Scribd Logo
Hochladen

Welcome to Scribd!

  • Chapter 14 Questions With Answers - Mod 7 Quiz

    Uploaded by

    Michelle Kollar
    1K views3 pages
    The document provides a set of true/false and multiple choice questions about plotting and printing in AutoCAD. Some key points covered are: 1. The Page Setup dialog box is similar to the Plot dialog box but with fewer options for controlling the print/plot area. 2. Plotting or printing to extents will include all drawing objects without regard for limits. 3. Named views can be printed or plotted from the Plot dialog box. 4. Additional print/plot devices need to be configured using the Add-a-Plotter Wizard before being available in the Page Setup or Plot dialog boxes.

    Original Description:

    Original Title

    Chapter 14 Questions with answers - Mod 7 Quiz - Copy

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides a set of true/false and multiple choice questions about plotting and printing in AutoCAD. Some key points covered are: 1. The Page Setup dialog box is similar to the Plot dialog box but with fewer options for controlling the print/plot area. 2. Plotting or printing to extents will include all drawing objects without regard for limits. 3. Named views can be printed or plotted from the Plot dialog box. 4. Additional print/plot devices need to be configured using the Add-a-Plotter Wizard before being available in the Page Setup or Plot dialog boxes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    1K views3 pages

    Chapter 14 Questions With Answers - Mod 7 Quiz

    Uploaded by

    Michelle Kollar
    The document provides a set of true/false and multiple choice questions about plotting and printing in AutoCAD. Some key points covered are: 1. The Page Setup dialog box is similar to the Plot dialog box but with fewer options for controlling the print/plot area. 2. Plotting or printing to extents will include all drawing objects without regard for limits. 3. Named views can be printed or plotted from the Plot dialog box. 4. Additional print/plot devices need to be configured using the Add-a-Plotter Wizard before being available in the Page Setup or Plot dialog boxes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    AutoCAD 2022 Instructor Chapter 14 Questions

    True (T) or False (F)

    1. ___ The Page Setup dialog box is similar to and has the same functions as the Plot
    dialog box with a few important exceptions.

    2. ___ Plotting or printing Extents is similar to Zoom Extents in that it plots the entire
    drawing (all objects) without regard to Limits.

    3. ___ You can print or plot a named View from the Plot dialog box.
    .
    4. ___ You can select which layers you wish to plot in the Plot Area section of the Plot
    dialog box.

    5. ___ You can configure only one printer and one plotter to use with AutoCAD.

    6. ___ Based on the Limits, a drawing is always automatically plotted or printed to a


    standard scale by selecting Scale to Fit in the Plot dialog box.

    7. ___ If you use the Viewplotdetails command, AutoCAD gives a report indicating if
    the last plot, print, or publishing job was successful.

    8. ___ You can Zoom and Pan while viewing a plot Preview.

    9. ___ A CAD drawing is not scaled until it is printed or plotted on a sheet of paper.

    10. ___ An engineering “B” size sheet is 11" x 17".

    Multiple Choice (circle the correct letter)

    1. To invoke the Plot dialog box by typing, enter any of the following except ____.
    a. Plot
    b. Print
    c. P
    d. Ctrl+P
    2. The Page Setup or Plot dialog box can be used to ____.
    a. select a configured plotter or printer device
    b. specify the paper size and orientation
    c. select the plot area (Limits, Display, Extents, etc.)
    d. all of the above

    3. If you want to set print or plot parameters such as plot device, paper size, plot scale, or
    plot area, and save the settings without plotting, use the ____.
    a. Plot dialog box
    b. Page Setup Manager or Page Setup dialog box
    c. Preview command
    d. Plot command, and then Save command

    4. If you want to print or plot from the Model tab and display all of the objects as large as
    possible on the sheet, select ____ in the Plot dialog box.
    a. Display and Scale to Fit
    b. Fit to Paper
    c. Limits and select a scale of 1:1
    d. Display and select a scale of 1:1

    5. Any new printing and plotting devices (not automatically configured by Windows) that
    can be made available to use while in AutoCAD from the Page Setup or Plot dialog box
    must first be configured through the ____.
    a. Plot command
    b. Print command
    c. Add-a-Plotter Wizard
    d. Printer Configuration Wizard

    6. When you press the Apply to Layout button in the Plot dialog box, ____.
    a. the drawing is printed or plotted
    b. the plot/print settings are saved with the layout
    c. a named page setup is saved
    d. all of the above

    7. The Page Setup dialog box is used primarily to ____.


    a. print or plot a layout
    b. create, modify, and apply page setups to layouts
    c. configure a new print/plot device for the named page setup
    d. all of the above

    8. To set up a drawing in millimeters for plotting at 1=1 (where the Limits = sheet size), the
    Drawing Scale Factor (DSF) equals ____.
    a. 25.4
    b. 1
    c. the sheet size
    d. 1/25.4

    9. The Tables of Limits Settings in the text can help you determine all of the following
    except ____.
    a. approximate drawing Limits
    b. print or plot paper size
    c. drawing Extents
    d. print or plot scale

    10. The separate window that allows you to control configuration parameters for different
    devices and to configure new devices is called ____.
    a. Configuration Controller
    b. Device Wizard
    c. Plotter Manager
    d. Output Manager

    You might also like