Samsung Ta550 Manual de Usuario
Samsung Ta550 Manual de Usuario
TA550
user manual
Digital TV notice
1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local
dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6. For more information, please contact your local Samsung customer care centre.
✎✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV
performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or
not.
10 cm 10 cm
10 cm 10 cm 10 cm 10 cm
10 cm
English 2
Contents
Getting Started 4 Safety Precautions
4
11 Accessories
12 Installing the Stand
13 Viewing the Control Panel
14 Viewing the Remote Control
15
15 Plug & Play (Initial Setup)
16 Connecting to an AV Device
18 Connecting to a COMMON INTERFACE slot
19 Connecting to an Audio Device
20 Connecting to a PC
21 Changing the Input Source
21
22 Using the INFO button (Now & Next guide)
22 Using the Channel Menu
24 Channel Menu
25 Picture Menu
29 Sound Menu
30 System Menu
34 Support Menu
36
41 Anynet+ (HDMI-CEC)
ENGLISH
Other Information 45 Installing the Device Driver
45
46 Analogue Channel Teletext Feature
47 Attaching a Wall Mount/Desktop Stand
48 Assembling the Cables
48 Anti-theft Kensington Lock
49 Troubleshooting
53 Specifications
54 Index
t
TOOLS This function can be used by Note Step by Step Guide
pressing the TOOLS button on the
remote control.
English 3
Getting Started
Safety Precautions
Failing to follow the precautions marked with this sign may result in a serious injury or
WARNING even a fatality.
Failing to follow the precautions marked with this sign may result in a personal injury or
CAUTION property damage.
Do not perform.
Must be followed.
¦¦ Power Related
✎✎ The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power Avoid connecting multiple electric
cord or plug or a loose power appliances to a single wall outlet.
outlet. yy Otherwise, it may result in fire
yy Otherwise, it may result in due to overheating of the wall
electric shock or fire. outlet.
Make sure to connect the power Avoid bending or twisting the power
cord to a grounded wall outlet (for cord excessively and avoid placing
insulation class 1 equipment only). heavy objects on the cord.
yy Otherwise, it may result in yy Otherwise, it may result in
electric shock or injury. electric shock or fire due to a
! damaged power cord.
English 4
Getting Started
Keep the power cord and the If the pins of the power plug or the
product away from a heater. wall outlet are covered in dust, clean
yy Otherwise, it may result in it using a dry cloth.
electric shock or fire. yy Otherwise, it may result in fire.
Caution
Avoid unplugging the power plug Make sure to use only the power
while the product is operating. cord supplied by our company. In
yy Otherwise, it may damage the addition, do not use the power cord
product due to electric shock. of another electric appliance.
yy Otherwise, it may result in
! electric shock or fire.
When unplugging the power plug Connect the power plug to a wall
from the wall outlet, make sure to outlet that can be easily reached.
hold it by the plug and not by the yy When a problem occurs
cord. with the product, you must
yy Otherwise, it may result in unplug the power plug to cut
! electric shock or fire. ! the power off completely.
You cannot cut the power
off completely using only the
power button on the product.
¦¦ Installation Related
Warning
Avoid placing burning candles, Ask an installation engineer or
mosquitorepellentor cigarettes on relevant company to install the
the product. product onto the wall.
yy Otherwise, it may result in fire. yy Otherwise, it may result in
injury.
!
yy Make sure to use the specified
wall mount.
Avoid installing the product in a Keep the plastic bags used to pack
badly-ventilated location such as the product away from children.
inside a bookshelf or closet. yy If children place the plastic
yy Otherwise, it may result in fire bags over their heads, they may
due to internal over-heating. suffocate.
!
English 5
Getting Started
Avoid installing the product in a Avoid installing the product where
location exposed to direct sunlight children may reach it.
and installing the product near a yy If a child touches the product,
heat source such as a fireplace or the product may fall and this
heater. may result in injury.
yy This may shorten the product yy Since the front part is heavier,
life cycle or cause fire. install the product on a flat and
stable surface.
Bend the outdoor antenna cable Install the antenna far away from
downwards at the location where any high voltage cables.
it comes in the house so that yy If the antenna touches or falls
rainwater does not flow in. onto a high voltage cable, it
yy If rainwater enters the product, may result in electric shock or
! it may result in electric shock ! fire.
or fire.
Caution
Do not let the product drop while Do not place the product face down
moving it. on the floor.
yy This may result in a problem yy This may damage the panel of
with the product or injury. the product.
English 6
Getting Started
¦¦ Cleaning Related
Warning
Before cleaning the product, When cleaning the product, do
unplug the power cord. not spray water directly over the
yy Otherwise, it may result in product parts.
electric shock or fire. yy Make sure that water does not
enter the product.
!
yy Otherwise, it may result in fire,
electric shock or a problem with
the product.
Caution
Avoid spraying cleansing agent When cleaning the product,
directly onto the product. disconnect the power cord and
yy This may result in discoloration clean the product with the supplied
or cracking of the exterior cleaning cloth.
of the product or the panel yy Avoid using chemicals such as
coming off. ! wax, benzene, alcohol, thinner,
mosquitorepellent, fragrance,
lubrication or cleansing agent
when cleaning the product.
This may result in the exterior
being deformed or the print
being removed.
If you can't get the product clean Since the exterior of the product is
with just the supplied cloth, use a easily scratched, be sure to use the
soft, damp cloth with a "monitor- supplied cleansing cloth.
exclusive cleansing agent" and
wipe the product with it.
! yy If no monitor-exclusive !
cleansing agent is available,
dilute a cleansing agent with
water at a ratio of 1:10 before
cleaning the product.
¦¦ Usage Related
Warning
Since a high voltage runs through To move the product, turn the
the product, never disassemble, power off and unplug the power
repair or modify the product cord, the antenna cable and any
yourself. other wires connected to the
yy Otherwise, it may result in fire product.
or electric shock. ! yy Otherwise, it may result in
yy If the product needs to be electric shock or fire due to the
fixed, contact a service centre. damaged power cord.
English 7
Getting Started
If the product generates a strange Avoid letting children hang or climb
noise, a burning smell, or smoke, onto the product.
unplug the power plug immediately yy Otherwise, it may result in the
and contact a service centre. product falling and this may
yy Otherwise, it may result in result in injury or death.
! electric shock or fire.
If you drop the product or the Avoid placing objects such as toys
case is damaged, turn the power and cookies on top of the product.
off and unplug the power cord. yy If a child hangs over the
Contact a service centre. product to grab an object, the
yy Otherwise, it may result in fire object or the product may fall
or electric shock. and this may result in injury or
even death.
Take care not to block the vent by Avoid inserting metal objects such
a table cloth or curtain. 100
as a chopsticks, coins or hairpins,
yy Otherwise, it may result in fire or inflammable objects into the
due to internal overheating. product (the vents, ports, etc).
yy If water or substances enters
the product, turn the power
off, unplug the power cord and
contact a service centre.
yy Otherwise, it may result in a
problem with the product,
electric shock or fire.
