Seraphin Amigurumi
Seraphin Amigurumi
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 2
* to *:
or body part.
Repeat entire sequence between
Materials Needed:
asterisks. Size: 48” x 31”!
FLO: Crochet in front loop only. Yarn: Any worsted weight yarn: MC for body and 1 or more
BLO: Crochet in back loop only. CC for additional details (horns, claws, scales, wing webbing,
YO: Yarn over.
tail). ILTY Metallic and RH stripes “Retro Stripe” for details.
FO: Fasten off.
Inv. Join: Invisible join technique. MC 1600 yards
LS: Loop stitch: Extend yarn guide finger CC: Horns, Wing webbing: 450 yards
to create desired loop size. Insert CC: Claws, Scales: 300 yards
hook through stitch, weave hook 21mm oval or slit pupil safety eyes.
behind nearest strand, around to the
front of the far strand, grab far strand
Hook- Size: Susan Bates (D) 3.25mm
with hook and pull strand to the back Stuffing: 3 lbs. Poly-fil (I used Poly-fil brand Crafters Choice
around the nearest strand and dry polyester packing fiber fill) its stuffs solid and sturdy.
through stitch, pull yarn tail to adjust Darning needle.
loop size as needed, finish stitch as
1 3/4-inch T-pins for joining. (Recommended)
you normally would.
hdc LS: Half double crochet loop stitch (yarn Wings: 12-gauge galvanized wire (hardware store) and needle
over, then regular LS). nosed pliers.
BOB: Bobble stitch: (3dc are joined
together in the same stitch unless
otherwise indicated).
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 3
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 4
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 5
• Eyebrows are created using surface crochet, beginning toward center of the face, at a diagonal, toward and past
the top of the eye.
• Locate the area that is even with the bottom of the eye and 1-2 st away from the middle. Use surface crochet
around the posts of the stitches.
• You will be working one eyebrow toward the back of the head then turn around so you can work the second
side the same way (beginning in front).
• [] indicates [around the same post].
• NOTE: Eyebrow placement will depend on your own personal preference and the size and placement of your
particular eyes.
• If you are unsure of eyebrow placement, make a loose chain of 12; Use this as a guide to see how they will
appear and mark your location.
• Join with a slst, [hdc x 2], [dc x 3] x 3, [tr x 3] x 2, (you should be about to curve closely over the top of the eye at
this time); [tr x 3] x 3, pull last tr around to frame other side of eye and sl st to join. (27 incl. 2 slst) Repeat for
second eye. Stitches around the post should align next to each other front to back, rather than all spread out.
This gives it a nice serrated texture.
Ear: Make 2. In MC; Use a running yarn stitch marker along the edge of the ear to help locate the center front for
placement.
Round 1: sc x 4 in MR. (4)
Round 2: sc x 4. (4)
Round 3 sc x 2, sc inc x 1, sc x 1. (5)
Round 4: sc x 5. (5)
Round 5: sc x 2, sc inc x 1, sc x 2. (6)
Round 6: (sc x 2, sc inc) x 2. (8)
Round 7: (sc x 3, sc inc) x 2. (10)
Round 8: sc x 3, sc inc x 2, sc x 3, sc inc x 2. (14)
Round 9: sc x 5, sc inc x 2, sc dec x 1, sc x 1, sc dec x 1, sc inc x 2. (16)
Round 10: sc x 6, sc inc x 2, sc dec x 1, sc x 2, sc dec x 1, sc inc x 2. (18)
Round 11: sc x 7, sc inc x 2, sc dec x 1, sc x 3, sc dec x 1, sc inc x 2. (20)
Round 12: sc x 8, sc inc x 2, sc dec x 1, sc x 4, sc dec x 1, sc inc x 2. (22)
Round 13: sc x 9, sc inc x 2, sc dec x 1, sc x 5, sc dec x 1, sc inc x 2. (24)
Round 14: sc x 10, sc inc x 2, sc dec x 1, sc x 6, sc dec x 1, sc inc x 2. (26)
Round 15: sc x 10, sc inc x 2, sc dec x 2, sc x 4, sc dec x 2, sc inc x 2. (26)
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 6
IN CC:
Round 1: Third loops only:
• Flip piece inside out for this row if you need help to make third loops visible (you will be working toward the
closed end in the same direction you normally would).
