Crochet Pattern Dragon YarunovaYana

Crochet pattern «Plush Dragon»
Designed by Yana Yarunova

https://whiteartline.etsy.com
- Page 1 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Hello, dear crochet lover!
Thank you for purchasing my pattern! I hope it works out right, and the
crocheted Dragon will delight you and your loved ones! 😊
Be free to ask any questions according to the pattern. I will do my best to answer
you:
https://instagram.com/yarunova_toys
About the pattern
The size of the toy depends on the yarn weight and crochet hook you are
using, as well as on the crochet density. The finished Dragon using the materials
stated in this pattern is 9.84~10.62 inches / 25-27 cm tall.
I recommend crocheting two similar parts on the same day, as the crochet
density may differ on different days. Crochet the toy in continuous spirals
without turning chains. Crochet tightly so that there are no "holes" then the toy
will look neat and beautiful.
Take your time, read the crochet pattern carefully, and watch the video. I tried
to make the detailed written instruction as possible so that you can easily crochet
the same naughty Dragon! Enjoy crocheting and easy loops! 😊
Note! This is the PAID crochet pattern.
IT IS FORBIDDEN:
- Publishing the pattern under your name;
- Full or partial reproduction and distribution;
- It is not transmitted to third parties;
- Sale and share the pattern;
- Translation to other languages with the aim of selling or distributing on the
Internet.
You are welcome to publish the photos of your ready toy, credit @yarunova_toys
to my pattern is appreciated.
Thank you for understanding! Good luck in crocheting this plush Dragon.

The required materials and tools:
• Plush yarn 100g/120m:
° 1,5 skeins of the basic color (I used red Himalaya Dolphin Baby yarn
color No.80318);
° 0,7 skeins of the additional color (I used orange Himalaya Dolphin Baby
yarn color No.80316);
° white (a little bit for the eyes) - YarnArt Dolce yarn No.741;
° black for the hooves if you crochet the bright Dragon - Himalaya Dolphin
Baby yarn color No.80311 (gray color if you crochet the Dragon from the
delicate shades - Himalaya Dolphin Baby yarn color No.80325);
• DK weight yarn YarnArt Jeans
50g/160m black 53 – for the muzzle
design;
• 4 mm crochet hook;
• Sewing threads – matching the
color of the dragon (for sewing the
parts);
• Safety eyes D=18 mm;
• Stuffing material (fiberfill/
polyester);
• Tapestry needle for sewing the parts and sculpting. Sewing needle. Pins for
attaching the small parts before sewing;
• Glue;
• Scissors, pliers;
• For attaching the head:
Disks D=35 mm- 2 pcs, T-split pin 28 mm*2,5 mm - 1 pc
• For attaching the upper paws:
Disks D=20 mm- 4 pcs, Т-split pin 25 mm*2,5 mm - 2 pcs
• For attaching the bottom paws:
Disks D=40 mm- 4 pcs, Т-split pin 28 mm*2,5 mm - 2 pcs
Crochet abbreviations (US):
ch - chain;
sl st - slip stitch;
sc - single crochet;
hdc - half double crochet;
dc - double crochet;
(…)*N - repeat the required number of
times;
(х) - total number of stitches in the row;
inc - increase (2 sc in 1 stitch);
dec - decrease (2 sc together);
Make invisible decreases as guided in the illustration below:
Click the icon to open the playlist with all videos. Some videos are in
Russian, but you can choose subtitles in any desired language.
Point your smartphone camera at the QR code to watch all the videos if you
crochet from a printed document.

Head:
Crochet the spots when making the head. Crochet in a circle alternating two colors
at the same time.
For your convenience, I used the additional abbreviations.
Abbreviations (US):
Sc with A.c., dec with A.c., inc with A.c. – crochet with additional color;
Sc with B.c., dec with B.c., inc with B.c. – crochet with basic color;
Inc with A. and B.c. – increase: crochet the first stitch with the additional color
and the second stitch with the basic color;
Inc with B. and A.c. – increase: crochet the first stitch with the basic color and the
second stitch with the additional color;
HDC with A.c. – half double crochet with the additional color;
HDC with B.c – half double crochet with the basic color;
HDC inc with A. and B.c. – half double increase: crochet the first half double
crochet with additional color and the second half double crochet with the basic
color;
HDC inc with B. and A.c. – half double crochet increase: crochet the first half
double crochet with the basic color and the second half double crochet with the
additional color.
Start crocheting with the additional color yarn. The stitch marker is on the bottom
side of the head. Make sure that the marker is always in the middle. Crochet shift
stitches if needed (it means do not crochet the last stitch in the round or crochet
one extra stitch in the next round) and move the stitch marker.
Rnd 1: chain 2, start crocheting in the second chain from hook 5 sc (5)
Rnd 2: 5 inc (10)
Rnd 3: 1 sc, 3 inc, 2 sc, 3 inc, 1 sc (16)
Rnd 4: 2 sc, 4 inc, 4 sc, 4 inc, 2 sc (24)
Rnds 5-6: 24 sc (24)

