tungsten powders

    8102

    Molybdenum and articles thereof, including waste and scrap

    8105 90

    Articles of cobalt

    8109

    Zirconium and articles thereof, including waste and scrap

    8202 20

    Bandsaw blades of base metal

    8207

    Interchangeable tools, for hand tools, whether or not power-operated, or for machine tools (for example for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools

    8208 10

    Knives and cutting blades, for machines or for mechanical appliances – for metalworking

    8208 20

    Knives and cutting blades, for machines or for mechanical appliances – for wood-working

    8208 30

    Knives and cutting blades, for machines or for mechanical appliances – used by the food industry

    8208 90

    Knives and cutting blades, for machines or for mechanical appliances – other

    8301 20

    Locks used for motor vehicles, of base metal

    8301 70

    Keys presented separately

    8302 30

    Other mountings, fittings and similar articles suitable for motor vehicles

    8307

    Flexible tubing of base metal, with or without fittings

    8309

    Stoppers, caps and lids, incl. crown corks, screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal

    8402

    Steam or other vapour generating boilers (excl. central heating hot water boilers capable also of producing low pressure steam); superheated water boilers; parts thereof

    8404

    Auxiliary plant for use with boilers of heading 8402 or 8403 , e.g. economizers, superheaters, soot removers and gas recoverers; condensers for steam or other vapour power units; parts thereof

    8405

    Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers; parts thereof (excl. coke ovens, electrolytic process gas generators and carbide lamps)

    8406

    Steam turbines and other vapour turbines; parts thereof

    8407 21

    Spark-ignition outboard motors for marine propulsion

    8407 29

    Spark-ignition reciprocating or rotary engines, for marine propulsion (excl. outboard motors)

    8408

    Compression-ignition internal combustion piston engine (diesel or semi-diesel engine)

    8409 99

    Parts suitable for use solely or principally with compression-ignition internal combustion piston engine (diesel or semi-diesel engine), n.e.s.

    8410

    Hydraulic turbines, water wheels, and regulators therefor (excl. hydraulic power engines and motors of heading 8412 )

    8412

    Engines and motors (excluding steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, turbojets, turbopropellers, and gas turbines); parts thereof

    8413

    Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; parts thereof

    8414 10

    Vacuum pumps

    8414 90

    Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters – Parts

    8415 83

    Other air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated – not incorporating a refrigerating unit

    8416

    Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances; parts thereof

    8417

    Industrial or laboratory furnaces and ovens, including incinerators, non-electric

    8419 19

    Instantaneous or storage water heaters, non-electric (excl. instantaneous gas water heaters and boilers or water heaters for central heating)

    8419 40

    Distilling or rectifying plant

    8419 50

    Heat-exchange units (excl. those used with boilers)

    8419 89

    Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, sterilising, pasteurising, steaming, evaporating, vaporising, condensing or cooling, n.e.s. (excl. machinery used for domestic purposes and furnaces, ovens and other equipment of heading 8514 )

    8419 90

    Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s.

    8420 99

    Parts of calendering or other rolling machines, other than for metals or glass, and cylinders therefor – Other

    Ex  84 21

    Centrifuges, incl. centrifugal dryers (excl. those for isotope separation); filtering or purifying machinery and apparatus, for liquids or gases (excl. such machinery and apparatus for water and other beverages, and excl. artificial kidneys; parts thereof

    8424 89

    Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.

    8424 90

    Parts of fire extinguishers, spray guns and similar appliances, steam or sand blasting machines and similar jet projecting machines and machinery and apparatus for projecting, dispersing or spraying liquids or powders, n.e.s.

    8425 11

    Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles powered by electric motor

    8425 31

    Winches and capstans powered by electric motor

    8426

    Ships’ derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane

    8427

    Fork-lift trucks; other works trucks fitted with lifting or handling equipment (excl. straddle carriers and works trucks fitted with a crane)

    8428 20

    Pneumatic elevators and conveyors

    8428 31

    Continuous-action elevators and conveyors for goods or materials, for underground use (excl. pneumatic elevators and conveyors)

    8428 32

    Other continuous-action elevators and conveyors, for goods or materials – Other, bucket type

    8428 33

    Other continuous-action elevators and conveyors, for goods or materials – Other, belt type

    8428 39

    Continuous-action elevators and conveyors, for goods or materials (excl. those for underground use and bucket, belt or pneumatic types)

    8428 70

    Industrial robots

    8428 90

    Other machinery

    8429

    Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and roadrollers

    8430

    Moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors, n.e.s.; snowploughs and snowblowers

    8431 20

    Parts of fork-lift trucks and other works trucks fitted with lifting or handling equipment, n.e.s.

    8431 39

    Parts of machinery of heading 8428 , n.e.s.

    8431 41

    Buckets, shovels, grabs and grips for machinery of heading 8426 , 8429 and 8430

    8431 49

    Parts of machinery of heading 8426 , 8429 and 8430 , n.e.s.

    8439 10

    Machinery for making pulp of fibrous cellulosic material

    8439 30

    Machinery for finishing paper or paperboard

    8440 90

    Bookbinding machinery, including book-sewing machines – Parts

    8441 30

    Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding

    8442 40

    Parts of the foregoing machinery, apparatus or equipment

    8443 13

    Other offset printing machinery

    8443 15

    Letterpress printing machinery, other than reel fed, excluding flexographic printing

    8443 16

    Flexographic printing machinery

    8443 17

    Gravure printing machinery

    8443 19

    Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 (excl. hectograph or stencil duplicating machines, addressing machines and other office printing machines of heading 8469 to 8472 , ink jet printing machines and offset, flexographic, letterpress and gravure printing machinery)

    8443 91

    Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442

    8444

    Machines for extruding, drawing, texturing or cutting man-made textile materials

    8448

    Auxiliary machinery for use with machines of heading 8444 , 8445 , 8446 or 8447 , e.g. dobbies, jacquards, automatic stop motions, shuttle changing mechanisms; parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444 , 8445 , 8446 or 8447 , e.g. spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles

    8451 10

    Dry-cleaning machines

    8451 29

    Drying machines – Other

    8451 30

    Ironing machines and presses (including fusing presses)

    8451 90

    Machinery (other than machines of heading 8450 ) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics – Parts

    8453

    Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather (excl. drying machines, spray guns, machines for the dehairing of pigs, sewing machines and general purpose presses); parts thereof

    8454

    Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries; parts thereof

    8455 22

    Cold-rolling mills for metal (excl. tube mills)

    8455 30

    Rolls for metal-rolling mills

    8456

    Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electro-discharge, electro-chemical, electron beam, ionic-beam or plasma arc processes; water-jet cutting machines

    8457

    Machining centres, unit construction machines (single station) and multi-station transfer machines for working metal

    8458

    Lathes (including turning centres) for removing metal

    8459

    Machine tools, incl. way-type unit head machines, for drilling, boring, milling, threading or tapping (excl. lathes and turning centres of heading 8458 , gear cutting machines of heading 8461 and hand-operated machines)

    8460

    Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products (excl. gear cutting, gear grinding or gear finishing machines of heading 8461 and machines for working in the hand)

    8461

    Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal, or cermets, not elsewhere specified or included

    8462

    Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified in previous headings

    8463

    Machine tools for working metal, sintered metal carbides or cermets, without removing material (excl. forging, bending, folding, straightening and flattening presses, shearing machines, punching or notching machines, presses and machines for working in the hand)

    8464

    Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold-working glass (excl. machines for working in the hand)

    8465

    Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials

    8466

    Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any type of tool for working in the hand

    8467

    Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof

    8468

    Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting (other than those of heading 8515 ); gas-operated surface tempering machines and appliances; parts thereof

    Ex  84 71

    Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included, excluding other units of automatic data-processing machines of CN code 8471 80 and excluding storage units for automatic data-processing machines not elsewhere specified corresponding to the CN code 8471 70 98

    8472 10

    Duplicating machines

    8472 30

    Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps

    8473

    Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472

    8474

    Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand; parts thereof

    8475

    Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware (excl. furnaces and heating apparatus for manufacturing toughened glass); parts thereof

    8477

    Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter, parts thereof

    8479 10

    Machinery for public works, building or the like

    8479 30

    Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork

    8479 50

    Industrial robots, not elsewhere specified or included

    8479 81

    Machinery for treating metal, incl. electric wire coil-winders, n.e.s. (excl. industrial robots, furnaces, dryers, spray guns and the like, high-pressure cleaning equipment and other jet cleaners, rolling mills or machines, machine tools and rope or cable-making machines)

    8479 82

    Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines, n.e.s. (excl. industrial robots)

    8479 89

    Machines and mechanical appliances, n.e.s.

