Costuming:BH Boba Fett-ESB

From 501st Legion Databank
crlblackhd.gif
 
Boba Fett, ESB
ESB Fett FullBody.png
Model BH 91878, Photo by Mike Evans
 
Visit the Gallery for this Costume for more models and parts views.


Bounty-Hunters-Guild.png

Description: Boba Fett, ESB
Prefix: BH
Detachment: Bounty Hunters Guild
Context: Star Wars Episode V The Empire Strikes Back
Boba Fett, the unaltered clone of Jango Fett was one of the most feared bounty hunters in the galaxy. He is most famous for delivering Han Solo to Jabba the Hutt and his known proclivity for disintegrations.

Boba Fett's costume is one of the most complicated in the 501st and is considered to be the flagship of the BHG. Please note that there are multiple variations of the suit and costumers are required to be consistent to a particular set of references.


For 501st membership, only the requirements in black need to be met.

The Bounty Hunters’ Guild defines an additional optional level of costuming excellence. In the page below, requirements for Level 2, referred to as “Infamous”, are listed in blue. These optional requirements are meant for those who strive to meet the highest level of screen accuracy. Please visit the BHG web site for a full description of these standards.


This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.


  • This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
  • GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
  • Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
  • Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
  • Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.


Required Costume Components

The following costume components are present and appear as described below.


ESBHelmet2x2.png Helmet
  • The dome and lower cheeks are a light olive green color (Similar to PMS 624 UP).
  • The mandibles, head band and key slot area are a dark red/burgundy color (Similar to PMS 484 C).
  • The upper cheeks appear black in color.
  • In the front of the helmet, above the head band, are two “turn signal” details painted to match visual references.
  • Helmet has a dark colored, full one piece "T" visor.
    • Facial features are not visible through the visor.
  • Helmet has 14 "kill stripes" on left side of helmet, painted yellow and transitioning from yellow (Similar to PMS 116 U) to orange (Similar to PMS 152 CP), as they progress towards the back of the helmet.
  • The helmet back panels are primarily a darker green in color (Similar to PMS 553CP) with the appearance *of heavy scraping, exposing multiple layers.
  • There are keyhole slots in the rear of helmet that have the visible appearance of a circuit board, identical to or closely resembling the correct MQ-1 calculator piece (or cast replica) mounted behind the openings. This detail may be cast into the helmet or mounted behind cut out openings in the slots.
  • The dome features a prominent dent in the left-front portion and a distinct "cat scratch" above the front right brow.
  • Helmet has a rangefinder assembly on the right side.
    • The rangefinder stalk is metallic looking and the topper is black with a translucent lower piece, a black framed window (viewfinder) and the appearance of 2 red "lights" on the top.
  • The upper right ear encases the rangefinder attachment point and is an earthen/tan color (Similar to PMS 458 U) with a white and black upside-down "U" shape on the top portion that encompasses ESB specific lettering details. Below the upper section is a split silver section with 9 small, weathered black stripes. The lower section is the same earthen/tan color as the upper ear and is consistent with visual references.
  • The left ear is olive-green in color (Similar to PMS 5753 UP) with an upside down white "U" shape symbol containing specific lettering, on the top portion of the ear with red and white weathering showing through, closely matching visual references.
  • The right cheek has a weathered silver “Diagnostic Port” that is a small circular detail piece with 3 holes, identical to or closely resembling the correct 3-hole Borden connector installed or molded into the helmet.
  • The helmet is weathered and closely matches the visual references, both in colors and weathering patterns.


OPTIONAL Level two certification (if applicable):
  • White smudges are visible in the kill stripes and on the head band, closely matching visual reference.
  • Helmet has a real or simulated crack on upper right cheek and closely matches visual reference.
  • Yellow kill stripe over-spray closely matches visual references.
  • T-Visor is smoke grey.
  • Rangefinder stalk is made of metal.
  • Diagnostic port is an actual and accurate 3-hole Borden connector or metal replica.
  • Viewfinder window on RF is an actual Polaroid SX-70 lens or direct replica.
  • Circuit board is from an actual Casio MQ-1 calculator or direct replica.
  • Two red LEDs are flush with the top of the rangefinder with a visible alternating flashing sequence and a white light can be seen in the frosted clear bottom when the rangefinder is in the down position.
  • Right ear has an accurate Honeywell-style Micro Switch that activates the RF lights.



