Samsung T22a300 Manual Do Utilizador
Samsung T22a300 Manual Do Utilizador
Samsung T22a300 Manual Do Utilizador
user manual
Digital TV notice
1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local
dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6. For more information, please contact your local Samsung customer care centre.
✎✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV
performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or
not.
10 cm 10 cm
10 cm 10 cm 10 cm 10 cm
10 cm
English 2
Contents
Getting Started 4 Safety Precautions
4
11 Accessories
12 Viewing the Control Panel
13 Viewing the Remote Control
14
14 Plug & Play (Initial Setup)
15 Connecting to an AV Device
16 Connecting to a COMMON INTERFACE slot
16 Connecting to a Audio device and PC
18 Changing the Input Source
18
19 Using the INFO button (Now & Next guide)
19 Using the Channel Menu
21 Channel Menu
22 Picture Menu
25 Sound Menu
27 System Menu
30 Support Menu
32
ENGLISH
Other Information 36 Analogue Channel Teletext Feature
36
37 Attaching a Wall Mount/Desktop Stand
38 Assembling the Cables
38 Anti-theft Kensington Lock
39 Troubleshooting
43 Specifications
t
TOOLS This function can be used by Note Step by Step Guide
pressing the TOOLS button on the
remote control.
English 3
Getting Started
Safety Precautions
Failing to follow the precautions marked with this sign may result in a serious injury or
Warning even a fatality.
Failing to follow the precautions marked with this sign may result in a personal injury or
Caution property damage.
Do not perform.
Must be followed.
¦¦ Power Related
✎✎ The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power Avoid connecting multiple electric
cord or plug or a loose power appliances to a single wall outlet.
outlet. yy Otherwise, it may result in fire
yy Otherwise, it may result in due to overheating of the wall
electric shock or fire. outlet.
Make sure to connect the power Avoid bending or twisting the power
cord to a grounded wall outlet (for cord excessively and avoid placing
insulation class 1 equipment only). heavy objects on the cord.
yy Otherwise, it may result in yy Otherwise, it may result in
electric shock or injury. electric shock or fire due to a
! damaged power cord.
English 4
Getting Started
Keep the power cord and the If the pins of the power plug or the
product away from a heater. wall outlet are covered in dust, clean
y Otherwise, it may result in it using a dry cloth.
electric shock or fire. y Otherwise, it may result in fire.
Caution
Avoid unplugging the power plug Make sure to use only the power
while the product is operating. cord supplied by our company. In
y Otherwise, it may damage the addition, do not use the power cord
product due to electric shock. of another electric appliance.
y Otherwise, it may result in
! electric shock or fire.
When unplugging the power plug Connect the power plug to a wall
from the wall outlet, make sure to outlet that can be easily reached.
hold it by the plug and not by the y When a problem occurs
cord. with the product, you must
y Otherwise, it may result in unplug the power plug to cut
! electric shock or fire. ! the power off completely.
You cannot cut the power
off completely using only the
power button on the product.
¦ Installation Related
Warning
Avoid placing burning candles, Ask an installation engineer or
mosquitorepellentor cigarettes on relevant company to install the
the product. product onto the wall.
y Otherwise, it may result in fire. y Otherwise, it may result in
injury.
!
y Make sure to use the specified
wall mount.
Avoid installing the product in a Keep the plastic bags used to pack
badly-ventilated location such as the product away from children.
inside a bookshelf or closet. y If children place the plastic
y Otherwise, it may result in fire bags over their heads, they may
due to internal over-heating. suffocate.
!
English 5
Getting Started
Avoid installing the product in a Avoid installing the product where
location exposed to direct sunlight children may reach it.
and installing the product near a y If a child touches the product,
heat source such as a fireplace or the product may fall and this
heater. may result in injury.
y This may shorten the product y Since the front part is heavier,
life cycle or cause fire. install the product on a flat and
stable surface.
Bend the outdoor antenna cable Install the antenna far away from
downwards at the location where any high voltage cables.
it comes in the house so that y If the antenna touches or falls
rainwater does not flow in. onto a high voltage cable, it
y If rainwater enters the product, may result in electric shock or
! it may result in electric shock ! fire.
or fire.
Caution
Do not let the product drop while Do not place the product face down
moving it. on the floor.
y This may result in a problem y This may damage the panel of
with the product or injury. the product.
English 6
Getting Started
¦ Cleaning Related
Warning
Before cleaning the product, When cleaning the product, do
unplug the power cord. not spray water directly over the
y Otherwise, it may result in product parts.
electric shock or fire. y Make sure that water does not
enter the product.
!
y Otherwise, it may result in fire,
electric shock or a problem with
the product.
Caution
Avoid spraying cleansing agent When cleaning the product,
directly onto the product. disconnect the power cord and
y This may result in discoloration clean the product with the supplied
or cracking of the exterior cleaning cloth.
of the product or the panel y Avoid using chemicals such as
coming off. ! wax, benzene, alcohol, thinner,
mosquitorepellent, fragrance,
lubrication or cleansing agent
when cleaning the product.
This may result in the exterior
being deformed or the print
being removed.
If you can't get the product clean Since the exterior of the product is
with just the supplied cloth, use a easily scratched, be sure to use the
soft, damp cloth with a "monitor- supplied cleansing cloth.
exclusive cleansing agent" and
wipe the product with it.
! y If no monitor-exclusive !
cleansing agent is available,
dilute a cleansing agent with
water at a ratio of 1:10 before
cleaning the product.
