DOMESTIC STEEL PRODUCER
DGTR for continuation of anti-subsidy duty on certain type of steel pipes, tubes from China, Vietnam
The Directorate General of Trade Remedies (DGTR) has recommended the extension of countervailing duties on welded stainless steel pipes and tubes from China and Vietnam to protect domestic players, citing the risk of harm to the local industry if the duty is lifted, proposing a duty of up to 29.88%.
Arcelor-Nippon says India's plan for raw material curbs ignores Red Sea crisis
ArcelorMittal's India joint venture warned New Delhi that planned curbs on low ash metallurgical coke imports, crucial for steelmaking, could harm the industry. The Red Sea crisis complicates supply chains, and the proposed 40% quota for European imports could disrupt operations. India's imports of this key steelmaking fuel have doubled in four years.
Domestic demand for steel soars in India, country turns net importer in FY24: CRISIL Report
India has shifted from being a net exporter to a net importer of steel in fiscal 2024, with a trade deficit of 1.1 million tonnes. Surging domestic demand led to increased imports from China, South Korea, Japan, and Vietnam. Despite a rise in exports, India faces challenges from Chinese competition. Strong domestic demand and production growth indicate positive prospects for the Indian steel industry. Strategic adjustments are needed to manage imports and maintain export competitiveness.
Smallcaps: Narrative might go against them, but if chosen with right filters, don't bother, 5 stocks from different sectors with long term perspective
When investing in stock markets, it’s crucial to make the distinction between high-quality and poor-quality businesses across the small, mid, and large-cap spectrums, as well as the difference between the intrinsic value of a stock and the overall value of the company. Certain niche small businesses may still generate significant returns over time if they are held long enough. On the other hand, if one's approach to small-cap investments is merely based on the absolute value of a stock with hopes of a tenfold increase, then it's a misconception. Stock market investing, whether in small, mid, or large caps, should not be driven by unrealistic expectations; otherwise, it leads to nothing but undue stress, rather than substantial returns.
Low domestic demand, Chinese dumping depress steel prices
Besides these, sustained Chinese steel output is also eating into India's share of metal exports to Vietnam and the United Arab Emirates (UAE). These are the two most prominent destinations for Indian steel products after the European Union.
Indian steel producers worry as weak domestic demand and Chinese dumping depress prices further
Indian steel makers are grappling with weak local demand and Chinese steel imports impacting exports to UAE and Vietnam. Steel prices in India under pressure due to low import prices.
- Go To Page 1
India's April-May steel imports hit five-year high on buoyant domestic demand
The surge in imports has raised concerns among Indian steel mills, prompting calls for government intervention and safeguard measures. However, the Ministry of Steel has refrained from such actions, emphasizing the strong local demand for steel. Notably, China and South Korea emerged as top exporters of steel to India in recent months, with Indian steel producers like Tata Steel expressing apprehensions about the growing influx of Chinese imports.
Global demand revival: How is India poised?
As the global demand sees some revival, India must get its act together to make the most out of it.
Own midcaps? Do a check & balance exercise to avoid decision of haste: 7 midcaps from different sectors with an upside potential of upto 49%
Every now and then the market goes through phases, where it prefers a certain set of stocks, not based on sector but based on the overall market cap. So, sometimes it is large caps, at other mid-caps. Now this partially happens, due to the flows which are coming to markets. For example, if more flows are coming to mid-cap or multicap schemes there is bound to be out performance in the mid-cap space. Now what it does is that it tends to create a sudden surge in mid-cap. Similarly when there is an outflow like the kind of one which we saw in March this year, midcap stocks tend to decline sharply. Essentially, it is the flows which impact the broader matrix of how midcaps behave. So there are phases not owning a midcap stocks appeared to sin and then there phase, where owning them appears to be sin. But if one focuses on the underlying business and some critical parameters, there is a possibility of getting rid of these phases of anxiety which keep coming to the street and create long term wealth.
China’s exports surge more than expected in boost for economy
Beijing is relying on sales abroad to offset weak consumer spending at home, where a real estate slump has led households to tighten their belts.
China risks trade war on two fronts as low-tech exports soar, too
Rising trade tensions as the EU, US, and potentially Canada impose tariffs on Chinese electric vehicles, are impacting global trade dynamics.
Fundamental tailwinds are a stronger play than volatile markets? 5 Indian pharma stocks with upside potential of up to 31 %
There is no doubt that the market is going through a volatile phase and bears are once again telling the street to never write them off. Will this correction continue even longer ? It would probably be clear by the end of the day as the election result finally gets settled. Instead of focusing on how much nifty or bank nifty or any other index is down or up, focus on the fact that whether the sector or company is doing well and will it do well in future because the fundamental operating matrix of that sector has changed for better. Because volatile phases come and go, changes in the operating matrix don't happen every day. Pharmaceutical is one sector where there is a fundamental change taking place and it has happened after 8 to 10 years of restructuring and painful readjustment. So, it would be worthwhile to have them on watchlist and if the market remains volatile then it is a sector which probably has a higher probability of outperforming.
Macro policy choices unclear, but work cut out on reforms agenda
In FY24, nominal GDP grew 9.6%, CPI inflation recorded 5.4%, and real GDP growth was estimated at 8.2%.
They just happen to be listed in India, what matters to them is global developments: 5 stocks from two sectors with upside scope of up to 29%
In the last month of volatility, there are some sectors which have shown a streak of out performance. They haven't fallen as much as nifty and have been able to keep their head above the water even on the worst of days. The reason, their bottom lines are more correlated to what is happening in the country or the continent in which they have exposure both in terms of sales and in some cases in manufacturing. So, one way to take global exposure is to have a look at these companies, also it is a sort of diversification in terms of exposure to the underlying economy. Because they are operating at a global level, their balance sheets are good and in some cases, they have been able to enter amongst the top companies of the world in their sector.