English 8
Getting Started
Avoid placing a liquid container Do not press down hard on the
such as a vase, flowerpot, product. The product may become
beverage, cosmetics or drugs, or a deformed or damaged.
metal object over the product.
yy If water or substances enter
the product, turn the power
off, unplug the power cord
and contact a service centre.
yy Otherwise, it may result in a
problem with the product,
electric shock or fire.
Caution
Displaying a still image for a long When not using the product for
time may create a persistent image a long time such as leaving your
or stain on the screen. -_- home, unplug the power cord from
yy If you do not use the product the wall outlet.
!
for a long time, use the yy Otherwise, it may cause dust
power-saving mode or set the ! accumulation and result in fire
screensaver to the moving caused by overheating or short
picture mode. circuit or result in an electric
shock.
Set the appropriate resolution and Avoid turning the product upside
frequency for the product. down or move the product holding
yy Otherwise, it may result in eye only the stand.
strain. yy This may cause the product to
fall, resulting in damage to the
! product or injury.
It is important to give your eyes Since the display panel is hot after
some rest (5 minutes every hour) using it for a long time, do not touch
when viewing the product screen the product.
for long periods of time.
yy This will alleviate any eye
! strain.
English 9
Getting Started
Keep the small accessories in Take care when adjusting the angle
a location out of the reach of of the product or the height of the
children. stand.
yy If your hand or finger is caught,
you may be injured.
! !
yy If the product is tilted
excessively, the product may
fall and this may result in injury.
English 10
Getting Started
Accessories
✎✎Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
✎✎The items’ colours and shapes may vary depending on the models.
✎✎Cables not included in the package contents can be purchased separately.
✎✎Check that there is no accessory hidden behind packing materials when you open the box.
[ CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
yy CI Card Adapter
✎✎For best cable connection to this product, be sure to use cables with a maximum thickness as below:
English 11
Getting Started
Installing the Stand
✎✎Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
1 2 3
Insert the Stand Connector into the Check if the Stand Connector is firmly Turn the connecting screw at the
Stand in the direction shown by the connected. bottom of the stand fully so that it is
figure. completely fixed.
4 5 6
Place a soft cloth over the table to Push the assembled stand into the Firmly fasten the stand using the
protect the product and place the main body in the direction of the arrow screws.
product onto the cloth so that the front as shown in the figure.
of the product is facing downwards.
- Caution
If the height of " A " onB one side is Avoid lifting the product holding only
different from the other side, unfasten the stand.
the screws, adjust the heights, and
re-assemble.
English 12
Getting Started
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Control Panel
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
SOURCEE
button as you would use the ENTERE button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the Y buttons as you would use the
Y
◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
z
▼ and ▲ buttons on the remote control.
Speakers -
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English 13
Getting Started
Viewing the Remote Control
✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and
Volume buttons.
POWER SOURCE
Turns the TV on and off. Displays and selects the available video
sources.
Selects the HDMI mode directly. HDMI
Changes channels.
Adjusts the volume.
CH LIST
Displays the main on-screen menu. Displays channel lists on the screen
MENU (p. 23).
Displays the Content Home, which
includes Watch TV (p. 22), CONTENT GUIDE Displays the EPG (Electronic Programme
My Downloads (p. 36) Guide) (p. 22).
and Source (p. 21). TOOLS INFO
Displays information on the TV screen.
Quickly select frequently used functions.
English 14
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the mains and antenna.
ANT OUT
P
Select the desired OSD (On Screen Display) language.
3 Selecting a country Press the u or d button, then press the ENTERE button. Select the appropriate
country.
✎✎After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number. When you input the PIN number, “0-0-0-0”
is not available.
4 Setting the
Clock Mode
Set the Clock Mode automatically or manually.
5 Selecting an antenna Press the ▲ or ▼ button, then press the ENTERE button.
Select the Antenna source to memorise.
6 Selecting a channel Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Tuning (p. 24).
DVD /
HDMI OUT
Blu-ray player
DVI OUT
DVD /
AUDIO OUT
Blu-ray player
R W
R
R-AUDIO-L
W
Red White
English 16
Connections
Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR
DVD /
Blu-ray player VCR
R-AUDIO-L PR PB Y R-AUDIO-L
R W R B G R W Y
R
W
R
VCR / DVD
B
G
R
EXT
R W R B G R W Y
Y
✎✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
✎✎When connecting to AV IN, the colour of the AV IN [VIDEO] jack (green) will not match the video cable (yellow).
✎✎To obtain the best picture quality, the Component connection is recommended over the A/V connection.
English 17
Connections
Connecting to a COMMON INTERFACE slot
We recommand that you insert the CI card before you mount the TV on a wall.
It may be difficult to insert after the mounting.
Insert the card after attaching the CI CARD Adapter, on TV.
It is difficult to attach the module if you insert the card before attaching.
English 18
Connections
Connecting to an Audio Device
OPTICAL
English 19
Connections
Connecting to a PC
HDMI OUT
DVI OUT
AUDIO OUT
PC IN
AUDIO OUT
PC OUT
✎✎NOTE
xx For PC connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English 20
Connections
Changing the Input Source Edit Name
OO SOURCE → TOOLS → Edit Name → ENTERE
Source
In the Source, press the TOOLS button, and then you can
OO SOURCE → Source set an external input sources name you want.
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
Use to select TV or an external input SOURCE AV Receiver / Game / Camcorder / PC / DVI PC / DVI
sources such as a DVD / Blu-ray player
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
/ cable box /STB satellite receiver.
the device connected to the input jacks to make your
■■ TV / Ext. / PC / HDMI1/DVI input source selection easier.
/ HDMI2 / AV / Component / USB
✎✎When connecting a PC to the HDMI IN 1 (DVI) port
✎✎In the Source, connected inputs with HDMI cable, you should set the TV to PC mode
will be highlighted. under Edit Name.
✎✎TV, Ext. and PC always stay ✎✎When connecting a PC to the HDMI IN 1 (DVI) port
activated. with HDMI to DVI cable, you should set the TV to DVI
PC mode under Edit Name.
✎✎When connecting an AV devices to the HDMI IN 1
(DVI) port with HDMI to DVI cable, you should set the
TV to DVI Devices mode under Edit Name.
POWER ON/OFF
SOURCE Information
OO SOURCE → TOOLS → Information → ENTERE
You can see detailed information about the selected external
device.
MUTE
How to Navigate Menus How to Operate the OSD (On Screen Display)
Before using the TV, follow the steps below to learn how to The access step may differ depending on the selected menu.
navigate the menu and select and adjust different functions.
CH LIST
MENU
1 MENU m The main menu options appear on
the screen:
Picture, Sound, Channel, System,
CONTENT GUIDE 3
Support.
2 RETURN EXIT 4
4 ▲/▼ Select the desired submenu with
the ▲ or ▼ button.
A B C D
5 ◄/► Adjust the value of an item with the
◄ or ► button. The adjustment in
1 ENTERE / Direction button: Move the cursor and the OSD may differ depending on
@TV
select an item. Confirm the setting.f-g the selected menu.
MEDIA.P INTERNET DUAL
2 RETURN button: Returns to the previous menu.
3 MENU button: AD
DisplaysP.SIZE
the main SUBT.
on-screen menu.
6 ENTER E Press ENTERE to complete the
configuration.