¦ Usage Related
Warning
Since a high voltage runs through To move the product, turn the
the product, never disassemble, power off and unplug the power
repair or modify the product cord, the antenna cable and any
yourself. other wires connected to the
y Otherwise, it may result in fire product.
or electric shock. ! y Otherwise, it may result in
y If the product needs to be electric shock or fire due to the
fixed, contact a service centre. damaged power cord.
English 7
Getting Started
If the product generates a strange Avoid letting children hang or climb
noise, a burning smell, or smoke, onto the product.
unplug the power plug immediately yy Otherwise, it may result in the
and contact a service centre. product falling and this may
yy Otherwise, it may result in result in injury or death.
! electric shock or fire.
If you drop the product or the Avoid placing objects such as toys
case is damaged, turn the power and cookies on top of the product.
off and unplug the power cord. yy If a child hangs over the
Contact a service centre. product to grab an object, the
yy Otherwise, it may result in fire object or the product may fall
or electric shock. and this may result in injury or
even death.
Take care not to block the vent by Avoid inserting metal objects such
a table cloth or curtain. 100
as a chopsticks, coins or hairpins,
yy Otherwise, it may result in fire or inflammable objects into the
due to internal overheating. product (the vents, ports, etc).
yy If water or substances enters
the product, turn the power
off, unplug the power cord and
contact a service centre.
yy Otherwise, it may result in a
problem with the product,
electric shock or fire.
English 8
Getting Started
Avoid placing a liquid container Do not press down hard on the
such as a vase, flowerpot, product. The product may become
beverage, cosmetics or drugs, or a deformed or damaged.
metal object over the product.
y If water or substances enter
the product, turn the power
off, unplug the power cord
and contact a service centre.
y Otherwise, it may result in a
problem with the product,
electric shock or fire.
Caution
Displaying a still image for a long When not using the product for
time may create a persistent image a long time such as leaving your
or stain on the screen. -_- home, unplug the power cord from
y If you do not use the product the wall outlet.
!
for a long time, use the y Otherwise, it may cause dust
power-saving mode or set the ! accumulation and result in fire
screensaver to the moving caused by overheating or short
picture mode. circuit or result in an electric
shock.
Set the appropriate resolution and Avoid turning the product upside
frequency for the product. down or move the product holding
y Otherwise, it may result in eye only the stand.
strain. y This may cause the product to
fall, resulting in damage to the
! product or injury.
It is important to give your eyes Since the display panel is hot after
some rest (5 minutes every hour) using it for a long time, do not touch
when viewing the product screen the product.
for long periods of time.
y This will alleviate any eye
! strain.
English 9
Getting Started
Keep the small accessories in Take care when adjusting the angle
a location out of the reach of of the product or the height of the
children. stand.
yy If your hand or finger is caught,
you may be injured.
! !
yy If the product is tilted
excessively, the product may
fall and this may result in injury.
English 10
Getting Started
Accessories
✎ Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
✎ The items’ colours and shapes may vary depending on the models.
✎ Cables not included in the package contents can be purchased separately.
✎ Check that there is no accessory hidden behind packing materials when you open the box.
[ CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
y Remote Control & Batteries (AAA x 2) y Cleaning Cloth
y Warranty Card / Safety Guide (Not available in some locations) y Power Cord
y Stand Connector / Screws (4ea) y Stand Base
y HDMI-DVI Cable
English 11
Getting Started
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Control Panel
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
SOURCEE
button as you would use the ENTERE button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the Y buttons as you would use the
Y
◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
z
▼ and ▲ buttons on the remote control.
Speakers -
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English 12
Getting Started
Viewing the Remote Control
✎✎This is a special remote control for the visually impaired and has Braille points on the Channel and Number buttons.
Turns the TV on and off. Displays and selects the available video
sources.
Changes channels.
Adjusts the volume.
Displays the main on-screen menu. Displays channel lists on the screen.
Displays the Content Home, which CONTENT GUIDE Displays the EPG (Electronic Programme
includes Watch TV, My Downloads Guide).
and Source.
English 13
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the mains and antenna.
ANT OUT
Power Input
P
Select the desired OSD (On Screen Display) language.
3 Selecting a country
(Depending on the
Press the u or d button, then press the ENTERE button. Select the appropriate
country.
country) ✎✎After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number. When you input the PIN number, “0-0-0-0”
is not available.
4 Setting the
Clock Mode
Set the Clock Mode automatically or manually.
yy Auto: Select the time zone (depending on the country) where you are located.
yy Manual: Allows you to manually set the current date and time.
5 Selecting an antenna Press the ▲ or ▼ button, then press the ENTERE button.
Select the Antenna source to memorise.
6 Selecting a channel Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Tuning.
DVD /
HDMI OUT
Blu-ray player
✎✎HDMI IN 1(DVI), 2
xx If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.
xx The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
xx A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet
function via HDMI.
VCR / DVD
EXT
✎✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
✎✎SERVICE: Connector for service only.
English 15
Connections
Connecting to a COMMON INTERFACE slot
✎✎Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are
connected, the sound from the built-in speakers will be disabled.
xx Sound function may be restricted when connecting headphones to the TV.
xx Headphone volume and TV volume are adjusted separately.
English 16
Connections
Using an HDMI cable or an HDMI to DVI cable
✎✎Connecting through the HDMI cable may not be supported depending on the PC.
HDMI OUT
DVI OUT
✎✎NOTE
xx For PC connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
xx PC(D-Sub) input is not supported.