    8479 90

    Machines and mechanical appliances having individual functions, not specified or included elsewhere in Chapter 84 – Parts

    8480

    Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics

    8481 10

    Pressure-reducing valves

    8481 20

    Valves for oleohydraulic or pneumatic transmissions

    8481 30

    Check (non-return) valves for pipes, boiler shells, tanks, vats or the like

    8481 40

    Safety or relief valves

    8482

    Ball or roller bearings (excl. steel balls of heading 7326 ); parts thereof

    8483

    Transmission shafts, incl. camshafts and crankshafts, and cranks; bearing housings and plain shaft bearings for machines; gears and gearing; ball or roller screws, gear boxes and other speed changers, incl. torque converters; flywheels and pulleys, incl. pulley blocks, clutches and shaft couplings, incl. universal joints; parts thereof

    8484

    Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals

    8485

    Machines for additive manufacturing

    8486

    Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 9 c to Chapter 84; parts and accessories, n.e.s.

    8487

    Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in Chapter 84

    8501

    Electric motors and generators (excluding generating sets)

    8502

    Electric generating sets and rotary converters

    8503

    Parts suitable for use solely or principally with the machines of heading 8501 or 8502

    ▼M28

    8504

    Electrical transformers, static converters (for example, rectifiers) and inductors

    ▼M28 —————

    ▼M26

    8505

    Electromagnets (excl. magnets for medical use); permanent magnets and articles intended to become permanent magnets after magnetization; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads; parts thereof

    8506

    Primary cells and primary batteries; parts thereof

    8507

    Electric accumulators, including separators therefor, whether or not rectangular (including square); parts thereof

    8511

    Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines, e.g. ignition magnetos, magneto-dynamos, ignition coils, sparking plugs, glow plugs and starter motors; generators, e.g. dynamos and alternators, and cut-outs of a kind used in conjunction with such engines; parts thereof

    8512 20

    Electrical lighting or visual signalling equipment for motor vehicles (excl. lamps of heading 8539 )

    8512 90

    Parts of electrical lighting or signalling equipment, windscreen wipers, defrosters and demisters of a kind used for cycles and motor vehicles, n.e.s.

    Ex  85 14

    Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss), excluding bakery and biscuit ovens of line 85141910; other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss

    8515

    Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals, or cermets; parts thereof

    8516 80

    Electric heating resistors (excl. those of agglomerated coal and graphite)

    8517 61

    Base stations of apparatus for the transmission or reception of voice, images or other data

    8523 51

    Solid-state, non-volatile data storage devices for recording data from an external source (excl. goods of Chapter 37)

    8525

    Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders

    8526

    Radar apparatus, radio navigational aid apparatus and radio remote control apparatus

    8527 21

    Radio-broadcast receivers not capable of operating without an external source of power, of a kind used in motor vehicles, combined with sound recording or reproducing apparatus

    8528 49

    Cathode-ray tube monitors (CRT) (excl. computer monitors, with tv receiver)

    8530

    Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (excl. mechanical or electromechanical equipment of heading 8608 ); parts thereof

    8532 10

    Fixed capacitors designed for use in 50/60 hz circuits and having a reactive power-handling capacity of >= 0,5 kvar (power capacitors)

    8532 29

    Fixed electrical capacitors (excl. tantalum, aluminium electrolytic, ceramic, paper, plastic and power capacitors)

    8532 30

    Variable or adjustable (pre-set) electrical capacitors

    8532 90

    Parts of electrical (pre-set) capacitors, fixed, variable or adjustable, n.e.s.

    8533 29

    Other fixed resistors – Other

    8533 90

    Parts of electrical resistors, incl. rheostats and potentiometers, n.e.s.

    8534

    Printed circuits

    8535

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, e.g., switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes, for a voltage > 1 000 V (excl. control desks, cabinets, panels etc. of heading 8537 )

    8538

    Parts suitable for use solely or principally with the apparatus of heading 8535 , 8536 or 8537

    8539 29

    Filament lamps, electric (excl. tungsten halogen lamps, lamps of a power <= 200 W and for a voltage > 100 V and ultraviolet or infra-red lamps)

    8539 39

    Discharge lamps (excl. hot-cathode fluorescent lamps, mercury or sodium vapour lamps, metal halide lamps and ultraviolet lamps)

    8539 41

    Arc lamps

    8539 51

    Light-emitting diode (LED) modules

    8539 52

    Light-emitting diode (LED) lamps

    8540

    Thermionic, cold cathode or photo-cathode valves and tubes, e.g. vacuum or vapour or gas filled valves and tubes, mercury arc rectifying valves and tubes, cathode ray tubes and television camera tubes; parts thereof

    8541 30

    Thyristors, diacs and triacs (excl. photosensitive semiconductor devices)

    8541 41

    Light-emitting diodes (LED)

    8541 42

    Photovoltaic cells not assembled in modules or made up into panels

    8541 43

    Photovoltaic cells assembled in modules or made up into panels

    8543 10

    Particle accelerators

    8543 20

    Signal generators, electrical

    8543 30

    Machines and apparatus for electroplating, electrolysis or electrophoresis

    8544 11

    Winding wire for electrical purposes, of copper, insulated

    8544 30

    Ignition wiring sets and other wiring sets for vehicles, aircraft or ships

    8544 49

    Electric conductors, for a voltage <= 1 000 V insulated, not fitted with connectors, n.e.s.

    8544 60

    Electric conductors, for a voltage > 1 000 V insulated, n.e.s.

    8544 70

    Optical fibre cables made up of individually sheathed fibres, whether or not containing electric conductors or fitted with connectors

    8545 20

    Carbon brushes for electrical purposes

    8547

    Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal, e.g., threaded sockets, incorporated during moulding solely for purposes of assembly (other than insulators of heading 8546 ); electrical conduit tubing and joints therefor, of base metal lined with insulating material

    8549

    Electrical and electronic waste and scrap

    8602

    Rail locomotives (excl. those powered from an external source of electricity or by accumulators); locomotive tenders

    8604

    Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles)

    8606

    Railway or tramway goods vans and wagons (excluding self-propelled and luggage vans and post office coaches)

    8701 21

    Road tractors for semi-trailers – With only compression-ignition internal combustion piston engine (diesel or semi-diesel)

    8701 22

    Road tractors for semi-trailers – With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion

    8701 23

    Road tractors for semi-trailers – With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion

    8701 24

    Road tractors for semi-trailers – With only electric motor for propulsion

    8701 30

    Track-laying tractors (excluding pedestrian-controlled)

    8703 10

    Vehicles for the transport of < 10 persons on snow; golf cars and similar vehicles

    Ex 8703 23

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with only spark-ignition internal combustion reciprocating piston engine of a cylinder capacity > 1 900  cm3 but <= 3 000  cm3 (excluding ambulances)

    Ex 8703 24

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with only spark-ignition internal combustion reciprocating piston engine of a cylinder capacity > 3 000  cm3 (excluding ambulances)

    Ex 8703 32

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with only diesel engine of a cylinder capacity > 1 900  cm3 but <= 2 500  cm3 (excluding ambulances)

    Ex 8703 33

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with only diesel engine of a cylinder capacity > 2 500  cm3 (excluding ambulances)

    8703 40

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion (excl. plug-in hybrids)

    8703 50

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with both diesel engine and electric motor as motors for propulsion (excl. plug-in hybrids)

    8703 60

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power

    8703 70

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with both diesel engine and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power

    8703 80

    Motor cars and other motor vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with only electric motor for propulsion

    8703 90

    Motor cars and other vehicles principally designed for the transport of < 10 persons, incl. station wagons and racing cars, with engines other than internal combustion piston engine or electric motor

    Ex  87 04

    Motor vehicles for the transport of goods, incl. chassis with engine and cab, excluding vehicles of CN codes 8704 21 91 and 8704 21 99 with engines of a cylinder capacity not exceeding 1 900  cm3

    8705

    Special purpose motor vehicles (other than those principally designed for the transport of persons or goods), e.g. breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops and mobile radiological units

    8709 90

    Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles – Parts

    8716 20

    Self-loading or self-unloading trailers and semi-trailers for agricultural purposes

    8716 39

    Other trailers and semi-trailers for the transport of goods – Other

    8716 90

    Parts of trailers and semi-trailers and other vehicles not mechanically propelled, n.e.s.