ESB Fett Armor.png Chest Armor
  • Consists of collar armor, left and right chest plates, a center diamond and an abdominal plate.
  • Armor has a return edge, approximately 2-3mm, giving the appearance of thickness and depth and is positioned in a way that closely resembles visual references.
  • Armor is medium/darker green base (Similar to PMS 175-15 C) with weathering that appears to expose a silver base color. The left chest and ab plate have damage displaying yellow (Similar to PMS 116 U) edges around the silver, the right chest piece, center diamond and collar do not. Weathering closely matches visual references.
  • Left chest plate has two cut out horizontal slots, the lower one to be taller and positioned as shown in visual references. Slots are backed by a red translucent piece of plastic/acrylic.
    • Chest light display slots have an illuminated digital red display, flashing in a pattern consistent with film references.
  • The right chest plate is slightly darker than the other armor pieces and has a specific emblem in the upper right, closely matching visual reference.
  • Center diamond between chest plates is a noticeably deeper green in color than the rest of the armor and has a silver rectangular center that is either painted or is a piece of plastic, painted silver, inserted in the middle.
  • Chest and ab armor attaches securely to the front of the vest with separation between the pieces as seen in visual references.
  • The collar armor shows medium-grey edges around the silver damage and appears to connect to the back plate via 4 square studs.
    • The studs may be functional connectors or decorative. If the studs are not the functional connection between collar and back plate, no other attachment method may be visible.
    • Studs are all white with one painted with a red top (1 all grey stud is ok, see below) and can be in the following combinations:
      • 3 white studs, no grey, with red top stud on outside left.
      • 3 white studs, no grey, with red top stud on outside right.
      • Red top stud on the outside right, grey on the outside left.
      • Red top stud on the inside left, grey stud on the outside left.
      • All 4 studs are white, no grey and no red top stud.


OPTIONAL Level two certification (if applicable):
  • Armor is attached to the vest via the accurate grommet method as shown in visual references.
  • Jaster’s Feather chest emblem is painted on, not a decal/sticker.
  • Center diamond's rectangular detail is a piece of plastic, painted silver, inserted in the middle.



ESB Fett Cod.png Codpiece
  • The codpiece covers the groin area and wraps around the entire front of the body.
  • Armor has a return edge, approximately 2-3mm, giving the appearance of thickness and depth.
  • Armor is medium/darker green base (Similar to PMS 175-15 C) with weathering that appears to expose a silver base color with yellow (Similar to PMS 116 U) edges around the damage. Weathering closely matches visual reference.
  • Codpiece appears to connect to the kidney plate on the sides via 2 square studs, identical in shape/size to the shoulder studs.
    • The studs may be functional connectors or decorative. If the studs are not the functional connection between cod and kidney, no other attachment method may be visible.
  • The Codpiece has a large dent in the front, and two raised rectangular details in the front upper right, matching visual references.
  • A ¾ - 1” grey or bluish grey nylon or canvas strap that runs from the bottom of the cod piece, up the back to the kidney plate, creating the “Boba thong” as seen in visual references.



ESBFett kidney.png Kidney Armor
  • Kidney Armor wraps around the entire back of the body at the waist.
  • Armor has a return edge, approximately 2-3mm, giving the appearance of thickness and depth.
  • Armor is medium/darker green base (Similar to PMS 175-15 C) with weathering that displays exposed silver base color with yellow (Similar to PMS 116 U) edges around the damage.
  • Kidney armor appears to connect to the Codpiece on the sides via 2 square studs, identical in shape/size to the shoulder studs.
    • The studs may be functional connectors or decorative. If the studs are not the functional connection between collar and back plate, no other attachment method may be visible.
  • A ¾ - 1” grey or bluish grey nylon or canvas strap that runs from the bottom of the cod piece, up the back to the kidney plate, creating the “Boba thong” as seen in visual references.



ESBFettBackplate.png Back Armor
  • Back Armor encompasses the mid and upper back areas, wrapping over the shoulders and around the lower rib cage and appears to connect under the collar armor.
  • Armor has a return edge, approximately 2-3mm, giving the appearance of thickness and depth.
  • Armor is medium/darker green base (Similar to PMS 175-15 C) with weathering that appears to expose a silver base color with medium grey edges around the damage. Weathering closely matches visual references.
  • Back Armor has two rectangular slots over the shoulder blades to allow for the jet pack straps to feed through.
  • Back Armor has curved cutout at the bottom to allow for jet pack harness/straps.