English 17
Connections
Changing the Input Source Edit Name
OO SOURCE → TOOLS → Edit Name → ENTERE
Source
In the Source, press the TOOLS button, and then you can
OO SOURCE → Source set an external input sources name you want.
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
Use to select TV or an external input
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
sources such as a DVD / Blu-ray player /
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
cable box /STB satellite receiver.
the device connected to the input jacks to make your
■■ TV / Ext. / HDMI1/DVI / HDMI2 / USB input source selection easier.
✎✎In the Source, connected inputs will ✎✎When connecting a PC to the HDMI IN 1 (DVI) port
be highlighted. with HDMI cable, you should set the TV to PC mode
✎✎TV and Ext. always stay activated. under Edit Name.
✎✎When connecting a PC to the HDMI IN 1 (DVI) port
with HDMI to DVI cable, you should set the TV to DVI
PC mode under Edit Name.
✎✎When connecting an AV devices to the HDMI IN 1
(DVI) port with HDMI to DVI cable, you should set the
TV to DVI Devices mode under Edit Name.
Information
OO SOURCE → TOOLS → Information → ENTERE
You can see detailed information about the selected external
device.
TTX/MIX
Basic Features
How to Navigate Menus How to Operate the OSD (On Screen Display)
Before using the TV, follow the steps below to learn how to The access step may differ depending on the selected menu.
navigate the menu and select and adjust different functions.
CONTENT GUIDE
1 MENU m The main menu options appear on
the screen:
Picture, Sound, Channel, System,
3
Support.
5
2 4 ◄/► Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
A
1 ENTERE / Direction B
button:CMove Dthe cursor and the selected menu.
select an item. Confirm the setting.
E-MANUAL P.SIZE AD/SUBT.
2 RETURN button: Returns to the previous menu.
6 ENTER E Press ENTERE to complete the
configuration.
English 18
Basic Features
Using the INFO button (Now & Next guide) Using Channel View
The display identifies the current channel Guide 2:10 Tue 1 Jun
and the status of certain audio-video DTV Air 800 five
abc1
18:00 ~ 6:00
18:11 Thu 6 Jan
yy a Red (Sche. Mgr) : Displays the Schedule Manager.
DTV Air , Life On Venus Avenue
Unclassified a Information yy b Green (-24 Hours): Viewing the list of programmes to
15 No Detaild Information
Schedule Manager
• The displayed image may differ depending on the model. OO CONTENT → Watch TV → Schedule Manager →
ENTERE
You can view, modify or delete a channel you have reserved
to watch.
Guide
Using the Timer Viewing
OO CONTENT → Watch TV → Guide → ENTERE You can set a desired channel to be displayed automatically
The EPG (Electronic Programme Guide) at the intended time. Set the current time first to use this
GUIDE
information is provided by broadcasters. function.
Using programme schedules provided by 1. Press the ENTERE button to select Schedule
broadcasters, you can specify programmes Manager.
you want to watch in advance so that
2. Press the ENTERE button to add programme to
the channel automatically changes to
schedule manually. The Timer Viewing screen appears.
the selected programme channel at the
specified time. Programme entries may 3. Press the l / r / u / d buttons to set the Antenna,
appear blank or out of date depending on a channel status. Channel, Repeat, Date or Start Time.
English 19
Basic Features
y Antenna: Select the desired antenna source. How to use Timer Viewing in Channel List (digital channels only)
y Channel: Select the desired channel. When you set the Timer Viewing in Channel List, you can
y Repeat: Select Once, Manual, Sat~Sun, Mon~Fri only set the programme in Programme View.
or Everyday to set at your convenience. If you select 1. Press the CH LIST button, then select a desired digital
Manual, you can set the day you want. channel.
✎ The c mark indicates the date is selected. 2. Press the { (Programme View) button.
y Date: you can set desired date. 3. Press the u / d buttons to select the desired
✎
It is available when you select Once in Repeat. programme, then press the E (Information) button.
y Start Time: You can set start time you want. 4. Select Timer Viewing, then press the ENTERE button
when done.
✎
On the Information screen, you can change or
cancel a reserved information. ✎ If you want to cancel Timer Viewing, follow steps 1
x Cancel Schedules: Cancel a show you have through 3. Select Cancel Schedules.
reserved to watch.
x Edit: Change a show you have reserved to ¦ Using the Channel
watch.
x Return: Return to the previous screen. O CONTENT → Watch TV → Channel Manager →
ENTERE
Channel List
Channel Manager
O CONTENT → Watch TV → Channel List →
Edit the favourite channel and set the channels to Delete,
ENTERE
Deselect All or Select All. You can edit the channel name
You can view all the channel searched. only for analogue channels.
Channel List Channel Manager All 1/2 page
Selected item: 4 Ch.Number
All
1 TV#1
2 The Spo...
3 Pardon...
4 Real Sp...
6 The Daily
7 Pros vs.
8 Today
9 Pardon...
Air a Antenna { Programme View L Ch. Mode E Watch k Page Air a Antenna } Sorting k Page E Select T Tools R Return
• The displayed image may differ depending on the model. • The displayed image may differ depending on the model.
✎ When you press the CH LIST button on the remote y ( ) Channels: Select a channel in the All, TV, Radio,
control, Channel List screen will be displayed at once. Data/Other, Analogue and Favourites 1 - 5 screen.
Change the antenna, or channel settings using the
O Using the operation buttons with the Channel List.
menus in the top right corner of the screen.
x a Red (Antenna): Switches to Air or Cable.
y (F) Favourites 1 - 5: Shows favourite channels.
x { Yellow (Programme View / Channel View):
✎ Using the colour buttons with the Channel Manager.