    8903

    Yachts and other vessels for pleasure or sports; rowing boats and canoes

    8904

    Tugs and pusher craft

    8905

    Light-vessels, fire-floats, dredgers, floating cranes, and other vessels the navigability of which is subsidiary to their main function; floating docks, floating or submersible drilling or production platforms

    9001 10

    Optical fibres, optical fibre bundles and cables (excl. made up of individually sheathed fibres of heading 8544 )

    9002 11

    Objective lenses for cameras, projectors or photographic enlargers or reducers

    9002 19

    Objective lenses (excl. for cameras, projectors or photographic enlargers or reducers)

    9005

    Binoculars, monoculars, other optical telescopes, and mountings therefor; other astronomical instruments and mountings therefor (excl. instruments for radio-astronomy and other instruments or apparatus specified elsewhere)

    9007

    Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus (excl. video equipment)

    9010

    Apparatus and equipment for photographic or cinematographic laboratories, not elsewhere specified in Chapter 90; negatoscopes; projection screens

    9013

    Lasers, other than laser diodes; other optical appliances and instruments, not specified or included elsewhere in Chapter 90

    9014

    Direction finding compasses; other navigational instruments and appliances (excl. radio navigational equipment); parts thereof

    9015

    Surveying, incl. photogrammetrical surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances (excl. compasses); rangefinders

    9024

    Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics); parts thereof

    9025 90

    Parts and accessories for hydrometers, areometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, n.e.s.

    9026

    Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014 , 9015 , 9028 or 9032

    9027

    Instruments and apparatus for physical or chemical analysis, (for example polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light, (including exposure meters); microtomes

    9029

    Revolution counters, production counters, taximeters, milometers, pedometers and the like (excl. gas, liquid and electricity meters); speed indicators and tachometers (excl. those of heading 9014 and 9015 ); stroboscopes

    9030

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities (excluding meters of heading 9028 ); instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiations

    9031

    Measuring or checking instruments, appliances and machines not elsewhere specified in Chapter 90; profile projectors

    9032 81

    Other automatic regulating or controlling instruments and apparatus – Hydraulic or pneumatic – Other

    9401 10

    Seats for aircraft

    9401 20

    Seats for motor vehicles

    9403 30

    Wooden furniture of a kind used in offices

    9406

    Prefabricated buildings

    9503 00 75

    Plastic toys and models, incorporating a motor n.e.s. under heading 9503

    9503 00 79

    Toys and models not made of plastic, incorporating a motor n.e.s. under heading 9503

    9606

    Buttons, press-fasteners, snap-fasteners and press studs, button moulds and other parts of these articles; button blanks (excl. cuff links)

    9608 91

    Pen nibs and nib points

    9612 20

    Of man-made fibres, measuring less than 30 mm in width, permanently put in plastic or metal cartridges of a kind used in automatic typewriters, automatic data-processing equipment and other machines

    Ex98

    Complete industrial plants, except plants for the production of food and drinks, pharmaceuticals, medicines and medical devices

    ▼M26




    ANNEX XXIIIA

    List of goods as referred to in Article 3k(3aa)



    CN code

    Description

    2825

    Inorganic bases, metal oxides, hydroxides and peroxides, n.e.s.; Hydrazine and hydroxylamine and their inorganic salts

    2905 31

    Ethylene glycol (ethanediol)

    3812 10

    Prepared rubber accelerators

    3812 31

    Mixtures of oligomers of 2,2,4-trimethyl-1,2 -dihydroquinoline (TMQ)

    3812 39

    Anti-oxidising preparations and other compound stabilisers for rubber or plastics (excluding mixtures of oligomers of 2,2,4-trimethyl-1,2 -dihydroquinoline (TMQ))

    3816 00 90

    Refractory cements, mortars, concretes and similar compositions (excluding dolomite ramming mix), other than products of heading 3801

    3910

    Silicones in primary forms

    3911 90

    Polysulphides, polysulphones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms, excluding poly(1,3-phenylene methylphosphonate)

    3912 12

    Plasticised cellulose acetates, in primary forms

    3912 20

    Cellulose nitrates, including collodions, in primary forms

    3912 31

    Carboxymethylcellulose and its salts, in primary forms

    3912 39

    Cellulose ethers, in primary forms (excluding carboxymethylcellulose and its salts)

    3917 22

    Rigid tubes, pipes and hoses of polymers of propylene

    3917 29

    Rigid tubes, pipes and hoses, of other plastics

    4011 80

    New pneumatic tyres, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines

    7201

    Pig iron and spiegeleisen, in pigs, blocks or other primary forms

    7202 11

    Ferro-manganese, containing by weight more than 2 % of carbon

    7202 19

    Ferro-manganese, not containing by weight more than 2 % of carbon

    7202 21

    Ferro-silicon, containing by weight more than 55 % of silicon

    7202 29

    Ferro-silicon, containing by weight not more than 55 % of silicon

    7202 30

    Ferro-silico-manganese

    7202 41

    Ferro-chromium, containing by weight more than 4 % of carbon

    7202 49

    Ferro-chromium, containing by weight not more than 4 % of carbon

    7202 50

    Ferro-silico-chromium

    7202 60

    Ferro-nickel

    7202 70

    Ferro-molybdenum

    7202 80

    Ferro-tungsten and ferro-silico-tungsten

    7202 91

    Ferro-titanium and ferro-silico-titanium

    7202 93

    Ferro-niobium

    7202 99

    Other ferro-alloys

    7203

    Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms

    7204

    Ferrous waste and scrap; remelting scrap ingots of iron or steel

    7205

    Granules and powders of pig iron, spiegeleisen, iron or steel

    7206

    Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203 )

    7214

    Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling, n.e.s.

    7215 10

    Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished, n.e.s.

    7215 90

    Bars and rods, of iron or non-alloy steel, further worked than cold-formed or cold-finished, n.e.s.

    7217

    Wire of iron or non-alloy steel

    7221

    Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel

    7222 11

    Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, of stainless steel, of circular cross-section

    7222 19

    Bars and rods, not further worked than hot-rolled, hot-drawn or extruded (excluding of circular cross-section, of stainless steel)

    7222 20

    Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished

    7222 40

    Angles, shapes and sections of stainless steel

    7223

    Wire of stainless steel

    7227

    Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel

    7229 20

    Wire of silico-manganese steel

    7301 10

    Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements

    7302

    Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails

    7303

    Tubes, pipes and hollow profiles, of cast iron

    7304 11

    Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel

    7304 19

    Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excluding products of stainless steel or of cast iron)

    7304 22

    Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas

    7304 23

    Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excluding products of stainless steel or of cast iron)

    7304 29

    Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excluding products of stainless steel or of cast iron)

    7304 31

    Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled (cold-reduced)

    7304 39

    Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled (cold-reduced) (excluding cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)

    7304 41

    Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled (cold-reduced) (excluding line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)

    7304 49

    Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled (cold-reduced) (excluding line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas)

    7304 51

    Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled (cold-reduced) (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil)

    7304 59

    Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled (cold-reduced) (excluding line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil)

    7304 90

    Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excluding products of cast iron)

    7305 12

    Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter exceeding 406,4 mm, of iron or steel, longitudinally welded (excluding products submerged arc welded)

    7305 19

    Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter exceeding 406,4 mm, of iron or steel (excluding products longitudinally welded)

    7305 20

    Casing of a kind used in drilling for oil or gas, having circular cross-sections and an external diameter exceeding 406,4 mm, of iron or steel