ShouldersF.png Shoulder Armor
  • Armor has a return edge, approximately 2-3mm, giving the appearance of thickness and depth.
  • Right shoulder is orange in color (Similar to PMS 152 CP), left shoulder is golden yellow (Similar to PMS 116 U). Both are weathered, closely matching visual references.
  • Shoulders have six points to the armor and curve around the upper arm.
  • Shoulder Armor attaches securely to quilted shoulder sections of the vest.
  • The left shoulder has a darkened red Mythosaur skull symbol on a white background. The ESB skull has horns that are attached to the skull.


OPTIONAL Level two certification (if applicable):
  • Mythosaur emblem is painted on, not a decal/sticker.



ESB Fett Knees.png Knee Armor
  • Armor has a return edge, approximately 2-3mm, giving the appearance of thickness and depth.
  • Knees should be different shades of yellow/yellow-orange. The left knee is yellow orange, closer to the left shoulder in color (Similar to PMS 2013U), the right knee is orange-yellow (Similar to PMS 152 CP), closer to the right shoulder. Both are weathered based on visual references.
  • Knee Armor attaches via a 3/4"-1" dirty white elastic strap around the back of the knee and weathered according to visual references.
  • Inner section forms an upside down "F" pattern as shown in reference images.
  • The left knee has 2 cylindrical dart launchers on the outside. These launchers match visual references.
  • The right knee has 1 cylindrical dart launcher on the outside (bottom position) and a tapered metal detail in the top position. These details match visual references.
  • On the left knee, the top dart has a red ring facing front. The bottom dart and the bottom dart on the right knee have a black ring matching visual references.


OPTIONAL Level two certification (if applicable):
  • Knee darts are made of metal.



JP&Harness SBS.png Jet Pack
  • Jet pack has the following main components: one center tank and two side fuel tanks, "piano keys" stretching horizontally at the top of the main body on each side of the raised center strip, one center missile/grappling hook, two side mounted directional thrusters, one beacon light (Silver with a brass color top) and one stabilizer, identical to or closely resembling the correct Michell turntable piece (Silver in color).
  • The colors for the jet pack are: medium/olive green base color matching closely to the color of the gauntlets and the dome/cheeks of the helmet (Similar to PMS 624 UP) and noticeably lighter than the armor. Black, red/burgundy (Similar to PMS 484 C) and yellow (Similar to PMS 116 U) accent colors and specific details are present with visible brown and medium grey weathering that appears to expose a silver base, all closely matching visual references.
  • Jet pack sits snugly against the back armor hanging from two rectangular rings attached to white nylon/canvas shoulder straps that exit the back armor through the two slots in the back plate located near the shoulder blades.
  • Weathering, details, greeblies, symbols and striping closely match visual references.


OPTIONAL Level two certification (if applicable):
  • A white light is lit in the beacon.
  • White symbol in lower left of jet pack is painted, not a decal/sticker.
  • JP Collar, beacon and outside thruster greeblies are made of metal.
  • The stabilizer is an actual Michell turn table sweep arm base a direct metal replica.
  • Jet pack has accurate Micro Mega Dental File or direct replica, blue in color with the top painted the same red/burgundy as the piano keys, in front of stabilizer as seen in the reference photos.
  • Jet pack is supported via accurate metal hooks that exit the rear of the upper and lower jet pack sections.
  • Jet pack is secured via an accurate scuba tank frame/harness (or replica). The jet pack attaches to the harness via a lower horizontal bar that the lower hooks on the jet pack rest on. Attached to the harness’s shoulder strapping should be weathered 1.5” white nylon/canvas straps with rectangular rings that attach to the upper hooks of the jet pack, keeping the pack in place.
  • The harness shoulder and waist straps are made of accurate black seat belt style webbing and is secured in the front by an accurate US Divers buckle or direct metal replica.



ESB Fett LeftGauntlet.png Left Gauntlet
  • Gauntlets are medium/olive green in color (Similar to PMS 624 UP), noticeably lighter than the armor and are weathered to expose a base silver color with dark grey accents as shown in visual references.
  • A calculator keypad that is silver in color, identical to or closely resembling the correct MQ-1 calculator piece appears at the wrist and is painted to match visual references.
  • A gold detail, identical to or closely resembling the correct Glenross expansion screw is mounted above the keypad that matches visual references.
  • A rocket is mounted to the top of the arm. The rocket matches visual references.
  • A flame thrower assembly is mounted on the outside of the arm consisting mainly of a mounting plate, two pipes/rods and 3 thick wires exiting the back of a black block detail piece with multiple varying color attachments all matching visual references.
  • The lower shell of the gauntlet is rounded, with rectangular indents matching visual references.
  • Any padding used should not be visible.