JSW Steel comes out with a new product for green energy space
JSW Steel is producing 'JSW Magsure', a zinc-magnesium-aluminium alloy coated steel product, to replace imports in India. The product, which had a demand of around 100,000 tonnes in 2023-24, is expected to reach 250,000 tonnes this year due to renewable energy. The company plans to supply 120,000 tonnes of JSW Magsure domestically and export the remaining 25,000 tonnes.
Pricey ore, tepid local demand, Chinese imports weigh on steelmakers' margins
This is the third time in the past decade that local producers are confronting such a situation. "The government has in the past imposed duties against Chinese steel products, including those being routed from countries like Vietnam," a top official of a steel company told ET, adding that the primary steel makers had flagged their concerns to theCentre.
Unstoppable bull run! Sensex, Nifty hit fresh lifetime highs on strong global market cues
Indian blue-chip indices, BSE Sensex and Nifty50, hit new record highs on Monday driven by Tata Steel, Bharti Airtel, JSW Steel, NTPC, HDFC Bank, and Kotak Bank; Wipro, Maruti, M&M, Asian Paints, and Power Grid opened lower. Adani Ports surged 3% after joining Sensex.
India only nation among top 5 to see growth in steel production
India is the only top five steel producing nation to see growth in production in April, while China, Japan, and the United States experienced a decline. India's steel production rose by 3.6% in April, with a total of 49.5 million tonnes produced from January-April this year.
10 Best Flour Mill Machines in India for fresh and pure atta
When searching for the best flour mill machine in India, several factors warrant careful consideration to ensure optimal performance and satisfaction. Efficiency stands as a primary concern, as it directly impacts the milling process's speed and effectiveness. A high-efficiency flour mill machine can swiftly grind grains into fine flour, saving both time and effort. Durability is another crucial aspect, as a sturdy and robust construction ensures the machine can withstand the rigors of frequent use without succumbing to wear and tear. So, if you want the flour mill machine scroll down for the list.
Short-term volatility? Yes, but operating landscape might be changing: 5 metal stocks with upside potential of up to 20%
After the IT sector companies, metal is another sector where the fortunes of Indian companies are more tied to what is happening globally rather than what is happening in India. The reason, global metal prices are decided by two things, first is the state of the Chinese economy and second is how the US dollar behaves in the global markets. On the first, there are initial indications that after close to more than two years, things are turning better. The most reliable indication came last month with better than expected GDP numbers. On the second front, there is still lots of uncertainty thanks to flip-flops by the US Fed on interest rate cuts. Now if one looks at the metal stocks, they have sort of out performed volatile Indian markets. But given the fact that these days, too much money flows into stocks where there is even a slight bit of positive development, the possibility that these stocks may turn volatile if there was more pressure on the broader market. However, when the tide turns, because the operating matrix of the companies would be better if the China recovery continues, there is a high probability of them turning into relative outperformers.
China’s factory glut alarms the world but there’s no quick fix
Complaints about China's factory overcapacity are growing, but Beijing is hesitant to make changes that could harm its fragile economy. The EU criticized China for overproduction, urging action in the short term. China announced plans to slow expansion in the battery industry, but they are not binding. The country insists its industries are competitive due to innovation, not subsidies, and will continue supporting high-tech sectors despite international pressure. China's surplus production, stemming from a real estate slump, poses challenges.
India's infra push to raise demand for TMT bars: Industry players
India consumed 50.3 million tonnes (MT) of TMT bars in FY23, up from 46 MT in the previous fiscal. Domestic manufacturers collectively produced 51 MT TMT bars in FY23 compared with 47.2 MT in FY22.
Coal mine auction likely in May, 30 new blocks to be put on offer
The coal ministry will auction coal mines by May 10 to boost domestic production, reduce imports, and encourage imported coal-based power plants to switch to domestic fuel, aiming for zero thermal coal imports.
Blackrock, ADIA, domestic funds hike stake in Vedanta
The world's largest asset manager BlackRock, as well as the Abu Dhabi Investment Authority, along with domestic mutual funds like ICICI Mutual Fund and Nippon India Mutual Fund have increased their holdings in Vedanta by almost 2 per cent during the last four months, said market participants.
Govt forms 14th task force to explore use of biochar in steel production
In March 2023, Union Steel Minister Jyotiraditya Scindia approved the formation of 13 task forces to identify action points for each aspect of green steel production and the adoption of sustainable manufacturing processes.
Indian steel mills seek iron ore export ban as China sales jump
Smaller steelmakers in India seek a ban on iron ore exports after a 170% surge in sales to Chinese mills inflated local prices. Fearing industry shutdowns, lobby groups from major manufacturing states request government restrictions. Second-tier producers, constituting 40% of national output, face higher input costs than top mills. Any export limits could support iron ore prices
Govt says Rs 12,900 cr invested under PLI scheme for specialty steel
About Rs 12,900 crore has already been invested in the domestic steel sector under the PLI scheme for specialty steel, an official statement said on Wednesday. In March 2023, 57 memorandum of understandings (MoUs) were signed for generating an investment of about Rs 29,500 crore in the sector by FY28.
Boosting iron ore production to meet domestic demand; no plans for China exports: NMDC
"Even though iron ore export prices are showing an increasing trend, the net sales realisations in the domestic market are superior," it said. NMDC, under the Ministry of Steel, is the country's largest iron ore-producing company, catering to around 20 per cent of the domestic demand.
India rejects iron ore miner NMDC's proposal for China exports: Sources
The government has instead asked NMDC, India's largest state-owned iron ore miner, to focus on domestic sales, said the sources who didn't wish to be named as they were not authorised to talk to the media.
Load More