    7305 31

    Tubes and pipes having circular cross-sections and an external diameter exceeding 406,4 mm, of iron or steel, longitudinally welded

    7305 90

    Tubes and pipes having circular cross-sections and an external diameter exceeding 406,4 mm, of iron or steel, welded (excluding line pipe of a kind used for oil or gas pipelines and casing of a kind used in drilling for oil or gas)

    7306 11

    Line pipe of a kind used for oil or gas pipelines, welded, of stainless steel, having a circular cross-section of an external diameter not exceeding 406,4 mm, or having a non-circular cross-section

    7306 19

    Line pipe of a kind used for oil or gas pipelines, of iron or steel, having a circular cross-section of an external diameter not exceeding 406,4 mm, or having a non-circular cross-section (excluding welded products of stainless steel)

    7306 21

    Casing and tubing of a kind used in drilling for oil or gas, welded, of stainless steel, having a circular cross-section of an external diameter not exceeding 406,4 mm, or having a non-circular cross-section

    7306 29

    Casing and tubing of a kind used in drilling for oil or gas, welded, of iron or steel, of an external diameter not exceeding 406,4 mm (excluding products welded and of stainless steel)

    7306 30

    Tubes, pipes and hollow profiles, welded, of circular cross-section of an external diameter not exceeding 406,4 mm, of iron or non-alloy steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used in drilling for oil or gas)

    7306 40

    Tubes, pipes and hollow profiles, welded, of circular cross-section of an external diameter not exceeding 406,4 mm, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used in drilling for oil or gas)

    7306 61

    Tubes, pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used in drilling for oil or gas)

    7306 69

    Tubes, pipes and hollow profiles, welded, of cross-section other than circular, rectangular or square, of iron or steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used in drilling for oil or gas)

    7306 90

    Tubes, pipes and hollow profiles, of iron or steel

    7411 10

    Tubes and pipes of refined copper

    7411 21

    Tubes and pipes of copper-zinc base alloys (brass)

    7411 22

    Tubes and pipes of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)

    7413

    Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated

    7606 11

    Plates, sheets and strip, of non-alloy aluminium, of a thickness exceeding 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)

    7606 12

    Plates, sheets and strip, of aluminium alloys, of a thickness exceeding 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)

    7606 91

    Plates, sheets and strip, of non-alloy aluminium, of a thickness exceeding 0,2 mm (other than square or rectangular)

    7608

    Aluminium tubes and pipes

    7609

    Aluminium tube or pipe fittings (for example couplings, elbows, sleeves)

    8207 13

    Rock-drilling or earth-boring tools, interchangeable, with working parts of cermets

    8207 19

    Rock-drilling or earth-boring tools, interchangeable, and parts therefor, with working parts of materials other than cermets

    8207 20

    Interchangeable dies for drawing or extruding metal

    8207 30

    Interchangeable tools for pressing, stamping or punching

    8207 40

    Tools for tapping or threading, interchangeable

    8207 50

    Tools for drilling, interchangeable (other than rock-drilling)

    8207 70

    Interchangeable tools for milling

    8207 80

    Interchangeable tools for turning

    8207 90

    Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, n.e.s.

    8412 31

    Pneumatic power engines and motors, linear-acting, (cylinders)

    8412 80

    Engines and motors (excluding steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, reaction engines, hydraulic power engines and motors, pneumatic power engines and motors)

    8413 20

    Hand pumps for liquids (excluding those of subheading 8413 11 and 8413 19 )

    8413 40

    Concrete pumps

    8413 82

    Liquid elevators

    8413 92

    Parts of liquid elevators

    8417 10

    Industrial or laboratory furnaces and ovens, non-electric, for the roasting, melting or other heat treatment of ores, pyrites or metals

    8430 20

    Snowploughs and snowblowers (excl. those mounted on railway wagons, motor vehicle chassis or lorries)

    8430 31

    Self-propelled coal or rock cutters and tunnelling machinery

    8430 61

    Tamping or compacting machinery, not self-propelled

    8456 11

    Machine tools for working any material by removal of material, operated by laser

    8456 12

    Machine tools for working any material by removal of material, operated by light or photon beam processes other than laser

    8456 30

    Machine tools for working any material by removal of material, operated by electro-discharge processes

    8456 50

    Water-jet cutting machines

    8456 90

    Machine tools for working any material by removal of material, operated by electro-chemical, electron beam or ionic-beam processes

    8461 50

    Sawing or cutting-off machines, for working metals, or cermets

    8467

    Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor

    8474 20

    Crushing or grinding machines for solid mineral substances

    8474 32

    Machines for mixing mineral substances with bitumen

    8480 10

    Moulding boxes for metal foundry

    8480 41

    Injection or compression-type moulds for metal or metal carbides

    8480 49

    Moulds for metal or metal carbides

    8480 50

    Moulds for glass

    8480 79

    Moulds for rubber or plastics (other than injection or compression types)

    8485

    Machines for additive manufacturing

    8501 10

    Motors of an output not exceeding 37,5 W

    8501 32

    DC motors and DC generators other than photovoltaic generators of an output exceeding 750 W but not exceeding 75 kW

    8501 34

    DC motors and DC generators other than photovoltaic generators of an output exceeding 375 kW

    8501 40

    AC motors, single-phase, n.e.s.

    8501 51

    AC motors, multi-phase, n.e.s., of an output not exceeding 750 W

    8501 52

    AC motors, multi-phase, n.e.s., of an output exceeding 750 W but not exceeding 75 kW

    8501 71

    Photovoltaic DC generators, of an output not exceeding 50 W

    8501 72

    Photovoltaic DC generators, of an output exceeding 50 W

    8501 80

    Photovoltaic AC generators

    8506 10

    Manganese dioxide primary cells and primary batteries

    8506 30

    Mercuric oxide primary cells and primary batteries

    8506 40

    Silver oxide primary cells and primary batteries

    8506 50

    Lithium primary cells and primary batteries

    8506 80

    Primary cells and primary batteries, n.e.s.

    8507 50

    Nickel-metal hydride electric accumulators

    8507 60

    Lithium-ion electric accumulators

    8507 80

    Electric accumulators (excluding lead-acid, nickel-cadmium, nickel-metal hydride and lithium-ion accumulators)

    8507 90

    Plates, separators and other parts of electric accumulators.

    8515 31

    Fully or partly automatic machines and apparatus for arc (including plasma arc) welding of metals

    8515 39

    Machines and apparatus for arc (including plasma arc) welding of metals, other than fully or partly automatic

    8515 80

    Electric machines and apparatus for laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse soldering, brazing or welding, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets

    8515 90

    Parts of machines and apparatus for brazing, soldering, welding, or for hot spraying of metals or cermets

    8904

    Tugs and pusher craft

    8905

    Light-vessels, fire-floats, dredgers, floating cranes, and other vessels the navigability of which is subsidiary to their main function; floating docks, floating or submersible drilling or production platforms

    9013 20

    Lasers, other than laser diodes

    9013 90

    Parts and accessories for lasers other than laser diodes, other optical appliances and instruments not elsewhere specified in Chapter 90

    9027 20

    Chromatographs and electrophoresis instruments

    9027 30

    Spectrometers, spectrophotometers and spectrographs using optical radiations, such as UV, visible, IR

    9027 50

    Instruments and apparatus using optical radiations (UV, visible, IR) (excluding spectrometers, spectrophotometers, spectrographs, and gas or smoke analysis apparatus)

    9027 90

    Microtomes; parts and accessories

    9030 10

    Instruments and apparatus for measuring or detecting ionising radiations

    9030 20

    Oscilloscopes and oscillographs

    9030 31

    Multimeters for voltage, current, resistance or electrical power, without recording device

    9030 33

    Instruments and apparatus for measuring or checking voltage, current, resistance or electrical power, without recording device (excluding multimeters)

    9030 84

    Instruments and apparatus for measuring or checking electrical quantities, with recording device n.e.s. (excluding appliances specially designed for telecommunications, multimeters, oscilloscopes and oscillographs, and apparatus for measuring or checking semiconductor wafers or devices)