Displays the programme when digital channel is
selected. Returns to the channel view. x a Red (Antenna): Switches to Air or Cable.
x l r (Ch. Mode / Channel): Move to the type of x } Blue (Sorting): Change the list ordered by channel
channels you want to display on the Channel List name or channel number.
screen.
✎ The option may differ depending on country.
x E (Watch / Information): Watches the channel you
select. / Displays details of the selected programme.
x k (Page): Move to next or previous page.
English 20
Basic Features
Channel Status Display Icons Channel Menu
Icons Operations
¦¦ Retuning Channels
a An analogue channel.
c A channel selected. OO MENUm → Channel → ENTERE
F A channel set as a Favourite.
\ A locked channel. Antenna (Air / Cable)t
Before your television can begin memorizing the available
Channel Manager Option Menut channels, you must specify the type of signal source that is
connected to the TV.
Set each channel using the Channel Manager menu
options (Watch, Add to Favourites / Edit Favourites, Lock
/ Unlock, Edit Channel Name, Edit Channel Number, Country
Delete, Deselect All / Select All). Option menu items may (depending on the country)
differ depending on the channel status.
The PIN input screen appears. Enter your 4 digit PIN number.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
✎✎Select your country so that the TV can correctly auto-
tune the broadcasting channels.
yy Watch: Watch the selected channel.
■■ Digital Channel: Change the country for digital
yy Add to Favourites / Edit Favouritest: Set channels.
channels you watch frequently as favourites.
■■ Analogue Channel: Change the country for analogue
1. Select the Add to Favourites / Edit Favourites,
channels.
then press the ENTERE button.
✎✎ If the channel is already added to favourite
channel, Edit Favourites will be shown. Auto Tuning
2. Press the ENTERE button to select Favourites (depending on the country)
1 - 5, then press the OK button.
✎✎ One favourite channel can be added in several ✎✎Automatically allocated programme numbers may not
correspond to actual or desired programme numbers.
of Favourites among Favourites 1 - 5.
If a channel is locked using the Channel Lock function,
yy Lock / Unlockt: Lock a channel so that the the PIN input window appears.
channel cannot be selected and viewed.
■■ Auto Tuning
✎✎ This function is available only when the Channel
–– Air / Cable: Select the antenna source to memorise.
Lock is set to On.
Digital & Analogue / Digital / Analogue: Select the
✎✎ The PIN input screen appears. Enter your 4-digit channel source to memorise.
PIN, the default of which is “0-0-0-0”. Change the
PIN using the Change PIN option. ✎✎ When selecting Cable → Digital & Analogue
or Digital: Provide a value to scan for cable
yy Edit Channel Name (analogue channels only): Assign channels.
your own channel name.
✎✎ This function may not support depending on the
xx Search Mode (Full / Network / Quick): Scans
for all channels with active broadcast stations
region.
and stores them in the TV.
yy Edit Channel Number : Edit the number by pressing the
number buttons desired.
✎✎ If you select Quick, you can set up the
Network, Network ID, Frequency,
✎✎ This function may not support depending on the Modulation and Symbol Rate manually
region. by pressing the button on the remote
yy Delete: You can delete a channel to display the channels control.
you want. xx Network (Auto / Manual): Selects the Network
yy Deselect All / Select All: Select all the channels ID setting mode among Auto or Manual.
or deselect all the selected channels in the channel
manager.
xx Network ID: When Network is Manual, you
can set up Network ID using the numeric
buttons.
xx Frequency: Displays the frequency for the
channel. (differs in each country)
xx Modulation: Displays available modulation
values.
xx Symbol Rate: Displays available symbol rates.
English 21
Basic Features
■■ Cable Search Option Fine Tune
(depending on the country)
(analogue channels only)
Sets additional search options such as the frequency
If the reception is clear, you do not have to fine tune the
and symbol rate for a cable network search.
channel, as this is done automatically during the search and
–– Start Frequency / Stop Frequency: Set the start or store operation. If the signal is weak or distorted, fine tune
stop frequency (differs in each country). the channel manually. Scroll to the left or right until the image
–– Symbol Rate: Displays available symbol rates. is clear.
–– Modulation: Displays available modulation values.
✎✎Settings are applied to the channel you’re currently
watching.
Manual Tuning ✎✎Fine tuned channels that have been saved are marked
Scans for a channel manually and stores in the TV. with an asterisk “*” on the right-hand side of the
channel number in the channel banner
✎✎If a channel is locked using the Channel Lock function,
the PIN input window appears. ✎✎To reset the fine-tuning, select Reset.
■■ Digital Channel Tuning: Scans for a digital channel.
1. Press the a button to select New. Transfer Channel List
✎✎ When selecting Antenna → Air: Channel, The PIN input screen appears. Enter your 4 digit PIN number.
Frequency, Bandwidth Imports or exports the channel map. You should connect a
✎✎ When selecting Antenna → Cable: Frequency, USB storage to use this function.
Modulation, Symbol Rate ■■ Import from USB: Import channel list from USB.
2. Press the d button to select Search. When ■■ Export to USB: Export channel list to USB. This function
scanning has finnished, a channel is updated in the is available when USB is connected.
channel list.
■■ Analogue Channel Tuning: Scans for a analogue
channel. Picture Menu
1. Press the a button to select New.
2. Set the Programme, Colour System, Sound ¦¦ Changing the Preset Picture Mode
System, Channel and Search.