OPTIONAL Level two certification (if applicable):
  • If hinges are used, they should not be visible.
  • Flamethrower nozzle is clear.
  • Keypad is an actual Casio MQ-1 calculator keyboard or a direct replica and keys are painted according to visual references.
  • Rocket is made of metal.
  • Gold detail above the keypad is an actual Glenross dental expander or a direct replica.



RightGaunt2MEGsFINAL.png Right Gauntlet
  • Gauntlets are medium/olive green in color (Similar to PMS 624 UP), noticeably lighter than the armor, with black details and are weathered to expose a base silver color with dark grey accents as shown in visual references.
  • Four small silver darts, identical to or closely resembling the correct Michell turntable piece, are mounted on the top, towards the front of the gauntlet.
  • A black ovular detail protrudes from the rectangular section above the darts.
  • A black rectangular detail is present towards the top-rear of the gauntlet, in front of the plug block.
  • Two silver switches are mounted on the outside facing side.
  • A black square “window” detail is present on the top-front of the gauntlet matching visual references.
  • A black whipcord housing is mounted to the outside of the arm with white and black detail pieces as seen in visual references.
    • 2 small cylinder type knobs, identical to or closely resembling the correct MicroMega dental drills are located at the upper back of the whipcord housing, one red, one silver.
  • A vinyl reinforced hose with a cross-hatch thread pattern, approximate inner diameter of 5/8”, comes out of the top/back block piece of the gauntlet. The hose runs up under the short sleeve of the flight suit ending behind the shoulder armor, not under it.
  • Any padding used should not be visible.


OPTIONAL Level two certification (if applicable):
  • If hinges are used, they are not visible.
  • Gauntlet hose is attached via thick wire running through the hose into the block (hose itself isn’t connected to the block).
  • Front of whipcord housing has a strip of reflective copper.
  • Whipcord housing knobs are actual Micro Mega Dental files or direct replicas.
  • 2 correct momentary push-button switches are used and the tips are painted black.
  • Darts are the actual Michell sweep arm parts or direct metal replicas.
    • The tips of the two outside darts are weathered black in color, the two inside darts are unaltered.
  • The square "window" at the front of the gauntlet is cut out with a visible black backing where a small functional or non-functional light bulb is seen.
  • A slide-style square switch is seen on the inside-top of the gauntlet, matching visual reference.
    • The top of light switch is painted dark red/brown while the sides and rest of the cutout around the switch is the same green as the gauntlet.



ESB Fett Cape.png Cape
  • Khaki/beige main color (Similar to PMS 17-1128TPX) with an orange-brown stripe (Similar to PMS 1535CP), located in the middle of the cape on both sides.
  • The cape is pinned by the outer stud on the left shoulder, attached around the upper seam, between the stripe and the right side seam (facing).
  • The cape should drape 2-3” past the left knee armor strap, matching visual references.
  • Cape is square in shape and is made from a canvas, linen or wool material.
  • Cape is tattered and torn to match visual references.


OPTIONAL Level two certification (if applicable):
  • Stripe is painted on, not sewn in
  • Cape is free of any dark weathering.



FettWookieeBraidsESB.png Wookiee Braids
  • One silver/grey and two blonde braids of hair attach at the top of the right shoulder to a dark brown/black around-the-arm looping braid with it’s own downward hanging braid.
    • All braids are tied off at the ends and have loose lengths of hair that extend past the ties.
  • Wrapping colors and position on the braids is consistent with visual reference.
    • John Morton and carbon freeze scene orientation is allowed (red braid wrap on front of the right shoulder, blue on the back).


OPTIONAL Level two certification (if applicable):
  • Blonde braids are noticeably different in length and girth.
  • Both blonde braids drape towards the front.
  • A dark brown braid attaches to the looping black braid at the red wrap and the black to the brown braid at the blue wrap, overlapping each other over the shoulder.
    • The brown braid drapes around the front of the shoulder and attaches again to the black braid that drapes around the back of the shoulder, directly under the armpit with a noticeable length of loose hair hanging freely under the arm.
    • The remaining section of the black braid hangs from where the two connect and ties off with a length of black hair hanging loosely.