English 21
Basic Features
Using the INFO button (Now & Next guide) Using Channel View
The display identifies the current channel INFO Guide 2:10 Tue 1 Jun
and the status of certain audio-video DTV Air 800 five
a Sche. Mgr b -24 Hours { +24 Hours } Ch. Mode ; Information k Page E Watch
If you want to move to the currently selected channel,
press the ENTERE button. • The displayed image may differ depending on the model.
abc1 18:11 Thu 6 Jan yy a Red (Sche. Mgr) : Displays the Schedule Manager.
18:00 ~ 6:00
DTV Air , Life On Venus Avenue
Unclassified a Information
yy b Green (-24 Hours): Viewing the list of programmes to
15 No Detaild Information
be broadcasted before 24 hours.
yy { Yellow (+24 Hours): Viewing the list of programmes to
be broadcasted after 24 hours.
Using the Channel Menu yy } Blue (Ch. Mode): Select the type of channels you
Press the CONTENT button to select Watch TV, and want to display on the Channel View window.
then select the menu you want to use. Each screen will be yy ; Information: Displays details of the selected
displayed. programme.
yy k (Page): Move to next or previous page.
yy E (Watch / Schedule)
Watch TV
Guide
–– When selecting the current programme, you can
watch the selected programme.
Schedule Manager
Channel List –– When selecting the future programme, you can
Channel Manager
reserve to watch the selected programme. To cancel
the schedule, press the ENTERE button again and
My Downloads Source select Cancel Schedules.
Schedule Manager
English 22
Basic Features
yy Antenna: Select the desired antenna source. How to use Timer Viewing in Channel List (digital channels only)
yy Channel: Select the desired channel. When you set the Timer Viewing in Channel List, you can
yy Repeat: Select Once, Manual, Sat~Sun, Mon~Fri only set the programme in Programme View.
or Everyday to set at your convenience. If you select 1. Press the CH LIST button, then select a desired digital
Manual, you can set the day you want. channel.
✎✎ The c mark indicates the date is selected. 2. Press the { (Programme View) button.
yy Date: you can set desired date. 3. Press the u / d buttons to select the desired
✎✎It is available when you select Once in Repeat. programme, then press the E (Information) button.
yy Start Time: You can set start time you want. 4. Select Timer Viewing, then press the ENTERE button
✎✎ On the Information screen, you can change or
when done.
cancel a reserved information. ✎✎If you want to cancel Timer Viewing, follow steps 1
xx Cancel Schedules: Cancel a show you have through 3. Select Cancel Schedules.
reserved to watch.
xx Edit: Change a show you have reserved to ¦¦ Using the Channel
watch.
xx Return: Return to the previous screen. OO CONTENT → Watch TV → Channel Manager →
ENTERE
Channel List
Channel Manager
OO CONTENT → Watch TV → Channel List → Edit the favourite channel and set the channels to Delete,
ENTERE
Deselect All or Select All. You can edit the channel name
You can view all the channel searched. only for analogue channels.
Channel List Channel Manager All 1/1 page
Selected item: 0 Ch.Number
All
6-1 TV#6
7 TV 7
a 3 Air
23 TV#6
33 TV#6
32 TV#6
a 9 Air
a 11 Air
• The displayed image may differ depending on the model. • The displayed image may differ depending on the model.
✎✎When you press the CH LIST button on the remote yy ( ) Channels: Select a channel in the All, TV, Radio,
control, Channel List screen will be displayed at once. Data/Other, Analogue and Favourites 1 - 5 screen.
OO Using the operation buttons with the Channel List. Change the antenna, or channel settings using the
menus in the top right corner of the screen.
xx a Red (Antenna): Switches to Air or Cable. yy (F) Favourites 1 - 5: Shows favourite channels.
xx { Yellow (Programme View / Channel View): ✎✎Using the colour buttons with the Channel Manager.
Displays the programme when digital channel is
selected. Returns to the channel view. xx a Red (Antenna): Switches to Air or Cable.
xx l r (Ch. Mode / Channel): Move to the type of xx } Blue (Sorting): Change the list ordered by channel
channels you want to display on the Channel List name or channel number.
screen.
✎✎
The option may differ depending on country.
xx E (Watch): Watches the channel you select.
xx k (Page): Move to next or previous page.
English 23
Basic Features
Channel Status Display Icons Channel Menu
Icons Operations
¦¦ Retuning Channels
a An analogue channel.
c A channel selected. OO MENUm → Channel → ENTERE
F A channel set as a Favourite.
\ A locked channel. Antenna (Air / Cable)t
Before your television can begin memorizing the available
Channel Manager Option Menut channels, you must specify the type of signal source that is
Set each channel using the Channel Manager menu connected to the TV.
options (Watch, Add to Favourites / Edit Favourites, Lock
/ Unlock, Edit Channel Name, Edit Channel Number, Country
Delete, Deselect All / Select All). Option menu items may
differ depending on the channel status. The PIN input screen appears. Enter your 4 digit PIN number.
1. Select a channel and press the TOOLS button. ✎✎Select your country so that the TV can correctly auto-
2. Select a function and change its settings. tune the broadcasting channels.
yy Watch: Watch the selected channel. ■■ Digital Channel: Change the country for digital
yy Add to Favourites / Edit Favouritest: Set channels.
channels you watch frequently as favourites. ■■ Analogue Channel: Change the country for analogue
1. Select the Add to Favourites / Edit Favourites, channels.
then press the ENTERE button.
✎✎ If the channel is already added to favourite Auto Tuning
channel, Edit Favourites will be shown.
2. Press the ENTERE button to select Favourites ✎✎Automatically allocated programme numbers may not
1 - 5, then press the OK button. correspond to actual or desired programme numbers.
✎✎ One favourite channel can be added in several If a channel is locked using the Channel Lock function,
of Favourites among Favourites 1 - 5. the PIN input window appears.
yy Lock / Unlockt: Lock a channel so that the ■■ Auto Tuning
channel cannot be selected and viewed. –– Air / Cable: Select the antenna source to memorise.
✎✎ This function is available only when the Channel Digital & Analogue / Digital / Analogue: Select the
Lock is set to On. channel source to memorise.
✎✎ The PIN input screen appears. Enter your 4-digit ✎✎ When selecting Cable → Digital & Analogue
PIN, the default of which is “0-0-0-0”. Change the or Digital: Provide a value to scan for cable
PIN using the Change PIN option. channels.
yy Edit Channel Name (analogue channels only): Assign xx Search Mode (Full / Network / Quick): Scans
your own channel name. for all channels with active broadcast stations
✎✎ This function may not support depending on the and stores them in the TV.
region. ✎✎ If you select Quick, you can set up the
yy Edit Channel Number : Edit the number by pressing the Network, Network ID, Frequency,
number buttons desired. Modulation and Symbol Rate manually
✎✎ This function may not support depending on the by pressing the button on the remote
control.
region.
yy Delete: You can delete a channel to display the channels xx Network (Auto / Manual): Selects the Network
you want. ID setting mode among Auto or Manual.
yy Deselect All / Select All: Select all the channels xx Network ID: When Network is Manual, you
or deselect all the selected channels in the channel can set up Network ID using the numeric
manager. buttons.
xx Frequency: Displays the frequency for the
channel. (differs in each country)
xx Modulation: Displays available modulation
values.
xx Symbol Rate: Displays available symbol rates.