3. Press the d button to select Store. When scanning OO MENUm → Picture → Picture Mode → ENTERE
has finnished, a channel is updated in the channel
list.
✎✎Channel mode Picture Mode t
xx P (programme mode): When tuning is complete, Select your preferred picture type.
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
✎✎When connecting a PC, the Picture Mode is only
available the Standard and Entertain.
can select a channel by entering the position number
in this mode. ■■ Dynamic: Suitable for a bright room.
xx C (aerial channel mode) / S (cable channel mode): ■■ Standard: Suitable for a normal environment.
These two modes allow you to select a channel ■■ Movie: Suitable for watching movies in a dark room.
by entering the assigned number for each aerial
broadcasting station or cable channel. ■■ Entertain: Suitable for watching movies and games.
✎✎ It is only available when connecting a PC.
English 22
Basic Features
¦¦ Adjusting Picture Settings Screen Adjustment
OO MENUm → Picture → ENTERE ■■ Picture Size: Your cable box / satellite
receiver may have its own set of screen
P.SIZE
sizes as well. However, we highly
Samsung MagicAngle recommend you use 16:9 mode most of
the time.
Adjust screen viewing Angle to optimize screen quality Auto Wide: Automatically adjusts the
according to your viewing position. picture size to the 16:9 aspect ratio.
■■ Samsung MagicAngle: When viewing the screen at an 16:9: Sets the picture to 16:9 wide mode.
angle from below or above by setting the appropriate Wide Zoom: Magnifies the picture size more than 4:3.
mode for each position you can obtain a similar picture
quality as viewing the screen directly from the front.
✎✎ Adjusts the Position by using u / d buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit
xx Off: Select when viewing from the front position. the screen size.
xx Lean back mode: Select when viewing from a ✎✎ Adjusts the Zoom or Position by using u / d
slightly lower position. button.
xx Standing Mode: Select when viewing from the 4:3: Sets the picture to basic (4:3) mode.
upper position. ✎✎ Do not watch in 4:3 format for a long time. Traces
■■ Mode: Adjust screen viewing angle. of borders displayed on the left, right and centre
of the screen may cause image retention (screen
✎✎When Samsung MagicAngle is set to Lean back burn) which are not covered by the warranty.
mode or Standing Mode, Gamma is not available.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) signals are inputted.
Backlight / Contrast / Brightness / ✎✎ Adjusts the Position by using u / d / l / r
Sharpness / Colour / Tint (G/R) button.
Your television has several setting options for picture quality ✎✎NOTE
control.
xx Depending on the input source, the picture size
✎✎NOTE options may vary.
xx In analogue TV, Ext., AV modes of the PAL system, xx The available items may differ depending on the
the Tint (G/R) function is not available. selected mode.
xx When connecting a PC, you can only make xx When connecting a PC, only 16:9 and 4:3 modes
changes to Backlight, Contrast, Brightness and can be adjusted.
Sharpness. xx Settings can be adjusted and stored for each
xx Settings can be adjusted and stored for each external device connected to an input on the TV.
external device connected to the TV. xx If you use the Screen Fit function with HDMI 720p
xx Lowering picture brightness reduces power input, 1 line will be cut at the top, bottom, left and
consumption. right as in the overscan function.
■■ 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS
(Wide Screen Service) size or the original size. Each
European country requires different picture size.
✎✎ Not available in HDMI mode.
English 23
Basic Features
Maintaining the Correct Posture when Using this Product
Advanced Settings
Black Tone : Off ►
Dynamic Contrast : Medium
Shadow Detail : -2
Gamma :0
RGB Only Mode : Off
Colour Space : Native
White Balance
▼
English 24
Basic Features
Picture Options Reset Picture (OK / Cancel)
OO MENUm → Picture → Picture Options → Resets your current picture mode to its default settings.
ENTERE
Sound Menu
✎✎When connecting a PC, you can only make changes to
the Colour Tone.
¦¦ Changing the Preset Sound Mode
Picture Options
Colour Tone : Warm2 ► OO MENUm → Sound → Sound Mode → ENTERE
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
Sound Mode t
HDMI Black Level : Normal
Film Mode : Off ■■ Standard: Selects the normal sound mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for movies.
■■ Clear Voice: Emphasizes voices over other sounds.
U Move E Enter R Return
■■ Amplify: Increase the intensity of high-frequency sound
■■ Colour Tone (Cool / Standard / Warm1 / Warm2) to allow a better listening experience for the hearing
impaired.
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎ Settings can be adjusted and stored for each ¦¦ Adjusting Sound Settings
external device connected to an input on the TV.
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation): If the broadcast signal received
Sound Effect
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
OO MENUm → Sound → Sound Effect → ENTERE
appear on the screen. (standard sound mode only)
✎✎ When the signal is weak, try other options until the ■■ SRS TruSurround HD (Off / On) t
best picture is displayed. This function provides a virtual 5.1 channel surround
Auto Visualisation: When changing analogue channels, sound experience through a pair of speakers using
displays signal strength. HRTF (Head Related Transfer Function) technology.
✎✎ Only available for analogue channels. ■■ SRS TruDialog (Off / On)
✎✎ When bar is green, you are receiving the best This function allows you to increase the intensity of a
possible signal. voice over background music or sound effects so that
■■ MPEG Noise Filter (Off / Low / Medium / High / dialog can be heard more clearly.
Auto): Reduces MPEG noise to provide improved ■■ Equalizer
picture quality. Adjusts the sound mode.