    9030 90

    Parts and accessories for instruments and apparatus for measuring or checking electrical quantities or for instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations




    ANNEX XXIIIB

    List of goods as referred to in Article 3k(3ab)



    CN code

    Description

    3917 21

    Rigid tubes, pipes and hoses, of polymers of ethylene

    3917 39

    Flexible tubes, pipes and hoses, of plastics, whether or not with fittings, reinforced or otherwise combined with other materials (excluding those with a minimum burst pressure of 27,6 MPa)

    3917 40

    Tubes, pipes and hoses fittings (for example, joints, elbows, flanges), of plastics

    7305 11

    Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter exceeding 406,4 mm, of iron or steel, longitudinally submerged arc welded

    7307 11

    Tube or pipe fittings of non-malleable cast iron

    7307 19

    Cast tube or pipe fittings of iron or steel (excluding products of non-malleable cast iron)

    7307 21

    Flanges of stainless steel (excluding cast products)

    7307 23

    butt welding tube or pipe fittings of stainless steel (excluding cast products)

    7307 29

    Tube or pipe fittings of stainless steel (excluding cast products, flanges, threaded elbows, bends and sleeves and butt welding fittings)

    7307 91

    Flanges of iron or steel (excluding cast or stainless steel products)

    7307 92

    Threaded elbows, bends and sleeves, of iron or steel (excluding cast or stainless steel products)

    7307 93

    Butt welding fittings of iron or steel (excluding cast or stainless steel products)

    7307 99

    Tube or pipe fittings, of iron or steel (excluding cast or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings)

    7412

    Copper tube or pipe fittings (for example couplings, elbows, sleeves)

    8412 90

    Parts of engines and motors (excluding steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, turbojets)

    8413 70

    Centrifugal pumps, power-driven (excluding those of subheading 8413 11 and 8413 19 , fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, reciprocating positive displacement pumps and rotary positive displacement pumps)

    8413 91

    Parts of pumps for liquids

    8417 80

    Industrial or laboratory furnaces and ovens, non-electric, including incinerators (excluding those for the roasting, melting or other heat treatment of ores, pyrites or metals, bakery and biscuit ovens)

    8417 90

    Parts of industrial or laboratory furnaces, non-electric, including. incinerators

    8430 41

    Self-propelled boring or sinking machinery for boring earth or extracting minerals or ores (excl. those mounted on railway or tramway wagons, motor vehicle chassis or lorries and tunnelling machinery)

    8430 49

    Boring or sinking machinery for boring earth or extracting minerals or ores, not self-propelled and not hydraulic (excl. tunnelling machinery and hand-operated tools)

    8465 10

    Machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations without tool change between such operations

    8465 91

    Sawing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials

    8465 92

    Planing, milling or moulding (by cutting) machines, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials

    8465 95

    Drilling or mortising machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials

    8465 99

    Machine tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials n.e.s.

    8474 90

    Parts of machinery for working mineral substances of heading 8474

    8480 71

    Injection or compression-type moulds for rubber or plastics




    ▼C5

    ANNEX XXIV

    ▼M16

    List of goods as referred to in Article 3ea(5)(a)

    ▼M13



    CN code

    Name of the good

    2810 00 10

    Diboron trioxide

    2810 00 90

    Oxides of boron; boric acids (excluding diboron trioxide)

    2812 15 00

    Sulphur monochloride

    2814 10 00

    Anhydrous ammonia

    2825 20 00

    Lithium oxide and hydroxide

    2905 42 00

    Pentaerythritol ‘pentaerythrite’

    2909 19 90

    Ethers, acyclic and halogen, sulfo, nitro and nitroso derivatives thereof (excluding diethyl ether and tert-butyl ethyl ether (ethyl tertiary butyl ether, etbe))

    3006 92 00

    Waste pharmaceuticals

    3105 30 00

    Diammonium hydrogenorthophosphate (excluding those in tablets or similar forms, or in packages with a gross weight of <= 10 kg)

    3105 40 00

    Ammonium dihydrogenorthophosphate and mixtures thereof with diammonium hydrogenorthophosphate

    (excluding those in tablets or similar forms, or in packages with a gross weight of <= 10 kg).

    3811 19 00

    Anti-knock agents for petrol (excluding those based on lead compounds)

    ex  72 03

    Direct reduced iron or other spongy iron

    ex  72 04

    Ferrous scrap

    ▼M20




    ANNEX XXV

    List of crude oil and petroleum products referred to in Articles 3m and 3n



    CN Code

    Description

    ex 2709 00

    Petroleum oils and oils obtained from bituminous minerals, crude other than natural gas condensates of subheading CN 2709 00 10 from liquefied natural gas production plants.

    2710

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils

    ▼M16




    ANNEX XXVI

    List of goods as referred to in article 3o(1) and (2)



     

    CN code

    Name of the good

     

    7108

    Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form

     

    7112 91

    Waste and scrap of gold, including metal clad with gold but excluding sweepings containing other precious metals

    Ex

    7118 90

    Gold coins




    ANNEX XXVII

    List of goods as referred to in article 3o(3)



     

    CN code

    Name of the good

    Ex

    7113

    Articles of jewellery and parts thereof, of gold or containing gold, or of metal clad with gold

    Ex

    7114

    Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of gold, containing gold, or of metal clad with gold

    ▼M17




    ANNEX XXVIII

    Prices referred to in Article 3n(6)(a)

    ▼M23 —————

    ▼M23

    Price for crude oil

    ▼M19



    CN Code

    Description

    Price per barrel (USD)

    Date of application

    2709 00

    Petroleum oils and oils obtained from bituminous minerals, crude

    60

    5 December 2022

    ▼M23

    Prices for petroleum products



    CN Code

    Description

    Premium to crude oil/

    Discount to crude oil

    Price per barrel (USD)

    Date of application

     

    Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70  % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils

     

    2710 12

    Light oils and preparations

    2710 12 11

    For undergoing a specific process

    Discount to crude oil

    45

    5 February 2023

    2710 12 15

    For undergoing chemical transformation by a process other than those specified in respect of subheading 2710 12 11

    Discount to crude oil

    45

    5 February 2023

     

    For other purposes

    Special spirits

     

    2710 12 21

    White spirit

    Discount to crude oil

    45

    5 February 2023

    2710 12 25

    Other

    Discount to crude oil

    45

    5 February 2023

     

    Other

    Motor spirit

     

    2710 12 31

    Aviation spirit

    Premium to crude oil

    100

    5 February 2023

     

    Other, with a lead content

    Not exceeding 0,013  g per litre

     

    2710 12 41

    With an octane number (RON) of less than 95

    Premium to crude oil

    100

    5 February 2023

    2710 12 45

    With an octane number (RON) of 95  or more but less than 98

    Premium to crude oil

    100

    5 February 2023

    2710 12 49

    With an octane number (RON) of 98  or more

    Premium to crude oil

    100

    5 February 2023

    2710 12 50

    Exceeding 0,013  g per litre

    Premium to crude oil

    100

    5 February 2023

    2710 12 70

    Spirit type jet fuel

    Premium to crude oil

    100

    5 February 2023

    2710 12 90

    Other light oils

    Premium to crude oil

    100

    5 February 2023

    2710 19

    Other

     

     

    Medium oils

    2710 19 11

    For undergoing a specific process

    Premium to crude oil

    100

    5 February 2023

    2710 19 15

    For undergoing chemical transformation by a process other than those specified in respect of subheading 2710 19 11

    Premium to crude oil

    100

    5 February 2023

     

    For other purposes

    Kerosene

     

    2710 19 21

    Jet fuel

    Premium to crude oil

    100

    5 February 2023

    2710 19 25

    Other

    Premium to crude oil

    100

    5 February 2023

    2710 19 29

    Other

    Premium to crude oil

    100

    5 February 2023

     

    Heavy oils

    Gas oils

     

    2710 19 31

    For undergoing a specific process

    Premium to crude oil

    100

    5 February 2023

    2710 19 35

    For undergoing chemical transformation by a process other than those specified in respect of subheading 2710 19 31

    Premium to crude oil

    100

    5 February 2023

     

    For other purposes

     