English 24
Basic Features
■■ Cable Search Option Fine Tune
(depending on the country)
(analogue channels only)
Sets additional search options such as the frequency
If the reception is clear, you do not have to fine tune the
and symbol rate for a cable network search.
channel, as this is done automatically during the search and
–– Start Frequency / Stop Frequency: Set the start or store operation. If the signal is weak or distorted, fine tune
stop frequency (differs in each country). the channel manually. Scroll to the left or right until the image
–– Symbol Rate: Displays available symbol rates. is clear.
–– Modulation: Displays available modulation values.
✎✎Settings are applied to the channel you’re currently
watching.
Manual Tuning ✎✎Fine tuned channels that have been saved are marked
Scans for a channel manually and stores in the TV. with an asterisk “*” on the right-hand side of the
channel number in the channel banner
✎✎If a channel is locked using the Channel Lock function,
the PIN input window appears. ✎✎To reset the fine-tuning, select Reset.
■■ Digital Channel Tuning: Scans for a digital channel.
1. Press the a button to select New. Transfer Channel List
✎✎ When selecting Antenna → Air: Channel, The PIN input screen appears. Enter your 4 digit PIN number.
Frequency, Bandwidth Imports or exports the channel map. You should connect a
✎✎ When selecting Antenna → Cable: Frequency, USB storage to use this function.
Modulation, Symbol Rate ■■ Import from USB: Import channel list from USB.
2. Press the d button to select Search. When ■■ Export to USB: Export channel list to USB. this function
scanning has finnished, a channel is updated in the is available when USB is connected.
channel list.
■■ Analogue Channel Tuning: Scans for a analogue
channel. Picture Menu
1. Press the a button to select New.
2. Set the Programme, Colour System, Sound ¦¦ Changing the Preset Picture Mode
System, Channel and Search.
3. Press the d button to select Store. When scanning OO MENUm → Picture → Picture Mode → ENTERE
has finnished, a channel is updated in the channel
list.
✎✎Channel mode Picture Mode
xx P (programme mode): When tuning is complete, Select your preferred picture type.
P.MODE
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
✎✎When an input source is set to PC,
the Picture Mode is only available the
can select a channel by entering the position number
Standard and Entertain.
in this mode.
■■ Dynamic: Suitable for a bright room.
xx C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel ■■ Standard: Suitable for a normal
by entering the assigned number for each aerial environment.
broadcasting station or cable channel. ■■ Movie: Suitable for watching movies in a dark room.
■■ Entertain: Suitable for watching movies and games.
✎✎ Available only PC mode.
English 25
Basic Features
¦¦ Adjusting Picture Settings Screen Adjustment
OO MENUm → Picture → ENTERE ■■ Picture Size: Your cable box / satellite
receiver may have its own set of screen
P.SIZE
sizes as well. However, we highly
Samsung MagicAngle recommend you use 16:9 mode most of
the time.
This feature allows you to see optimal screen quality Auto Wide: Automatically adjusts the
according to your viewing position. When viewing the screen picture size to the 16:9 aspect ratio.
at an angle from below, above or the side of the product,
16:9: Sets the picture to 16:9 wide mode.
by setting the appropriate mode for each position you can
obtain a similar picture quality as viewing the screen directly Wide Zoom: Magnifies the picture size more than 4:3.
from the front. ✎✎ Adjusts the Position by using u / d buttons.
■■ Off: Select when viewing from the front position. Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
■■ Lean back mode: Select when viewing from a slightly
lower position.
✎✎ Adjusts the Zoom or Position by using u / d
button.
■■ Standing Mode: Select when viewing from the upper 4:3: Sets the picture to basic (4:3) mode.
position.
✎✎ Do not watch in 4:3 format for a long time. Traces
✎✎When Samsung MagicAngle is set to Lean back of borders displayed on the left, right and centre
mode or Standing Mode, Gamma is not available. of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Backlight / Contrast / Brightness / Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
Sharpness / Colour / Tint (G/R) (1080i / 1080p) signals are inputted.
Your television has several setting options for picture quality ✎✎ Adjusts the Position by using u / d / l / r
control. button.
✎✎NOTE ✎✎NOTE
xx In analogue TV, Ext., AV modes of the PAL system, xx Depending on the input source, the picture size
the Tint (G/R) function is not available. options may vary.
xx In PC mode, you can only make changes to xx The available items may differ depending on the
Backlight, Contrast , Brightness and Sharpness. selected mode.
xx Settings can be adjusted and stored for each xx In PC mode, only 16:9 and 4:3 modes can be
external device connected to the TV. adjusted.
xx Lowering picture brightness reduces power xx Settings can be adjusted and stored for each
consumption. external device connected to an input on the TV.
xx If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■■ 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS
(Wide Screen Service) size or the original size. Each
European country requires different picture size.
✎✎ Not available in PC, Component or HDMI mode.
English 26
Basic Features
■■ PC Screen Adjustment Maintaining the Correct Posture when Using this Product
✎✎ Available only PC mode.
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
Position: Adjusts the PC screen position with direction
button (u / d / l / r).
Image Reset: Resets the image to default settings.
English 27
Basic Features
Advanced Settings Picture Options
Black Tone : Off ► OO MENUm → Picture → Picture Options →
Dynamic Contrast : Medium ENTERE
Shadow Detail : -2
Gamma :0
✎✎In PC mode, you can only make changes to the
Colour Tone.
RGB Only Mode : Off
Colour Space : Native Picture Options
White Balance
Colour Tone : Warm2 ►
▼
Digital Noise Filter : Auto
U Move E Enter R Return MPEG Noise Filter : Auto
HDMI Black Level : Normal
■■ Black Tone (Off / Dark / Darker / Darkest): Select the Film Mode : Off
black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■■ Shadow Detail (-2~+2): Increase the brightness of dark U Move E Enter R Return
images.
■■ Colour Tone (Cool / Standard / Warm1 / Warm2)
■■ Gamma: Adjust the primary colour intensity.
■■ RGB Only Mode (Off / Red / Green / Blue): Displays
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
the Red, Green and Blue colour for making fine
adjustments to the hue and saturation. ✎✎ Settings can be adjusted and stored for each
external device connected to an input on the TV.
■■ Colour Space (Auto / Native): Adjust the range of
colours available to create the image. ■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation): If the broadcast signal received
■■ White Balance: Adjust the colour temperature for a by your TV is weak, you can activate the Digital Noise
more natural picture. Filter feature to reduce any static and ghosting that may
R-Offset / G-Offset / B-Offset: Adjust each colour’s appear on the screen.
(red, green, blue) darkness. ✎✎ When the signal is weak, try other options until the
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, best picture is displayed.
green, blue) brightness. Auto Visualisation: When changing analogue channels,
Reset: Resets the White Balance to it’s default settings. displays signal strength.
■■ Flesh Tone: Emphasize pink “Flesh Tone.” ✎✎ Only available for analogue channels.
■■ Edge Enhancement (Off / On): Emphasize object ✎✎ When bar is green, you are receiving the best
boundaries. possible signal.
