Scribd Logo
Hochladen

Welcome to Scribd!

  • Send It To: Sanaka Educational Trust'S Group of Institution

    Uploaded by

    Ayan Ghosh
    45 views2 pages
    This document contains assignments from four civil engineering subjects - Solid Mechanics, Fluid Mechanics, Surveying & Geomatics, and Concrete Technology. Students are asked to answer multiple choice questions related to concepts in each subject. They are to scan their written answers for each subject separately and email them by midnight, making sure to include their name and subject code on each answer script.

    Original Description:

    Original Title

    4th sem

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document contains assignments from four civil engineering subjects - Solid Mechanics, Fluid Mechanics, Surveying & Geomatics, and Concrete Technology. Students are asked to answer multiple choice questions related to concepts in each subject. They are to scan their written answers for each subject separately and email them by midnight, making sure to include their name and subject code on each answer script.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    45 views2 pages

    Send It To: Sanaka Educational Trust'S Group of Institution

    Uploaded by

    Ayan Ghosh
    This document contains assignments from four civil engineering subjects - Solid Mechanics, Fluid Mechanics, Surveying & Geomatics, and Concrete Technology. Students are asked to answer multiple choice questions related to concepts in each subject. They are to scan their written answers for each subject separately and email them by midnight, making sure to include their name and subject code on each answer script.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    Sanaka educational truSt’S group of inStitution

    Department of Civil Engineering


    Assignment Based Evaluation

    Subject Code: CE ES 402


    Subject: SOLID MECHANICS
    Send it to [email protected]

    Answer the following:


    1. A simply supported beam of span 8m has a cross section area 250 x 300 mm. If
    the permissible stress is 15 N/mm2, find
    a) Maximum UDL it can carry
    b) Maximum concentrated load P, applied at the centre of the beam, the beam
    can carry safely.
    2. Deduce the Bending stress equation
    M/I = f/y = E/R
    3. Derive the expression for slope and deflection of a cantilever beam with a point
    load at its centre.
    4. Draw the Bending moment and Shear force diagram for the beam shown in the
    figure:

    Subject Code: CE ES 401


    Subject: FLUID MECHANICS
    Send it to [email protected]
    Answer the following:

    1. State and derive Bernoulli’s Equation of motion along with the assumptions
    considered in it.

    2. Two velocity components are given in the following cases, considering the fluid to be
    in-compressible find the third component such that they satisfy the continuity
    equation:
    a) U = x3 + y2 + 2z2 ; V = --x2y – yz – xy ; W = ?
    b) U = log ( y2 + z2 ) ; V = log ( x2 + z2) ; W = ?
    3. Determine the total pressure on a circular plate of diameter 1.5m which is placed
    vertically in water in such a way that the center of the plate is 3m below the free
    surface of water. Find the position of center of pressure also?

    4. A 30 cm diameter pipe, conveying water branches into two pipes of diameter 20cm
    and 15 cm respectively. If the average velocity in the 30 cm diameter pipe is 2.5 m/s,
    find the discharge in this pipe. Also determine the velocity in 15 cm pipe if the
    average velocity in 20 cm diameter pipe is 2 m/s.

    Subject Code: CE (PC) 403


    Subject: SURVEYING & GEOMATICS
    Send it to [email protected]

    1. What are the sources of error in chaining? What precautions would you take to guard
    against them?
    2. A baseline was measured to be 150m long with a tape at a field temperature of 27°C,
    the applied pull being 14 kg. The tape was standardized at a temperature of 15°C with
    a pull of 8 kg. if the designated length of the tape is 20m, weight of 1 cm3 of tape =
    7.86 g, total weight of tape 0.8 kg, E = 2.109×106 kg/cm2 and coefficient of expansion
    of tape per degree Celsius 11.2×10-6, find the true length of the line.
    3. Explain the principle of equalizing backsight and foresight distance.
    4. The following readings are successively taken with a level: 0.355, 0.485, 0.625,
    1.755, 1.895, 2.350, 1.780, 0.345, 0.685, 1.230 and 2.150. the instrument was shifted
    after the fourth and seventh readings. Prepare a level book and calculate the RLs of
    different points. The RL of the first point is 255.500m.

    Subject Code: CE (PC) 404


    Subject: CONCRETE TECHNOLOGY
    Send it to [email protected]

    1. Describe the stress-strain characteristics of concrete up to failure. Is there any


    difference between the stress-strain characteristics of aggregate and cement paste?

    2. What is effective water cement ratio?

    3. What is meant by autoclaving concrete?

    4. What is the effect of the rate of loading on strength of concrete?

    Note: Answer all of the above mentioned questions, after completion of the assignment, scan
    your answer script in separate files for each subject and send it through email within midnight
    12:00AM.
    Mention your name and subject code properly in the answer script.

    You might also like