Rnd 7: 24 sl st (24)
From the next round, attach the basic color yarn (I used red yarn) and place stitch
markers. We will install the safety eyes into these marked stitches later. Crochet a
few hdc after the first color change and secure the yarn tails into two knots.
Click the icon to watch the video: how to change yarn colors and crochet
the colorful spots on the head of the dragon (crochet from the 8th to the
15th rounds).
Change yarn colors as guided in the photos:
Do not complete the last single crochet stitch before changing the yarn color.
Insert the hook and grab the working yarn. There are two loops on the hook.
Grab the yarn of the second color with the hook and pull it through two loops on
the hook.
Change yarn colors as guided below, when crocheting hdc increase with different
colors:
Yarn over, insert the hook into the stitch, and start crocheting half double crochet
but do not complete it. Grab the yarn of the second color with the hook and pull
it carefully so it does not tighten the head of the dragon. Pull the yarn through
three loops on the hook. Thus, we made hdc inc with two colors.
Rnd 8: 7 sc with A.c., 2 hdc inc with B.c., place a stitch marker, hdc inc with B.c.,
hdc inc with B. and A.c., 2 hdc inc with A.c., hdc inc with A. and B.c., hdc inc
with B.c., place a stitch marker, 2 hdc inc with B.c., 7 sc with A.c. (34)
Rnd 9: 7 sc with A.c., 7 hdc with B.c., 6 hdc with A.c., 7 hdc with B.c., 7 sc with
A.c. (34)
Rnd 10: 7 sc with A.c., (inc with B.c., 2 sc with B.c.)*2, inc with B.c., 2 sc with
A.c., 2 inc with A.c., 2 sc with A.c., (inc with B.c., 2 sc with B.c.)*2, inc with B.c.,
7 sc with A.c. (42)
Rnd 11: 7 sc with A.c., 10 sc with B.c., 8 sc with A.c., 10 sc with B.c., 7 sc with
A.c. (42)
Rnd 12: 7 sc with A.c., 9 sc with B.c., 10 sc with A.c., 9 sc with B.c., 7 sc with
A.c. (42)
Rnd 13: 7 sc with A.c., 8 sc with B.c., 12 sc with A.c.,

8 sc with B.c., 7 sc with A.c. (42)
Cut the basic color yarn and secure it into the knot. Hide
the knot inside the head.
Install the eyes into the marked points. Before fastening them – please, make sure,
that they are symmetrical to the colored bulge on both sides. If not, move them to
the desired side. The eye position depends on the yarn and your crochet density.

Click the icon to watch the video: how to install the eyes and secure
them with the lighter.
Rnd 16: 42 sc (42)

Rnd 17: (5 sc, dec)*6 (36)
Rnd 18: 2 sc, dec, (4 sc, dec)*5, 2 sc (30)
Take a disk D=35 mm and T-split pin. Insert the split pin into the disk and install
it in the center on the bottom of the head between rounds 11 and 12.
Check the position of the head by following my recommendations: crochet the first
5 rounds of the body and try them on the head. Put the disk onto the split pin and
insert the split pin into the body, as guided in the photo. If you are satisfied with
its position, then put the ready part of the body aside. Stuff the head with fiberfill
and continue crocheting.

Start stuffing the head. Push the fiberfill into the muzzle with the fingers.
Rnd 19: (3 sc, dec)*6 (24)
Rnd 20: 1 sc, dec, (2 sc, dec)*5, 1 sc (18) complete stuffing the head. Distribute
the fiberfill inside the cheeks.
Rnd 21: (1 sc, dec)*6 (12)

Rnd 22: 6 dec (6) stuff with fiberfill. Break yarn, leaving a long tail for tightening
the hole. Tighten the hole, secure the yarn tails into the knot, and hide it inside.
Horns: make 2
Crochet with black yarn.
Rnd 1: chain 2 and start crocheting in the second chain from hook 5 sc (5)
Rnds 2-3: 5 sc (5)
Rnd 4: inc, 2 sc, inc, 1 sc (7)
Rnd 5: 7 sc, sl st, try the horn on the head of the dragon before fastening the work.
Perhaps, you may want to increase it and crochet the additional 1-2 rounds. Break
yarn, secure, and stuff with fiberfill, shaping a small bend with the fingers.