Vest.png Flak Vest
  • Flak Vest has appearance of shiny cotton/polyester fabric and be white/light grey in color and weathered.
  • Flak Vest closes down the middle of the back.
  • Flak Vest has short shoulder tabs to mount the shoulder armor. These tabs are quilted, running from the end of the tab up to the shoulder.
  • Flak Vest has slits cut into the back for the jet pack harness straps to feed through.
  • Vest allows for the attachment of chest, back, belly, shoulder and collar armor.
  • Vest is short enough to stop before reaching the girth belt. It is no longer than necessary to mount the armor (approximately 1/2" of vest shows below the armor).


OPTIONAL Level two certification (if applicable):
  • Vest is made of a shiny cotton/polyester looking material, the same that is used to make the neck-seal and the glove padding.
  • A functional or non-functional small grey wire is seen exiting from under the flak vest on the far left side at the hip(believed to deliver power the chest lights display), terminating straight down from the vest, underneath the ammo belt, behind the pouches and into the back of the left hip pouch.



Boba Fett neckseal.jpg Neck Seal
  • A quilted neck seal made from the same fabric as the vest.
  • Five horizontal ribs run along the seal.
  • The seal closes in the front via hooks or Velcro, or a combination of the two.


OPTIONAL Level two certification (if applicable):
  • Neck seal closes, left side overlapping the right, via two sets of hook and eye style latches, evenly spaced starting at the bottom of the neck seal with one white Velcro strip at the top inside, matching visual reference.
  • Neck Seal is made of a shiny cotton/polyester looking material, the same that is used to make the vest and the glove padding.



Flightsuit2MEG.png Flight Suit
  • The flight suit is light blue/grey (Similar to PMS 5435 CP) and is snugly fitted to the wearer.
  • The suit has long sleeves, with short sleeves on top of them.
    • Shorter sleeves have 4 rows of stitching along the cuff and a vertical seam at the front of the arm.
  • Each leg has an attached pocket at the thigh with angled flaps, angling in opposite directions
    • Pouches should not appear to be empty.
  • Each leg has small tool pockets that are open at the top, differing in width, located at the shin.
  • Either 1 or 5 rows of stitching are present at the cuff of the legs around the ankle.
  • Ties are sewn into the legs at the cuff, behind the ankle and wrap around, closing via Velcro.
  • The suit is weathered, particularly at the lower legs and thighs/pockets, matching visual references.


OPTIONAL Level two certification (if applicable):
  • Neck seal is attached to flight suit.
  • Flight suit is one piece.



ESBGirth.png Girth Belt
  • The girth belt is a deep maroonish brown (Similar to PMS 4625C), multi-strand rope belt wrapping around the front of the body.
  • In the back there is a buckle to buckle gap of 6-8 inches.
  • The girth belt has 4 gold/brass buckles on the rear, connected via black straps.


OPTIONAL Level two certification (if applicable):
  • Girth Belt is made from accurate horse girth belt.
  • Girth Belt is secured using the accurate strapping method seen in visual references.



Ammobelt.png Ammo Belt
  • A medium-dark brown leather or leather like belt that secures via Velcro in the rear.
  • The belt has 7 ammo pouches on the front (4 on left, 3 on right).
    • There are snaps on the 2nd and 4th pouches (from right to left).
  • Ammo belt has 2 decorative grommets on the back.


OPTIONAL Level two certification (if applicable):
  • Belt is made of vinyl leather.
  • Belt and pouches have a glossy finish.
  • Pouch flaps show different lengths as seen in visual references.



ESB Fett Hippouches.png Hip Pouches
  • A pouch is present on each hip, resting on the upper-outside thigh area above the flight suit thigh pouches.
  • Pouches are the same light blue/grey as the flight suit and are heavily weathered.
  • Pouches have angled flaps at the top, angling in the same direction, matching visual references.
    • Pouches should not appear to be empty.
  • Pouches hang by flaps the full width of the pouches that are mounted via Velcro (or similar material) to the inside of the ammo belt.



ESBFettgloves.png Gloves
  • Medium grey gloves with white cuffs and white quilted patches on the tops of the fingers and back of hands, matching visual references.
  • Padding on the back of the right glove is longer than the left.
  • Gloves are weathered to match visual references.


OPTIONAL Level two certification (if applicable):
  • Gloves are White Military Dress Gloves (or replicas), dyed medium grey, with the button on the inner wrist.
  • Padding on gloves is made of a shiny cotton/polyester looking material, the same that is used to make the neck-seal and the glove padding, sewn onto the gloves.



