PRINTING TECHNOLOGY MuLTIPLE TYPE QuEsTIONs PART 1

1. Printing press which uses a continuous roll of paper rather than individual precut sheets ?
(A) Duplicator (B) Cassette Press (C) Carousal Press. (D) Web offset Press
Ans: D

2. Tiny dots that make up a digital image is called

(A) Pixel. (B) Bit. (C) Mbit. (D) Byte
Ans: A

3. Spatial arrangement of components of radiant energy in order of their wavelengths is called

(A) Amplitude (B) Spatial displacement (C) Electromagnetism. (D) Spectrum
Ans: D

4. Which of these is a measurement of the amount of data that can be transferred in one second?
(A) Band (B) M-Band (C) NFS. (D) Baud
Ans: D

5. Capital letters of the same height of lowercase letters are called

(A) Lower Caps (B) Middle Caps (C) Small Caps (D) Base Caps
Ans: C

6. Which of these is a set of program that let all the different parts of a computer talk to each
other ?
(A) BIOS (B) BLAN (C) BINARY OS (D) SCSI
Ans: A

7. The process of manufacturing a new print run, identical to the previous one, to add to the stock
in warehouse which do not get a new ISBN is called
(A) Replenish (B) Add per se (C) Reprint (D) Book print
Ans: C

8. Which of the statements is a perfect definition of Recto ?

(A) Center spread of the book (B) Left hand page of a book
(C) Right hand page of a book. (D) Section separator
Ans: C

9. The folded section that you get after the sheet has been printed and folded
(A) Stacked proof (B) Binding system (C) Briefcase (D) Signature
Ans: D

10. Which of these is the expansion of HIPS ?

(A) High Intensity Pulsed Setter (B) High Impact Polyester
(C) High Impact Polystyrene (D) High Intensity Particle
Ans: C

11. When you think about big, expensive, camera, DSLR comes into your mind ? What is the
expansion of DSLR ?
(A) Digital Stock Lens Refractive (B) Digital Single Lens Refractive
(C) Digital Single Lens Reflex (D) Dynamic Slot Less Reflex
Ans: C

12. A left hand page of a book which always carry even folio is called ?
(A) Verso (B) Recto (C) Facto (D) Folio
Ans: A

1 Made By – Manish Kumar

13. Name the defect where text and images are visible through the page because the paper is not
sufficiently opaque ?
(A) Show through (B) Sicut (C) Sight depth (D) Backup
Ans: A

14. Illustrated dust cover wrapped around a hard bound book is called
(A) Blurb (B) Cover (C) Wrapper (D) Jacket
Ans: D

15. Which is the property of fluids determining its resistance to flow ?

(A) Friction coefficient (B) Resistivity (C) Demulsibility (D) Viscosity
Ans: D

16. Expensive paper made from textile fibers like cotton or linen is called
(A) Fabric paper (B) Textile paper (C) Woodless paper (D) Rag paper
Ans: D

17. Which of these is relevant for monograph publication ?

(A) ISNS (B) ISM (C) ISBN (D) ISSM
Ans: C

18. Paper in which cellulose fibers are parallel the shortest edge of the sheet ?
(A) Cross Grain (B) Short Grain (C) Small Grain. (D) Parallel Grain
Ans: B

19. Transmitting no optical radiation is called

(A) Black-Out (B) Transcence (C) Opaque. (D) Pearlscent
Ans: C

20. Name the printing system where text and images are printed by firing small drops of liquid ink
at the paper ?
(A) Archiac Printing (B) Ink Jet (C) Acroma Jet (D) Laser
Ans: B

21. Expansion of ABS is

(A) Acetonitrile Butamethyl Styrene. (B) Acrylonitrile Butadiene Styrene
(C) Acrylonitrile Butyl Styrene (D) Acrylonitride Butadiene Styrene
Ans: B

22. Reduction of transparency of a specimen due to the presence of particulate matter is called
(A) Occulate. (B) Durascent
(C) Turbidity (D) Translucent
Ans: C

23. Which of these binding processes allows books to lie flat ?

(A) Case binding. (B) Spiral binding
(C) Adhesive binding. (D) Perfect binding
Ans: B