• Join to the THIRD loop of a hdc from round 4 (these should now be the uppermost loops visible to you).
• sc x 18; flip piece back to right side facing. (18)
Round 2-6: In BLO; sc x 18. (18)
Round 7: (sc x 1, sc dec) x 3, (sc x 2, sc inc) x 3. (18)
Round 8: sc x 18. (18)
Round 9: (sc x 1, sc dec) x 3, (sc x 2, sc inc) x 3. (18)
Round 10: sc x 18. (18)
Round 11: (sc x 1, sc dec) x 3, sc x 9. (15)
Round 12: sc x 15. (15)
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 7
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 9
Body: in MC.
Round 1: sc x 6 in MR. (6)
Round 2: sc inc x 6. (12)
Round 3: (sc x 1, sc inc) x 6. (18)
Round 4: (sc x 2, sc inc) x 6. (24)
Round 5: (sc x 3, sc inc) x 6. (30)
Round 6: (sc x 4, sc inc) x 6. (36)
Round 7: (sc x 5, sc inc) x 6. (42)
Round 8: (sc x 6, sc inc) x 6. (48)
Round 9: (sc x 7, sc inc) x 6. (54)
Round 10: (sc x 8, sc inc) x 6. (60)
Rounds 11-15: sc x 60. (60)
Round 16: sc x 7, (sc inc, sc x 2) x 2, sc x 3, (sc x 2, sc inc) x 2, sc x 16, (sc inc, sc x 2) x 2, sc x 3, (sc x 2, sc inc) x 2, sc x 7.
(68)
Round 17: (sc inc, sc x 1) x 3, sc inc x 1, sc x 54, sc inc x 1, (sc x 1, sc inc) x 3. (76)
Rounds 18-31: sc x 76 for 14 rounds. (76)
Re-center: sc x 3 (or as needed) to re-center work; Move marker and keep it there until next re-center point. (3)
Round 32: sc x 10, (sc dec, sc x 2) x 2, sc dec x 1, sc x 36, sc dec x 1, (sc x 2, sc dec) x 2, sc x 10. (70)
Round 33: sc x 25, sc dec x 1, sc x 3, sc dec x 1, sc x 2, sc dec x 1, sc x 2, sc dec x 1, sc x 3, sc dec x 1, sc x 25. (65)
Round 34: (sc inc, sc x 3) x 2, sc inc x 1, sc x 47, sc inc x 1, (sc x 3, sc inc) x 2. (71)
Round 35: sc x 27, (sc dec x 1, sc x 2) x 2, sc3tog, (sc x 2, sc dec x 1) x 2, sc x 25. (65)
Round 36: sc x 1, (sc inc, sc x 3) x 2, sc inc x 1, sc x 46, sc inc x 1, (sc x 3, sc inc) x 2. (71)
Round 37: sc x 27, (sc dec x 1, sc x 2) x 2, sc3tog, (sc x 2, sc dec x 1) x 2, sc x 25. (65)
Round 38: sc x 1, (sc inc, sc x 3) x 2, sc inc x 1, sc x 46, sc inc x 1, (sc x 3, sc inc) x 2. (71)
Rounds 39-40: sc x 71. (71)
Round 41: sc x 28, (sc dec x 1, sc x 2) x 2, sc3tog, (sc x 2, sc dec x 1) x 2, sc x 24. (65)
Round 42: sc x 3, (sc inc, sc x 3) x 2, sc inc x 1, sc x 44, sc inc x 1, (sc x 3, sc inc) x 2. (71)
Rounds 43-44: sc x 71. (71)
Re-center: sc x 3 (or as needed) to re-center work; Move marker and keep it there until next re-center point. (3)
Round 45: sc x 26, (sc dec x 1, sc x 2) x 2, sc3tog, (sc x 2, sc dec x 1) x 2, sc x 26. (65)
Round 46: (sc inc, sc x 3) x 2, sc inc x 1, sc x 47, sc inc x 1, (sc x 3, sc inc) x 2. (71)
Rounds 47-52: sc x 71. (71)
Round 53: sc x 47, hdc 24. (71)
Round 54: hdc x 28, sc x 43. (71)
Round 55: sc x 48, hdc x 23. (71)
Round 56: hdc x 29, sc x 42. (71)
Round 57: sc x 49, hdc x 22. (71)
Round 58: hdc x 30, sc x 41. (71)
Rounds 59-64: sc x 71. (71)
Re-center: sc x 5 (or as needed) to re-center work; Move marker and keep it there until next re-center point. (5)
Round 65: (sc dec, sc x 3) x 2, sc dec x 1, sc x 47, sc dec x 1, (sc x 3, sc dec) x 2. (65)
Round 66: sc x 25, (sc inc x 1, sc x 2) x 2, sc inc x 1, sc x 1, sc inc x 1, (sc x 2, sc inc x 1) x 2, sc x 25. (71)
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 10
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 11
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 12
Finishing tail piece in sections: At this point the piece will be divided
into THREE separate parts; one spike trail off each edge, and the
middle section which will join over the tip of the tail. Flatten tail piece
so top edges line up evenly. Divide as follows:
• Count 8 stitches over from working edge; place one marker
through both sides at 8th st. This is one spike.