HolsterFINAL2meg.png Sidearm Holster
  • Holster is made of hard plastic, rubber, resin or fiberglass.
  • Holster closely matches visual references in size, shape, detail and strapping.
  • Holster attaches to the right side, near the ammo belt.
  • The back of the holster is cut to expose the trigger guard area of the sidearm and matches visual references.
  • All holster snaps are painted black.


OPTIONAL Level two certification (if applicable):
  • Holster is an actual Nemrod spear gun holster or direct replica.
  • The holster is attached to the scuba harness waist belt, under the ammo belt and over the girth belt.
  • Restraining strap is not ribbed and the snap is chipped to show silver base
  • Black tape (gaffer’s tape) covers the Nemrod logo, as seen in visual references.



ESB Fett Squegee.png Shin Tool: Sonic Beam Weapon
  • May be made to look as shown in the Star Wars Visual Dictionary or from original found part.
  • Weapon is white/light grey base color, lightly weathered, with orange stripe and black rectangle to match visual references.


OPTIONAL Level two certification (if applicable):
  • Tool is made from an actual Paterson squeegee.



ESB Fett AntiSecurity.png Shin Tool: Anti-Security Blade
  • May be made to look as shown in the Star Wars Visual Dictionary or from original found part.
  • The Anti-Security Blade is white/light grey base color, lightly weathered, and attached to a piece of ABS, painted black with rounded corners. Attached to the squeegee part is 2 silver rods that are knurled at the top, attached to the base of the weapon with a black tape.


OPTIONAL Level two certification (if applicable):
  • Rods are actual Michell stylus brushes or direct metal replicas.
  • White/grey piece is made from lower section of an actual Paterson squeegee.



ESB Fett Knife.png Shin Tool: Survival Knife
  • May be made to look as shown in the Star Wars Visual Dictionary or from original found part.
  • The survival knife is painted the same earthen/tan color as the right ear of the helmet.


OPTIONAL Level two certification (if applicable):
  • Survival knife is made from an actual Paterson stirrer.



4thshintool.png Shin Tool: Jetpack Adjustment Tool
  • May be made to look as shown in the Star Wars Visual Dictionary, a silver pipe that is approximately 5” long with a diameter of 3/4" or similar piece that is metallic in color and matches visual references.



ESB Fett Boots.png Boots
  • Canvas/fabric boots with black leather or leather-like piping running in 2 lines from toe to ankle.
  • Base color of the boot should be gray with the center section of the boot painted black or dark gray to match visual references.
  • Elastic U-shaped cutouts that span from the sole up to the top of the boot are present on both sides.
  • The boot has heavily weathered white, flat soles.
  • 2 forward pointing spikes attach to each boot via a mounting plate that contours to the front-side sole of the boot in the front. Spikes and plates should appear to be metal.
  • Boots, soles and spikes/plate are weathered as shown in visual references.


OPTIONAL Level two certification (if applicable):
  • Front of the boot is not rounded but trapezoidal in shape.
  • Spikes are actual Michell sweep arm parts or direct metal replicas.



Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.


ESB Fett EE3.png ESB EE-3
  • Made from a Webley MK VI Flare gun (or replica) or made to resemble the prop.
  • Flash tube or metal pipe extends from the end of the barrel roughly 4.75" and is complete with similar holes that match visual references.
  • Blaster grip is visibly brass in color.
  • ASI/Hunter or similar 4x20 scope mounted to the top.
  • Scope barrel mounts closely match visual references.
  • A functional or non-functional sling attaches beneath the grip and back of the stock via small o-rings.
  • Detail pieces installed on the sides of gun and stock match visual references.


OPTIONAL Level two certification (if applicable):
  • EE3 base is an actual Webley flare gun or a direct replica.
  • Scope mounts are the correct vintage part with tall feet or cast replicas.
  • Sling closely matches visual references and is void of any snaps or other attachment methods.
  • Two screws protrude from the underside of the front barrel mount matching visual references.
  • An actual MPP flash tube, metal replica or other flash tube closely resembling, is used as the rifles muzzle.



ESB Boba Sidearm.jpg ESB Sidearm
  • Sidearm has a reddish-brown grip and body with a silver barrel, end screw, trigger and muzzle, matching visual references.


OPTIONAL Level two certification (if applicable):
  • Sidearm is an actual Technisub Pulce 40 spear gun or a direct replica and is not the Sacros K11.






This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.

Retrieved from "https://databank.501st.com/mw501/index.php?title=Costuming:BH_Boba_Fett-ESB&oldid=28359"