Small spikes (for the muzzle): make 4
Crochet with the additional color yarn.
Rnd 1: Chain 2 and start crocheting in the second chain
from hook 5 sc (5)
Rnd 2: 5 sc (5)
Turn the part right side up after the second round. Use a
wooden sushi stick to make it easier. Press the wide part
of the stick onto the middle of the 1st round and twist it, straightening out. Pull the
tip from the beginning of crocheting, cut it shorter if needed, and hide it inside the
part with the wooden stick. I clarified these points because we will crochet the
spikes later.
Rnd 3: 5 sc, sl st (5) – break yarn and pull the tail through the loop with the hook.
Hide the yarn tail inside the spike using a wooden stick.

Fins: make 2
Crochet in back and forth rows with the basic color yarn. Start crocheting each row
in the second chain from hook.
Row 1: chain 8, start crocheting in the second chain from hook sl st, 6 sc, chain 1,
turn (7)
Row 2: 3 sc, chain 3, turn (6)
Row 3: sl st, 4 sc, chain 1, turn (5)

Row 5: sl st, 6 sc, chain 1 (6)
Turn to the 1st row and crochet 5 sl st to the side. Pull the working yarn through
the loop and cut it. Tie the tails into 2 knots.

Head assembly.
Chain 60 with the additional color yarn. Cut
yarn, leaving a long tail (we need it for
unraveling and securing it).
Thread the needle with the sewing thread of the additional color and sew the chain,
as guided in the photo. Place the toy facing you. Sew it from the right to the left
eye, pulling the chain. Pay attention to the nose bridge. I sewed it two times,
making it less visible. Also, I made the additional stitches in the corners next to
the eyes. Please watch the detailed video.
Click the icon to watch the video: sew the chain to the head of the
dragon.
See the final result in the photo below. Everything is beautiful and symmetrical
from all sides. The thread of a different color is not visible.

Muzzle sculpting:
Click the icon to watch the video: sculpt the muzzle.
Thread a long sewing needle with a 3-4 ply thread of

the additional color or another firm thread.
Place the pins between rounds 4-5 and 1 sc lower.
Sculpt the first eye on the right side. Insert the needle
following the directions of the arrows.
Tighten the thread firmly and tie it into 3-4 knots.
Repeat if needed.
Thread the needle with a new thread and sculpt the
second eye on the left side. Insert the needle and follow the direction of the
arrows. Draw the thread tails to the top of the head.
The muzzle design:

Click the icon to watch the video: how to design the muzzle. Sew the
spikes, fins, and horns.
Embroider the eyes with white plush yarn. Insert the needle into the base of the
head and draw it out on the bottom of the left eye. Insert the needle into the top of
the outer side of the eye (slightly above the middle) and draw it out on the outer
side of the right eye at the same level as the left eye (watch the video).
Make sure that you are satisfied with the result and carefully apply glue with a
toothpick or needle, and pull the thread. Insert the needle to the bottom of the
second eye and draw it out to the base of the head at the initial point. Carefully
apply glue on the thread again, and glue it. Tie threads into 2 knots, and hide inside
the head using the needle or hook.

Thread a long sewing needle with plush yarn of the basic color and embroider the
eyelids for our dragon (watch the detailed video). After that, embroider the muzzle
of the dragon with black YarnArt Jeans yarn as guided in the video.
Mark the position of the fins, pin them, and sew with the sewing thread matching
the color of our dragon. Try on the small spikes, pin them, and sew on both sides.
Attach the horns between rounds 15 and 17. The distance from the horns and sewn
chain is 1 sc.