    2710 19 43

    With a sulphur content not exceeding 0,001  % by weight

    Premium to crude oil

    100

    5 February 2023

    2710 19 46

    With a sulphur content exceeding 0,001  % by weight but not exceeding 0,002  % by weight

    Premium to crude oil

    100

    5 February 2023

    2710 19 47

    With a sulphur content exceeding 0,002  % by weight but not exceeding 0,1  % by weight

    Premium to crude oil

    100

    5 February 2023

    2710 19 48

    With a sulphur content exceeding 0,1  % by weight

    Premium to crude oil

    100

    5 February 2023

     

    Fuel oils

     

    2710 19 51

    For undergoing a specific process

    Discount to crude oil

    45

    5 February 2023

    2710 19 55

    For undergoing chemical transformation by a process other than those specified in respect of subheading 2710 19 51

    Discount to crude oil

    45

    5 February 2023

     

    For other purposes

     

    2710 19 62

    With a sulphur content not exceeding 0,1  % by weight

    Discount to crude oil

    45

    5 February 2023

    2710 19 66

    With a sulphur content exceeding 0,1  % by weight but not exceeding 0,5  % by weight

    Discount to crude oil

    45

    5 February 2023

    2710 19 67

    With a sulphur content exceeding 0,5  % by weight

    Discount to crude oil

    45

    5 February 2023

     

    Lubricating oils; other oils

     

    2710 19 71

    For undergoing a specific process

    Premium to crude oil

    100

    5 February 2023

    2710 19 75

    For undergoing chemical transformation by a process other than those specified in respect of subheading 2710 19 71

    Discount to crude oil

    45

    5 February 2023

     

    For other purposes

     

    2710 19 81

    Motor oils, compressor lube oils, turbine lube oils

    Discount to crude oil

    45

    5 February 2023

    2710 19 83

    Hydraulic oils

    Discount to crude oil

    45

    5 February 2023

    2710 19 85

    White oils, liquid paraffin

    Discount to crude oil

    45

    5 February 2023

    2710 19 87

    Gear oils and reductor oils

    Discount to crude oil

    45

    5 February 2023

    2710 19 91

    Metal-working compounds, mould-release oils, anti-corrosion oils

    Discount to crude oil

    45

    5 February 2023

    2710 19 93

    Electrical insulating oils

    Discount to crude oil

    45

    5 February 2023

    2710 19 99

    Other lubricating oils and other oils

    Discount to crude oil

    45

    5 February 2023

    2710 20

    Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70  % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils

     

     

    Gas oils

    2710 20 11

    With a sulphur content not exceeding 0,001  % by weight

    Premium to crude oil

    100

    5 February 2023

    2710 20 16

    With a sulphur content exceeding 0,001  % by weight but not exceeding 0,1  % by weight

    Premium to crude oil

    100

    5 February 2023

    2710 20 19

    With a sulphur content exceeding 0,1  % by weight

    Premium to crude oil

    100

    5 February 2023

     

    Fuel oils

     

    2710 20 32

    With a sulphur content not exceeding 0,5  % by weight

    Discount to crude oil

    45

    5 February 2023

    2710 20 38

    With a sulphur content exceeding 0,5  % by weight

    Discount to crude oil

    45

    5 February 2023

    2710 20 90

    Other oils

    Discount to crude oil

    45

    5 February 2023

     

    Waste oils

     

    2710 91

    Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs)

    Discount to crude oil

    45

    5 February 2023

    2710 99

    Other

    Discount to crude oil

    45

    5 February 2023

    ▼M26




    ANNEX XXIX

    List of projects referred to in Article 3n(6)(c)



    Scope of exemption

    Date of application

    Date of expiration

    The transport by vessel to Japan, the technical assistance, brokering services, financing or financial assistance related to such transport, of crude oil falling under CN 2709 00 commingled with condensate, originating in the Sakhalin-2 (Сахалин-2) Project, located in Russia

    5 December 2022

    28 June 2024

    ▼M20




    ANNEX XXX

    List of goods referred to in Article 3a

    Aluminium, including bauxite
    Chromium
    Cobalt
    Copper
    Iron ore
    Mineral fertilisers, including potash and phosphate rock
    Molybdenum
    Nickel
    Palladium
    Rhodium
    Scandium
    Titanium
    Vanadium
    Heavy rare earths (dysprosium, erbium, europium, gadolinium, holmium, lutetium, terbium, thulium, ytterbium, yttrium).
    Light rare earths (cerium, lanthanum, neodymium, praseodymium and samarium)




    ANNEX XXXI

    List of petroleum products referred to in Article 3m paragraph 7 and 8



    CN Code

    Description

     

    Gas oils

    2710 19 31

    For undergoing a specific process

    2710 19 35

    For undergoing chemical transformation by a process other than those specified in respect of subheading 2710 19 31

     

    For other purposes

    2710 19 43

    With a sulphur content not exceeding 0,001 % by weight

    2710 19 46

    With a sulphur content exceeding 0,001 % by weight but not exceeding 0,002 % by weight

    2710 19 47

    With a sulphur content exceeding 0,002 % by weight but not exceeding 0,1 % by weight

    2710 19 48

    With a sulphur content exceeding 0,1 % by weight

    2710 20 11

    With a sulphur content not exceeding 0,001 % by weight

    2710 20 16

    With a sulphur content exceeding 0,001 % by weight but not exceeding 0,1 % by weight

    2710 20 19

    With a sulphur content exceeding 0,1 % by weight

     

    Light oils and preparations

    2710 12 11

    Light oils and preparations for undergoing a specific process

    2710 12 15

    Light oils and preparations for undergoing chemical transformation by a process other than those specified in respect of subheading 2710 12 11

     

    Light oils and preparations for other purposes than specified in subheadings 2710 12 11 and 2710 12 15

    2710 12 21

    Special spirit: white spirit

    2710 12 25

    Special spirits other than white spirit

    2710 12 31

    Aviation motor spirit

    2710 12 41

    Motor spirit other than for aviation, with a lead content not exceeding 0,013 g per litre, with an octane number (RON) of less than 95

    2710 12 45

    Motor spirit other than for aviation, with a lead content not exceeding 0,013 g per litre, with an octane number (RON) of 95 or more but less than 98

    2710 12 49

    Motor spirit other than for aviation, with a lead content not exceeding 0,013 g per litre, with an octane number (RON) of 98 or more

    2710 12 50

    Motor spirit other than for aviation, with a lead content exceeding 0,013 g per litre

    2710 12 70

    Spirit type jet fuel

    2710 12 90

    Other light oils

     

    Medium oils

    2710 19 21

    Kerosene for Jet fuel

    2710 19 25

    Other Kerosene

     

    Heavy oils

    2710 19 51

    Fuel oils for undergoing a specific process

    2710 19 55

    Fuel oils for undergoing chemical transformation by a process other than those specified in respect of subheading 2710 19 51

    2710 19 62

    Fuel oils for other purposes with a sulphur content not exceeding 0,1 % by weight

    2710 19 66

    Fuel oils for other purposes with a sulphur content exceeding 0,1 % by weight but not exceeding 0,5 % by weight

    2710 19 67

    Fuel oils for other purposes with a sulphur content exceeding 0,5 % by weight

     

    Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils

    2710 20 32

    Fuel oils with a sulphur content not exceeding 0,5 % by weight

    2710 20 38

    Fuel oils with a sulphur content exceeding 0,5 % by weight

    2710 20 90

    Other fuel oils




    ANNEX XXXII

    List of petroleum products referred to in Article 3m paragraph 7



    CN Code

    Description

    Export volume quotas in kt

     

    Light oils and preparations for other purposes than specified in subheadings 2710 12 11 and 2710 12 15

    2710 12 25

    Special spirits other than white spirit

    282,8

    2710 12 41

    Motor spirit other than for aviation, with a lead content not exceeding 0,013 g per litre, with an octane number (RON) of less than 95

    120,6

    2710 12 45

    Motor spirit other than for aviation, with a lead content not exceeding 0,013 g per litre, with an octane number (RON) of 95 or more but less than 98

    995,6

    2710 12 49

    Motor spirit other than for aviation, with a lead content not exceeding 0,013 g per litre, with an octane number (RON) of 98 or more