■■ HDMI Black Level (Low / Normal): Selects the black –– Balance L/R: Adjusts the balance between the right
level on the screen to adjust the screen depth. and left speaker.
✎✎ Available only in HDMI mode (RGB signals). –– 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to frequencies.
automatically sense and process film signals from all
–– Reset: Resets the equalizer to its default settings.
sources and adjust the picture for optimum quality.
✎✎ Available in TV mode, EXT and HDMI (1080i).
✎✎ If the screen does not seem natural, change its
option to Off / Auto1 / Auto2 in Film Mode.
English 25
Basic Features
¦¦ Sound Systems, Etc. ■■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
OO MENUm → Sound → ENTERE voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎✎ Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
Broadcast Audio Options sounds at night time.
Line: Set the output level for signals greater or less than
■■ Audio Language
-31dB (reference) to either -20dB or -31dB.
(digital channels only) RF: Set the output level for signals greater or less than
Change the default value for audio languages. -20dB (reference) to either -10dB or -20dB.
✎✎ The available language may differ depending on
the broadcast.
Speaker Settings
■■ Audio Format
(digital channels only) ■■ Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Select the audio format.
Night: This mode provides an improved sound
■■ Audio Description
experience compared to Normal mode, making almost
(not available in all locations) (digital no noise. It is useful at night.
AD/SUBT.
channels only)
This function handles the Audio
Stream for the AD (Audio Description) Reset Sound (OK / Cancel)
which is sent along with the Main Reset all sound settings to the factory defaults.
audio from the broadcaster.
✎✎ Audio Description (Off / On): ¦¦ Selecting the Sound Mode t
Turn the audio description
function on or off. When you set to Dual fg, the current sound mode is
✎✎ Volume: Adjust the audio description volume. displayed on the screen.
Audio
Dual f-g Default
Additional Settings Type
Mono Mono Automatic
(digital channels only) A2
Stereo Stereo ↔ Mono change
■■ DTV Audio Level (MPEG / HE-AAC): This function Stereo
Dual Dual f ↔ Dual g Dual f
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV Mono Mono Automatic
broadcast) to a desired level. NICAM Stereo Mono ↔ Stereo change
✎✎ According to the type of broadcast signal, MPEG Stereo
Dual
Mono ↔ Dual f
Dual f
/ HE-AAC can be adjusted between -10dB and Dual g
0dB.
✎✎ To increase or decrease the volume, adjust ✎✎If the Stereo signal is weak and an automatic switching,
between the range 0 and -10 respectively. occurs, then switch to the Mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the input Source is set to TV.
English 26
Basic Features
System Menu On Timer 1
Setup
Sun Mon Tue Wed Thu Fri Sat
00 00 20
Source Antenna Channel
Time TV ATV 1
OO The current time will appear every time you press Setup: Select Off, Once, Everyday, Mon~Fri,
the INFO button.
Mon~Sat, Sat~Sun or Manual to set at your
✎✎ If you disconnect the power cord, you have to set convenience. If you select Manual, you can set up the
the clock again. day you want to activate the timer.
Clock Mode (Auto / Manual) ✎✎ The c mark indicates the day you've selected.
xx Auto: Set the current time automatically using the On Time: Set the hour and minute.
time from a digital channel. Volume: Set the desired volume level.
✎✎ The antenna must be connected in order to set Source: Select TV or USB content to be played when
the time automatically. the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
xx Manual: Set the current time manually. Antenna (when the Source is set to TV): Select ATV or
✎✎ Depending on the broadcast station and signal, DTV.
the auto time set up may not be correct. In this
case, set the time manually. Channel (when the Source is set to TV): Select the
desired channel.
Clock Set: Set the Day, Month, Year, Hour and Minute
Music / Photo (when the Source is set to USB): Select
manually.
a folder in the USB device containing music or photo
✎✎ Available only when Clock Mode is set to files to be played when the TV is turned on automatically.
Manual.
✎✎ NOTE
✎✎ You can set the Day, Month, Year, Hour and xx If there is no music file on the USB device or the
Minute directly by pressing the number buttons
folder containing a music file is not selected, the
on the remote control.
Timer function does not operate correctly.
Time Zone (Auto / Manual) (depending on the country):
Select your time zone.
xx When there is only one photo file in the USB,
the Slide Show will not play.
✎✎ This function is only available when the Clock
Mode is set to Auto. xx If a folder name is too long, the folder cannot be
selected.
Using the Sleep Timer xx Each USB you use is assigned its own folder.
When using more than one of the same type of
■■ Sleep Timer t: Automatically shuts off the TV
USB, make sure the folders assigned to each
after a preset period of time. (30, 60, 90, 120, 150 and
USB have different names.
180 minutes).
✎✎ To cancel Sleep Timer, select Off. xx It is recommended that you use a USB memory
stick and a multi card reader when using On
Setting the On / Off Timer Timer.
■■ On Timer 1 / On Timer 2 / On Timer 3: Three different xx The On Timer function may not work with
USB devices with a built-in battery, MP3
on timer settings can be made. You must set the clock
players, or PMPs made by some manufacturers
first.
because these devices take a long time to be
recognized.
English 27
Basic Features
■■ Off Timer 1 / Off Timer 2 / Off Timer 3: Three different ■■ Change PIN: The Change PIN screen will appear.
off timer settings can be made. You must set the clock Choose any 4 digits for your PIN and enter them.
first. Change your personal ID number required to set up
the TV. Re-enter the same 4 digits. When the Confirm
Off Timer 1
screen disappears, your PIN has been memorised.