24. Unedited text delivered by an author is called

(A) Manuscript (B) House proof (C) Typescript (D) Author proof
Ans: A

25. ISO in a digital camera is meant for controlling

(A) Sensor Sensitivity (B) Amount of light
(C) Light exposure (D) Shutter speed
Ans: A

2 Made By – Manish Kumar

26. Which of these is an example for spot color systems ?
(A) HKS (B) Swatch
(C) GATF (D) MAYA
Ans: A

27. A substance that speeds up a chemical reaction without being consumed itself in the reaction
(A) Catalyst. (B) Reactant (C) Solute. (D) Dissolvent
Ans: A

28. A change in color with change in temperature

(A) Redline (B) Thermochromism
(C) Thermosaturation. (D) Color coefficient
Ans: B

29. What is the expansion of HTTP ?

(A) Hyper Text Terminal Protocol (B) Hyper Text Transport Protocol
(C) Hyper Text TelNet Protocol (D) Hyper Text Transmission Process
Ans: B

30. Selective Laser Sintering (SLS) is related to which of these

(A) Optical Drives (B) Subtractive Manufacturing
(C) Dynamic Digital Printing (D) 3D Printing
Ans: D

31. The hole inside the lens of a camera that opens and closes to control the amount of light
entering the camera is called
(A) Sensor Gap. (B) Aperture
(C) Wide converter (D) Eye lens
Ans: B

32. A short last line of a paragraph which appears at top of the page or column is called
(A) Orphan Line. (B) Step line
(C) Widow line. (D) Smooch line
Ans: C

33. Fancy way of saying internet address

(A) URL (B) Protocol
(C) US(B) (D) TCP
Ans: A

34. Which of these methods involves passing paper through a press twice but using one same
plate each time to print two complete signatures on each sheet ?
(A) Work and turn. (B) Pertecting
(C) Jumbled (D) Ups
Ans: A

35. The attribute of color by means of which a color is identified ?

(A) Warmness. (B) Hue (C) Neutral. (D) Saturation
Ans: B

36. Which of these places set standards for data communication ?

(A) ASAP (B) ASNI. (C) IES(A) (D) ANSI
Ans: D

37. The bound edge of a book is called

(A) Solus (B) Spine. (C) Bulk. (D) Fore edge
Ans: B

3 Made By – Manish Kumar

38. Name the type of illustration which contains only solid areas of black or any process color
without tints which can be reproduced without half toning ?
(A) Block image (B) UnTint art (C) Line art (D) Color art
Ans: C

39. Printing technique using toner such as a laser printer or photocopier is called
(A) Planography (B) Xerography (C) Lithography. (D) Photography
Ans: B

40. Which of the following are NOT coming in structural design of carton?
(A) End loa(D) (B) Top loa(D) (C) Display outer. (D) Collapsible
Ans: C

41. The water manes are created using ___________

(A) Dancing roll. (B) Dampening roller (C) Dandy roll. (D) Distributed roll
Ans: C

42. The splitting property of an ink film is called ________

(A) Viscosity (B) Thixotrophy (C) Ink fly (D) Tack
Ans: D

43. Blanket hardness is measured using ___________

(A) Shore hardness meter. (B) Gauge hardness tester
(C) Feeler gauge tester . (D) Screw gauge
Ans: A

44. Kaizen is known as

(A) The continuous improvement process. (B) Production tracking
(C) Plan Do Check Act (D) Quality assurance
Ans: A

45. The term hydrophilic means

(A) ability to printing ink to dissolved during printing process
(B) characteristic of printing solutions to dissolve in special chemicals under high temperatures
(C) having a tendency to mix with, dissolve in, or be wetted by water
(D) measurement of level of water content in printing inks
Ans: C

46. What is the term given to the trouble-free interaction between the ink and the press, the paper
and the press and finally, the ink and paper?
(A) Smooth running (B) High performance job (C) Trouble shooting (D) Runnability
Ans: D

47. Which of the following is FALSE about tack?

(A) It is the stickiness of an ink, or the force required to split an ink film between two surfaces
(B) Tack determines whether the ink will pick the surface of the paper
(C) Ink tack that is higher than the strength of the paper surface is highly recommended
(D) Tack affects whether ink will trap properly in multi-color printing
Ans: C

