Professional Documents
Culture Documents
Muñeca Monica
Muñeca Monica
"Doll Monica"
This pattern does not contain crochet lessons and is designed for people who
have basic crochet skills. Difficulty level: intermediate.
Distribution, full and partial copying, sale, donation or exchange of this pattern, as
well as translation into other languages are prohibited. Let's appreciate and
respect the work of everyone!
You can use toys made with this pattern at your discretion.
Please credit me as the designer @crochetfriends_toys when posting finished
works on your pages in social media.
-2-
Tips:
The toy is crocheted in semi-crosses stitches. If you crochet in checkmarks, then
you will have to determine the number of extra stitches yourself. The shoes are
also crocheted in semi-crosses. The dress and panties are crocheted in
checkmarks.
Crochet tightly so that there are no holes.
All pieces are crocheted in a spiral, unless otherwise is indicated.
The size of the finished toy when using the indicated materials - about 25 cm.
Abbreviations:
MR - magic ring
ch - chain
t-ch - turning chain
sc - single crochet
inc - increase (2 sc in one stitch)
dec - decrease (2 sc together)
sl st - slip stitch
hdc - half double crochet
hdc2tog - crochet 2 hdc together
dc - double crochet
dcinc - double crochet increase (2 dc in one stitch)
Bobble st - crochet the required number of DC stitches in one stitch with a
common top
(...) - the number in brackets means the number of stitches in the round(row)
(...)*N - repeat N times indicated stitches in brackets
-3-
Materials & Tools:
Yarn::
for black doll:
- Alize Cotton Gold 100g/330m, color 446 (beige) - for the body.
- YarnArt Baby cotton 50g/165m, color 460 (black) - for the hair wig.
- YarnArt Baby cotton 50g/165m, color 400 (white) - for the panties.
- YarnArt Baby cotton 50g/165m, color 433 (mustard) - for the dress.
- YarnArt Baby cotton 50g/165m, color 408 (dark brown) - for the shoes and bag.
- YarnArt Baby cotton 50g/165m, color 407 (light brown) - for the bag.
-4-
Arms:
increase in round 10
-5-
Legs + Body:
Right leg.
1Rnd: ch7, start on the second chain from the hook: 5sc, 3sc in the last chain, on
the other side of the chain – 4sc, inc (14)
2Rnd: inc, 4sc, 3inc, 4sc, 2inc (20)
3Rnd: sc, inc, 4sc, (sc, inc)*3, 4sc, (sc, inc)*2 (26)
4Rnd: 2sc, inc, 4sc, (2sc, inc)*3, 4sc, (2sc, inc)*2 (32)
Prepare your insoles. I use soft plastic cutting boards. Circle the crocheted piece,
cut out. Make 2 pieces.
-6-
16-26Rnds: 20sc (11 rounds)
27Rnd: (3sc, dec)*4 (16)
Crochet a few extra sc (I have 4sc) so that the marker is in the back in the middle.
28Rnd: 6sc, 4inc, 6sc (20) - increases are located exactly in the middle in front.
29Rnd: 20sc
30Rnd: 9sc, dec, 9sc (19) – decrease in the middle in front.
31Rnd: inc, 4sc, inc (on the side), 8sc, inc (on the side), 4sc (22)
32-40Rnds: 22sc (9 rounds)
Crochet a few extra sc (I have 8sc) so that the marker is on the side (see photo).
Fasten off on the right leg and cut the yarn.
Crochet the left leg in the same way as the right one, but do not cut the yarn, but
continue crocheting. Place a marker.
-7-
41Rnd: 11sc on the left leg, ch3, connect with the
right leg.
Crochet 22sc on the right leg, 3sc on the chain, 11sc
on the left leg (50)
42-50Rnds: 50sc (9 rounds)
51Rnd: 4sc, dec, (8sc, dec)*4, 4sc (45)
52-53Rnds: 45sc (2 rounds)
54Rnd: dec (on the side), 22sc, dec (on the side),
8sc, dec (in the middle of the back), 9sc (42)
55-64Rnds: 42sc (10 rounds)
65Rnd: 35sc – short round (you can have another
number of stiches). Replace the marker. It will run in
the middle of the back.