Setup
Sun Mon Tue Wed Thu Fri Sat
¦¦ Economical Solutions
Once
Off Time
OO MENUm → System → Eco Solution → ENTERE
00 00
Eco Solution
■■ Energy Saving (Off / Low / Medium / High / Picture
L Move U Adjust E Enter R Return
Off)t: This adjusts the brightness of the TV
in order to reduce power consumption. If you select
Setup: Select Off, Once, Everyday, Mon~Fri, Picture Off, the screen is turned off, but the sound
Mon~Sat, Sat~Sun or Manual to set at your remains on. Press any button except volume button to
convenience. If you select Manual, you can set up the turn on the screen.
day you want to activate the timer. ■■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):
✎✎ The c mark indicates the day you've selected. To avoid unnecessary energy consumption, set how long
Off Time: Set the hour and minute. you want the TV to remain on if it’s not receiving a signal.
✎✎ Disabled when the PC is in power saving mode.
¦¦ Locking Programmes ■■ Auto Power Off (Off / On): Saves power by turning TV
off automatically when no user operation is received for
OO MENUm → System → Security → ENTERE 4 hours.
✎✎The PIN input screen appears before the setup screen. OO MENUm → System → ENTERE
✎✎Enter your 4-digit PIN, the default of which is “0-0-0-0”.
Change the PIN using the Change PIN option.
Language
■■ Channel Lock (Off / On): Lock channels in Channel
Manager, to prevent unauthorized users, such as ■■ Menu Language: Set the menu language.
children, from watching unsuitable programme. ■■ Teletext Language: Set a desired language for teletext.
✎✎ Available only when the input Source is set to TV. ✎✎ English is the default in cases where the selected
■■ Program Rating Lock (depending on the country): language is unavailable in the broadcast.
Prevent unauthorized users, such as children, from ■■ Preference (Primary Audio Language / Secondary
watching unsuitable programme with a user-defined Audio Language / Primary Subtitle Language /
4-digit PIN code. If selected channel is locked, the “\” Secondary Subtitle Language / Primary Teletext
symbol will be displayed. Language / Secondary Teletext Language): Select
✎✎ The items of Program Rating Lock differs a language, which will be the default language when a
depending on the country. channel is selected.
English 28
Basic Features
Subtitle General
Use this menu to set the Subtitle mode. ■■ Game Mode (Off / On): When connecting to a game
AD/SUBT.
■■ Subtitle (Off / On): Switches subtitles console such as PlayStation™ or Xbox™, you can enjoy
on or off. a more realistic gaming experience by selecting game
mode.
■■ Subtitle Mode (Normal / Hearing
Impaired): Sets the subtitle mode. ✎✎NOTE
■■ Subtitle Language: Sets the subtitle xx Precautions and limitations for game mode
language. –– To disconnect the game console and connect
✎✎ If the programme you are watching does another external device, set Game Mode to Off in
not support the Hearing Impaired function, the setup menu.
Preferred automatically activates even if the –– If you display the TV menu in Game Mode, the
Hearing Impaired mode is selected. screen shakes slightly.
✎✎ English is the default in cases where the selected xx Game Mode is not available when the input source
language is unavailable in the broadcast. is set to TV or PC.
xx After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
Digital Text (Disable / Enable) quality.
(UK only) xx If Game Mode is On:
If the programme broadcasts with digital text, this feature is –– Picture mode is set to Standard and Sound mode
enabled. is set to Movie.
■■ Menu Transparency (Bright / Dark): Set the
Auto Protection Time Transparency of the menu.
■■ Boot Logo (Off / On): Display Samsung logo when the
■■ Off / 2 hours / 4 hours / 8 hours / 10 hours: If the
TV is turned on.
screen remains idle with a still image for a certain period
of time defined by the user, the screen saver is activated
to prevent the formation of ghost images on the screen. Common Interface
■■ CI Menu: This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu
PC Card.
■■ Application Info: View information on the CAM inserted
into the CI slot and on the “CI or CI+ CARD” which is
inserted into the CAM. You can install the CAM anytime
whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
English 29
Basic Features
¦¦ Picture In Picture (PIP) Support Menu
English 30
Basic Features
Software Upgrade ■■ By Channel: Upgrade the software using the
broadcasting signal.
Software Upgrade can be performed via a broadcasting
signal or downloading the latest firmware from “www.
✎✎ If the function is selected during the software
transmission period, software will be automatically
samsung.com,” to a USB memory device.
searched and downloaded.
Current Version the software already installed in the TV.
✎✎ The time required to download the software is
✎✎Software is represented as “Year/Month/Day_Version”. determined by the signal status.
■■ Alternative Software (backup): If there is an issue with
Software Upgrade
the new firmware and it is affecting operation, you can
Current Version 2011/01/18_000001 change the software to the previous version.
✎✎ If the software was changed, existing software is
By USB displayed.
By Channel ■■ Standby Mode Upgrade (Off / 1 hour later / 2 hours
Alternative Software 2011/01/15_00000 later / 00:00 / 02:00 / 12:00 / 14:00): A manual upgrade
Standby Mode Upgrade : Off will be automatically performed at selected time. Since
the power of the unit is turned on internally, the screen
may be turned on slightly for the LED product. This
U Move E Enter R Return
phenomenon may continue for more than 1 hour until
the software upgrade is complete.