48. IGT printability tester is to test

(A) Ink fly (B) Ink mist. (C) Hickins (D) Pick resistance
Ans: D

49. Copper is good affinity to

(A) Water (B) Ink (C) Buffer solution. (D) Phosphoric acid
Ans: B

4 Made By – Manish Kumar

50. Resistance to flow known as_____________.
(A) Trap (B) Tack (C) Viscosity (D) Scum
Ans: C

51. Brightness of paper substrates are measured at _________ in brightness tester.

(A) 90° (B) 180° (C) 45° (D) 75°
Ans: A

52. The primary fibers are __________ pulp.

(A) Mechanical (B) Recycled (C) Reuse (D) Grained
Ans: A

53. San Serif is called ________________.

(A) with Serif (B) Counter (C) Stem. (D) Without serif
Ans: D

54. Line spacing is also referred as _______________.

(A) Ligature. (B) Kerning. (C) Leading. (D) House style
Ans: C

55. Height of the type is

(A) 0. 791''. (B) 0. 918''. (C) 0. 189''. (D) 0. 819''
Ans: B

56. Frequency modulate screening is also referred as ________ screening.

(A) Stochastic (B) Pattern. (C) Hybri(D) (D) Autotypical
Ans: A

57. The difference in highlight and shadow area is called

(A) Grayness. (B) Lightness. (C) Contrast (D) Hue
Ans: C

58. Resolution is referred as _____________.

(A) dot per inch. (B) pixel per inch
(C) lines per inch. . (D) all of the above
Ans: D

59. The reverting a screen into a continuous - tone file is called as

(A) Copy dot. (B) Mixed mode (C) Descreening (D) Digitizing
Ans: C

60. Pixels are called

(A) Circle dots. (B) Elliptical dots
(C) Round dots. (D) Digital dots
Ans: D

61. PDF files are interpreted by ___________

(A) PP(D) (B) DCS. (C) PS. (D) RIP
Ans: D

62. CMYK color ink is termed as

(A) Spot color. (B) Process color
(C) Fake color. (D) Pentagon color
Ans: B

63. Purity of colour is called

(A) Saturation (B) Hue (C) Lightness (D) Grayness
Ans: A
5 Made By – Manish Kumar
64. 6 pica is equal to
(A) ½ inch (B) 1 inch (C) 1½ inch (D) 2 inch
Ans: B

65. Which colour space is perceptually uniform?

(A) RGB (B) CMYK (C) Yxy (D) CIE Lab
Ans: D

66. If the angle of incident and angle of reflection is same then it is called as
(A) Specular reflection. (B) Diffused reflection
(C) Refraction. (D) Transparent
Ans: A

67. If the tristumiluse value X =10, Y = 12, Z = 8 find the x and y co-ordinates of `"Y_{xy}"` colour
space
(A) 0. 3, 0. 4 (B) 0. 4, 0. 3
(C) 0. 5, 0. 3 (D) 0. 3, 0. 5
Ans: A

68. Ideal black body radiator is also referred as __________ radiator

(A) Specular. (B) Planckian
(C) Refraction (D) All the above
Ans: B

69. The difference between numerical value of color are indicated as

(A) Δ` "E"` (B) δ `"E"` (C) σ` "E"` (D) `"E"`
Ans: A

70. Which rendering intent is suitable for photographic image?

(A) Saturation intent. (B) Absolute colorimetric intent
(C) Relative colorimetri(C) (D) Perceptual intent
Ans: D

71. The colour exhibit special radiation effect depending on the illumination is called _________
(A) Metamerism (B) Fulroscene
(C) Opacity. (D) Chromaticity
Ans: A

72. Identify the incorrect pre-press operation

(A) Typesetting. (B) Proofing (C) Imposition (D) Embossing
Ans: D

73. Which of the following is not a common pre-press problem?

(A) File defined with incorrect colour (B) Scan supplied in wrong file format
(C) Missing graphics (D) Ghosting
Ans: D

74. This measures the rigidity of flutes

(A) Burst strength test. (B) Flat crush test
(C) Tear test. (D) Tensile test
Ans: B