• Count 8 stitches over from opposite edge, place one marker
through both sides at 8th st. This is the second spike.
• You should have 5 stitches remaining on each side in the center
(between stitch markers). This will be your tail join section.
• You will be crocheting each section separately in rounds.
• sc from current location including stitch marker in 8th stitch on
the first side. End round and move to First Edge.
• Stuff lightly as you go
First edge:
Round 1: Turn work so you are looking at the second stitch in the stitch marker (second side); sc x 16, place marker. (16)
Round 2: sc x 16.
Rounds 3-5: sc dec x 1, sc x 5, sc inc x 2, sc x 5, sc dec x 1. (16)
Round 6: sc dec x 2, sc x 3, sc inc x 2, sc x 3, sc dec x 2. (14)
Round 7: sc dec x 2, sc x 2, sc inc x 2, sc x 2, sc dec x 2. (12)
Round 8: sc dec x 2, sc x 1, sc inc x 2, sc x 1, sc dec x 2. (10)
Rounds 9-10: sc x 10. (10)
Round 11: (sc dec, sc x 3) x 2. (8)
Round 12: (sc dec, sc x 2) x 2. (6)
Round 13: (sc dec, sc x 1) x 2. (4)
FO, weave tail end through remaining 4 stitches and pull closed, hide end.
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 13
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 14
Tail décor: Make 1 in MC using crocodile stitch. You will be placing single crocs on top of each other for part of this
piece. Turn after each row.
Row 1: Complete row 1 from scales. (1 croc)
Rows 2-3: ch x 2, sl st to center, [ch x 3, dc x 1]. Turn, ch x 3, complete 1 croc over “V” st. (1 croc)
Rows 4-7: Repeat rows 2-5 from scales. (2,3,4,3 crocs)
Row 8: ch x 5, sl st between edges of 1st and 2nd croc; [ch x 3, dc x 1], ch x 2, dc x 1 in center of 2nd croc, ch x 2, [V st]
between 2nd and 3rd croc. Turn, ch x 3, complete 1 croc, sl st to top of next dc, complete 2nd croc. (2 crocs)
Row 9: ch x 5, sl st between edges of first and second croc; [ch x 3, dc x 1]. Turn, ch x 3, complete 1 croc. (1 croc) FO
leaving an end for sewing to body.
Tail décor placement:
Place tail décor over join for tail/body on TOP of the tail. The row with 4 crocs should sit over the seam, with the 3 single
crocs along the top of the tail. Pin in place; sew to body/tail in the same fashion as scales and FO.
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 16
Toes: Make 3 for each foot in MC. Do not fasten off on the 3rd toe for each set.