English 31
Advanced Features
Using the My Downloads
Music
English 32
Advanced Features
xx If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xx The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx My Downloads only supports sequential jpeg format.
¦¦ Screen Display
Move to the desired file using the u / d / l / r buttons and then press the ENTERE button. The file is played. My
Downloads screen may differ depending on the way to enter the screen.
Music_9 Music_10
No singer No singer
English 33
Advanced Features
Music
Playing Music
1. Press the u / d / l / r button to select the desired Music
Music
in the file list. 1/2
Photos
Viewing a Photo (or Slide Show)
1. Press the u / d / l / r button to select the desired photo Normal
English 34
Advanced Features
¦¦ My Downloads - Additional Functions
English 35
Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎✎You can change Teletext pages by pressing the numeric buttons on the remote control.
English 36
Other Information
Attaching a Wall Mount/Desktop Stand
3 4
A Wall/Desktop
B Stand Mount
A B Wall mount kit/desktop stand (not supplied)
4. Align wall mount/desktop stand to the Monitor/TV and firmly fix the wall mount/desktop stand by fastening the screw.
5. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top
stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw.
✎✎NOTE
xx If you use screws that are longer than the standard specifications, the inside of the product may be damaged.
xx For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ
depending on the corresponding specifications.
English 37
Other Information
x Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using
excessive force. This may result in damage to the product or injury due to the product falling. Samsung shall not be
held liable for any damage or injury.
x Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/desktop stand
that is not compatible with the specifications or due to an installation not performed by an authorized installation
engineer.
x When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of
space from the wall.
x Use the wall mount according to the international specifications.
✎ The colour and the appearance may differ depending on the product, and the specifications are subject to change
without prior notice to improve the performance.
✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎ The locking device has to be purchased separately.
✎ The location of the Kensington slot may be different depending on the TV model.
English 38
Other Information
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues Solutions and Explanations
Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor
picture may caused by the source or signal.
The TV image does not look as good as it • If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI to deliver HD
did in the store. (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto tuning.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and
definition of the signal.
The picture is distorted: macroblock error, • Compression of video contents may cause picture distortion especially in fast moving pictures such
small block, dots, pixelization as sports and action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and
digital TV.
There is poor colour or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy
Saving)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture)
There is a dotted line on the edge of the • If the picture size is set to Screen Fit, change it to 16:9.
screen. • Change cable/satellite box resolution.
When changing channels, the picture • If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
freezes or is distorted or delayed. the cable box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to
MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low • Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
at maximum volume.
The picture is good but there is no sound. • If you are using a DVI to HDMI cable, TV set does not support audio.
• Reboot the connected device by reconnecting the device’s power cable.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate • For antenna or cable connections, check the signal strength. Low signal level may cause sound
noise. distortion.
No Picture, No Video
The TV will not turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “The remote control does not work” below.
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if
there is no signal.
English 39
Other Information
Issues Solutions and Explanations
There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
• Reboot the connected device by reconnecting the device’s power cable.
RF(Cable/Antenna) Connection
The TV is not receiving all channels. • Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU -
System - Plug & Play (Initial setup) and wait for all available channels to be stored.
• Verify the Antenna is positioned correctly.
The picture is distorted: macro block error • Compression of video contents may cause picture distortion, especially on fast moving pictures such
small block, dots, pixelization. as sports and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
Others
The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from
your TV.
• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control • Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
doesn’t turn the TV on or off, or adjust the manual for the SAMSUNG TV code.
volume.
A “Mode Not Supported” message • Check the supported resolution of the TV, and adjust the external device’s output resolution
appears. accordingly.
There is a plastic smell from the TV. • This smell is normal and will dissipate over time.
The TV Signal Information is unavailable • This function is only available with digital channels from an Antenna / RF / Coax connection.
in the Self Diagnosis Test menu.
TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand • Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please
base. use a magnetized screw driver.
The Channel menu is grey out • The Channel menu is only available when the TV source is selected.
(unavailable).
Your settings are lost after 30 minutes or • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
every time the TV is turned off. the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU → System → Plug & Play (Initial
setup) → ENTERE.
You have intermittent loss of audio or • Check the cable connections and reconnect them.
video. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
You see small particles when you look • This is part of the product’s design and is not a defect.
closely at the edge of the frame of the TV.
English 40
Other Information
Issues Solutions and Explanations
The PIP menu is not available. • PIP functionality is only available when you are using a HDMI source.
You turned the TV off 45 minutes ago, and • It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
it turned on again. downloaded whilst your watching TV.
The message “Scramble signal” or “Weak • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
Signal/No Signal” appears. • If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.
There are recurrent picture/sound issues. • Check and change the signal/source.
A reaction may occur between the rubber • To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
cushion pads on the base stand and the
top finish of some furniture.
✎ This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.skrhk
✎ If you attched some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to
watch TV.
Do not spray water or a cleaning agent directly onto the Clean the product with a soft cloth dapped in a small amount
product. Any liquid that goes into the product may cause a of water.
failure, fire, or electric shock.
[ CAUTION
If the height of " A " on one side is different from the other
side, adjust the heights.
English 41
Other Information
¦¦ Licence
TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
¦¦ WEEE
English 42
Other Information
Specifications
✎✎NOTE
xx Design and specifications are subject to change without prior notice.
xx For information about power supply, and more about power consumption, refer to the label attached to the product.
xx Some models may not be available for purchase depending on the region.
xx If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
xx DPM(Display Power Management) Function does not work if you used in conjunction with the HDMI IN 1 (DVI) port
of this product.
English 43
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.