Professional Documents
Culture Documents
Altair Operators Handbook1 PDF
Altair Operators Handbook1 PDF
ALTAIR
OPERATORS HANDBOOK
All of the information in this handbook is to be used only as a reference guide to help you understand the methods and concepts required to accomplish successful operation of your Altair Avionics monitoring system. You must use your current ICA for all troubleshooting Any deviation from the procedures described within your Instructions for Continued Airworthiness document could result in a failure of the product to perform properly and could possibly result in damage to other systems of the aircraft.
Flight Data collected by processor and stored as log data Log Data is retrieved and uploaded into TurbineTracker using MLP or the DTU
Raw data NOTE: MLP can only view logs in raw format
Checklist Index
TurbineTracker Related CUST-T-401-1 Create Config from Existing Config CUST-T-402-1 Create Config from System Template CUST-T-403-1 Download Config File from TTS CUST-T-404-1 Engine Administration Checklist CUST-T-405-1 Upload Config (.cal) File to TTS CUST-T-406-1 Upload Log File to TTS CUST-T-407-1 Verify Uploaded Logs MLP Related CUST-T-408-1 CUST-T-409-1 CUST-T-410-1 CUST-T-411-1 CUST-T-412-1 CUST-T-413-1 CUST-T-414-1 CUST-T-415-1 CUST-T-416-1 CUST-T-417-1 CUST-T-418-1 CUST-T-419-1 System Related CUST-T-420-1 CUST-T-421-1 Date 21 NOV 05 31 OCT 05 06 NOV 05 31 OCT 05 31 OCT 05 21 NOV 05 23 JUL 06 Page 3 5 7 8 14 15 17 24 32 44 45 47 49 51 59 60 61 64 67 70 74 78
USB Download Cable Driver Installation 24 MAR 06 Calibration 31 OCT 05 Establish MLP Connection 21 NOV 05 Load Configuration File 06 NOV 05 Retrieve Log Data 01 NOV 05 Synchronize Checklist 23 JAN 06 MLP Troubleshooting 14 SEP 06 DTU Configuration Load Checklist 23 JAN 06 View Live Data 06 NOV 05 Download MLP Checklist 31 AUG 06 View MLP Session Log Checklist 31 AUG 06 Expert Mode Config File Generation 31 AUG 06 System Validation Checklist Replace DTU 05 JUL 06 17 OCT 06
CUSTT-401-1 Create Configuration File from an Existing Configuration 21 NOV 2005 Page 1 of 2
CUST-T-401-1 Create Configuration File from an Existing Configuration Page 2 of 2 12. (Optional) Enter the desired information in the Tag Value field. 13. Select Keep These Values button at the bottom of the screen. 14. Select the Save This Configuration hyper text. Note: Your configuration file has been created, but you should click on the Configuration tab on the top of the web page then select the List Configs button from the left hand side of the screen to verify that the file is listed in your active configuration list. * Be sure that the processor type, aircraft type and the serial number range, where appropriate, all match. ** Always select the Keep These Values while modifying the configuration until all the changes have been made. Only after you have finished modifying all the parameters of the file should you select Save This Configuration, by doing this you increase the version of the config by one. Every time you select Save This Configuration it will increase the version by one.
CUST-T-402-1 Create Configuration File from a System Template 31 OCTOBER 2005 Page 1 of 2
CUST-T-402-1 Create Configuration File from a System Template Page 2 of 2 12. (Optional) Enter the processor serial number in the Tag Value field. 13. Select Keep These Values button at the bottom of the screen. 14. Select the Save This Configuration hyper text. Note: Your configuration file has been created, but you should click on the Configuration tab on the top of the web page then select the List Configs button from the left hand side of the screen to verify that the file is listed in your active configuration list. * Be sure that the processor type, aircraft type and the serial number range , where appropriate, all match. ** Always select the Keep These Values while modifying the configuration until all the changes have been made. Only after you have finished modifying all the parameters of the file should you select Save This Configuration, by doing this you increase the version of the config by one. Every time you select Save This Configuration it will increase the version by one.
ENGINE ADMINISTRATION
Action
Creating an Engine Cycle Tags -Add New Engine Tag(s) Copy Engine Tag(s) Engine Installation Engine Removal Engine Deletion from Pool
Page
1 2 3 4 5 6
TIPS AND TRICKS: All of the functions of engine administration are embedded TurbineTracker routines. Changes, additions or deletions will not modify the monitor configuration file version.
Creating an Engine