Chain 1 with the plush yarn of the additional color. Insert the hook behind the black
horn and crochet 10 sc in a circle close to the horn. Finish crocheting the round
with sl st into the first sc. Break yarn and secure it.
Click the icon to watch the video: how to crochet around the horn.
The head of the dragon is finished.
The upper paws: make 2

Start crocheting the paws from the fingers.
Make 3 fingers for each paw with the basic color yarn:
Rnds 2-3: 5 sc (5) – 2 rounds
Finish the 3rd round of two fingers with sl st. Break yarn and secure it.
Leave the working yarn on the third finger and continue crocheting the paw.
Click the icon to watch the video: how to join the fingers and crochet the
upper paws.
Rnd 4: attach the second finger, crochet 2 sc, attach the third finger and crochet 5
sc, dec (Insert the hook at the joint point between the 2nd and 3rd fingers, grabbing
the working yarn. Insert the hook in the 1st sc of the second finger, grabbing the
working yarn. There are 3 loops on the hook. Grab the working yarn and pull it
through 3 loops on the hook), crochet 2 sc to the second finger, dec (insert the hook
at the joint point between the 2nd and 1st fingers, grabbing the working yarn. Insert
the hook in the 1st sc of the first finger, grabbing the working yarn. There are 3
loops on the hook. Grab the working yarn and pull it through 3 loops on the hook),
crochet 4 sc to the first finger (15)
Rnd 5: 2 dec, 9 sc, dec (12)
Rnd 6: 12 sc (12)
Rnd 7: (1 sc, dec)*4 (8)
Rnd 8: 3 sc, inc, 2 sc, inc, 1 sc (10) – stuff the fingers with fiberfill (make sure,
that crocheted *inc, 2 sc, inc* are on the front part of the paw. Crochet shift stitches
if needed).
Rnds 9-10: 10 sc (10) – 2 rounds, stuff the upper part of the paw and shape the
bend of the paw using a wooden stick.

Rnd 11: 4 sc, 4 sl st, 2 sc (10) (make sure that 4 sl sts are in the middle on the front
side of the paw - the bend of the elbow).
Rnd 12: 2 hdc, 2 sc, 4 sl st, 2 sc (make sure that 2 hdc are in the middle on the
backside of the paw – it is the elbow).
Rnd 13: 2 hdc, 8 sc (10)
Rnds 14-15: 10 sc (10) – 2 rounds, stuff with fiberfill and shape the elbow of the
paw.
Rnd 16: 10 sc, crochet extra 2 sc, and move the marker to the middle on the
backside of the paw (10) – take a disk D=20 mm and T-split pin.
Put the disk onto the split pin and insert it in the middle on the side between rounds
15-16. Stuff the upper part of the paw gently.

If you crochet the Dragon without the split (cotter) pins, then go to page 28 for
the recommendations and video on assembling a toy with a thread joint.
Rnd 17: 5 dec, sl st (5) – break yarn and pull it out. Stuff with fiberfill, tighten the
hole using a tapestry needle, tie it into a knot, and hide inside the paw.
Crochet the second paw similarly, but insert the split pin joint on the opposite side.
The bottom paws: (make 2)

Start crocheting the paw from the fingers.
Make 3 fingers for each paw with the basic color yarn:
Rnd 1: chain 2 and start crocheting in the second chain
from hook 5 sc (5)
Finish the 3rd round of two fingers with sl st. Break
yarn and secure it.
Leave the working yarn on the third finger and
continue crocheting the paw.
Click the icon to watch the video: how to join the fingers and crochet the
bottom paws.
Rnd 4: attach the second finger, crochet 2 sc, attach the third finger, and crochet 5
sc, dec (Insert the hook at the joint point between the 2nd and 3rd fingers, grabbing
the working yarn. Insert the hook in the 1st sc of the second finger, grabbing the
working yarn. There are 3 loops on the hook. Grab the working yarn and pull it
through 3 loops on the hook), crochet 2 sc to the second finger, and dec (insert the
hook at the joint point between the 2nd and 1st fingers, grabbing the working yarn.
Insert the hook in the 1st sc of the first finger, grabbing the working yarn. There

are 3 loops on the hook. Grab the working yarn and pull it through 3 loops on the
hook), crochet 4 sc to the first finger (15)
Rnd 5: 15 sc (15)
Rnd 6: 4 sc, dec, 5 sc, dec, 2 sc (13) make sure that decreases are on the side of the
foot. Crochet shift stitches if needed.
Rnd 7: dec, 11 sc (12) – stuff the fingers.
Rnds 8-10: 12 sc (12) – 3 rounds
Start crocheting the heel in back and forth rows:

Watch the detailed video by clicking the link above: how to crochet the heel from
8:30 minutes.
Row 1: crochet 3 sc, sl st in the next stitch, chain 1, turn the work;
Row 2: start crocheting in the second chain from hook 4 sc, sl st, turn;

Row 3: 5 sc, dec (Insert the hook between rounds 1-2 of the heel. Pull the working
yarn out and insert the hook in the next stitch of the 10th round of the foot, grabbing
the working yarn. There are three loops on the hook. Crochet 1 sc through them),
turn the work;
turn the work;

turn the work;
turn the work and place a stitch marker. Make sure that the crochet direction in the
next row is similar to the crochet direction of the heel.
(See the photos on page 22).