Round 1: Note the downward curve to the claw. Flatten claw from sides (you will have 3 st on each side) Join MC at
bottom so you are working up the 3 stitches for one side; sc inc x 6. (12)
Round 2: sc x 12. (12)
Round 3: (sc x 1, sc inc) x 6. (18)
Round 4: sc x 3, sc dec x 6, sc x 3. (12)
Round 5: sc x 12. (12)
Round 6: sc inc x 1, sc x 3, sc dec x 2, sc x 3, sc inc x 1. (12)
Rounds 7-8: sc x 12. (12)
Round 9: (beg. of knuckle) sc dec x 2, sc x 1, hdc inc x 4, sc x 1, sc dec x 1. (13)
Round 10: sc x 13. (13)
Round 11: (end of knuckle) sc inc x 3, hdc dec x 2, sc x 1, hdc dec x 2, sc inc x 1. (13)
Round 12: sc inc x 4, sc x 2, sc dec x 1, sc x 1, sc dec x 1, sc x 2. (15)
Round 13: sc x 15. (15)
Round 14: Using the 4 sets of hdc inc from round 9 as a guide (beg. of knuckle), flatten toe from sides to locate center
bottom; sc x 5 (or the number of st. needed) to get to center bottom. (5/varies). Place a stitch marker in this stitch and
FO with inv. join (if this is the third toe of the set, place marker and move on to foot/leg). Stuff toes.
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 17
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 19
Back Leg: Note-the first finishing row (Row 44) is different for each side. Make one of each in MC.
Round 1: hdc x 7, sc inc x 1, sc x 2, (sc inc x 1, sc x 1) x 2, sc x 2, (sc x 1, sc inc x 1) x 2, sc x 2, sc inc x 1, hdc x 8. (37)
Rounds 2-11: sc x 37 (37)
Re-center: sc x 11 (or as needed) to reach one side of the leg. This is your new
starting point for now; ch x 1, Turn.
Begin working in rows to form the heel area; ch x 1 and turn at the end of each
row.
Rows: 1-3: sc x 18. (18)
Row 4: sc dec x 1, sc x 14, sc dec x 1. (16)
Row 5: sc x 6, sc dec x 2, sc x 6. (14)
Row 6: sc x 5, sc dec x 2, sc x 5. (12)
Row 7: sc x 4, sc dec x 2, sc x 4. (10)
Begin working in rounds again.
Round 12: (You should have the right side facing you), sc dec x 1, sc3tog x 2, sc dec x 1 across the back of the heel; sc x 6
in ends of rows 7 through 2;
sc3tog pulling up one st in row 1, one in corner, and one in the top of foot. Sc x 17across top of foot, sc3tog on other
corner, sc x 6 in ends of rows 2-7. (35)
***Re-center: sc x 2 to reach center back***, place marker.
Round 13: sc dec x 1, sc x 6, sc dec x 1 at corner, (sc x 2, sc inc) x 2, sc x 1, sc inc x 1, sc x 1, (sc inc, sc x 2) x 2, sc dec x 1 at
corner, sc x 6, sc dec x 1. (36)
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 20
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 22
Spikes: There are 3 large, 5 medium and 3 small spikes; stop point, total and placement for each size are noted in the
instructions. Use MC or any CC for spikes.
Round 1: sc x 4 in MR. (4)
Round 2: sc x 4. (4)
Round 3: (sc inc, sc x 1) x 2. (6)
Rounds 4-6: sc x 6. (6)
Round 7: (sc inc, sc x 2) x 2. (8)
Rounds 8-10: sc x 8. (8)
Round 11: (sc inc, sc x 3) x 2. (10)
Rounds 12-14: sc x 10. (10) Small: stop here (make 3)
Round 15: (sc inc, sc x 4) x 2. (12)
Rounds 16-18: sc x 12. Medium: stop here (make 5)
Round 19: (sc inc, sc x 5) x 2. (14)
Rounds 20-22: sc x 14. (14) Large: stop here (make 3)
Spike Placement:
Neck: Begin 3 rows behind head join and end just in line with front of shoulder: Space out MED-LARGE-LARGE-MED-MED
spikes in that order. Pin in place and take a second look – make sure they form an arc shape down the neck. Sew using
the seamless technique.
Body: Begin just behind shoulder and end just behind rear hip: Space out SM-MED-LARGE-MED-SM-SM spikes in that
order. Pin in place and take a second look – make sure they form an arc shape down the back. Sew using the seamless
technique.
Wing Arm:
• Consists of Base, Wing-Elbow, and Third section which is added separately after wire insertion.
• May be stuffed or with wire.
• ***Note, using stuffing only may result in a floppier wing due to its large size***
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 23
• Using wire (or a tape measure), measure for the base. This should be the same circumference as wing arm at
round 12, plus half the diameter (to allow wire to bend into the center of the circle base before going upwards).
