Professional Documents
Culture Documents
Set Valve Clearance
Set Valve Clearance
08
ENGINES 541.9
ENGINES 542.9
N05.30-2095-09
Modification notes
1 Remove cylinder head covers (3) Model 930, 932, 933, 934 AR01.20-W-5014G
Model 950, 952, 953, 954 AR01.20-W-5014B
2 Remove cover for rapid exhaust valve Clean cover for rapid exhaust valve and AR01.50-W-0190-01A
area around quick-release valve.
*BA01.50-N-1004-01A
3 Select method for adjusting valve clearance Adjusting as per injection sequence
= Method 1.
Adjusting in two crankshaft positions
= method 2.
General information on adjusting valve Method 1 AH05.30-N-1000-01A
clearance
General information on adjusting valve Method 2 AH05.30-N-1000-01B
clearance
4.1 Remove end cover and cranking device (5) Only when cranking the engine with the
install at inspection hole in timing case and cranking device (5).
move engine into the crankshaft position of
the adjusting method selected For vehicles with code (N55)
Transmission oil cooling, detach transmission
cooler line and place to one side.
*BA01.60-N-1001-01B
*904589046300
Danger! Risk of accident caused by vehicle starting Secure vehicle to prevent it from moving by AS00.00-Z-0005-01A
off by itself when engine is running. Risk of itself.
injury caused by contusions and burns Wear closed and snug-fitting work clothes.
during starting procedure or when working Do not touch hot or rotating parts.
near the engine as it is running
Exhaust mm 0.60
Cylinder head
Constant throttle
Timing case