The photos of the 6th row:
Continue crocheting the bottom paws:

yarn out and insert the hook between the next stitch of the 10th round of the foot
and heel, grabbing the working yarn. There are three loops on the hook. Crochet 1
sc through them),

crochet 2 sc (in the middle on the front side of the leg), dec (Insert the hook in the
last stitch of the 11th row and grab the yarn. Insert the hook between the 3rd and 4th
rows of the heel, grab the yarn and crochet 1 sc through three stitches on the heel.)
(12)
Make sure that decreases in rows 12-13 are in the middle on the bottom part of the
heel and increases are in the middle above the foot on the front side. Crochet shift
stitches if needed.
Row 12: 2 sc, 2 dec, 3 sc, 2 inc, 1 sc (12) – stuff the foot.
Row 13: 1 sc, 2 dec, 3 sc, 2 inc, 2 sc (12)
Rows 14-15: 12 sc (12) – stuff the heel

Row 16: (1 sc, inc)*6 (18)
Row 17: 10 sc, 6 inc, 2 sc (make sure that increases are in the middle on the front
side of the paw. Crochet shift stitches if needed).
Row 18: (3 sc, inc)*6 (30) stuff with fiberfill and shape the bends.
Rows 19-21: 30 sc (30) – 3 rows

Row 22: (3 sc, dec)*6 (24)
Row 23: (2 sc, dec)*6 (18) – take the disk D=40 mm and T-split pin. Insert the
split pin into the disk and install it in the middle on the side of the paw between
rows 20 and 21. Stuff the paw with fiberfill.
Row 24: (1 sc, dec)*6 (12) – stuff the upper part of the paw.
Row 25: 6 dec, sl st – break yarn, tighten the hole with a tapestry needle. Secure
and hide the tail.
Crochet the second paw similarly and install the split pin joint on the opposite side.

The paws design:
Click the icon to watch the video: how to design the upper and bottom
paws.
See the photo of the ready paws.
Body, assembly:
Crochet with the basic color yarn. The stitch marker is in the middle on the
backside.
Rnd 2: 6 inc (12)
Rnd 3: (1 sc, inc)*6 (18)
Rnd 4: (2 sc, inc)*6 (24)
Rnd 5: 24 sc (24)
Take the disk D=35 mm and the head of the dragon. Insert the split pin of the head
into the center of the first round of the body. Insert the split pin into the disk inside
the body and curl the ends with round-nosed pliers. Continue crocheting the body
following the pattern.
Rnd 6: 6 sc, place a stitch marker. Here, we will attach the upper paws. Crochet 12
sc, place the other marker for the second paw, 6 sc (24)
Rnd 7: (3 sc, inc)*6 (30)
Rnds 8-9: 30 sc – 2 rounds
Rnd 10: 9 sc, (1 sc, inc)*6, 9 sc (36)
Rnd 11: 36 sc (36)
At this stage, we will attach the upper paws.
Take the upper paws and 2 disks D=20 mm. Before attaching the paws, I
recommend stuffing the body and trying on the paws in the marked points
between rounds 6 and 7. If you are happy with their position, then attach the
paws to the body. If it seems a little high, then try on them lower and find the
best position. Remove the stuffing material from the body, insert the split pins
with the disks, and curl the ends using the pliers.
Rnd 12: 9 sc, (2 sc, inc)*6, 9 sc (42)

Rnds 13-17: 42 sc (42) – 5 rounds
Rnd 18: 10 sc, place a stitch marker. Here, we will attach the bottom paws.
Crochet 22 sc, place the other marker for the second paw, and crochet 10 sc (42)
Rnd 19: (5 sc, dec)*6 (36)

Stuff the upper part of the body firmly and distribute the stuffing material into the
upper part of the belly, shaping it.
Rnd 21: (3 sc, dec)*6 (24)

At this stage, we will attach the bottom paws.
Before attaching the paws, I recommend stuffing the body and trying on the paws
in the additional marked points between rounds 18 and 19. Make sure that they are
symmetrical to the upper paws and that you are happy with their position according
to their length. If the marked points are not suitable then find new points and mark
them. Remove stuffing material from the body, which may prevent attaching the
paws. Insert the split pins with the disks D=40 mm into the body and cure the ends
using the pliers. Stuff the bottom part of the body.