■■ Motion Lighting (Off / On): Reduce power consumption ■■ MPEG Noise Filter (Off / Low / Medium / High /
by brightness control. Auto): Reduces MPEG noise to provide improved
picture quality.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode.
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
English 28
Basic Features
Reset Picture (OK / Cancel) ¦¦ Sound Systems, Etc.
Resets your current picture mode to its default settings.
OO MENUm → Sound → ENTERE
Sound Menu
Broadcast Audio Options
¦¦ Changing the Preset Sound Mode ■■ Audio Language
(digital channels only)
OO MENUm → Sound → Sound Mode → ENTERE Change the default value for audio languages.
✎✎ The available language may differ depending on
Sound Mode t the broadcast.
■■ Audio Format
■■ Standard: Selects the normal sound mode.
(digital channels only)
■■ Music: Emphasizes music over voices.
When sound is emitted from both the main speaker and
■■ Movie: Provides the best sound for movies. the audio receiver, a sound echo may occur due to the
decoding speed difference between the main speaker
■■ Clear Voice: Emphasizes voices over other sounds.
and the audio receiver. In this case, use the TV Speaker
■■ Amplify: Increase the intensity of high-frequency sound function.
to allow a better listening experience for the hearing ✎✎ Audio Format option may differ depending on
impaired. the broadcast. 5.1ch Dolby digital sound is only
✎✎If Speaker Select is set to External Speaker, Sound available when connecting an external speaker
Mode is disabled. through an optical cable.
■■ Audio Description
¦¦ Adjusting Sound Settings (not available in all locations) (digital AD/SUBT.
channels only)
This function handles the Audio
Sound Effect Stream for the AD (Audio Description)
which is sent along with the Main
OO MENUm → Sound → Sound Effect → ENTERE audio from the broadcaster.
(standard sound mode only) ✎✎ Audio Description (Off / On):
Turn the audio description
✎✎If Speaker Select is set to External Speaker, Sound function on or off.
Effect is disabled.
✎✎ Volume: Adjust the audio description volume.
■■ SRS TruSurround HD (Off / On)
This function provides a virtual 5.1
SRS Additional Setting
channel surround sound experience
through a pair of speakers using HRTF (digital channels only)
(Head Related Transfer Function)
■■ DTV Audio Level (MPEG / HE-AAC): This function
technology.
allows you to reduce the disparity of a voice signal
■■ SRS TruDialog (Off / On) (which is one of the signals received during a digital TV
This function allows you to increase the intensity of a broadcast) to a desired level.
voice over background music or sound effects so that ✎✎ According to the type of broadcast signal, MPEG
dialog can be heard more clearly. / HE-AAC can be adjusted between -10dB and
■■ Equalizer 0dB.
Adjusts the sound mode. ✎✎ To increase or decrease the volume, adjust
–– Balance L/R: Adjusts the balance between the right between the range 0 and -10 respectively.
and left speaker.
–– 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
–– Reset: Resets the equalizer to its default settings.
English 29
Basic Features
■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) ¦¦ Selecting the Sound Mode
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a When you set to Dual fg, the current DUALf-g
DVD player. sound mode is displayed on the screen.
Audio Format: You can select the Digital Audio output
(SPDIF) format.
✎✎ The available Digital Audio output (SPDIF) format
may differ depending on the input source.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms). Audio
Dual f-g Default
Type
■■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a Mono Mono Automatic
A2 change
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). Stereo Stereo ↔ Mono
Stereo
✎✎ Select Line to obtain dynamic sound, and RF Dual Dual f ↔ Dual g Dual f
to reduce the difference between loud and soft Mono Mono Automatic
sounds at night time. NICAM Stereo Mono ↔ Stereo change
Line: Set the output level for signals greater or less than Stereo Mono ↔ Dual f
-31dB (reference) to either -20dB or -31dB. Dual Dual f
Dual g
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB. ✎✎If the Stereo signal is weak and an automatic switching,
occurs, then switch to the Mono.
Speaker Settings ✎✎Only activated in stereo sound signal.
■■ Speaker Select (External Speaker / TV Speaker): A ✎✎Only available when the input Source is set to TV.
sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. System Menu
In this case, set the TV to External Speaker.
✎✎ When Speaker Select is set to External ¦¦ Setting the Time
Speaker, the volume and MUTE buttons will not
operate and the sound settings will be limited.
OO MENUm → System → ENTERE
✎✎ When Speaker Select is set to External
Speaker.
xx TV Speaker: Off, External Speaker: On Time
✎✎ When Speaker Select is set to TV Speaker. ■■ Clock: Setting the clock is for using various timer
xx TV Speaker: On, External Speaker: On features of the TV.
✎✎ If there is no video signal, both speakers will be OO The current time will appear every time you press
mute.
the INFO button.
■■ Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal. ✎✎ If you disconnect the power cord, you have to set
the clock again.
Night: This mode provides an improved sound
experience compared to Normal mode, making almost Clock Mode (Auto / Manual)
no noise. It is useful at night. xx Auto: Set the current time automatically using the
time from a digital channel.
Reset Sound (OK / Cancel) ✎✎ The antenna must be connected in order to set
the time automatically.
Reset all sound settings to the factory defaults. xx Manual: Set the current time manually.
✎✎ Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
English 30
Basic Features
Clock Set: Set the Day, Month, Year, Hour and Minute Setup: Select Off, Once, Everyday, Mon~Fri,
manually. Mon~Sat, Sat~Sun or Manual to set at you
✎✎ Available only when Clock Mode is set to convenience. If you select Manual, you can set up the
Manual. day you want to activate the timer.
✎✎ You can set the Day, Month, Year, Hour and ✎✎ The c mark indicates the day is selected.
Minute directly by pressing the number buttons On Time: Set the hour and minute.
on the remote control. Volume: Set the desired volume level.
Time Zone (Auto / Manual): Set the time zone to GMT. Source: Select TV or USB content to be played when
✎✎ This function is only available when the Clock the TV is turned on automatically. (USB can be selected
Mode is set to Auto. only when a USB device is connected to the TV)
–– GMT(GMT-3:00~GMT-1:00 / GMT / Antenna (when the Source is set to TV): Select ATV or
GMT+1:00~GMT+ 12:00): Selects your time zone. DTV.
✎✎ This function is only available when the Time Channel (when the Source is set to TV): Select the
Zone is set to Manual. desired channel.
Music / Photo (when the Source is set to USB): Select
–– DST(Daylight Saving Time) (Off / On): Switches the
a folder in the USB device containing music or photo
Daylight Saving Time function on or off.
files to be played when the TV is turned on automatically.
✎✎ This function is only available when the Time
✎✎ NOTE
Zone is set to Manual.
xx If there is no music file on the USB device or the
Using the Sleep Timer folder containing a music file is not selected, the
Timer function does not operate correctly.
■■ Sleep Timer t: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and xx When there is only one photo file in the USB,
180 minutes). the Slide Show will not play.
✎✎ To cancel Sleep Timer, select Off. xx If a folder name is too long, the folder cannot be
selected.
Setting the On / Off Timer xx Each USB you use is assigned its own folder.
■■ On Timer 1 / On Timer 2 / On Timer 3: Three different When using more than one of the same type of
on timer settings can be made. You must set the clock USB, make sure the folders assigned to each
first. USB have different names.