    3,4

     

    Heavy oils for other purposes than specified in subheadings 2710 19 51 and 2710 19 55

    2710 19 66

    Fuel oils with a sulphur content exceeding 0,1 % by weight but not exceeding 0,5 % by weight

    2,3

    2710 19 67

    Fuel oils with a sulphur content exceeding 0,5 % by weight

    12,0

    ▼M25




    ANNEX XXXIII

    List of goods and technology and countries as referred to in Article 12f



    CN Code

    Description

    Land




    ANNEX XXXV

    List of firearms and other arms referred to in Article 2aa



    CN Code

    Description

    9303

    Other firearms and similar devices which operate by the firing of an explosive charge

    ex  93 04

    Other arms (for example, spring, air or gas guns and pistols), excluding those of heading 9307

    ▼M28




    ANNEX XXXVI

    List of partner countries for importation of iron and steel as referred to in Article 3g(1)

    SWITZERLAND
    NORWAY
    UNITED KINGDOM

    ▼M26




    ANNEX XXXVII

    List of goods and technology as referred to in Article 3k(1a)



    CN code

    Description

    8409 99

    Parts suitable for use solely or principally with compression-ignition internal combustion piston engine (diesel or semi-diesel engine), n.e.s.

    8412 21

    Hydraulic power engines and motors, linear acting (cylinders)

    8413 50

    Reciprocating positive displacement pumps for liquids, power-driven, n.e.s.

    8421 23

    Oil or petrol-filters for internal combustion engines

    8421 31

    Intake air filters for internal combustion engines

    8428 39

    Continuous-action elevators and conveyors, for goods or materials (excluding those for underground use and bucket, belt or pneumatic types)

    8429 59

    Self-propelled mechanical shovels, excavators and shovel loaders (excluding machinery with a 360° revolving superstructure and front-end shovel loaders)

    8431 39

    Parts suitable for use solely or principally with the machinery of heading 8428 , (excluding parts of lifts, skip hoists or escalators), n.e.s.

    8471 30

    Portable automatic data-processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display

    8471 70

    Storage units for automatic data-processing machines

    8481 20

    Valves for oleohydraulic or pneumatic transmission

    8502 20

    Generating sets with spark-ignition internal combustion piston engines

    8507 10

    Lead-acid accumulators of a kind used for starting piston engines

    8705 10

    Crane lorries




    ANNEX XXXVIIIA

    List of goods and products as referred to in Article 3p

    Part A



     

    CN code

    Description

     

    7102 10

    Unsorted diamonds

     

    7102 31

    Non-industrial diamonds, unworked or simply sawn, cleaved or bruted

     

    7102 39

    Non-industrial diamonds, other than unworked or simply sawn, cleaved or bruted

    Part B



     

    7104 21

    Synthetic or reconstructed diamonds, unworked or simply sawn or roughly shaped

     

    7104 91

    Synthetic or reconstructed diamonds, other than unworked or simply sawn or roughly shaped

    Part C



    Ex

    7113

    Articles of jewellery and parts thereof, of precious metal or of metal clad with precious metal, incorporating diamonds

    Ex

    7114

    Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of precious metal or of metal clad with precious metal, incorporating diamonds

    Ex

    7115 90

    Other articles of precious metal or of metal clad with precious metal, incorporating diamonds, not elsewhere specified, excluding platinum catalysts in the form of wire cloth or grill

    Ex

    7116 20

    Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed), incorporating diamonds

    Ex

    9101

    Wristwatches, pocket-watches and other watches, including stopwatches, incorporating diamonds, with case of precious metal or of metal clad with precious metal




    ANNEX XXXVIIIB

    Authority for the verification of diamonds as referred to in paragraph 8 of Article 3p

    Federal Public Service Economy at the Diamond Office

    Hoveniersstraat 22

    B-2018 Antwerpen

    Belgien




    ANNEX XXXIX

    List of software as referred to in Article 5n(2b)

    Software for the management of enterprises, i.e. systems that digitally represent and steer all processes happening in an enterprise, including:

    — 
    enterprise resource planning (ERP),
    — 
    customer relationship management (CRM),
    — 
    business intelligence (BI),
    — 
    supply chain management (SCM),
    — 
    enterprise data warehouse (EDW),
    — 
    computerized maintenance management system (CMMS),
    — 
    project management software,
    — 
    product lifecycle management (PLM),
    — 
    typical components of the above-mentioned suites, including software for accounting, fleet management, logistics and human resources.

    Design and Manufacturing Software used in the areas of architecture, engineering, construction, manufacturing, media, education and entertainment, including:

    — 
    building information modelling (BIM),
    — 
    computer aided design (CAD),
    — 
    computer-aided manufacturing (CAM),
    — 
    engineer to order (ETO),
    — 
    typical components of above-mentioned suites.




    ANNEX XL

    List of goods and technology as referred to in Article 12g

    — 
    8542.31 Electronic integrated circuits: Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits
    — 
    8542.32 Electronic integrated circuits: Memories
    — 
    8542.33 Electronic integrated circuits: Amplifiers
    — 
    8542.39 Electronic integrated circuits: Other
    — 
    8517.62 Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus
    — 
    8526.91 Radio navigational aid apparatus
    — 
    8532.21 Other fixed capacitors: Tantalum capacitors
    — 
    8532.24 Other fixed capacitors: Ceramic dielectric, multilayer
    — 
    8548.00 Electrical parts of machinery or apparatus, not specified or included elsewhere in chapter 85
    — 
    8471.50 Processing units other than those of subheading 8471 41 or 8471 49 , whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units
    — 
    8504.40 Static converters
    — 
    8517.69 Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network
    — 
    8525.89 Other television cameras, digital cameras and video camera recorders
    — 
    8529.10 Aerials and aerial reflectors of all kinds; parts suitable for use therewith
    — 
    8529.90 Other parts suitable for use solely or principally with the apparatus of headings 8524 to 8528
    — 
    8536.69 Plugs and sockets for a voltage not exceeding 1 000 V
    — 
    8536.90 Electrical apparatus for switching electrical circuits, or for making connections to or in electricalcircuits, for a voltage not exceeding 1 000 V (excl. fuses, automatic circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets)
    — 
    8541.10 Diodes, other than photosensitive or light-emitting diodes (LED)
    — 
    8541.21 Transistors, other than photosensitive transistors with a dissipation rate of less than 1 W
    — 
    8541.29 Other transistors, other than photosensitive transistors
    — 
    8541.30 Thyristors, diacs and triacs (excl. photosensitive semiconductor devices)
    — 
    8541.49 Photosensitive semiconductor devices (excl. Photovoltaic generators and cells)
    — 
    8541.51 Other semiconductor devices: Semiconductor-based transducers
    — 
    8541.59 Other semiconductor devices
    — 
    8541.60 Mounted piezo-electric crystals
    — 
    8482.10 Ball bearings
    — 
    8482.20 Tapered roller bearings, including cone and tapered roller assemblies
    — 
    8482.30 Spherical roller bearings
    — 
    8482.50 Other cylindrical roller bearings, including cage and roller assemblies
    — 
    8807.30 Other parts of aeroplanes, helicopters or unmanned aircraft
    — 
    9013.10 Telescopic sights for fitting to arms; periscopes; telescopes designed to form parts of machines, appliances, instruments or apparatus of this chapter or Section XVI
    — 
    9013.80 Other optical devices, appliances and instruments
    — 
    9014.20 Instruments and appliances for aeronautical or space navigation (other than compasses)
    — 
    9014.80 other navigational instruments and appliances
    — 
    8471.80 Units for automatic data-processing machines (excl. processing units, input or output units and storage units)
    — 
    8486.10 Machines and apparatus for the manufacture of boules or wafers
    — 
    8486.20 Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits
    — 
    8486.40 Machines and apparatus specified in note 11(C) to this chapter
    — 
    8534.00 Printed circuits
    — 
    8543.20 Signal generators
    — 
    9027.50 Other instruments and apparatus using optical radiations (ultraviolet, visible, infrared)
    — 
    9030.20 Oscilloscopes and oscillographs
    — 
    9030.32 Multimeters with recording device
    — 
    9030.39 Instruments and apparatus for measuring or checking voltage, current, resistance or electrical power, with recording device
    — 
    9030.82 Instruments and apparatus for measuring or checking semiconductor wafers or devices



    ( 1 ) Regulation (EU) 2021/821 of the European Parliament and of the Council of 20 May 2021 setting up a Union regime for the control of exports, brokering, technical assistance, transit and transfer of dual-use items (recast) (OJ L 206, 11.6.2021, p. 1).