Rnd 23: (1 sc, dec)*6 (12)
Rnd 24: 4 dec, stuff with fiberfill, 2 dec, sl st (6) – break yarn, tighten the hole with
a tapestry needle, secure and hide the tail.
Thread-joint of the paws.

Click the icon to watch the video: how to attach the paws with a thread-
joint.
If you do not have split pin or cotter pin joints, then use a thread-joint. To do this,
assemble the head and sew it to the body so that the additional markers of the
body between rounds 6 and 18 are strictly on the sides.
Mark the position of the head and fix it with two knitting needles. Thread the
tapestry needle with a long scrap of 3-4 ply thread matching the color of the body
and sew the head with long stitches. Remove the knitting needles and make sure
that the head is attached evenly. If you are happy with its position then complete
sewing the head to the body.
Attach the upper and bottom paws with knitting needles. If you are not satisfied
with their position then mark the new points. Thread a long tapestry needle with
a firm thread and insert it in the middle of the future tail. Draw it out at the
marked point of the legs. Pierce the needle between rounds 20 and 21 of the
bottom paws, grabbing 6 stitches. Make sure that these stitches are in the middle
on the side of the paw. Insert the needle into the body at the same point where
you have placed the marker, and draw it out at the point of the second marker.
Grab 6 sc of the second bottom paw similarly, insert the needle into the
body of our dragon (at the point of the second marker), and draw it out at the
point of the first marker. Pull the paw and repeat it one more time. After that,
draw the needle out to the position of the upper paws. Pierce the needle through
the upper paw between rounds 15 and 16, grabbing 3 sc. Make sure that these
stitches are exactly in the middle on side of the paw. Insert the needle in the body
at the point of the first upper paw and draw it out on the opposite side at the point
of the second paw.
Pull the thread and insert the needle in the second paw, grabbing 3 sc. Insert
the needle into the body at the point of the second paw and draw it out at the
point of the first paw. Repeat one more time, draw the needle out in the middle
of the tail, tie the thread into two knots, and cut the excess thread. Try on the tail
and sew it.
Tail:
Crochet with the basic color yarn.
Rnd 4: 1 sc, inc, 2 sc, inc, 1 sc (8)
Rnd 5: 8 sc (8)
Rnds 7-8: 10 sc (10) – 2 rounds
Rnd 10: 12 sc (12)
Rnd 11: (3 sc, inc)*3 (15)
Rnd 12: 15 sc (15)
Rnd 13: (4 sc, inc)*3 (18)
Rnd 14: 18 sc (18)
Rnd 15: (5 sc, inc)*3 (21)
Rnds 16-20: 21 sc (21) – 5 rounds. Finish the last round with sl st, fasten off, secure
yarn, and cut it. Stuff the tail.
Wings: make 2
Crochet in back and forth rows with the additional color yarn. Start each round in
the second chain from hook.
Rnd 1: chain 2 and start crocheting in the second chain from hook 3 sc, chain 1,
turn (3)
Rnd 2: 3 inc, chain 1, turn (6)
Rnd 3: 6 sc, chain 1, turn (6)
Rnd 4: (1 sc, inc)*3, chain 1, turn (9)
Rnd 6: (inc, 2 sc)*3, chain 1, turn (12)
Rnd 8: (3 sc, inc)*3, chain 1, turn (15)
Rnd 10: (inc, 4 sc)*3, chain 1, turn (18)
Rnd 12: hdc, sc, sl st, sc, hdc, (3 dc into one stitch), hdc, sc, sl st, sl st, sc, hdc, (3
dc into one stitch), hdc, sc, sl st, sc, hdc, change to the basic color yarn.
Crochet around the wing: 12 sc, inc, continue crocheting on the other side of the
wing, 12 sc, chain 1, turn the wing, and crochet 25 sl st through the posts of the
loops.
Click the icon to watch the video: how to crochet around the wing,
crochet the stripes and sew them to the holder.
On the wrong side, insert the hook in the middle on the upper corner of the wing.
Grab the yarn of the basic color and crochet 1 sc. Crochet 14 sc along the wing on
the wrong side towards the first tip of the wing (direction No. 1). Once you reach
it, chain 1, and start crocheting 13 sc along the front part of the wing towards the
upper corner of the wing (direction No. 2). (Watch the video)
Complete crocheting to the upper corner and chain 1. Next, crochet 15 sc along the
wing on the wrong side towards the second tip (direction No. 3). Once you reach
it, chain 1 and continue crocheting 13 sc along the front part of the wing towards
the upper corner of the wing (direction No. 4). Crochet 1 sl st to the upper corner
and pull the thread through the loop, and break yarn.