On Timer 1 xx It is recommended that you use a USB memory
Setup stick and a multi card reader when using On
Sun Mon Tue Wed Thu Fri Sat Timer. The On Timer function may not work
Once
with USB devices with a built-in battery, MP3
players, or PMPs made by some manufacturers
On Time Volume
because these devices take a long time to be
00 00 20 recognized.
Source Antenna Channel
TV ATV 1
English 31
Basic Features
■■ Off Timer 1 / Off Timer 2 / Off Timer 3: Three different ✎✎ When Program Rating Lock is set to 18, the
off timer settings can be made. You must set the clock PIN input screen appears before changing the
first. channels (France only).
Off Timer 1 ✎✎ You can block TV programs by set up rating in
Setup
Program Rating Lock as the I (children), T (All
Sun Mon Tue Wed Thu Fri Sat public), SC (Unclassified) and X (X rated). When
Once
Program Rating Lock is set to X, the PIN input
screen always before changing the channels
Off Time
(Spain only).
00 00 ✎✎ You can block TV programs by set up rating in
Program Rating Lock as the Children, Youth or
Adult (Sweden only).
■■ Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them.
L Move U Adjust E Enter R Return
Change your personal ID number required to set up
Setup: Select Off, Once, Everyday, Mon~Fri, the TV. Re-enter the same 4 digits. When the Confirm
Mon~Sat, Sat~Sun or Manual to set at you screen disappears, your PIN has been memorised.
convenience. If you select Manual, you can set up the
How to watch a restricted channel
day you want to activate the timer.
✎✎ The c mark indicates the day is selected. If the TV is tuned to a restricted channel, the Program
Rating Lock will block it. The screen will go blank
Off Time: Set the hour and minute. and the following message will appear: This channel is
blocked by Program Rating Lock. Please enter the PIN
¦¦ Locking Programmes to unblock.
✎✎ If you forget the PIN, press the remote-control
OO MENUm → System → Security → ENTERE buttons in the following sequence, which resets
the pin to “0-0-0-0:” POWER (off) → MUTE → 8
→ 2 → 4 → POWER (on)
Security
✎✎The PIN input screen appears before the setup screen. ¦¦ Economical Solutions
✎✎Enter your 4-digit PIN, the default of which is “0-0-0-0”. OO MENUm → System → Eco Solution → ENTERE
Change the PIN using the Change PIN option.
■■ Channel Lock (Off / On): Lock channels in Channel
Manager, to prevent unauthorized users, such as Eco Solution
children, from watching unsuitable programme.
■■ Energy Saving (Off / Low / Medium / High / Picture
✎✎ Available only when the input Source is set to TV. Off)t: This adjusts the brightness of the TV
■■ Program Rating Lock (depending on the country): in order to reduce power consumption. If you select
Prevent unauthorized users, such as children, from Picture Off, the screen is turned off, but the sound
watching unsuitable programme with a user-defined remains on. Press any button except volume button to
4-digit PIN code. If selected channel is locked, the “\” turn on the screen.
symbol will be displayed.
■■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):
Allow All: Unlock All TV ratings (Not supported in France To avoid unnecessary energy consumption, set how long
and Sweden). you want the TV to remain on if it’s not receiving a signal.
✎✎ Disabled when the PC is in power saving mode.
■■ Auto Power Off (Off / On): Saves power by turning TV
off automatically when no user operation is received for
4 hours.
English 32
Basic Features
¦¦ Other Features General
OO MENUm → System → ENTERE ■■ Max. Power Saving (Off / On): Turn off PC monitor
when PC is not used for certain length of time to reduce
power consumption.
Language ✎✎ Available only PC mode.
■■ Menu Language: Set the menu language. ■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
■■ Teletext Language: Set a desired language for teletext. a more realistic gaming experience by selecting game
✎✎ English is the default in cases where the selected mode.
language is unavailable in the broadcast.
✎✎NOTE
■■ Preference (Primary Audio Language / Secondary xx Precautions and limitations for game mode
Audio Language / Primary Subtitle Language /
–– To disconnect the game console and connect
Secondary Subtitle Language / Primary Teletext
another external device, set Game Mode to Off in
Language / Secondary Teletext Language): Select
the setup menu.
a language, which will be the default language when a
channel is selected. –– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available when the input source
Subtitle is set to TV or PC.
Use this menu to set the Subtitle mode. xx After connecting the game console, set Game Mode
AD/SUBT. to On. Unfortunately, you may notice reduced picture
■■ Subtitle (Off / On): Switches subtitles
on or off. quality.
English 33
Basic Features
Common Interface ■■ PIP (Off / On): Activate or deactivate the PIP function.
■■ Channel: Select the channel for the sub-screen.
■■ CI Menu: This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu ■■ Size (Õ / Ã): Select a size for the sub-picture.
PC Card. ■■ Position (à / – / — / œ): Select a position for the
■■ Application Info: View information on the CAM inserted sub-picture.
into the CI slot and on the “CI or CI+ CARD” which is ■■ Sound Select (Main / Sub): You can choose the
inserted into the CAM. You can install the CAM anytime desired sound (Main / Sub) in PIP mode.
whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by Support Menu
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the OO MENUm → Support → ENTERE
direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so Self Diagnosis
that it aligns parallel with the slot.
✎✎Self Diagnosis might take few seconds, this is part of
4. Check if you can see a picture on a scrambled signal the normal operation of the TV
channel.
■■ Picture Test (Yes / No): Use to check for picture
problems.
¦¦ Picture In Picture (PIP) Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
OO MENUm → System → PIP → ENTERE problem with the TV. Contact Samsung’s Call Centre for
assistance.
No: If the test pattern is properly displayed, select No.
PIP t There may be a problem with your external equipment.
You can watch the TV tuner and one external video source Please check your connections. If the problem persists,
simultaneously. PIP (Picture-in-Picture) does not function in refer to the external device’s user manual.
the same mode. ■■ Sound Test (Yes / No): Use the built-in melody sound to
✎✎NOTE check for sound problems.
xx For PIP sound, refer to the Sound Select ✎✎ If you hear no sound from the TV’s speakers,
instructions. before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
xx If you turn the TV off while watching in PIP mode, the Sound menu.
PIP window will disappear.
✎✎ The melody will be heard during the test even if
xx You may notice that the picture in the PIP window Speaker Select is set to External Speaker or the
becomes slightly unnatural when you use the main sound is muted by pressing the MUTE button.
screen to view a game or karaoke.
Yes: If you can hear sound only from one speaker or not
xx While Program Rating Lock is in operation, the PIP at all during the sound test, select Yes. There may be a
function cannot be used. problem with the TV. Contact Samsung’s Call Centre for
xx PIP settings assistance.
No: If you can hear sound from the speakers, select No.
Main picture Sub picture
There may be a problem with your external equipment.
Component, HDMI1/DVI, Please check your connections. If the problem persists,
TV
HDMI2, PC refer to the external device’s user manual.
