Professional Documents
Culture Documents
Grader Specifications
Grader Specifications
Specifications
F 156 A
Hydrodynamic drive
No-spin differential for high thrust
forces
Direct-controlled load-sensing
hydraulics
Automatic levelling (optional)
EDC Electronic Drive Control
Encapsulated precision-roller
slewing ring
ROPS/FOPS deluxe cab
Precise grading. Powerful traction. Efficient
CE symbol according to EC
Machinery Directive.
TV certificate for compliance
with DIN ISO EN 9001.
Hydraulically adjustable
slewing yoke for
mouldboard radius over 90
2
operation: The F 156 from O&K.
Maintenance-friendly design,
easy to service
3
A workplace that boosts productivity
For working standing or seated the operator can lock the neatly laid out control console
in one of four positions for easy access to the controls at all times. The operator adopts
the most comfortable, least tiring position.
4
All-wheel drive with EDC Electronic Drive Control
5
Nivomatic 6 for ultrasonic and laser operation
readied for 3-D control
System components are all digitized. The console is compact and allows full work area
visibility. It is easy to operate yet facilitates maximum precision. Nivomatic 6 applies two
different techniques for automatic height and transverse slope adjustment.
Ultrasound: The 5-fold ultrasonic system uses sonic-skiing to scan the ground sur face,
wire or pavement edge to of fset any irregularities at the edge and achieve the highest
level of precision. A sixth sensor has a temperature compensation function.
Laser: Height-regulating laser beam using a propor tional sensor that evaluates each
individual cell for propor tional and hence
high-precision control.
The roller-mounted slewing ring, with internal gearing, sealed and backlash free, develops
ver y low friction while generating extraordinar y torque for fluid, smooth mouldboard
functions. The mouldboard has a slewing radius of over 90, fine-tuned through
sophisticated geometry and a hydraulically
adjustable slewing yoke. Stepless cutting
angle adjustment is also hydraulic. A wide
variety of ground conditions and tasks are
easily handled.
6
Dimensions and weights
8498
3341
148 335
2550
1532 5983 2433
9948
Ser vice weight includes all lubricants, a full tank, standard tyres, and operator
9
Engine Rear axle, tandem drive
Deutz 4-stroke diesel engine BF 6 L 913 O&K grader axle drive with automatic no-spin differential Oscil-
Air-cooled Direct injection with turbocharger lating tandem with power transfer through heavy-duty roller chains
Planetary gear reduction at the wheel hubs
Engine output ISO 9249 112 kW / 2300 RPM
Torque at 1,650 RPM 490 Nm Ar ticulation +/- 15
Cylinders / displacement 6 / 6128 cm3 Dimensions tandem box:
Bore / stroke 102 mm / 125 mm Height 512 mm
Voltage 24 V Width 184 mm
2 batteries 12 V / 88 Ah each Wall thickness 22 mm
Alternator 980 W / 35 A Chain pitch 38 mm
Starter 4.8 kW Tandem wheelbase 1544 mm
Exhaust emission values according to COM 1 and TIER 1
Torque converter
Transmission Steering
Full powershift transmission, 6 forward and 3 reverse speeds, Operated from the adjustable steering and control console Front
shifting-on-the-go Electric single-lever shifting, with reverse lock wheel spindle steering, all-hydraulic, volume control.
in gears 3 to 6
Steering wheel lock, left/right 45
Speeds in km/h Crowding forces (kN) Ar tic frame, hydraulically actuated with 2 double-flow steering cy-
Speeds For ward Reverse linders
F 156 F 156 A F 156 F 156 A F 156 F 156 A
Ar tic. angle+/- 28
Minimum turning radius:
1 Gear 4.6 4.7 4.6 4.7 84 112 across tyres 7300 mm
2 Gear 7.1 7.2 11.6 11.7 84 112 across front blade 8200 mm
3 Gear 11.6 11.7 26.1 25.7 52 92
4 Gear 18.0 18.0 33 57
5 Gear 26.1 25.7 22 38
6 Gear 38.5 37.0 14 18
Tyres
77
Cab Mouldboard settings
Elastically mounted, noise-insulated ROPS/FOPS cab with two Shifting to the right 755 mm
sliding doors locking into place Either-side access, two rear to the left 645 mm
sliding tinted side windows Rear-frame mounted cab Heater/ Reach across tyres w/o ar tic. steering:
defroster nozzles Ventilation options: recirculation/outside air, right, horizontal 2350 mm
filter unit left, horizontal 1850 mm
ROPS according to EEC sample testing and DIN/ISO 3471 Reach across tyres with artic. steering:
FOPS to DIN/ISO 3449 right, horizontal 3180 mm
left, horizontal 2610 mm
Max. slope angle:
right 100
left 112
Capacities Max. lifting height above ground 480 mm
Max. scraping depth 500 mm
Engine 19 l Cutting angle adjustment, hydr. 50
Transmission/torque converter 18 l
Axle drive 14 l
Tandem, ar ticulating mount 2 x 26 l + 2 x 8 l 68 l
Wheel hub gears 5.5 l 22 l Frame
Hydraulic tank 93 l
Hydraulic oil, total 170 l
Fuel tank 250 l Front frame: stiff, welded section from high-strength fine-grain
steel
Slewing ring
8
Accessibility for fast maintenance
Alterations without prior notice. The illustrations do not necessarily show the standard version of the machine. Any statement on
E 578.1e/1-1000 the quality or use of the products shall be deemed approximate and without obligation and not construed to be an express warranty
Printed in Germany of quality or merchantability. Performance shall expressly be governed by the contractual agreement.