Draw the threads to the wrong side of the wing with the hook and tie them into two
knots. Do this so that the ends of the thread on the upper corner of the wing are
under the wing holder when we sew it. When we look at the wrong side, the holder
must be on the right side of one wing, and the left side of the second. With that in
mind, hide the yarn tails, fasten off, and cut them. Secure with a lighter.
Holder of the wing: make 2

Rnd 1: chain 2 and start crocheting in the second chain from
hook 6 sc (6)
Rnds 2-12: 6 sc (6) – 11 rounds. Finish the last round with
sl sts. Break yarn and secure it. Hide the yarn tail inside. Do
not stuff. Crochet the second part similarly.

Thread the needle with thread matching the color of the dragon and sew the holder
to the wing. The side that we see when looking at the back of the dragon.
Heart:
Crochet 2 parts with the additional color yarn:
Rnd 2: (1 sc, inc)*3 (9)
Rnd 3: 9 sc (9)

When crocheting the first part, finish the 3rd round with sl st, break yarn and hide
the tail. Do not cut yarn of the second part and continue crocheting the heart.
Join two parts together. Put two parts with the right sides facing each other and
crochet 2 sc through both loops.
Continue crocheting as guided in the pattern:

Rnd 4: 6 sc to the part, dec (insert the hook in the 7th sc of the first part and grab
the working yarn. Pull the yarn through the joint point of two parts and make one
decrease), crochet to the second part, 6 sc, dec (insert the hook in the 7th sc of the
first part and grab the working yarn. Pull the yarn through the joint point of two
parts and make one decrease) (14)
Rnd 5: 2 sc, dec, 6 sc, dec, 2 sc (12)
Rnd 6: (1 sc, dec)*4 (8) – stuff with fiberfill
Rnd 7: 4 dec, sl st (4) – break yarn and pull the tail through the loops.
Stuff the heart with fiberfill with the wooden stick. Sew the holes of the heart
with a tapestry needle. Tie the tails into a knot, and hide the tails inside.

Sew the heart to the tip of the tail.
Sew the tail to the dragon between rounds 16 and 23.
Front part:
Work in back and forth rows with the additional color yarn. Start each row in the
second stitch from hook.
Row 1: chain 7 and start crocheting in the second chain from hook 6 sc, chain 1,
turn (6)
Row 2: 6 sc, chain 1, turn (6) – try on the front part, skipping 1 row from the head
because we need 1 additional row for crocheting around the front part.
Row 3: inc, 4 sc, inc, chain 1, turn (8)
Row 5: inc, 6 sc, inc, chain 1, turn (10) – try on
Row 7: inc, 8 sc, inc, chain 1, turn (12)
Row 9: 5 sc, inc, 6 sc, chain 1, turn (13)
Row 12: dec, 9 sc, dec, chain 1, turn (11)
Row 13: 11 sc, chain 1, turn (11) – try on and make sure that it fits on the belly
between the shoulders.
Row 16: 7 sc, chain 1, turn(7) – try on again.
Rows 18-20: 5 sc, chain 1, turn (5) - 3 rows
Row 22: 3 sc, chain 1, turn (3) – try on
Row 23: 1 sc, inc, 1 sc, chain 1, turn (4)
Row 26: 1 sc, dec, 1 sc, chain 1, turn (3)
Row 29: 1 sc, dec, chain 1, turn (2)
Row 32: dec, chain 1, turn (1)
Row 38: 1 sc (1) – chain 1 and turn the work towards the beginning of the part.
Crochet along the edge: 38 sc, inc, 4 sc, inc, 38 sc, chain 1, 1 sc along the side on
the bottom of the part, sl st in the first stitch. Pull the yarn through the loop and
fasten it off.