English 34
Basic Features
■■ Signal Information: (digital channels only) An HD ■■ By Channel: Upgrade the software using the
channel’s reception quality is either perfect or the broadcasting signal.
channels are unavailable. Adjust your antenna to ✎✎ If the function is selected during the software
increase signal strength. transmission period, software will be automatically
■■ Troubleshooting: If the TV seems to have a problem, searched and downloaded.
refer to this description. ✎✎ The time required to download the software is
✎✎ If none of these troubleshooting tips apply, contact determined by the signal status.
the Samsung customer service centre. ■■ Alternative Software (backup): If there is an issue with
the new firmware and it is affecting operation, you can
change the software to the previous version.
Software Upgrade
✎✎ If the software was changed, existing software is
Software Upgrade can be performed via a broadcasting displayed.
signal or downloading the latest firmware from “www.
samsung.com,” to a USB memory device. ■■ Standby Mode Upgrade (Off / 1 hour later / 2 hours
later / 00:00 / 02:00 / 12:00 / 14:00): A manual upgrade
Current Version the software already installed in the TV.
will be automatically performed at selected time. Since
✎✎Software is represented as “Year/Month/Day_Version”. the power of the unit is turned on internally, the screen
may be turned on slightly for the LED product. This
Software Upgrade phenomenon may continue for more than 1 hour until
Current Version 2011/01/18_000001 the software upgrade is complete.
English 35
Advanced Features
Using the My Downloads
Photos
button.
OO CONTENT → My Downloads → ENTERE
English 36
Advanced Features
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx If a file deleted from the PC is still found when My Downloads is run, use the “Empty the Recycle Bin” function on the
PC to permanently delete the file.
xx My Downloads only supports sequential jpeg format.
xx The scene search and thumbnail functions are not supported in the Videos.
¦¦ Screen Display
Move to the desired file using the u / d / l / r buttons and then press the ENTERE or � (Play) button. The file is
played. My Downloads screen may differ depending on the way to enter the screen.
Music_9 Music_10
No singer No singer
English 37
Advanced Features
yy Supported Video Formats
Frame rate Bit rate
File Extension Container Video Codec Resolution Audio Codec
(fps) (Mbps)
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
XviD 1920x1080 6 ~ 30 8
*.avi AVI MP3 / AC3 / LPCM /
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
*.mkv MKV ADPCM / DTS Core
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
Motion JPEG 640x480 6 ~ 30 8
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
XviD 1920x1080 6 ~ 30 8
MP3 / AC3 / LPCM /
*.asf ASF H.264 BP / MP / HP 1920x1080 6 ~ 30 25
ADPCM / WMA
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
Motion JPEG 640x480 6 ~ 30 8
*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
*.mp4 MP4 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 MP3 / ADPCM / AAC
XVID 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
*.3gp 3GPP ADPCM / AAC / HE-AAC
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
xx If the Index Table is in error, the Seek (Jump) function is not supported.
xx Some USB/digital camera devices may not be compatible with the player.
Video Decoder Audio Decoder
• Supports up to H.264, Level 4.1 • Supports up to WMA 7, 8, 9, STD
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not • WMA 9 PRO does not support 2 channel excess multi channel or
supported. lossless audio.
• XVID, MPEG4 SP, ASP : • WMA sampling rate 22050Hz mono is not supported.
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
• GMC 2 over is not supported.
English 38
Advanced Features
Music
Playing Music
1. Press the u / d / l / r button to select the desired Music
in the file list.
Music 1/2
2. Press the ENTERE button or � (Play) button.
–– You can use � (REW) and µ (FF) buttons during
playback.
✎✎Only displays the files with MP3 and PCM file extension.
Other file extensions are not displayed, even if they are
saved on the same USB device.
✎✎If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file SUM E Enter L Page T Tools R Return
may cause a sound problem.)
• The displayed image may differ depending on the model.
Playing selected music
1. Press the { (Edit Mode) button.
2. Select the desired music.
✎✎ The c mark appears to the left of the selected files.
3. Press the TOOLS button and select Play Selected Contents.
✎✎ You can select or deselect all music pressing the Select All / Deselect All.
Photos
Viewing a Photo (or Slide Show)
1. Press the u / d / l / r button to select the desired photo
in the file list.
Normal
2. Press the ENTERE button.
–– When a selected photo is displayed, press the ENTERE
button to start the slide show.
–– During the slide show, all files in the file list will be
displayed in order.
–– When you press the � (Play) button in the file list, slide
show will be started immediately.
✎✎Music files can be automatically played during the Slide
Show if the Background Music is set to On. E Pause L Previous/Next T Tools R Return
English 39
Advanced Features
¦¦ My Downloads - Additional Functions
English 40
Advanced Features
Anynet+ (HDMI-CEC)
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
yy You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
yy The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
yy The Anynet+ functions do not operate with other manufacturers’ products.
yy For the method of connecting external devices , refer to the supported user manual.
Anynet+ Anynet+
Device 1 Home Theatre Device 2
HDMI OUT HDMI OUT Digital Audio Input HDMI IN HDMI OUT
HDMI Cable
Optical Cable
1. Connect the HDMI IN (1(DVI), 2) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
xx You can connect only one Home Theatre.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.
English 41
Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) Tools Shows the tools menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
✎✎Depending on the device, this menu may not be available.
(device_name) Title Menu Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title
menu of the DVD recorder will appear.
✎✎ Depending on the device, this menu may not be available.
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦¦ Setting Up Anynet+
English 42
Advanced Features
¦¦ Recording
You can make a recording of a TV Programme using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, press the a button in the Device List menu to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
English 43
Advanced Features
¦¦ Troubleshooting for Anynet+
The connected device is not • Check whether or not the device supports Anynet+ functions.
displayed. • Check whether or not the HDMI cable is properly connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
• Search Anynet+ devices again.
• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
• If connection is terminated because there has been a power interruption or the HDMI cable has been
disconnected, please repeat the device scan.
The TV Programme cannot be • Check whether the antenna jack on the recording device is properly connected.
recorded.
The TV sound is not output • Connect the optical cable between TV and the receiver.
through the receiver.
English 44
Other Information
Installing the Device Driver
✎✎If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device
driver is included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung
Electronics website (www.samsung.com), and download the driver.
1. Insert the driver installation CD into the CD-ROM drive.
2. Click on Windows Driver.
3. Complete the remaining installation steps according to the instructions displayed on the screen.
4. Select the model of your product from the model list.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more
information, refer to the document about the Windows operating system.
English 45
Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎✎You can change Teletext pages by pressing the numeric buttons on the remote control.
English 46
Other Information
Attaching a Wall Mount/Desktop Stand
3 4
A Wall/Desktop
B Stand Mount
A B Wall mount kit/desktop stand (not supplied)
5. Align wall mount/desktop stand to the Monitor/TV and firmly fix the wall mount/desktop stand by fastening the screw.
6. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top
stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw.
✎✎NOTE
xx If you use screws that are longer than the standard specifications, the inside of the product may be
damaged.
xx For wall mounts that are not compatible with the standard VESA specifications, the length of the screw
may differ depending on the corresponding specifications.
English 47
Other Information
xx Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling
them using excessive force. This may result in damage to the product or injury due to the product falling.
Samsung shall not be held liable for any damage or injury.
xx Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/
desktop stand that is not compatible with the specifications or due to an installation not performed by an
authorized installation engineer.
xx When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93
inches) of space from the wall.
xx Use the wall mount according to the international specifications.