75. Clam shell is also called as

(A) Aerosol. (B) Blister (C) Collapsible tube (D) Carton
Ans: B

6 Made By – Manish Kumar

76. In what form do imaging source like digital cameras provide images?
(A) Colour PDFs (B) RGB mode (C) CMYK mode (D) Gray scale
Ans: B

77. Why there is more number of distributor ink rolls in offset printing process?
(A) Ink milling. (B) Even distribution
(C) Dwell time setting (D) Ink drying
Ans: A

78. Indirect laser engraving process uses __________ on the copper cylinders.
(A) Light sensitive black layer. (B) Emulsion layer
(C) Carbon layer. (D) Electrostatic layer
Ans: A

79. Electro formed screen are made from

(A) Tin. (B) Nickel. (C) Antimony. (D) Aluminium
Ans: B

80. Funning the pile to reduce friction between the sheets are known as
(A) Loading. (B) Trimming (C) Transporting (D) Jogging
Ans: D

81. In cutting principle the knife work without counteracting tool

(A) knife cut (B) sheet cut (C) burst cut (D) flat cut
Ans: C

82. Carousel screen printing machines are based upon

(A) cylinder bed principle (B) rotational principle
(C) oblique motion. (D) stationery bed
Ans: B

83. What problem would be encountered when the gravure cylinder is not perfectly round within a
cross section?
(A) Static imbalance (B) Dynamic imbalance (C) Non static imbalance (D) Static balance
Ans: A

84. Which of these part is used for automatically positioning a new web to the tail end of the web
being printed?
(A) Splicer. (B) Turner bar (C) Web bar (D) Folding bar
Ans: A

85. When the contact angle (θ)<90° is the measure of the wetting of solid by a liquid then it
represents
(A) Poor wetting (B) Very poor wetting (C) Moderate wetting (D) Good
wetting
Ans: D

86. Which of these process are commonly used for destination of water in press?
(A) Reverse osmosis (B) Distillation (C) Deionization (D) Osmosis process
Ans: A

87. Oscillator roller is otherwise termed as

(A) Nip roller (B) Transfer roller (C) Vibrator roller (D) Forme roller
Ans: C

88. Which of the following are coming under anti-counterfeiting packaging?

(A) Hologram (B) Electronic tag (C) RFID chip (D) All of these
Ans: D
7 Made By – Manish Kumar
89. The package system that is designed to control the growth of microorganisms
(A) Active packaging (B) Antimicrobial packaging
(C) Aerosal packaging (D) Acrylic packaging
Ans: B

90. Spine routing method is used in

(A) Calligo binding (B) Perfect binding (C) Thermal binding (D) Combing binding
Ans: B

91. The measure of force required to bend a paper through a specific angle
(A) Tensile strength (B) Stiffness. (C) Burst strength. (D) Folding
Ans: B

92. Checking the sequences of pages before a book is bounded is termed as

(A) Gathering (B) Collating. (C) Inserting (D) Stitching
Ans: B

93. The use of lead and chrome based pigment is restricted for
(A) Cosmetic packaging. (B) Industrial packaging
(C) Stationery packaging (D) Food packaging
Ans: D

94. Serval folds made parallel to each other is termed as

(A) Fan fold (B) Cross fold (C) Accordion fold (D) Zig-zag fold
Ans: C

95. Corrugated boxes uses __________ liner boar(D)

(A) Art sheet (B) Kraft (C) Maplitho (D) All of the above
Ans: B

96. A plan prepared for graphic design is called __________.

(A) Flat (B) Layout (C) Imposition (D) Design
Ans: B

97. Who is the inventor of type used for printing ?

(A) Johann Gutenberg (B) William Caxton. (C) Ira Rubel (D) Benjamin Bailey
Ans: A

98. Name the metals used for making the type alloy.
(A) Aluminium & Steel (B) Zinc, Iron & Aluminium
(C) Aluminium & Lead (D) Lead, Tin & Antimony
Ans: D

99. Define DPI in photographs :

(A) Direct Image processing (B) Desk Top Publishing
(C) Dots per Inch (D) Direct Print Imaging
Ans: C

100. In press CTP system means :

(A) Computer to Print (B) Computer to plate
(C) Central Trial Printing (D) Computer to Proof
Ans: B

8 Made By – Manish Kumar