In the next round, join the arms. Make sure that they are located symmetrically on
the sides of the body. The fingers are looking at you.
66Rnd: 7sc, 6sc on the inner side of the arm and body, 16sc, 6sc on the inner side
of the arm and body, 7sc (42)
67Rnd: 7sc, 6sc on the arm, 16sc, 6sc on the arm, 7sc (42)
-8-
Prepare the wire with a diameter of 1.5 mm and 25 cm long. Fold the edges as
shown in the photo. Try on the frame in the arms (your length may vary). Isolate
the frame, as per the photo, with adhesive plaster. Insert into the arms. Add fiberfill
to the arms.
-9-
Head:
-10-
Ears:
Make needle sculpting, focusing on the photo. Take a long strong thread. In this
case, I used the same yarn as for the doll. Insert the needle as close to the eyes
as possible.
Points 5 and 6 are located in the last round of the head, in the front in the middle.
Insert the needle at point 5 and exit it through point 1. Then insert the needle at
point 2 and exit it through point 6. Now tighten the second eye. Insert the needle at
point 5 and exit through point 3. Then enter at point 4 and exit through point 6. Pull
the ends very gently, trying to pull the eyes evenly and not too much. Tie a knot
and hide inside the part.
-11-
Embroider the nose.
Mark 2 points with pins, they are located between rounds 22 and 23 of the head,
the distance between the points is 3sc. Make two stitches with body color thread
from one pin to the other.
Using a needle, wrap these stitches with the same thread.
-12-
Hair Wig:
-13-
Using 2 sl st go to the next round. Work in front loops of Rnd 5: (ch50, from the
second chain on the hook: 49sl st, skip one stitch on the base, sc)*14
Using 2 sl st go to the next round. Work in front loops of Rnd 3: (ch50, from the
second chain on the hook: 49sl st, skip one stitch on the base, sc)*8
Using 2 sl st go to the next round. Work in front loops of Rnd 1: (ch50, from the
second chain on the hook: 49sl st, skip one stitch on the base, sc)*3
Fasten off and cut the yarn, weave in the ends.
-14-
Try on the wig on the head. Fix each strand of the last round with pins. Place short
strands in front. Next, close the gaps between the strands with a few strands of the
next round at the back (see photo). Sew the lower strands to the head.
-15-
Dress:
-16-
5Row: t-ch, 3sc, inc, (6sc, inc)*5, 3sc (48)
Next, work the rest rows with DC stitches.
6Row: 2 t-ch, in front loops: 3dc, dcinc, (7dc, dcinc)*5,
4dc (54)
7Row: 2 t-ch, (4dc, dcinc)*10, 4dc (64)
8-9Rows: 2 t-ch, 64dc (2 rows)
Join in the round with a sl st, next work in rounds, start
each round with ch2 and connect the round with a sl st.
-17-
Panties:
-18-
Using the yarn end from the beginning sew the panties on both sides (see photo).
Sew decorative bows from 3mm ribbon on the front or on the sides.
-19-
Shoes:
Take a large eye needle, insert a satin ribbon 10mm wide, 25cm long into it. Pass
the needle between SC stitches in the front in the middle (see photo). Tie a bow.
You can sew a bow in the middle with a sewing thread so that it does not untie.
-20-
Bag:
-21-
Fold the crochet piece as shown in the photo. Attach the pink/brown yarn and
crochet 7sc through both sides of the bag together. Ch55. Next, also 7sc through
both sides of the bag. Pay attention that the chain of ch55 is not twisted.
Sew a button on the front of the bag.
If your bag won't open, then sew the edges and decorate them.
-22-
If the toy is not intended for small children, then you can make earrings.
I use metal rings for beads for the base or a simple wire of a suitable diameter,
bent into a ring. For decoration, you can use seed beads or other decorative
pieces. First, thread the seed bead into the ring. I use scissors to spread the ends.
Next, insert the earrings into the doll's ears. Pinch the edges with pliers.
-23-
Your Monica is ready!
-24-