    ( 2 ) Regulation (EU) No 909/2014 of the European Parliament and of the Council of 23 July 2014 on improving securities settlement in the European Union and on central securities depositories and amending Directives 98/26/EC and 2014/65/EU and Regulation (EU) No 236/2012 (OJ L 257, 28.8.2014, p. 1).

    ( 3 ) Directive 2014/65/EU of the European Parliament and of the Council of 15 May 2014 on markets in financial instruments and amending Directive 2002/92/EC and Directive 2011/61/EU (OJ L 173, 12.6.2014, p. 349).

    ( 4 ) Directive 2014/23/EU of the European Parliament and of the Council of 26 February 2014 on the award of concession contracts (OJ L 94, 28.3.2014, p. 1).

    ( 5 ) Directive 2014/24/EU of the European Parliament and of the Council of 26 February 2014 on public procurement and repealing Directive 2004/18/EC (OJ L 94, 28.3.2014, p. 65).

    ( 6 ) Directive 2014/25/EU of the European Parliament and of the Council of 26 February 2014 on procurement by entities operating in the water, energy, transport and postal services sectors and repealing Directive 2004/17/EC (OJ L 94, 28.3.2014, p. 243).

    ( 7 ) Directive 2009/81/EC of the European Parliament and of the Council of 13 July 2009 on the coordination of procedures for the award of certain works contracts, supply contracts and service contracts by contracting authorities or entities in the fields of defence and security, and amending Directives 2004/17/EC and 2004/18/EC (OJ L 216, 20.8.2009, p. 76).

    ( 8 ) Directive (EU) 2022/2557 of the European Parliament and of the Council of 14 December 2022 on the resilience of critical entities and repealing Council Directive 2008/114/EC (OJ L 333, 27.12.2022, p. 164).

    ( 9 ) Council Directive 2008/114/EC of 8 December 2008 on the identification and designation of European critical infrastructures and the assessment of the need to improve their protection (OJ L 345, 23.12.2008, p. 75).

    ( 10 ) Regulation (EU) No 258/2012 of the European Parliament and of the Council of 14 March 2012 implementing Article 10 of the United Nations’ Protocol against the illicit manufacturing of and trafficking in firearms, their Parts and components and ammunition, supplementing the United Nations Convention against Transnational Organised Crime (UN Firearms Protocol), and establishing export authorisation, and import and transit measures for firearms, their parts and components and ammunition (OJ L 94, 30.3.2012, p. 1).

    ( 11 ) Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC (OJ L 354, 28.12.2013, p. 90)

    ( 12 ) Directive 2002/59/EC of the European Parliament and of the Council of 27 June 2002 establishing a Community vessel traffic monitoring and information system and repealing Council Directive 93/75/EEC (OJ L 208, 5.8.2002, p. 10).

    ( 13 ) Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).

    ( 14 ) Council Regulation (EC) No 2368/2002 of 20 December 2002 implementing the Kimberley Process certification scheme for the international trade in rough diamonds (OJ L 358, 31.12.2002, p. 28).

    ( 15 ) Latest version published in OJ C 85, 13.3.2020, p. 147.

    ( 16 ) Regulation (EU) No 575/2013 of the European Parliament and of the Council of 26 June 2013 on prudential requirements for credit institutions and investment firms and amending Regulation (EU) No 648/2012 (OJ L 176, 27.6.2013, p. 1).

    ( 17 ) Directive 2009/138/EC of the European Parliament and of the Council of 25 November 2009 on the taking-up and pursuit of the business of Insurance and Reinsurance (Solvency II) (OJ L 335, 17.12.2009, p. 1).

    ( 18 ) Regulation (EU) No 648/2012 of the European Parliament and of the Council of 4 July 2012 on OTC derivatives, central counterparties and trade repositories (OJ L 201, 27.7.2012, p. 1).

    ( 19 ) Council Regulation (EU) No 269/2014 of 17 March 2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of Ukraine (OJ L 78, 17.3.2014, p. 6).

    ( 20 ) Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119, 4.5.2016, p. 1).

    ( 21 ) Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).

    ( 22 ) Regulation (EC) No 391/2009 of the European Parliament and of the Council of 23 April 2009 on common rules and standards for ship inspection and survey organisations (OJ L 131 28.5.2009, p. 11).

    ( 23 ) Directive (EU) 2016/1629 of the European Parliament and of the Council of 14 September 2016 laying down technical requirements for inland waterway vessels, amending Directive 2009/100/EC and repealing Directive 2006/87/EC (OJ L 252, 16.9.2016, p. 118).

    ( 24 ) Regulation (EU, Euratom) 2018/1046 of the European Parliament and of the Council of 18 July 2018 on the financial rules applicable to the general budget of the Union, amending Regulations (EU) No 1296/2013, (EU) No 1301/2013, (EU) No 1303/2013, (EU) No 1304/2013, (EU) No 1309/2013, (EU) No 1316/2013, (EU) No 223/2014, (EU) No 283/2014, and Decision No 541/2014/EU and repealing Regulation (EU, Euratom) No 966/2012 (OJ L 193, 30.7.2018, p. 1).

    ( 25 ) Regulation (EC) No 715/2009 of the European Parliament and of the Council of 13 July 2009 on conditions for access to the natural gas transmission networks and repealing Regulation (EC) No 1775/2005 (OJ L 211, 14.8.2009, p. 36).

    ( 26 ) Directive 2009/73/EC of the European Parliament and of the Council of 13 July 2009 concerning common rules for the internal market in natural gas and repealing Directive 2003/55/EC (OJ L 211, 14.8.2009, p. 94).

    ( 27 ) Council Regulation (EU) No 692/2014 of 23 June 2014 concerning restrictive measures in response to the illegal annexation of Crimea and Sevastopol (OJ L 183, 24.6.2014, p. 9).

    ( 28 ) Council Regulation (EU) 2022/263 of 23 February 2022 concerning restrictive measures in response to the illegal recognition, occupation or annexation by the Russian Federation of certain non-government controlled areas of Ukraine (OJ L 42 I, 23.2.2022, p. 77).

    ( 29 ) Council Decision 2014/145/CFSP of 17 March 2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of Ukraine (OJ L 78, 17.3.2014, p. 16).

    ( 30 ) Council Decision 2014/386/CFSP of 23 June 2014 concerning restrictive measures in response to the illegal annexation of Crimea and Sevastopol (OJ L 183, 24.6.2014, p. 70).

    ( 31 ) Council Decision (CFSP) 2022/266 of 23 February 2022 concerning restrictive measures in response to the illegal recognition, occupation or annexation by the Russian Federation of certain non-government controlled areas of Ukraine (OJ L 42 I, 23.2.2022, p. 109).

    ( 32 ) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

    ( 33 ) Directive (EU) 2015/849 of the European Parliament and of the Council of 20 May 2015 on the prevention of the use of the financial system for the purposes of money laundering or terrorist financing, amending Regulation (EU) No 648/2012 of the European Parliament and of the Council, and repealing Directive 2005/60/EC of the European Parliament and of the Council and Commission Directive 2006/70/EC (OJ L 141, 5.6.2015, p. 73).

    ( 34 ) Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119, 4.5.2016, p. 1).

    ( 35 ) Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).

    ( 36 ) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

    ( 37 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 38 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 39 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 40 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 41 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 42 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 43 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 44 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 45 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 46 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 47 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 48 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 49 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 50 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 51 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 52 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 53 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 54 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 55 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 56 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 57 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 58 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 59 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 60 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 61 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 62 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 63 ) Ref. Annex I to Regulation (EU) 2021/821

    ( 64 ) Ref. Annex I to Regulation (EU) 2021/821

    Top