This does not have to be exact, it will sit on the body within the wider part so just make sure it isn’t too wide.
Note measurement: ________
• Measure for wire along the wing-arm, matching curve as needed to run down the center of the piece. Note
measurement: ________
• Measurement after wire exits the top opening should equal approximately 1.5 times the length you just noted.
This will eventually be inside the final piece of the wing support. Note measurement: _________
• Cut wire after determining total length (Add your three measurements).
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 24
Third section of wing-arm: (Make 2 in MC; this piece will be joined after it is complete); Stuff firmly every 2 inches or
so if not using wire.
Both Pieces:
Round 1: sc x 4 in MR. (4)
Round 2: sc x 4. (4)
Round 3: (sc inc, sc x 1) x 2. (6)
Rounds 4-9: sc x 6. (6)
Round 10: (sc inc, sc x 2) x 2. (8)
Rounds 11-16: sc x 8. (8) *If you are not using wire: continue to “no wire” section and stuff firmly as you go. *
Wire: Rounds 17-86.
Rounds 17-85: sc x 8. (8)
Round 86: (sc x 3, sc inc) x 2. (10) Continue to round 87: End cap
No Wire: Rounds 17-86.
Round 17: (sc inc, sc x 3) x 2. (10)
Rounds 18-86 sc x 10. (10) Continue to round 87: End cap.
End cap: both wire and non-wire
Round 87: sc inc x 5, sc x 5. (15)
Round 88: sc x 15. (15)
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 25
Large and Small Membrane: Make two large, one small; worked in rows.
• Ch x 1 at the end of the row do not count as a stitch.
• Increases are made every other row on the MARKED side of your work.
• Be SURE to count your stitches regularly, it’s easy to forget that last stitch!
• Ch x 1 and turn at the end of the row.
Row 1: ch x 3, dc x 4 in 3rd ch from hook. (4)
Row 2: esc x 4. (4)
Row 3: esc inc x 1, esc x 2, esc inc x 1. (6) Place marker on this side. Side inc are done when this marker is facing you.
Row 4: esc x 6. (6)
Row 5: esc inc x 1, esc x 4, esc inc x 1. (8)
Row 6: esc x 8. (8)
Row 7: esc inc x 1, esc x 6, esc inc x 1. (10)
Row 8: esc x 10. (10)
Rows (9-17, small membrane), (9-39, large membrane): Can you see the pattern? Continue 2 row repeat as follows:
esc inc x 1 at the beg and end of the row when you see your stitch marker, do not increase next row. Number of esc
between esc inc will go up by 2 every pattern repeat.
Continue pattern until you complete the INCREASE row where your total stitch count ends with 20 (small) or 42
(large). (FO and weave end-small membrane, ch x 3 and turn-large membrane).
Finishing large membrane: 3 rows, ch x 3 counts as a tr.
Row 1: tr x 5, dc x 6, hdc x 6, sc x 6, hdc x 6, dc x 6, tr x 6, ch x 3 turn. (42)
Row 2: tr inc x 1, tr x 5, dc x 6, hdc x 6, sc x 6, hdc x 6, dc x 6, tr x 5, tr inc x 1, ch x 3, turn. (44)
Row 3: tr x 6, dc x 6, hdc x 6, sc x 6, hdc x 6, dc x 6, tr x 7. (44) FO and weave in end.
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 26
JOINING
Joining large membranes together:
• Place membranes together front sides facing out. Starting at one edge, use both loops from each side and crab
stitch x 50 to join membranes. FO and weave ends. This is your wing vein!
Joining small and large membrane:
• Pin end of small membrane to large membrane matching outer edge of
small membrane between row 1 and 2 of tr stitches on large membrane.
Hold pieces together with front sides out. Use both loops of trim from each
side and crab stitch from outer end of large membrane to point of small
membrane. FO and weave ends.
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn
Seraphin Dragon 27
The photographs and pattern contained in this document are property of © Aimee Borst & © Manic Yarn. No unauthorized reproduction or
distribution of this pattern or content, in whole or in part, is permitted. For any additional questions regarding the use of the pattern
publication please send an email to [email protected].
You are welcome to sell items you make from my patterns. Please give proper credit to the designer at
http://www.ravelry.com/stores/manic-yarn
https://www.facebook.com/manicyarn