Pin the front part to the body of the Dragon. Thread the needle with the thread
matching the color of the front part. Attach the thread to the right edge, then sew
it under the head to the body. Do not forget that the head is movable (there is no
need to sew it to the head). Turn down and sew on. In the process, stop and make
sure that the distance from the upper paws is symmetrical on both sides. Then sew
it to the tail, paying attention to the symmetry of the space on the right and left
sides. Once you reach the tip of the tail – draw the yarn tail to the heart. After that,
sew it along the other side similarly.
Click the icon to watch the video: how to embroider the stripes on the
front part.
Thread the tapestry needle with a long plush thread of the basic color and
embroider the stripes on the front part, as guided in the video. The distance
between the stripes is 3 rows. Embroider the stripes on the tip of the tail.

Spikes for the head: make 3
Rnd 2: (1 sc, inc)*2 (6)
Rnd 3: (1 sc, inc)*3, sl st (9) – break yarn and pull the tail through the loop. Do
not stuff. Make a triangular shape of the tip of the spike with the fingers.
Spikes for the back and tail:
Crochet with the additional color yarn. Make 2 spikes for the back and one spike
for the tail.
Rnd 2: (1 sc, inc)*2 (6)
Rnd 3: (1 sc, inc)*3, sl st (9) - break yarn and pull the tail through the loop. Do
not stuff. Make a triangular shape of the tip of the spike with the fingers.
The second spike on the tail:
Rnd 2: (1 sc, inc)*2 (6)
Rnd 3: 6 sc, sl st (6) - break yarn and pull the tail through the loop. Do not stuff.
Make a triangular shape of the tip of the spike with the fingers.
The third spike on the tail:
Rnd 2: (1 sc, inc)*2 (6) - break yarn and pull the tail through the loop. Do not stuff.
Make a triangular shape of the tip of the spike with the fingers.

Pin the spikes to the head from the 18th round (along the backside of the head). The
distance between the spikes is 1 row (1 sc). Sew the spikes to the head using a
sewing needle and thread, matching the color of the head. Once you sew the third
spike – fasten off. We will sew the spikes to the back and tail with the other thread
(the head is movable).
Click the icon to watch the video: how to sew the spikes and wings.
Mark the position of the spikes on the back and sew them. Pin the spikes to the
tail: the distance between the big, middle and small spikes is 2 rounds.
Put the Dragon with the backside facing you and pin the wings below the middle
of the back between the head and tail, skipping 2 sc from the spikes before the
holder to the side (guide on your toy).
Turn to the front side and see the result. Correct the position of the wings if needed
and sew them to the back of the Dragon.
Congratulation! Your dragon is finished! I wish it gives many joys and happiness
to you and your family! :) :) :)
Thank you for crocheting with me! :) :) :)
I would very grateful for feedback in my shop!

Crochet Pattern Dragon YarunovaYana

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Crochet Pattern Dragon YarunovaYana

Uploaded by

Copyright:

Available Formats

Crochet pattern «Plush Dragon»

Designed by Yana Yarunova

- Page 1 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 2 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 4 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 5 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Rnd 13: 7 sc with A.c., 8 sc with B.c., 12 sc with A.c.,

- Page 7 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Rnd 16: 42 sc (42)

- Page 8 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Rnd 21: (1 sc, dec)*6 (12)

- Page 9 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 10 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Row 4: 3 sc, chain 5, turn (3)

- Page 11 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 12 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Thread a long sewing needle with a 3-4 ply thread of

The muzzle design:

- Page 13 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 14 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

The head of the dragon is finished.

The upper paws: make 2

- Page 16 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 17 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

The bottom paws: (make 2)

- Page 18 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Rnds 8-10: 12 sc (12) – 3 rounds

Start crocheting the heel in back and forth rows:

- Page 19 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 20 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 21 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Continue crocheting the bottom paws:

- Page 22 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 23 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Rows 19-21: 30 sc (30) – 3 rows

- Page 24 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Rnd 12: 9 sc, (2 sc, inc)*6, 9 sc (42)

- Page 26 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Rnd 21: (3 sc, dec)*6 (24)

- Page 27 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Thread-joint of the paws.

- Page 31 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Holder of the wing: make 2

- Page 32 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 33 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Continue crocheting as guided in the pattern:

- Page 34 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

Sew the tail to the dragon between rounds 16 and 23.

- Page 36 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 37 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 38 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

- Page 39 - Crochet pattern. Designed by Yana Yarunova 2023 @yarunovaˍtoys https://whiteartline.etsy.com

You might also like