Assembling the Cables
Use the Cable Holder to hide the cables behind the stand.
✎✎The colour and the appearance may differ depending on the product, and the specifications are subject to change
without prior notice to improve the performance.
✎✎These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on the TV model.
English 48
Other Information
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues Solutions and Explanations
PC Connection
A Mode Not Supported message • Set your PC’s output resolution and frequency so they match the resolutions supported by the TV
appears. (p. 20).
PC is always shown on the source list, • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
even if a PC is not connected.
The video is OK but there is no audio. • If you are using a HDMI connection, check the audio output setting on your PC.
Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (p. 34)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it • If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component
did in the store. cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto programme.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and
definition of the signal.
The picture is distorted: macro block error, • Compression of video contents may cause picture distortion especially in fast moving pictures such
small block, dots, pixelization as sports and action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and
digital TV.
Colour is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness. • Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
(p. 26)
• Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution -
Energy Saving) (p. 32)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture)
(p.29)
There is a dotted line on the edge of the • If the picture size is set to Screen Fit, change it to 16:9 (p. 26).
screen. • Change cable/set top box resolution.
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture • If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
freezes or is distorted or delayed. the cable box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (p. 34)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low • Please check the volume the of external device connected to your TV.
at maximum volume.
The picture is good but there is no sound. • Set the Speaker Select option to TV Speaker in the sound menu (p. 30).
• If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate • Check the cable connections. Make sure a video cable is not connected to an audio input.
noise. • For antenna or cable connections, check the signal strength. Low signal level may cause sound
distortion.
English 49
Other Information
Issues Solutions and Explanations
No Picture, No Video
The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “The remote control does not work” below.
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the System menu (p. 31).
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if
there is no signal.
There is no picture/Video. • Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be connect
to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
RF(Cable/Antenna) Connection
The TV is not receiving all channels. • Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU -
System - Plug & Play (Initial setup) and wait for all available channels to be stored (p. 15).
• Verify the Antenna is positioned correctly.
The picture is distorted: macro block error • Compression of video contents may cause picture distortion, especially with fast moving pictures
small block, dots, pixelization such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
Others
The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from
your TV.
• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control • Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
doesn’t turn the TV on or off, or adjust the manual for the SAMSUNG TV code.
volume.
A “Mode Not Supported” message • Check the supported resolution of the TV, and adjust the external device’s output resolution
appears. accordingly (p. 27).
There is a plastic smell from the TV. • This smell is normal and will dissipate over time.
The TV Signal Information is unavailable • This function is only available with digital channels from an Antenna / RF/Coax connection (p. 35).
in the Self Diagnostic Test menu.
The TV is tilted to the side. • Remove the base stand from the TV and reassemble it.
There are difficulties assembling the stand • Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, use a
base. magnetized screw driver.
English 50
Other Information
Issues Solutions and Explanations
The channel menu is greyed out. • The Channel menu is only available when the TV source is selected.
(unavailable)
Your settings are lost after 30 minutes or • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
every time the TV is turned off. the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU → System → Plug & Play (Initial
setup) → ENTERE (p. 15).
You have intermittent loss of audio or • Check the cable connections and reconnect them.
video. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
You see small particles when you look • This is part of the product’s design and is not a defect.
closely at the edge of the frame of the TV.
The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or components source (p. 34).
The message “Scramble signal” or “Weak • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
Signal/No Signal” appears. • If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.
You turned the TV off 45 minutes ago, and • It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
it turned on again. downloaded whilst your watching TV.
There are recurrent picture/sound issues. • Check and change the signal/source.
A reaction may occur between the rubber • To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
cushion pads on the base stand and the
top finish of some furniture.
✎✎This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.skrhk
✎✎If you attched some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to
watch TV.
Do not spray water or a cleaning agent directly onto the Clean the product with a soft cloth dapped in a small amount
product. Any liquid that goes into the product may cause a of water.
failure, fire, or electric shock.
English 51
Other Information
¦¦ Licence
TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. © DTS, Inc. All Rights Reserved.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.
com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673; 7,460,688; 7,519,274
¦¦ WEEE
English 52
Other Information
Specifications
(Without Stand) 525.5 × 329.0 × 34.8 mm 559.1 × 348.7 × 31.2 mm 581.4 × 360.5 × 32.7 mm 648.1 × 398.9 × 31.8 mm
Dimensions
(WxHxD) 525.5 × 414.4 × 220.6 559.1 × 433.8 × 220.6 581.4 × 446.1 × 220.6 648.1 × 485.7 × 235.0
(With Stand)
mm mm mm mm
✎✎NOTE
xx Design and specifications are subject to change without prior notice.
xx For information about power supply, and more about power consumption, refer to the label attached to the product.
xx Some models may not be available for purchase depending on the region.
xx If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
xx DPM(Display Power Management) Function does not work if you used in conjunction with the HDMI IN 1 (DVI) port
of this product.
English 53
Other Information
Index
A F R
Accessories 11 Film Mode 28 Receiver 42
Advanced Settings 27 Fine Tune 25 Recording 43
Amplify 29 Flesh Tone 28 Remote Control 14
Antenna 15 Repeat Mode 40
Anynet+ (HDMI-CEC) 41 H RGB Only Mode 28
Audio Description 29 Rotate 40
HDMI 41
Auto Adjustment 27
Headphones 19
Auto Volume 30
Home Theatre 41
S
Safety Precautions 4
B
I Samsung MagicAngle 26
Background Music 40 Select All 24
Installation Space 2
Balance L/R 29 Self Diagnosis 34
Installation Related 5
Batteries 14 Sharpness 26
Installing the Device Driver 45
Black Tone 28 Signal Information 35
Brightness 26 Sleep Timer 31
L Slide Show 39
C Language 33 Software Upgrade 35
Licence 52 Source 21
Cable Holder 48
Speaker Select 30
Change PIN 32
Specifications 53
Channel List 23 M Standby mode 13
Channel Manager 23 Menu Transparency 33 Subtitle 33
Channel Menu 24 Music 39 Symbol 3
Cleaning Related 7 My Downloads 36
Clock 30
Colour Tone 28
T
Component 17
N Timer 31
Connecting to a PC 20 Navigate 21 Title Search 40
Connecting to an Antenna 15 Now & Next guide 22 TOOLS 3
Connecting to an Audio Device 19 Troubleshooting 49
Connecting to an AV Device 16 O TV Speaker 30
On Timer 31
D Off Timer 32 U
DIGITAL AUDIO OUT 41 Optimal resolution 20 USB Drive 36
DivX® VOD 33 Usage Related 7
D-sub 20 P Using the Channel Menu 22
Dynamic 25
Photos 39
Dynamic Contrast 28
Picture Options 28 V
Picture Size 26 VCR 16
E PIP (Picture in Picture) 34 Video Formats 38
Edit Name 21 Plug & Play 15 Videos 37
Energy Saving 32 Power Indicator 13 Volume 31
EPG (Electronic Programme Guide) 22 Power Related 4
Equalizer 29 W
External Speaker 30
Wall Mount 47
Watch TV 22
WEEE 52
English 54
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.